diff options
Diffstat (limited to 'tests/func/l2_xconnect')
| -rw-r--r-- | tests/func/l2_xconnect/l2_xconnect_untagged.robot | 137 |
1 files changed, 0 insertions, 137 deletions
diff --git a/tests/func/l2_xconnect/l2_xconnect_untagged.robot b/tests/func/l2_xconnect/l2_xconnect_untagged.robot deleted file mode 100644 index 2554007cef..0000000000 --- a/tests/func/l2_xconnect/l2_xconnect_untagged.robot +++ /dev/null @@ -1,137 +0,0 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/default.robot -| Resource | resources/libraries/robot/l2_xconnect.robot -| Resource | resources/libraries/robot/l2_traffic.robot -| Resource | resources/libraries/robot/testing_path.robot -| Resource | resources/libraries/robot/interfaces.robot -| Resource | resources/libraries/robot/bridge_domain.robot -| Resource | resources/libraries/robot/qemu.robot -| Library | resources.libraries.python.Trace -| Library | resources.libraries.python.NodePath -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | HW_ENV | VM_ENV -| Test Setup | Func Test Setup -| Test Teardown | Func Test Teardown -| Documentation | *L2 cross-connect test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology with -| ... | single links between nodes; TG=DUT1=DUT2=TG 3-node circular topology -| ... | with double parallel links and TG=DUT=VM 3-node topology with VM and -| ... | double parallel links. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for L2 switching of IPv4; -| ... | Eth-IPv6-ICMPv6 for L2 switching of IPv6 use. Both apply to all links. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 -| ... | cross-connect (L2XC) switching. -| ... | *[Ver] TG verification:* Test ICMPv4 (or ICMPv6) Echo Request packets are -| ... | sent in both directions by TG on links to DUT1 and DUT2; on receive TG -| ... | verifies packets for correctness and their IPv4 (IPv6) src-addr, -| ... | dst-addr and MAC addresses. -| ... | *[Ref] Applicable standard specifications:* - -*** Variables *** -| ${sock1}= | /tmp/sock1 -| ${sock2}= | /tmp/sock2 - -*** Test Cases *** -| TC01: DUT1 and DUT2 with L2XC switch ICMPv4 between two TG links -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT1 and \ -| | ... | DUT2 configure L2 cross-connect (L2XC), each with one interface -| | ... | to TG and one Ethernet interface towards the other DUT. [Ver] -| | ... | Make TG send ICMPv4 Echo Req in both directions between two of -| | ... | its interfaces to be switched by DUT1 and DUT2; verify all -| | ... | packets are received. [Ref] -| | Given Path for 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in 3-node path are up -| | And L2 setup xconnect on DUT -| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_dut2} -| | And L2 setup xconnect on DUT -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg} -| | When All Vpp Interfaces Ready Wait | ${nodes} -| | Then Send and receive ICMPv4 bidirectionally -| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} - -| TC02: DUT1 and DUT2 with L2XC switch ICMPv6 between two TG links -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv6-ICMPv6. [Cfg] On DUT1 and \ -| | ... | DUT2 configure L2 cross-connect (L2XC), each with one interface -| | ... | to TG and one Ethernet interface towards the other DUT. [Ver] -| | ... | Make TG send ICMPv6 Echo Req in both directions between two of -| | ... | its interfaces to be switched by DUT1 and DUT2; verify all -| | ... | packets are received. [Ref] -| | Given Path for 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in 3-node path are up -| | And L2 setup xconnect on DUT -| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_dut2} -| | And L2 setup xconnect on DUT -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg} -| | When All Vpp Interfaces Ready Wait | ${nodes} -| | Then Send and receive ICMPv6 bidirectionally -| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} - -| TC03: DUT with two L2XCs switches ICMPv4 between TG and local VM links -| | [Documentation] -| | ... | [Top] TG=DUT=VM. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT configure \ -| | ... | two L2 cross-connects (L2XC), each with one untagged interface -| | ... | to TG and untagged i/f to local VM over vhost-user. [Ver] Make -| | ... | TG send ICMPv4 Echo Reqs in both directions between two of its -| | ... | i/fs to be switched by DUT to and from VM; verify all packets -| | ... | are received. [Ref] -| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO | VPP_VM_ENV -| | Given Path for 2-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Interfaces in 2-node path are up -| | When VPP Vhost interfaces for L2BD forwarding are setup | ${dut_node} -| | ... | ${sock1} -| | ... | ${sock2} -| | And L2 Setup Xconnect on DUT | ${dut_node} | ${dut_to_tg_if1} | ${vhost_if1} -| | And L2 Setup Xconnect on DUT | ${dut_node} | ${dut_to_tg_if2} | ${vhost_if2} -| | And VM for Vhost L2BD forwarding is setup | ${dut_node} | ${sock1} -| | ... | ${sock2} -| | Then Send and receive ICMPv4 bidirectionally | ${tg_node} | ${tg_to_dut_if1} -| | ... | ${tg_to_dut_if2} -| | [Teardown] | Run Keywords | Show Packet Trace on All DUTs | ${nodes} -| | ... | AND | Stop and Clear QEMU | ${dut_node} | ${vm_node} -| | ... | AND | Show vpp trace dump on all DUTs -| | ... | AND | Check VPP PID in Teardown - -| TC04: DUT with two L2XCs switches ICMPv6 between TG and local VM links -| | [Documentation] -| | ... | [Top] TG=DUT=VM. [Enc] Eth-IPv6-ICMPv6. [Cfg] On DUT configure \ -| | ... | two L2 cross-connects (L2XC), each with one untagged i/f to TG -| | ... | and untagged i/f to local VM over vhost-user. [Ver] Make TG send -| | ... | ICMPv6 Echo Reqs in both directions between two of its i/fs to -| | ... | be switched by DUT to and from VM; verify all packets are -| | ... | received. [Ref] -| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO | VPP_VM_ENV -| | Given Path for 2-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Interfaces in 2-node path are up -| | When VPP Vhost interfaces for L2BD forwarding are setup | ${dut_node} -| | ... | ${sock1} -| | ... | ${sock2} -| | And L2 Setup Xconnect on DUT | ${dut_node} | ${dut_to_tg_if1} | ${vhost_if1} -| | And L2 Setup Xconnect on DUT | ${dut_node} | ${dut_to_tg_if2} | ${vhost_if2} -| | And VM for Vhost L2BD forwarding is setup | ${dut_node} | ${sock1} -| | ... | ${sock2} -| | Then Send and receive ICMPv6 bidirectionally | ${tg_node} | ${tg_to_dut_if1} -| | ... | ${tg_to_dut_if2} -| | [Teardown] | Run Keywords | Show Packet Trace on All DUTs | ${nodes} -| | ... | AND | Stop and Clear QEMU | ${dut_node} | ${vm_node} -| | ... | AND | Show vpp trace dump on all DUTs -| | ... | AND | Check VPP PID in Teardown - |