diff options
Diffstat (limited to 'tests/func/policer/eth2p-ethip6-ip6base-ipolicemarkbase-func.robot')
| -rw-r--r-- | tests/func/policer/eth2p-ethip6-ip6base-ipolicemarkbase-func.robot | 161 |
1 files changed, 161 insertions, 0 deletions
diff --git a/tests/func/policer/eth2p-ethip6-ip6base-ipolicemarkbase-func.robot b/tests/func/policer/eth2p-ethip6-ip6base-ipolicemarkbase-func.robot new file mode 100644 index 0000000000..6a7ae1a306 --- /dev/null +++ b/tests/func/policer/eth2p-ethip6-ip6base-ipolicemarkbase-func.robot @@ -0,0 +1,161 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Force Tags | 3_NODE_DOUBLE_LINK_TOPO | VM_ENV | HW_ENV +| Resource | resources/libraries/robot/policer.robot +| Library | resources.libraries.python.Trace +| Test Setup | Run Keywords | Func Test Setup +| ... | AND | Setup Topology for IPv6 policer testing +| Test Teardown | Func Test Teardown +| Documentation | *IPv6 policer test cases* +| ... +| ... | *[Top] Network topologies:* TG=DUT1 2-node topology with two links\ +| ... | between nodes. +| ... | *[Cfg] DUT configuration:* On DUT1 configure interfaces IPv6 adresses,\ +| ... | and static neighbor record on the second interface. +| ... | *[Ver] TG verification:* Test packet is sent from TG on the first link\ +| ... | to DUT1. Packet is received on TG on the second link from DUT1. +| ... | *[Ref] Applicable standard specifications:* RFC2474, RFC2697, RFC2698. + +*** Variables *** +| ${tg_to_dut_if1_ip6}= | 3ffe:5f::2 +| ${tg_to_dut_if2_ip6}= | 3ffe:60::2 +| ${dut_to_tg_if1_ip6}= | 3ffe:5f::1 +| ${dut_to_tg_if2_ip6}= | 3ffe:60::1 +| ${ip6_plen}= | ${64} + +| ${cir}= | ${100} +| ${eir}= | ${150} +| ${cb}= | ${200} +| ${eb}= | ${300} + +*** Test Cases *** +| TC01: VPP policer 2R3C Color-aware marks packet +| | [Documentation] +| | ... | [Top] TG=DUT1. +| | ... | [Ref] RFC2474, RFC2698. +| | ... | [Cfg] On DUT1 configure 2R3C color-aware policer on the first\ +| | ... | interface. +| | ... | [Ver] TG sends IPv6 TCP packet on the first link to DUT1.\ +| | ... | On DUT1 packet is marked with DSCP tag. Verify if DUT1 sends\ +| | ... | correct IPv6 TCP packet with correct DSCP on the second link to TG. +| | ${dscp}= | DSCP AF22 +| | Given Policer Set Name | policer1 +| | And Policer Set Node | ${dut_node} +| | And Policer Set CIR | ${cir} +| | And Policer Set EIR | ${eir} +| | And Policer Set CB | ${cb} +| | And Policer Set EB | ${eb} +| | And Policer Set Rate Type pps +| | And Policer Set Round Type Closest +| | And Policer Set Type 2R3C 2698 +| | And Policer Set Conform Action Transmit +| | And Policer Set Exceed Action Mark and Transmit | ${dscp} +| | And Policer Set Violate Action Drop +| | And Policer Enable Color Aware +| | And Policer Classify Set Precolor Exceed +| | And Policer Classify Set Interface | ${dut_to_tg_if1} +| | And Policer Classify Set Match IP | ${tg_to_dut_if1_ip} +| | When Policer Set Configuration +| | Then Send Packet and Verify Marking | ${tg_node} | ${tg_to_dut_if1} +| | ... | ${tg_to_dut_if2} | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_mac} +| | ... | ${tg_to_dut_if1_ip} | ${tg_to_dut_if2_ip} | ${dscp} + +| TC02: VPP policer 2R3C Color-blind marks packet +| | [Documentation] +| | ... | [Top] TG=DUT1. +| | ... | [Ref] RFC2474, RFC2698. +| | ... | [Cfg] On DUT1 configure 2R3C color-blind policer on the first\ +| | ... | interface. +| | ... | [Ver] TG sends IPv6 TCP packet on the first link to DUT1.\ +| | ... | On DUT1 packet is marked with DSCP tag. Verify if DUT1 sends\ +| | ... | correct IPv6 TCP packet with correct DSCP on the second link to TG. +| | ${dscp}= | DSCP AF22 +| | Given Policer Set Name | policer1 +| | And Policer Set Node | ${dut_node} +| | And Policer Set CIR | ${cir} +| | And Policer Set EIR | ${eir} +| | And Policer Set CB | ${cb} +| | And Policer Set EB | ${eb} +| | And Policer Set Rate Type pps +| | And Policer Set Round Type Closest +| | And Policer Set Type 2R3C 2698 +| | And Policer Set Conform Action Mark and Transmit | ${dscp} +| | And Policer Set Exceed Action Transmit +| | And Policer Set Violate Action Drop +| | And Policer Classify Set Precolor Conform +| | And Policer Classify Set Interface | ${dut_to_tg_if1} +| | And Policer Classify Set Match IP | ${tg_to_dut_if1_ip} +| | When Policer Set Configuration +| | Then Send Packet and Verify Marking | ${tg_node} | ${tg_to_dut_if1} +| | ... | ${tg_to_dut_if2} | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_mac} +| | ... | ${tg_to_dut_if1_ip} | ${tg_to_dut_if2_ip} | ${dscp} + +| TC03: VPP policer 1R3C Color-aware marks packet +| | [Documentation] +| | ... | [Top] TG=DUT1. +| | ... | [Ref] RFC2474, RFC2697. +| | ... | [Cfg] On DUT1 configure 1R3C color-aware policer on the first\ +| | ... | interface. +| | ... | [Ver] TG sends IPv6 TCP packet on the first link to DUT1.\ +| | ... | On DUT1 packet is marked with DSCP tag. Verify if DUT1 sends\ +| | ... | correct IPv6 TCP packet with correct DSCP on the second link to TG. +| | ${dscp}= | DSCP AF22 +| | Given Policer Set Name | policer1 +| | And Policer Set Node | ${dut_node} +| | And Policer Set CIR | ${1} +| | And Policer Set CB | ${2} +| | And Policer Set EB | ${eb} +| | And Policer Set Rate Type pps +| | And Policer Set Round Type Closest +| | And Policer Set Type 1R3C +| | And Policer Set Conform Action Transmit +| | And Policer Set Exceed Action Mark and Transmit | ${dscp} +| | And Policer Set Violate Action Drop +| | And Policer Enable Color Aware +| | And Policer Classify Set Precolor Exceed +| | And Policer Classify Set Interface | ${dut_to_tg_if1} +| | And Policer Classify Set Match IP | ${tg_to_dut_if1_ip} +| | When Policer Set Configuration +| | Then Send Packet and Verify Marking | ${tg_node} | ${tg_to_dut_if1} +| | ... | ${tg_to_dut_if2} | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_mac} +| | ... | ${tg_to_dut_if1_ip} | ${tg_to_dut_if2_ip} | ${dscp} + +| TC04: VPP policer 1R3C Color-blind marks packet +| | [Documentation] +| | ... | [Top] TG=DUT1. +| | ... | [Ref] RFC2474, RFC2697. +| | ... | [Cfg] On DUT1 configure 1R3C color-blind policer on the first\ +| | ... | interface. +| | ... | [Ver] TG sends IPv6 TCP packet on the first link to DUT1.\ +| | ... | On DUT1 packet is marked with DSCP tag. Verify if DUT1 sends\ +| | ... | correct IPv6 TCP packet with correct DSCP on the second link to TG. +| | ${dscp}= | DSCP AF22 +| | Given Policer Set Name | policer1 +| | And Policer Set Node | ${dut_node} +| | And Policer Set CIR | ${cir} +| | And Policer Set CB | ${cb} +| | And Policer Set Rate Type pps +| | And Policer Set Round Type Closest +| | And Policer Set Type 1R3C +| | And Policer Set Conform Action Mark and Transmit | ${dscp} +| | And Policer Set Exceed Action Transmit +| | And Policer Set Violate Action Drop +| | And Policer Classify Set Precolor Conform +| | And Policer Classify Set Interface | ${dut_to_tg_if1} +| | And Policer Classify Set Match IP | ${tg_to_dut_if1_ip} +| | When Policer Set Configuration +| | Then Send Packet and Verify Marking | ${tg_node} | ${tg_to_dut_if1} +| | ... | ${tg_to_dut_if2} | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_mac} +| | ... | ${tg_to_dut_if1_ip} | ${tg_to_dut_if2_ip} | ${dscp} |