diff options
Diffstat (limited to 'tests/func/honeycomb/mgmt-cfg-policer-apihc-func.robot')
| -rw-r--r-- | tests/func/honeycomb/mgmt-cfg-policer-apihc-func.robot | 128 |
1 files changed, 128 insertions, 0 deletions
diff --git a/tests/func/honeycomb/mgmt-cfg-policer-apihc-func.robot b/tests/func/honeycomb/mgmt-cfg-policer-apihc-func.robot new file mode 100644 index 0000000000..f7d8e9912b --- /dev/null +++ b/tests/func/honeycomb/mgmt-cfg-policer-apihc-func.robot @@ -0,0 +1,128 @@ +# Copyright (c) 2017 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Variables *** +| ${interface}= | ${node['interfaces']['port1']['name']} +| ${tg_to_dut_if1_ip}= | 192.168.122.1 +| ${dut_to_tg_if1_ip}= | 192.168.122.2 +| ${dut_to_tg_if2_ip}= | 192.168.123.1 +| ${tg_to_dut_if2_ip}= | 192.168.123.2 +| ${prefix_length}= | ${24} +| ${dscp_number}= | ${20} + +*** Settings *** +| Resource | resources/libraries/robot/default.robot +| Resource | resources/libraries/robot/honeycomb/honeycomb.robot +| Resource | resources/libraries/robot/honeycomb/interfaces.robot +| Resource | resources/libraries/robot/honeycomb/policer.robot +| Resource | resources/libraries/robot/honeycomb/access_control_lists.robot +| Resource | resources/libraries/robot/testing_path.robot +| Library | resources.libraries.python.Trace +| Variables | resources/test_data/honeycomb/policer_variables.py +| Suite Teardown +| ... | Run Keyword If Any Tests Failed +| ... | Restart Honeycomb and VPP | ${node} +| Force Tags | honeycomb_sanity | honeycomb_odl +| Documentation | *Honeycomb Policer management test suite.* + +*** Test Cases *** +| TC01: Honeycomb can configure Policer +| | [Documentation] | Checks if Honeycomb can configure Policer. +| | Given Policer configuration from Honeycomb should be empty | ${node} +| | When Honeycomb configures Policer | ${node} | ${policer_data} +| | Then Policer configuration from Honeycomb should be | ${node} +| | ... | ${policer_data_oper} + +| TC02: Honeycomb can disable Policer +| | [Documentation] | Checks if Honeycomb can disable Policer. +| | Given Policer configuration from Honeycomb should be | ${node} +| | ... | ${policer_data_oper} +| | When Honeycomb removes Policer configuration | ${node} +| | Then Policer configuration from Honeycomb should be empty | ${node} + +| TC03: Honeycomb can configure Policer with increased values of CIR (900kbps) +| | [Documentation] | Checks if Honeycomb can configure Policer\ +| | ... | with increased values of CIR. +| | [Teardown] | Policer test teardown | ${node} +| | Given Policer configuration from Honeycomb should be empty | ${node} +| | When Honeycomb configures Policer | ${node} | ${policer_data_2} +| | Then Policer configuration from Honeycomb should be | ${node} +| | ... | ${policer_data_oper_2} + +| TC04: Honeycomb can configure Packets-Per-Second Based Policer +| | [Documentation] | Checks if Honeycomb can configure Policer\ +| | ... | based on rate-type measured in pps. +| | [Teardown] | Policer test teardown | ${node} +| | Given Policer configuration from Honeycomb should be empty | ${node} +| | When Honeycomb configures Policer | ${node} | ${policer_data_3} +| | Then Policer configuration from Honeycomb should be | ${node} +| | ... | ${policer_data_oper_3} + +| TC05: Configure Policer on Interface +| | [Documentation] | Honeycomb can configure Policer\ +| | ... | on a given interface. +| | [Teardown] | Run Keywords +| | ... | Honeycomb disables Policer on interface | ${node} | ${interface} | AND +| | ... | Honeycomb removes ACL session +| | ... | ${node} | ${acl_tables['hc_acl_table']['name']} +| | ... | ${acl_tables['hc_acl_session']['match']} | AND +| | ... | Honeycomb removes ACL table | ${node} +| | ... | ${acl_tables['hc_acl_table']['name']} | AND +| | ... | Policer test teardown | ${node} +| | Given Honeycomb configures Policer | ${node} | ${policer_data} +| | And ACL table from Honeycomb should not exist +| | ... | ${node} | ${acl_tables['hc_acl_table']['name']} +| | When Honeycomb creates ACL table +| | ... | ${node} | ${acl_tables['hc_acl_table']} +| | And Honeycomb adds ACL session +| | ... | ${node} | ${acl_tables['hc_acl_table']['name']} +| | ... | ${acl_tables['hc_acl_session']} +| | Then Honeycomb enables policer on interface +| | ... | ${node} | ${interface} | ${acl_tables['hc_acl_table']['name']} + +| TC06: VPP policer 2R3C Color-aware marks packet +| | [Documentation] +| | ... | [Top] TG=DUT1. +| | ... | [Ref] RFC2474, RFC2698. +| | ... | [Cfg] Configure 2R3C color-aware policer on DUT1 on the first\ +| | ... | interface. +| | ... | [Ver] TG sends IPv4 TCP packet on the first link to DUT1.\ +| | ... | Packet on DUT1 is marked with DSCP tag. Verifies if DUT1 sends\ +| | ... | correct IPv4 TCP packet with correct DSCP on the second link to TG. +| | [Teardown] | Show Packet Trace on All DUTs | ${nodes} +| | Given Path for 2-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} +| | And Honeycomb configures Policer | ${dut_node} | ${policer_data_3} +| | And ACL table from Honeycomb should not exist +| | ... | ${dut_node} | ${acl_tables['hc_acl_table']['name']} +| | When Honeycomb creates ACL table +| | ... | ${dut_node} | ${acl_tables['hc_acl_table']} +| | And Honeycomb adds ACL session +| | ... | ${dut_node} | ${acl_tables['hc_acl_table']['name']} +| | ... | ${acl_tables['hc_acl_session']} +| | And Honeycomb enables policer on interface +| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_tables['hc_acl_table']['name']} +| | And Honeycomb sets interface state | ${dut_node} | ${dut_to_tg_if1} | up +| | And Honeycomb sets interface state | ${dut_node} | ${dut_to_tg_if2} | up +| | And Honeycomb sets interface ipv4 address with prefix | ${dut_node} +| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip} | ${prefix_length} +| | And Honeycomb sets interface ipv4 address with prefix | ${dut_node} +| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip} | ${prefix_length} +| | And Honeycomb adds interface ipv4 neighbor +| | ... | ${dut_node} | ${dut_to_tg_if2} | ${tg_to_dut_if2_ip} +| | ... | ${tg_to_dut_if2_mac} +| | And interfaceCLI.VPP Node Interfaces Ready Wait | ${dut_node} +| | Then Honeycomb Send Packet and Verify Marking | ${tg_node} +| | ... | ${tg_to_dut_if1} +| | ... | ${tg_to_dut_if2} | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_mac} +| | ... | ${tg_to_dut_if1_ip} | ${tg_to_dut_if2_ip} | ${dscp_number} |