aboutsummaryrefslogtreecommitdiffstats
path: root/tests/func/bridge_domain
diff options
context:
space:
mode:
Diffstat (limited to 'tests/func/bridge_domain')
-rw-r--r--tests/func/bridge_domain/bridge_domain_untagged.robot369
1 files changed, 369 insertions, 0 deletions
diff --git a/tests/func/bridge_domain/bridge_domain_untagged.robot b/tests/func/bridge_domain/bridge_domain_untagged.robot
new file mode 100644
index 0000000000..1876d901bb
--- /dev/null
+++ b/tests/func/bridge_domain/bridge_domain_untagged.robot
@@ -0,0 +1,369 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/default.robot
+| Resource | resources/libraries/robot/bridge_domain.robot
+| Resource | resources/libraries/robot/testing_path.robot
+| Resource | resources/libraries/robot/qemu.robot
+| Library | resources.libraries.python.Trace
+| Force Tags | HW_ENV | VM_ENV
+| Test Setup | Run Keywords | Setup all DUTs before test
+| ... | AND | Setup all TGs before traffic script
+| Test Teardown | Run Keywords | Show Packet Trace on All DUTs | ${nodes}
+| ... | AND | Show vpp trace dump on all DUTs
+| Documentation | *L2 bridge-domain test cases*
+| ...
+| ... | *[Top] Network Topologies:* TG=DUT1 2-node topology with two links
+| ... | between nodes; TG-DUT1-DUT2-TG 3-node circular topology with
+| ... | single links between nodes; TG=DUT1=DUT2=TG 3-node circular
+| ... | topology with double parallel links and TG=DUT=VM 3-node topology
+| ... | with VM and double parallel links.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for L2 switching of
+| ... | IPv4; Eth-IPv6-ICMPv6 for L2 switching of IPv6 use. Both apply
+| ... | to all links.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2
+| ... | bridge-domain (L2BD) switching combined with static MACs; MAC
+| ... | learning enabled and Split Horizon Groups (SHG) depending on
+| ... | test case.
+| ... | *[Ver] TG verification:* Test ICMPv4 (or ICMPv6) Echo Request packets
+| ... | are sent in both directions by TG on links to DUT1 and DUT2; on
+| ... | receive TG verifies packets for correctness and their IPv4 (IPv6)
+| ... | src-addr, dst-addr and MAC addresses.
+| ... | *[Ref] Applicable standard specifications:*
+
+*** Variables ***
+| ${bd_id1}= | 1
+| ${bd_id2}= | 2
+| ${shg1}= | 3
+| ${shg2}= | 4
+| ${sock1}= | /tmp/sock1
+| ${sock2}= | /tmp/sock2
+
+*** Test Cases ***
+| TC01: DUT reports active interfaces
+| | [Documentation]
+| | ... | [Top] TG=DUT1; TG-DUT1-DUT2-TG. [Enc] None. [Cfg] Discovered \
+| | ... | active interfaces. [Ver] Report active interfaces on DUT. [Ref]
+| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO | 3_NODE_SINGLE_LINK_TOPO
+| | VPP reports interfaces on | ${nodes['DUT1']}
+
+| TC02: DUT with L2BD (MAC learning) switch ICMPv4 between two TG links
+| | [Documentation]
+| | ... | [Top] TG=DUT1. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT1 configure \
+| | ... | two i/fs into L2BD with MAC learning. [Ver] Make TG verify
+| | ... | ICMPv4 Echo Req pkts are switched thru DUT1 in both directions
+| | ... | and are correct on receive. [Ref]
+| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO
+| | Given Path for 2-node testing is set
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
+| | And Interfaces in 2-node path are up
+| | When Bridge domain on DUT node is created | ${dut_node} | ${bd_id1}
+| | And Interface is added to bridge domain | ${dut_node} | ${dut_to_tg_if1}
+| | ... | ${bd_id1}
+| | And Interface is added to bridge domain | ${dut_node} | ${dut_to_tg_if2}
+| | ... | ${bd_id1}
+| | Then Send and receive ICMPv4 bidirectionally | ${tg_node} | ${tg_to_dut_if1}
+| | ... | ${tg_to_dut_if2}
+
+| TC03: DUT1 and DUT2 with L2BD (MAC learning) switch between two TG links
+| | [Documentation]
+| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT1 and DUT2 \
+| | ... | configure two i/fs into L2BD with MAC learning. [Ver] Make TG
+| | ... | verify ICMPv4 Echo Req pkts are switched thru DUT1 and DUT2 in
+| | ... | both directions and are correct on receive. [Ref]
+| | [Tags] | 3_NODE_SINGLE_LINK_TOPO
+| | Given Path for 3-node testing is set
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Interfaces in 3-node path are up
+| | When Bridge domain on DUT node is created | ${dut1_node} | ${bd_id1}
+| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_tg}
+| | ... | ${bd_id1}
+| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_dut2}
+| | ... | ${bd_id1}
+| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id2}
+| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg}
+| | ... | ${bd_id2}
+| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_dut1}
+| | ... | ${bd_id2}
+| | Then Send and receive ICMPv4 bidirectionally | ${tg_node} | ${tg_to_dut1}
+| | ... | ${tg_to_dut2}
+
+| TC04: DUT1 and DUT2 with L2BD (static MACs) switch between two TG links
+| | [Documentation]
+| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT1 and \
+| | ... | DUT2 configure two i/fs into L2BD with static MACs. [Ver] Make
+| | ... | TG verify ICMPv4 Echo Req pkts are switched thru DUT1 and DUT2
+| | ... | in both directions and are correct on receive. [Ref]
+| | [Tags] | 3_NODE_SINGLE_LINK_TOPO
+| | Given Path for 3-node testing is set
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Interfaces in 3-node path are up
+| | When Bridge domain on DUT node is created | ${dut1_node} | ${bd_id1}
+| | ... | learn=${FALSE}
+| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_tg}
+| | ... | ${bd_id1}
+| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_dut2}
+| | ... | ${bd_id1}
+| | And Destination port is added to L2FIB on DUT node | ${tg_node}
+| | ... | ${tg_to_dut1}
+| | ... | ${dut1_node}
+| | ... | ${dut1_to_tg}
+| | ... | ${bd_id1}
+| | And Destination port is added to L2FIB on DUT node | ${tg_node}
+| | ... | ${tg_to_dut2}
+| | ... | ${dut1_node}
+| | ... | ${dut1_to_dut2}
+| | ... | ${bd_id1}
+| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id2}
+| | ... | learn=${FALSE}
+| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg}
+| | ... | ${bd_id2}
+| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_dut1}
+| | ... | ${bd_id2}
+| | And Destination port is added to L2FIB on DUT node | ${tg_node}
+| | ... | ${tg_to_dut1}
+| | ... | ${dut2_node}
+| | ... | ${dut2_to_dut1}
+| | ... | ${bd_id2}
+| | And Destination port is added to L2FIB on DUT node | ${tg_node}
+| | ... | ${tg_to_dut2}
+| | ... | ${dut2_node}
+| | ... | ${dut2_to_tg}
+| | ... | ${bd_id2}
+| | Then Send and receive ICMPv4 bidirectionally | ${tg_node} | ${tg_to_dut1}
+| | ... | ${tg_to_dut2}
+
+| TC05: DUT1 and DUT2 with L2BD (MAC learn) and SHG switch between four TG links
+| | [Documentation]
+| | ... | [Top] TG=DUT1=DUT2=TG. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT1 and \
+| | ... | DUT2 configure four i/fs into L2BD with MAC learning and the
+| | ... | same SHG on i/fs towards TG. [Ver] Make TG verify ICMPv4 Echo
+| | ... | Req pkts are switched thru DUT1 and DUT2 in both directions and
+| | ... | are correct on receive; verify no pkts are switched thru SHG
+| | ... | isolated interfaces. [Ref]
+| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO
+| | Given Path for 3-node BD-SHG testing is set | ${nodes['TG']}
+| | ... | ${nodes['DUT1']}
+| | ... | ${nodes['DUT2']}
+| | And Interfaces in 3-node BD-SHG testing are up
+| | When Bridge domain on DUT node is created | ${dut1_node} | ${bd_id1}
+| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_tg_if1}
+| | ... | ${bd_id1} | ${shg1}
+| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_tg_if2}
+| | ... | ${bd_id1} | ${shg1}
+| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_dut2}
+| | ... | ${bd_id1}
+| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id2}
+| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg_if1}
+| | ... | ${bd_id2} | ${shg2}
+| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg_if2}
+| | ... | ${bd_id2} | ${shg2}
+| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_dut1}
+| | ... | ${bd_id2}
+| | Then Send and receive ICMPv4 bidirectionally | ${tg_node}
+| | ... | ${tg_to_dut1_if1}
+| | ... | ${tg_to_dut2_if1}
+| | And Send and receive ICMPv4 bidirectionally | ${tg_node}
+| | ... | ${tg_to_dut1_if1}
+| | ... | ${tg_to_dut2_if2}
+| | And Send and receive ICMPv4 bidirectionally | ${tg_node}
+| | ... | ${tg_to_dut1_if2}
+| | ... | ${tg_to_dut2_if1}
+| | And Send and receive ICMPv4 bidirectionally | ${tg_node}
+| | ... | ${tg_to_dut1_if2}
+| | ... | ${tg_to_dut2_if2}
+| | And Run Keyword And Expect Error | ICMP echo Rx timeout
+| | ... | Send and receive ICMPv4 bidirectionally
+| | | ... | ${tg_node} | ${tg_to_dut1_if1}
+| | | ... | ${tg_to_dut1_if2}
+| | And Run Keyword And Expect Error | ICMP echo Rx timeout
+| | ... | Send and receive ICMPv4 bidirectionally
+| | | ... | ${tg_node} | ${tg_to_dut2_if1}
+| | | ... | ${tg_to_dut2_if2}
+
+| TC06: DUT with two L2BDs (MAC learn) switches ICMPv4 between TG and VM links
+| | [Documentation]
+| | ... | [Top] TG=DUT=VM. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT1 configure \
+| | ... | two L2BDs with MAC learning, each with vhost-user i/f to local
+| | ... | VM and i/f to TG; configure VM to loop pkts back betwen its two
+| | ... | virtio i/fs. [Ver] Make TG verify ICMPv4 Echo Req pkts are
+| | ... | switched thru DUT1 and VM in both directions and are correct on
+| | ... | receive. [Ref]
+| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO | VPP_VM_ENV
+| | Given Path for 2-node testing is set
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
+| | And Interfaces in 2-node path are up
+| | When VPP Vhost interfaces for L2BD forwarding are setup | ${dut_node}
+| | ... | ${sock1}
+| | ... | ${sock2}
+| | And Bridge domain on DUT node is created | ${dut_node} | ${bd_id1}
+| | And Interface is added to bridge domain | ${dut_node} | ${dut_to_tg_if1}
+| | ... | ${bd_id1}
+| | And Interface is added to bridge domain | ${dut_node} | ${vhost_if1}
+| | ... | ${bd_id1}
+| | And Bridge domain on DUT node is created | ${dut_node} | ${bd_id2}
+| | And Interface is added to bridge domain | ${dut_node} | ${dut_to_tg_if2}
+| | ... | ${bd_id2}
+| | And Interface is added to bridge domain | ${dut_node} | ${vhost_if2}
+| | ... | ${bd_id2}
+| | And VM for Vhost L2BD forwarding is setup | ${dut_node} | ${sock1}
+| | ... | ${sock2}
+| | Then Send and receive ICMPv4 bidirectionally | ${tg_node} | ${tg_to_dut_if1}
+| | ... | ${tg_to_dut_if2}
+| | [Teardown] | Run Keywords | Show Packet Trace on All DUTs | ${nodes}
+| | ... | AND | Show vpp trace dump on all DUTs
+| | ... | AND | Stop and Clear QEMU | ${dut_node} | ${vm_node}
+
+| TC07: DUT with two L2BDs (MAC learn) switches ICMPv6 between TG and VM links
+| | [Documentation]
+| | ... | [Top] TG=DUT=VM. [Enc] Eth-IPv6-ICMPv6. [Cfg] On DUT1 configure \
+| | ... | two L2BDs with MAC learning, each with vhost-user i/f to local
+| | ... | VM and i/f to TG; configure VM to loop pkts back betwen its two
+| | ... | virtio i/fs. [Ver] Make TG verify ICMPv6 Echo Req pkts are
+| | ... | switched thru DUT1 and VM in both directions and are correct on
+| | ... | receive. [Ref]
+| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO | VPP_VM_ENV
+| | Given Path for 2-node testing is set
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
+| | And Interfaces in 2-node path are up
+| | When VPP Vhost interfaces for L2BD forwarding are setup | ${dut_node}
+| | ... | ${sock1}
+| | ... | ${sock2}
+| | And Bridge domain on DUT node is created | ${dut_node} | ${bd_id1}
+| | And Interface is added to bridge domain | ${dut_node} | ${dut_to_tg_if1}
+| | ... | ${bd_id1}
+| | And Interface is added to bridge domain | ${dut_node} | ${vhost_if1}
+| | ... | ${bd_id1}
+| | And Bridge domain on DUT node is created | ${dut_node} | ${bd_id2}
+| | And Interface is added to bridge domain | ${dut_node} | ${dut_to_tg_if2}
+| | ... | ${bd_id2}
+| | And Interface is added to bridge domain | ${dut_node} | ${vhost_if2}
+| | ... | ${bd_id2}
+| | And VM for Vhost L2BD forwarding is setup | ${dut_node} | ${sock1}
+| | ... | ${sock2}
+| | Then Send and receive ICMPv6 bidirectionally | ${tg_node} | ${tg_to_dut_if1}
+| | ... | ${tg_to_dut_if2}
+| | [Teardown] | Run Keywords | Show Packet Trace on All DUTs | ${nodes}
+| | ... | AND | Show vpp trace dump on all DUTs
+| | ... | AND | Stop and Clear QEMU | ${dut_node} | ${vm_node}
+
+| TC08: DUT with two L2BDs (static MACs) switches ICMPv4 between TG and VM links
+| | [Documentation]
+| | ... | [Top] TG=DUT=VM. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT1 configure \
+| | ... | two L2BDs with static MACs, each with vhost-user i/f to local VM
+| | ... | and i/f to TG; configure VM to loop pkts back betwen its two
+| | ... | virtio i/fs. [Ver] Make TG verify ICMPv4 Echo Req pkts are
+| | ... | switched thru DUT1 and VM in both directions and are correct on
+| | ... | receive. [Ref]
+| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO | VPP_VM_ENV
+| | Given Path for 2-node testing is set
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
+| | And Interfaces in 2-node path are up
+| | When VPP Vhost interfaces for L2BD forwarding are setup | ${dut_node}
+| | ... | ${sock1}
+| | ... | ${sock2}
+| | And Bridge domain on DUT node is created | ${dut_node} | ${bd_id1}
+| | ... | learn=${FALSE}
+| | And Interface is added to bridge domain | ${dut_node} | ${dut_to_tg_if1}
+| | ... | ${bd_id1}
+| | And Interface is added to bridge domain | ${dut_node} | ${vhost_if1}
+| | ... | ${bd_id1}
+| | And Destination port is added to L2FIB on DUT node | ${tg_node}
+| | ... | ${tg_to_dut_if1}
+| | ... | ${dut_node}
+| | ... | ${dut_to_tg_if1}
+| | ... | ${bd_id1}
+| | And Destination port is added to L2FIB on DUT node | ${tg_node}
+| | ... | ${tg_to_dut_if2}
+| | ... | ${dut_node}
+| | ... | ${vhost_if1}
+| | ... | ${bd_id1}
+| | And Bridge domain on DUT node is created | ${dut_node} | ${bd_id2}
+| | ... | learn=${FALSE}
+| | And Interface is added to bridge domain | ${dut_node} | ${dut_to_tg_if2}
+| | ... | ${bd_id2}
+| | And Interface is added to bridge domain | ${dut_node} | ${vhost_if2}
+| | ... | ${bd_id2}
+| | And Destination port is added to L2FIB on DUT node | ${tg_node}
+| | ... | ${tg_to_dut_if2}
+| | ... | ${dut_node}
+| | ... | ${dut_to_tg_if2}
+| | ... | ${bd_id2}
+| | And Destination port is added to L2FIB on DUT node | ${tg_node}
+| | ... | ${tg_to_dut_if1}
+| | ... | ${dut_node}
+| | ... | ${vhost_if2}
+| | ... | ${bd_id2}
+| | And VM for Vhost L2BD forwarding is setup | ${dut_node} | ${sock1}
+| | ... | ${sock2}
+| | Then Send and receive ICMPv4 bidirectionally | ${tg_node} | ${tg_to_dut_if1}
+| | ... | ${tg_to_dut_if2}
+| | [Teardown] | Run Keywords | Show Packet Trace on All DUTs | ${nodes}
+| | ... | AND | Show vpp trace dump on all DUTs
+| | ... | AND | Stop and Clear QEMU | ${dut_node} | ${vm_node}
+
+| TC09: DUT with two L2BDs (static MACs) switches ICMPv6 between TG and VM links
+| | [Documentation]
+| | ... | [Top] TG=DUT=VM. [Enc] Eth-IPv6-ICMPv6. [Cfg] On DUT1 configure \
+| | ... | two L2BDs with static MACs, each with vhost-user i/f to local VM
+| | ... | and i/f to TG; configure VM to loop pkts back betwen its two
+| | ... | virtio i/fs. [Ver] Make TG verify ICMPv6 Echo Req pkts are
+| | ... | switched thru DUT1 and VM in both directions and are correct on
+| | ... | receive. [Ref]
+| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO | VPP_VM_ENV
+| | Given Path for 2-node testing is set
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
+| | And Interfaces in 2-node path are up
+| | When VPP Vhost interfaces for L2BD forwarding are setup | ${dut_node}
+| | ... | ${sock1}
+| | ... | ${sock2}
+| | And Bridge domain on DUT node is created | ${dut_node} | ${bd_id1}
+| | ... | learn=${FALSE}
+| | And Interface is added to bridge domain | ${dut_node} | ${dut_to_tg_if1}
+| | ... | ${bd_id1}
+| | And Interface is added to bridge domain | ${dut_node} | ${vhost_if1}
+| | ... | ${bd_id1}
+| | And Destination port is added to L2FIB on DUT node | ${tg_node}
+| | ... | ${tg_to_dut_if1}
+| | ... | ${dut_node}
+| | ... | ${dut_to_tg_if1}
+| | ... | ${bd_id1}
+| | And Destination port is added to L2FIB on DUT node | ${tg_node}
+| | ... | ${tg_to_dut_if2}
+| | ... | ${dut_node}
+| | ... | ${vhost_if1}
+| | ... | ${bd_id1}
+| | And Bridge domain on DUT node is created | ${dut_node} | ${bd_id2}
+| | ... | learn=${FALSE}
+| | And Interface is added to bridge domain | ${dut_node} | ${dut_to_tg_if2}
+| | ... | ${bd_id2}
+| | And Interface is added to bridge domain | ${dut_node} | ${vhost_if2}
+| | ... | ${bd_id2}
+| | And Destination port is added to L2FIB on DUT node | ${tg_node}
+| | ... | ${tg_to_dut_if2}
+| | ... | ${dut_node}
+| | ... | ${dut_to_tg_if2}
+| | ... | ${bd_id2}
+| | And Destination port is added to L2FIB on DUT node | ${tg_node}
+| | ... | ${tg_to_dut_if1}
+| | ... | ${dut_node}
+| | ... | ${vhost_if2}
+| | ... | ${bd_id2}
+| | And VM for Vhost L2BD forwarding is setup | ${dut_node} | ${sock1}
+| | ... | ${sock2}
+| | Then Send and receive ICMPv6 bidirectionally | ${tg_node} | ${tg_to_dut_if1}
+| | ... | ${tg_to_dut_if2}
+| | [Teardown] | Run Keywords | Show Packet Trace on All DUTs | ${nodes}
+| | ... | AND | Show vpp trace dump on all DUTs
+| | ... | AND | Stop and Clear QEMU | ${dut_node} | ${vm_node}