aboutsummaryrefslogtreecommitdiffstats
path: root/tests/func/ipsec/ipsec_tunnel_mode_ipv6.robot
diff options
context:
space:
mode:
Diffstat (limited to 'tests/func/ipsec/ipsec_tunnel_mode_ipv6.robot')
-rw-r--r--tests/func/ipsec/ipsec_tunnel_mode_ipv6.robot290
1 files changed, 290 insertions, 0 deletions
diff --git a/tests/func/ipsec/ipsec_tunnel_mode_ipv6.robot b/tests/func/ipsec/ipsec_tunnel_mode_ipv6.robot
new file mode 100644
index 0000000000..1f241197a7
--- /dev/null
+++ b/tests/func/ipsec/ipsec_tunnel_mode_ipv6.robot
@@ -0,0 +1,290 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/ipsec.robot
+| Library | resources.libraries.python.Trace
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | 3_NODE_DOUBLE_LINK_TOPO
+| ... | VM_ENV | HW_ENV
+| Test Setup | Run Keywords | Setup all DUTs before test
+| ... | AND | Setup all TGs before traffic script
+| ... | AND | Setup Topology for IPv6 IPsec testing
+| Test Teardown | Run Keywords | VPP IPsec Show | ${dut_node}
+| ... | AND | Show Packet Trace on All DUTs | ${nodes}
+| ... | AND | Show vpp trace dump on all DUTs
+| Documentation | *IPv6 IPsec tunnel mode test suite.*
+| ...
+| ... | *[Top] Network topologies:* TG-DUT1 2-node topology with one link\
+| ... | between nodes.
+| ... | *[Cfg] DUT configuration:* On DUT1 create loopback interface, configure
+| ... | loopback an physical interface IPv6 addresses, static ARP record, route
+| ... | and IPsec manual keyed connection in tunnel mode.
+| ... | *[Ver] TG verification:* ESP packet is sent from TG to DUT1. ESP packet
+| ... | is received on TG from DUT1.
+| ... | *[Ref] Applicable standard specifications:* RFC4303.
+
+*** Variables ***
+| ${tg_spi}= | ${1000}
+| ${dut_spi}= | ${1001}
+| ${ESP_PROTO}= | ${50}
+| ${tg_if_ip6}= | 3ffe:5f::1
+| ${dut_if_ip6}= | 3ffe:5f::2
+| ${tg_lo_ip6}= | 3ffe:60::3
+| ${dut_lo_ip6}= | 3ffe:60::4
+| ${ip6_plen}= | ${64}
+
+*** Test Cases ***
+| TC01: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA1-96 integrity
+| | [Documentation]
+| | ... | [Top] TG-DUT1.
+| | ... | [Ref] RFC4303.
+| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\
+| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in tunnel mode.
+| | ... | [Ver] Send and receive ESP packet between TG and VPP node.
+| | ${encr_alg}= | Crypto Alg AES CBC 128
+| | ${auth_alg}= | Integ Alg SHA1 96
+| | Given IPsec Generate Keys | ${encr_alg} | ${auth_alg}
+| | When VPP Setup IPsec Manual Keyed Connection
+| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg}
+| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip}
+| | ... | ${dut_tun_ip} | ${tg_tun_ip}
+| | Then Send and Receive IPsec Packet | ${tg_node} | ${tg_if} | ${dut_if_mac}
+| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi}
+| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip}
+| | ... | ${dut_tun_ip}
+
+| TC02: VPP process ESP packet in Tunnel Mode with AES-CBC-192 encryption and SHA1-96 integrity
+| | [Documentation]
+| | ... | [Top] TG-DUT1.
+| | ... | [Ref] RFC4303.
+| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\
+| | ... | algorithm AES-CBC-192 and integrity algorithm SHA1-96 in tunnel mode.
+| | ... | [Ver] Send and receive ESP packet between TG and VPP node.
+| | [Tags] | SKIP_PATCH
+| | ${encr_alg}= | Crypto Alg AES CBC 192
+| | ${auth_alg}= | Integ Alg SHA1 96
+| | Given IPsec Generate Keys | ${encr_alg} | ${auth_alg}
+| | When VPP Setup IPsec Manual Keyed Connection
+| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg}
+| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip}
+| | ... | ${dut_tun_ip} | ${tg_tun_ip}
+| | Then Send and Receive IPsec Packet | ${tg_node} | ${tg_if} | ${dut_if_mac}
+| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi}
+| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip}
+| | ... | ${dut_tun_ip}
+
+| TC03: VPP process ESP packet in Tunnel Mode with AES-CBC-256 encryption and SHA1-96 integrity
+| | [Documentation]
+| | ... | [Top] TG-DUT1.
+| | ... | [Ref] RFC4303.
+| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\
+| | ... | algorithm AES-CBC-256 and integrity algorithm SHA1-96 in tunnel mode.
+| | ... | [Ver] Send and receive ESP packet between TG and VPP node.
+| | [Tags] | SKIP_PATCH
+| | ${encr_alg}= | Crypto Alg AES CBC 256
+| | ${auth_alg}= | Integ Alg SHA1 96
+| | Given IPsec Generate Keys | ${encr_alg} | ${auth_alg}
+| | When VPP Setup IPsec Manual Keyed Connection
+| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg}
+| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip}
+| | ... | ${dut_tun_ip} | ${tg_tun_ip}
+| | Then Send and Receive IPsec Packet | ${tg_node} | ${tg_if} | ${dut_if_mac}
+| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi}
+| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip}
+| | ... | ${dut_tun_ip}
+
+| TC04: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA-256-128 integrity
+| | [Documentation]
+| | ... | [Top] TG-DUT1.
+| | ... | [Ref] RFC4303.
+| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\
+| | ... | algorithm AES-CBC-128 and integrity algorithm SHA-256-128 in tunnel
+| | ... | mode.
+| | ... | [Ver] Send and receive ESP packet between TG and VPP node.
+| | [Tags] | SKIP_PATCH
+| | ${encr_alg}= | Crypto Alg AES CBC 128
+| | ${auth_alg}= | Integ Alg SHA 256 128
+| | Given IPsec Generate Keys | ${encr_alg} | ${auth_alg}
+| | When VPP Setup IPsec Manual Keyed Connection
+| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg}
+| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip}
+| | ... | ${dut_tun_ip} | ${tg_tun_ip}
+| | Then Send and Receive IPsec Packet | ${tg_node} | ${tg_if} | ${dut_if_mac}
+| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi}
+| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip}
+| | ... | ${dut_tun_ip}
+
+| TC05: VPP process ESP packet in Tunnel Mode with AES-CBC-192 encryption and SHA-256-128 integrity
+| | [Documentation]
+| | ... | [Top] TG-DUT1.
+| | ... | [Ref] RFC4303.
+| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\
+| | ... | algorithm AES-CBC-192 and integrity algorithm SHA-256-128 in tunnel
+| | ... | mode.
+| | ... | [Ver] Send and receive ESP packet between TG and VPP node.
+| | ${encr_alg}= | Crypto Alg AES CBC 192
+| | ${auth_alg}= | Integ Alg SHA 256 128
+| | Given IPsec Generate Keys | ${encr_alg} | ${auth_alg}
+| | When VPP Setup IPsec Manual Keyed Connection
+| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg}
+| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip}
+| | ... | ${dut_tun_ip} | ${tg_tun_ip}
+| | Then Send and Receive IPsec Packet | ${tg_node} | ${tg_if} | ${dut_if_mac}
+| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi}
+| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip}
+| | ... | ${dut_tun_ip}
+
+| TC06: VPP process ESP packet in Tunnel Mode with AES-CBC-256 encryption and SHA-256-128 integrity
+| | [Documentation]
+| | ... | [Top] TG-DUT1.
+| | ... | [Ref] RFC4303.
+| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\
+| | ... | algorithm AES-CBC-256 and integrity algorithm SHA-256-128 in tunnel
+| | ... | mode.
+| | ... | [Ver] Send and receive ESP packet between TG and VPP node.
+| | [Tags] | SKIP_PATCH
+| | ${encr_alg}= | Crypto Alg AES CBC 256
+| | ${auth_alg}= | Integ Alg SHA 256 128
+| | Given IPsec Generate Keys | ${encr_alg} | ${auth_alg}
+| | When VPP Setup IPsec Manual Keyed Connection
+| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg}
+| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip}
+| | ... | ${dut_tun_ip} | ${tg_tun_ip}
+| | Then Send and Receive IPsec Packet | ${tg_node} | ${tg_if} | ${dut_if_mac}
+| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi}
+| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip}
+| | ... | ${dut_tun_ip}
+
+| TC07: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA-384-192 integrity
+| | [Documentation]
+| | ... | [Top] TG-DUT1.
+| | ... | [Ref] RFC4303.
+| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\
+| | ... | algorithm AES-CBC-128 and integrity algorithm SHA-384-192 in tunnel
+| | ... | mode.
+| | ... | [Ver] Send and receive ESP packet between TG and VPP node.
+| | [Tags] | SKIP_PATCH
+| | ${encr_alg}= | Crypto Alg AES CBC 128
+| | ${auth_alg}= | Integ Alg SHA 384 192
+| | Given IPsec Generate Keys | ${encr_alg} | ${auth_alg}
+| | When VPP Setup IPsec Manual Keyed Connection
+| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg}
+| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip}
+| | ... | ${dut_tun_ip} | ${tg_tun_ip}
+| | Then Send and Receive IPsec Packet | ${tg_node} | ${tg_if} | ${dut_if_mac}
+| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi}
+| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip}
+| | ... | ${dut_tun_ip}
+
+| TC08: VPP process ESP packet in Tunnel Mode with AES-CBC-192 encryption and SHA-384-192 integrity
+| | [Documentation]
+| | ... | [Top] TG-DUT1.
+| | ... | [Ref] RFC4303.
+| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\
+| | ... | algorithm AES-CBC-192 and integrity algorithm SHA-384-192 in tunnel
+| | ... | mode.
+| | ... | [Ver] Send and receive ESP packet between TG and VPP node.
+| | [Tags] | SKIP_PATCH
+| | ${encr_alg}= | Crypto Alg AES CBC 192
+| | ${auth_alg}= | Integ Alg SHA 384 192
+| | Given IPsec Generate Keys | ${encr_alg} | ${auth_alg}
+| | When VPP Setup IPsec Manual Keyed Connection
+| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg}
+| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip}
+| | ... | ${dut_tun_ip} | ${tg_tun_ip}
+| | Then Send and Receive IPsec Packet | ${tg_node} | ${tg_if} | ${dut_if_mac}
+| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi}
+| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip}
+| | ... | ${dut_tun_ip}
+
+| TC09: VPP process ESP packet in Tunnel Mode with AES-CBC-256 encryption and SHA-384-192 integrity
+| | [Documentation]
+| | ... | [Top] TG-DUT1.
+| | ... | [Ref] RFC4303.
+| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\
+| | ... | algorithm AES-CBC-256 and integrity algorithm SHA-384-192 in tunnel
+| | ... | mode.
+| | ... | [Ver] Send and receive ESP packet between TG and VPP node.
+| | ${encr_alg}= | Crypto Alg AES CBC 256
+| | ${auth_alg}= | Integ Alg SHA 384 192
+| | Given IPsec Generate Keys | ${encr_alg} | ${auth_alg}
+| | When VPP Setup IPsec Manual Keyed Connection
+| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg}
+| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip}
+| | ... | ${dut_tun_ip} | ${tg_tun_ip}
+| | Then Send and Receive IPsec Packet | ${tg_node} | ${tg_if} | ${dut_if_mac}
+| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi}
+| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip}
+| | ... | ${dut_tun_ip}
+
+| TC10: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA-512-256 integrity
+| | [Documentation]
+| | ... | [Top] TG-DUT1.
+| | ... | [Ref] RFC4303.
+| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\
+| | ... | algorithm AES-CBC-128 and integrity algorithm SHA-512-256 in tunnel
+| | ... | mode.
+| | ... | [Ver] Send and receive ESP packet between TG and VPP node.
+| | [Tags] | SKIP_PATCH
+| | ${encr_alg}= | Crypto Alg AES CBC 128
+| | ${auth_alg}= | Integ Alg SHA 512 256
+| | Given IPsec Generate Keys | ${encr_alg} | ${auth_alg}
+| | When VPP Setup IPsec Manual Keyed Connection
+| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg}
+| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip}
+| | ... | ${dut_tun_ip} | ${tg_tun_ip}
+| | Then Send and Receive IPsec Packet | ${tg_node} | ${tg_if} | ${dut_if_mac}
+| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi}
+| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip}
+| | ... | ${dut_tun_ip}
+
+| TC11: VPP process ESP packet in Tunnel Mode with AES-CBC-192 encryption and SHA-512-256 integrity
+| | [Documentation]
+| | ... | [Top] TG-DUT1.
+| | ... | [Ref] RFC4303.
+| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\
+| | ... | algorithm AES-CBC-192 and integrity algorithm SHA-512-256 in tunnel
+| | ... | mode.
+| | ... | [Ver] Send and receive ESP packet between TG and VPP node.
+| | [Tags] | SKIP_PATCH
+| | ${encr_alg}= | Crypto Alg AES CBC 192
+| | ${auth_alg}= | Integ Alg SHA 512 256
+| | Given IPsec Generate Keys | ${encr_alg} | ${auth_alg}
+| | When VPP Setup IPsec Manual Keyed Connection
+| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg}
+| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip}
+| | ... | ${dut_tun_ip} | ${tg_tun_ip}
+| | Then Send and Receive IPsec Packet | ${tg_node} | ${tg_if} | ${dut_if_mac}
+| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi}
+| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip}
+| | ... | ${dut_tun_ip}
+
+| TC12: VPP process ESP packet in Tunnel Mode with AES-CBC-256 encryption and SHA-512-256 integrity
+| | [Documentation]
+| | ... | [Top] TG-DUT1.
+| | ... | [Ref] RFC4303.
+| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\
+| | ... | algorithm AES-CBC-256 and integrity algorithm SHA-512-256 in tunnel
+| | ... | mode.
+| | ... | [Ver] Send and receive ESP packet between TG and VPP node.
+| | ${encr_alg}= | Crypto Alg AES CBC 256
+| | ${auth_alg}= | Integ Alg SHA 512 256
+| | Given IPsec Generate Keys | ${encr_alg} | ${auth_alg}
+| | When VPP Setup IPsec Manual Keyed Connection
+| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg}
+| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip}
+| | ... | ${dut_tun_ip} | ${tg_tun_ip}
+| | Then Send and Receive IPsec Packet | ${tg_node} | ${tg_if} | ${dut_if_mac}
+| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi}
+| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip}
+| | ... | ${dut_tun_ip}