diff options
Diffstat (limited to 'tests/func/lisp/ipsec_ipv4_lispgpe_ipv6.robot')
| -rw-r--r-- | tests/func/lisp/ipsec_ipv4_lispgpe_ipv6.robot | 262 |
1 files changed, 262 insertions, 0 deletions
diff --git a/tests/func/lisp/ipsec_ipv4_lispgpe_ipv6.robot b/tests/func/lisp/ipsec_ipv4_lispgpe_ipv6.robot new file mode 100644 index 0000000000..c290564d7b --- /dev/null +++ b/tests/func/lisp/ipsec_ipv4_lispgpe_ipv6.robot @@ -0,0 +1,262 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Library | resources.libraries.python.topology.Topology +| Library | resources.libraries.python.NodePath +| Library | resources.libraries.python.Trace +| Library | resources.libraries.python.IPUtil +| Library | resources.libraries.python.L2Util +| Library | resources.libraries.python.LispUtil +| Library | resources.libraries.python.IPsecUtil +| Library | resources.libraries.python.VatJsonUtil +| Library | resources.libraries.python.IPv6Setup +| Library | resources.libraries.python.VhostUser +| Library | resources.libraries.python.QemuUtils +| Library | String +| Resource | resources/libraries/robot/traffic.robot +| Resource | resources/libraries/robot/default.robot +| Resource | resources/libraries/robot/interfaces.robot +| Resource | resources/libraries/robot/testing_path.robot +| Resource | resources/libraries/robot/ipv6.robot +| Resource | resources/libraries/robot/ipsec.robot +| Resource | resources/libraries/robot/qemu.robot +| Resource | resources/libraries/robot/lisp/lispgpe.robot +| Resource | resources/libraries/robot/bridge_domain.robot +# Import configuration and test data: +| Variables | resources/test_data/lisp/ipv4_lispgpe_ipv6/ipv4_lispgpe_ipsec_ipv6.py +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | LISP +| ... +| Test Setup | Run Keywords | Setup all DUTs before test +| ... | AND | Setup all TGs before traffic script +| ... | AND | Update All Interface Data On All Nodes | ${nodes} +| Test Teardown | Run Keywords | Show Packet Trace on All DUTs | ${nodes} +| ... | AND | Show vpp trace dump on all DUTs +| ... | AND | VPP Show Errors | ${nodes['DUT1']} +| ... | AND | VPP Show Errors | ${nodes['DUT2']} +| ... +| Documentation | *IPv6 - ip4-ipsec-lispgpe-ip6 - main fib, virt2lisp, phy2lisp* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:*Eth-IPv6-LISPGPE-IPSec-IPv4-ICMP,\ +| ... | Eth-IPv6-IPSec-LISPGPE-IPv4-ICMP +| ... | *[Cfg] DUT configuration:* Each DUT is configured with LISP and IPsec.\ +| ... | IPsec is in transport mode. Tests cases are for IPsec configured both\ +| ... | on RLOC interface or lisp_gpe0 interface. +| ... | *[Ver] TG verification:* Packet is send from TG(if1) across the DUT1 to\ +| ... | DUT2 where it is forwarded to TG(if2). +| ... | *[Ref] Applicable standard specifications:* RFC6830, RFC4303. + +*** Test Cases *** +| TC01: DUT1 and DUT2 route IPv4 bidirectionally over LISP GPE tunnel using IPsec (transport) on RLOC Int. +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. +| | ... | [Enc] Eth-IPv6-LISPGPE-IPSec-IPv4-ICMP on DUT1-DUT2, Eth-IPv4-ICMP\ +| | ... | on TG-DUTn. +| | ... | [Cfg] Configure IPv6 LISP static adjacencies on DUT1 and DUT2 with\ +| | ... | IPsec in between DUTS. +| | ... | [Ver] Make TG send ICMPv6 Echo Req between its interfaces across\ +| | ... | both DUTs and LISP GPE tunnel between them; verify IPv4 headers on\ +| | ... | received packets are correct. +| | ... | [Ref] RFC6830, RFC4303. +| | ... +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Setup Topology And Lisp +| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg} +| | When VPP Setup IPsec Manual Keyed Connection +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${encr_alg} | ${encr_key} +| | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi} +| | ... | ${dut1_to_dut2_ip6} | ${dut2_to_dut1_ip6} +| | And VPP Setup IPsec Manual Keyed Connection +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${encr_alg} | ${encr_key} +| | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi} +| | ... | ${dut2_to_dut1_ip6} | ${dut1_to_dut2_ip6} +| | Then Send Packet And Check Headers +| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4} +| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} +| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} +| | And Send Packet And Check Headers +| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4} +| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} +| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} + +| TC02: DUT1 and DUT2 route IPv4 bidirectionally over LISP GPE tunnel using IPsec (transport) on lisp_gpe0 Int. +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. +| | ... | [Enc] Eth-IPv6-IPSec-LISPGPE-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMP\ +| | ... | on TG-DUTn. +| | ... | [Cfg] Configure IPv6 LISP static adjacencies on DUT1 and DUT2 with\ +| | ... | IPsec in between DUTS. +| | ... | [Ver] Make TG send ICMPv6 Echo Req between its interfaces across\ +| | ... | both DUTs and LISP GPE tunnel between them; verify IPv4 headers on\ +| | ... | received packets are correct. +| | ... | [Ref] RFC6830, RFC4303. +| | ... +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Setup Topology And Lisp +| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg} +| | ${lisp_if_idx}= | resources.libraries.python.InterfaceUtil.get sw if index +| | ... | ${dut1_node} | ${lisp_gpe_int} +| | When VPP Setup IPsec Manual Keyed Connection +| | ... | ${dut1_node} | ${lisp_if_idx} | ${encr_alg} | ${encr_key} +| | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi} +| | ... | ${dut1_to_dut2_ip6} | ${dut2_to_dut1_ip6} +| | And VPP Setup IPsec Manual Keyed Connection +| | ... | ${dut2_node} | ${lisp_if_idx} | ${encr_alg} | ${encr_key} +| | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi} +| | ... | ${dut2_to_dut1_ip6} | ${dut1_to_dut2_ip6} +| | Then Send Packet And Check Headers +| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4} +| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} +| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} +| | And Send Packet And Check Headers +| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4} +| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} +| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} + +| TC03: DUT1 and DUT2 route IPv4 over Vhost to LISP GPE tunnel using IPsec (transport) on RLOC Int. +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. +| | ... | [Enc] Eth-IPv6-LISPGPE-IPSec-IPv4-ICMP on DUT1-DUT2, Eth-IPv4-ICMP\ +| | ... | on TG-DUTn. +| | ... | [Cfg] Configure IPv6 LISP static adjacencies on DUT1 and DUT2 with\ +| | ... | IPsec in between DUTS. Create Qemu vm on DUT1 and configure bridge\ +| | ... | between two vhosts. +| | ... | [Ver] Case: ip6-ipsec-lispgpe-ip4 - main fib, virt2lisp\ +| | ... | Make TG send ICMPv6 Echo Req between its interfaces across\ +| | ... | both DUTs and LISP GPE tunnel between them; verify IPv6 headers on\ +| | ... | received packets are correct. +| | ... | [Ref] RFC6830, RFC4303. +| | [Teardown] | Run Keywords | Show Packet Trace on All DUTs | ${nodes} +| | ... | AND | Show vpp trace dump on all DUTs +| | ... | AND | VPP Show Errors | ${nodes['DUT1']} +| | ... | AND | VPP Show Errors | ${nodes['DUT2']} +| | ... | AND | Stop and Clear QEMU | ${dut1_node} | ${vm_node} +| | ... +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Setup Topology And Lisp +| | And Setup Qemu DUT1 +| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg} +| | When VPP Setup IPsec Manual Keyed Connection +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${encr_alg} | ${encr_key} +| | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi} +| | ... | ${dut1_to_dut2_ip6} | ${dut2_to_dut1_ip6} +| | And VPP Setup IPsec Manual Keyed Connection +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${encr_alg} | ${encr_key} +| | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi} +| | ... | ${dut2_to_dut1_ip6} | ${dut1_to_dut2_ip6} +| | Then Send Packet And Check Headers +| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4} +| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dst_vhost_mac} +| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} +| | And Send Packet And Check Headers +| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4} +| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} +| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} + +| TC04: DUT1 and DUT2 route IPv4 over Vhost to LISP GPE tunnel using IPsec (transport) on lisp_gpe0 Int. +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. +| | ... | [Enc] Eth-IPv6-IPSec-LISPGPE-IPv6-ICMPv6 on DUT1-DUT2,\ +| | ... | Eth-IPv6-ICMPv6, on TG-DUTn. +| | ... | [Cfg] Configure IPv6 LISP static adjacencies on DUT1 and DUT2 with\ +| | ... | IPsec in between DUTS. +| | ... | [Ver] Case: ip6-ipsec-lispgpe-ip4 - main fib, virt2lisp\ +| | ... | Make TG send ICMPv6 Echo Req between its interfaces across\ +| | ... | both DUTs and LISP GPE tunnel between them; verify IPv6 headers on\ +| | ... | received packets are correct. +| | ... | [Ref] RFC6830, RFC4303. +| | [Teardown] | Run Keywords | Show Packet Trace on All DUTs | ${nodes} +| | ... | AND | Show vpp trace dump on all DUTs +| | ... | AND | VPP Show Errors | ${nodes['DUT1']} +| | ... | AND | VPP Show Errors | ${nodes['DUT2']} +| | ... | AND | Stop and Clear QEMU | ${dut1_node} | ${vm_node} +| | ... +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Setup Topology And Lisp +| | And Setup Qemu DUT1 +| | ${lisp1_if_idx}= | resources.libraries.python.InterfaceUtil.get sw if index +| | ... | ${dut1_node} | ${lisp_gpe_int} +| | ${lisp2_if_idx}= | resources.libraries.python.InterfaceUtil.get sw if index +| | ... | ${dut2_node} | ${lisp_gpe_int} +| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg} +| | When VPP Setup IPsec Manual Keyed Connection +| | ... | ${dut1_node} | ${lisp1_if_idx} | ${encr_alg} | ${encr_key} +| | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi} +| | ... | ${dut1_to_dut2_ip6} | ${dut2_to_dut1_ip6} +| | And VPP Setup IPsec Manual Keyed Connection +| | ... | ${dut2_node} | ${lisp2_if_idx} | ${encr_alg} | ${encr_key} +| | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi} +| | ... | ${dut2_to_dut1_ip6} | ${dut1_to_dut2_ip6} +| | Then Send Packet And Check Headers +| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4} +| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dst_vhost_mac} +| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} +| | And Send Packet And Check Headers +| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4} +| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} +| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} + +*** Keywords *** +| Setup Topology And Lisp +| | [Documentation] | Setup IPs and neighbors for interfaces on DUT1 and DUT2\ +| | ... | and then setup LISP. +| | Path for 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | Interfaces in 3-node path are up +| | Vpp Set If IPv6 Addr | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip6} +| | ... | ${prefix6} +| | Vpp Set If IPv6 Addr | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip6} +| | ... | ${prefix6} +| | Vpp Set If IPv6 Addr | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip4} +| | ... | ${prefix4} +| | Vpp Set If IPv6 Addr | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_dut1_ip6} +| | ... | ${prefix6} +| | Vpp Set If IPv6 Addr | ${dut2_node} | ${dut2_to_tg} | ${dut2_to_tg_ip4} +| | ... | ${prefix4} +| | Add IP Neighbor | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip4} +| | ... | ${tg_to_dut2_mac} +| | Add IP Neighbor | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip6} +| | ... | ${dut2_to_dut1_mac} +| | Add IP Neighbor | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip6} +| | ... | ${dut1_to_dut2_mac} +| | Add IP Neighbor | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip4} +| | ... | ${tg_to_dut1_mac} +| | Set up LISP GPE topology +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE} +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid} +| | ... | ${dut1_to_dut2_ip_static_adjacency} +| | ... | ${dut2_to_dut1_ip_static_adjacency} + +| Setup Qemu DUT1 +| | [Documentation] | Setup Vhosts on DUT1 and setup IP to one of them. Setup\ +| | ... | Qemu and bridge the vhosts. +| | ${vhost1}= | And Vpp Create Vhost User Interface | ${dut1_node} | ${sock1} +| | ${vhost2}= | And Vpp Create Vhost User Interface | ${dut1_node} | ${sock2} +| | Set Interface Address | ${dut1_node} | ${vhost2} | ${vhost_ip} | ${prefix4} +| | Set Interface State | ${dut1_node} | ${vhost1} | up +| | Set Interface State | ${dut1_node} | ${vhost2} | up +| | Bridge domain on DUT node is created | ${dut1_node} | ${bid} | learn=${TRUE} +| | Interface is added to bridge domain | ${dut1_node} +| | ... | ${dut1_to_tg} | ${bid} | 0 +| | Interface is added to bridge domain | ${dut1_node} +| | ... | ${vhost1} | ${bid} | 0 +| | ${vhost_mac}= | Get Vhost User Mac By SW Index | ${dut1_node} | ${vhost2} +| | Set test variable | ${dst_vhost_mac} | ${vhost_mac} +| | VM for Vhost L2BD forwarding is setup | ${dut1_node} | ${sock1} | ${sock2} |