diff options
Diffstat (limited to 'tests/func/vlan/eth2p-dot1ad-l2bdbasemaclrn-vlantrans22-func.robot')
| -rw-r--r-- | tests/func/vlan/eth2p-dot1ad-l2bdbasemaclrn-vlantrans22-func.robot | 212 |
1 files changed, 106 insertions, 106 deletions
diff --git a/tests/func/vlan/eth2p-dot1ad-l2bdbasemaclrn-vlantrans22-func.robot b/tests/func/vlan/eth2p-dot1ad-l2bdbasemaclrn-vlantrans22-func.robot index 48edbd54f9..6efc508423 100644 --- a/tests/func/vlan/eth2p-dot1ad-l2bdbasemaclrn-vlantrans22-func.robot +++ b/tests/func/vlan/eth2p-dot1ad-l2bdbasemaclrn-vlantrans22-func.robot @@ -19,8 +19,8 @@ | Resource | resources/libraries/robot/l2_traffic.robot | Library | resources.libraries.python.Trace | Force Tags | 3_NODE_SINGLE_LINK_TOPO | HW_ENV | VM_ENV | SKIP_VPP_PATCH -| Test Setup | Func Test Setup -| Test Teardown | Func Test Teardown +| Test Setup | Set up functional test +| Test Teardown | Tear down functional test | Documentation | *L2BD with VLAN tag rewrite test cases - translate-2-2* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -68,33 +68,33 @@ | | ... | tagged with Dot1ad tags from one of its interfaces to another one | | ... | method. [Ver] Make TG send ICMPv4 Echo Req via DUT1 and DUT2; verify | | ... | that packet is received. [Ref] IEEE 802.1ad -| | Given Path for 3-node testing is set +| | Given Configure path in 3-node circular topology | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in 3-node path are up -| | ${vlan1_name} | ${vlan1_index}= | When Tagged Subinterface Created +| | And Set interfaces in 3-node circular topology up +| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface | | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} | | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} | | ... | type_subif=two_tags dot1ad -| | ${vlan2_name} | ${vlan2_index}= | And Tagged Subinterface Created +| | ${vlan2_name} | ${vlan2_index}= | And Create tagged sub-interface | | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} | | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2} | | ... | type_subif=two_tags dot1ad -| | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node} +| | And Configure L2 tag rewrite method on interface | ${dut1_node} | | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False} | | ... | tag1_id=${outer_vlan_id2} | tag2_id=${inner_vlan_id2} -| | And L2 Tag Rewrite Method Is Set On Interface | ${dut2_node} +| | And Configure L2 tag rewrite method on interface | ${dut2_node} | | ... | ${vlan2_index} | pop-2 -| | And Bridge domain on DUT node is created | ${dut1_node} | ${bd_id1} -| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_dut2} +| | And Create bridge domain | ${dut1_node} | ${bd_id1} +| | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_dut2} | | ... | ${bd_id1} -| | And Interface is added to bridge domain | ${dut1_node} | ${vlan1_index} +| | And Add interface to bridge domain | ${dut1_node} | ${vlan1_index} | | ... | ${bd_id1} -| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id1} -| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg} +| | And Create bridge domain | ${dut2_node} | ${bd_id1} +| | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_tg} | | ... | ${bd_id1} -| | And Interface is added to bridge domain | ${dut2_node} | ${vlan2_index} +| | And Add interface to bridge domain | ${dut2_node} | ${vlan2_index} | | ... | ${bd_id1} -| | Then Send and receive ICMP Packet +| | Then Send ICMP packet and verify received packet | | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} | encaps=Dot1ad | | ... | vlan1=${outer_vlan_id1} | vlan2=${inner_vlan_id1} @@ -111,34 +111,34 @@ | | ... | one method. [Ver] Make TG send ICMPv4 Echo Req via DUT1 and DUT2; | | ... | verify that packet is not received. [Ref] IEEE 802.1ad | | [Tags] | SKIP_PATCH -| | Given Path for 3-node testing is set +| | Given Configure path in 3-node circular topology | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in 3-node path are up -| | ${vlan1_name} | ${vlan1_index}= | When Tagged Subinterface Created +| | And Set interfaces in 3-node circular topology up +| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface | | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} | | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} | | ... | type_subif=two_tags dot1ad -| | ${vlan2_name} | ${vlan2_index}= | And Tagged Subinterface Created +| | ${vlan2_name} | ${vlan2_index}= | And Create tagged sub-interface | | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} | | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2} | | ... | type_subif=two_tags dot1ad -| | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node} +| | And Configure L2 tag rewrite method on interface | ${dut1_node} | | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False} | | ... | tag1_id=${outer_vlan_id2} | tag2_id=${inner_vlan_wrong} -| | And L2 Tag Rewrite Method Is Set On Interface | ${dut2_node} +| | And Configure L2 tag rewrite method on interface | ${dut2_node} | | ... | ${vlan2_index} | pop-2 -| | And Bridge domain on DUT node is created | ${dut1_node} | ${bd_id1} -| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_dut2} +| | And Create bridge domain | ${dut1_node} | ${bd_id1} +| | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_dut2} | | ... | ${bd_id1} -| | And Interface is added to bridge domain | ${dut1_node} | ${vlan1_index} +| | And Add interface to bridge domain | ${dut1_node} | ${vlan1_index} | | ... | ${bd_id1} -| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id1} -| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg} +| | And Create bridge domain | ${dut2_node} | ${bd_id1} +| | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_tg} | | ... | ${bd_id1} -| | And Interface is added to bridge domain | ${dut2_node} | ${vlan2_index} +| | And Add interface to bridge domain | ${dut2_node} | ${vlan2_index} | | ... | ${bd_id1} | | Then Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Send and receive ICMP Packet | ${tg_node} | ${tg_to_dut1} +| | ... | Send ICMP packet and verify received packet | ${tg_node} | ${tg_to_dut1} | | ... | ${tg_to_dut2} | encaps=Dot1ad | vlan1=${outer_vlan_id1} | | ... | vlan2=${inner_vlan_id1} @@ -155,34 +155,34 @@ | | ... | one method. [Ver] Make TG send ICMPv4 Echo Req via DUT1 and DUT2; | | ... | verify that packet is not received. [Ref] IEEE 802.1ad | | [Tags] | SKIP_PATCH -| | Given Path for 3-node testing is set +| | Given Configure path in 3-node circular topology | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in 3-node path are up -| | ${vlan1_name} | ${vlan1_index}= | When Tagged Subinterface Created +| | And Set interfaces in 3-node circular topology up +| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface | | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} | | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} | | ... | type_subif=two_tags dot1ad -| | ${vlan2_name} | ${vlan2_index}= | And Tagged Subinterface Created +| | ${vlan2_name} | ${vlan2_index}= | And Create tagged sub-interface | | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} | | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2} | | ... | type_subif=two_tags dot1ad -| | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node} +| | And Configure L2 tag rewrite method on interface | ${dut1_node} | | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False} | | ... | tag1_id=${outer_vlan_wrong} | tag2_id=${inner_vlan_id2} -| | And L2 Tag Rewrite Method Is Set On Interface | ${dut2_node} +| | And Configure L2 tag rewrite method on interface | ${dut2_node} | | ... | ${vlan2_index} | pop-2 -| | And Bridge domain on DUT node is created | ${dut1_node} | ${bd_id1} -| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_dut2} +| | And Create bridge domain | ${dut1_node} | ${bd_id1} +| | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_dut2} | | ... | ${bd_id1} -| | And Interface is added to bridge domain | ${dut1_node} | ${vlan1_index} +| | And Add interface to bridge domain | ${dut1_node} | ${vlan1_index} | | ... | ${bd_id1} -| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id1} -| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg} +| | And Create bridge domain | ${dut2_node} | ${bd_id1} +| | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_tg} | | ... | ${bd_id1} -| | And Interface is added to bridge domain | ${dut2_node} | ${vlan2_index} +| | And Add interface to bridge domain | ${dut2_node} | ${vlan2_index} | | ... | ${bd_id1} | | Then Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Send and receive ICMP Packet | ${tg_node} | ${tg_to_dut1} +| | ... | Send ICMP packet and verify received packet | ${tg_node} | ${tg_to_dut1} | | ... | ${tg_to_dut2} | encaps=Dot1ad | vlan1=${outer_vlan_id1} | | ... | vlan2=${inner_vlan_id1} @@ -199,34 +199,34 @@ | | ... | method. [Ver] Make TG send ICMPv4 Echo Req via DUT1 and DUT2; verify | | ... | that packet is not received. [Ref] IEEE 802.1ad | | [Tags] | SKIP_PATCH -| | Given Path for 3-node testing is set +| | Given Configure path in 3-node circular topology | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in 3-node path are up -| | ${vlan1_name} | ${vlan1_index}= | When Tagged Subinterface Created +| | And Set interfaces in 3-node circular topology up +| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface | | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} | | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} | | ... | type_subif=two_tags dot1ad -| | ${vlan2_name} | ${vlan2_index}= | And Tagged Subinterface Created +| | ${vlan2_name} | ${vlan2_index}= | And Create tagged sub-interface | | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} | | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2} | | ... | type_subif=two_tags dot1ad -| | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node} +| | And Configure L2 tag rewrite method on interface | ${dut1_node} | | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False} | | ... | tag1_id=${outer_vlan_wrong} | tag2_id=${inner_vlan_wrong} -| | And L2 Tag Rewrite Method Is Set On Interface | ${dut2_node} +| | And Configure L2 tag rewrite method on interface | ${dut2_node} | | ... | ${vlan2_index} | pop-2 -| | And Bridge domain on DUT node is created | ${dut1_node} | ${bd_id1} -| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_dut2} +| | And Create bridge domain | ${dut1_node} | ${bd_id1} +| | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_dut2} | | ... | ${bd_id1} -| | And Interface is added to bridge domain | ${dut1_node} | ${vlan1_index} +| | And Add interface to bridge domain | ${dut1_node} | ${vlan1_index} | | ... | ${bd_id1} -| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id1} -| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg} +| | And Create bridge domain | ${dut2_node} | ${bd_id1} +| | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_tg} | | ... | ${bd_id1} -| | And Interface is added to bridge domain | ${dut2_node} | ${vlan2_index} +| | And Add interface to bridge domain | ${dut2_node} | ${vlan2_index} | | ... | ${bd_id1} | | Then Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Send and receive ICMP Packet | ${tg_node} | ${tg_to_dut1} +| | ... | Send ICMP packet and verify received packet | ${tg_node} | ${tg_to_dut1} | | ... | ${tg_to_dut2} | encaps=Dot1ad | vlan1=${outer_vlan_id1} | | ... | vlan2=${inner_vlan_id1} @@ -241,33 +241,33 @@ | | ... | tagged with Dot1ad tags from one of its interfaces to another one | | ... | method. [Ver] Make TG send ICMPv6 Echo Req via DUT1 and DUT2; verify | | ... | that packet is received. [Ref] IEEE 802.1ad -| | Given Path for 3-node testing is set +| | Given Configure path in 3-node circular topology | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in 3-node path are up -| | ${vlan1_name} | ${vlan1_index}= | When Tagged Subinterface Created +| | And Set interfaces in 3-node circular topology up +| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface | | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} | | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} | | ... | type_subif=two_tags dot1ad -| | ${vlan2_name} | ${vlan2_index}= | And Tagged Subinterface Created +| | ${vlan2_name} | ${vlan2_index}= | And Create tagged sub-interface | | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} | | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2} | | ... | type_subif=two_tags dot1ad -| | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node} +| | And Configure L2 tag rewrite method on interface | ${dut1_node} | | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False} | | ... | tag1_id=${outer_vlan_id2} | tag2_id=${inner_vlan_id2} -| | And L2 Tag Rewrite Method Is Set On Interface | ${dut2_node} +| | And Configure L2 tag rewrite method on interface | ${dut2_node} | | ... | ${vlan2_index} | pop-2 -| | And Bridge domain on DUT node is created | ${dut1_node} | ${bd_id1} -| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_dut2} +| | And Create bridge domain | ${dut1_node} | ${bd_id1} +| | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_dut2} | | ... | ${bd_id1} -| | And Interface is added to bridge domain | ${dut1_node} | ${vlan1_index} +| | And Add interface to bridge domain | ${dut1_node} | ${vlan1_index} | | ... | ${bd_id1} -| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id1} -| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg} +| | And Create bridge domain | ${dut2_node} | ${bd_id1} +| | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_tg} | | ... | ${bd_id1} -| | And Interface is added to bridge domain | ${dut2_node} | ${vlan2_index} +| | And Add interface to bridge domain | ${dut2_node} | ${vlan2_index} | | ... | ${bd_id1} -| | Then Send and receive ICMP Packet +| | Then Send ICMP packet and verify received packet | | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} | src_ip=${src_ip6} | | ... | dst_ip=${dst_ip6} | encaps=Dot1ad | vlan1=${outer_vlan_id1} | | ... | vlan2=${inner_vlan_id1} @@ -285,34 +285,34 @@ | | ... | one method. [Ver] Make TG send ICMPv6 Echo Req via DUT1 and DUT2; | | ... | verify that packet is not received. [Ref] IEEE 802.1ad | | [Tags] | SKIP_PATCH -| | Given Path for 3-node testing is set +| | Given Configure path in 3-node circular topology | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in 3-node path are up -| | ${vlan1_name} | ${vlan1_index}= | When Tagged Subinterface Created +| | And Set interfaces in 3-node circular topology up +| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface | | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} | | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} | | ... | type_subif=two_tags dot1ad -| | ${vlan2_name} | ${vlan2_index}= | And Tagged Subinterface Created +| | ${vlan2_name} | ${vlan2_index}= | And Create tagged sub-interface | | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} | | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2} | | ... | type_subif=two_tags dot1ad -| | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node} +| | And Configure L2 tag rewrite method on interface | ${dut1_node} | | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False} | | ... | tag1_id=${outer_vlan_id2} | tag2_id=${inner_vlan_wrong} -| | And L2 Tag Rewrite Method Is Set On Interface | ${dut2_node} +| | And Configure L2 tag rewrite method on interface | ${dut2_node} | | ... | ${vlan2_index} | pop-2 -| | And Bridge domain on DUT node is created | ${dut1_node} | ${bd_id1} -| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_dut2} +| | And Create bridge domain | ${dut1_node} | ${bd_id1} +| | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_dut2} | | ... | ${bd_id1} -| | And Interface is added to bridge domain | ${dut1_node} | ${vlan1_index} +| | And Add interface to bridge domain | ${dut1_node} | ${vlan1_index} | | ... | ${bd_id1} -| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id1} -| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg} +| | And Create bridge domain | ${dut2_node} | ${bd_id1} +| | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_tg} | | ... | ${bd_id1} -| | And Interface is added to bridge domain | ${dut2_node} | ${vlan2_index} +| | And Add interface to bridge domain | ${dut2_node} | ${vlan2_index} | | ... | ${bd_id1} | | Then Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Send and receive ICMP Packet | ${tg_node} | ${tg_to_dut1} +| | ... | Send ICMP packet and verify received packet | ${tg_node} | ${tg_to_dut1} | | ... | ${tg_to_dut2} | src_ip=${src_ip6} | dst_ip=${dst_ip6} | encaps=Dot1ad | | ... | vlan1=${outer_vlan_id1} | vlan2=${inner_vlan_id1} @@ -329,34 +329,34 @@ | | ... | one method. [Ver] Make TG send ICMPv6 Echo Req via DUT1 and DUT2; | | ... | verify that packet is not received. [Ref] IEEE 802.1ad | | [Tags] | SKIP_PATCH -| | Given Path for 3-node testing is set +| | Given Configure path in 3-node circular topology | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in 3-node path are up -| | ${vlan1_name} | ${vlan1_index}= | When Tagged Subinterface Created +| | And Set interfaces in 3-node circular topology up +| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface | | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} | | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} | | ... | type_subif=two_tags dot1ad -| | ${vlan2_name} | ${vlan2_index}= | And Tagged Subinterface Created +| | ${vlan2_name} | ${vlan2_index}= | And Create tagged sub-interface | | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} | | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2} | | ... | type_subif=two_tags dot1ad -| | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node} +| | And Configure L2 tag rewrite method on interface | ${dut1_node} | | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False} | | ... | tag1_id=${outer_vlan_wrong} | tag2_id=${inner_vlan_id2} -| | And L2 Tag Rewrite Method Is Set On Interface | ${dut2_node} +| | And Configure L2 tag rewrite method on interface | ${dut2_node} | | ... | ${vlan2_index} | pop-2 -| | And Bridge domain on DUT node is created | ${dut1_node} | ${bd_id1} -| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_dut2} +| | And Create bridge domain | ${dut1_node} | ${bd_id1} +| | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_dut2} | | ... | ${bd_id1} -| | And Interface is added to bridge domain | ${dut1_node} | ${vlan1_index} +| | And Add interface to bridge domain | ${dut1_node} | ${vlan1_index} | | ... | ${bd_id1} -| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id1} -| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg} +| | And Create bridge domain | ${dut2_node} | ${bd_id1} +| | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_tg} | | ... | ${bd_id1} -| | And Interface is added to bridge domain | ${dut2_node} | ${vlan2_index} +| | And Add interface to bridge domain | ${dut2_node} | ${vlan2_index} | | ... | ${bd_id1} | | Then Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Send and receive ICMP Packet | ${tg_node} | ${tg_to_dut1} +| | ... | Send ICMP packet and verify received packet | ${tg_node} | ${tg_to_dut1} | | ... | ${tg_to_dut2} | src_ip=${src_ip6} | dst_ip=${dst_ip6} | encaps=Dot1ad | | ... | vlan1=${outer_vlan_id1} | vlan2=${inner_vlan_id1} @@ -373,33 +373,33 @@ | | ... | method. [Ver] Make TG send ICMPv6 Echo Req via DUT1 and DUT2; verify | | ... | that packet is not received. [Ref] IEEE 802.1ad | | [Tags] | SKIP_PATCH -| | Given Path for 3-node testing is set +| | Given Configure path in 3-node circular topology | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in 3-node path are up -| | ${vlan1_name} | ${vlan1_index}= | When Tagged Subinterface Created +| | And Set interfaces in 3-node circular topology up +| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface | | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} | | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} | | ... | type_subif=two_tags dot1ad -| | ${vlan2_name} | ${vlan2_index}= | And Tagged Subinterface Created +| | ${vlan2_name} | ${vlan2_index}= | And Create tagged sub-interface | | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} | | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2} | | ... | type_subif=two_tags dot1ad -| | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node} +| | And Configure L2 tag rewrite method on interface | ${dut1_node} | | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False} | | ... | tag1_id=${outer_vlan_wrong} | tag2_id=${inner_vlan_wrong} -| | And L2 Tag Rewrite Method Is Set On Interface | ${dut2_node} +| | And Configure L2 tag rewrite method on interface | ${dut2_node} | | ... | ${vlan2_index} | pop-2 -| | And Bridge domain on DUT node is created | ${dut1_node} | ${bd_id1} -| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_dut2} +| | And Create bridge domain | ${dut1_node} | ${bd_id1} +| | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_dut2} | | ... | ${bd_id1} -| | And Interface is added to bridge domain | ${dut1_node} | ${vlan1_index} +| | And Add interface to bridge domain | ${dut1_node} | ${vlan1_index} | | ... | ${bd_id1} -| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id1} -| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg} +| | And Create bridge domain | ${dut2_node} | ${bd_id1} +| | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_tg} | | ... | ${bd_id1} -| | And Interface is added to bridge domain | ${dut2_node} | ${vlan2_index} +| | And Add interface to bridge domain | ${dut2_node} | ${vlan2_index} | | ... | ${bd_id1} | | Then Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Send and receive ICMP Packet | ${tg_node} | ${tg_to_dut1} +| | ... | Send ICMP packet and verify received packet | ${tg_node} | ${tg_to_dut1} | | ... | ${tg_to_dut2} | src_ip=${src_ip6} | dst_ip=${dst_ip6} | encaps=Dot1ad | | ... | vlan1=${outer_vlan_id1} | vlan2=${inner_vlan_id1} |