diff options
Diffstat (limited to 'tests/func/l2bd')
5 files changed, 0 insertions, 523 deletions
diff --git a/tests/func/l2bd/eth2p-eth-l2bdbasemaclrn-eth-2vhost-1vm-func.robot b/tests/func/l2bd/eth2p-eth-l2bdbasemaclrn-eth-2vhost-1vm-func.robot deleted file mode 100644 index b6a945865f..0000000000 --- a/tests/func/l2bd/eth2p-eth-l2bdbasemaclrn-eth-2vhost-1vm-func.robot +++ /dev/null @@ -1,110 +0,0 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/default.robot -| Resource | resources/libraries/robot/bridge_domain.robot -| Resource | resources/libraries/robot/testing_path.robot -| Resource | resources/libraries/robot/qemu.robot -| Library | resources.libraries.python.Trace -| Force Tags | 3_NODE_DOUBLE_LINK_TOPO | HW_ENV | VM_ENV | VPP_VM_ENV -| Test Setup | Set up functional test -| Test Teardown | Tear down functional test -| Documentation | *L2 bridge-domain test cases* -| ... -| ... | *[Top] Network Topologies:* TG=DUT=VM 3-node topology with VM -| ... | and double parallel links. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for L2 switching of -| ... | IPv4; Eth-IPv6-ICMPv6 for L2 switching of IPv6 use. Both apply -| ... | to all links. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge-domains -| ... | (L2BD) switching combined with MAC learning enabled. -| ... | *[Ver] TG verification:* Test ICMPv4 (or ICMPv6) Echo Request packets -| ... | are sent in both directions by TG on links to DUT1 via VM; on -| ... | receive TG verifies packets for correctness and their IPv4 (IPv6) -| ... | src-addr, dst-addr and MAC addresses. -| ... | *[Ref] Applicable standard specifications:* - -*** Variables *** -| ${bd_id1}= | 1 -| ${bd_id2}= | 2 - -| ${sock1}= | /tmp/sock1 -| ${sock2}= | /tmp/sock2 - -*** Test Cases *** -| TC01: DUT with two L2BDs (MAC learn) switches ICMPv4 between TG and VM links -| | [Documentation] -| | ... | [Top] TG=DUT=VM. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT1 configure \ -| | ... | two L2BDs with MAC learning, each with vhost-user i/f to local -| | ... | VM and i/f to TG; configure VM to loop pkts back betwen its two -| | ... | virtio i/fs. [Ver] Make TG verify ICMPv4 Echo Req pkts are -| | ... | switched thru DUT1 and VM in both directions and are correct on -| | ... | receive. [Ref] -| | ... -| | [Teardown] | Run Keywords | Stop and clear QEMU | ${dut_node} | ${vm_node} -| | ... | AND | Tear down functional test -| | ... -| | Given Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Set interfaces in 2-node circular topology up -| | When Configure vhost interfaces for L2BD forwarding | ${dut_node} -| | ... | ${sock1} -| | ... | ${sock2} -| | And Create bridge domain | ${dut_node} | ${bd_id1} -| | And Add interface to bridge domain | ${dut_node} | ${dut_to_tg_if1} -| | ... | ${bd_id1} -| | And Add interface to bridge domain | ${dut_node} | ${vhost_if1} -| | ... | ${bd_id1} -| | And Create bridge domain | ${dut_node} | ${bd_id2} -| | And Add interface to bridge domain | ${dut_node} | ${dut_to_tg_if2} -| | ... | ${bd_id2} -| | And Add interface to bridge domain | ${dut_node} | ${vhost_if2} -| | ... | ${bd_id2} -| | And Configure VM for vhost L2BD forwarding | ${dut_node} | ${sock1} -| | ... | ${sock2} -| | Then Send ICMPv4 bidirectionally and verify received packets | ${tg_node} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if2} - -| TC02: DUT with two L2BDs (MAC learn) switches ICMPv6 between TG and VM links -| | [Documentation] -| | ... | [Top] TG=DUT=VM. [Enc] Eth-IPv6-ICMPv6. [Cfg] On DUT1 configure \ -| | ... | two L2BDs with MAC learning, each with vhost-user i/f to local -| | ... | VM and i/f to TG; configure VM to loop pkts back betwen its two -| | ... | virtio i/fs. [Ver] Make TG verify ICMPv6 Echo Req pkts are -| | ... | switched thru DUT1 and VM in both directions and are correct on -| | ... | receive. [Ref] -| | ... -| | [Teardown] | Run Keywords | Stop and clear QEMU | ${dut_node} | ${vm_node} -| | ... | AND | Tear down functional test -| | ... -| | Given Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Set interfaces in 2-node circular topology up -| | When Configure vhost interfaces for L2BD forwarding | ${dut_node} -| | ... | ${sock1} -| | ... | ${sock2} -| | And Create bridge domain | ${dut_node} | ${bd_id1} -| | And Add interface to bridge domain | ${dut_node} | ${dut_to_tg_if1} -| | ... | ${bd_id1} -| | And Add interface to bridge domain | ${dut_node} | ${vhost_if1} -| | ... | ${bd_id1} -| | And Create bridge domain | ${dut_node} | ${bd_id2} -| | And Add interface to bridge domain | ${dut_node} | ${dut_to_tg_if2} -| | ... | ${bd_id2} -| | And Add interface to bridge domain | ${dut_node} | ${vhost_if2} -| | ... | ${bd_id2} -| | And Configure VM for vhost L2BD forwarding | ${dut_node} | ${sock1} -| | ... | ${sock2} -| | Then Send ICMPv6 bidirectionally and verify received packets | ${tg_node} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if2} diff --git a/tests/func/l2bd/eth2p-eth-l2bdbasemaclrn-func.robot b/tests/func/l2bd/eth2p-eth-l2bdbasemaclrn-func.robot deleted file mode 100644 index 096c0eb38e..0000000000 --- a/tests/func/l2bd/eth2p-eth-l2bdbasemaclrn-func.robot +++ /dev/null @@ -1,91 +0,0 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/default.robot -| Resource | resources/libraries/robot/bridge_domain.robot -| Resource | resources/libraries/robot/testing_path.robot -| Resource | resources/libraries/robot/qemu.robot -| Resource | resources/libraries/robot/interfaces.robot -| Library | resources.libraries.python.Trace -| Force Tags | HW_ENV | VM_ENV | SKIP_VPP_PATCH -| Test Setup | Set up functional test -| Test Teardown | Tear down functional test -| Documentation | *L2 bridge-domain test cases* -| ... -| ... | *[Top] Network Topologies:* TG=DUT1 2-node topology with two links -| ... | between nodes; TG-DUT1-DUT2-TG 3-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for L2 switching of -| ... | IPv4; Eth-IPv6-ICMPv6 for L2 switching of IPv6 use. Both apply -| ... | to all links. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 -| ... | bridge-domain (L2BD) switching combined with MAC learning enabled. -| ... | *[Ver] TG verification:* Test ICMPv4 (or ICMPv6) Echo Request packets -| ... | are sent in both directions by TG on links to DUT1 and DUT2; on -| ... | receive TG verifies packets for correctness and their IPv4 (IPv6) -| ... | src-addr, dst-addr and MAC addresses. -| ... | *[Ref] Applicable standard specifications:* - -*** Variables *** -| ${bd_id1}= | 1 -| ${bd_id2}= | 2 - -*** Test Cases *** -| TC01: DUT reports active interfaces -| | [Documentation] -| | ... | [Top] TG=DUT1; TG-DUT1-DUT2-TG. [Enc] None. [Cfg] Discovered \ -| | ... | active interfaces. [Ver] Report active interfaces on DUT. [Ref] -| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO | 3_NODE_SINGLE_LINK_TOPO -| | VPP reports interfaces through VAT on '${nodes['DUT1']}' - -| TC02: DUT with L2BD (MAC learning) switch ICMPv4 between two TG links -| | [Documentation] -| | ... | [Top] TG=DUT1. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT1 configure \ -| | ... | two i/fs into L2BD with MAC learning. [Ver] Make TG verify -| | ... | ICMPv4 Echo Req pkts are switched thru DUT1 in both directions -| | ... | and are correct on receive. [Ref] -| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO -| | Given Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Set interfaces in 2-node circular topology up -| | When Create bridge domain | ${dut_node} | ${bd_id1} -| | And Add interface to bridge domain | ${dut_node} | ${dut_to_tg_if1} -| | ... | ${bd_id1} -| | And Add interface to bridge domain | ${dut_node} | ${dut_to_tg_if2} -| | ... | ${bd_id1} -| | Then Send ICMPv4 bidirectionally and verify received packets | ${tg_node} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if2} - -| TC03: DUT1 and DUT2 with L2BD (MAC learning) switch between two TG links -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT1 and DUT2 \ -| | ... | configure two i/fs into L2BD with MAC learning. [Ver] Make TG -| | ... | verify ICMPv4 Echo Req pkts are switched thru DUT1 and DUT2 in -| | ... | both directions and are correct on receive. [Ref] -| | [Tags] | 3_NODE_SINGLE_LINK_TOPO -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | When Create bridge domain | ${dut1_node} | ${bd_id1} -| | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_tg} -| | ... | ${bd_id1} -| | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_dut2} -| | ... | ${bd_id1} -| | And Create bridge domain | ${dut2_node} | ${bd_id2} -| | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_tg} -| | ... | ${bd_id2} -| | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_dut1} -| | ... | ${bd_id2} -| | Then Send ICMPv4 bidirectionally and verify received packets | ${tg_node} -| | ... | ${tg_to_dut1} | ${tg_to_dut2} diff --git a/tests/func/l2bd/eth2p-eth-l2bdbasemacstc-eth-2vhost-1vm-func.robot b/tests/func/l2bd/eth2p-eth-l2bdbasemacstc-eth-2vhost-1vm-func.robot deleted file mode 100644 index 951d522baa..0000000000 --- a/tests/func/l2bd/eth2p-eth-l2bdbasemacstc-eth-2vhost-1vm-func.robot +++ /dev/null @@ -1,151 +0,0 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/default.robot -| Resource | resources/libraries/robot/bridge_domain.robot -| Resource | resources/libraries/robot/testing_path.robot -| Resource | resources/libraries/robot/qemu.robot -| Library | resources.libraries.python.Trace -| Force Tags | 3_NODE_DOUBLE_LINK_TOPO | HW_ENV | VM_ENV | VPP_VM_ENV -| Test Setup | Set up functional test -| Test Teardown | Tear down functional test -| Documentation | *L2 bridge-domain test cases* -| ... -| ... | *[Top] Network Topologies:* TG=DUT=VM 3-node topology with VM -| ... | and double parallel links. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for L2 switching of -| ... | IPv4; Eth-IPv6-ICMPv6 for L2 switching of IPv6 use. Both apply -| ... | to all links. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge-domains -| ... | (L2BD) switching combined with static MACs. -| ... | *[Ver] TG verification:* Test ICMPv4 (or ICMPv6) Echo Request packets -| ... | are sent in both directions by TG on links to DUT1 via VM; on -| ... | receive TG verifies packets for correctness and their IPv4 (IPv6) -| ... | src-addr, dst-addr and MAC addresses. -| ... | *[Ref] Applicable standard specifications:* - -*** Variables *** -| ${bd_id1}= | 1 -| ${bd_id2}= | 2 - -| ${sock1}= | /tmp/sock1 -| ${sock2}= | /tmp/sock2 - -*** Test Cases *** -| TC01: DUT with two L2BDs (static MACs) switches ICMPv4 between TG and VM links -| | [Documentation] -| | ... | [Top] TG=DUT=VM. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT1 configure \ -| | ... | two L2BDs with static MACs, each with vhost-user i/f to local VM -| | ... | and i/f to TG; configure VM to loop pkts back betwen its two -| | ... | virtio i/fs. [Ver] Make TG verify ICMPv4 Echo Req pkts are -| | ... | switched thru DUT1 and VM in both directions and are correct on -| | ... | receive. [Ref] -| | ... -| | [Teardown] | Run Keywords | Stop and clear QEMU | ${dut_node} | ${vm_node} -| | ... | AND | Tear down functional test -| | ... -| | Given Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Set interfaces in 2-node circular topology up -| | When Configure vhost interfaces for L2BD forwarding | ${dut_node} -| | ... | ${sock1} | ${sock2} -| | And Create bridge domain | ${dut_node} | ${bd_id1} -| | ... | learn=${FALSE} -| | And Add interface to bridge domain | ${dut_node} | ${dut_to_tg_if1} -| | ... | ${bd_id1} -| | And Add interface to bridge domain | ${dut_node} | ${vhost_if1} | ${bd_id1} -| | And Add destination port to L2FIB | ${tg_node} -| | ... | ${tg_to_dut_if1} -| | ... | ${dut_node} -| | ... | ${dut_to_tg_if1} -| | ... | ${bd_id1} -| | And Add destination port to L2FIB | ${tg_node} -| | ... | ${tg_to_dut_if2} -| | ... | ${dut_node} -| | ... | ${vhost_if1} -| | ... | ${bd_id1} -| | And Create bridge domain | ${dut_node} | ${bd_id2} -| | ... | learn=${FALSE} -| | And Add interface to bridge domain | ${dut_node} | ${dut_to_tg_if2} -| | ... | ${bd_id2} -| | And Add interface to bridge domain | ${dut_node} | ${vhost_if2} -| | ... | ${bd_id2} -| | And Add destination port to L2FIB | ${tg_node} -| | ... | ${tg_to_dut_if2} -| | ... | ${dut_node} -| | ... | ${dut_to_tg_if2} -| | ... | ${bd_id2} -| | And Add destination port to L2FIB | ${tg_node} -| | ... | ${tg_to_dut_if1} -| | ... | ${dut_node} -| | ... | ${vhost_if2} -| | ... | ${bd_id2} -| | And Configure VM for vhost L2BD forwarding | ${dut_node} | ${sock1} -| | ... | ${sock2} -| | Then Send ICMPv4 bidirectionally and verify received packets -| | ... | ${tg_node} | ${tg_to_dut_if1} | ${tg_to_dut_if2} - -| TC02: DUT with two L2BDs (static MACs) switches ICMPv6 between TG and VM links -| | [Documentation] -| | ... | [Top] TG=DUT=VM. [Enc] Eth-IPv6-ICMPv6. [Cfg] On DUT1 configure \ -| | ... | two L2BDs with static MACs, each with vhost-user i/f to local VM -| | ... | and i/f to TG; configure VM to loop pkts back betwen its two -| | ... | virtio i/fs. [Ver] Make TG verify ICMPv6 Echo Req pkts are -| | ... | switched thru DUT1 and VM in both directions and are correct on -| | ... | receive. [Ref] -| | ... -| | [Teardown] | Run Keywords | Stop and clear QEMU | ${dut_node} | ${vm_node} -| | ... | AND | Tear down functional test -| | ... -| | Given Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Set interfaces in 2-node circular topology up -| | When Configure vhost interfaces for L2BD forwarding | ${dut_node} -| | ... | ${sock1} -| | ... | ${sock2} -| | And Create bridge domain | ${dut_node} | ${bd_id1} -| | ... | learn=${FALSE} -| | And Add interface to bridge domain | ${dut_node} | ${dut_to_tg_if1} -| | ... | ${bd_id1} -| | And Add interface to bridge domain | ${dut_node} | ${vhost_if1} -| | ... | ${bd_id1} -| | And Add destination port to L2FIB | ${tg_node} -| | ... | ${tg_to_dut_if1} -| | ... | ${dut_node} -| | ... | ${dut_to_tg_if1} -| | ... | ${bd_id1} -| | And Add destination port to L2FIB | ${tg_node} -| | ... | ${tg_to_dut_if2} -| | ... | ${dut_node} -| | ... | ${vhost_if1} -| | ... | ${bd_id1} -| | And Create bridge domain | ${dut_node} | ${bd_id2} -| | ... | learn=${FALSE} -| | And Add interface to bridge domain | ${dut_node} | ${dut_to_tg_if2} -| | ... | ${bd_id2} -| | And Add interface to bridge domain | ${dut_node} | ${vhost_if2} | ${bd_id2} -| | And Add destination port to L2FIB | ${tg_node} -| | ... | ${tg_to_dut_if2} -| | ... | ${dut_node} -| | ... | ${dut_to_tg_if2} -| | ... | ${bd_id2} -| | And Add destination port to L2FIB | ${tg_node} -| | ... | ${tg_to_dut_if1} -| | ... | ${dut_node} -| | ... | ${vhost_if2} -| | ... | ${bd_id2} -| | And Configure VM for vhost L2BD forwarding | ${dut_node} | ${sock1} -| | ... | ${sock2} -| | Then Send ICMPv6 bidirectionally and verify received packets -| | ... | ${tg_node} | ${tg_to_dut_if1} | ${tg_to_dut_if2} diff --git a/tests/func/l2bd/eth2p-eth-l2bdbasemacstc-func.robot b/tests/func/l2bd/eth2p-eth-l2bdbasemacstc-func.robot deleted file mode 100644 index 7ba6b46591..0000000000 --- a/tests/func/l2bd/eth2p-eth-l2bdbasemacstc-func.robot +++ /dev/null @@ -1,85 +0,0 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/default.robot -| Resource | resources/libraries/robot/bridge_domain.robot -| Resource | resources/libraries/robot/testing_path.robot -| Resource | resources/libraries/robot/qemu.robot -| Library | resources.libraries.python.Trace -| Force Tags | HW_ENV | VM_ENV | SKIP_VPP_PATCH -| Test Setup | Set up functional test -| Test Teardown | Tear down functional test -| Documentation | *L2 bridge-domain test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for L2 switching of -| ... | IPv4; Eth-IPv6-ICMPv6 for L2 switching of IPv6 use. Both apply -| ... | to all links. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 -| ... | bridge-domain (L2BD) switching combined with static MACs. -| ... | *[Ver] TG verification:* Test ICMPv4 (or ICMPv6) Echo Request packets -| ... | are sent in both directions by TG on links to DUT1 and DUT2; on -| ... | receive TG verifies packets for correctness and their IPv4 (IPv6) -| ... | src-addr, dst-addr and MAC addresses. -| ... | *[Ref] Applicable standard specifications:* - -*** Variables *** -| ${bd_id1}= | 1 -| ${bd_id2}= | 2 - -*** Test Cases *** -| TC01: DUT1 and DUT2 with L2BD (static MACs) switch between two TG links -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT1 and \ -| | ... | DUT2 configure two i/fs into L2BD with static MACs. [Ver] Make -| | ... | TG verify ICMPv4 Echo Req pkts are switched thru DUT1 and DUT2 -| | ... | in both directions and are correct on receive. [Ref] -| | [Tags] | 3_NODE_SINGLE_LINK_TOPO -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | When Create bridge domain | ${dut1_node} | ${bd_id1} | learn=${FALSE} -| | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_tg} -| | ... | ${bd_id1} -| | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_dut2} -| | ... | ${bd_id1} -| | And Add destination port to L2FIB | ${tg_node} -| | ... | ${tg_to_dut1} -| | ... | ${dut1_node} -| | ... | ${dut1_to_tg} -| | ... | ${bd_id1} -| | And Add destination port to L2FIB | ${tg_node} -| | ... | ${tg_to_dut2} -| | ... | ${dut1_node} -| | ... | ${dut1_to_dut2} -| | ... | ${bd_id1} -| | And Create bridge domain | ${dut2_node} | ${bd_id2} -| | ... | learn=${FALSE} -| | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_tg} -| | ... | ${bd_id2} -| | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_dut1} -| | ... | ${bd_id2} -| | And Add destination port to L2FIB | ${tg_node} -| | ... | ${tg_to_dut1} -| | ... | ${dut2_node} -| | ... | ${dut2_to_dut1} -| | ... | ${bd_id2} -| | And Add destination port to L2FIB | ${tg_node} -| | ... | ${tg_to_dut2} -| | ... | ${dut2_node} -| | ... | ${dut2_to_tg} -| | ... | ${bd_id2} -| | Then Send ICMPv4 bidirectionally and verify received packets | ${tg_node} | ${tg_to_dut1} -| | ... | ${tg_to_dut2} diff --git a/tests/func/l2bd/eth4p-eth-l2bdbasemaclrn-l2shg-func.robot b/tests/func/l2bd/eth4p-eth-l2bdbasemaclrn-l2shg-func.robot deleted file mode 100644 index 3649f928c5..0000000000 --- a/tests/func/l2bd/eth4p-eth-l2bdbasemaclrn-l2shg-func.robot +++ /dev/null @@ -1,86 +0,0 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/default.robot -| Resource | resources/libraries/robot/bridge_domain.robot -| Resource | resources/libraries/robot/testing_path.robot -| Resource | resources/libraries/robot/qemu.robot -| Library | resources.libraries.python.Trace -| Force Tags | HW_ENV | VM_ENV -| Test Setup | Set up functional test -| Test Teardown | Tear down functional test -| Documentation | *L2 bridge-domain test cases* -| ... -| ... | *[Top] Network Topologies:* TG=DUT1=DUT2=TG 3-node circular topology -| ... | with double parallel links. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for L2 switching of -| ... | IPv4; Eth-IPv6-ICMPv6 for L2 switching of IPv6 use. Both apply -| ... | to all links. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 -| ... | bridge-domain (L2BD) switching combined with MAC learning enabled -| ... | and Split Horizon Groups (SHG). -| ... | *[Ver] TG verification:* Test ICMPv4 (or ICMPv6) Echo Request packets -| ... | are sent in both directions by TG on links to DUT1 and DUT2; on -| ... | receive TG verifies packets for correctness and their IPv4 (IPv6) -| ... | src-addr, dst-addr and MAC addresses. -| ... | *[Ref] Applicable standard specifications:* - -*** Variables *** -| ${bd_id1}= | 1 -| ${bd_id2}= | 2 - -| ${shg1}= | 3 -| ${shg2}= | 4 - -*** Test Cases *** -| TC01: DUT1 and DUT2 with L2BD (MAC learn) and SHG switch between four TG links -| | [Documentation] -| | ... | [Top] TG=DUT1=DUT2=TG. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT1 and \ -| | ... | DUT2 configure four i/fs into L2BD with MAC learning and the -| | ... | same SHG on i/fs towards TG. [Ver] Make TG verify ICMPv4 Echo -| | ... | Req pkts are switched thru DUT1 and DUT2 in both directions and -| | ... | are correct on receive; verify no pkts are switched thru SHG -| | ... | isolated interfaces. [Ref] -| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO -| | Given Configure path for 3-node BD-SHG test | ${nodes['TG']} -| | ... | ${nodes['DUT1']} | ${nodes['DUT2']} -| | And Set interfaces in 3-node BD-SHG test up -| | When Create bridge domain | ${dut1_node} | ${bd_id1} -| | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_tg_if1} -| | ... | ${bd_id1} | ${shg1} -| | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_tg_if2} -| | ... | ${bd_id1} | ${shg1} -| | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_dut2} -| | ... | ${bd_id1} -| | And Create bridge domain | ${dut2_node} | ${bd_id2} -| | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_tg_if1} -| | ... | ${bd_id2} | ${shg2} -| | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_tg_if2} -| | ... | ${bd_id2} | ${shg2} -| | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_dut1} -| | ... | ${bd_id2} -| | Then Send ICMPv4 bidirectionally and verify received packets | ${tg_node} -| | ... | ${tg_to_dut1_if1} | ${tg_to_dut2_if1} -| | And Send ICMPv4 bidirectionally and verify received packets | ${tg_node} -| | ... | ${tg_to_dut1_if1} | ${tg_to_dut2_if2} -| | And Send ICMPv4 bidirectionally and verify received packets | ${tg_node} -| | ... | ${tg_to_dut1_if2} | ${tg_to_dut2_if1} -| | And Send ICMPv4 bidirectionally and verify received packets | ${tg_node} -| | ... | ${tg_to_dut1_if2} | ${tg_to_dut2_if2} -| | And Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Send ICMPv4 bidirectionally and verify received packets -| | | ... | ${tg_node} | ${tg_to_dut1_if1} | ${tg_to_dut1_if2} -| | And Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Send ICMPv4 bidirectionally and verify received packets -| | | ... | ${tg_node} | ${tg_to_dut2_if1} | ${tg_to_dut2_if2} |