aboutsummaryrefslogtreecommitdiffstats
path: root/tests/func/rpf
diff options
context:
space:
mode:
Diffstat (limited to 'tests/func/rpf')
-rw-r--r--tests/func/rpf/eth2p-ethip4-ip4base-rpf-func.robot134
1 files changed, 0 insertions, 134 deletions
diff --git a/tests/func/rpf/eth2p-ethip4-ip4base-rpf-func.robot b/tests/func/rpf/eth2p-ethip4-ip4base-rpf-func.robot
deleted file mode 100644
index 5a704e83a0..0000000000
--- a/tests/func/rpf/eth2p-ethip4-ip4base-rpf-func.robot
+++ /dev/null
@@ -1,134 +0,0 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/default.robot
-| Resource | resources/libraries/robot/counters.robot
-| Resource | resources/libraries/robot/interfaces.robot
-| Resource | resources/libraries/robot/testing_path.robot
-| Resource | resources/libraries/robot/ipv4.robot
-| Resource | resources/libraries/robot/l2_xconnect.robot
-| Resource | resources/libraries/robot/traffic.robot
-| Library | resources.libraries.python.Trace
-| Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO
-| Test Setup | Set up functional test
-| Test Teardown | Tear down functional test
-| Documentation | *Source RPF check on IPv4 test cases*
-| ...
-| ... | *[Top] Network Topologies:* TG - DUT1 - DUT2 - TG
-| ... | with one link between the nodes.
-| ... | *[Cfg] DUT configuration:* DUT2 is configured with L2 Cross connect.
-| ... | DUT1 is configured with IP source check on link to TG,
-| ... | *[Ver] TG verification:* Test ICMP Echo Request packets are sent
-| ... | in one direction by TG on link to DUT1 and received on TG link
-| ... | to DUT2. On receive TG verifies if packets which source address
-| ... | is not in routes are dropped.
-
-*** Variables ***
-| ${dut1_to_tg_ip}= | 192.168.1.1
-| ${dut1_to_tg_ip_GW}= | 192.168.1.2
-| ${dut1_to_dut2_ip}= | 192.168.2.1
-| ${dut1_to_dut2_ip_GW}= | 192.168.2.2
-| ${test_dst_ip}= | 32.0.0.1
-| ${pass_test_src_ip}= | 16.0.0.1
-| ${drop_test_src_ip}= | 24.0.0.1
-| ${prefix_length}= | 24
-
-*** Test Cases ***
-| TC01: VPP source RPF check on IPv4 src-addr
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG
-| | ... | [Cfg] On DUT1 setup IP source check.
-| | ... | [Ver] Make TG verify matching packets which source address
-| | ... | is not in routes are dropped.
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And Set Interface Address | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And Set Interface Address | ${dut1_node}
-| | ... | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length}
-| | And Add Arp On Dut
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW}
-| | ... | ${tg_to_dut2_mac}
-| | And Vpp Route Add
-| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length}
-| | ... | ${dut1_to_dut2_ip_GW} | ${dut1_to_dut2} | resolve_attempts=${NONE}
-| | And Add Arp On Dut
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip_GW}
-| | ... | ${tg_to_dut1_mac}
-| | And Vpp Route Add
-| | ... | ${dut1_node} | ${pass_test_src_ip} | ${prefix_length}
-| | ... | ${dut1_to_tg_ip_GW} | ${dut1_to_tg} | resolve_attempts=${NONE}
-| | And Configure L2XC
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | Then Send packet and verify headers | ${tg_node}
-| | ... | ${pass_test_src_ip} | ${test_dst_ip} | ${tg_to_dut1}
-| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2}
-| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
-| | And Send packet and verify headers | ${tg_node}
-| | ... | ${drop_test_src_ip} | ${test_dst_ip} | ${tg_to_dut1}
-| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2}
-| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
-| | ${dut1_to_tg_name}= | Get Interface Name | ${dut1_node} | ${dut1_to_tg}
-| | When VPP IP Source Check Setup | ${dut1_node} | ${dut1_to_tg_name}
-| | Then Send packet and verify headers | ${tg_node}
-| | ... | ${pass_test_src_ip} | ${test_dst_ip} | ${tg_to_dut1}
-| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2}
-| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
-| | And Send packet and verify headers | ${tg_node}
-| | ... | ${dut1_to_tg_ip_GW} | ${test_dst_ip} | ${tg_to_dut1}
-| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2}
-| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
-| | And Packet transmission from port to port should fail | ${tg_node}
-| | ... | ${drop_test_src_ip} | ${test_dst_ip} | ${tg_to_dut1}
-| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2}
-| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
-
-| TC02: VPP pass traffic on non-enabled RPF interface
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG
-| | ... | [Cfg] On DUT1 setup IP source check.
-| | ... | [Ver] Make TG verify matching packets on non-enabled RPF interface
-| | ... | are passed.
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And Set Interface Address | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And Set Interface Address | ${dut1_node}
-| | ... | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length}
-| | And Add Arp On Dut
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW}
-| | ... | ${tg_to_dut2_mac}
-| | And Vpp Route Add
-| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length}
-| | ... | ${dut1_to_dut2_ip_GW} | ${dut1_to_dut2} | resolve_attempts=${NONE}
-| | And Add Arp On Dut
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip_GW}
-| | ... | ${tg_to_dut1_mac}
-| | And Vpp Route Add
-| | ... | ${dut1_node} | ${pass_test_src_ip} | ${prefix_length}
-| | ... | ${dut1_to_tg_ip_GW} | ${dut1_to_tg} | resolve_attempts=${NONE}
-| | And Configure L2XC
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | ${dut1_to_tg_name}= | Get Interface Name | ${dut1_node} | ${dut1_to_tg}
-| | When VPP IP Source Check Setup | ${dut1_node} | ${dut1_to_tg_name}
-| | Then Send packet and verify headers | ${tg_node}
-| | ... | ${test_dst_ip} | ${pass_test_src_ip} | ${tg_to_dut2}
-| | ... | ${tg_to_dut2_mac} | ${dut1_to_dut2_mac} | ${tg_to_dut1}
-| | ... | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
-| | And Send packet and verify headers | ${tg_node}
-| | ... | ${test_dst_ip} | ${dut1_to_tg_ip_GW} | ${tg_to_dut2}
-| | ... | ${tg_to_dut2_mac} | ${dut1_to_dut2_mac} | ${tg_to_dut1}
-| | ... | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}