aboutsummaryrefslogtreecommitdiffstats
path: root/tests/func/honeycomb
diff options
context:
space:
mode:
Diffstat (limited to 'tests/func/honeycomb')
-rw-r--r--tests/func/honeycomb/mgmt-cfg-acl-apihc-apivat-func.robot12
-rw-r--r--tests/func/honeycomb/mgmt-cfg-dhcp-apihc-apivat-func.robot22
-rw-r--r--tests/func/honeycomb/mgmt-cfg-int-apihcnc-func.robot8
-rw-r--r--tests/func/honeycomb/mgmt-cfg-int-subint-apihc-apivat-func.robot16
-rw-r--r--tests/func/honeycomb/mgmt-cfg-intip4-intip6-apihc-apivat-func.robot72
-rw-r--r--tests/func/honeycomb/mgmt-cfg-l2fib-apihc-apivat-func.robot4
-rw-r--r--tests/func/honeycomb/mgmt-cfg-lisp-apihc-apivat-func.robot96
-rw-r--r--tests/func/honeycomb/mgmt-cfg-pluginacl-apihc-apivat-func.robot136
-rw-r--r--tests/func/honeycomb/mgmt-cfg-policer-apihc-func.robot20
-rw-r--r--tests/func/honeycomb/mgmt-cfg-proxyarp-apihc-func.robot10
-rw-r--r--tests/func/honeycomb/mgmt-cfg-proxynd6-apihc-func.robot20
-rw-r--r--tests/func/honeycomb/mgmt-cfg-routing-apihc-apivat-func.robot52
-rw-r--r--tests/func/honeycomb/mgmt-cfg-slaac-apihc-func.robot18
-rw-r--r--tests/func/honeycomb/mgmt-cfg-spanrx-apihc-apivat-func.robot38
-rw-r--r--tests/func/honeycomb/mgmt-cfg-vxlan-apihc-apivat-func.robot2
-rw-r--r--tests/func/honeycomb/mgmt-notif-apihcnc-func.robot10
-rw-r--r--tests/func/honeycomb/mgmt-statepersist-apihc-func.robot20
17 files changed, 278 insertions, 278 deletions
diff --git a/tests/func/honeycomb/mgmt-cfg-acl-apihc-apivat-func.robot b/tests/func/honeycomb/mgmt-cfg-acl-apihc-apivat-func.robot
index 7792fb3fdd..9d94d3d024 100644
--- a/tests/func/honeycomb/mgmt-cfg-acl-apihc-apivat-func.robot
+++ b/tests/func/honeycomb/mgmt-cfg-acl-apihc-apivat-func.robot
@@ -119,21 +119,21 @@
| | ... | ${node} | ${table_index} | ${session_index} | ${vat_acl_session}
| | When Honeycomb enables ACL on interface
| | ... | ${node} | ${interface} | ${hc_acl_table['name']}
-| | Then Interface ACL settings from Honeycomb should be
+| | Then Interface ACL configuration from Honeycomb should be
| | ... | ${node} | ${interface} | ${hc_acl_table['name']}
-| | And Interface ACL settings from VAT should be
+| | And Interface ACL configuration from VAT should be
| | ... | ${node} | ${interface} | ${table_index}
| TC08: Honeycomb disables ACL on interface
| | [Documentation] | Check if Honeycomb API can disable ACL on an interface.
-| | Given Interface ACL settings from Honeycomb should be
+| | Given Interface ACL configuration from Honeycomb should be
| | ... | ${node} | ${interface} | ${hc_acl_table['name']}
-| | And Interface ACL settings from VAT should be
+| | And Interface ACL configuration from VAT should be
| | ... | ${node} | ${interface} | ${table_index}
| | When Honeycomb disables ACL on interface | ${node} | ${interface}
-| | Then Interface ACL settings from Honeycomb should be empty
+| | Then Interface ACL configuration from Honeycomb should be empty
| | ... | ${node} | ${interface}
-| | And Interface ACL settings from VAT should be empty
+| | And Interface ACL configuration from VAT should be empty
| | ... | ${node} | ${interface}
| TC09: Honeycomb can remove one out of multiple ACL tables
diff --git a/tests/func/honeycomb/mgmt-cfg-dhcp-apihc-apivat-func.robot b/tests/func/honeycomb/mgmt-cfg-dhcp-apihc-apivat-func.robot
index ba39c02402..5b6656958d 100644
--- a/tests/func/honeycomb/mgmt-cfg-dhcp-apihc-apivat-func.robot
+++ b/tests/func/honeycomb/mgmt-cfg-dhcp-apihc-apivat-func.robot
@@ -45,7 +45,7 @@
| | Then DHCP relay configuration from Honeycomb should contain
| | ... | ${node} | ${relay1_oper}
| | When DHCP relay test setup
-| | Then Send DHCP Messages | ${tg_node} | ${tg_to_dut_if1} | ${tg_to_dut_if2}
+| | Then Send DHCP messages and check answer | ${tg_node} | ${tg_to_dut_if1} | ${tg_to_dut_if2}
| | ... | ${dhcp_server1_ip} | ${tg_to_dut_if2_mac} | ${client_ip}
| | ... | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_ip}
@@ -88,13 +88,13 @@
*** Keywords ***
| DHCP relay test setup
-| | Path for 2-node testing is set
+| | Configure path in 2-node circular topology
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
-| | Honeycomb sets interface state | ${dut_node} | ${dut_to_tg_if1} | up
-| | Honeycomb sets interface state | ${dut_node} | ${dut_to_tg_if2} | up
-| | Honeycomb sets interface ipv4 address with prefix | ${dut_node}
+| | Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if1} | up
+| | Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if2} | up
+| | Honeycomb sets interface IPv4 address with prefix | ${dut_node}
| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip} | ${prefix_length}
-| | Honeycomb sets interface ipv4 address with prefix | ${dut_node}
+| | Honeycomb sets interface IPv4 address with prefix | ${dut_node}
| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip} | ${prefix_length}
| | Add ARP on DUT
| | ... | ${dut_node} | ${dut_to_tg_if2} | ${dhcp_server1_ip} | ${tg_to_dut_if2_mac}
@@ -104,14 +104,14 @@
| | ... | ${FALSE} | ${NONE}
| DHCP relay test setup IPv6
-| | Path for 2-node testing is set
+| | Configure path in 2-node circular topology
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
-| | Honeycomb sets interface state | ${dut_node} | ${dut_to_tg_if1} | up
-| | Honeycomb sets interface state | ${dut_node} | ${dut_to_tg_if2} | up
+| | Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if1} | up
+| | Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if2} | up
| | And Vpp All Ra Suppress Link Layer | ${nodes}
-| | Honeycomb sets interface ipv6 address | ${dut_node}
+| | Honeycomb sets interface IPv6 address | ${dut_node}
| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip6} | ${prefix_length_v6}
-| | Honeycomb sets interface ipv6 address | ${dut_node}
+| | Honeycomb sets interface IPv6 address | ${dut_node}
| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip6} | ${prefix_length_v6}
| | And Add IP Neighbor | ${dut_node} | ${dut_to_tg_if2} | ${dhcp_server_ip6}
| | ... | ${tg_to_dut_if2_mac}
diff --git a/tests/func/honeycomb/mgmt-cfg-int-apihcnc-func.robot b/tests/func/honeycomb/mgmt-cfg-int-apihcnc-func.robot
index 4fe9dde40c..c6ae380f9b 100644
--- a/tests/func/honeycomb/mgmt-cfg-int-apihcnc-func.robot
+++ b/tests/func/honeycomb/mgmt-cfg-int-apihcnc-func.robot
@@ -34,7 +34,7 @@
| TC01: Honeycomb can create and delete interfaces
| | [Documentation] | Repeatedly create and delete an interface through Netconf\
| | ... | and check the reply for any errors.
-| | Given Netconf session is established | ${node}
+| | Given Netconf session should be established | ${node}
| | And Honeycomb creates first L2 bridge domain
| | ... | ${node} | bd_netconf | ${bd_settings}
| | :FOR | ${index} | IN RANGE | 20
@@ -44,7 +44,7 @@
| TC02: Transaction revert test case 1
| | [Documentation] | Configure two conflicting VxLAN tunnels, then verify\
| | ... | that neither tunnel exists.
-| | Given Netconf session is established | ${node}
+| | Given Netconf session should be established | ${node}
| | ${if_data}= | And InterfaceAPI.Get all interfaces oper data | ${node}
| | When Error trigger is sent | ${trigger_revert1}
| | ${if_data_new}= | And InterfaceAPI.Get all interfaces oper data | ${node}
@@ -53,7 +53,7 @@
| TC03: Transaction revert test case 2
| | [Documentation] | Configure two conflicting TAP interfaces, then verify\
| | ... | that neither interface exists.
-| | Given Netconf session is established | ${node}
+| | Given Netconf session should be established | ${node}
| | ${if_data}= | And InterfaceAPI.Get all interfaces oper data | ${node}
| | When Error trigger is sent | ${trigger_revert1}
| | ${if_data_new}= | And InterfaceAPI.Get all interfaces oper data | ${node}
@@ -61,7 +61,7 @@
| TC04: Vlan subinterface creation
| | [Documentation] | Configure a Vlan sub-interface under a physical interface.
-| | Given Netconf session is established | ${node}
+| | Given Netconf session should be established | ${node}
| | When Error Trigger Is Sent
| | ... | ${trigger_vlan} | interface=${interface}
| | Then Replies should not contain RPC errors
diff --git a/tests/func/honeycomb/mgmt-cfg-int-subint-apihc-apivat-func.robot b/tests/func/honeycomb/mgmt-cfg-int-subint-apihc-apivat-func.robot
index c7e0737a6b..803cfa0932 100644
--- a/tests/func/honeycomb/mgmt-cfg-int-subint-apihc-apivat-func.robot
+++ b/tests/func/honeycomb/mgmt-cfg-int-subint-apihc-apivat-func.robot
@@ -36,7 +36,7 @@
| TC01: Honeycomb creates sub-interface
| | [Documentation] | Check if Honeycomb creates a sub-interface.
| | ...
-| | Given Honeycomb sets interface state | ${node} | ${super_if} | down
+| | Given Honeycomb configures interface state | ${node} | ${super_if} | down
| | And sub-interface Operational Data From Honeycomb Should Be empty
| | ... | ${node} | ${super_if} | ${sub_if_id}
| | And interface Operational Data From VAT Should Be empty
@@ -62,7 +62,7 @@
| | ... | ${node} | ${super_if} | ${sub_if_id} | down | down
| | Sub-interface state from VAT should be
| | ... | ${node} | ${sub_if_name} | down | down
-| | When Honeycomb sets interface state
+| | When Honeycomb configures interface state
| | ... | ${node} | ${super_if} | up
| | Then interface state from Honeycomb should be
| | ... | ${node} | ${super_if} | up
@@ -112,7 +112,7 @@
| | ... | ${node} | ${super_if} | up
| | And interface state from VAT should be
| | ... | ${node} | ${super_if} | up
-| | When Honeycomb sets interface state
+| | When Honeycomb configures interface state
| | ... | ${node} | ${super_if} | down
| | Then interface state from Honeycomb should be
| | ... | ${node} | ${super_if} | down
@@ -387,7 +387,7 @@
| TC18: Honeycomb modifies sub-interface exact tag match
| | [Documentation] | Check if Honeycomb can modify a sub-interface with exact\
| | ... | tag match.
-| | Given Honeycomb sets interface state | ${node} | ${super_if2} | down
+| | Given Honeycomb configures interface state | ${node} | ${super_if2} | down
| | And sub-interface Operational Data From Honeycomb Should Be empty
| | ... | ${node} | ${super_if2} | ${sub_if_id}
| | And interface Operational Data From VAT Should Be empty
@@ -466,7 +466,7 @@
| | ... | ${node} | ${super_if} | ${sub_if_id}
| | And sub-interface ipv4 address from VAT should be empty
| | ... | ${node} | ${sub_if_name}
-| | And Honeycomb sets interface ipv4 address | ${node}
+| | And Honeycomb sets interface IPv4 address | ${node}
| | ... | local0 | ${ipv4['address']} | ${ipv4['prefix-length']}
| | When Honeycomb adds unnumbered configuration to interface
| | ... | ${node} | ${super_if}.${sub_if_id} | local0
@@ -485,7 +485,7 @@
| TC23: Honeycomb removes sub-interface unnumbered configuration
| | [Documentation] | Check if Honeycomb can remove unnumbered configuration\
| | ... | from a sub-interface.
-| | [Teardown] | Honeycomb removes interface ipv4 addresses | ${node}
+| | [Teardown] | Honeycomb removes interface IPv4 addresses | ${node}
| | ... | local0
| | Given IPv4 address from Honeycomb should be
| | ... | ${node} | local0 | ${ipv4['address']} | ${ipv4['prefix-length']}
@@ -552,7 +552,7 @@
| | ...
| | [Arguments] | ${node} | ${super_interface} | ${identifier}
| | ...
-| | Honeycomb sets interface state
+| | Honeycomb configures interface state
| | ... | ${node} | ${super_interface} | up
| | Honeycomb sets the sub-interface up
| | ... | ${node} | ${super_interface} | ${identifier}
@@ -572,7 +572,7 @@
| | ...
| | [Arguments] | ${node} | ${super_interface} | ${identifier}
| | ...
-| | Honeycomb sets interface state
+| | Honeycomb configures interface state
| | ... | ${node} | ${super_interface} | down
| | Honeycomb sets the sub-interface down
| | ... | ${node} | ${super_interface} | ${identifier}
diff --git a/tests/func/honeycomb/mgmt-cfg-intip4-intip6-apihc-apivat-func.robot b/tests/func/honeycomb/mgmt-cfg-intip4-intip6-apihc-apivat-func.robot
index edc1713824..dd619efbe7 100644
--- a/tests/func/honeycomb/mgmt-cfg-intip4-intip6-apihc-apivat-func.robot
+++ b/tests/func/honeycomb/mgmt-cfg-intip4-intip6-apihc-apivat-func.robot
@@ -34,11 +34,11 @@
| | Given Interface state from Honeycomb should be
| | ... | ${node} | ${interface} | down
| | And Interface state from VAT should be | ${node} | ${interface} | down
-| | When Honeycomb sets interface state | ${node} | ${interface} | up
+| | When Honeycomb configures interface state | ${node} | ${interface} | up
| | Then Interface state from Honeycomb should be
| | ... | ${node} | ${interface} | up
| | And Interface state from VAT should be | ${node} | ${interface} | up
-| | When Honeycomb sets interface state | ${node} | ${interface} | down
+| | When Honeycomb configures interface state | ${node} | ${interface} | down
| | Then Interface state from Honeycomb should be
| | ... | ${node} | ${interface} | down
| | And Interface state from VAT should be | ${node} | ${interface} | down
@@ -48,7 +48,7 @@
| | ... | with address and netmask provided.
| | Given IPv4 address from Honeycomb should be empty | ${node} | ${interface}
| | And ipv4 address from VAT should be empty | ${node} | ${interface}
-| | When Honeycomb sets interface ipv4 address | ${node} | ${interface}
+| | When Honeycomb sets interface IPv4 address | ${node} | ${interface}
| | ... | ${ipv4_address} | ${ipv4_mask}
| | Then IPv4 address from Honeycomb should be
| | ... | ${node} | ${interface} | ${ipv4_address} | ${ipv4_prefix}
@@ -64,18 +64,18 @@
| | And IPv4 address from VAT should be
| | ... | ${node} | ${interface} | ${ipv4_address}
| | ... | ${ipv4_prefix} | ${ipv4_mask}
-| | When Honeycomb removes interface ipv4 addresses | ${node} | ${interface}
+| | When Honeycomb removes interface IPv4 addresses | ${node} | ${interface}
| | Then IPv4 address from Honeycomb should be empty | ${node} | ${interface}
| | And ipv4 address from VAT should be empty | ${node} | ${interface}
| TC04: Honeycomb modifies interface IPv4 address with prefix
| | [Documentation] | Check if Honeycomb API can configure interfaces for ipv4\
| | ... | with address and prefix provided.
-| | [Teardown] | Honeycomb removes interface ipv4 addresses | ${node}
+| | [Teardown] | Honeycomb removes interface IPv4 addresses | ${node}
| | ... | ${interface}
| | Given IPv4 address from Honeycomb should be empty | ${node} | ${interface}
| | And ipv4 address from VAT should be empty | ${node} | ${interface}
-| | When Honeycomb sets interface ipv4 address with prefix
+| | When Honeycomb sets interface IPv4 address with prefix
| | ... | ${node} | ${interface} | ${ipv4_address2} | ${ipv4_prefix}
| | Then IPv4 address from Honeycomb should be
| | ... | ${node} | ${interface} | ${ipv4_address2} | ${ipv4_prefix}
@@ -85,24 +85,24 @@
| TC05: Honeycomb modifies IPv4 neighbor table
| | [Documentation] | Check if Honeycomb API can add and remove ARP entries.
-| | [Teardown] | Honeycomb clears all interface ipv4 neighbors
+| | [Teardown] | Honeycomb clears all interface IPv4 neighbors
| | ... | ${node} | ${interface}
| | Given IPv4 neighbor from Honeycomb should be empty
| | ... | ${node} | ${interface}
-| | When Honeycomb adds interface ipv4 neighbor
+| | When Honeycomb adds interface IPv4 neighbor
| | ... | ${node} | ${interface} | ${ipv4_neighbor} | ${neighbor_mac}
| | Then IPv4 neighbor from Honeycomb should be
| | ... | ${node} | ${interface} | ${ipv4_neighbor} | ${neighbor_mac}
| TC06: Honeycomb modifies interface configuration - IPv6
| | [Documentation] | Check if Honeycomb API can configure interfaces for ipv6.
-| | [Teardown] | Honeycomb removes interface ipv6 addresses | ${node}
+| | [Teardown] | Honeycomb removes interface IPv6 addresses | ${node}
| | ... | ${interface}
| | Given IPv6 address from Honeycomb should be empty
| | ... | ${node} | ${interface}
| | And IPv6 address from VAT should be empty
| | ... | ${node} | ${interface}
-| | When Honeycomb sets interface ipv6 address
+| | When Honeycomb sets interface IPv6 address
| | ... | ${node} | ${interface} | ${ipv6_address} | ${ipv6_prefix}
| | Then IPv6 address from Honeycomb should contain
| | ... | ${node} | ${interface} | ${ipv6_address} | ${ipv6_prefix}
@@ -111,11 +111,11 @@
| TC07: Honeycomb modifies IPv6 neighbor table
| | [Documentation] | Check if Honeycomb API can add and remove ARP entries.
-| | [Teardown] | Honeycomb clears all interface ipv6 neighbors
+| | [Teardown] | Honeycomb clears all interface IPv6 neighbors
| | ... | ${node} | ${interface}
| | Given IPv6 neighbor from Honeycomb should be empty
| | ... | ${node} | ${interface}
-| | When Honeycomb adds interface ipv6 neighbor
+| | When Honeycomb adds interface IPv6 neighbor
| | ... | ${node} | ${interface} | ${ipv6_neighbor} | ${neighbor_mac}
| | Then IPv6 neighbor from Honeycomb should be
| | ... | ${node} | ${interface} | ${ipv6_neighbor} | ${neighbor_mac}
@@ -133,13 +133,13 @@
| TC09: Honeycomb modifies interface configuration - vrf
| | [Documentation] | Check if Honeycomb API can configure interface\
| | ... | vrf ID.
-| | [Teardown] | Honeycomb sets interface vrf ID
+| | [Teardown] | Honeycomb sets interface VRF ID
| | ... | ${node} | ${interface} | ${0} | ipv4
-| | When Honeycomb sets interface vrf ID
+| | When Honeycomb sets interface VRF ID
| | ... | ${node} | ${interface} | ${1} | ipv4
-| | Then Interface vrf ID from Honeycomb should be
+| | Then Interface VRF ID from Honeycomb should be
| | ... | ${node} | ${interface} | ${1} | ipv4
-| | And Interface vrf ID from VAT should be
+| | And Interface VRF ID from VAT should be
| | ... | ${node} | ${interface} | ${1}
| TC10: Honeycomb can configure multiple IP addresses on one interface
@@ -152,15 +152,15 @@
| | ... | of source and destination IP addresses. Receive an ICMP reply\
| | ... | for every packet sent.
| | ...
-| | Given Path for 2-node testing is set
+| | Given Configure path in 2-node circular topology
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
-| | When Honeycomb sets interface ipv4 address with prefix
+| | When Honeycomb sets interface IPv4 address with prefix
| | ... | ${dut_node} | ${dut_to_tg_if1} | ${ipv4_address} | ${ipv4_prefix}
-| | And Honeycomb adds interface ipv4 address
+| | And Honeycomb adds interface IPv4 address
| | ... | ${dut_node} | ${dut_to_tg_if1} | ${ipv4_address2} | ${ipv4_prefix}
-| | And Honeycomb sets interface ipv6 address
+| | And Honeycomb sets interface IPv6 address
| | ... | ${dut_node} | ${dut_to_tg_if1} | ${ipv6_address} | ${ipv6_prefix}
-| | And Honeycomb adds interface ipv6 address
+| | And Honeycomb adds interface IPv6 address
| | ... | ${dut_node} | ${dut_to_tg_if1} | ${ipv6_address2} | ${ipv6_prefix}
| | Then IPv4 address from Honeycomb should be
| | ... | ${dut_node} | ${dut_to_tg_if1} | ${ipv4_address} | ${ipv4_prefix}
@@ -171,16 +171,16 @@
| | ... | ${dut_node} | ${dut_to_tg_if1} | ${ipv6_address} | ${ipv6_prefix}
| | And IPv6 address from VAT should contain
| | ... | ${dut_node} | ${dut_to_tg_if1} | ${ipv6_address} | ${ipv6_prefix}
-| | And Honeycomb sets interface state | ${dut_node} | ${dut_to_tg_if1} | up
-| | And Honeycomb adds interface ipv4 neighbor | ${dut_node} | ${dut_to_tg_if1}
+| | And Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if1} | up
+| | And Honeycomb adds interface IPv4 neighbor | ${dut_node} | ${dut_to_tg_if1}
| | ... | ${ipv4_neighbor} | ${neighbor_mac}
-| | And Honeycomb adds interface ipv4 neighbor | ${dut_node} | ${dut_to_tg_if1}
+| | And Honeycomb adds interface IPv4 neighbor | ${dut_node} | ${dut_to_tg_if1}
| | ... | ${ipv4_neighbor2} | ${neighbor_mac2}
-| | And Honeycomb adds interface ipv6 neighbor | ${dut_node} | ${dut_to_tg_if1}
+| | And Honeycomb adds interface IPv6 neighbor | ${dut_node} | ${dut_to_tg_if1}
| | ... | ${ipv6_neighbor} | ${neighbor_mac}
-| | And Honeycomb adds interface ipv6 neighbor | ${dut_node} | ${dut_to_tg_if1}
+| | And Honeycomb adds interface IPv6 neighbor | ${dut_node} | ${dut_to_tg_if1}
| | ... | ${ipv6_neighbor2} | ${neighbor_mac2}
-| | And Vpp nodes ra suppress link layer | ${nodes}
+| | And Suppress ICMPv6 router advertisement message | ${nodes}
| | Then Ping and Verify IP address | ${nodes['TG']}
| | ... | ${ipv4_neighbor} | ${ipv4_address}
| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
@@ -201,15 +201,15 @@
| TC11: Honeycomb fails to configure two IPv4 addresses from the same subnet
| | [Documentation] | Check if Honeycomb can configure two IPv4 addresses in\
| | ... | the same subnet onto a single interface. It should not be possible.
-| | [Teardown] | Honeycomb removes interface ipv4 addresses | ${node}
+| | [Teardown] | Honeycomb removes interface IPv4 addresses | ${node}
| | ... | ${interface}
| | [Tags] | EXPECTED_FAILING
# VPP API does not configure the second address, but returns success. VPP-649
-| | When Honeycomb sets interface ipv4 address with prefix
+| | When Honeycomb sets interface IPv4 address with prefix
| | ... | ${node} | ${interface} | 192.168.0.1 | ${9}
-| | Then Honeycomb fails to add interface ipv4 address
+| | Then Honeycomb fails to add interface IPv4 address
| | ... | ${node} | ${interface} | 192.168.0.2 | ${9}
-| | And Honeycomb fails to add interface ipv4 address
+| | And Honeycomb fails to add interface IPv4 address
| | ... | ${node} | ${interface} | 192.232.0.2 | ${9}
| TC12: Honeycomb fails to configure two IPv6 addresses from the same subnet
@@ -217,19 +217,19 @@
| | ... | the same subnet onto a single interface. It should not be possible.
| | [Tags] | EXPECTED_FAILING
# VPP API does not configure the second address, but returns success. VPP-649
-| | [Teardown] | Honeycomb removes interface ipv6 addresses | ${node}
+| | [Teardown] | Honeycomb removes interface IPv6 addresses | ${node}
| | ... | ${interface}
-| | When Honeycomb sets interface ipv6 address
+| | When Honeycomb sets interface IPv6 address
| | ... | ${node} | ${interface} | 10::FF10 | ${64}
-| | Then Honeycomb fails to add interface ipv6 address
+| | Then Honeycomb fails to add interface IPv6 address
| | ... | ${node} | ${interface} | 10::FF11 | ${64}
-| | And Honeycomb fails to add interface ipv6 address
+| | And Honeycomb fails to add interface IPv6 address
| | ... | ${node} | ${interface} | 10::FFFF | ${64}
| TC13: Honeycomb can configure unnumbered interface
| | [Documentation] | Check if Honeycomb can configure an unnumbered interface\
| | ... | on a physical interface, borrowing the IP address of 'local0'.
-| | Given Honeycomb sets interface ipv4 address | ${node}
+| | Given Honeycomb sets interface IPv4 address | ${node}
| | ... | local0 | ${ipv4_address} | ${ipv4_prefix}
| | When Honeycomb adds unnumbered configuration to interface
| | ... | ${node} | ${interface} | local0
diff --git a/tests/func/honeycomb/mgmt-cfg-l2fib-apihc-apivat-func.robot b/tests/func/honeycomb/mgmt-cfg-l2fib-apihc-apivat-func.robot
index 76683a70db..48527b98df 100644
--- a/tests/func/honeycomb/mgmt-cfg-l2fib-apihc-apivat-func.robot
+++ b/tests/func/honeycomb/mgmt-cfg-l2fib-apihc-apivat-func.robot
@@ -46,7 +46,7 @@
| | ...
| | Given Interface state from Honeycomb should be
| | ... | ${node} | ${interface} | down
-| | When Honeycomb sets interface state
+| | When Honeycomb configures interface state
| | ... | ${node} | ${interface} | up
| | Then Interface state from Honeycomb should be
| | ... | ${node} | ${interface} | up
@@ -230,5 +230,5 @@
| Set test interface down
| | [Documentation] | Set the interface used in tests down.
| | ...
-| | Honeycomb sets interface state
+| | Honeycomb configures interface state
| | ... | ${node} | ${interface} | down
diff --git a/tests/func/honeycomb/mgmt-cfg-lisp-apihc-apivat-func.robot b/tests/func/honeycomb/mgmt-cfg-lisp-apihc-apivat-func.robot
index 174a145a52..9f4a328258 100644
--- a/tests/func/honeycomb/mgmt-cfg-lisp-apihc-apivat-func.robot
+++ b/tests/func/honeycomb/mgmt-cfg-lisp-apihc-apivat-func.robot
@@ -33,16 +33,16 @@
| Force Tags | HC_FUNC
*** Test Cases ***
-| TC01: Honeycomb enables Lisp feature
+| TC01: Honeycomb enables LISP feature
| | [Documentation] | Check if Honeycomb can enable the Lisp feature.
| | Given Lisp Should Not Be Configured | ${node}
-| | When Honeycomb Enables Lisp | ${node}
-| | Then Lisp state From Honeycomb Should Be | ${node} | ${state}
-| | And Lisp state From VAT Should Be | ${node} | ${state}
+| | When Honeycomb enables LISP | ${node}
+| | Then LISP state from Honeycomb should be | ${node} | ${state}
+| | And LISP state from VAT should be | ${node} | ${state}
| TC02: Honeycomb adds locator set and locator
| | [Documentation] | Check if Honeycomb can configure a locator set.
-| | Given Lisp state From Honeycomb Should Be | ${node} | ${state}
+| | Given LISP state from Honeycomb should be | ${node} | ${state}
| | When Honeycomb adds locator set | ${node} | ${interface} | ${locator_set}
| | Then Locator Set From Honeycomb Should Be
| | ... | ${node} | ${interface} | ${locator_set}
@@ -50,39 +50,39 @@
| TC03: Honeycomb configures Lisp - remote mapping - Bridge Domain
| | [Documentation] | Check if Honeycomb can configure a remote Lisp mapping\
| | ... | with a bridge domain.
-| | Given Lisp state From Honeycomb Should Be | ${node} | ${state}
+| | Given LISP state from Honeycomb should be | ${node} | ${state}
| | And Honeycomb creates first l2 bridge domain
| | ... | ${node} | ${bd_name} | ${bd_settings}
-| | When Honeycomb adds Lisp mapping | ${node} | ${lisp_settings_remote_bd}
-| | Then Lisp mapping From Honeycomb Should Be
+| | When Honeycomb adds LISP mapping | ${node} | ${lisp_settings_remote_bd}
+| | Then LISP mapping from Honeycomb should be
| | ... | ${node} | ${remote_bd_subtable}
-| | And Lisp mapping From VAT Should Be
+| | And LISP mapping from VAT should be
| | ... | ${node} | ${vat_remote_bd}
| TC04: Honeycomb can remove Lisp mapping
| | [Documentation] | Check if Honeycomb can remove a configured Lisp mapping.
-| | Given Lisp mapping From Honeycomb Should Be
+| | Given LISP mapping from Honeycomb should be
| | ... | ${node} | ${remote_bd_subtable}
-| | And Lisp mapping From VAT Should Be
+| | And LISP mapping from VAT should be
| | ... | ${node} | ${vat_remote_bd}
| | When Honeycomb removes all lisp mappings | ${node}
-| | Then Lisp mappings from Honeycomb should not exist
+| | Then LISP mappings from Honeycomb should not exist
| | ... | ${node}
-| | And Lisp mappings from VAT should not exist
+| | And LISP mappings from VAT should not exist
| | ... | ${node}
| TC05: Honeycomb configures Lisp - remote mapping - VRF
| | [Documentation] | Check if Honeycomb can configure a remote Lisp mapping\
| | ... | with VRF.
| | [Teardown] | Honeycomb removes all lisp mappings | ${node}
-| | Given Lisp mappings from Honeycomb should not exist
+| | Given LISP mappings from Honeycomb should not exist
| | ... | ${node}
-| | And Lisp mappings from VAT should not exist
+| | And LISP mappings from VAT should not exist
| | ... | ${node}
-| | When Honeycomb adds Lisp mapping | ${node} | ${lisp_settings_remote_vrf}
-| | Then Lisp mapping From Honeycomb Should Be
+| | When Honeycomb adds LISP mapping | ${node} | ${lisp_settings_remote_vrf}
+| | Then LISP mapping from Honeycomb should be
| | ... | ${node} | ${remote_vrf_subtable}
-| | And Lisp mapping From VAT Should Be | ${node} | ${vat_remote_vrf}
+| | And LISP mapping from VAT should be | ${node} | ${vat_remote_vrf}
| TC06: Honeycomb configures Lisp - local mapping - Bridge Domain
| | [Documentation] | Check if Honeycomb can configure a local Lisp mapping\
@@ -90,15 +90,15 @@
| | [Teardown] | Honeycomb removes all lisp mappings | ${node}
| | Given Locator Set From Honeycomb Should Be
| | ... | ${node} | ${interface} | ${locator_set}
-| | And Lisp mappings from Honeycomb should not exist
+| | And LISP mappings from Honeycomb should not exist
| | ... | ${node}
-| | And Lisp mappings from VAT should not exist
+| | And LISP mappings from VAT should not exist
| | ... | ${node}
| | And Honeycomb creates first l2 bridge domain
| | ... | ${node} | ${bd2_name} | ${bd_settings}
-| | When Honeycomb adds Lisp mapping | ${node} | ${lisp_settings_local_bd}
-| | Then Lisp mapping From Honeycomb Should Be | ${node} | ${local_bd_subtable}
-| | And Lisp mapping From VAT Should Be | ${node} | ${vat_local_bd}
+| | When Honeycomb adds LISP mapping | ${node} | ${lisp_settings_local_bd}
+| | Then LISP mapping from Honeycomb should be | ${node} | ${local_bd_subtable}
+| | And LISP mapping from VAT should be | ${node} | ${vat_local_bd}
| TC07: Honeycomb configures Lisp - local mapping - VRF
| | [Documentation] | Check if Honeycomb can configure a local Lisp mapping\
@@ -106,13 +106,13 @@
| | [Teardown] | Honeycomb removes all lisp mappings | ${node}
| | Given Locator Set From Honeycomb Should Be
| | ... | ${node} | ${interface} | ${locator_set}
-| | And Lisp mappings from Honeycomb should not exist
+| | And LISP mappings from Honeycomb should not exist
| | ... | ${node}
-| | And Lisp mappings from VAT should not exist
+| | And LISP mappings from VAT should not exist
| | ... | ${node}
-| | When Honeycomb adds Lisp mapping | ${node} | ${lisp_settings_local_vrf}
-| | Then Lisp mapping From Honeycomb Should Be | ${node} | ${local_vrf_subtable}
-| | And Lisp mapping From VAT Should Be | ${node} | ${vat_local_vrf}
+| | When Honeycomb adds LISP mapping | ${node} | ${lisp_settings_local_vrf}
+| | Then LISP mapping from Honeycomb should be | ${node} | ${local_vrf_subtable}
+| | And LISP mapping from VAT should be | ${node} | ${vat_local_vrf}
| TC08: Honeycomb configures Lisp mapping with adjacency
| | [Documentation] | Check if Honeycomb can configure local and remote Lisp\
@@ -122,28 +122,28 @@
| | ... | ${node} | ${interface} | ${locator_set}
| | And Honeycomb creates first l2 bridge domain
| | ... | ${node} | ${bd2_name} | ${bd_settings}
-| | And Lisp mappings from Honeycomb should not exist
+| | And LISP mappings from Honeycomb should not exist
| | ... | ${node}
-| | And Lisp mappings from VAT should not exist
+| | And LISP mappings from VAT should not exist
| | ... | ${node}
-| | And Honeycomb adds Lisp mapping | ${node} | ${lisp_settings_both_vrf}
-| | When Honeycomb adds Lisp adjacency | ${node} | ${7} | remote_map_vrf
+| | And Honeycomb adds LISP mapping | ${node} | ${lisp_settings_both_vrf}
+| | When Honeycomb adds LISP adjacency | ${node} | ${7} | remote_map_vrf
| | ... | adj01 | ${vrf_adjacency}
| | Then Lisp mapping from Honeycomb should be
| | ... | ${node} | ${adj_subtable}
| TC09: Honeycomb configures Lisp Map Resolver
| | [Documentation] | Check if Honeycomb can configure a Lisp Map Resolver.
-| | Given Lisp state From Honeycomb Should Be | ${node} | ${state}
-| | And Lisp state From VAT Should Be | ${node} | ${state}
+| | Given LISP state from Honeycomb should be | ${node} | ${state}
+| | And LISP state from VAT should be | ${node} | ${state}
| | When Honeycomb adds Lisp Map Resolver | ${node} | ${ip_address}
| | Then Map Resolver from Honeycomb should be | ${node} | ${ip_address}
| | And Map Resolver from VAT should be | ${node} | ${ip_address}
| TC10: Honeycomb configures Lisp Map Server
| | [Documentation] | Check if Honeycomb can configure a Lisp Map Server.
-| | Given Lisp state From Honeycomb Should Be | ${node} | ${state}
-| | And Lisp state From VAT Should Be | ${node} | ${state}
+| | Given LISP state from Honeycomb should be | ${node} | ${state}
+| | And LISP state from VAT should be | ${node} | ${state}
| | When Honeycomb adds Lisp Map Server | ${node} | @{ip_addresses}
| | Then Map Server from Honeycomb should be | ${node} | @{ip_addresses}
| | And Map Server from VAT should be | ${node} | @{ip_addresses}
@@ -151,24 +151,24 @@
| TC11: Honeycomb configures Lisp PETR configuration
| | [Documentation] | Check if Honeycomb can configure Lisp
| | ... | PETR configuration.
-| | Given Lisp state From Honeycomb Should Be | ${node} | ${state}
-| | And Lisp state From VAT Should Be | ${node} | ${state}
-| | When Honeycomb enables Lisp PETR feature | ${node} | ${ip_address}
+| | Given LISP state from Honeycomb should be | ${node} | ${state}
+| | And LISP state from VAT should be | ${node} | ${state}
+| | When Honeycomb enables LISP PETR feature | ${node} | ${ip_address}
| | Then PETR configuration from Honeycomb should be | ${node} | ${ip_address}
| | And PETR configuration from VAT should be | ${node} | enabled
| TC12: Honeycomb configures Lisp RLOC Probing
| | [Documentation] | Check if Honeycomb can configure Lisp RLOC Probing.
-| | Given Lisp state From Honeycomb Should Be | ${node} | ${state}
-| | And Lisp state From VAT Should Be | ${node} | ${state}
-| | When Honeycomb enables Lisp RLOC feature | ${node}
+| | Given LISP state from Honeycomb should be | ${node} | ${state}
+| | And LISP state from VAT should be | ${node} | ${state}
+| | When Honeycomb enables LISP RLOC feature | ${node}
| | Then RLOC Probing from Honeycomb should be | ${node} | ${True}
| | And RLOC Probing from VAT should be | ${node} | enabled
| TC13: Honeycomb configures Lisp Map Register
| | [Documentation] | Check if Honeycomb can configure a Lisp Map Register.
-| | Given Lisp state From Honeycomb Should Be | ${node} | ${state}
-| | And Lisp state From VAT Should Be | ${node} | ${state}
+| | Given LISP state from Honeycomb should be | ${node} | ${state}
+| | And LISP state from VAT should be | ${node} | ${state}
| | When Honeycomb adds Lisp Map Register | ${node} | ${True}
| | Then Map Register from Honeycomb should be | ${node} | ${True}
| | And Map Register from VAT should be | ${node} | enabled
@@ -177,7 +177,7 @@
| | [Documentation] | Check if Honeycomb can configure the Lisp PITR feature.
| | Given Locator Set From Honeycomb Should Be
| | ... | ${node} | ${interface} | ${locator_set}
-| | When Honeycomb enables Lisp PITR feature | ${node} | ${locator_set}
+| | When Honeycomb enables LISP PITR feature | ${node} | ${locator_set}
| | Then PITR config from Honeycomb should be | ${node} | ${locator_set}
| | And PITR config from VAT should be | ${node} | ${locator_set}
@@ -185,14 +185,14 @@
| | [Documentation] | Check if Honeycomb can disable all Lisp features.
| | Given Map resolver from Honeycomb should be | ${node} | ${ip_address}
| | And PITR config from Honeycomb should be | ${node} | ${locator_set}
-| | When Honeycomb disables all Lisp features | ${node}
+| | When Honeycomb disables all LISP features | ${node}
| | Then Lisp Should Not Be Configured | ${node}
| TC16: Honeycomb configures Lisp Map Request Mode
| | [Documentation] | Check if Honeycomb can configure Lisp Map Request mode.
| | ... | Note: Map Request Mode cannot be removed once configured.
-| | [Teardown] | Honeycomb disables Lisp | ${node}
-| | Given Honeycomb Enables Lisp | ${node}
+| | [Teardown] | Honeycomb disables LISP | ${node}
+| | Given Honeycomb enables LISP | ${node}
| | When Honeycomb sets Lisp Map Request Mode | ${node} | ${True}
| | Then Map Request Mode from Honeycomb should be
| | ... | ${node} | source-destination
diff --git a/tests/func/honeycomb/mgmt-cfg-pluginacl-apihc-apivat-func.robot b/tests/func/honeycomb/mgmt-cfg-pluginacl-apihc-apivat-func.robot
index abdd94ceb3..7f96472474 100644
--- a/tests/func/honeycomb/mgmt-cfg-pluginacl-apihc-apivat-func.robot
+++ b/tests/func/honeycomb/mgmt-cfg-pluginacl-apihc-apivat-func.robot
@@ -66,17 +66,17 @@
| | And Honeycomb Assigns plugin-acl Chain To Interface
| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_macip}
| | ... | ingress | macip=${True}
-| | When Send TCP Or UDP Packet | ${tg_node} | ${src_ip} | ${dst_ip}
+| | When Send TCP or UDP packet and verify received packet | ${tg_node} | ${src_ip} | ${dst_ip}
| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
| | ... | TCP | ${src_port} | ${dst_port}
| | And Run Keyword And Expect Error | TCP/UDP Rx timeout
-| | ... | Send TCP Or UDP Packet | ${tg_node} | ${src_ip} | ${dst_ip}
+| | ... | Send TCP or UDP packet and verify received packet | ${tg_node} | ${src_ip} | ${dst_ip}
| | ... | ${tg_to_dut_if1} | ${classify_src}
| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
| | ... | TCP | ${src_port} | ${dst_port}
| | And Run Keyword And Expect Error | TCP/UDP Rx timeout
-| | ... | Send TCP Or UDP Packet | ${tg_node} | ${src_ip} | ${dst_ip}
+| | ... | Send TCP or UDP packet and verify received packet | ${tg_node} | ${src_ip} | ${dst_ip}
| | ... | ${tg_to_dut_if1} | ${classify_src2}
| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
| | ... | TCP | ${src_port} | ${dst_port}
@@ -98,18 +98,18 @@
| | ... | ${dut_node} | ${acl_name_l3_ip4} | ${acl_settings}
| | And Honeycomb Assigns plugin-acl Chain To Interface
| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_l3_ip4} | ingress
-| | Then Send TCP Or UDP Packet | ${tg_node}
+| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
| | ... | ${src_ip} | ${dst_ip}
| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
| | ... | UDP | ${src_port} | ${dst_port}
-| | And Send TCP Or UDP Packet | ${tg_node}
+| | And Send TCP or UDP packet and verify received packet | ${tg_node}
| | ... | ${classify_src} | ${classify_dst}
| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
| | ... | TCP | ${src_port} | ${dst_port}
| | And Run Keyword And Expect Error | TCP/UDP Rx timeout
-| | ... | Send TCP Or UDP Packet | ${tg_node}
+| | ... | Send TCP or UDP packet and verify received packet | ${tg_node}
| | ... | ${classify_src} | ${classify_dst}
| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
@@ -132,18 +132,18 @@
| | ... | ${dut_node} | ${acl_name_l3_ip6} | ${acl_settings}
| | And Honeycomb Assigns plugin-acl Chain To Interface
| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_l3_ip6} | ingress
-| | Then Send TCP Or UDP Packet | ${tg_node}
+| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
| | ... | ${src_ip} | ${dst_ip}
| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
| | ... | UDP | ${src_port} | ${dst_port}
-| | And Send TCP Or UDP Packet | ${tg_node}
+| | And Send TCP or UDP packet and verify received packet | ${tg_node}
| | ... | ${classify_src} | ${classify_dst}
| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
| | ... | TCP | ${src_port} | ${dst_port}
| | And Run Keyword And Expect Error | TCP/UDP Rx timeout
-| | ... | Send TCP Or UDP Packet | ${tg_node}
+| | ... | Send TCP or UDP packet and verify received packet | ${tg_node}
| | ... | ${classify_src} | ${classify_dst}
| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
@@ -166,19 +166,19 @@
| | ... | ${dut_node} | ${acl_name_l4} | ${acl_settings}
| | And Honeycomb Assigns plugin-acl Chain To Interface
| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_l4} | ingress
-| | Then Send TCP Or UDP Packet | ${tg_node}
+| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
| | ... | ${src_ip} | ${dst_ip}
| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
| | ... | TCP | ${src_port} | ${dst_port}
| | And Run Keyword And Expect Error | TCP/UDP Rx timeout
-| | ... | Send TCP Or UDP Packet | ${tg_node}
+| | ... | Send TCP or UDP packet and verify received packet | ${tg_node}
| | ... | ${src_ip} | ${dst_ip}
| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
| | ... | TCP | ${classify_src} | ${classify_dst}
| | And Run Keyword And Expect Error | TCP/UDP Rx timeout
-| | ... | Send TCP Or UDP Packet | ${tg_node}
+| | ... | Send TCP or UDP packet and verify received packet | ${tg_node}
| | ... | ${src_ip} | ${dst_ip}
| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
@@ -201,17 +201,17 @@
| | ... | ${dut_node} | ${acl_name_mixed} | ${acl_settings}
| | And Honeycomb Assigns plugin-acl Chain To Interface
| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_mixed} | ingress
-| | Then Send TCP Or UDP Packet | ${tg_node} | ${src_ip} | ${dst_ip}
+| | Then Send TCP or UDP packet and verify received packet | ${tg_node} | ${src_ip} | ${dst_ip}
| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
| | ... | TCP | ${src_port} | ${dst_port}
-| | Then Send TCP Or UDP Packet | ${tg_node}
+| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
| | ... | ${classify_src_ip} | ${classify_dst_ip}
| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
| | ... | TCP | ${src_port} | ${dst_port}
| | And Run Keyword And Expect Error | TCP/UDP Rx timeout
-| | ... | Send TCP Or UDP Packet | ${tg_node}
+| | ... | Send TCP or UDP packet and verify received packet | ${tg_node}
| | ... | ${classify_src_ip} | ${classify_dst_ip}
| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
@@ -233,18 +233,18 @@
| | ... | ${dut_node} | ${acl_name_icmp} | ${acl_settings}
| | And Honeycomb Assigns plugin-acl Chain To Interface
| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_icmp} | ingress
-| | Then Send ICMP packet with type and code | ${tg_node}
+| | Then Send ICMP packet with type and code and verify received packet | ${tg_node}
| | ... | ${src_ip} | ${dst_ip}
| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
| | ... | ${icmp_type} | ${icmp_code}
-| | Then Send ICMP packet with type and code | ${tg_node}
+| | Then Send ICMP packet with type and code and verify received packet | ${tg_node}
| | ... | ${src_ip} | ${dst_ip}
| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
| | ... | ${classify_type} | ${icmp_code}
| | And Run Keyword And Expect Error | ICMP echo Rx timeout
-| | ... | Send ICMP packet with type and code | ${tg_node}
+| | ... | Send ICMP packet with type and code and verify received packet | ${tg_node}
| | ... | ${src_ip} | ${dst_ip}
| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
@@ -266,18 +266,18 @@
| | ... | ${dut_node} | ${acl_name_icmpv6} | ${acl_settings}
| | And Honeycomb Assigns plugin-acl Chain To Interface
| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_icmpv6} | ingress
-| | Then Send ICMP packet with type and code | ${tg_node}
+| | Then Send ICMP packet with type and code and verify received packet | ${tg_node}
| | ... | ${src_ip} | ${dst_ip}
| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
| | ... | ${icmp_type} | ${icmp_code}
-| | Then Send ICMP packet with type and code | ${tg_node}
+| | Then Send ICMP packet with type and code and verify received packet | ${tg_node}
| | ... | ${src_ip} | ${dst_ip}
| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
| | ... | ${classify_type} | ${icmp_code}
| | And Run Keyword And Expect Error | ICMP echo Rx timeout
-| | ... | Send ICMP packet with type and code | ${tg_node}
+| | ... | Send ICMP packet with type and code and verify received packet | ${tg_node}
| | ... | ${src_ip} | ${dst_ip}
| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
@@ -308,17 +308,17 @@
| | And Honeycomb Assigns plugin-acl Chain To Interface
| | ... | ${dut_node} | ${dut_to_tg_if1} | block_all | ingress
| | And Run Keyword And Expect Error | TCP/UDP Rx timeout
-| | ... | Send TCP Or UDP Packet | ${tg_node}
+| | ... | Send TCP or UDP packet and verify received packet | ${tg_node}
| | ... | ${classify_src} | ${classify_dst}
| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
| | ... | TCP | ${src_port} | ${dst_port}
-| | And Send TCP Or UDP Packet | ${tg_node}
+| | And Send TCP or UDP packet and verify received packet | ${tg_node}
| | ... | ${classify_dst} | ${classify_src}
| | ... | ${tg_to_dut_if2} | ${tg_to_dut_if2_mac}
| | ... | ${tg_to_dut_if1} | ${dut_to_tg_if2_mac}
| | ... | TCP | ${dst_port} | ${src_port}
-| | And Send TCP Or UDP Packet | ${tg_node}
+| | And Send TCP or UDP packet and verify received packet | ${tg_node}
| | ... | ${classify_src} | ${classify_dst}
| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
@@ -344,18 +344,18 @@
| | ... | ${dut_node} | ${acl_name_l3_ip4} | ${acl_settings}
| | And Honeycomb Assigns plugin-acl Chain To Interface
| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_l3_ip4} | ingress
-| | Then Send TCP Or UDP Packet | ${tg_node}
+| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
| | ... | ${src_ip} | ${dst_ip}
| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
| | ... | UDP | ${src_port} | ${dst_port}
-| | And Send TCP Or UDP Packet | ${tg_node}
+| | And Send TCP or UDP packet and verify received packet | ${tg_node}
| | ... | ${classify_src} | ${classify_dst}
| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
| | ... | TCP | ${src_port} | ${dst_port}
| | And Run Keyword And Expect Error | TCP/UDP Rx timeout
-| | ... | Send TCP Or UDP Packet | ${tg_node}
+| | ... | Send TCP or UDP packet and verify received packet | ${tg_node}
| | ... | ${classify_src} | ${classify_dst}
| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
@@ -372,18 +372,18 @@
| | ... | to the other, using different IPv6 IPs. Receive all packets except\
| | ... | those with IPs in the filtered ranges and UDP protocol payload.
| | [Teardown] | Routed ACL test teardown - ipv6
-| | Given Path for 2-node testing is set
+| | Given Configure path in 2-node circular topology
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
| | And Import Variables | resources/test_data/honeycomb/plugin_acl.py
| | ... | L3_IP6 | ${acl_name_l3_ip6}
-| | And Honeycomb sets interface state | ${dut_node} | ${dut_to_tg_if1} | up
-| | And Honeycomb sets interface state | ${dut_node} | ${dut_to_tg_if2} | up
-| | And Honeycomb sets interface ipv6 address | ${dut_node}
+| | And Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if1} | up
+| | And Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if2} | up
+| | And Honeycomb sets interface IPv6 address | ${dut_node}
| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip} | ${prefix_length}
-| | And Honeycomb sets interface ipv6 address | ${dut_node}
+| | And Honeycomb sets interface IPv6 address | ${dut_node}
| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip} | ${prefix_length}
| | And VPP RA suppress link layer | ${dut_node} | ${dut_to_tg_if2}
-| | And Honeycomb adds interface ipv6 neighbor
+| | And Honeycomb adds interface IPv6 neighbor
| | ... | ${node} | ${dut_to_tg_if2} | ${gateway} | ${tg_to_dut_if2_mac}
| | And VPP Route Add | ${node} | ${dst_net} | ${prefix_length}
| | ... | ${gateway} | interface=${dut_to_tg_if2} | use_sw_index=False
@@ -393,18 +393,18 @@
| | ... | ${dut_node} | ${acl_name_l3_ip6} | ${acl_settings}
| | And Honeycomb Assigns plugin-acl Chain To Interface
| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_l3_ip6} | ingress
-| | Then Send TCP Or UDP Packet | ${tg_node}
+| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
| | ... | ${src_ip} | ${dst_ip}
| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
| | ... | UDP | ${src_port} | ${dst_port}
-| | And Send TCP Or UDP Packet | ${tg_node}
+| | And Send TCP or UDP packet and verify received packet | ${tg_node}
| | ... | ${classify_src} | ${classify_dst}
| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
| | ... | TCP | ${src_port} | ${dst_port}
| | And Run Keyword And Expect Error | TCP/UDP Rx timeout
-| | ... | Send TCP Or UDP Packet | ${tg_node}
+| | ... | Send TCP or UDP packet and verify received packet | ${tg_node}
| | ... | ${classify_src} | ${classify_dst}
| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
@@ -427,19 +427,19 @@
| | ... | ${dut_node} | ${acl_name_l4} | ${acl_settings}
| | And Honeycomb Assigns plugin-acl Chain To Interface
| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_l4} | ingress
-| | Then Send TCP Or UDP Packet | ${tg_node}
+| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
| | ... | ${src_ip} | ${dst_ip}
| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
| | ... | TCP | ${src_port} | ${dst_port}
| | And Run Keyword And Expect Error | TCP/UDP Rx timeout
-| | ... | Send TCP Or UDP Packet | ${tg_node}
+| | ... | Send TCP or UDP packet and verify received packet | ${tg_node}
| | ... | ${src_ip} | ${dst_ip}
| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
| | ... | TCP | ${classify_src} | ${classify_dst}
| | And Run Keyword And Expect Error | TCP/UDP Rx timeout
-| | ... | Send TCP Or UDP Packet | ${tg_node}
+| | ... | Send TCP or UDP packet and verify received packet | ${tg_node}
| | ... | ${src_ip} | ${dst_ip}
| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
@@ -462,17 +462,17 @@
| | ... | ${dut_node} | ${acl_name_mixed} | ${acl_settings}
| | And Honeycomb Assigns plugin-acl Chain To Interface
| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_mixed} | ingress
-| | Then Send TCP Or UDP Packet | ${tg_node} | ${src_ip} | ${dst_ip}
+| | Then Send TCP or UDP packet and verify received packet | ${tg_node} | ${src_ip} | ${dst_ip}
| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
| | ... | TCP | ${src_port} | ${dst_port}
-| | Then Send TCP Or UDP Packet | ${tg_node}
+| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
| | ... | ${classify_src_ip} | ${classify_dst_ip}
| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
| | ... | TCP | ${src_port} | ${dst_port}
| | And Run Keyword And Expect Error | TCP/UDP Rx timeout
-| | ... | Send TCP Or UDP Packet | ${tg_node}
+| | ... | Send TCP or UDP packet and verify received packet | ${tg_node}
| | ... | ${classify_src_ip} | ${classify_dst_ip}
| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
| | ... | ${tg_to_dut_if2} | ${dst_mac}
@@ -495,18 +495,18 @@
| | ... | ${dut_node} | ${acl_name_icmp} | ${acl_settings}
| | And Honeycomb Assigns plugin-acl Chain To Interface
| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_icmp} | ingress
-| | Then Send ICMP packet with type and code | ${tg_node}
+| | Then Send ICMP packet with type and code and verify received packet | ${tg_node}
| | ... | ${src_ip} | ${dst_ip}
| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
| | ... | ${icmp_type} | ${icmp_code}
-| | Then Send ICMP packet with type and code | ${tg_node}
+| | Then Send ICMP packet with type and code and verify received packet | ${tg_node}
| | ... | ${src_ip} | ${dst_ip}
| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
| | ... | ${classify_type} | ${icmp_code}
| | And Run Keyword And Expect Error | ICMP echo Rx timeout
-| | ... | Send ICMP packet with type and code | ${tg_node}
+| | ... | Send ICMP packet with type and code and verify received packet | ${tg_node}
| | ... | ${src_ip} | ${dst_ip}
| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
@@ -523,17 +523,17 @@
| | ... | to the other, using different codes and types. Receive all packets\
| | ... | except those with the filtered type and code.
| | [Teardown] | Routed ACL test teardown - ipv6
-| | Given Path for 2-node testing is set
+| | Given Configure path in 2-node circular topology
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
| | And Import Variables | resources/test_data/honeycomb/plugin_acl.py
| | ... | icmpv6 | ${acl_name_icmpv6}
-| | And Honeycomb sets interface state | ${dut_node} | ${dut_to_tg_if1} | up
-| | And Honeycomb sets interface state | ${dut_node} | ${dut_to_tg_if2} | up
-| | And Honeycomb sets interface ipv6 address | ${dut_node}
+| | And Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if1} | up
+| | And Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if2} | up
+| | And Honeycomb sets interface IPv6 address | ${dut_node}
| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip} | ${prefix_length}
-| | And Honeycomb sets interface ipv6 address | ${dut_node}
+| | And Honeycomb sets interface IPv6 address | ${dut_node}
| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip} | ${prefix_length}
-| | And Honeycomb adds interface ipv6 neighbor
+| | And Honeycomb adds interface IPv6 neighbor
| | ... | ${node} | ${dut_to_tg_if2} | ${gateway} | ${tg_to_dut_if2_mac}
| | And VPP RA suppress link layer | ${dut_node} | ${dut_to_tg_if2}
| | And VPP Route Add | ${node} | ${dst_net} | ${prefix_length}
@@ -544,18 +544,18 @@
| | ... | ${dut_node} | ${acl_name_icmpv6} | ${acl_settings}
| | And Honeycomb Assigns plugin-acl Chain To Interface
| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_icmpv6} | ingress
-| | Then Send ICMP packet with type and code | ${tg_node}
+| | Then Send ICMP packet with type and code and verify received packet | ${tg_node}
| | ... | ${src_ip} | ${dst_ip}
| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
| | ... | ${icmp_type} | ${icmp_code}
-| | Then Send ICMP packet with type and code | ${tg_node}
+| | Then Send ICMP packet with type and code and verify received packet | ${tg_node}
| | ... | ${src_ip} | ${dst_ip}
| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
| | ... | ${classify_type} | ${icmp_code}
| | And Run Keyword And Expect Error | ICMP echo Rx timeout
-| | ... | Send ICMP packet with type and code | ${tg_node}
+| | ... | Send ICMP packet with type and code and verify received packet | ${tg_node}
| | ... | ${src_ip} | ${dst_ip}
| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
@@ -595,17 +595,17 @@
| | And Honeycomb Assigns plugin-acl Chain To Interface
| | ... | ${dut_node} | ${dut_to_tg_if1} | block_all | ingress
| | And Run Keyword And Expect Error | TCP/UDP Rx timeout
-| | ... | Send TCP Or UDP Packet | ${tg_node}
+| | ... | Send TCP or UDP packet and verify received packet | ${tg_node}
| | ... | ${classify_src} | ${classify_dst}
| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
| | ... | TCP | ${src_port} | ${dst_port}
-| | And Send TCP Or UDP Packet | ${tg_node}
+| | And Send TCP or UDP packet and verify received packet | ${tg_node}
| | ... | ${classify_dst} | ${classify_src}
| | ... | ${tg_to_dut_if2} | ${tg_to_dut_if2_mac}
| | ... | ${tg_to_dut_if1} | ${dut_to_tg_if2_mac}
| | ... | TCP | ${dst_port} | ${src_port}
-| | And Send TCP Or UDP Packet | ${tg_node}
+| | And Send TCP or UDP packet and verify received packet | ${tg_node}
| | ... | ${classify_src} | ${classify_dst}
| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
@@ -616,17 +616,17 @@
| | [Documentation] | Import test variables, set interfaces up,
| | ... | configure IPv4 addresses, add neighbor entry and routes.
| | [Arguments] | ${test_data_id} | ${acl_name}
-| | Path for 2-node testing is set
+| | Configure path in 2-node circular topology
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
| | Import Variables | resources/test_data/honeycomb/plugin_acl.py
| | ... | ${test_data_id} | ${acl_name}
-| | Honeycomb sets interface state | ${dut_node} | ${dut_to_tg_if1} | up
-| | Honeycomb sets interface state | ${dut_node} | ${dut_to_tg_if2} | up
-| | Honeycomb sets interface ipv4 address with prefix | ${dut_node}
+| | Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if1} | up
+| | Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if2} | up
+| | Honeycomb sets interface IPv4 address with prefix | ${dut_node}
| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip} | ${prefix_length}
-| | Honeycomb sets interface ipv4 address with prefix | ${dut_node}
+| | Honeycomb sets interface IPv4 address with prefix | ${dut_node}
| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip} | ${prefix_length}
-| | And Honeycomb adds interface ipv4 neighbor
+| | And Honeycomb adds interface IPv4 neighbor
| | ... | ${node} | ${dut_to_tg_if2} | ${gateway} | ${tg_to_dut_if2_mac}
| | VPP Route Add
| | ... | ${node} | ${dst_net} | ${prefix_length} | ${gateway}
@@ -638,7 +638,7 @@
| Setup interfaces and bridge domain for plugin-acl test
| | [Documentation] | Import test variables, set interfaces up and bridge them.
| | [Arguments] | ${test_data_id} | ${acl_name}
-| | Path For 2-node Testing Is Set
+| | Configure path in 2-node circular topology
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
| | Import Variables | resources/test_data/honeycomb/plugin_acl.py
| | ... | ${test_data_id} | ${acl_name}
@@ -665,8 +665,8 @@
| | Show Packet Trace on All DUTs | ${nodes}
| | Read plugin-ACL configuration from VAT | ${node}
| | Clear plugin-acl Settings | ${node} | ${dut_to_tg_if1}
-| | Honeycomb removes interface ipv4 addresses | ${node} | ${dut_to_tg_if1}
-| | Honeycomb clears all interface ipv4 neighbors | ${node} | ${dut_to_tg_if1}
+| | Honeycomb removes interface IPv4 addresses | ${node} | ${dut_to_tg_if1}
+| | Honeycomb clears all interface IPv4 neighbors | ${node} | ${dut_to_tg_if1}
| Routed ACL test teardown - ipv6
| | [Documentation] | Log packet trace and ACL settings,
@@ -674,5 +674,5 @@
| | Show Packet Trace on All DUTs | ${nodes}
| | Clear plugin-acl Settings | ${node} | ${dut_to_tg_if1}
| | Read plugin-ACL configuration from VAT | ${node}
-| | Honeycomb removes interface ipv6 addresses | ${node} | ${dut_to_tg_if1}
-| | Honeycomb clears all interface ipv6 neighbors | ${node} | ${dut_to_tg_if1}
+| | Honeycomb removes interface IPv6 addresses | ${node} | ${dut_to_tg_if1}
+| | Honeycomb clears all interface IPv6 neighbors | ${node} | ${dut_to_tg_if1}
diff --git a/tests/func/honeycomb/mgmt-cfg-policer-apihc-func.robot b/tests/func/honeycomb/mgmt-cfg-policer-apihc-func.robot
index 2884f7c628..d9b6aaaa9c 100644
--- a/tests/func/honeycomb/mgmt-cfg-policer-apihc-func.robot
+++ b/tests/func/honeycomb/mgmt-cfg-policer-apihc-func.robot
@@ -53,7 +53,7 @@
| TC03: Honeycomb can configure Policer with increased values of CIR (900kbps)
| | [Documentation] | Checks if Honeycomb can configure Policer\
| | ... | with increased values of CIR.
-| | [Teardown] | Policer test teardown | ${node}
+| | [Teardown] | Tear down policer test | ${node}
| | Given Policer Operational Data From Honeycomb Should Be empty | ${node}
| | When Honeycomb configures Policer | ${node} | ${policer_data_2}
| | Then Policer Operational Data From Honeycomb Should Be | ${node}
@@ -62,7 +62,7 @@
| TC04: Honeycomb can configure Packets-Per-Second Based Policer
| | [Documentation] | Checks if Honeycomb can configure Policer\
| | ... | based on rate-type measured in pps.
-| | [Teardown] | Policer test teardown | ${node}
+| | [Teardown] | Tear down policer test | ${node}
| | Given Policer Operational Data From Honeycomb Should Be empty | ${node}
| | When Honeycomb configures Policer | ${node} | ${policer_data_3}
| | Then Policer Operational Data From Honeycomb Should Be | ${node}
@@ -78,7 +78,7 @@
| | ... | ${acl_tables['hc_acl_session']['match']} | AND
| | ... | Honeycomb removes ACL table | ${node}
| | ... | ${acl_tables['hc_acl_table']['name']} | AND
-| | ... | Policer test teardown | ${node}
+| | ... | Tear down policer test | ${node}
| | Given Honeycomb configures Policer | ${node} | ${policer_data}
| | And ACL table from Honeycomb should not exist
| | ... | ${node} | ${acl_tables['hc_acl_table']['name']}
@@ -100,7 +100,7 @@
| | ... | Packet on DUT1 is marked with DSCP tag. Verifies if DUT1 sends\
| | ... | correct IPv4 TCP packet with correct DSCP on the second link to TG.
| | [Teardown] | Show Packet Trace on All DUTs | ${nodes}
-| | Given Path for 2-node testing is set
+| | Given Configure path in 2-node circular topology
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
| | And Honeycomb configures Policer | ${dut_node} | ${policer_data_3}
| | And ACL table from Honeycomb should not exist
@@ -112,17 +112,17 @@
| | ... | ${acl_tables['hc_acl_session']}
| | And Honeycomb enables policer on interface
| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_tables['hc_acl_table']['name']}
-| | And Honeycomb sets interface state | ${dut_node} | ${dut_to_tg_if1} | up
-| | And Honeycomb sets interface state | ${dut_node} | ${dut_to_tg_if2} | up
-| | And Honeycomb sets interface ipv4 address with prefix | ${dut_node}
+| | And Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if1} | up
+| | And Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if2} | up
+| | And Honeycomb sets interface IPv4 address with prefix | ${dut_node}
| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip} | ${prefix_length}
-| | And Honeycomb sets interface ipv4 address with prefix | ${dut_node}
+| | And Honeycomb sets interface IPv4 address with prefix | ${dut_node}
| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip} | ${prefix_length}
-| | And Honeycomb adds interface ipv4 neighbor
+| | And Honeycomb adds interface IPv4 neighbor
| | ... | ${dut_node} | ${dut_to_tg_if2} | ${tg_to_dut_if2_ip}
| | ... | ${tg_to_dut_if2_mac}
| | And interfaceCLI.VPP Node Interfaces Ready Wait | ${dut_node}
-| | Then Honeycomb Send Packet and Verify Marking | ${tg_node}
+| | Then Honeycomb Send packet and verify marking | ${tg_node}
| | ... | ${tg_to_dut_if1}
| | ... | ${tg_to_dut_if2} | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_mac}
| | ... | ${tg_to_dut_if1_ip} | ${tg_to_dut_if2_ip} | ${dscp_number}
diff --git a/tests/func/honeycomb/mgmt-cfg-proxyarp-apihc-func.robot b/tests/func/honeycomb/mgmt-cfg-proxyarp-apihc-func.robot
index 23ece5ed5e..056771512f 100644
--- a/tests/func/honeycomb/mgmt-cfg-proxyarp-apihc-func.robot
+++ b/tests/func/honeycomb/mgmt-cfg-proxyarp-apihc-func.robot
@@ -62,16 +62,16 @@
| | [Teardown] | Run Keywords
| | ... | Show Packet Trace on all DUTs | ${nodes}
| | ... | AND | Honeycomb removes proxyARP configuration | ${node}
-| | ... | AND | Honeycomb sets interface state
+| | ... | AND | Honeycomb configures interface state
| | ... | ${dut_node} | ${dut_to_tg_if1} | down
-| | ... | AND | Honeycomb removes interface ipv4 addresses
+| | ... | AND | Honeycomb removes interface IPv4 addresses
| | ... | ${node} | ${interface}
-| | Given Path for 2-node testing is set
+| | Given Configure path in 2-node circular topology
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
| | ${dut_to_tg_name}= | Get interface name | ${dut_node} | ${dut_to_tg_if1}
| | ${tg_to_dut_name}= | Get interface name | ${tg_node} | ${tg_to_dut_if1}
-| | And Honeycomb sets interface state | ${dut_node} | ${dut_to_tg_if1} | up
-| | And Honeycomb sets interface ipv4 address with prefix | ${dut_node}
+| | And Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if1} | up
+| | And Honeycomb sets interface IPv4 address with prefix | ${dut_node}
| | ... | ${dut_to_tg_if1} | ${dut_to_tg_ip} | ${prefix_length}
| | When Honeycomb configures proxyARP | ${dut_node} | ${proxyarp_settings_ipv4}
| | And Honeycomb enables proxyARP on interface | ${node} | ${dut_to_tg_name}
diff --git a/tests/func/honeycomb/mgmt-cfg-proxynd6-apihc-func.robot b/tests/func/honeycomb/mgmt-cfg-proxynd6-apihc-func.robot
index c934b06a84..abc03c04f4 100644
--- a/tests/func/honeycomb/mgmt-cfg-proxynd6-apihc-func.robot
+++ b/tests/func/honeycomb/mgmt-cfg-proxynd6-apihc-func.robot
@@ -44,7 +44,7 @@
| | [Documentation] | Check if Honeycomb can configure the IPv6 ND proxy\
| | ... | feature on an interface.
| | Given IPv6 ND proxy from Honeycomb should be empty | ${node} | ${interface}
-| | And Honeycomb sets interface state | ${node} | ${interface} | up
+| | And Honeycomb configures interface state | ${node} | ${interface} | up
| | When Honeycomb configures IPv6 ND proxy on interface
| | ... | ${node} | ${interface} | ${test_dst_ip}
| | Then IPv6 ND proxy from Honeycomb should be
@@ -64,7 +64,7 @@
| | [Teardown] | Honeycomb disables IPv6 ND proxy on interface
| | ... | ${node} | ${interface}
| | Given IPv6 ND proxy from Honeycomb should be empty | ${node} | ${interface}
-| | And Honeycomb sets interface state | ${node} | ${interface} | up
+| | And Honeycomb configures interface state | ${node} | ${interface} | up
| | When Honeycomb configures IPv6 ND proxy on interface
| | ... | ${node} | ${interface} | ${test_dst_ip} | ${test_dst_ip2}
| | Then IPv6 ND proxy from Honeycomb should be
@@ -85,23 +85,23 @@
| | ... | Show Packet Trace on All DUTs | ${nodes} | AND
| | ... | Honeycomb disables IPv6 ND proxy on interface
| | ... | ${dut_node} | ${dut_to_tg_if2}
-| | Given Path for 2-node testing is set
+| | Given Configure path in 2-node circular topology
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
-| | Honeycomb sets interface state | ${dut_node} | ${dut_to_tg_if1} | up
-| | Honeycomb sets interface state | ${dut_node} | ${dut_to_tg_if2} | up
-| | Honeycomb sets interface ipv6 address | ${dut_node}
+| | Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if1} | up
+| | Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if2} | up
+| | Honeycomb sets interface IPv6 address | ${dut_node}
| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip} | ${prefix_length}
-| | Honeycomb sets interface ipv6 address | ${dut_node}
+| | Honeycomb sets interface IPv6 address | ${dut_node}
| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip} | ${prefix_length}
| | And Vpp Ra Suppress Link Layer | ${dut_node} | ${dut_to_tg_if1}
| | And Vpp Ra Suppress Link Layer | ${dut_node} | ${dut_to_tg_if2}
-| | And Honeycomb adds interface ipv6 neighbor | ${dut_node} | ${dut_to_tg_if1}
+| | And Honeycomb adds interface IPv6 neighbor | ${dut_node} | ${dut_to_tg_if1}
| | ... | ${test_src_ip} | ${tg_to_dut_if1_mac}
-| | And Honeycomb adds interface ipv6 neighbor | ${dut_node} | ${dut_to_tg_if2}
+| | And Honeycomb adds interface IPv6 neighbor | ${dut_node} | ${dut_to_tg_if2}
| | ... | ${test_dst_ip} | ${tg_to_dut_if2_mac}
| | When Honeycomb configures IPv6 ND proxy on interface
| | ... | ${dut_node} | ${dut_to_tg_if2} | ${test_dst_ip}
-| | Then Verify IPv6ND Proxy | ${tg_node}
+| | Then Verify IPv6ND proxy | ${tg_node}
| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if2}
| | ... | ${test_src_ip} | ${test_dst_ip}
| | ... | ${tg_to_dut_if1_mac} | ${tg_to_dut_if2_mac}
diff --git a/tests/func/honeycomb/mgmt-cfg-routing-apihc-apivat-func.robot b/tests/func/honeycomb/mgmt-cfg-routing-apihc-apivat-func.robot
index a722adaa7b..e0544f71bb 100644
--- a/tests/func/honeycomb/mgmt-cfg-routing-apihc-apivat-func.robot
+++ b/tests/func/honeycomb/mgmt-cfg-routing-apihc-apivat-func.robot
@@ -43,7 +43,7 @@
| | ... | ${node} | table1 | ipv4 | ${table1} | ${1}
| | Then Routing data from Honeycomb should contain
| | ... | ${node} | table1 | ipv4 | ${table1_oper}
-| | And Verify Route IPv4 | ${nodes['TG']}
+| | And Verify route IPv4 | ${nodes['TG']}
| | ... | ${src_ip} | ${dst_ip}
| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
@@ -60,9 +60,9 @@
| | ... | Receive packet on the second TG interface.
| | ${table}= | Set Variable | table2
| | Given Setup interfaces and neighbors for IPv4 routing test
-| | And Honeycomb adds interface ipv4 neighbor | ${dut_node} | ${dut_to_tg_if2}
+| | And Honeycomb adds interface IPv4 neighbor | ${dut_node} | ${dut_to_tg_if2}
| | ... | ${next_hop1} | ${next_hop_mac1}
-| | And Honeycomb adds interface ipv4 neighbor | ${dut_node} | ${dut_to_tg_if2}
+| | And Honeycomb adds interface IPv4 neighbor | ${dut_node} | ${dut_to_tg_if2}
| | ... | ${next_hop2} | ${next_hop_mac2}
| | When Honeycomb configures routing table
| | ... | ${node} | table2 | ipv4 | ${table2} | ${1}
@@ -90,7 +90,7 @@
| | Then Routing data from Honeycomb should contain
| | ... | ${node} | table3 | ipv4 | ${table3_oper}
| | And Run keyword and Expect Error | ICMP echo Rx timeout
-| | ... | Verify Route IPv4 | ${nodes['TG']}
+| | ... | Verify route IPv4 | ${nodes['TG']}
| | ... | ${src_ip} | ${dst_ip}
| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
@@ -109,7 +109,7 @@
| | ... | ${node} | table4 | ipv6 | ${table4} | ${1}
| | Then Routing data from Honeycomb should contain
| | ... | ${node} | table4 | ipv6 | ${table4_oper}
-| | And Verify Route IPv6 | ${nodes['TG']}
+| | And Verify route IPv6 | ${nodes['TG']}
| | ... | ${src_ip} | ${next_hop}
| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
@@ -126,9 +126,9 @@
| | ... | Receive packet on the second TG interface.
| | ${table}= | Set Variable | table5
| | Given Setup interfaces and neighbors for IPv6 routing test
-| | And Honeycomb adds interface ipv6 neighbor | ${dut_node} | ${dut_to_tg_if2}
+| | And Honeycomb adds interface IPv6 neighbor | ${dut_node} | ${dut_to_tg_if2}
| | ... | ${next_hop1} | ${next_hop_mac1}
-| | And Honeycomb adds interface ipv6 neighbor | ${dut_node} | ${dut_to_tg_if2}
+| | And Honeycomb adds interface IPv6 neighbor | ${dut_node} | ${dut_to_tg_if2}
| | ... | ${next_hop2} | ${next_hop_mac2}
| | When Honeycomb configures routing table
| | ... | ${node} | table5 | ipv6 | ${table5} | ${1}
@@ -156,48 +156,48 @@
| | Then Routing data from Honeycomb should contain
| | ... | ${node} | table6 | ipv6 | ${table6_oper}
| | And Run keyword and Expect Error | ICMP echo Rx timeout
-| | ... | Verify Route IPv6 | ${nodes['TG']}
+| | ... | Verify route IPv6 | ${nodes['TG']}
| | ... | ${src_ip} | ${dst_ip}
| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
*** Keywords ***
| Setup interfaces and neighbors for IPv4 routing test
-| | Path for 2-node testing is set
+| | Configure path in 2-node circular topology
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
| | Import Variables | resources/test_data/honeycomb/routing.py
| | ... | ${nodes['DUT1']} | ipv4 | ${dut_to_tg_if2}
| | Setup vrf IDs | ${dut_node} | ${dut_to_tg_if1} | ${1}
| | Setup vrf IDs | ${dut_node} | ${dut_to_tg_if2} | ${1}
-| | Honeycomb sets interface state | ${dut_node} | ${dut_to_tg_if1} | up
-| | Honeycomb sets interface state | ${dut_node} | ${dut_to_tg_if2} | up
-| | Honeycomb sets interface ipv4 address with prefix | ${dut_node}
+| | Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if1} | up
+| | Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if2} | up
+| | Honeycomb sets interface IPv4 address with prefix | ${dut_node}
| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip} | ${prefix_len}
-| | Honeycomb sets interface ipv4 address with prefix | ${dut_node}
+| | Honeycomb sets interface IPv4 address with prefix | ${dut_node}
| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip} | ${prefix_len}
-| | Honeycomb adds interface ipv4 neighbor | ${dut_node} | ${dut_to_tg_if1}
+| | Honeycomb adds interface IPv4 neighbor | ${dut_node} | ${dut_to_tg_if1}
| | ... | ${src_ip} | ${tg_to_dut_if1_mac}
-| | Honeycomb adds interface ipv4 neighbor | ${dut_node} | ${dut_to_tg_if2}
+| | Honeycomb adds interface IPv4 neighbor | ${dut_node} | ${dut_to_tg_if2}
| | ... | ${next_hop} | ${tg_to_dut_if2_mac}
| Setup interfaces and neighbors for IPv6 routing test
-| | Path for 2-node testing is set
+| | Configure path in 2-node circular topology
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
| | Import Variables | resources/test_data/honeycomb/routing.py
| | ... | ${nodes['DUT1']} | ipv6 | ${dut_to_tg_if2}
-| | Honeycomb sets interface vrf ID
+| | Honeycomb sets interface VRF ID
| | ... | ${dut_node} | ${dut_to_tg_if1} | ${1} | ipv6
-| | Honeycomb sets interface vrf ID
+| | Honeycomb sets interface VRF ID
| | ... | ${dut_node} | ${dut_to_tg_if2} | ${1} | ipv6
-| | Honeycomb sets interface state | ${dut_node} | ${dut_to_tg_if1} | up
-| | Honeycomb sets interface state | ${dut_node} | ${dut_to_tg_if2} | up
-| | Honeycomb sets interface ipv6 address | ${dut_node}
+| | Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if1} | up
+| | Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if2} | up
+| | Honeycomb sets interface IPv6 address | ${dut_node}
| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip} | ${prefix_len}
-| | Honeycomb sets interface ipv6 address | ${dut_node}
+| | Honeycomb sets interface IPv6 address | ${dut_node}
| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip} | ${prefix_len}
-| | Honeycomb adds interface ipv6 neighbor | ${dut_node} | ${dut_to_tg_if1}
+| | Honeycomb adds interface IPv6 neighbor | ${dut_node} | ${dut_to_tg_if1}
| | ... | ${src_ip} | ${tg_to_dut_if1_mac}
-| | Honeycomb adds interface ipv6 neighbor | ${dut_node} | ${dut_to_tg_if2}
+| | Honeycomb adds interface IPv6 neighbor | ${dut_node} | ${dut_to_tg_if2}
| | ... | ${next_hop} | ${tg_to_dut_if2_mac}
| | Vpp all ra suppress link layer | ${nodes}
@@ -209,7 +209,7 @@
| Setup vrf IDs
| | [Arguments] | ${node} | ${interface} | ${vrf}
-| | Honeycomb sets interface vrf ID
+| | Honeycomb sets interface VRF ID
| | ... | ${node} | ${interface} | ${vrf} | ipv4
-| | Honeycomb sets interface vrf ID
+| | Honeycomb sets interface VRF ID
| | ... | ${node} | ${interface} | ${vrf} | ipv6 \ No newline at end of file
diff --git a/tests/func/honeycomb/mgmt-cfg-slaac-apihc-func.robot b/tests/func/honeycomb/mgmt-cfg-slaac-apihc-func.robot
index 3325a0f9bd..abcd86e95d 100644
--- a/tests/func/honeycomb/mgmt-cfg-slaac-apihc-func.robot
+++ b/tests/func/honeycomb/mgmt-cfg-slaac-apihc-func.robot
@@ -35,7 +35,7 @@
| | Given SLAAC Operational Data From Honeycomb Should Be empty | ${node}
| | ... | ${interface}
| | And InterfaceAPI.Set Interface State | ${node} | ${interface} | up
-| | And Honeycomb sets interface ipv6 address | ${node} | ${interface}
+| | And Honeycomb sets interface IPv6 address | ${node} | ${interface}
| | ... | ${address} | ${prefix}
| | When Honeycomb configures SLAAC | ${node} | ${interface} | ${slaac_data}
| | Then SLAAC Operational Data From Honeycomb Should Be | ${node}
@@ -55,7 +55,7 @@
| | Given SLAAC Operational Data From Honeycomb Should Be empty | ${node}
| | ... | ${interface}
| | And InterfaceAPI.Set Interface State | ${node} | ${interface} | up
-| | And Honeycomb sets interface ipv6 address | ${node} | ${interface}
+| | And Honeycomb sets interface IPv6 address | ${node} | ${interface}
| | ... | ${address} | ${prefix}
| | When Honeycomb configures SLAAC | ${node} | ${interface} | ${slaac_data}
| | Then SLAAC Operational Data From Honeycomb Should Be | ${node}
@@ -68,7 +68,7 @@
| | Given SLAAC Operational Data From Honeycomb Should Be empty | ${node}
| | ... | ${interface}
| | And InterfaceAPI.Set Interface State | ${node} | ${interface} | up
-| | And Honeycomb sets interface ipv6 address | ${node} | ${interface}
+| | And Honeycomb sets interface IPv6 address | ${node} | ${interface}
| | ... | ${address} | ${prefix}
| | When Honeycomb configures SLAAC | ${node} | ${interface} | ${slaac_data_01}
| | Then SLAAC Operational Data From Honeycomb Should Be | ${node} | ${interface}
@@ -81,7 +81,7 @@
| | Given SLAAC Operational Data From Honeycomb Should Be empty | ${node}
| | ... | ${interface}
| | And InterfaceAPI.Set Interface State | ${node} | ${interface} | up
-| | And Honeycomb sets interface ipv6 address | ${node} | ${interface}
+| | And Honeycomb sets interface IPv6 address | ${node} | ${interface}
| | ... | ${address} | ${prefix}
| | When Honeycomb configures SLAAC | ${node} | ${interface} | ${slaac_data_02}
| | Then SLAAC Operational Data From Honeycomb Should Be | ${node} | ${interface}
@@ -94,7 +94,7 @@
| | Given SLAAC Operational Data From Honeycomb Should Be empty | ${node}
| | ... | ${interface}
| | And InterfaceAPI.Set Interface State | ${node} | ${interface} | up
-| | And Honeycomb sets interface ipv6 address | ${node} | ${interface}
+| | And Honeycomb sets interface IPv6 address | ${node} | ${interface}
| | ... | ${address} | ${prefix}
| | When Honeycomb configures SLAAC | ${node} | ${interface} | ${slaac_data_03}
| | Then SLAAC Operational Data From Honeycomb Should Be | ${node} | ${interface}
@@ -107,13 +107,13 @@
| | ... | [Ver] Make TG wait for two IPv6 Router Advertisement packets\
| | ... | to be sent by DUT1 and verify the received RA packets are correct.
| | [Teardown] | SLAAC test teardown | ${dut_node} | ${dut_to_tg_if1}
-| | Given Path for 2-node testing is set
+| | Given Configure path in 2-node circular topology
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
-| | And Honeycomb sets interface ipv6 address
+| | And Honeycomb sets interface IPv6 address
| | ... | ${dut_node} | ${dut_to_tg_if1} | ${address} | ${prefix}
-| | And Honeycomb sets interface state | ${dut_node} | ${dut_to_tg_if1} | up
+| | And Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if1} | up
| | When Honeycomb configures SLAAC | ${dut_node} | ${dut_to_tg_if1}
| | ... | ${slaac_data}
| | :FOR | ${n} | IN RANGE | ${2}
-| | | Then Receive And Check Router Advertisement Packet
+| | | Then Receive and verify router advertisement packet
| | | ... | ${tg_node} | ${tg_to_dut_if1} | ${dut_to_tg_if1_mac} | ${20}
diff --git a/tests/func/honeycomb/mgmt-cfg-spanrx-apihc-apivat-func.robot b/tests/func/honeycomb/mgmt-cfg-spanrx-apihc-apivat-func.robot
index 1cc385ca2b..b2adb871c5 100644
--- a/tests/func/honeycomb/mgmt-cfg-spanrx-apihc-apivat-func.robot
+++ b/tests/func/honeycomb/mgmt-cfg-spanrx-apihc-apivat-func.robot
@@ -34,7 +34,7 @@
| | [Documentation] | Honeycomb configures SPAN on interface and verifies
| | ... | against VPP SPAN dump in state receive.
| | ...
-| | When Honeycomb Configures SPAN on interface
+| | When Honeycomb configures SPAN on interface
| | ... | ${node} | ${interface1} | ${settings_receive}
| | Then Interface SPAN Operational Data from Honeycomb should be
| | ... | ${node} | ${interface1} | ${settings_receive}
@@ -43,7 +43,7 @@
| | [Documentation] | Honeycomb configures SPAN on interface and verifies
| | ... | against VPP SPAN dump in state transmit.
| | ...
-| | When Honeycomb Configures SPAN on interface
+| | When Honeycomb configures SPAN on interface
| | ... | ${node} | ${interface1} | ${settings_transmit}
| | Then Interface SPAN Operational Data from Honeycomb should be
| | ... | ${node} | ${interface1} | ${settings_transmit}
@@ -52,7 +52,7 @@
| | [Documentation] | Honeycomb configures SPAN on interface and verifies
| | ... | against VPP SPAN dump in state both.
| | ...
-| | When Honeycomb Configures SPAN on interface
+| | When Honeycomb configures SPAN on interface
| | ... | ${node} | ${interface1} | ${settings_both}
| | Then Interface SPAN Operational Data from Honeycomb should be
| | ... | ${node} | ${interface1} | ${settings_both}
@@ -61,7 +61,7 @@
| | [Documentation] | Honeycomb configures SPAN on interface and verifies
| | ... | against VPP SPAN dump in state both.
| | ...
-| | When Honeycomb Configures SPAN on interface
+| | When Honeycomb configures SPAN on interface
| | ... | ${node} | ${interface1} | ${settings_both} | ${settings_if2}
| | Then Interface SPAN Operational Data from Honeycomb should be
| | ... | ${node} | ${interface1} | ${settings_both} | ${settings_if2}
@@ -86,9 +86,9 @@
| | ... | ${node} | ${interface1} | AND
| | ... | Honeycomb removes interface SPAN configuration
| | ... | ${node} | ${interface2}
-| | When Honeycomb Configures SPAN on interface
+| | When Honeycomb configures SPAN on interface
| | ... | ${node} | ${interface1} | ${settings_if2}
-| | And Honeycomb Configures SPAN on interface
+| | And Honeycomb configures SPAN on interface
| | ... | ${node} | ${interface2} | ${settings_if2}
| | Then Interface SPAN Operational Data from Honeycomb should be
| | ... | ${node} | ${interface1} | ${settings_if2}
@@ -106,24 +106,24 @@
| | ...
| | [Teardown] | Run Keywords
| | ... | Show Packet Trace on All DUTs | ${nodes} | AND
-| | ... | Honeycomb clears all interface ipv4 neighbors
+| | ... | Honeycomb clears all interface IPv4 neighbors
| | ... | ${dut_node} | ${dut_to_tg_if1} | AND
-| | ... | Honeycomb removes interface ipv4 addresses
+| | ... | Honeycomb removes interface IPv4 addresses
| | ... | ${dut_node} | ${dut_to_tg_if1} | AND
| | ... | Honeycomb removes interface SPAN configuration
| | ... | ${node} | ${dut_to_tg_if2}
-| | Given Path for 2-node testing is set
+| | Given Configure path in 2-node circular topology
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
-| | And Honeycomb sets interface state | ${dut_node} | ${dut_to_tg_if1} | up
-| | And Honeycomb sets interface state | ${dut_node} | ${dut_to_tg_if2} | up
-| | And Honeycomb sets interface ipv4 address with prefix | ${dut_node}
+| | And Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if1} | up
+| | And Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if2} | up
+| | And Honeycomb sets interface IPv4 address with prefix | ${dut_node}
| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip} | ${prefix}
-| | And Honeycomb adds interface ipv4 neighbor | ${dut_node} | ${dut_to_tg_if1}
+| | And Honeycomb adds interface IPv4 neighbor | ${dut_node} | ${dut_to_tg_if1}
| | ... | ${tg_to_dut_if1_ip} | ${tg_to_dut_if1_mac}
| | ${settings_5}= | create dictionary | state=both
| | ... | iface-ref=${dut_to_tg_if1}
| | And InterfaceCLI.All Vpp Interfaces Ready Wait | ${nodes}
-| | When Honeycomb Configures SPAN on interface
+| | When Honeycomb configures SPAN on interface
| | ... | ${node} | ${dut_to_tg_if2} | ${settings_5}
| | Then Send Packet And Check Received Copies | ${tg_node}
| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
@@ -218,17 +218,17 @@
| | ... | on the sub-interface.
| | ...
| | [Teardown] | Show Packet Trace on All DUTs | ${nodes}
-| | Given Path for 2-node testing is set
+| | Given Configure path in 2-node circular topology
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
| | And Sub-interface state from Honeycomb should be
| | ... | ${dut_node} | ${interface1} | ${1} | down | up
-| | And Honeycomb sets interface state | ${dut_node} | ${dut_to_tg_if1} | up
-| | And Honeycomb sets interface state | ${dut_node} | ${dut_to_tg_if2} | up
+| | And Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if1} | up
+| | And Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if2} | up
| | And Honeycomb sets the sub-interface up
| | ... | ${dut_node} | ${dut_to_tg_if1} | ${1}
-| | And Honeycomb sets interface ipv4 address with prefix | ${dut_node}
+| | And Honeycomb sets interface IPv4 address with prefix | ${dut_node}
| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip} | ${prefix}
-| | And And Honeycomb adds interface ipv4 neighbor
+| | And And Honeycomb adds interface IPv4 neighbor
| | ... | ${dut_node} | ${dut_to_tg_if2}
| | ... | ${tg_to_dut_if2_ip} | ${tg_to_dut_if2_mac}
| | ${settings_5}= | create dictionary | state=both
diff --git a/tests/func/honeycomb/mgmt-cfg-vxlan-apihc-apivat-func.robot b/tests/func/honeycomb/mgmt-cfg-vxlan-apihc-apivat-func.robot
index 339fdb8972..409eb13d21 100644
--- a/tests/func/honeycomb/mgmt-cfg-vxlan-apihc-apivat-func.robot
+++ b/tests/func/honeycomb/mgmt-cfg-vxlan-apihc-apivat-func.robot
@@ -49,7 +49,7 @@
| | ... | ${node} | ${vx_interface} | ${vxlan_settings}
| | And VxLAN Operational Data From VAT Should Be
| | ... | ${node} | ${vxlan_settings}
-| | ${vxlan_index}= | Get Interface index from oper data
+| | ${vxlan_index}= | Get interface index from oper data
| | ... | ${node} | ${vx_interface}
| | Set Suite Variable | ${vxlan_index}
diff --git a/tests/func/honeycomb/mgmt-notif-apihcnc-func.robot b/tests/func/honeycomb/mgmt-notif-apihcnc-func.robot
index 3386e1fe60..7daa08bc85 100644
--- a/tests/func/honeycomb/mgmt-notif-apihcnc-func.robot
+++ b/tests/func/honeycomb/mgmt-notif-apihcnc-func.robot
@@ -25,7 +25,7 @@
| Resource | resources/libraries/robot/honeycomb/tap.robot
| Resource | resources/libraries/robot/honeycomb/notifications.robot
| Suite Setup | Run keywords
-| ... | Honeycomb sets interface state
+| ... | Honeycomb configures interface state
| ... | ${node} | ${interface} | down | AND
| ... | Honeycomb creates TAP interface
| ... | ${node} | ${tap_interface} | ${tap_settings}
@@ -41,10 +41,10 @@
| | Given Interface state from Honeycomb should be
| | ... | ${node} | ${interface} | down
| | And Interface state from VAT should be | ${node} | ${interface} | down
-| | And Notification listener is established | ${node}
-| | When Honeycomb sets interface state | ${node} | ${interface} | up
+| | And Notification listener should be established | ${node}
+| | When Honeycomb configures interface state | ${node} | ${interface} | up
| | Then Honeycomb should send interface state notification | ${interface} | up
-| | When Honeycomb sets interface state | ${node} | ${interface} | down
+| | When Honeycomb configures interface state | ${node} | ${interface} | down
| | And Honeycomb should send interface state notification | ${interface} | down
| TC02: Honeycomb sends notification on interface deletion
@@ -54,6 +54,6 @@
| | ... | ${node} | ${tap_interface} | ${tap_settings}
| | And TAP Operational Data From VAT Should Be
| | ... | ${node} | ${tap_interface} | ${tap_settings}
-| | And Notification listener is established | ${node}
+| | And Notification listener should be established | ${node}
| | When Honeycomb removes TAP interface | ${node} | ${tap_interface}
| | Then Honeycomb should send interface deleted notification | ${tap_interface}
diff --git a/tests/func/honeycomb/mgmt-statepersist-apihc-func.robot b/tests/func/honeycomb/mgmt-statepersist-apihc-func.robot
index 5dfa4b5aed..f5f9673230 100644
--- a/tests/func/honeycomb/mgmt-statepersist-apihc-func.robot
+++ b/tests/func/honeycomb/mgmt-statepersist-apihc-func.robot
@@ -33,14 +33,14 @@
# ===================
| TC01: Honeycomb persists configuration through restart of both Honeycomb and VPP
| | [Documentation] | Checks if Honeycomb maintains configuration after both\
-| | ... | Honeycomb and VPP are restarted.
+| | ... | Restart Honeycomb and VPP.
| | [Tags] | HC_FUNC
| | [Teardown]
| | ... | Restart Honeycomb And VPP And Clear Persisted Configuration | ${node}
| | Given Multi-Feature Persistence test configuration | ${node} | ${interface}
| | And Multi-Feature persistence Test Verification | ${node} | ${interface}
| | And Log persisted configuration on node | ${node}
-| | When Honeycomb and VPP are restarted | ${node}
+| | When Restart Honeycomb and VPP | ${node}
| | Then Multi-Feature persistence Test Verification | ${node} | ${interface}
| TC02: Honeycomb reverts to defaults if persistence files are invalid
@@ -62,7 +62,7 @@
| | Given Multi-Feature Persistence test configuration | ${node} | ${interface}
| | And Multi-Feature persistence Test Verification | ${node} | ${interface}
| | And Log persisted configuration on node | ${node}
-| | When Honeycomb is restarted | ${node}
+| | When Restart Honeycomb | ${node}
| | Then Multi-Feature persistence Test Verification | ${node} | ${interface}
| TC04: Honeycomb persists configuration through restart of VPP
@@ -73,7 +73,7 @@
| | Given Multi-Feature Persistence test configuration | ${node} | ${interface}
| | And Multi-Feature persistence Test Verification | ${node} | ${interface}
| | And Log persisted configuration on node | ${node}
-| | When VPP is restarted | ${node}
+| | When Restart VPP | ${node}
| | Then Multi-Feature persistence Test Verification | ${node} | ${interface}
# single-feature cases
@@ -86,7 +86,7 @@
| | ... | Restart Honeycomb And VPP And Clear Persisted Configuration | ${node}
| | Given Interface Persistence Setup | ${node}
| | And Interface Persistence Check | ${node}
-| | When Honeycomb and VPP are restarted | ${node}
+| | When Restart Honeycomb and VPP | ${node}
| | Then Interface Persistence Check | ${node}
| TC06: Persist configuration of IP addresses and neighbors - HC restart
@@ -96,7 +96,7 @@
| | ... | Restart Honeycomb And VPP And Clear Persisted Configuration | ${node}
| | Given Interface Persistence Setup | ${node}
| | And Interface Persistence Check | ${node}
-| | When Honeycomb is restarted | ${node}
+| | When Restart Honeycomb | ${node}
| | Then Interface Persistence Check | ${node}
| TC07: Persist configuration of IP addresses and neighbors - VPP restart
@@ -106,7 +106,7 @@
| | ... | Restart Honeycomb And VPP And Clear Persisted Configuration | ${node}
| | Given Interface Persistence Setup | ${node}
| | And Interface Persistence Check | ${node}
-| | When VPP is restarted | ${node}
+| | When Restart VPP | ${node}
| | Then Interface Persistence Check | ${node}
| TC08: Honeycomb persists configuration of bridge domains - HC and VPP restart
@@ -116,7 +116,7 @@
| | [Teardown]
| | ... | Restart Honeycomb And VPP And Clear Persisted Configuration | ${node}
| | Given Bridge Domain Persistence Setup | ${node}
-| | When Honeycomb and VPP are restarted | ${node}
+| | When Restart Honeycomb and VPP | ${node}
| | Then Bridge Domain Persistence Check | ${node}
| TC09: Honeycomb persists configuration of bridge domains - HC restart
@@ -126,7 +126,7 @@
| | [Teardown]
| | ... | Restart Honeycomb And VPP And Clear Persisted Configuration | ${node}
| | Given Bridge Domain Persistence Setup | ${node}
-| | When Honeycomb is restarted | ${node}
+| | When Restart Honeycomb | ${node}
| | Then Bridge Domain Persistence Check | ${node}
| TC10: Honeycomb persists configuration of bridge domains - VPP restart
@@ -136,7 +136,7 @@
| | [Teardown]
| | ... | Restart Honeycomb And VPP And Clear Persisted Configuration | ${node}
| | Given Bridge Domain Persistence Setup | ${node}
-| | When VPP is restarted | ${node}
+| | When Restart VPP | ${node}
| | Then Bridge Domain Persistence Check | ${node}
#TODO: All other features