diff options
Diffstat (limited to 'tests/func/lisp/eth2p-ethip6lispgpe-ip6basevrf-func.robot')
| -rw-r--r-- | tests/func/lisp/eth2p-ethip6lispgpe-ip6basevrf-func.robot | 112 |
1 files changed, 0 insertions, 112 deletions
diff --git a/tests/func/lisp/eth2p-ethip6lispgpe-ip6basevrf-func.robot b/tests/func/lisp/eth2p-ethip6lispgpe-ip6basevrf-func.robot deleted file mode 100644 index 281bbd0dda..0000000000 --- a/tests/func/lisp/eth2p-ethip6lispgpe-ip6basevrf-func.robot +++ /dev/null @@ -1,112 +0,0 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Library | resources.libraries.python.topology.Topology -| Library | resources.libraries.python.NodePath -| Library | resources.libraries.python.Trace -| Library | resources.libraries.python.IPUtil -| Library | resources.libraries.python.IPv6Setup -| Library | resources.libraries.python.VPPUtil -| Resource | resources/libraries/robot/traffic.robot -| Resource | resources/libraries/robot/default.robot -| Resource | resources/libraries/robot/interfaces.robot -| Resource | resources/libraries/robot/testing_path.robot -| Resource | resources/libraries/robot/qemu.robot -| Resource | resources/libraries/robot/bridge_domain.robot -| Resource | resources/libraries/robot/vrf.robot -| Resource | resources/libraries/robot/lisp/lispgpe.robot -# Import configuration and test data: -| Variables | resources/test_data/lisp/ipv6_lispgpe_ipv6/ipv6_lispgpe_ipv6.py -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | LISP -| ... -| Test Setup | Run Keywords | Set up functional test -| ... | AND | Vpp All Ra Suppress Link Layer | ${nodes} -| ... -| Test Teardown | Tear down LISP functional test -| ... -| Documentation | *ip6-lispgpe-ip6 encapsulation test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-LISP-IPv6-ICMPv6 on DUT1-DUT2,\ -| ... | Eth-IPv6-ICMPv6 on TG-DUTn for IPv6 routing over LISPoIPv6 tunnel. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\ -| ... | routing and static routes. LISPoIPv6 tunnel is configured between\ -| ... | DUT1 and DUT2. -| ... | *[Ver] TG verification:* Test ICMPv6 Echo Request packets are sent in\ -| ... | both directions by TG on links to DUT1 and DUT2; on receive\ -| ... | TG verifies packets for correctness and their IPv6 src-addr, dst-addr\ -| ... | and MAC addresses. -| ... | *[Ref] Applicable standard specifications:* RFC6830. - -*** Test Cases *** -| TC01: DUT1 and DUT2 route IPv6 bidirectionally over LISP GPE tunnel using physical interfaces and VRF is enabled -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. -| | ... | [Enc] Eth-IPv6-LISPGPE-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on\ -| | ... | TG-DUTn. -| | ... | [Cfg] Configure IPv6 LISP static adjacencies on DUT1 and DUT2. -| | ... | [Ver] Case: ip6-lispgpe-ip6 - vrf, phy2lisp -| | ... | Make TG send ICMPv6 Echo Req between its interfaces across both\ -| | ... | DUTs and LISP GPE tunnel between them; verify IPv6 headers on\ -| | ... | received packets are correct. -| | ... | [Ref] RFC6830. -| | ... -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | And Assign Interface To Fib Table | ${dut1_node} -| | ... | ${dut1_to_tg} | ${fib_table_1} | ipv6=${TRUE} -| | And Assign Interface To Fib Table | ${dut2_node} -| | ... | ${dut2_to_tg} | ${fib_table_1} | ipv6=${TRUE} -| | And Vpp Set If IPv6 Addr -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip6} | ${prefix6} -| | And Vpp Set If IPv6 Addr -| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip6} | ${prefix6} -| | And Vpp Set If IPv6 Addr -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_dut1_ip6} | ${prefix6} -| | And Vpp Set If IPv6 Addr -| | ... | ${dut2_node} | ${dut2_to_tg} | ${dut2_to_tg_ip6} | ${prefix6} -| | And Add IP Neighbors -| | And Vpp All RA Suppress Link Layer | ${nodes} -| | When Configure LISP GPE topology in 3-node circular topology -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE} -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid} -| | ... | ${dut1_to_dut2_ip6_static_adjacency} -| | ... | ${dut2_to_dut1_ip6_static_adjacency} -| | ... | ${dut1_dut2_vni} | ${fib_table_1} -| | Then Send packet and verify headers -| | ... | ${tg_node} | ${tg1_ip6} | ${tg2_ip6} -| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} -| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} -| | And Send packet and verify headers -| | ... | ${tg_node} | ${tg2_ip6} | ${tg1_ip6} -| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} -| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} - -*** Keywords *** -| Add IP Neighbors -| | [Documentation] -| | ... | Add IP neighbors to physical interfaces on DUTs. -| | ... -| | Add IP Neighbor | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip6} -| | ... | ${tg_to_dut1_mac} -| | Add IP Neighbor | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip6} -| | ... | ${tg_to_dut2_mac} -| | Add IP Neighbor | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip6} -| | ... | ${dut2_to_dut1_mac} -| | Add IP Neighbor | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip6} -| | ... | ${dut1_to_dut2_mac} |