diff options
Diffstat (limited to 'tests/func/honeycomb/mgmt-cfg-ietfacl-apihc-apivat-func.robot')
| -rw-r--r-- | tests/func/honeycomb/mgmt-cfg-ietfacl-apihc-apivat-func.robot | 375 |
1 files changed, 0 insertions, 375 deletions
diff --git a/tests/func/honeycomb/mgmt-cfg-ietfacl-apihc-apivat-func.robot b/tests/func/honeycomb/mgmt-cfg-ietfacl-apihc-apivat-func.robot deleted file mode 100644 index 4d4785a6df..0000000000 --- a/tests/func/honeycomb/mgmt-cfg-ietfacl-apihc-apivat-func.robot +++ /dev/null @@ -1,375 +0,0 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Variables *** -| &{if_settings}= | enabled=True -# Bridge domain settings -| ${bd_name}= | bd1 -| &{bd_settings}= | flood=${True} | forward=${True} | learn=${True} -| ... | unknown-unicast-flood=${True} | arp-termination=${False} -| &{bd_if_settings}= | split_horizon_group=${0} | bvi=${False} -# Names for AC lists -| ${acl_name_l2}= | acl_l2 -| ${acl_name_l3_ip4}= | acl_l3_ip4 -| ${acl_name_l3_ip6}= | acl_l3_ip6 -| ${acl_name_l4}= | acl_l4 -| ${acl_name_mixed}= | acl_mixed -| ${acl_name_multirule}= | acl_multirule - -*** Settings *** -| Resource | resources/libraries/robot/default.robot -| Resource | resources/libraries/robot/honeycomb/honeycomb.robot -| Resource | resources/libraries/robot/honeycomb/interfaces.robot -| Resource | resources/libraries/robot/honeycomb/bridge_domain.robot -| Resource | resources/libraries/robot/honeycomb/access_control_lists.robot -| Resource | resources/libraries/robot/testing_path.robot -| Resource | resources/libraries/robot/traffic.robot -| Library | resources.libraries.python.honeycomb.HcAPIKwACL.ACLKeywords -| Library | resources.libraries.python.Trace -| Library | resources.libraries.python.IPv4Setup -| Library | resources.libraries.python.IPv4Util -| Library | resources.libraries.python.IPv6Util -| Library | resources.libraries.python.Routing -| Test Teardown | Run Keywords | Clear IETF-ACL settings -| ... | ${node} | ${dut_to_tg_if1} | AND -| ... | Show Packet Trace on All DUTs | ${nodes} -| Suite Teardown | Run Keyword If Any Tests Failed -| ... | Restart Honeycomb And VPP And Clear Persisted Configuration | ${node} -| Documentation | *Honeycomb access control lists test suite for IETF-ACL node.* -# Test suite out of date since https://gerrit.fd.io/r/#/c/4331/ -# Ietf-ACL fucntionality will be removed -# | Force Tags | Honeycomb_sanity - -*** Test Cases *** -| TC01: L2 ACL MAC filtering through IETF-ACL node -| | [Documentation] -| | ... | [Top] TG=DUT1=TG. -| | ... | [Enc] Eth-IPv4-TCP. -| | ... | [Cfg] (Using Honeycomb API) On DUT1 bridge both interfaces to TG\ -| | ... | and configure L2 MAC ACL on ingress interface. -| | ... | [Ver] Send simple TCP packets from one TG interface to the other,\ -| | ... | using different MACs. Receive all packets except those with\ -| | ... | MACs in the filtered ranges. -| | [Teardown] | Run Keywords -| | ... | Clear IETF-ACL Settings | ${node} | ${dut_to_tg_if1} | AND -| | ... | Show Packet Trace On All DUTs | ${nodes} | AND -| | ... | Honeycomb Removes All Bridge Domains -| | ... | ${node} | ${dut_to_tg_if1} | ${dut_to_tg_if2} -| | Given Setup Interfaces And Bridge Domain For IETF-ACL Test -| | ... | L2 | ${acl_name_l2} -| | When Honeycomb Creates ACL Chain Through IETF Node -| | ... | ${dut_node} | ${acl_name_l2} | L2 | ${acl_settings} -| | And Honeycomb Assigns IETF-ACL Chain To Interface -| | ... | ${dut_node} | ${dut_to_tg_if1} | L2 | ingress | ${acl_name_l2} -| | ... | permit -| | Then Send TCP Or UDP Packet | ${tg_node} | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${src_mac} -| | ... | ${tg_to_dut_if2} | ${dst_mac} -| | ... | TCP | ${src_port} | ${dst_port} -| | And Run Keyword And Expect Error | TCP/UDP Rx timeout -| | ... | Send TCP Or UDP Packet | ${tg_node} | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${classify_src} -| | ... | ${tg_to_dut_if2} | ${classify_dst} -| | ... | TCP | ${src_port} | ${dst_port} -| | And Run Keyword And Expect Error | TCP/UDP Rx timeout -| | ... | Send TCP Or UDP Packet | ${tg_node} | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${classify_src2} -| | ... | ${tg_to_dut_if2} | ${classify_dst2} -| | ... | TCP | ${src_port} | ${dst_port} - -| TC02: L2 ACL MAC filtering through IETF-ACL node on egress interface -| | [Documentation] -| | ... | [Top] TG=DUT1=TG. -| | ... | [Enc] Eth-IPv4-TCP. -| | ... | [Cfg] (Using Honeycomb API) On DUT1 bridge both interfaces to TG\ -| | ... | and configure L2 MAC ACL on egress interface. -| | ... | [Ver] Send simple TCP packets from one TG interface to the other,\ -| | ... | using different MACs. Receive all packets except those with\ -| | ... | MACs in the filtered ranges. -| | [Teardown] | Run Keywords -| | ... | Clear IETF-ACL Settings | ${node} | ${dut_to_tg_if2} | AND -| | ... | Show Packet Trace On All DUTs | ${nodes} | AND -| | ... | Honeycomb Removes All Bridge Domains -| | ... | ${node} | ${dut_to_tg_if1} | ${dut_to_tg_if2} -| | Given Setup Interfaces And Bridge Domain For IETF-ACL Test -| | ... | L2 | ${acl_name_l2} -| | When Honeycomb Creates ACL Chain Through IETF Node -| | ... | ${dut_node} | ${acl_name_l2} | L2 | ${acl_settings} -| | And Honeycomb Assigns IETF-ACL Chain To Interface -| | ... | ${dut_node} | ${dut_to_tg_if2} | L2 | egress | ${acl_name_l2} -| | ... | permit -| | Then Send TCP Or UDP Packet | ${tg_node} | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${src_mac} -| | ... | ${tg_to_dut_if2} | ${dst_mac} -| | ... | TCP | ${src_port} | ${dst_port} -| | And Run Keyword And Expect Error | TCP/UDP Rx timeout -| | ... | Send TCP Or UDP Packet | ${tg_node} | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${classify_src} -| | ... | ${tg_to_dut_if2} | ${classify_dst} -| | ... | TCP | ${src_port} | ${dst_port} -| | And Run Keyword And Expect Error | TCP/UDP Rx timeout -| | ... | Send TCP Or UDP Packet | ${tg_node} | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${classify_src2} -| | ... | ${tg_to_dut_if2} | ${classify_dst2} -| | ... | TCP | ${src_port} | ${dst_port} - -| TC03: L3 ACL IPv4 filtering through IETF-ACL node -| | [Documentation] -| | ... | [Top] TG=DUT1=TG. -| | ... | [Enc] Eth-IPv4-TCP. -| | ... | [Cfg] (Using Honeycomb API) On DUT1 set IPv4 addresses on both\ -| | ... | interfaces to TG, add ARP entry and routes, and configure L3 IPv4 ACL\ -| | ... | on ingress interface with src/dst IP and protocol. -| | ... | [Ver] Send simple TCP and UDP packets from one TG interface\ -| | ... | to the other, using different IPv4 IPs. Receive all packets except\ -| | ... | those with IPs in the filtered ranges and UDP protocol payload. -| | Given Setup Interface IPs And Routes For IPv4 IETF-ACL Test -| | ... | L3_IP4 | ${acl_name_l3_ip4} -| | When Honeycomb Creates ACL Chain Through IETF Node -| | ... | ${dut_node} | ${acl_name_l3_ip4} | L3_IP4 | ${acl_settings} -| | And Honeycomb Assigns IETF-ACL Chain To Interface -| | ... | ${dut_node} | ${dut_to_tg_if1} | L3_IP4 | ingress | ${acl_name_l3_ip4} -| | ... | permit -| | Then Send TCP Or UDP Packet | ${tg_node} -| | ... | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | UDP | ${src_port} | ${dst_port} -| | And Send TCP Or UDP Packet | ${tg_node} -| | ... | ${classify_src} | ${classify_dst} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | TCP | ${src_port} | ${dst_port} -| | And Run Keyword And Expect Error | TCP/UDP Rx timeout -| | ... | Send TCP Or UDP Packet | ${tg_node} -| | ... | ${classify_src} | ${classify_dst} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | UDP | ${src_port} | ${dst_port} - -| TC04: L3 ACL IPv6 filtering through IETF-ACL node -| | [Documentation] -| | ... | [Top] TG=DUT1=TG. -| | ... | [Enc] Eth-IPv4-TCP. -| | ... | [Cfg] (Using Honeycomb API) On DUT1 set IPv6 addresses on both\ -| | ... | interfaces to TG, add IP neighbor entry and routes, and configure\ -| | ... | L3 IPv6 ACL on ingress interface with src/dst IP and next-header. -| | ... | [Ver] Send simple TCP and UDP packets from one TG interface\ -| | ... | to the other, using different IPv6 IPs. Receive all packets except\ -| | ... | those with IPs in the filtered ranges and UDP protocol payload. -| | Given Path for 2-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Import Variables | resources/test_data/honeycomb/ietf_acl.py -| | ... | L3_IP6 | ${acl_name_l3_ip6} -| | And Honeycomb sets interface state | ${dut_node} | ${dut_to_tg_if1} | up -| | And Honeycomb sets interface state | ${dut_node} | ${dut_to_tg_if2} | up -# TODO: Configure addresses through Honeycomb when implemented. (Honeycomb-102) -| | And Set Interface Address | ${dut_node} -| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip} | ${prefix_length} -| | And Set Interface Address | ${dut_node} -| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip} | ${prefix_length} -| | And VPP RA suppress link layer | ${dut_node} | ${dut_to_tg_if2} -# TODO: Configure route through Honeycomb when implemented.(Honeycomb-58) -| | And Add IP Neighbor -| | ... | ${node} | ${dut_to_tg_if2} | ${gateway} | ${tg_to_dut_if2_mac} -| | And VPP Route Add | ${node} | ${dst_net} | ${prefix_length} -| | ... | ${gateway} | interface=${dut_to_tg_if2} | use_sw_index=False -| | And VPP Route Add | ${node} | ${classify_dst_net} | ${prefix_length} -| | ... | ${gateway} | interface=${dut_to_tg_if2} | use_sw_index=False -| | When Honeycomb Creates ACL Chain Through IETF Node -| | ... | ${dut_node} | ${acl_name_l3_ip6} | L3_IP6 | ${acl_settings} -| | And Honeycomb Assigns IETF-ACL Chain To Interface -| | ... | ${dut_node} | ${dut_to_tg_if1} | L3_IP6 | ingress | ${acl_name_l3_ip6} -| | ... | permit -| | Then Send TCP Or UDP Packet | ${tg_node} -| | ... | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | UDP | ${src_port} | ${dst_port} -| | And Send TCP Or UDP Packet | ${tg_node} -| | ... | ${classify_src} | ${classify_dst} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | TCP | ${src_port} | ${dst_port} -| | And Run Keyword And Expect Error | TCP/UDP Rx timeout -| | ... | Send TCP Or UDP Packet | ${tg_node} -| | ... | ${classify_src} | ${classify_dst} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | UDP | ${src_port} | ${dst_port} - -| TC05: L4 ACL port filtering through IETF-ACL node -| | [Documentation] -| | ... | [Top] TG=DUT1=TG. -| | ... | [Enc] Eth-IPv4-TCP. -| | ... | [Cfg] (Using Honeycomb API) On DUT1 set IPv4 addresses on both\ -| | ... | interfaces to TG, add ARP entry and routes, and configure L4 port ACL\ -| | ... | on ingress interface with src/dst port ranges. -| | ... | [Ver] Send simple TCP and UDP packets from one TG interface\ -| | ... | to the other, using different ports. Receive all packets except\ -| | ... | those with ports in the filtered ranges. -| | Given Setup Interface IPs And Routes For IPv4 IETF-ACL Test -| | ... | L4 | ${acl_name_l4} -| | When Honeycomb Creates ACL Chain Through IETF Node -| | ... | ${dut_node} | ${acl_name_l4} | mixed | ${acl_settings} -| | And Honeycomb Assigns IETF-ACL Chain To Interface -| | ... | ${dut_node} | ${dut_to_tg_if1} | mixed | ingress | ${acl_name_l4} -| | ... | permit | L3 -| | Then Send TCP Or UDP Packet | ${tg_node} -| | ... | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | TCP | ${src_port} | ${dst_port} -| | And Run Keyword And Expect Error | TCP/UDP Rx timeout -| | ... | Send TCP Or UDP Packet | ${tg_node} -| | ... | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | TCP | ${classify_src} | ${classify_dst} - -| TC06: L2,L3 and L4 ACL together on L2-mode interface -| | [Documentation] -| | ... | [Top] TG=DUT1=TG. -| | ... | [Enc] Eth-IPv4-TCP. -| | ... | [Cfg] (Using Honeycomb API) On DUT1 bridge both interfaces to TG\ -| | ... | and configure L2, L3 and L4 ACL on ingress interface\ -| | ... | with src/dst MAC, src/dst IP, protocol and src/dst port ranges. -| | ... | [Ver] Send simple TCP and UDP packets from one TG interface\ -| | ... | to the other, using different MACs, IPv4 IPs and ports. Receive\ -| | ... | all packets except those with MACs, IPs and ports in the filtered\ -| | ... | ranges and UDP protocol payload. -| | [Teardown] | Run Keywords -| | ... | Clear IETF-ACL Settings | ${node} | ${dut_to_tg_if1} | AND -| | ... | Show Packet Trace On All DUTs | ${nodes} | AND -| | ... | Honeycomb Removes All Bridge Domains -| | ... | ${node} | ${dut_to_tg_if1} | ${dut_to_tg_if2} -| | Given Setup Interfaces And Bridge Domain For IETF-ACL Test -| | ... | mixed | ${acl_name_mixed} -| | When Honeycomb Creates ACL Chain Through IETF Node -| | ... | ${dut_node} | ${acl_name_mixed} | mixed | ${acl_settings} -| | And Honeycomb Assigns IETF-ACL Chain To Interface -| | ... | ${dut_node} | ${dut_to_tg_if1} | mixed | ingress | ${acl_name_mixed} -| | ... | permit | L2 -| | Then Send TCP Or UDP Packet | ${tg_node} | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${classify_src_mac} -| | ... | ${tg_to_dut_if2} | ${classify_dst_mac} -| | ... | TCP | ${src_port} | ${dst_port} -| | And Run Keyword And Expect Error | TCP/UDP Rx timeout -| | ... | Send TCP Or UDP Packet | ${tg_node} -| | ... | ${classify_src_ip} | ${classify_dst_ip} -| | ... | ${tg_to_dut_if1} | ${classify_src_mac} -| | ... | ${tg_to_dut_if2} | ${classify_dst_mac} -| | ... | UDP | ${classify_src_port} | ${classify_dst_port} - -| TC07: L2,L3 and L4 ACL together on L3-mode interface -| | [Documentation] -| | ... | [Top] TG=DUT1=TG. -| | ... | [Enc] Eth-IPv4-TCP. -| | ... | [Cfg] (Using Honeycomb API) On DUT1 set IPv4 addresses on both\ -| | ... | interfaces to TG, add ARP entry and routes, and configure\ -| | ... | L2, L3 and L4 ACL on ingress interface with src/dst MAC, src/dst IP,\ -| | ... | protocol and src/dst port ranges. -| | ... | [Ver] Send simple TCP and UDP packets from one TG interface\ -| | ... | to the other, using different MACs, IPv4 IPs and ports. Receive\ -| | ... | all packets except those with MACs, IPs and ports in the filtered\ -| | ... | ranges and UDP protocol payload. -| | Setup Interface IPs And Routes For IPv4 IETF-ACL Test -| | ... | mixed | ${acl_name_mixed} -| | When Honeycomb Creates ACL Chain Through IETF Node -| | ... | ${dut_node} | ${acl_name_mixed} | mixed | ${acl_settings} -| | And Honeycomb Assigns IETF-ACL Chain To Interface -| | ... | ${dut_node} | ${dut_to_tg_if1} | mixed | ingress | ${acl_name_mixed} -| | ... | permit | L3 -| | Then Send TCP Or UDP Packet | ${tg_node} | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${classify_src_mac} -| | ... | ${tg_to_dut_if2} | ${classify_dst_mac} -| | ... | TCP | ${src_port} | ${dst_port} -| | And Run Keyword And Expect Error | TCP/UDP Rx timeout -| | ... | Send TCP Or UDP Packet | ${tg_node} -| | ... | ${classify_src_ip} | ${classify_dst_ip} -| | ... | ${tg_to_dut_if1} | ${classify_src_mac} -| | ... | ${tg_to_dut_if2} | ${classify_dst_mac} -| | ... | UDP | ${classify_src_port} | ${classify_dst_port} - -| TC08: Multiple classify rules in one ACL -| | [Documentation] -| | ... | [Top] TG=DUT1=TG. -| | ... | [Enc] Eth-IPv4-TCP. -| | ... | [Cfg] (Using Honeycomb API) On DUT1 bridge both interfaces to TG\ -| | ... | and configure a series of L2 MAC ACL rules on ingress interface. -| | ... | [Ver] Send simple TCP packets from one TG interface to the other,\ -| | ... | using different MACs. Receive all packets except those with\ -| | ... | MACs in the ranges filtered by any rule. -| | [Teardown] | Run Keywords -| | ... | Clear IETF-ACL Settings | ${node} | ${dut_to_tg_if1} | AND -| | ... | Show Packet Trace On All DUTs | ${nodes} | AND -| | ... | Honeycomb Removes All Bridge Domains -| | ... | ${node} | ${dut_to_tg_if1} | ${dut_to_tg_if2} -| | Given Setup Interfaces And Bridge Domain For IETF-ACL Test -| | ... | multirule | ${acl_name_multirule} -| | When Honeycomb Creates ACL Chain Through IETF Node -| | ... | ${dut_node} | ${acl_name_multirule} | L2 | ${acl_settings} -| | And Honeycomb Assigns IETF-ACL Chain To Interface -| | ... | ${dut_node} | ${dut_to_tg_if1} | L2 | ingress | ${acl_name_multirule} -| | ... | permit -| | Then Send TCP Or UDP Packet | ${tg_node} | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${src_mac} -| | ... | ${tg_to_dut_if2} | ${dst_mac} -| | ... | TCP | ${src_port} | ${dst_port} -| | And Run Keyword And Expect Error | TCP/UDP Rx timeout -| | ... | Send TCP Or UDP Packet | ${tg_node} | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${classify_src} -| | ... | ${tg_to_dut_if2} | ${classify_dst} -| | ... | TCP | ${src_port} | ${dst_port} -| | And Run Keyword And Expect Error | TCP/UDP Rx timeout -| | ... | Send TCP Or UDP Packet | ${tg_node} | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${classify_src2} -| | ... | ${tg_to_dut_if2} | ${classify_dst2} -| | ... | TCP | ${src_port} | ${dst_port} - -*** Keywords *** -| Setup interface IPs and routes for IPv4 ietf-ACL test -| | [Arguments] | ${test_data_id} | ${acl_name} -| | Path for 2-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | Import Variables | resources/test_data/honeycomb/ietf_acl.py -| | ... | ${test_data_id} | ${acl_name} -| | Honeycomb sets interface state | ${dut_node} | ${dut_to_tg_if1} | up -| | Honeycomb sets interface state | ${dut_node} | ${dut_to_tg_if2} | up -| | Honeycomb sets interface ipv4 address with prefix | ${dut_node} -| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip} | ${prefix_length} -| | Honeycomb sets interface ipv4 address with prefix | ${dut_node} -| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip} | ${prefix_length} -# TODO: Configure routes through Honeycomb when implemented.(Honeycomb-58) -| | Add ARP on DUT -| | ... | ${node} | ${dut_to_tg_if2} | ${gateway} | ${tg_to_dut_if2_mac} -| | VPP Route Add -| | ... | ${node} | ${dst_net} | ${prefix_length} | ${gateway} -| | ... | interface=${dut_to_tg_if2} | use_sw_index=False -| | VPP Route Add -| | ... | ${node} | ${classify_dst_net} | ${prefix_length} | ${gateway} -| | ... | interface=${dut_to_tg_if2} | use_sw_index=False - -| Setup interfaces and bridge domain for ietf-ACL test -| | [Arguments] | ${test_data_id} | ${acl_name} -| | Path For 2-node Testing Is Set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | Import Variables | resources/test_data/honeycomb/ietf_acl.py -| | ... | ${test_data_id} | ${acl_name} -| | Honeycomb Sets Interface State | ${dut_node} | ${dut_to_tg_if1} | up -| | Honeycomb Sets Interface State | ${dut_node} | ${dut_to_tg_if2} | up -| | Honeycomb Creates first L2 Bridge Domain -| | ... | ${dut_node} | ${bd_name} | ${bd_settings} -| | Honeycomb Adds Interfaces To Bridge Domain -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${dut_to_tg_if2} -| | ... | ${bd_name} | ${bd_if_settings}
\ No newline at end of file |