aboutsummaryrefslogtreecommitdiffstats
path: root/tests/func/ipv6
diff options
context:
space:
mode:
Diffstat (limited to 'tests/func/ipv6')
-rw-r--r--tests/func/ipv6/eth2p-ethip6-ip6base-func.robot120
-rw-r--r--tests/func/ipv6/eth2p-ethip6-ip6base-ip6ecmp-func.robot73
-rw-r--r--tests/func/ipv6/eth2p-ethip6-ip6base-ip6ra-func.robot107
3 files changed, 300 insertions, 0 deletions
diff --git a/tests/func/ipv6/eth2p-ethip6-ip6base-func.robot b/tests/func/ipv6/eth2p-ethip6-ip6base-func.robot
new file mode 100644
index 0000000000..6048daad67
--- /dev/null
+++ b/tests/func/ipv6/eth2p-ethip6-ip6base-func.robot
@@ -0,0 +1,120 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Library | resources.libraries.python.Trace
+| Resource | resources/libraries/robot/interfaces.robot
+| Resource | resources/libraries/robot/ipv6.robot
+| Resource | resources/libraries/robot/counters.robot
+| Resource | resources/libraries/robot/default.robot
+| Variables | resources/libraries/python/IPv6NodesAddr.py | ${nodes}
+| Force Tags | HW_ENV
+| Suite Setup | Run Keywords
+| ... | Setup ipv6 to all dut in topology | ${nodes} | ${nodes_ipv6_addr} | AND
+| ... | Vpp nodes ra suppress link layer | ${nodes} | AND
+| ... | Vpp nodes setup ipv6 routing | ${nodes} | ${nodes_ipv6_addr} | AND
+| ... | Setup all TGs before traffic script
+| Test Setup | Run Keywords | Save VPP PIDs | AND
+| ... | Clear interface counters on all vpp nodes in topology | ${nodes}
+| Test Teardown | Run Keywords
+| ... | Show packet trace on all DUTs | ${nodes} | AND
+| ... | Show vpp trace dump on all DUTs | AND
+| ... | Check VPP PID in Teardown
+| Documentation | *IPv6 routing test cases*
+| ...
+| ... | RFC2460 IPv6, RFC4443 ICMPv6, RFC4861 Neighbor Discovery.
+| ... | Encapsulations: Eth-IPv6-ICMPv6 on links TG-DUT1, TG-DUT2, DUT1-DUT2;
+| ... | Eth-IPv6-NS/NA on links TG-DUT. IPv6 routing tests use circular 3-node
+| ... | topology TG - DUT1 - DUT2 - TG with one link between the nodes. DUT1 and
+| ... | DUT2 are configured with IPv6 routing and static routes. Test ICMPv6
+| ... | Echo Request packets are sent in both directions by TG on links to DUT1
+| ... | and DUT2 and received on TG links on the other side of circular
+| ... | topology. On receive TG verifies packets IPv6 src-addr, dst-addr and MAC
+| ... | addresses.
+
+*** Test Cases ***
+| TC01: DUT replies to ICMPv6 Echo Req to its ingress interface
+| | [Documentation]
+| | ... | Make TG send ICMPv6 Echo Req to DUT ingress interface. Make TG\
+| | ... | verify ICMPv6 Echo Reply is correct.
+| | [Tags] | 3_NODE_SINGLE_LINK_TOPO | VM_ENV
+| | Ipv6 icmp echo | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes_ipv6_addr}
+
+| TC02: DUT replies to ICMPv6 Echo Req pkt with size 64B-to-1500B-incr-1B
+| | [Documentation]
+| | ... | Make TG send ICMPv6 Echo Reqs to DUT ingress interface,\
+| | ... | incrementating frame size from 64B to 1500B with increment step
+| | ... | of 1Byte. Make TG verify ICMP Echo Replies are correct.
+| | [Tags] | 3_NODE_SINGLE_LINK_TOPO | VM_ENV
+| | Ipv6 icmp echo sweep | ${nodes['TG']} | ${nodes['DUT1']} | 0 | 1452 | 1 | ${nodes_ipv6_addr}
+
+| TC03: DUT replies to ICMPv6 Echo Req pkt with size 1500B-to-9000B-incr-10B
+| | [Documentation]
+| | ... | Make TG send ICMPv6 Echo Reqs to DUT ingress interface,\
+| | ... | incrementating frame size from 1500B to 9000B with increment
+| | ... | step of 10Bytes. Make TG verify ICMPv6 Echo Replies are correct.
+| | [Tags] | 3_NODE_SINGLE_LINK_TOPO
+| | [Setup] | Setup MTU on TG based on MTU on DUT | ${nodes['TG']} | ${nodes['DUT1']}
+| | [Teardown] | Run keywords
+| | ... | Set default Ethernet MTU on all interfaces on node | ${nodes['TG']}
+| | ... | AND | Check VPP PID in Teardown
+| | Append Nodes | ${nodes['TG']} | ${nodes['DUT1']}
+| | Compute Path
+| | ${dut_port} | ${dut_node}= | Last Interface
+| | ${mtu}= | Get Interface MTU | ${dut_node} | ${dut_port}
+| | # ICMPv6 payload size is frame size minus size of Ehternet header, FCS,
+| | # IPv6 header and ICMPv6 header
+| | ${end_size}= | Evaluate | ${mtu} - 14 - 4 - 40 - 8
+| | Run Keyword If | ${mtu} > 1518
+| | ... | Ipv6 icmp echo sweep | ${nodes['TG']} | ${nodes['DUT1']}
+| | ... | 1452 | ${end_size} | 10 | ${nodes_ipv6_addr}
+
+| TC04: DUT routes to its egress interface
+| | [Documentation]
+| | ... | Make TG send ICMPv6 Echo Req towards DUT1 egress interface\
+| | ... | connected to DUT2. Make TG verify ICMPv6 Echo Reply is correct.
+| | [Tags] | 3_NODE_SINGLE_LINK_TOPO | VM_ENV
+| | Ipv6 tg to dut1 egress | ${nodes['TG']} | ${nodes['DUT1']} |
+| | ... | ${nodes['DUT2']} | ${nodes_ipv6_addr}
+
+| TC05: DUT1 routes to DUT2 ingress interface
+| | [Documentation]
+| | ... | Make TG send ICMPv6 Echo Req towards DUT2 ingress interface\
+| | ... | connected to DUT1. Make TG verify ICMPv6 Echo Reply is correct.
+| | [Tags] | 3_NODE_SINGLE_LINK_TOPO | VM_ENV
+| | Ipv6 tg to dut2 via dut1 | ${nodes['TG']} | ${nodes['DUT1']}
+| | ... | ${nodes['DUT2']} | ${nodes_ipv6_addr}
+
+| TC06: DUT1 routes to DUT2 egress interface
+| | [Documentation]
+| | ... | Make TG send ICMPv6 Echo Req towards DUT2 egress interface\
+| | ... | connected to TG. Make TG verify ICMPv6 Echo Reply is correct.
+| | [Tags] | 3_NODE_SINGLE_LINK_TOPO | VM_ENV
+| | Ipv6 tg to dut2 egress via dut1 | ${nodes['TG']} | ${nodes['DUT1']}
+| | ... | ${nodes['DUT2']} | ${nodes_ipv6_addr}
+
+| TC07: DUT1 and DUT2 route between TG interfaces
+| | [Documentation]
+| | ... | Make TG send ICMPv6 Echo Req between its interfaces across DUT1\
+| | ... | and DUT2. Make TG verify ICMPv6 Echo Replies are correct.
+| | [Tags] | 3_NODE_SINGLE_LINK_TOPO | VM_ENV
+| | Ipv6 tg to tg routed | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']}
+| | ... | ${nodes_ipv6_addr}
+
+| TC08: DUT replies to IPv6 Neighbor Solicitation
+| | [Documentation]
+| | ... | On DUT configure interface IPv6 address in the main routing\
+| | ... | domain. Make TG send Neighbor Solicitation message on the link
+| | ... | to DUT and verify DUT Neighbor Advertisement reply is correct.
+| | [Tags] | 3_NODE_SINGLE_LINK_TOPO | VM_ENV
+| | Ipv6 neighbor solicitation | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes_ipv6_addr}
diff --git a/tests/func/ipv6/eth2p-ethip6-ip6base-ip6ecmp-func.robot b/tests/func/ipv6/eth2p-ethip6-ip6base-ip6ecmp-func.robot
new file mode 100644
index 0000000000..fddf3a98a8
--- /dev/null
+++ b/tests/func/ipv6/eth2p-ethip6-ip6base-ip6ecmp-func.robot
@@ -0,0 +1,73 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+
+*** Settings ***
+| Resource | resources/libraries/robot/default.robot
+| Resource | resources/libraries/robot/counters.robot
+| Resource | resources/libraries/robot/interfaces.robot
+| Resource | resources/libraries/robot/testing_path.robot
+| Resource | resources/libraries/robot/ipv6.robot
+| Resource | resources/libraries/robot/traffic.robot
+| Library | resources.libraries.python.Trace
+| Force Tags | HW_ENV | VM_ENV | 3_NODE_DOUBLE_LINK_TOPO
+| Test Setup | Func Test Setup
+| Test Teardown | Func Test Teardown
+| Documentation | *Ipv6 Multipath routing test cases*
+| ...
+| ... | *[Top] Network topologies:* TG=DUT 2-node topology with two links\
+| ... | between nodes.
+| ... | *[Cfg] DUT configuration:* On DUT configure interfaces IPv4 adresses,\
+| ... | and multipath routing.
+| ... | *[Ver] TG verification:* Test packets are sent from TG on the first\
+| ... | link to DUT. Packet is received on TG on the second link from DUT1.
+
+*** Variables ***
+| ${ip_1}= | 3ffe:61::1
+| ${ip_2}= | 3ffe:62::1
+| ${test_dst_ip}= | 3ffe:71::1
+| ${test_src_ip}= | 3ffe:51::1
+| ${prefix_length}= | 64
+| ${neighbor_1_ip}= | 3ffe:62::2
+| ${neighbor_1_mac}= | 02:00:00:00:00:02
+| ${neighbor_2_ip}= | 3ffe:62::3
+| ${neighbor_2_mac}= | 02:00:00:00:00:03
+
+*** Test Cases ***
+| TC01: IPv6 Equal-cost multipath routing
+| | [Documentation]
+| | ... | [Top] TG=DUT
+| | ... | [Cfg] On DUT configure multipath routing wiht two equal-cost paths.
+| | ... | [Ver] TG sends 100 IPv6 ICMP packets traffic on the first link to\
+| | ... | DUT. On second link to TG verify if traffic is divided into two paths.
+| | Given Path for 2-node testing is set
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
+| | And Interfaces in 2-node path are UP
+| | And Vpp Set If Ipv6 Addr | ${dut_node}
+| | ... | ${dut_to_tg_if2} | ${ip_1} | ${prefix_length}
+| | And Vpp Set If Ipv6 Addr | ${dut_node}
+| | ... | ${dut_to_tg_if1} | ${ip_2} | ${prefix_length}
+| | And Add Ip Neighbor
+| | ... | ${dut_node} | ${dut_to_tg_if1} | ${neighbor_1_ip} | ${neighbor_1_mac}
+| | And Add Ip Neighbor
+| | ... | ${dut_node} | ${dut_to_tg_if1} | ${neighbor_2_ip} | ${neighbor_2_mac}
+| | When Vpp Route Add
+| | ... | ${dut_node} | ${test_dst_ip} | ${prefix_length} | ${neighbor_1_ip}
+| | ... | ${dut_to_tg_if1} | resolve_attempts=${NONE} | multipath=${TRUE}
+| | And Vpp Route Add
+| | ... | ${dut_node} | ${test_dst_ip} | ${prefix_length} | ${neighbor_2_ip}
+| | ... | ${dut_to_tg_if1} | resolve_attempts=${NONE} | multipath=${TRUE}
+| | Then Send Packets And Check Multipath Routing | ${tg_node}
+| | ... | ${tg_to_dut_if2} | ${tg_to_dut_if1} | ${test_src_ip} | ${test_dst_ip}
+| | ... | ${tg_to_dut_if2_mac} | ${dut_to_tg_if2_mac} | ${dut_to_tg_if1_mac}
+| | ... | ${neighbor_1_mac} | ${neighbor_2_mac}
diff --git a/tests/func/ipv6/eth2p-ethip6-ip6base-ip6ra-func.robot b/tests/func/ipv6/eth2p-ethip6-ip6base-ip6ra-func.robot
new file mode 100644
index 0000000000..e45ce730c9
--- /dev/null
+++ b/tests/func/ipv6/eth2p-ethip6-ip6base-ip6ra-func.robot
@@ -0,0 +1,107 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/default.robot
+| Resource | resources/libraries/robot/counters.robot
+| Resource | resources/libraries/robot/interfaces.robot
+| Resource | resources/libraries/robot/testing_path.robot
+| Resource | resources/libraries/robot/ipv6.robot
+| Resource | resources/libraries/robot/traffic.robot
+| Library | resources.libraries.python.Trace
+| Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO
+| Test Setup | Func Test Setup
+| Test Teardown | Func Test Teardown
+| Documentation | *IPv6 Router Advertisement test cases*
+| ...
+| ... | RFC4861 Neighbor Discovery. Encapsulations: Eth-IPv6-RA on links
+| ... | TG-DUT1. IPv6 Router Advertisement tests use 3-node topology TG - DUT1 -
+| ... | DUT2 - TG with one link between the nodes. DUT1 and DUT2 are configured
+| ... | with IPv6 routing and static routes. TG verifies received RA packets.
+
+
+*** Variables ***
+| ${dut1_to_tg_ip}= | 3ffe:62::1
+| ${tg_to_dut1_ip}= | 3ffe:62::2
+| ${prefix_length}= | 64
+| ${interval}= | 2
+
+*** Test Cases ***
+| TC01: DUT transmits RA on IPv6 enabled interface
+| | [Documentation]
+| | ... | [Top] TG-DUT1-DUT2-TG.
+| | ... | [Cfg] On DUT1 configure IPv6 interface on the link to TG.
+| | ... | [Ver] Make TG wait for IPv6 Router Advertisement packet to be sent\
+| | ... | by DUT1 and verify the received RA packet is correct.
+| | [Tags] | EXPECTED_FAILING
+| | Given Path For 3-node Testing Is Set
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Interfaces In 3-node Path Are Up
+| | And Vpp Set If Ipv6 Addr | ${dut1_node}
+| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
+| | When Vpp RA Send After Interval | ${dut1_node} | ${dut1_to_tg}
+| | Then Receive And Check Router Advertisement Packet
+| | ... | ${tg_node} | ${tg_to_dut1} | ${dut1_to_tg_mac}
+
+| TC02: DUT retransmits RA on IPv6 enabled interface after a set interval
+| | [Documentation]
+| | ... | [Top] TG-DUT1-DUT2-TG.
+| | ... | [Cfg] On DUT1 configure IPv6 interface on the link to TG.
+| | ... | [Ver] Make TG wait for two IPv6 Router Advertisement packets\
+| | ... | to be sent by DUT1 and verify the received RA packets are correct.
+| | [Tags] | EXPECTED_FAILING
+| | Given Path For 3-node Testing Is Set
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Interfaces In 3-node Path Are Up
+| | And Vpp Set If Ipv6 Addr | ${dut1_node}
+| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
+| | When Vpp RA Send After Interval | ${dut1_node} | ${dut1_to_tg}
+| | ... | interval=${interval}
+| | :FOR | ${n} | IN RANGE | ${2}
+| | | Then Receive And Check Router Advertisement Packet
+| | | ... | ${tg_node} | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${interval}
+
+| TC03: DUT responds to Router Solicitation request
+| | [Documentation]
+| | ... | [Top] TG-DUT1-DUT2-TG.
+| | ... | [Cfg] On DUT1 configure IPv6 interface on the link to TG and suppress\
+| | ... | sending of Router Advertisement packets periodically.
+| | ... | [Ver] Make TG send IPv6 Router Solicitation request to DUT1, listen\
+| | ... | for response from DUT1 and verify the received RA packet is correct.
+| | [Tags] | EXPECTED_FAILING
+| | Given Path For 3-node Testing Is Set
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Interfaces In 3-node Path Are Up
+| | And Vpp Set If Ipv6 Addr | ${dut1_node}
+| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
+| | When VPP RA Suppress Link Layer | ${dut1_node} | ${dut1_to_tg}
+| | Then Send Router Solicitation And Check Response
+| | ... | ${tg_node} | ${dut1_node} | ${tg_to_dut1} | ${dut1_to_tg}
+| | ... | ${tg_to_dut1_ip}
+
+| TC04: DUT responds to Router Solicitation request sent from link local address
+| | [Documentation]
+| | ... | [Top] TG-DUT1-DUT2-TG.
+| | ... | [Cfg] On DUT1 configure IPv6 interface on the link to TG and suppress\
+| | ... | sending of Router Advertisement packets periodically.
+| | ... | [Ver] Make TG send IPv6 Router Solicitation request to DUT1, listen\
+| | ... | for response from DUT1 and verify the received RA packet is correct.
+| | [Tags] | EXPECTED_FAILING
+| | Given Path For 3-node Testing Is Set
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Interfaces In 3-node Path Are Up
+| | And Vpp Set If Ipv6 Addr | ${dut1_node}
+| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
+| | When VPP RA Suppress Link Layer | ${dut1_node} | ${dut1_to_tg}
+| | Then Send Router Solicitation And Check Response
+| | ... | ${tg_node} | ${dut1_node} | ${tg_to_dut1} | ${dut1_to_tg}