aboutsummaryrefslogtreecommitdiffstats
path: root/tests/func/vlan
diff options
context:
space:
mode:
Diffstat (limited to 'tests/func/vlan')
-rw-r--r--tests/func/vlan/eth2p-dot1q-l2bdbasemaclrn-eth-2vhost-1vm-func.robot145
1 files changed, 145 insertions, 0 deletions
diff --git a/tests/func/vlan/eth2p-dot1q-l2bdbasemaclrn-eth-2vhost-1vm-func.robot b/tests/func/vlan/eth2p-dot1q-l2bdbasemaclrn-eth-2vhost-1vm-func.robot
new file mode 100644
index 0000000000..e2f0e3d9fd
--- /dev/null
+++ b/tests/func/vlan/eth2p-dot1q-l2bdbasemaclrn-eth-2vhost-1vm-func.robot
@@ -0,0 +1,145 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/default.robot
+| Resource | resources/libraries/robot/bridge_domain.robot
+| Resource | resources/libraries/robot/testing_path.robot
+| Resource | resources/libraries/robot/tagging.robot
+| Resource | resources/libraries/robot/l2_traffic.robot
+| Resource | resources/libraries/robot/qemu.robot
+| Resource | resources/libraries/robot/double_qemu_setup.robot
+| Library | resources.libraries.python.Trace
+| Force Tags | 3_NODE_DOUBLE_LINK_TOPO | HW_ENV | VM_ENV | VPP_VM_ENV
+| Test Setup | Func Test Setup
+| Test Teardown | Run Keywords | Show Packet Trace on All DUTs | ${nodes}
+| ... | AND | Show vpp trace dump on all DUTs
+| ... | AND | Stop and Clear QEMU | ${dut_node} | ${vm_node}
+| ... | AND | Check VPP PID in Teardown
+| Documentation | *L2 bridge domain with VLAN tag over VM test cases*
+| ...
+| ... | *[Top] Network Topologies:* TG=DUT 2-node circular topology
+| ... | with double links between nodes.
+| ... | *[Enc] Packet encapsulations:* Eth-dot1q-IPv4-ICMPv4 or
+| ... | Eth-dot1q-IPv6-ICMPv6 on TG=DUT and on DUT=VM.
+| ... | *[Cfg] DUT configuration:* DUT is configured with two bridge domains
+| ... | (L2BD) with MAC learning enabled; each one with added VLAN
+| ... | sub-interface towards TG and vhost-user interface to local VM. Configure
+| ... | linux bridge on VM to pass traffic between both vhost-user interfaces.
+| ... | *[Ver] TG verification:* Make TG send ICMPv4/ICMPv6 Echo Req between two
+| ... | of its interfaces to be switched by DUT via VM; verify packets are
+| ... | switched between these TG interfaces; on receive TG verifies packets for
+| ... | correctness and their IPv4 src-addr, dst-addr, MAC addresses and
+| ... | VLAN tag.
+| ... | *[Ref] Applicable standard specifications:* IEEE 802.1q.
+
+*** Variables ***
+| ${bd_id1}= | 1
+| ${bd_id2}= | 2
+
+| ${vlan_id1}= | 110
+| ${vlan_wrong}= | 150
+
+| ${sock1}= | /tmp/sock1
+| ${sock2}= | /tmp/sock2
+
+| ${ip4_1}= | 192.168.100.1
+| ${ip4_2}= | 192.168.100.2
+
+| ${ip6_1}= | 3ffe:63::1
+| ${ip6_2}= | 3ffe:63::2
+
+*** Test Cases ***
+| TC01: eth2p-dot1q-l2bdbasemaclrn-eth-2vhost-1vm - ipv4
+| | [Documentation]
+| | ... | [Top] TG=DUT.
+| | ... | [Enc] Eth-dot1q-IPv4-ICMPv4 on TG=DUT and on DUT=VM.
+| | ... | [Cfg] On DUT configure two L2BDs (MAC learning enabled); first L2BD
+| | ... | with Dot1Q tagged interface to TG-if1 and vhost-user interface to
+| | ... | local VM, second one with vhost-user interface to local VM and Dot1Q
+| | ... | tagged interface towards TG-if2. Configure linux bridge on VM to pass
+| | ... | traffic between both vhost-user interfaces.
+| | ... | [Ver] Make TG send ICMPv4 Echo Req tagged with one Dot1q tag
+| | ... | from one of its interfaces to another one via DUT and VM; verify
+| | ... | that packet is received.
+| | ... | [Ref] IEEE 802.1q
+| | ...
+| | Given Path for 2-node testing is set
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
+| | And Interfaces in 2-node path are up
+| | ${vlan1_name} | ${vlan1_index}= | When Vlan Subinterface Created
+| | ... | ${dut_node} | ${dut_to_tg_if1} | ${vlan_id1}
+| | ${vlan2_name} | ${vlan2_index}= | And Vlan Subinterface Created
+| | ... | ${dut_node} | ${dut_to_tg_if2} | ${vlan_id1}
+| | And VPP Vhost interfaces for L2BD forwarding are setup
+| | ... | ${dut_node} | ${sock1} | ${sock2}
+| | And VM for Vhost L2BD forwarding is setup
+| | ... | ${dut_node} | ${sock1} | ${sock2}
+| | And Interface is added to bridge domain | ${dut_node} | ${vlan1_index}
+| | ... | ${bd_id1}
+| | And Interface is added to bridge domain | ${dut_node} | ${vhost_if1}
+| | ... | ${bd_id1}
+| | And Interface is added to bridge domain | ${dut_node} | ${vlan2_index}
+| | ... | ${bd_id2}
+| | And Interface is added to bridge domain | ${dut_node} | ${vhost_if2}
+| | ... | ${bd_id2}
+| | Then Send and receive ICMP Packet
+| | ... | ${tg_node} | ${tg_to_dut_if1} | ${tg_to_dut_if2} | ${ip4_1} | ${ip4_2}
+| | ... | encaps=Dot1q | vlan1=${vlan_id1} | encaps_rx=Dot1q
+| | And Send and receive ICMP Packet
+| | ... | ${tg_node} | ${tg_to_dut_if2} | ${tg_to_dut_if1} | ${ip4_2} | ${ip4_1}
+| | ... | encaps=Dot1q | vlan1=${vlan_id1} | encaps_rx=Dot1q
+
+| TC01: eth2p-dot1q-l2bdbasemaclrn-eth-2vhost-1vm - ipv6
+| | [Documentation]
+| | ... | [Top] TG=DUT.
+| | ... | [Enc] Eth-dot1q-IPv6-ICMPv6 on TG=DUT and on DUT=VM.
+| | ... | [Cfg] On DUT configure two L2BDs (MAC learning enabled); first L2BD
+| | ... | with Dot1Q tagged interface to TG-if1 and vhost-user interface to
+| | ... | local VM, second one with vhost-user interface to local VM and Dot1Q
+| | ... | tagged interface towards TG-if2. Configure linux bridge on VM to pass
+| | ... | traffic between both vhost-user interfaces.
+| | ... | [Ver] Make TG send ICMPv6 Echo Req tagged with one Dot1q tag
+| | ... | from one of its interfaces to another one via DUT and VM; verify
+| | ... | that packet is received.
+| | ... | [Ref] IEEE 802.1q
+| | ...
+| | Given Path for 2-node testing is set
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
+| | And Interfaces in 2-node path are up
+| | ${vlan1_name} | ${vlan1_index}= | When Vlan Subinterface Created
+| | ... | ${dut_node} | ${dut_to_tg_if1} | ${vlan_id1}
+| | ${vlan2_name} | ${vlan2_index}= | And Vlan Subinterface Created
+| | ... | ${dut_node} | ${dut_to_tg_if2} | ${vlan_id1}
+| | And VPP Vhost interfaces for L2BD forwarding are setup
+| | ... | ${dut_node} | ${sock1} | ${sock2}
+| | And VM for Vhost L2BD forwarding is setup
+| | ... | ${dut_node} | ${sock1} | ${sock2}
+| | And Interface is added to bridge domain | ${dut_node} | ${vlan1_index}
+| | ... | ${bd_id1}
+| | And Interface is added to bridge domain | ${dut_node} | ${vhost_if1}
+| | ... | ${bd_id1}
+| | And Interface is added to bridge domain | ${dut_node} | ${vlan2_index}
+| | ... | ${bd_id2}
+| | And Interface is added to bridge domain | ${dut_node} | ${vhost_if2}
+| | ... | ${bd_id2}
+| | Then Send and receive ICMP Packet
+| | ... | ${tg_node} | ${tg_to_dut_if1} | ${tg_to_dut_if2} | ${ip6_1} | ${ip6_2}
+| | ... | encaps=Dot1q | vlan1=${vlan_id1} | encaps_rx=Dot1q
+| | And Send and receive ICMP Packet
+| | ... | ${tg_node} | ${tg_to_dut_if2} | ${tg_to_dut_if1} | ${ip6_2} | ${ip6_1}
+| | ... | encaps=Dot1q | vlan1=${vlan_id1} | encaps_rx=Dot1q
+
+
+
+