aboutsummaryrefslogtreecommitdiffstats
path: root/tests/func/l2_xconnect
diff options
context:
space:
mode:
Diffstat (limited to 'tests/func/l2_xconnect')
-rw-r--r--tests/func/l2_xconnect/l2_xconnect_untagged.robot137
1 files changed, 137 insertions, 0 deletions
diff --git a/tests/func/l2_xconnect/l2_xconnect_untagged.robot b/tests/func/l2_xconnect/l2_xconnect_untagged.robot
new file mode 100644
index 0000000000..05da05308d
--- /dev/null
+++ b/tests/func/l2_xconnect/l2_xconnect_untagged.robot
@@ -0,0 +1,137 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/default.robot
+| Resource | resources/libraries/robot/l2_xconnect.robot
+| Resource | resources/libraries/robot/l2_traffic.robot
+| Resource | resources/libraries/robot/testing_path.robot
+| Resource | resources/libraries/robot/interfaces.robot
+| Resource | resources/libraries/robot/bridge_domain.robot
+| Resource | resources/libraries/robot/qemu.robot
+| Library | resources.libraries.python.Trace
+| Library | resources.libraries.python.NodePath
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | HW_ENV | VM_ENV
+| Test Setup | Setup all DUTs before test
+| Suite Setup | Setup all TGs before traffic script
+| Documentation | *L2 cross-connect test cases*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology with
+| ... | single links between nodes; TG=DUT1=DUT2=TG 3-node circular topology
+| ... | with double parallel links and TG=DUT=VM 3-node topology with VM and
+| ... | double parallel links.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for L2 switching of IPv4;
+| ... | Eth-IPv6-ICMPv6 for L2 switching of IPv6 use. Both apply to all links.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2
+| ... | cross-connect (L2XC) switching.
+| ... | *[Ver] TG verification:* Test ICMPv4 (or ICMPv6) Echo Request packets are
+| ... | sent in both directions by TG on links to DUT1 and DUT2; on receive TG
+| ... | verifies packets for correctness and their IPv4 (IPv6) src-addr,
+| ... | dst-addr and MAC addresses.
+| ... | *[Ref] Applicable standard specifications:*
+
+*** Variables ***
+| ${sock1}= | /tmp/sock1
+| ${sock2}= | /tmp/sock2
+
+*** Test Cases ***
+| TC01: DUT1 and DUT2 with L2XC switch ICMPv4 between two TG links
+| | [Documentation]
+| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT1 and \
+| | ... | DUT2 configure L2 cross-connect (L2XC), each with one interface
+| | ... | to TG and one Ethernet interface towards the other DUT. [Ver]
+| | ... | Make TG send ICMPv4 Echo Req in both directions between two of
+| | ... | its interfaces to be switched by DUT1 and DUT2; verify all
+| | ... | packets are received. [Ref]
+| | Given Path for 3-node testing is set
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Interfaces in 3-node path are up
+| | And L2 setup xconnect on DUT
+| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_dut2}
+| | And L2 setup xconnect on DUT
+| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
+| | When All Vpp Interfaces Ready Wait | ${nodes}
+| | Then Send and receive ICMPv4 bidirectionally
+| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2}
+| | [Teardown] | Run Keyword | Show vpp trace dump on all DUTs
+
+| TC02: DUT1 and DUT2 with L2XC switch ICMPv6 between two TG links
+| | [Documentation]
+| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv6-ICMPv6. [Cfg] On DUT1 and \
+| | ... | DUT2 configure L2 cross-connect (L2XC), each with one interface
+| | ... | to TG and one Ethernet interface towards the other DUT. [Ver]
+| | ... | Make TG send ICMPv6 Echo Req in both directions between two of
+| | ... | its interfaces to be switched by DUT1 and DUT2; verify all
+| | ... | packets are received. [Ref]
+| | Given Path for 3-node testing is set
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Interfaces in 3-node path are up
+| | And L2 setup xconnect on DUT
+| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_dut2}
+| | And L2 setup xconnect on DUT
+| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
+| | When All Vpp Interfaces Ready Wait | ${nodes}
+| | Then Send and receive ICMPv6 bidirectionally
+| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2}
+| | [Teardown] | Run Keyword | Show vpp trace dump on all DUTs
+
+| TC03: DUT with two L2XCs switches ICMPv4 between TG and local VM links
+| | [Documentation]
+| | ... | [Top] TG=DUT=VM. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT configure \
+| | ... | two L2 cross-connects (L2XC), each with one untagged interface
+| | ... | to TG and untagged i/f to local VM over vhost-user. [Ver] Make
+| | ... | TG send ICMPv4 Echo Reqs in both directions between two of its
+| | ... | i/fs to be switched by DUT to and from VM; verify all packets
+| | ... | are received. [Ref]
+| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO | VPP_VM_ENV
+| | Given Path for 2-node testing is set
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
+| | And Interfaces in 2-node path are up
+| | When VPP Vhost interfaces for L2BD forwarding are setup | ${dut_node}
+| | ... | ${sock1}
+| | ... | ${sock2}
+| | And L2 Setup Xconnect on DUT | ${dut_node} | ${dut_to_tg_if1} | ${vhost_if1}
+| | And L2 Setup Xconnect on DUT | ${dut_node} | ${dut_to_tg_if2} | ${vhost_if2}
+| | And VM for Vhost L2BD forwarding is setup | ${dut_node} | ${sock1}
+| | ... | ${sock2}
+| | Then Send and receive ICMPv4 bidirectionally | ${tg_node} | ${tg_to_dut_if1}
+| | ... | ${tg_to_dut_if2}
+| | [Teardown] | Run Keywords | Show Packet Trace on All DUTs | ${nodes}
+| | ... | AND | Stop and Clear QEMU | ${dut_node} | ${vm_node}
+| | ... | AND | Show vpp trace dump on all DUTs
+
+| TC04: DUT with two L2XCs switches ICMPv6 between TG and local VM links
+| | [Documentation]
+| | ... | [Top] TG=DUT=VM. [Enc] Eth-IPv6-ICMPv6. [Cfg] On DUT configure \
+| | ... | two L2 cross-connects (L2XC), each with one untagged i/f to TG
+| | ... | and untagged i/f to local VM over vhost-user. [Ver] Make TG send
+| | ... | ICMPv6 Echo Reqs in both directions between two of its i/fs to
+| | ... | be switched by DUT to and from VM; verify all packets are
+| | ... | received. [Ref]
+| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO | VPP_VM_ENV
+| | Given Path for 2-node testing is set
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
+| | And Interfaces in 2-node path are up
+| | When VPP Vhost interfaces for L2BD forwarding are setup | ${dut_node}
+| | ... | ${sock1}
+| | ... | ${sock2}
+| | And L2 Setup Xconnect on DUT | ${dut_node} | ${dut_to_tg_if1} | ${vhost_if1}
+| | And L2 Setup Xconnect on DUT | ${dut_node} | ${dut_to_tg_if2} | ${vhost_if2}
+| | And VM for Vhost L2BD forwarding is setup | ${dut_node} | ${sock1}
+| | ... | ${sock2}
+| | Then Send and receive ICMPv6 bidirectionally | ${tg_node} | ${tg_to_dut_if1}
+| | ... | ${tg_to_dut_if2}
+| | [Teardown] | Run Keywords | Show Packet Trace on All DUTs | ${nodes}
+| | ... | AND | Stop and Clear QEMU | ${dut_node} | ${vm_node}
+| | ... | AND | Show vpp trace dump on all DUTs
+