1 files changed, 0 insertions, 231 deletions
diff --git a/tests/func/vhost/eth2p-ethip4-l2bdbase-vhost-client-reconnect-2vm-func.robot b/tests/func/vhost/eth2p-ethip4-l2bdbase-vhost-client-reconnect-2vm-func.robot
deleted file mode 100644
index 958acc2c5d..0000000000
--- a/tests/func/vhost/eth2p-ethip4-l2bdbase-vhost-client-reconnect-2vm-func.robot
+++ /dev/null
@@ -1,231 +0,0 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/default.robot
-| Resource | resources/libraries/robot/bridge_domain.robot
-| Resource | resources/libraries/robot/testing_path.robot
-| Resource | resources/libraries/robot/qemu.robot
-| Resource | resources/libraries/robot/vxlan.robot
-| Library  | resources.libraries.python.Trace
-| Force Tags | HW_ENV | VM_ENV | 3_NODE_DOUBLE_LINK_TOPO | VPP_VM_ENV
-| Test Setup | Set up functional test
-| Test Teardown | Run Keywords
-| ... | resources.libraries.python.QemuUtils.Qemu Kill All | ${dut_node} | AND
-| ... | Tear down functional test
-| Documentation | *Vhost-User Interface Traffic Tests*
-| ... | *[Top] Network Topologies:* TG=DUT1 2-node topology with two links
-| ... | between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-VXLAN-ETH-IP on TG-DUT link.
-| ... | ETH-IP on VirtualEthernet-VM interface.
-| ... | *[Cfg] DUT configuration:* On DUT is running 2 VM with 2 vhost-user
-| ... | interface on each VM. DUT is configured with VXLAN and vhost-user
-| ... | interfaces in bridge-domain (L2BD).
-| ... | *[Cfg] VM configuration:* VM has both vhost-user interfaces added into
-| ... | Linux Bridge.
-| ... | *[Ver] TG verification:*
-| ... | VXLAN packet is send to DUT where is decapsulated and send bridged to
-| ... | vhost-user inteface. VM forwards frame to its second interface and VPP
-| ... | encapsulates it to another VXLAN tunnel. Packets
-| ... | are sent and received by TG on link to DUT.
-
-*** Variables ***
-| ${tg_if1_ip}= | 192.168.0.1
-| ${dut_if1_ip}= | 192.168.0.2
-| ${prefix_length}= | ${24}
-
-| ${sock_vm1_1}= | /tmp/sock1
-| ${sock_vm1_2}= | /tmp/sock2
-| ${sock_vm2_1}= | /tmp/sock3
-| ${sock_vm2_2}= | /tmp/sock4
-
-*** Test Cases ***
-| TC01: Qemu reconnects to VPPs vhost-user when Qemu is killed and restarted
-| | Given Configure path in 2-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
-| | And Set interfaces in 2-node circular topology up
-| | And Set Interface Address | ${dut_node} | ${dut_to_tg_if1} | ${dut_if1_ip}
-| | ... | ${prefix_length}
-| | And Add IP Neighbor | ${dut_node} | ${dut_to_tg_if1} | ${tg_if1_ip}
-| | ... | ${tg_to_dut_if1_mac}
-| | ${vxlan1}= | And Create VXLAN interface | ${dut_node} | ${101}
-| | ... | ${dut_if1_ip} | ${tg_if1_ip}
-| | ${vxlan2}= | And Create VXLAN interface | ${dut_node} | ${102}
-| | ... | ${dut_if1_ip} | ${tg_if1_ip}
-| | ${vxlan3}= | And Create VXLAN interface | ${dut_node} | ${103}
-| | ... | ${dut_if1_ip} | ${tg_if1_ip}
-| | ${vxlan4}= | And Create VXLAN interface | ${dut_node} | ${104}
-| | ... | ${dut_if1_ip} | ${tg_if1_ip}
-| | And Set Interface State | ${dut_node} | ${vxlan1} | up
-| | And Set Interface State | ${dut_node} | ${vxlan2} | up
-| | And Set Interface State | ${dut_node} | ${vxlan3} | up
-| | And Set Interface State | ${dut_node} | ${vxlan4} | up
-| | ${vhost_if1}= | And Vpp Create Vhost User Interface
-| | ... | ${dut_node} | ${sock_vm1_1}
-| | ${vhost_if2}= | And Vpp Create Vhost User Interface
-| | ... | ${dut_node} | ${sock_vm1_2}
-| | ${vhost_if3}= | And Vpp Create Vhost User Interface
-| | ... | ${dut_node} | ${sock_vm2_1}
-| | ${vhost_if4}= | And Vpp Create Vhost User Interface
-| | ... | ${dut_node} | ${sock_vm2_2}
-| | And Set Interface State | ${dut_node} | ${vhost_if1} | up
-| | And Set Interface State | ${dut_node} | ${vhost_if2} | up
-| | And Set Interface State | ${dut_node} | ${vhost_if3} | up
-| | And Set Interface State | ${dut_node} | ${vhost_if4} | up
-| | And Vpp Add L2 Bridge Domain | ${dut_node} | ${101} | ${vxlan1}
-| | ... | ${vhost_if1}
-| | And Vpp Add L2 Bridge Domain | ${dut_node} | ${102} | ${vxlan2}
-| | ... | ${vhost_if2}
-| | And Vpp Add L2 Bridge Domain | ${dut_node} | ${103} | ${vxlan3}
-| | ... | ${vhost_if3}
-| | And Vpp Add L2 Bridge Domain | ${dut_node} | ${104} | ${vxlan4}
-| | ... | ${vhost_if4}
-| | And Configure QEMU vhost and run it VM | ${dut_node} | ${sock_vm1_1}
-| | ... | ${sock_vm1_2} | ${1}
-| | And Configure QEMU vhost and run it VM | ${dut_node} | ${sock_vm2_1}
-| | ... | ${sock_vm2_2} | ${2}
-| | And Check traffic through VM
-| | When Run keyword | qemu-1.Qemu Kill
-| | ${vm1}= | And Run Keyword | qemu-1.Qemu Start
-| | ${vhost_int_1}= | And Get Vhost User If Name By Sock | ${vm1}
-| | ... | ${sock_vm1_1}
-| | ${vhost_int_2}= | And Get Vhost User If Name By Sock | ${vm1}
-| | ... | ${sock_vm1_2}
-| | And Linux Add Bridge | ${vm1} | br0 | ${vhost_int_1} | ${vhost_int_2}
-| | And Set Interface State | ${vm1} | ${vhost_int_1} | up | if_type=name
-| | And Set Interface State | ${vm1} | ${vhost_int_2} | up | if_type=name
-| | Then Check traffic through VM
-
-
-| TC02: VPP reconnects to Qemu vhost-user when Restart VPP and reconfigured
-| | [Tags] | EXPECTED_FAILING
-| | [Documentation]
-| | ... | *Failing:* Qemu doesn't support reconnect prior to version 2.7.
-| | Given Configure path in 2-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
-| | And Set interfaces in 2-node circular topology up
-| | And Set Interface Address | ${dut_node} | ${dut_to_tg_if1} | ${dut_if1_ip}
-| | ... | ${prefix_length}
-| | And Add IP Neighbor | ${dut_node} | ${dut_to_tg_if1} | ${tg_if1_ip}
-| | ... | ${tg_to_dut_if1_mac}
-| | ${vxlan1}= | And Create VXLAN interface | ${dut_node} | ${101}
-| | ... | ${dut_if1_ip} | ${tg_if1_ip}
-| | ${vxlan2}= | And Create VXLAN interface | ${dut_node} | ${102}
-| | ... | ${dut_if1_ip} | ${tg_if1_ip}
-| | ${vxlan3}= | And Create VXLAN interface | ${dut_node} | ${103}
-| | ... | ${dut_if1_ip} | ${tg_if1_ip}
-| | ${vxlan4}= | And Create VXLAN interface | ${dut_node} | ${104}
-| | ... | ${dut_if1_ip} | ${tg_if1_ip}
-| | And Set Interface State | ${dut_node} | ${vxlan1} | up
-| | And Set Interface State | ${dut_node} | ${vxlan2} | up
-| | And Set Interface State | ${dut_node} | ${vxlan3} | up
-| | And Set Interface State | ${dut_node} | ${vxlan4} | up
-| | ${vhost_if1}= | And Vpp Create Vhost User Interface | ${dut_node}
-| | ... | ${sock_vm1_1}
-| | ${vhost_if2}= | And Vpp Create Vhost User Interface | ${dut_node}
-| | ... | ${sock_vm1_2}
-| | ${vhost_if3}= | And Vpp Create Vhost User Interface | ${dut_node}
-| | ... | ${sock_vm2_1}
-| | ${vhost_if4}= | And Vpp Create Vhost User Interface | ${dut_node}
-| | ... | ${sock_vm2_2}
-| | And Set Interface State | ${dut_node} | ${vhost_if1} | up
-| | And Set Interface State | ${dut_node} | ${vhost_if2} | up
-| | And Set Interface State | ${dut_node} | ${vhost_if3} | up
-| | And Set Interface State | ${dut_node} | ${vhost_if4} | up
-| | And Vpp Add L2 Bridge Domain | ${dut_node} | ${101} | ${vxlan1}
-| | ... | ${vhost_if1}
-| | And Vpp Add L2 Bridge Domain | ${dut_node} | ${102} | ${vxlan2}
-| | ... | ${vhost_if2}
-| | And Vpp Add L2 Bridge Domain | ${dut_node} | ${103} | ${vxlan3}
-| | ... | ${vhost_if3}
-| | And Vpp Add L2 Bridge Domain | ${dut_node} | ${104} | ${vxlan4}
-| | ... | ${vhost_if4}
-| | And Configure QEMU vhost and run it VM | ${dut_node} | ${sock_vm1_1}
-| | ... | ${sock_vm1_2} | ${1}
-| | And Configure QEMU vhost and run it VM | ${dut_node} | ${sock_vm2_1}
-| | ... | ${sock_vm2_2} | ${2}
-| | And Check traffic through VM
-| | And Verify VPP PID in Teardown
-| | When Setup All Duts | ${nodes}
-| | And Save VPP PIDs
-| | And Set interfaces in 2-node circular topology up
-| | And Set Interface Address | ${dut_node} | ${dut_to_tg_if1} | ${dut_if1_ip}
-| | ... | ${prefix_length}
-| | And Add IP Neighbor | ${dut_node} | ${dut_to_tg_if1} | ${tg_if1_ip}
-| | ... | ${tg_to_dut_if1_mac}
-| | ${vxlan1}= | And Create VXLAN interface | ${dut_node} | ${101}
-| | ... | ${dut_if1_ip} | ${tg_if1_ip}
-| | ${vxlan2}= | And Create VXLAN interface | ${dut_node} | ${102}
-| | ... | ${dut_if1_ip} | ${tg_if1_ip}
-| | ${vxlan3}= | And Create VXLAN interface | ${dut_node} | ${103}
-| | ... | ${dut_if1_ip} | ${tg_if1_ip}
-| | ${vxlan4}= | And Create VXLAN interface | ${dut_node} | ${104}
-| | ... | ${dut_if1_ip} | ${tg_if1_ip}
-| | And Set Interface State | ${dut_node} | ${vxlan1} | up
-| | And Set Interface State | ${dut_node} | ${vxlan2} | up
-| | And Set Interface State | ${dut_node} | ${vxlan3} | up
-| | And Set Interface State | ${dut_node} | ${vxlan4} | up
-| | ${vhost_if1}= | And Vpp Create Vhost User Interface | ${dut_node}
-| | ... | ${sock_vm1_1}
-| | ${vhost_if2}= | And Vpp Create Vhost User Interface | ${dut_node}
-| | ... | ${sock_vm1_2}
-| | ${vhost_if3}= | And Vpp Create Vhost User Interface | ${dut_node}
-| | ... | ${sock_vm2_1}
-| | ${vhost_if4}= | And Vpp Create Vhost User Interface | ${dut_node}
-| | ... | ${sock_vm2_2}
-| | And Set Interface State | ${dut_node} | ${vhost_if1} | up
-| | And Set Interface State | ${dut_node} | ${vhost_if2} | up
-| | And Set Interface State | ${dut_node} | ${vhost_if3} | up
-| | And Set Interface State | ${dut_node} | ${vhost_if4} | up
-| | And Vpp Add L2 Bridge Domain | ${dut_node} | ${101} | ${vxlan1}
-| | ... | ${vhost_if1}
-| | And Vpp Add L2 Bridge Domain | ${dut_node} | ${102} | ${vxlan2}
-| | ... | ${vhost_if2}
-| | And Vpp Add L2 Bridge Domain | ${dut_node} | ${103} | ${vxlan3}
-| | ... | ${vhost_if3}
-| | And Vpp Add L2 Bridge Domain | ${dut_node} | ${104} | ${vxlan4}
-| | ... | ${vhost_if4}
-| | Then Check traffic through VM
-
-
-*** Keywords ***
-| Configure QEMU vhost and run it VM
-| | [Arguments] | ${dut_node} | ${sock1} | ${sock2} | ${qemu_id}
-| | Import Library | resources.libraries.python.QemuUtils | qemu_id=${qemu_id}
-| | ... | WITH NAME | qemu-${qemu_id}
-| | ${q_add_vhost}= | Replace Variables | qemu-${qemu_id}.Qemu Add Vhost User If
-| | ${q_set_node}= | Replace Variables | qemu-${qemu_id}.Qemu Set Node
-| | ${q_start}= | Replace Variables | qemu-${qemu_id}.Qemu Start
-| | Run keyword | ${q_set_node} | ${dut_node}
-| | Run keyword | ${q_add_vhost} | ${sock1}
-| | Run keyword | ${q_add_vhost} | ${sock2}
-| | ${vm}= | Run keyword | ${q_start}
-| | ${vhost1}= | Get Vhost User If Name By Sock | ${vm} | ${sock1}
-| | ${vhost2}= | Get Vhost User If Name By Sock | ${vm} | ${sock2}
-| | Linux Add Bridge | ${vm} | br0 | ${vhost1} | ${vhost2}
-| | Set Interface State | ${vm} | ${vhost1} | up | if_type=name
-| | Set Interface State | ${vm} | ${vhost2} | up | if_type=name
-| | Set Test Variable | ${qemu-${qemu_id}} | ${vm}
-
-| Check traffic through VM
-| | [Documentation] | Send VXLAN traffic through both configured VMs.
-| | Send VXLAN encapsulated packet and verify received packet | ${tg_node}
-| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1}
-| | ... | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_mac}
-| | ... | ${tg_if1_ip} | ${dut_if1_ip} | ${101}
-| | ... | ${dut_if1_ip} | ${tg_if1_ip} | ${102}
-| | Send VXLAN encapsulated packet and verify received packet | ${tg_node}
-| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1}
-| | ... | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_mac}
-| | ... | ${tg_if1_ip} | ${dut_if1_ip} | ${103}
-| | ... | ${dut_if1_ip} | ${tg_if1_ip} | ${104}