diff options
Diffstat (limited to 'tests/func/honeycomb/mgmt-cfg-pluginacl-apihc-apivat-func.robot')
| -rw-r--r-- | tests/func/honeycomb/mgmt-cfg-pluginacl-apihc-apivat-func.robot | 742 |
1 files changed, 0 insertions, 742 deletions
diff --git a/tests/func/honeycomb/mgmt-cfg-pluginacl-apihc-apivat-func.robot b/tests/func/honeycomb/mgmt-cfg-pluginacl-apihc-apivat-func.robot deleted file mode 100644 index d9a3933578..0000000000 --- a/tests/func/honeycomb/mgmt-cfg-pluginacl-apihc-apivat-func.robot +++ /dev/null @@ -1,742 +0,0 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Variables *** -| &{if_settings}= | enabled=True -# Bridge domain settings -| ${bd_name}= | bd1 -| &{bd_settings}= | flood=${True} | forward=${True} | learn=${True} -| ... | unknown-unicast-flood=${True} | arp-termination=${False} -| &{bd_if_settings}= | split_horizon_group=${0} | bvi=${False} -# Names for AC lists -| ${acl_name_macip}= | macip -| ${acl_name_l3_ip4}= | acl_l3_ip4 -| ${acl_name_l3_ip6}= | acl_l3_ip6 -| ${acl_name_l4}= | acl_l4 -| ${acl_name_mixed}= | acl_mixed -| ${acl_name_icmp}= | acl_icmp -| ${acl_name_icmpv6}= | acl_icmpv6 -| ${acl_name_reflex}= | acl_reflex - -*** Settings *** -| Resource | resources/libraries/robot/default.robot -| Resource | resources/libraries/robot/honeycomb/honeycomb.robot -| Resource | resources/libraries/robot/honeycomb/interfaces.robot -| Resource | resources/libraries/robot/honeycomb/bridge_domain.robot -| Resource | resources/libraries/robot/honeycomb/access_control_lists.robot -| Resource | resources/libraries/robot/testing_path.robot -| Resource | resources/libraries/robot/traffic.robot -| Library | resources.libraries.python.honeycomb.HcAPIKwACL.ACLKeywords -| Library | resources.libraries.python.Trace -| Library | resources.libraries.python.IPv4Setup -| Library | resources.libraries.python.IPv4Util -| Library | resources.libraries.python.IPv6Util -| Library | resources.libraries.python.Routing -| ... -| Test Setup | Clear Packet Trace on All DUTs | ${nodes} -| ... -| Suite Setup | Set Up Honeycomb Functional Test Suite | ${node} -| ... -| Suite Teardown | Tear Down Honeycomb Functional Test Suite | ${node} -| ... -| Documentation | *Honeycomb access control lists test suite for ACL plugin.* -| ... -# Failing due to HC2VPP-173: cannot clean up ACLs in test teardown -| Force Tags | HC_FUNC | EXPECTED_FAILING - -*** Test Cases *** -| TC01: ACL MAC filtering through plugin-acl node - bridged -| | [Documentation] -| | ... | [Top] TG=DUT1=TG. -| | ... | [Enc] Eth-IPv4-TCP. -| | ... | [Cfg] (Using Honeycomb API) On DUT1 bridge both interfaces to TG\ -| | ... | and configure L2 MAC ACL on ingress interface. -| | ... | [Ver] Send simple TCP packets from one TG interface to the other,\ -| | ... | using different MACs. Receive all packets except those with\ -| | ... | MACs in the filtered ranges. -| | ... -| | [Teardown] | Bridged ACL test teardown -| | ... -| | Given Setup Interfaces And Bridge Domain For plugin-acl Test -| | ... | macip | ${acl_name_macip} -| | When Honeycomb Creates ACL Chain Through ACL plugin -| | ... | ${dut_node} | ${acl_name_macip} | ${acl_settings} | macip=${True} -| | And Honeycomb Assigns plugin-acl Chain To Interface -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_macip} -| | ... | ingress | macip=${True} -| | Then Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | TCP | ${src_port} | ${dst_port} -| | And Run Keyword And Expect Error | TCP/UDP Rx timeout -| | ... | Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${classify_src} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | TCP | ${src_port} | ${dst_port} -| | And Run Keyword And Expect Error | TCP/UDP Rx timeout -| | ... | Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${classify_src2} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | TCP | ${src_port} | ${dst_port} - -| TC02: ACL IPv4 filtering through plugin-acl node - bridged -| | [Documentation] -| | ... | [Top] TG=DUT1=TG. -| | ... | [Enc] Eth-IPv4-TCP. -| | ... | [Cfg] (Using Honeycomb API) On DUT1 bridge both interfaces to TG\ -| | ... | and configure L3 IPv4 ACL on ingress interface with src/dst IP -| | ... | and protocol number. -| | ... | [Ver] Send simple TCP and UDP packets from one TG interface\ -| | ... | to the other, using different IPv4 IPs. Receive all packets except\ -| | ... | those with IPs in the filtered ranges and UDP protocol payload. -| | ... -| | [Teardown] | Bridged ACL test teardown -| | ... -| | Given Setup Interfaces And Bridge Domain For plugin-acl Test -| | ... | l3_ip4 | ${acl_name_l3_ip4} -| | When Honeycomb Creates ACL Chain Through ACL plugin -| | ... | ${dut_node} | ${acl_name_l3_ip4} | ${acl_settings} -| | And Honeycomb Assigns plugin-acl Chain To Interface -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_l3_ip4} | ingress -| | Then Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | UDP | ${src_port} | ${dst_port} -| | And Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${classify_src} | ${classify_dst} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | TCP | ${src_port} | ${dst_port} -| | And Run Keyword And Expect Error | TCP/UDP Rx timeout -| | ... | Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${classify_src} | ${classify_dst} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | UDP | ${src_port} | ${dst_port} - -| TC03: ACL IPv6 filtering through plugin-acl node - bridged -| | [Documentation] -| | ... | [Top] TG=DUT1=TG. -| | ... | [Enc] Eth-IPv6-TCP. -| | ... | [Cfg] (Using Honeycomb API) On DUT1 bridge both interfaces to TG\ -| | ... | and configure L3 IPv6 ACL on ingress interface with src/dst IP -| | ... | and protocol number. -| | ... | [Ver] Send simple TCP and UDP packets from one TG interface\ -| | ... | to the other, using different IPv6 IPs. Receive all packets except\ -| | ... | those with IPs in the filtered ranges and UDP protocol payload. -| | ... -| | [Teardown] | Bridged ACL test teardown -| | ... -| | Given Setup interfaces and bridge domain for plugin-acl test -| | ... | l3_ip6 | ${acl_name_l3_ip6} -| | When Honeycomb Creates ACL Chain Through ACL plugin -| | ... | ${dut_node} | ${acl_name_l3_ip6} | ${acl_settings} -| | And Honeycomb Assigns plugin-acl Chain To Interface -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_l3_ip6} | ingress -| | Then Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | UDP | ${src_port} | ${dst_port} -| | And Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${classify_src} | ${classify_dst} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | TCP | ${src_port} | ${dst_port} -| | And Run Keyword And Expect Error | TCP/UDP Rx timeout -| | ... | Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${classify_src} | ${classify_dst} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | UDP | ${src_port} | ${dst_port} - -| TC04: ACL port filtering through plugin-acl node - bridged -| | [Documentation] -| | ... | [Top] TG=DUT1=TG. -| | ... | [Enc] Eth-IPv4-TCP. -| | ... | [Cfg] (Using Honeycomb API) On DUT1 bridge both interfaces to TG\ -| | ... | and and configure L4 port ACL on ingress interface -| | ... | with src/dst port ranges. -| | ... | [Ver] Send simple TCP and UDP packets from one TG interface\ -| | ... | to the other, using different ports. Receive all packets except\ -| | ... | those with ports in the filtered ranges. -| | ... -| | [Teardown] | Bridged ACL test teardown -| | ... -| | Given Setup interfaces and bridge domain for plugin-acl test -| | ... | L4 | ${acl_name_l4} -| | When Honeycomb Creates ACL Chain Through ACL plugin -| | ... | ${dut_node} | ${acl_name_l4} | ${acl_settings} -| | And Honeycomb Assigns plugin-acl Chain To Interface -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_l4} | ingress -| | Then Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | TCP | ${src_port} | ${dst_port} -| | And Run Keyword And Expect Error | TCP/UDP Rx timeout -| | ... | Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | TCP | ${classify_src} | ${classify_dst} -| | And Run Keyword And Expect Error | TCP/UDP Rx timeout -| | ... | Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | TCP | ${classify_src+5} | ${classify_dst+5} - -| TC05: ACL filtering with IPv4 address and TCP port in one rule - bridged -| | [Documentation] -| | ... | [Top] TG=DUT1=TG. -| | ... | [Enc] Eth-IPv4-TCP. -| | ... | [Cfg] (Using Honeycomb API) On DUT1 bridge both interfaces to TG\ -| | ... | and configure a mixed rule with src/dst IP, TCP protocol -| | ... | and port ranges. -| | ... | [Ver] Send simple TCP packets from one TG interface to the other,\ -| | ... | using IPs and ports. Receive all packets except those with\ -| | ... | both IPs and ports in the filtered ranges. -| | ... -| | [Teardown] | Bridged ACL test teardown -| | ... -| | Given Setup Interfaces And Bridge Domain For plugin-acl Test -| | ... | mixed | ${acl_name_mixed} -| | When Honeycomb Creates ACL Chain Through ACL plugin -| | ... | ${dut_node} | ${acl_name_mixed} | ${acl_settings} -| | And Honeycomb Assigns plugin-acl Chain To Interface -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_mixed} | ingress -| | Then Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | TCP | ${src_port} | ${dst_port} -| | Then Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${classify_src_ip} | ${classify_dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | TCP | ${src_port} | ${dst_port} -| | And Run Keyword And Expect Error | TCP/UDP Rx timeout -| | ... | Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${classify_src_ip} | ${classify_dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | TCP | ${classify_src_port} | ${classify_dst_port} - -| TC06: ACL ICMP packet filtering - bridged -| | [Documentation] -| | ... | [Top] TG=DUT1=TG. -| | ... | [Enc] Eth-IPv4-ICMP. -| | ... | [Cfg] (Using Honeycomb API) On DUT1 bridge both interfaces to TG\ -| | ... | and configure a ICMP protocol filtering by ICMP type and code. -| | ... | [Ver] Send ICMP packets from one TG interface\ -| | ... | to the other, using different codes and types. Receive all packets\ -| | ... | except those with types and codes in the filtered ranges. -| | ... -| | [Teardown] | Bridged ACL test teardown -| | ... -| | Given Setup interfaces and bridge domain for plugin-acl test -| | ... | icmp | ${acl_name_icmp} -| | When Honeycomb Creates ACL Chain Through ACL plugin -| | ... | ${dut_node} | ${acl_name_icmp} | ${acl_settings} -| | And Honeycomb Assigns plugin-acl Chain To Interface -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_icmp} | ingress -| | Then Send ICMP packet with type and code and verify received packet -| | ... | ${tg_node} -| | ... | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | ${icmp_type} | ${icmp_code} -| | Then Send ICMP packet with type and code and verify received packet -| | ... | ${tg_node} -| | ... | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | ${classify_type} | ${icmp_code} -| | And Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Send ICMP packet with type and code and verify received packet -| | ... | ${tg_node} -| | ... | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | ${classify_type} | ${classify_code} - -| TC07: ACL ICMPv6 packet filtering - bridged -| | [Documentation] -| | ... | [Top] TG=DUT1=TG. -| | ... | [Enc] Eth-IPv6-ICMP. -| | ... | [Cfg] (Using Honeycomb API) On DUT1 bridge both interfaces to TG\ -| | ... | and configure a ICMPv6 protocol filtering by ICMPv6 type and code. -| | ... | [Ver] Send ICMPv6 packets from one TG interface\ -| | ... | to the other, using different codes and types. Receive all packets\ -| | ... | except those with the filtered type and code. -| | ... -| | [Teardown] | Bridged ACL test teardown -| | ... -| | Given Setup interfaces and bridge domain for plugin-acl test -| | ... | icmpv6 | ${acl_name_icmpv6} -| | When Honeycomb Creates ACL Chain Through ACL plugin -| | ... | ${dut_node} | ${acl_name_icmpv6} | ${acl_settings} -| | And Honeycomb Assigns plugin-acl Chain To Interface -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_icmpv6} | ingress -| | Then Send ICMP packet with type and code and verify received packet -| | ... | ${tg_node} -| | ... | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | ${icmp_type} | ${icmp_code} -| | Then Send ICMP packet with type and code and verify received packet -| | ... | ${tg_node} -| | ... | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | ${classify_type} | ${icmp_code} -| | And Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Send ICMP packet with type and code and verify received packet -| | ... | ${tg_node} -| | ... | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | ${classify_type} | ${classify_code} - -| TC08: ACL reflexive IPv4 filtering through plugin-acl node - bridged -| | [Documentation] -| | ... | [Top] TG=DUT1=TG. -| | ... | [Enc] Eth-IPv4-TCP. -| | ... | [Cfg] (Using Honeycomb API) On DUT1 bridge both interfaces to TG,\ -| | ... | configure a "drop all" ACL on ingress and reflexive ACL on egress. -| | ... | [Ver] Send a simple TCP packet to VPP interface 1 and do not receive\ -| | ... | it back. Then send the packet with reversed src/dst IP address\ -| | ... | to VPP interface 2 and receive it from interface 1(this should create\ -| | ... | a reflexive "permit" rule) Finally, send the original packet again\ -| | ... | and receive it from interface 2. -| | ... -| | [Teardown] | Bridged ACL test teardown -| | ... -| | Given Setup Interfaces And Bridge Domain For plugin-acl Test -| | ... | reflex | ${acl_name_reflex} -| | When Honeycomb Creates ACL Chain Through ACL plugin -| | ... | ${dut_node} | ${acl_name_reflex} | ${acl_settings} -| | And Honeycomb Assigns plugin-acl Chain To Interface -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_reflex} | egress -| | And Import Variables | resources/test_data/honeycomb/plugin_acl.py -| | ... | block_all | block_all -| | When Honeycomb Creates ACL Chain Through ACL plugin -| | ... | ${dut_node} | block_all | ${acl_settings} -| | And Honeycomb Assigns plugin-acl Chain To Interface -| | ... | ${dut_node} | ${dut_to_tg_if1} | block_all | ingress -| | And Run Keyword And Expect Error | TCP/UDP Rx timeout -| | ... | Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${classify_src} | ${classify_dst} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | TCP | ${src_port} | ${dst_port} -| | And Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${classify_dst} | ${classify_src} -| | ... | ${tg_to_dut_if2} | ${tg_to_dut_if2_mac} -| | ... | ${tg_to_dut_if1} | ${dut_to_tg_if2_mac} -| | ... | TCP | ${dst_port} | ${src_port} -| | And Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${classify_src} | ${classify_dst} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | TCP | ${src_port} | ${dst_port} - -# Routing section -# =============== - -| TC09: ACL IPv4 filtering through plugin-acl node - routed -| | [Documentation] -| | ... | [Top] TG=DUT1=TG. -| | ... | [Enc] Eth-IPv4-TCP. -| | ... | [Cfg] (Using Honeycomb API) On DUT1 set IPv4 addresses on both\ -| | ... | interfaces to TG, add ARP entry and routes, and configure L3 IPv4 ACL\ -| | ... | on ingress interface with src/dst IP and protocol. -| | ... | [Ver] Send simple TCP and UDP packets from one TG interface\ -| | ... | to the other, using different IPv4 IPs. Receive all packets except\ -| | ... | those with IPs in the filtered ranges and UDP protocol payload. -| | ... -| | [Teardown] | Routed ACL test teardown - ipv4 -| | ... -| | Given Setup Interface IPs And Routes For IPv4 plugin-acl Test -| | ... | l3_ip4 | ${acl_name_l3_ip4} -| | When Honeycomb Creates ACL Chain Through ACL plugin -| | ... | ${dut_node} | ${acl_name_l3_ip4} | ${acl_settings} -| | And Honeycomb Assigns plugin-acl Chain To Interface -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_l3_ip4} | ingress -| | Then Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | UDP | ${src_port} | ${dst_port} -| | And Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${classify_src} | ${classify_dst} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | TCP | ${src_port} | ${dst_port} -| | And Run Keyword And Expect Error | TCP/UDP Rx timeout -| | ... | Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${classify_src} | ${classify_dst} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | UDP | ${src_port} | ${dst_port} - -| TC10: ACL IPv6 filtering through plugin-acl node - routed -| | [Documentation] -| | ... | [Top] TG=DUT1=TG. -| | ... | [Enc] Eth-IPv6-TCP. -| | ... | [Cfg] (Using Honeycomb API) On DUT1 set IPv6 addresses on both\ -| | ... | interfaces to TG, add IP neighbor entry and routes, and configure\ -| | ... | L3 IPv6 ACL on ingress interface with src/dst IP and next-header. -| | ... | [Ver] Send simple TCP and UDP packets from one TG interface\ -| | ... | to the other, using different IPv6 IPs. Receive all packets except\ -| | ... | those with IPs in the filtered ranges and UDP protocol payload. -| | ... -| | [Teardown] | Routed ACL test teardown - ipv6 -| | ... -| | Given Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Import Variables | resources/test_data/honeycomb/plugin_acl.py -| | ... | L3_IP6 | ${acl_name_l3_ip6} -| | And Honeycomb configures interface state -| | ... | ${dut_node} | ${dut_to_tg_if1} | up -| | And Honeycomb configures interface state -| | ... | ${dut_node} | ${dut_to_tg_if2} | up -| | And Honeycomb sets interface IPv6 address | ${dut_node} -| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip} | ${prefix_length} -| | And Honeycomb sets interface IPv6 address | ${dut_node} -| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip} | ${prefix_length} -| | And VPP RA suppress link layer | ${dut_node} | ${dut_to_tg_if2} -| | And Honeycomb adds interface IPv6 neighbor -| | ... | ${node} | ${dut_to_tg_if2} | ${gateway} | ${tg_to_dut_if2_mac} -| | And VPP Route Add | ${node} | ${dst_net} | ${prefix_length} -| | ... | ${gateway} | interface=${dut_to_tg_if2} | use_sw_index=False -| | And VPP Route Add | ${node} | ${classify_dst_net} | ${prefix_length} -| | ... | ${gateway} | interface=${dut_to_tg_if2} | use_sw_index=False -| | When Honeycomb Creates ACL Chain Through ACL plugin -| | ... | ${dut_node} | ${acl_name_l3_ip6} | ${acl_settings} -| | And Honeycomb Assigns plugin-acl Chain To Interface -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_l3_ip6} | ingress -| | Then Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | UDP | ${src_port} | ${dst_port} -| | And Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${classify_src} | ${classify_dst} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | TCP | ${src_port} | ${dst_port} -| | And Run Keyword And Expect Error | TCP/UDP Rx timeout -| | ... | Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${classify_src} | ${classify_dst} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | UDP | ${src_port} | ${dst_port} - -| TC11: ACL port filtering through plugin-acl node - routed -| | [Documentation] -| | ... | [Top] TG=DUT1=TG. -| | ... | [Enc] Eth-IPv4-TCP. -| | ... | [Cfg] (Using Honeycomb API) On DUT1 set IPv4 addresses on both\ -| | ... | interfaces to TG, add ARP entry and routes, and configure L4 port ACL\ -| | ... | on ingress interface with src/dst port ranges. -| | ... | [Ver] Send simple TCP and UDP packets from one TG interface\ -| | ... | to the other, using different ports. Receive all packets except\ -| | ... | those with ports in the filtered ranges. -| | ... -| | [Teardown] | Routed ACL test teardown - ipv4 -| | ... -| | Given Setup Interface IPs And Routes For IPv4 plugin-acl Test -| | ... | L4 | ${acl_name_l4} -| | When Honeycomb Creates ACL Chain Through ACL plugin -| | ... | ${dut_node} | ${acl_name_l4} | ${acl_settings} -| | And Honeycomb Assigns plugin-acl Chain To Interface -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_l4} | ingress -| | Then Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | TCP | ${src_port} | ${dst_port} -| | And Run Keyword And Expect Error | TCP/UDP Rx timeout -| | ... | Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | TCP | ${classify_src} | ${classify_dst} -| | And Run Keyword And Expect Error | TCP/UDP Rx timeout -| | ... | Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | TCP | ${classify_src+5} | ${classify_dst+5} - -| TC12: ACL filtering with IPv4 address and TCP port in one rule - routed -| | [Documentation] -| | ... | [Top] TG=DUT1=TG. -| | ... | [Enc] Eth-IPv4-TCP. -| | ... | [Cfg] (Using Honeycomb API) On DUT1 set IPv4 addresses on both\ -| | ... | interfaces to TG, add ARP entry and routes and configure a mixed -| | ... | rule with src/dst IP, TCP protocol and port ranges. -| | ... | [Ver] Send simple TCP packets from one TG interface to the other,\ -| | ... | using IPs and ports. Receive all packets except those with\ -| | ... | both IPs and ports in the filtered ranges. -| | ... -| | [Teardown] | Routed ACL test teardown - ipv4 -| | ... -| | Given Setup Interface IPs And Routes For IPv4 plugin-acl Test -| | ... | mixed | ${acl_name_mixed} -| | When Honeycomb Creates ACL Chain Through ACL plugin -| | ... | ${dut_node} | ${acl_name_mixed} | ${acl_settings} -| | And Honeycomb Assigns plugin-acl Chain To Interface -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_mixed} | ingress -| | Then Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | TCP | ${src_port} | ${dst_port} -| | Then Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${classify_src_ip} | ${classify_dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | TCP | ${src_port} | ${dst_port} -| | And Run Keyword And Expect Error | TCP/UDP Rx timeout -| | ... | Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${classify_src_ip} | ${classify_dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dst_mac} -| | ... | TCP | ${classify_src_port} | ${classify_dst_port} - -| TC13: ACL ICMP packet filtering - routed -| | [Documentation] -| | ... | [Top] TG=DUT1=TG. -| | ... | [Enc] Eth-IPv4-TCP. -| | ... | [Cfg] (Using Honeycomb API) On DUT1 set IPv4 addresses on both\ -| | ... | interfaces to TG, add ARP entry and routes, and configure ICMP ACL\ -| | ... | on ingress interface with ICMP type and code. -| | ... | [Ver] Send ICMP packets from one TG interface\ -| | ... | to the other, using different codes and types. Receive all packets\ -| | ... | except those with the filtered type and code. -| | ... -| | [Teardown] | Routed ACL test teardown - ipv4 -| | ... -| | Given Setup Interface IPs And Routes For IPv4 plugin-acl Test -| | ... | icmp | ${acl_name_icmp} -| | When Honeycomb Creates ACL Chain Through ACL plugin -| | ... | ${dut_node} | ${acl_name_icmp} | ${acl_settings} -| | And Honeycomb Assigns plugin-acl Chain To Interface -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_icmp} | ingress -| | Then Send ICMP packet with type and code and verify received packet -| | ... | ${tg_node} -| | ... | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | ${icmp_type} | ${icmp_code} -| | Then Send ICMP packet with type and code and verify received packet -| | ... | ${tg_node} -| | ... | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | ${classify_type} | ${icmp_code} -| | And Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Send ICMP packet with type and code and verify received packet -| | ... | ${tg_node} -| | ... | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | ${classify_type} | ${classify_code} - -| TC14: ACL ICMPv6 packet filtering - routed -| | [Documentation] -| | ... | [Top] TG=DUT1=TG. -| | ... | [Enc] Eth-IPv4-TCP. -| | ... | [Cfg] (Using Honeycomb API) On DUT1 set IPv6 addresses on both\ -| | ... | interfaces to TG, add ARP entry and routes, and configure ICMP ACL\ -| | ... | on ingress interface with ICMPv6 type and code. -| | ... | [Ver] Send ICMPv6 packets from one TG interface\ -| | ... | to the other, using different codes and types. Receive all packets\ -| | ... | except those with the filtered type and code. -| | ... -| | [Teardown] | Routed ACL test teardown - ipv6 -| | ... -| | Given Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Import Variables | resources/test_data/honeycomb/plugin_acl.py -| | ... | icmpv6 | ${acl_name_icmpv6} -| | And Honeycomb configures interface state -| | ... | ${dut_node} | ${dut_to_tg_if1} | up -| | And Honeycomb configures interface state -| | ... | ${dut_node} | ${dut_to_tg_if2} | up -| | And Honeycomb sets interface IPv6 address | ${dut_node} -| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip} | ${prefix_length} -| | And Honeycomb sets interface IPv6 address | ${dut_node} -| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip} | ${prefix_length} -| | And Honeycomb adds interface IPv6 neighbor -| | ... | ${node} | ${dut_to_tg_if2} | ${gateway} | ${tg_to_dut_if2_mac} -| | And VPP RA suppress link layer | ${dut_node} | ${dut_to_tg_if2} -| | And VPP Route Add | ${node} | ${dst_net} | ${prefix_length} -| | ... | ${gateway} | interface=${dut_to_tg_if2} | use_sw_index=False -| | And VPP Route Add | ${node} | ${classify_dst_net} | ${prefix_length} -| | ... | ${gateway} | interface=${dut_to_tg_if2} | use_sw_index=False -| | When Honeycomb Creates ACL Chain Through ACL plugin -| | ... | ${dut_node} | ${acl_name_icmpv6} | ${acl_settings} -| | And Honeycomb Assigns plugin-acl Chain To Interface -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_icmpv6} | ingress -| | Then Send ICMP packet with type and code and verify received packet -| | ... | ${tg_node} -| | ... | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | ${icmp_type} | ${icmp_code} -| | Then Send ICMP packet with type and code and verify received packet -| | ... | ${tg_node} -| | ... | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | ${classify_type} | ${icmp_code} -| | And Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Send ICMP packet with type and code and verify received packet -| | ... | ${tg_node} -| | ... | ${src_ip} | ${dst_ip} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | ${classify_type} | ${classify_code} - -| TC15: ACL reflexive IPv4 filtering through plugin-acl node - routed -| | [Documentation] -| | ... | [Top] TG=DUT1=TG. -| | ... | [Enc] Eth-IPv4-TCP. -| | ... | [Cfg] (Using Honeycomb API) On DUT1 set IPv4 addresses on both\ -| | ... | interfaces to TG, add ARP entries and routes,\ -| | ... | configure a "drop all" ACL on ingress and reflexive ACL on egress. -| | ... | [Ver] Send a simple TCP packet to VPP interface 1 and do not receive\ -| | ... | it back. Then send the packet with reversed src/dst IP address\ -| | ... | to VPP interface 2 and receive it from interface 1(this should create\ -| | ... | a reflexive "permit" rule) Finally, send the original packet again\ -| | ... | and receive it from interface 2. -| | ... -| | [Teardown] | Routed ACL test teardown - ipv4 -| | ... -| | Given Setup Interface IPs And Routes For IPv4 plugin-acl Test -| | ... | reflex | ${acl_name_reflex} -| | And Add ARP on DUT -| | ... | ${node} | ${dut_to_tg_if1} | ${gateway2} | ${tg_to_dut_if1_mac} -| | And VPP Route Add -| | ... | ${node} | ${src_net} | ${prefix_length} | ${gateway2} -| | ... | interface=${dut_to_tg_if1} | use_sw_index=False -| | And VPP Route Add -| | ... | ${node} | ${classify_src_net} | ${prefix_length} | ${gateway2} -| | ... | interface=${dut_to_tg_if1} | use_sw_index=False -| | When Honeycomb Creates ACL Chain Through ACL plugin -| | ... | ${dut_node} | ${acl_name_reflex} | ${acl_settings} -| | And Honeycomb Assigns plugin-acl Chain To Interface -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_reflex} | egress -| | And Import Variables | resources/test_data/honeycomb/plugin_acl.py -| | ... | block_all | block_all -| | When Honeycomb Creates ACL Chain Through ACL plugin -| | ... | ${dut_node} | block_all | ${acl_settings} -| | And Honeycomb Assigns plugin-acl Chain To Interface -| | ... | ${dut_node} | ${dut_to_tg_if1} | block_all | ingress -| | And Run Keyword And Expect Error | TCP/UDP Rx timeout -| | ... | Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${classify_src} | ${classify_dst} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | TCP | ${src_port} | ${dst_port} -| | And Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${classify_dst} | ${classify_src} -| | ... | ${tg_to_dut_if2} | ${tg_to_dut_if2_mac} -| | ... | ${tg_to_dut_if1} | ${dut_to_tg_if2_mac} -| | ... | TCP | ${dst_port} | ${src_port} -| | And Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${classify_src} | ${classify_dst} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} -| | ... | TCP | ${src_port} | ${dst_port} - -*** Keywords *** -| Setup interface IPs and routes for IPv4 plugin-acl test -| | [Documentation] | Import test variables, set interfaces up, -| | ... | configure IPv4 addresses, add neighbor entry and routes. -| | ... -| | [Arguments] | ${test_data_id} | ${acl_name} -| | ... -| | Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | Import Variables | resources/test_data/honeycomb/plugin_acl.py -| | ... | ${test_data_id} | ${acl_name} -| | Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if1} | up -| | Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if2} | up -| | Honeycomb sets interface IPv4 address with prefix | ${dut_node} -| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip} | ${prefix_length} -| | Honeycomb sets interface IPv4 address with prefix | ${dut_node} -| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip} | ${prefix_length} -| | And Honeycomb adds interface IPv4 neighbor -| | ... | ${node} | ${dut_to_tg_if2} | ${gateway} | ${tg_to_dut_if2_mac} -| | VPP Route Add -| | ... | ${node} | ${dst_net} | ${prefix_length} | ${gateway} -| | ... | interface=${dut_to_tg_if2} | use_sw_index=False -| | VPP Route Add -| | ... | ${node} | ${classify_dst_net} | ${prefix_length} | ${gateway} -| | ... | interface=${dut_to_tg_if2} | use_sw_index=False - -| Setup interfaces and bridge domain for plugin-acl test -| | [Documentation] | Import test variables, set interfaces up and bridge them. -| | ... -| | [Arguments] | ${test_data_id} | ${acl_name} -| | ... -| | Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | Import Variables | resources/test_data/honeycomb/plugin_acl.py -| | ... | ${test_data_id} | ${acl_name} -| | Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if1} | up -| | Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if2} | up -| | Honeycomb Creates first L2 Bridge Domain -| | ... | ${dut_node} | ${bd_name} | ${bd_settings} -| | Honeycomb Adds Interfaces To Bridge Domain -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${dut_to_tg_if2} -| | ... | ${bd_name} | ${bd_if_settings} - -| Bridged ACL test teardown -| | [Documentation] | Log packet trace and ACL settings, -| | ... | then clean up bridge domains. -| | ... -| | Show Packet Trace on All DUTs | ${nodes} -| | Read plugin-ACL configuration from VAT | ${node} -| | Clear plugin-ACL configuration | ${node} | ${dut_to_tg_if1} -| | Honeycomb Removes All Bridge Domains -| | ... | ${node} | ${dut_to_tg_if1} | ${dut_to_tg_if2} - -| Routed ACL test teardown - ipv4 -| | [Documentation] | Log packet trace and ACL settings, -| | ... | then clean up IPv4 addresses and neighbors. -| | ... -| | Show Packet Trace on All DUTs | ${nodes} -| | Read plugin-ACL configuration from VAT | ${node} -| | Clear plugin-ACL configuration | ${node} | ${dut_to_tg_if1} -| | Honeycomb removes interface IPv4 addresses | ${node} | ${dut_to_tg_if1} -| | Honeycomb clears all interface IPv4 neighbors | ${node} | ${dut_to_tg_if1} - -| Routed ACL test teardown - ipv6 -| | [Documentation] | Log packet trace and ACL settings, -| | ... | then clean up IPv6 addresses and neighbors. -| | ... -| | Show Packet Trace on All DUTs | ${nodes} -| | Clear plugin-ACL configuration | ${node} | ${dut_to_tg_if1} -| | Read plugin-ACL configuration from VAT | ${node} -| | Honeycomb removes interface IPv6 addresses | ${node} | ${dut_to_tg_if1} -| | Honeycomb clears all interface IPv6 neighbors | ${node} | ${dut_to_tg_if1} |