diff options
Diffstat (limited to 'tests/func/honeycomb/mgmt-cfg-ietfacl-apihc-apivat-func.robot')
| -rw-r--r-- | tests/func/honeycomb/mgmt-cfg-ietfacl-apihc-apivat-func.robot | 374 |
1 files changed, 374 insertions, 0 deletions
diff --git a/tests/func/honeycomb/mgmt-cfg-ietfacl-apihc-apivat-func.robot b/tests/func/honeycomb/mgmt-cfg-ietfacl-apihc-apivat-func.robot new file mode 100644 index 0000000000..a0b967980a --- /dev/null +++ b/tests/func/honeycomb/mgmt-cfg-ietfacl-apihc-apivat-func.robot @@ -0,0 +1,374 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Variables *** +| &{if_settings}= | enabled=True +# Bridge domain settings +| ${bd_name}= | bd1 +| &{bd_settings}= | flood=${True} | forward=${True} | learn=${True} +| ... | unknown-unicast-flood=${True} | arp-termination=${False} +| &{bd_if_settings}= | split_horizon_group=${0} | bvi=${False} +# Names for AC lists +| ${acl_name_l2}= | acl_l2 +| ${acl_name_l3_ip4}= | acl_l3_ip4 +| ${acl_name_l3_ip6}= | acl_l3_ip6 +| ${acl_name_l4}= | acl_l4 +| ${acl_name_mixed}= | acl_mixed +| ${acl_name_multirule}= | acl_multirule + +*** Settings *** +| Resource | resources/libraries/robot/default.robot +| Resource | resources/libraries/robot/honeycomb/honeycomb.robot +| Resource | resources/libraries/robot/honeycomb/interfaces.robot +| Resource | resources/libraries/robot/honeycomb/bridge_domain.robot +| Resource | resources/libraries/robot/honeycomb/access_control_lists.robot +| Resource | resources/libraries/robot/testing_path.robot +| Resource | resources/libraries/robot/traffic.robot +| Library | resources.libraries.python.honeycomb.HcAPIKwACL.ACLKeywords +| Library | resources.libraries.python.Trace +| Library | resources.libraries.python.IPv4Setup +| Library | resources.libraries.python.IPv4Util +| Library | resources.libraries.python.IPv6Util +| Library | resources.libraries.python.Routing +| Test Teardown | Run Keywords | Clear IETF-ACL settings +| ... | ${node} | ${dut_to_tg_if1} | AND +| ... | Show Packet Trace on All DUTs | ${nodes} +| Suite Teardown | Run Keyword If Any Tests Failed +| ... | Restart Honeycomb And VPP And Clear Persisted Configuration | ${node} +| Documentation | *Honeycomb access control lists test suite for IETF-ACL node.* +# Test suite out of date since https://gerrit.fd.io/r/#/c/4331/ +# | Force Tags | Honeycomb_sanity + +*** Test Cases *** +| TC01: L2 ACL MAC filtering through IETF-ACL node +| | [Documentation] +| | ... | [Top] TG=DUT1=TG. +| | ... | [Enc] Eth-IPv4-TCP. +| | ... | [Cfg] (Using Honeycomb API) On DUT1 bridge both interfaces to TG\ +| | ... | and configure L2 MAC ACL on ingress interface. +| | ... | [Ver] Send simple TCP packets from one TG interface to the other,\ +| | ... | using different MACs. Receive all packets except those with\ +| | ... | MACs in the filtered ranges. +| | [Teardown] | Run Keywords +| | ... | Clear IETF-ACL Settings | ${node} | ${dut_to_tg_if1} | AND +| | ... | Show Packet Trace On All DUTs | ${nodes} | AND +| | ... | Honeycomb Removes All Bridge Domains +| | ... | ${node} | ${dut_to_tg_if1} | ${dut_to_tg_if2} +| | Given Setup Interfaces And Bridge Domain For IETF-ACL Test +| | ... | L2 | ${acl_name_l2} +| | When Honeycomb Creates ACL Chain Through IETF Node +| | ... | ${dut_node} | ${acl_name_l2} | L2 | ${acl_settings} +| | And Honeycomb Assigns IETF-ACL Chain To Interface +| | ... | ${dut_node} | ${dut_to_tg_if1} | L2 | ingress | ${acl_name_l2} +| | ... | permit +| | Then Send TCP Or UDP Packet | ${tg_node} | ${src_ip} | ${dst_ip} +| | ... | ${tg_to_dut_if1} | ${src_mac} +| | ... | ${tg_to_dut_if2} | ${dst_mac} +| | ... | TCP | ${src_port} | ${dst_port} +| | And Run Keyword And Expect Error | TCP/UDP Rx timeout +| | ... | Send TCP Or UDP Packet | ${tg_node} | ${src_ip} | ${dst_ip} +| | ... | ${tg_to_dut_if1} | ${classify_src} +| | ... | ${tg_to_dut_if2} | ${classify_dst} +| | ... | TCP | ${src_port} | ${dst_port} +| | And Run Keyword And Expect Error | TCP/UDP Rx timeout +| | ... | Send TCP Or UDP Packet | ${tg_node} | ${src_ip} | ${dst_ip} +| | ... | ${tg_to_dut_if1} | ${classify_src2} +| | ... | ${tg_to_dut_if2} | ${classify_dst2} +| | ... | TCP | ${src_port} | ${dst_port} + +| TC02: L2 ACL MAC filtering through IETF-ACL node on egress interface +| | [Documentation] +| | ... | [Top] TG=DUT1=TG. +| | ... | [Enc] Eth-IPv4-TCP. +| | ... | [Cfg] (Using Honeycomb API) On DUT1 bridge both interfaces to TG\ +| | ... | and configure L2 MAC ACL on egress interface. +| | ... | [Ver] Send simple TCP packets from one TG interface to the other,\ +| | ... | using different MACs. Receive all packets except those with\ +| | ... | MACs in the filtered ranges. +| | [Teardown] | Run Keywords +| | ... | Clear IETF-ACL Settings | ${node} | ${dut_to_tg_if2} | AND +| | ... | Show Packet Trace On All DUTs | ${nodes} | AND +| | ... | Honeycomb Removes All Bridge Domains +| | ... | ${node} | ${dut_to_tg_if1} | ${dut_to_tg_if2} +| | Given Setup Interfaces And Bridge Domain For IETF-ACL Test +| | ... | L2 | ${acl_name_l2} +| | When Honeycomb Creates ACL Chain Through IETF Node +| | ... | ${dut_node} | ${acl_name_l2} | L2 | ${acl_settings} +| | And Honeycomb Assigns IETF-ACL Chain To Interface +| | ... | ${dut_node} | ${dut_to_tg_if2} | L2 | egress | ${acl_name_l2} +| | ... | permit +| | Then Send TCP Or UDP Packet | ${tg_node} | ${src_ip} | ${dst_ip} +| | ... | ${tg_to_dut_if1} | ${src_mac} +| | ... | ${tg_to_dut_if2} | ${dst_mac} +| | ... | TCP | ${src_port} | ${dst_port} +| | And Run Keyword And Expect Error | TCP/UDP Rx timeout +| | ... | Send TCP Or UDP Packet | ${tg_node} | ${src_ip} | ${dst_ip} +| | ... | ${tg_to_dut_if1} | ${classify_src} +| | ... | ${tg_to_dut_if2} | ${classify_dst} +| | ... | TCP | ${src_port} | ${dst_port} +| | And Run Keyword And Expect Error | TCP/UDP Rx timeout +| | ... | Send TCP Or UDP Packet | ${tg_node} | ${src_ip} | ${dst_ip} +| | ... | ${tg_to_dut_if1} | ${classify_src2} +| | ... | ${tg_to_dut_if2} | ${classify_dst2} +| | ... | TCP | ${src_port} | ${dst_port} + +| TC03: L3 ACL IPv4 filtering through IETF-ACL node +| | [Documentation] +| | ... | [Top] TG=DUT1=TG. +| | ... | [Enc] Eth-IPv4-TCP. +| | ... | [Cfg] (Using Honeycomb API) On DUT1 set IPv4 addresses on both\ +| | ... | interfaces to TG, add ARP entry and routes, and configure L3 IPv4 ACL\ +| | ... | on ingress interface with src/dst IP and protocol. +| | ... | [Ver] Send simple TCP and UDP packets from one TG interface\ +| | ... | to the other, using different IPv4 IPs. Receive all packets except\ +| | ... | those with IPs in the filtered ranges and UDP protocol payload. +| | Given Setup Interface IPs And Routes For IPv4 IETF-ACL Test +| | ... | L3_IP4 | ${acl_name_l3_ip4} +| | When Honeycomb Creates ACL Chain Through IETF Node +| | ... | ${dut_node} | ${acl_name_l3_ip4} | L3_IP4 | ${acl_settings} +| | And Honeycomb Assigns IETF-ACL Chain To Interface +| | ... | ${dut_node} | ${dut_to_tg_if1} | L3_IP4 | ingress | ${acl_name_l3_ip4} +| | ... | permit +| | Then Send TCP Or UDP Packet | ${tg_node} +| | ... | ${src_ip} | ${dst_ip} +| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} +| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} +| | ... | UDP | ${src_port} | ${dst_port} +| | And Send TCP Or UDP Packet | ${tg_node} +| | ... | ${classify_src} | ${classify_dst} +| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} +| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} +| | ... | TCP | ${src_port} | ${dst_port} +| | And Run Keyword And Expect Error | TCP/UDP Rx timeout +| | ... | Send TCP Or UDP Packet | ${tg_node} +| | ... | ${classify_src} | ${classify_dst} +| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} +| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} +| | ... | UDP | ${src_port} | ${dst_port} + +| TC04: L3 ACL IPv6 filtering through IETF-ACL node +| | [Documentation] +| | ... | [Top] TG=DUT1=TG. +| | ... | [Enc] Eth-IPv4-TCP. +| | ... | [Cfg] (Using Honeycomb API) On DUT1 set IPv6 addresses on both\ +| | ... | interfaces to TG, add IP neighbor entry and routes, and configure\ +| | ... | L3 IPv6 ACL on ingress interface with src/dst IP and next-header. +| | ... | [Ver] Send simple TCP and UDP packets from one TG interface\ +| | ... | to the other, using different IPv6 IPs. Receive all packets except\ +| | ... | those with IPs in the filtered ranges and UDP protocol payload. +| | Given Path for 2-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} +| | And Import Variables | resources/test_data/honeycomb/ietf_acl.py +| | ... | L3_IP6 | ${acl_name_l3_ip6} +| | And Honeycomb sets interface state | ${dut_node} | ${dut_to_tg_if1} | up +| | And Honeycomb sets interface state | ${dut_node} | ${dut_to_tg_if2} | up +# TODO: Configure addresses through Honeycomb when implemented. (Honeycomb-102) +| | And Set Interface Address | ${dut_node} +| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip} | ${prefix_length} +| | And Set Interface Address | ${dut_node} +| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip} | ${prefix_length} +| | And VPP RA suppress link layer | ${dut_node} | ${dut_to_tg_if2} +# TODO: Configure route through Honeycomb when implemented.(Honeycomb-58) +| | And Add IP Neighbor +| | ... | ${node} | ${dut_to_tg_if2} | ${gateway} | ${tg_to_dut_if2_mac} +| | And VPP Route Add | ${node} | ${dst_net} | ${prefix_length} +| | ... | ${gateway} | interface=${dut_to_tg_if2} | use_sw_index=False +| | And VPP Route Add | ${node} | ${classify_dst_net} | ${prefix_length} +| | ... | ${gateway} | interface=${dut_to_tg_if2} | use_sw_index=False +| | When Honeycomb Creates ACL Chain Through IETF Node +| | ... | ${dut_node} | ${acl_name_l3_ip6} | L3_IP6 | ${acl_settings} +| | And Honeycomb Assigns IETF-ACL Chain To Interface +| | ... | ${dut_node} | ${dut_to_tg_if1} | L3_IP6 | ingress | ${acl_name_l3_ip6} +| | ... | permit +| | Then Send TCP Or UDP Packet | ${tg_node} +| | ... | ${src_ip} | ${dst_ip} +| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} +| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} +| | ... | UDP | ${src_port} | ${dst_port} +| | And Send TCP Or UDP Packet | ${tg_node} +| | ... | ${classify_src} | ${classify_dst} +| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} +| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} +| | ... | TCP | ${src_port} | ${dst_port} +| | And Run Keyword And Expect Error | TCP/UDP Rx timeout +| | ... | Send TCP Or UDP Packet | ${tg_node} +| | ... | ${classify_src} | ${classify_dst} +| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} +| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} +| | ... | UDP | ${src_port} | ${dst_port} + +| TC05: L4 ACL port filtering through IETF-ACL node +| | [Documentation] +| | ... | [Top] TG=DUT1=TG. +| | ... | [Enc] Eth-IPv4-TCP. +| | ... | [Cfg] (Using Honeycomb API) On DUT1 set IPv4 addresses on both\ +| | ... | interfaces to TG, add ARP entry and routes, and configure L4 port ACL\ +| | ... | on ingress interface with src/dst port ranges. +| | ... | [Ver] Send simple TCP and UDP packets from one TG interface\ +| | ... | to the other, using different ports. Receive all packets except\ +| | ... | those with ports in the filtered ranges. +| | Given Setup Interface IPs And Routes For IPv4 IETF-ACL Test +| | ... | L4 | ${acl_name_l4} +| | When Honeycomb Creates ACL Chain Through IETF Node +| | ... | ${dut_node} | ${acl_name_l4} | mixed | ${acl_settings} +| | And Honeycomb Assigns IETF-ACL Chain To Interface +| | ... | ${dut_node} | ${dut_to_tg_if1} | mixed | ingress | ${acl_name_l4} +| | ... | permit | L3 +| | Then Send TCP Or UDP Packet | ${tg_node} +| | ... | ${src_ip} | ${dst_ip} +| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} +| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} +| | ... | TCP | ${src_port} | ${dst_port} +| | And Run Keyword And Expect Error | TCP/UDP Rx timeout +| | ... | Send TCP Or UDP Packet | ${tg_node} +| | ... | ${src_ip} | ${dst_ip} +| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} +| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} +| | ... | TCP | ${classify_src} | ${classify_dst} + +| TC06: L2,L3 and L4 ACL together on L2-mode interface +| | [Documentation] +| | ... | [Top] TG=DUT1=TG. +| | ... | [Enc] Eth-IPv4-TCP. +| | ... | [Cfg] (Using Honeycomb API) On DUT1 bridge both interfaces to TG\ +| | ... | and configure L2, L3 and L4 ACL on ingress interface\ +| | ... | with src/dst MAC, src/dst IP, protocol and src/dst port ranges. +| | ... | [Ver] Send simple TCP and UDP packets from one TG interface\ +| | ... | to the other, using different MACs, IPv4 IPs and ports. Receive\ +| | ... | all packets except those with MACs, IPs and ports in the filtered\ +| | ... | ranges and UDP protocol payload. +| | [Teardown] | Run Keywords +| | ... | Clear IETF-ACL Settings | ${node} | ${dut_to_tg_if1} | AND +| | ... | Show Packet Trace On All DUTs | ${nodes} | AND +| | ... | Honeycomb Removes All Bridge Domains +| | ... | ${node} | ${dut_to_tg_if1} | ${dut_to_tg_if2} +| | Given Setup Interfaces And Bridge Domain For IETF-ACL Test +| | ... | mixed | ${acl_name_mixed} +| | When Honeycomb Creates ACL Chain Through IETF Node +| | ... | ${dut_node} | ${acl_name_mixed} | mixed | ${acl_settings} +| | And Honeycomb Assigns IETF-ACL Chain To Interface +| | ... | ${dut_node} | ${dut_to_tg_if1} | mixed | ingress | ${acl_name_mixed} +| | ... | permit | L2 +| | Then Send TCP Or UDP Packet | ${tg_node} | ${src_ip} | ${dst_ip} +| | ... | ${tg_to_dut_if1} | ${classify_src_mac} +| | ... | ${tg_to_dut_if2} | ${classify_dst_mac} +| | ... | TCP | ${src_port} | ${dst_port} +| | And Run Keyword And Expect Error | TCP/UDP Rx timeout +| | ... | Send TCP Or UDP Packet | ${tg_node} +| | ... | ${classify_src_ip} | ${classify_dst_ip} +| | ... | ${tg_to_dut_if1} | ${classify_src_mac} +| | ... | ${tg_to_dut_if2} | ${classify_dst_mac} +| | ... | UDP | ${classify_src_port} | ${classify_dst_port} + +| TC07: L2,L3 and L4 ACL together on L3-mode interface +| | [Documentation] +| | ... | [Top] TG=DUT1=TG. +| | ... | [Enc] Eth-IPv4-TCP. +| | ... | [Cfg] (Using Honeycomb API) On DUT1 set IPv4 addresses on both\ +| | ... | interfaces to TG, add ARP entry and routes, and configure\ +| | ... | L2, L3 and L4 ACL on ingress interface with src/dst MAC, src/dst IP,\ +| | ... | protocol and src/dst port ranges. +| | ... | [Ver] Send simple TCP and UDP packets from one TG interface\ +| | ... | to the other, using different MACs, IPv4 IPs and ports. Receive\ +| | ... | all packets except those with MACs, IPs and ports in the filtered\ +| | ... | ranges and UDP protocol payload. +| | Setup Interface IPs And Routes For IPv4 IETF-ACL Test +| | ... | mixed | ${acl_name_mixed} +| | When Honeycomb Creates ACL Chain Through IETF Node +| | ... | ${dut_node} | ${acl_name_mixed} | mixed | ${acl_settings} +| | And Honeycomb Assigns IETF-ACL Chain To Interface +| | ... | ${dut_node} | ${dut_to_tg_if1} | mixed | ingress | ${acl_name_mixed} +| | ... | permit | L3 +| | Then Send TCP Or UDP Packet | ${tg_node} | ${src_ip} | ${dst_ip} +| | ... | ${tg_to_dut_if1} | ${classify_src_mac} +| | ... | ${tg_to_dut_if2} | ${classify_dst_mac} +| | ... | TCP | ${src_port} | ${dst_port} +| | And Run Keyword And Expect Error | TCP/UDP Rx timeout +| | ... | Send TCP Or UDP Packet | ${tg_node} +| | ... | ${classify_src_ip} | ${classify_dst_ip} +| | ... | ${tg_to_dut_if1} | ${classify_src_mac} +| | ... | ${tg_to_dut_if2} | ${classify_dst_mac} +| | ... | UDP | ${classify_src_port} | ${classify_dst_port} + +| TC08: Multiple classify rules in one ACL +| | [Documentation] +| | ... | [Top] TG=DUT1=TG. +| | ... | [Enc] Eth-IPv4-TCP. +| | ... | [Cfg] (Using Honeycomb API) On DUT1 bridge both interfaces to TG\ +| | ... | and configure a series of L2 MAC ACL rules on ingress interface. +| | ... | [Ver] Send simple TCP packets from one TG interface to the other,\ +| | ... | using different MACs. Receive all packets except those with\ +| | ... | MACs in the ranges filtered by any rule. +| | [Teardown] | Run Keywords +| | ... | Clear IETF-ACL Settings | ${node} | ${dut_to_tg_if1} | AND +| | ... | Show Packet Trace On All DUTs | ${nodes} | AND +| | ... | Honeycomb Removes All Bridge Domains +| | ... | ${node} | ${dut_to_tg_if1} | ${dut_to_tg_if2} +| | Given Setup Interfaces And Bridge Domain For IETF-ACL Test +| | ... | multirule | ${acl_name_multirule} +| | When Honeycomb Creates ACL Chain Through IETF Node +| | ... | ${dut_node} | ${acl_name_multirule} | L2 | ${acl_settings} +| | And Honeycomb Assigns IETF-ACL Chain To Interface +| | ... | ${dut_node} | ${dut_to_tg_if1} | L2 | ingress | ${acl_name_multirule} +| | ... | permit +| | Then Send TCP Or UDP Packet | ${tg_node} | ${src_ip} | ${dst_ip} +| | ... | ${tg_to_dut_if1} | ${src_mac} +| | ... | ${tg_to_dut_if2} | ${dst_mac} +| | ... | TCP | ${src_port} | ${dst_port} +| | And Run Keyword And Expect Error | TCP/UDP Rx timeout +| | ... | Send TCP Or UDP Packet | ${tg_node} | ${src_ip} | ${dst_ip} +| | ... | ${tg_to_dut_if1} | ${classify_src} +| | ... | ${tg_to_dut_if2} | ${classify_dst} +| | ... | TCP | ${src_port} | ${dst_port} +| | And Run Keyword And Expect Error | TCP/UDP Rx timeout +| | ... | Send TCP Or UDP Packet | ${tg_node} | ${src_ip} | ${dst_ip} +| | ... | ${tg_to_dut_if1} | ${classify_src2} +| | ... | ${tg_to_dut_if2} | ${classify_dst2} +| | ... | TCP | ${src_port} | ${dst_port} + +*** Keywords *** +| Setup interface IPs and routes for IPv4 ietf-ACL test +| | [Arguments] | ${test_data_id} | ${acl_name} +| | Path for 2-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} +| | Import Variables | resources/test_data/honeycomb/ietf_acl.py +| | ... | ${test_data_id} | ${acl_name} +| | Honeycomb sets interface state | ${dut_node} | ${dut_to_tg_if1} | up +| | Honeycomb sets interface state | ${dut_node} | ${dut_to_tg_if2} | up +| | Honeycomb sets interface ipv4 address with prefix | ${dut_node} +| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip} | ${prefix_length} +| | Honeycomb sets interface ipv4 address with prefix | ${dut_node} +| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip} | ${prefix_length} +# TODO: Configure routes through Honeycomb when implemented.(Honeycomb-58) +| | Add ARP on DUT +| | ... | ${node} | ${dut_to_tg_if2} | ${gateway} | ${tg_to_dut_if2_mac} +| | VPP Route Add +| | ... | ${node} | ${dst_net} | ${prefix_length} | ${gateway} +| | ... | interface=${dut_to_tg_if2} | use_sw_index=False +| | VPP Route Add +| | ... | ${node} | ${classify_dst_net} | ${prefix_length} | ${gateway} +| | ... | interface=${dut_to_tg_if2} | use_sw_index=False + +| Setup interfaces and bridge domain for ietf-ACL test +| | [Arguments] | ${test_data_id} | ${acl_name} +| | Path For 2-node Testing Is Set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} +| | Import Variables | resources/test_data/honeycomb/ietf_acl.py +| | ... | ${test_data_id} | ${acl_name} +| | Honeycomb Sets Interface State | ${dut_node} | ${dut_to_tg_if1} | up +| | Honeycomb Sets Interface State | ${dut_node} | ${dut_to_tg_if2} | up +| | Honeycomb Creates first L2 Bridge Domain +| | ... | ${dut_node} | ${bd_name} | ${bd_settings} +| | Honeycomb Adds Interfaces To Bridge Domain +| | ... | ${dut_node} | ${dut_to_tg_if1} | ${dut_to_tg_if2} +| | ... | ${bd_name} | ${bd_if_settings}
\ No newline at end of file |