diff options
Diffstat (limited to 'tests/func/cop_base')
4 files changed, 386 insertions, 0 deletions
diff --git a/tests/func/cop_base/eth2p-ethip4-ip4base-copblklistbase-func.robot b/tests/func/cop_base/eth2p-ethip4-ip4base-copblklistbase-func.robot new file mode 100644 index 0000000000..37e55c0666 --- /dev/null +++ b/tests/func/cop_base/eth2p-ethip4-ip4base-copblklistbase-func.robot @@ -0,0 +1,92 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Library | resources.libraries.python.Trace +| Library | resources.libraries.python.Cop +| Resource | resources/libraries/robot/default.robot +| Resource | resources/libraries/robot/interfaces.robot +| Resource | resources/libraries/robot/ipv4.robot +| Resource | resources/libraries/robot/traffic.robot +| Resource | resources/libraries/robot/testing_path.robot +| Resource | resources/libraries/robot/l2_xconnect.robot +| Variables | resources/libraries/python/IPv4NodeAddress.py | ${nodes} +| Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO +| Test Setup | Func Test Setup +| Test Teardown | Func Test Teardown +| Documentation | *COP Security IPv4 Blacklist Tests* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 on all links. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and +| ... | static routes. COP security black-lists are applied on DUT1 ingress +| ... | interface from TG. DUT2 is configured with L2XC. +| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are sent in +| ... | one direction by TG on link to DUT1; on receive TG verifies packets for +| ... | correctness and drops as applicable. +| ... | *[Ref] Applicable standard specifications:* + +*** Variables *** +| ${tg_node}= | ${nodes['TG']} +| ${dut1_node}= | ${nodes['DUT1']} +| ${dut2_node}= | ${nodes['DUT2']} + +| ${dut1_if1_ip}= | 192.168.1.1 +| ${dut1_if2_ip}= | 192.168.2.1 +| ${dut1_if1_ip_GW}= | 192.168.1.2 +| ${dut1_if2_ip_GW}= | 192.168.2.2 + +| ${test_dst_ip}= | 32.0.0.1 +| ${test_src_ip}= | 16.0.0.1 + +| ${cop_dut_ip}= | 16.0.0.0 + +| ${ip_prefix}= | 24 +| ${nodes_ipv4_addresses}= | ${nodes_ipv4_addr} + +| ${fib_table_number}= | 1 + +*** Test Cases *** +| TC01: DUT drops IPv4 pkts with COP blacklist set with IPv4 src-addr +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT1 \ +| | ... | configure interface IPv4 addresses and routes in the main +| | ... | routing domain, add COP blacklist on interface to TG with IPv4 +| | ... | src-addr matching packets generated by TG; on DUT2 configure L2 +| | ... | xconnect. [Ver] Make TG send ICMPv4 Echo Req on its interface to +| | ... | DUT1; verify no ICMPv4 Echo Req pkts are received. [Ref] +| | Given Path for 3-node testing is set +| | ... | ${tg_node} | ${dut1_node} | ${dut2_node} | ${tg_node} +| | And Interfaces in 3-node path are up +| | And L2 setup xconnect on DUT +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg} +| | And Set Interface Address +| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_if1_ip} | ${ip_prefix} +| | And Set Interface Address +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_if2_ip} | ${ip_prefix} +| | And Add Arp On Dut +| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_if1_ip_GW} | ${tg_to_dut1_mac} +| | And Add Arp On Dut +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_if2_ip_GW} | ${tg_to_dut2_mac} +| | And Vpp Route Add | ${dut1_node} +| | ... | ${test_dst_ip} | ${ip_prefix} | ${dut1_if2_ip_GW} | ${dut1_to_dut2} +| | And Add fib table | ${dut1_node} +| | ... | ${cop_dut_ip} | ${ip_prefix} | ${fib_table_number} | drop +| | When COP Add whitelist Entry +| | ... | ${dut1_node} | ${dut1_to_tg} | ip4 | ${fib_table_number} +| | And COP interface enable or disable | ${dut1_node} | ${dut1_to_tg} | enable +| | Then Send packet from Port to Port should failed | ${tg_node} +| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac} +| | ... | ${dut1_to_tg_mac} | ${tg_to_dut2} | ${dut1_to_dut2_mac} +| | ... | ${tg_to_dut2_mac} diff --git a/tests/func/cop_base/eth2p-ethip4-ip4base-copwhlistbase-func.robot b/tests/func/cop_base/eth2p-ethip4-ip4base-copwhlistbase-func.robot new file mode 100644 index 0000000000..eb8be688d9 --- /dev/null +++ b/tests/func/cop_base/eth2p-ethip4-ip4base-copwhlistbase-func.robot @@ -0,0 +1,92 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Library | resources.libraries.python.Trace +| Library | resources.libraries.python.Cop +| Resource | resources/libraries/robot/default.robot +| Resource | resources/libraries/robot/interfaces.robot +| Resource | resources/libraries/robot/ipv4.robot +| Resource | resources/libraries/robot/traffic.robot +| Resource | resources/libraries/robot/testing_path.robot +| Resource | resources/libraries/robot/l2_xconnect.robot +| Variables | resources/libraries/python/IPv4NodeAddress.py | ${nodes} +| Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO +| Test Setup | Func Test Setup +| Test Teardown | Func Test Teardown +| Documentation | *COP Security IPv4 Whitelist Tests* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 on all links. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and +| ... | static routes. COP security white-lists are applied on DUT1 ingress +| ... | interface from TG. DUT2 is configured with L2XC. +| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are sent in +| ... | one direction by TG on link to DUT1; on receive TG verifies packets for +| ... | correctness and drops as applicable. +| ... | *[Ref] Applicable standard specifications:* + +*** Variables *** +| ${tg_node}= | ${nodes['TG']} +| ${dut1_node}= | ${nodes['DUT1']} +| ${dut2_node}= | ${nodes['DUT2']} + +| ${dut1_if1_ip}= | 192.168.1.1 +| ${dut1_if2_ip}= | 192.168.2.1 +| ${dut1_if1_ip_GW}= | 192.168.1.2 +| ${dut1_if2_ip_GW}= | 192.168.2.2 + +| ${test_dst_ip}= | 32.0.0.1 +| ${test_src_ip}= | 16.0.0.1 + +| ${cop_dut_ip}= | 16.0.0.0 + +| ${ip_prefix}= | 24 +| ${nodes_ipv4_addresses}= | ${nodes_ipv4_addr} + +| ${fib_table_number}= | 1 + +*** Test Cases *** +| TC01: DUT permits IPv4 pkts with COP whitelist set with IPv4 src-addr +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT1 \ +| | ... | configure interface IPv4 addresses and routes in the main +| | ... | routing domain, add COP whitelist on interface to TG with IPv4 +| | ... | src-addr matching packets generated by TG; on DUT2 configure L2 +| | ... | xconnect. [Ver] Make TG send ICMPv4 Echo Req on its interface to +| | ... | DUT1; verify received ICMPv4 Echo Req pkts are correct. [Ref] +| | Given Path for 3-node testing is set +| | ... | ${tg_node} | ${dut1_node} | ${dut2_node} | ${tg_node} +| | And Interfaces in 3-node path are up +| | And L2 setup xconnect on DUT +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg} +| | And Set Interface Address +| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_if1_ip} | ${ip_prefix} +| | And Set Interface Address +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_if2_ip} | ${ip_prefix} +| | And Add Arp On Dut +| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_if1_ip_GW} | ${tg_to_dut1_mac} +| | And Add Arp On Dut +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_if2_ip_GW} | ${tg_to_dut2_mac} +| | And Vpp Route Add | ${dut1_node} +| | ... | ${test_dst_ip} | ${ip_prefix} | ${dut1_if2_ip_GW} | ${dut1_to_dut2} +| | And Add fib table | ${dut1_node} +| | ... | ${cop_dut_ip} | ${ip_prefix} | ${fib_table_number} | local +| | When COP Add whitelist Entry +| | ... | ${dut1_node} | ${dut1_to_tg} | ip4 | ${fib_table_number} +| | And COP interface enable or disable | ${dut1_node} | ${dut1_to_tg} | enable +| | Then Send Packet And Check Headers | ${tg_node} +| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac} +| | ... | ${dut1_to_tg_mac} | ${tg_to_dut2} | ${dut1_to_dut2_mac} +| | ... | ${tg_to_dut2_mac} diff --git a/tests/func/cop_base/eth2p-ethip6-ip6base-copblklistbase-func.robot b/tests/func/cop_base/eth2p-ethip6-ip6base-copblklistbase-func.robot new file mode 100644 index 0000000000..7511dfe31b --- /dev/null +++ b/tests/func/cop_base/eth2p-ethip6-ip6base-copblklistbase-func.robot @@ -0,0 +1,101 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Library | resources.libraries.python.Trace +| Library | resources.libraries.python.Cop +| Resource | resources/libraries/robot/default.robot +| Resource | resources/libraries/robot/interfaces.robot +| Resource | resources/libraries/robot/ipv6.robot +| Resource | resources/libraries/robot/traffic.robot +| Resource | resources/libraries/robot/testing_path.robot +| Resource | resources/libraries/robot/l2_xconnect.robot +| Variables | resources/libraries/python/IPv6NodesAddr.py | ${nodes} +| Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO +| Test Setup | Func Test Setup +| Test Teardown | Func Test Teardown +| Documentation | *COP Security IPv6 Blacklist Tests* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-ICMPv6 on all links. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6 routing and +| ... | static routes. COP security black-lists are applied on DUT1 ingress +| ... | interface from TG. DUT2 is configured with L2XC. +| ... | *[Ver] TG verification:* Test ICMPv6 Echo Request packets are sent in +| ... | one direction by TG on link to DUT1; on receive TG verifies packets for +| ... | correctness and drops as applicable. +| ... | *[Ref] Applicable standard specifications:* + +*** Variables *** +| ${tg_node}= | ${nodes['TG']} +| ${dut1_node}= | ${nodes['DUT1']} +| ${dut2_node}= | ${nodes['DUT2']} + +| ${dut1_if1_ip}= | 3ffe:62::1 +| ${dut1_if2_ip}= | 3ffe:63::1 +| ${dut1_if1_ip_GW}= | 3ffe:62::2 +| ${dut1_if2_ip_GW}= | 3ffe:63::2 + +| ${dut2_if1_ip}= | 3ffe:72::1 +| ${dut2_if2_ip}= | 3ffe:73::1 + +| ${test_dst_ip}= | 3ffe:64::1 +| ${test_src_ip}= | 3ffe:61::1 + +| ${cop_dut_ip}= | 3ffe:61:: + +| ${ip_prefix}= | 64 + +| ${nodes_ipv6_addresses}= | ${nodes_ipv6_addr} + +| ${fib_table_number}= | 1 + +*** Test Cases *** +| TC01: DUT drops IPv6 pkts with COP blacklist set with IPv6 src-addr +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv6-ICMPv6. [Cfg] On DUT1 \ +| | ... | configure interface IPv6 addresses and routes in the main +| | ... | routing domain, add COP blacklist on interface to TG with IPv6 +| | ... | src-addr matching packets generated by TG; on DUT2 configure L2 +| | ... | xconnect. [Ver] Make TG send ICMPv6 Echo Req on its interface to +| | ... | DUT1; verify no ICMPv6 Echo Req pkts are received. [Ref] +| | Given Path for 3-node testing is set +| | ... | ${tg_node} | ${dut1_node} | ${dut2_node} | ${tg_node} +| | And Interfaces in 3-node path are up +| | And L2 setup xconnect on DUT +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg} +| | And VPP Set IF IPv6 Addr +| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_if1_ip} | ${ip_prefix} +| | And VPP Set IF IPv6 Addr +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_if2_ip} | ${ip_prefix} +| | And VPP Set IF IPv6 Addr +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_if1_ip} | ${ip_prefix} +| | And VPP Set IF IPv6 Addr +| | ... | ${dut2_node} | ${dut2_to_tg} | ${dut2_if2_ip} | ${ip_prefix} +| | And Add IP Neighbor +| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_if1_ip_GW} | ${tg_to_dut1_mac} +| | And Add IP Neighbor +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_if2_ip_GW} | ${tg_to_dut2_mac} +| | And Vpp Route Add | ${dut1_node} +| | ... | ${test_dst_ip} | ${ip_prefix} | ${dut1_if2_ip_GW} | ${dut1_to_dut2} +| | And Vpp All Ra Suppress Link Layer | ${nodes} +| | And Add fib table | ${dut1_node} +| | ... | ${cop_dut_ip} | ${ip_prefix} | ${fib_table_number} | drop +| | When COP Add whitelist Entry +| | ... | ${dut1_node} | ${dut1_to_tg} | ip6 | ${fib_table_number} +| | And COP interface enable or disable | ${dut1_node} | ${dut1_to_tg} | enable +| | Then Send packet from Port to Port should failed | ${tg_node} +| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac} +| | ... | ${dut1_to_tg_mac} | ${tg_to_dut2} | ${dut1_to_dut2_mac} +| | ... | ${tg_to_dut2_mac} diff --git a/tests/func/cop_base/eth2p-ethip6-ip6base-copwhlistbase-func.robot b/tests/func/cop_base/eth2p-ethip6-ip6base-copwhlistbase-func.robot new file mode 100644 index 0000000000..f75f4d0dea --- /dev/null +++ b/tests/func/cop_base/eth2p-ethip6-ip6base-copwhlistbase-func.robot @@ -0,0 +1,101 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Library | resources.libraries.python.Trace +| Library | resources.libraries.python.Cop +| Resource | resources/libraries/robot/default.robot +| Resource | resources/libraries/robot/interfaces.robot +| Resource | resources/libraries/robot/ipv6.robot +| Resource | resources/libraries/robot/traffic.robot +| Resource | resources/libraries/robot/testing_path.robot +| Resource | resources/libraries/robot/l2_xconnect.robot +| Variables | resources/libraries/python/IPv6NodesAddr.py | ${nodes} +| Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO +| Test Setup | Func Test Setup +| Test Teardown | Func Test Teardown +| Documentation | *COP Security IPv6 Whitelist Tests* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-ICMPv6 on all links. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6 routing and +| ... | static routes. COP security white-lists are applied on DUT1 ingress +| ... | interface from TG. DUT2 is configured with L2XC. +| ... | *[Ver] TG verification:* Test ICMPv6 Echo Request packets are sent in +| ... | one direction by TG on link to DUT1; on receive TG verifies packets for +| ... | correctness and drops as applicable. +| ... | *[Ref] Applicable standard specifications:* + +*** Variables *** +| ${tg_node}= | ${nodes['TG']} +| ${dut1_node}= | ${nodes['DUT1']} +| ${dut2_node}= | ${nodes['DUT2']} + +| ${dut1_if1_ip}= | 3ffe:62::1 +| ${dut1_if2_ip}= | 3ffe:63::1 +| ${dut1_if1_ip_GW}= | 3ffe:62::2 +| ${dut1_if2_ip_GW}= | 3ffe:63::2 + +| ${dut2_if1_ip}= | 3ffe:72::1 +| ${dut2_if2_ip}= | 3ffe:73::1 + +| ${test_dst_ip}= | 3ffe:64::1 +| ${test_src_ip}= | 3ffe:61::1 + +| ${cop_dut_ip}= | 3ffe:61:: + +| ${ip_prefix}= | 64 + +| ${nodes_ipv6_addresses}= | ${nodes_ipv6_addr} + +| ${fib_table_number}= | 1 + +*** Test Cases *** +| TC01: DUT permits IPv6 pkts with COP whitelist set with IPv6 src-addr +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv6-ICMPv6. [Cfg] On DUT1 \ +| | ... | configure interface IPv6 addresses and routes in the main +| | ... | routing domain, add COP whitelist on interface to TG with IPv6 +| | ... | src-addr matching packets generated by TG; on DUT2 configure L2 +| | ... | xconnect. [Ver] Make TG send ICMPv6 Echo Req on its interface to +| | ... | DUT1; verify received ICMPv6 Echo Req pkts are correct. [Ref] +| | Given Path for 3-node testing is set +| | ... | ${tg_node} | ${dut1_node} | ${dut2_node} | ${tg_node} +| | And Interfaces in 3-node path are up +| | And L2 setup xconnect on DUT +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg} +| | And VPP Set IF IPv6 Addr +| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_if1_ip} | ${ip_prefix} +| | And VPP Set IF IPv6 Addr +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_if2_ip} | ${ip_prefix} +| | And VPP Set IF IPv6 Addr +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_if1_ip} | ${ip_prefix} +| | And VPP Set IF IPv6 Addr +| | ... | ${dut2_node} | ${dut2_to_tg} | ${dut2_if2_ip} | ${ip_prefix} +| | And Add IP Neighbor +| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_if1_ip_GW} | ${tg_to_dut1_mac} +| | And Add IP Neighbor +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_if2_ip_GW} | ${tg_to_dut2_mac} +| | And Vpp Route Add | ${dut1_node} +| | ... | ${test_dst_ip} | ${ip_prefix} | ${dut1_if2_ip_GW} | ${dut1_to_dut2} +| | And Vpp All Ra Suppress Link Layer | ${nodes} +| | And Add fib table | ${dut1_node} | ${cop_dut_ip} | ${ip_prefix} | +| | ... | ${fib_table_number} | local +| | When COP Add whitelist Entry | ${dut1_node} | ${dut1_to_tg} | ip6 | +| | ... | ${fib_table_number} +| | And COP interface enable or disable | ${dut1_node} | ${dut1_to_tg} | enable +| | Then Send Packet And Check Headers | ${tg_node} +| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac} +| | ... | ${dut1_to_tg_mac} | ${tg_to_dut2} | ${dut1_to_dut2_mac} +| | ... | ${tg_to_dut2_mac} |