diff options
Diffstat (limited to 'tests/func')
95 files changed, 5494 insertions, 3395 deletions
diff --git a/tests/func/bridge_domain/bridge_domain_untagged.robot b/tests/func/bridge_domain/bridge_domain_untagged.robot deleted file mode 100644 index 346ce86c92..0000000000 --- a/tests/func/bridge_domain/bridge_domain_untagged.robot +++ /dev/null @@ -1,374 +0,0 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/default.robot -| Resource | resources/libraries/robot/bridge_domain.robot -| Resource | resources/libraries/robot/testing_path.robot -| Resource | resources/libraries/robot/qemu.robot -| Library | resources.libraries.python.Trace -| Force Tags | HW_ENV | VM_ENV -| Test Setup | Func Test Setup -| Test Teardown | Func Test Teardown -| Documentation | *L2 bridge-domain test cases* -| ... -| ... | *[Top] Network Topologies:* TG=DUT1 2-node topology with two links -| ... | between nodes; TG-DUT1-DUT2-TG 3-node circular topology with -| ... | single links between nodes; TG=DUT1=DUT2=TG 3-node circular -| ... | topology with double parallel links and TG=DUT=VM 3-node topology -| ... | with VM and double parallel links. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for L2 switching of -| ... | IPv4; Eth-IPv6-ICMPv6 for L2 switching of IPv6 use. Both apply -| ... | to all links. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 -| ... | bridge-domain (L2BD) switching combined with static MACs; MAC -| ... | learning enabled and Split Horizon Groups (SHG) depending on -| ... | test case. -| ... | *[Ver] TG verification:* Test ICMPv4 (or ICMPv6) Echo Request packets -| ... | are sent in both directions by TG on links to DUT1 and DUT2; on -| ... | receive TG verifies packets for correctness and their IPv4 (IPv6) -| ... | src-addr, dst-addr and MAC addresses. -| ... | *[Ref] Applicable standard specifications:* - -*** Variables *** -| ${bd_id1}= | 1 -| ${bd_id2}= | 2 -| ${shg1}= | 3 -| ${shg2}= | 4 -| ${sock1}= | /tmp/sock1 -| ${sock2}= | /tmp/sock2 - -*** Test Cases *** -| TC01: DUT reports active interfaces -| | [Documentation] -| | ... | [Top] TG=DUT1; TG-DUT1-DUT2-TG. [Enc] None. [Cfg] Discovered \ -| | ... | active interfaces. [Ver] Report active interfaces on DUT. [Ref] -| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO | 3_NODE_SINGLE_LINK_TOPO -| | VPP reports interfaces on | ${nodes['DUT1']} - -| TC02: DUT with L2BD (MAC learning) switch ICMPv4 between two TG links -| | [Documentation] -| | ... | [Top] TG=DUT1. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT1 configure \ -| | ... | two i/fs into L2BD with MAC learning. [Ver] Make TG verify -| | ... | ICMPv4 Echo Req pkts are switched thru DUT1 in both directions -| | ... | and are correct on receive. [Ref] -| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO -| | Given Path for 2-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Interfaces in 2-node path are up -| | When Bridge domain on DUT node is created | ${dut_node} | ${bd_id1} -| | And Interface is added to bridge domain | ${dut_node} | ${dut_to_tg_if1} -| | ... | ${bd_id1} -| | And Interface is added to bridge domain | ${dut_node} | ${dut_to_tg_if2} -| | ... | ${bd_id1} -| | Then Send and receive ICMPv4 bidirectionally | ${tg_node} | ${tg_to_dut_if1} -| | ... | ${tg_to_dut_if2} - -| TC03: DUT1 and DUT2 with L2BD (MAC learning) switch between two TG links -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT1 and DUT2 \ -| | ... | configure two i/fs into L2BD with MAC learning. [Ver] Make TG -| | ... | verify ICMPv4 Echo Req pkts are switched thru DUT1 and DUT2 in -| | ... | both directions and are correct on receive. [Ref] -| | [Tags] | 3_NODE_SINGLE_LINK_TOPO -| | Given Path for 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in 3-node path are up -| | When Bridge domain on DUT node is created | ${dut1_node} | ${bd_id1} -| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_tg} -| | ... | ${bd_id1} -| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_dut2} -| | ... | ${bd_id1} -| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id2} -| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg} -| | ... | ${bd_id2} -| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_dut1} -| | ... | ${bd_id2} -| | Then Send and receive ICMPv4 bidirectionally | ${tg_node} | ${tg_to_dut1} -| | ... | ${tg_to_dut2} - -| TC04: DUT1 and DUT2 with L2BD (static MACs) switch between two TG links -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT1 and \ -| | ... | DUT2 configure two i/fs into L2BD with static MACs. [Ver] Make -| | ... | TG verify ICMPv4 Echo Req pkts are switched thru DUT1 and DUT2 -| | ... | in both directions and are correct on receive. [Ref] -| | [Tags] | 3_NODE_SINGLE_LINK_TOPO -| | Given Path for 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in 3-node path are up -| | When Bridge domain on DUT node is created | ${dut1_node} | ${bd_id1} -| | ... | learn=${FALSE} -| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_tg} -| | ... | ${bd_id1} -| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_dut2} -| | ... | ${bd_id1} -| | And Destination port is added to L2FIB on DUT node | ${tg_node} -| | ... | ${tg_to_dut1} -| | ... | ${dut1_node} -| | ... | ${dut1_to_tg} -| | ... | ${bd_id1} -| | And Destination port is added to L2FIB on DUT node | ${tg_node} -| | ... | ${tg_to_dut2} -| | ... | ${dut1_node} -| | ... | ${dut1_to_dut2} -| | ... | ${bd_id1} -| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id2} -| | ... | learn=${FALSE} -| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg} -| | ... | ${bd_id2} -| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_dut1} -| | ... | ${bd_id2} -| | And Destination port is added to L2FIB on DUT node | ${tg_node} -| | ... | ${tg_to_dut1} -| | ... | ${dut2_node} -| | ... | ${dut2_to_dut1} -| | ... | ${bd_id2} -| | And Destination port is added to L2FIB on DUT node | ${tg_node} -| | ... | ${tg_to_dut2} -| | ... | ${dut2_node} -| | ... | ${dut2_to_tg} -| | ... | ${bd_id2} -| | Then Send and receive ICMPv4 bidirectionally | ${tg_node} | ${tg_to_dut1} -| | ... | ${tg_to_dut2} - -| TC05: DUT1 and DUT2 with L2BD (MAC learn) and SHG switch between four TG links -| | [Documentation] -| | ... | [Top] TG=DUT1=DUT2=TG. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT1 and \ -| | ... | DUT2 configure four i/fs into L2BD with MAC learning and the -| | ... | same SHG on i/fs towards TG. [Ver] Make TG verify ICMPv4 Echo -| | ... | Req pkts are switched thru DUT1 and DUT2 in both directions and -| | ... | are correct on receive; verify no pkts are switched thru SHG -| | ... | isolated interfaces. [Ref] -| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO -| | Given Path for 3-node BD-SHG testing is set | ${nodes['TG']} -| | ... | ${nodes['DUT1']} -| | ... | ${nodes['DUT2']} -| | And Interfaces in 3-node BD-SHG testing are up -| | When Bridge domain on DUT node is created | ${dut1_node} | ${bd_id1} -| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_tg_if1} -| | ... | ${bd_id1} | ${shg1} -| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_tg_if2} -| | ... | ${bd_id1} | ${shg1} -| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_dut2} -| | ... | ${bd_id1} -| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id2} -| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg_if1} -| | ... | ${bd_id2} | ${shg2} -| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg_if2} -| | ... | ${bd_id2} | ${shg2} -| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_dut1} -| | ... | ${bd_id2} -| | Then Send and receive ICMPv4 bidirectionally | ${tg_node} -| | ... | ${tg_to_dut1_if1} -| | ... | ${tg_to_dut2_if1} -| | And Send and receive ICMPv4 bidirectionally | ${tg_node} -| | ... | ${tg_to_dut1_if1} -| | ... | ${tg_to_dut2_if2} -| | And Send and receive ICMPv4 bidirectionally | ${tg_node} -| | ... | ${tg_to_dut1_if2} -| | ... | ${tg_to_dut2_if1} -| | And Send and receive ICMPv4 bidirectionally | ${tg_node} -| | ... | ${tg_to_dut1_if2} -| | ... | ${tg_to_dut2_if2} -| | And Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Send and receive ICMPv4 bidirectionally -| | | ... | ${tg_node} | ${tg_to_dut1_if1} -| | | ... | ${tg_to_dut1_if2} -| | And Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Send and receive ICMPv4 bidirectionally -| | | ... | ${tg_node} | ${tg_to_dut2_if1} -| | | ... | ${tg_to_dut2_if2} - -| TC06: DUT with two L2BDs (MAC learn) switches ICMPv4 between TG and VM links -| | [Documentation] -| | ... | [Top] TG=DUT=VM. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT1 configure \ -| | ... | two L2BDs with MAC learning, each with vhost-user i/f to local -| | ... | VM and i/f to TG; configure VM to loop pkts back betwen its two -| | ... | virtio i/fs. [Ver] Make TG verify ICMPv4 Echo Req pkts are -| | ... | switched thru DUT1 and VM in both directions and are correct on -| | ... | receive. [Ref] -| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO | VPP_VM_ENV -| | Given Path for 2-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Interfaces in 2-node path are up -| | When VPP Vhost interfaces for L2BD forwarding are setup | ${dut_node} -| | ... | ${sock1} -| | ... | ${sock2} -| | And Bridge domain on DUT node is created | ${dut_node} | ${bd_id1} -| | And Interface is added to bridge domain | ${dut_node} | ${dut_to_tg_if1} -| | ... | ${bd_id1} -| | And Interface is added to bridge domain | ${dut_node} | ${vhost_if1} -| | ... | ${bd_id1} -| | And Bridge domain on DUT node is created | ${dut_node} | ${bd_id2} -| | And Interface is added to bridge domain | ${dut_node} | ${dut_to_tg_if2} -| | ... | ${bd_id2} -| | And Interface is added to bridge domain | ${dut_node} | ${vhost_if2} -| | ... | ${bd_id2} -| | And VM for Vhost L2BD forwarding is setup | ${dut_node} | ${sock1} -| | ... | ${sock2} -| | Then Send and receive ICMPv4 bidirectionally | ${tg_node} | ${tg_to_dut_if1} -| | ... | ${tg_to_dut_if2} -| | [Teardown] | Run Keywords | Show Packet Trace on All DUTs | ${nodes} -| | ... | AND | Show vpp trace dump on all DUTs -| | ... | AND | Stop and Clear QEMU | ${dut_node} | ${vm_node} -| | ... | AND | Check VPP PID in Teardown - -| TC07: DUT with two L2BDs (MAC learn) switches ICMPv6 between TG and VM links -| | [Documentation] -| | ... | [Top] TG=DUT=VM. [Enc] Eth-IPv6-ICMPv6. [Cfg] On DUT1 configure \ -| | ... | two L2BDs with MAC learning, each with vhost-user i/f to local -| | ... | VM and i/f to TG; configure VM to loop pkts back betwen its two -| | ... | virtio i/fs. [Ver] Make TG verify ICMPv6 Echo Req pkts are -| | ... | switched thru DUT1 and VM in both directions and are correct on -| | ... | receive. [Ref] -| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO | VPP_VM_ENV -| | Given Path for 2-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Interfaces in 2-node path are up -| | When VPP Vhost interfaces for L2BD forwarding are setup | ${dut_node} -| | ... | ${sock1} -| | ... | ${sock2} -| | And Bridge domain on DUT node is created | ${dut_node} | ${bd_id1} -| | And Interface is added to bridge domain | ${dut_node} | ${dut_to_tg_if1} -| | ... | ${bd_id1} -| | And Interface is added to bridge domain | ${dut_node} | ${vhost_if1} -| | ... | ${bd_id1} -| | And Bridge domain on DUT node is created | ${dut_node} | ${bd_id2} -| | And Interface is added to bridge domain | ${dut_node} | ${dut_to_tg_if2} -| | ... | ${bd_id2} -| | And Interface is added to bridge domain | ${dut_node} | ${vhost_if2} -| | ... | ${bd_id2} -| | And VM for Vhost L2BD forwarding is setup | ${dut_node} | ${sock1} -| | ... | ${sock2} -| | Then Send and receive ICMPv6 bidirectionally | ${tg_node} | ${tg_to_dut_if1} -| | ... | ${tg_to_dut_if2} -| | [Teardown] | Run Keywords | Show Packet Trace on All DUTs | ${nodes} -| | ... | AND | Show vpp trace dump on all DUTs -| | ... | AND | Stop and Clear QEMU | ${dut_node} | ${vm_node} -| | ... | AND | Check VPP PID in Teardown - -| TC08: DUT with two L2BDs (static MACs) switches ICMPv4 between TG and VM links -| | [Documentation] -| | ... | [Top] TG=DUT=VM. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT1 configure \ -| | ... | two L2BDs with static MACs, each with vhost-user i/f to local VM -| | ... | and i/f to TG; configure VM to loop pkts back betwen its two -| | ... | virtio i/fs. [Ver] Make TG verify ICMPv4 Echo Req pkts are -| | ... | switched thru DUT1 and VM in both directions and are correct on -| | ... | receive. [Ref] -| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO | VPP_VM_ENV -| | Given Path for 2-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Interfaces in 2-node path are up -| | When VPP Vhost interfaces for L2BD forwarding are setup | ${dut_node} -| | ... | ${sock1} -| | ... | ${sock2} -| | And Bridge domain on DUT node is created | ${dut_node} | ${bd_id1} -| | ... | learn=${FALSE} -| | And Interface is added to bridge domain | ${dut_node} | ${dut_to_tg_if1} -| | ... | ${bd_id1} -| | And Interface is added to bridge domain | ${dut_node} | ${vhost_if1} -| | ... | ${bd_id1} -| | And Destination port is added to L2FIB on DUT node | ${tg_node} -| | ... | ${tg_to_dut_if1} -| | ... | ${dut_node} -| | ... | ${dut_to_tg_if1} -| | ... | ${bd_id1} -| | And Destination port is added to L2FIB on DUT node | ${tg_node} -| | ... | ${tg_to_dut_if2} -| | ... | ${dut_node} -| | ... | ${vhost_if1} -| | ... | ${bd_id1} -| | And Bridge domain on DUT node is created | ${dut_node} | ${bd_id2} -| | ... | learn=${FALSE} -| | And Interface is added to bridge domain | ${dut_node} | ${dut_to_tg_if2} -| | ... | ${bd_id2} -| | And Interface is added to bridge domain | ${dut_node} | ${vhost_if2} -| | ... | ${bd_id2} -| | And Destination port is added to L2FIB on DUT node | ${tg_node} -| | ... | ${tg_to_dut_if2} -| | ... | ${dut_node} -| | ... | ${dut_to_tg_if2} -| | ... | ${bd_id2} -| | And Destination port is added to L2FIB on DUT node | ${tg_node} -| | ... | ${tg_to_dut_if1} -| | ... | ${dut_node} -| | ... | ${vhost_if2} -| | ... | ${bd_id2} -| | And VM for Vhost L2BD forwarding is setup | ${dut_node} | ${sock1} -| | ... | ${sock2} -| | Then Send and receive ICMPv4 bidirectionally | ${tg_node} | ${tg_to_dut_if1} -| | ... | ${tg_to_dut_if2} -| | [Teardown] | Run Keywords | Show Packet Trace on All DUTs | ${nodes} -| | ... | AND | Show vpp trace dump on all DUTs -| | ... | AND | Stop and Clear QEMU | ${dut_node} | ${vm_node} -| | ... | AND | Check VPP PID in Teardown - -| TC09: DUT with two L2BDs (static MACs) switches ICMPv6 between TG and VM links -| | [Documentation] -| | ... | [Top] TG=DUT=VM. [Enc] Eth-IPv6-ICMPv6. [Cfg] On DUT1 configure \ -| | ... | two L2BDs with static MACs, each with vhost-user i/f to local VM -| | ... | and i/f to TG; configure VM to loop pkts back betwen its two -| | ... | virtio i/fs. [Ver] Make TG verify ICMPv6 Echo Req pkts are -| | ... | switched thru DUT1 and VM in both directions and are correct on -| | ... | receive. [Ref] -| | ... -| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO | VPP_VM_ENV -| | ... -| | [Teardown] | Run Keywords | Show Packet Trace on All DUTs | ${nodes} -| | ... | AND | Show vpp trace dump on all DUTs -| | ... | AND | Stop and Clear QEMU | ${dut_node} | ${vm_node} -| | ... | AND | Check VPP PID in Teardown -| | ... -| | Given Path for 2-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Interfaces in 2-node path are up -| | When VPP Vhost interfaces for L2BD forwarding are setup | ${dut_node} -| | ... | ${sock1} -| | ... | ${sock2} -| | And Bridge domain on DUT node is created | ${dut_node} | ${bd_id1} -| | ... | learn=${FALSE} -| | And Interface is added to bridge domain | ${dut_node} | ${dut_to_tg_if1} -| | ... | ${bd_id1} -| | And Interface is added to bridge domain | ${dut_node} | ${vhost_if1} -| | ... | ${bd_id1} -| | And Destination port is added to L2FIB on DUT node | ${tg_node} -| | ... | ${tg_to_dut_if1} -| | ... | ${dut_node} -| | ... | ${dut_to_tg_if1} -| | ... | ${bd_id1} -| | And Destination port is added to L2FIB on DUT node | ${tg_node} -| | ... | ${tg_to_dut_if2} -| | ... | ${dut_node} -| | ... | ${vhost_if1} -| | ... | ${bd_id1} -| | And Bridge domain on DUT node is created | ${dut_node} | ${bd_id2} -| | ... | learn=${FALSE} -| | And Interface is added to bridge domain | ${dut_node} | ${dut_to_tg_if2} -| | ... | ${bd_id2} -| | And Interface is added to bridge domain | ${dut_node} | ${vhost_if2} -| | ... | ${bd_id2} -| | And Destination port is added to L2FIB on DUT node | ${tg_node} -| | ... | ${tg_to_dut_if2} -| | ... | ${dut_node} -| | ... | ${dut_to_tg_if2} -| | ... | ${bd_id2} -| | And Destination port is added to L2FIB on DUT node | ${tg_node} -| | ... | ${tg_to_dut_if1} -| | ... | ${dut_node} -| | ... | ${vhost_if2} -| | ... | ${bd_id2} -| | And VM for Vhost L2BD forwarding is setup | ${dut_node} | ${sock1} -| | ... | ${sock2} -| | Then Send and receive ICMPv6 bidirectionally | ${tg_node} | ${tg_to_dut_if1} -| | ... | ${tg_to_dut_if2} diff --git a/tests/func/cop_base/eth2p-ethip4-ip4base-copblklistbase-func.robot b/tests/func/cop_base/eth2p-ethip4-ip4base-copblklistbase-func.robot new file mode 100644 index 0000000000..37e55c0666 --- /dev/null +++ b/tests/func/cop_base/eth2p-ethip4-ip4base-copblklistbase-func.robot @@ -0,0 +1,92 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Library | resources.libraries.python.Trace +| Library | resources.libraries.python.Cop +| Resource | resources/libraries/robot/default.robot +| Resource | resources/libraries/robot/interfaces.robot +| Resource | resources/libraries/robot/ipv4.robot +| Resource | resources/libraries/robot/traffic.robot +| Resource | resources/libraries/robot/testing_path.robot +| Resource | resources/libraries/robot/l2_xconnect.robot +| Variables | resources/libraries/python/IPv4NodeAddress.py | ${nodes} +| Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO +| Test Setup | Func Test Setup +| Test Teardown | Func Test Teardown +| Documentation | *COP Security IPv4 Blacklist Tests* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 on all links. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and +| ... | static routes. COP security black-lists are applied on DUT1 ingress +| ... | interface from TG. DUT2 is configured with L2XC. +| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are sent in +| ... | one direction by TG on link to DUT1; on receive TG verifies packets for +| ... | correctness and drops as applicable. +| ... | *[Ref] Applicable standard specifications:* + +*** Variables *** +| ${tg_node}= | ${nodes['TG']} +| ${dut1_node}= | ${nodes['DUT1']} +| ${dut2_node}= | ${nodes['DUT2']} + +| ${dut1_if1_ip}= | 192.168.1.1 +| ${dut1_if2_ip}= | 192.168.2.1 +| ${dut1_if1_ip_GW}= | 192.168.1.2 +| ${dut1_if2_ip_GW}= | 192.168.2.2 + +| ${test_dst_ip}= | 32.0.0.1 +| ${test_src_ip}= | 16.0.0.1 + +| ${cop_dut_ip}= | 16.0.0.0 + +| ${ip_prefix}= | 24 +| ${nodes_ipv4_addresses}= | ${nodes_ipv4_addr} + +| ${fib_table_number}= | 1 + +*** Test Cases *** +| TC01: DUT drops IPv4 pkts with COP blacklist set with IPv4 src-addr +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT1 \ +| | ... | configure interface IPv4 addresses and routes in the main +| | ... | routing domain, add COP blacklist on interface to TG with IPv4 +| | ... | src-addr matching packets generated by TG; on DUT2 configure L2 +| | ... | xconnect. [Ver] Make TG send ICMPv4 Echo Req on its interface to +| | ... | DUT1; verify no ICMPv4 Echo Req pkts are received. [Ref] +| | Given Path for 3-node testing is set +| | ... | ${tg_node} | ${dut1_node} | ${dut2_node} | ${tg_node} +| | And Interfaces in 3-node path are up +| | And L2 setup xconnect on DUT +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg} +| | And Set Interface Address +| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_if1_ip} | ${ip_prefix} +| | And Set Interface Address +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_if2_ip} | ${ip_prefix} +| |Â And Add Arp On Dut +| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_if1_ip_GW} | ${tg_to_dut1_mac} +| |Â And Add Arp On Dut +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_if2_ip_GW} | ${tg_to_dut2_mac} +| | And Vpp Route Add | ${dut1_node} +| | ... | ${test_dst_ip} | ${ip_prefix} | ${dut1_if2_ip_GW} | ${dut1_to_dut2} +| | And Add fib table | ${dut1_node} +| | ... | ${cop_dut_ip} | ${ip_prefix} | ${fib_table_number} |Â drop +| | When COP Add whitelist Entry +| | ... | ${dut1_node} | ${dut1_to_tg} | ip4 | ${fib_table_number} +| | And COP interface enable or disable | ${dut1_node} | ${dut1_to_tg} | enable +| | Then Send packet from Port to Port should failed | ${tg_node} +| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac} +| | ... | ${dut1_to_tg_mac} | ${tg_to_dut2} | ${dut1_to_dut2_mac} +| | ... | ${tg_to_dut2_mac} diff --git a/tests/func/cop/cop_whitelist_blacklist.robot b/tests/func/cop_base/eth2p-ethip4-ip4base-copwhlistbase-func.robot index be6b476062..eb8be688d9 100644 --- a/tests/func/cop/cop_whitelist_blacklist.robot +++ b/tests/func/cop_base/eth2p-ethip4-ip4base-copwhlistbase-func.robot @@ -24,7 +24,7 @@ | Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO | Test Setup | Func Test Setup | Test Teardown | Func Test Teardown -| Documentation | *COP Security IPv4 Blacklist and Whitelist Tests* +| Documentation | *COP Security IPv4 Whitelist Tests* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology | ... | with single links between nodes. @@ -90,36 +90,3 @@ | | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac} | | ... | ${dut1_to_tg_mac} | ${tg_to_dut2} | ${dut1_to_dut2_mac} | | ... | ${tg_to_dut2_mac} - -| TC02: DUT drops IPv4 pkts with COP blacklist set with IPv4 src-addr -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT1 \ -| | ... | configure interface IPv4 addresses and routes in the main -| | ... | routing domain, add COP blacklist on interface to TG with IPv4 -| | ... | src-addr matching packets generated by TG; on DUT2 configure L2 -| | ... | xconnect. [Ver] Make TG send ICMPv4 Echo Req on its interface to -| | ... | DUT1; verify no ICMPv4 Echo Req pkts are received. [Ref] -| | Given Path for 3-node testing is set -| | ... | ${tg_node} | ${dut1_node} | ${dut2_node} | ${tg_node} -| | And Interfaces in 3-node path are up -| | And L2 setup xconnect on DUT -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg} -| | And Set Interface Address -| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_if1_ip} | ${ip_prefix} -| | And Set Interface Address -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_if2_ip} | ${ip_prefix} -| |Â And Add Arp On Dut -| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_if1_ip_GW} | ${tg_to_dut1_mac} -| |Â And Add Arp On Dut -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_if2_ip_GW} | ${tg_to_dut2_mac} -| | And Vpp Route Add | ${dut1_node} -| | ... | ${test_dst_ip} | ${ip_prefix} | ${dut1_if2_ip_GW} | ${dut1_to_dut2} -| | And Add fib table | ${dut1_node} -| | ... | ${cop_dut_ip} | ${ip_prefix} | ${fib_table_number} |Â drop -| | When COP Add whitelist Entry -| | ... | ${dut1_node} | ${dut1_to_tg} | ip4 | ${fib_table_number} -| | And COP interface enable or disable | ${dut1_node} | ${dut1_to_tg} | enable -| | Then Send packet from Port to Port should failed | ${tg_node} -| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac} -| | ... | ${dut1_to_tg_mac} | ${tg_to_dut2} | ${dut1_to_dut2_mac} -| | ... | ${tg_to_dut2_mac} diff --git a/tests/func/cop_base/eth2p-ethip6-ip6base-copblklistbase-func.robot b/tests/func/cop_base/eth2p-ethip6-ip6base-copblklistbase-func.robot new file mode 100644 index 0000000000..7511dfe31b --- /dev/null +++ b/tests/func/cop_base/eth2p-ethip6-ip6base-copblklistbase-func.robot @@ -0,0 +1,101 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Library | resources.libraries.python.Trace +| Library | resources.libraries.python.Cop +| Resource | resources/libraries/robot/default.robot +| Resource | resources/libraries/robot/interfaces.robot +| Resource | resources/libraries/robot/ipv6.robot +| Resource | resources/libraries/robot/traffic.robot +| Resource | resources/libraries/robot/testing_path.robot +| Resource | resources/libraries/robot/l2_xconnect.robot +| Variables | resources/libraries/python/IPv6NodesAddr.py | ${nodes} +| Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO +| Test Setup | Func Test Setup +| Test Teardown | Func Test Teardown +| Documentation | *COP Security IPv6 Blacklist Tests* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-ICMPv6 on all links. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6 routing and +| ... | static routes. COP security black-lists are applied on DUT1 ingress +| ... | interface from TG. DUT2 is configured with L2XC. +| ... | *[Ver] TG verification:* Test ICMPv6 Echo Request packets are sent in +| ... | one direction by TG on link to DUT1; on receive TG verifies packets for +| ... | correctness and drops as applicable. +| ... | *[Ref] Applicable standard specifications:* + +*** Variables *** +| ${tg_node}= | ${nodes['TG']} +| ${dut1_node}= | ${nodes['DUT1']} +| ${dut2_node}= | ${nodes['DUT2']} + +| ${dut1_if1_ip}= | 3ffe:62::1 +| ${dut1_if2_ip}= | 3ffe:63::1 +| ${dut1_if1_ip_GW}= | 3ffe:62::2 +| ${dut1_if2_ip_GW}= | 3ffe:63::2 + +| ${dut2_if1_ip}= | 3ffe:72::1 +| ${dut2_if2_ip}= | 3ffe:73::1 + +| ${test_dst_ip}= | 3ffe:64::1 +| ${test_src_ip}= | 3ffe:61::1 + +| ${cop_dut_ip}= | 3ffe:61:: + +| ${ip_prefix}= | 64 + +| ${nodes_ipv6_addresses}= | ${nodes_ipv6_addr} + +| ${fib_table_number}= | 1 + +*** Test Cases *** +| TC01: DUT drops IPv6 pkts with COP blacklist set with IPv6 src-addr +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv6-ICMPv6. [Cfg] On DUT1 \ +| | ... | configure interface IPv6 addresses and routes in the main +| | ... | routing domain, add COP blacklist on interface to TG with IPv6 +| | ... | src-addr matching packets generated by TG; on DUT2 configure L2 +| | ... | xconnect. [Ver] Make TG send ICMPv6 Echo Req on its interface to +| | ... | DUT1; verify no ICMPv6 Echo Req pkts are received. [Ref] +| | Given Path for 3-node testing is set +| | ... | ${tg_node} | ${dut1_node} | ${dut2_node} | ${tg_node} +| | And Interfaces in 3-node path are up +| | And L2 setup xconnect on DUT +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg} +| | And VPP Set IF IPv6 Addr +| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_if1_ip} | ${ip_prefix} +| | And VPP Set IF IPv6 Addr +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_if2_ip} | ${ip_prefix} +| | And VPP Set IF IPv6 Addr +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_if1_ip} | ${ip_prefix} +| | And VPP Set IF IPv6 Addr +| | ... | ${dut2_node} | ${dut2_to_tg} | ${dut2_if2_ip} | ${ip_prefix} +| |Â And Add IP Neighbor +| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_if1_ip_GW} | ${tg_to_dut1_mac} +| |Â And Add IP Neighbor +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_if2_ip_GW} | ${tg_to_dut2_mac} +| | And Vpp Route Add | ${dut1_node} +| | ... | ${test_dst_ip} | ${ip_prefix} | ${dut1_if2_ip_GW} | ${dut1_to_dut2} +| | And Vpp All Ra Suppress Link Layer | ${nodes} +| | And Add fib table | ${dut1_node} +| | ... | ${cop_dut_ip} | ${ip_prefix} | ${fib_table_number} |Â drop +| | When COP Add whitelist Entry +| | ... | ${dut1_node} | ${dut1_to_tg} | ip6 | ${fib_table_number} +| | And COP interface enable or disable | ${dut1_node} | ${dut1_to_tg} | enable +| | Then Send packet from Port to Port should failed | ${tg_node} +| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac} +| | ... | ${dut1_to_tg_mac} | ${tg_to_dut2} | ${dut1_to_dut2_mac} +| | ... | ${tg_to_dut2_mac} diff --git a/tests/func/cop/cop_whitelist_blacklist_IPv6.robot b/tests/func/cop_base/eth2p-ethip6-ip6base-copwhlistbase-func.robot index 140c6b0673..f75f4d0dea 100644 --- a/tests/func/cop/cop_whitelist_blacklist_IPv6.robot +++ b/tests/func/cop_base/eth2p-ethip6-ip6base-copwhlistbase-func.robot @@ -24,7 +24,7 @@ | Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO | Test Setup | Func Test Setup | Test Teardown | Func Test Teardown -| Documentation | *COP Security IPv6 Blacklist and Whitelist Tests* +| Documentation | *COP Security IPv6 Whitelist Tests* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology | ... | with single links between nodes. @@ -99,41 +99,3 @@ | | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac} | | ... | ${dut1_to_tg_mac} | ${tg_to_dut2} | ${dut1_to_dut2_mac} | | ... | ${tg_to_dut2_mac} - -| TC02: DUT drops IPv6 pkts with COP blacklist set with IPv6 src-addr -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv6-ICMPv6. [Cfg] On DUT1 \ -| | ... | configure interface IPv6 addresses and routes in the main -| | ... | routing domain, add COP blacklist on interface to TG with IPv6 -| | ... | src-addr matching packets generated by TG; on DUT2 configure L2 -| | ... | xconnect. [Ver] Make TG send ICMPv6 Echo Req on its interface to -| | ... | DUT1; verify no ICMPv6 Echo Req pkts are received. [Ref] -| | Given Path for 3-node testing is set -| | ... | ${tg_node} | ${dut1_node} | ${dut2_node} | ${tg_node} -| | And Interfaces in 3-node path are up -| | And L2 setup xconnect on DUT -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg} -| | And VPP Set IF IPv6 Addr -| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_if1_ip} | ${ip_prefix} -| | And VPP Set IF IPv6 Addr -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_if2_ip} | ${ip_prefix} -| | And VPP Set IF IPv6 Addr -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_if1_ip} | ${ip_prefix} -| | And VPP Set IF IPv6 Addr -| | ... | ${dut2_node} | ${dut2_to_tg} | ${dut2_if2_ip} | ${ip_prefix} -| |Â And Add IP Neighbor -| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_if1_ip_GW} | ${tg_to_dut1_mac} -| |Â And Add IP Neighbor -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_if2_ip_GW} | ${tg_to_dut2_mac} -| | And Vpp Route Add | ${dut1_node} -| | ... | ${test_dst_ip} | ${ip_prefix} | ${dut1_if2_ip_GW} | ${dut1_to_dut2} -| | And Vpp All Ra Suppress Link Layer | ${nodes} -| | And Add fib table | ${dut1_node} -| | ... | ${cop_dut_ip} | ${ip_prefix} | ${fib_table_number} |Â drop -| | When COP Add whitelist Entry -| | ... | ${dut1_node} | ${dut1_to_tg} | ip6 | ${fib_table_number} -| | And COP interface enable or disable | ${dut1_node} | ${dut1_to_tg} | enable -| | Then Send packet from Port to Port should failed | ${tg_node} -| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac} -| | ... | ${dut1_to_tg_mac} | ${tg_to_dut2} | ${dut1_to_dut2_mac} -| | ... | ${tg_to_dut2_mac} diff --git a/tests/func/dhcp/dhcp_client.robot b/tests/func/dhcp/eth2p-ethip4-ip4base-ip4dhcpclient-func.robot index 6169b97fb7..5507c956d5 100644 --- a/tests/func/dhcp/dhcp_client.robot +++ b/tests/func/dhcp/eth2p-ethip4-ip4base-ip4dhcpclient-func.robot @@ -20,7 +20,7 @@ | Force Tags | HW_ENV | VM_ENV | 3_NODE_DOUBLE_LINK_TOPO | Test Setup | Func Test Setup | Test Teardown | Func Test Teardown -| Documentation | *DHCP Client related test cases* +| Documentation | *DHCPv4 Client related test cases* *** Variables *** | ${client_hostname}= | dhcp-client @@ -32,9 +32,9 @@ *** Test Cases *** | VPP sends a DHCP DISCOVER -| | [Documentation] | Configure DHCP client on interface to TG without hostname -| | ... | and check if DHCP DISCOVER message contains all required -| | ... | fields with expected values. +| | [Documentation] | Configure DHCPv4 client on interface to TG without +| | ... | hostname and check if DHCPv4 DISCOVER message contains all +| | ... | required fields with expected values. | | ... | | Given Path for 2-node testing is set | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} @@ -43,9 +43,9 @@ | | Then Check DHCP DISCOVER header | ${tg_node} | | ... | ${tg_to_dut_if1} | ${dut_to_tg_if1_mac} -| VPP sends a DHCP DISCOVER with hostname -| | [Documentation] | Configure DHCP client on interface to TG with hostname -| | ... | and check if DHCP DISCOVER message contains all required +| VPP sends a DHCPv4 DISCOVER with hostname +| | [Documentation] | Configure DHCPv4 client on interface to TG with hostname +| | ... | and check if DHCPv4 DISCOVER message contains all required | | ... | fields with expected values. | | ... | | Given Path for 2-node testing is set @@ -56,9 +56,9 @@ | | Then Check DHCP DISCOVER header | ${tg_node} | | ... | ${tg_to_dut_if1} | ${dut_to_tg_if1_mac} | ${client_hostname} -| VPP sends DHCP REQUEST after OFFER -| | [Documentation] | Configure DHCP client on interface to TG and check if -| | ... | DHCP REQUEST message contains all required fields. +| VPP sends DHCPv4 REQUEST after OFFER +| | [Documentation] | Configure DHCPv4 client on interface to TG and check if +| | ... | DHCPv4 REQUEST message contains all required fields. | | ... | | Given Path for 2-node testing is set | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} @@ -70,11 +70,11 @@ | | ... | ${tg_to_dut_if1_mac} | ${server_ip} | | ... | ${dut_to_tg_if1_mac} | ${client_ip} | ${client_mask} -| VPP doesn't send DHCP REQUEST after OFFER with wrong XID +| VPP doesn't send DHCPv4 REQUEST after OFFER with wrong XID | | [ Tags ] | EXPECTED_FAILING -| | [Documentation] | Configure DHCP client on interface to TG. If server sends -| | ... | DHCP OFFER with different XID as in DHCP DISCOVER, -| | ... | DHCP REQUEST message shouldn't be sent. +| | [Documentation] | Configure DHCPv4 client on interface to TG. If server +| | ... | sends DHCPv4 OFFER with different XID as in DHCPv4 +| | ... | DISCOVER, DHCPv4 REQUEST message shouldn't be sent. | | ... | | Given Path for 2-node testing is set | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} @@ -89,9 +89,9 @@ | | ... | offer_xid=${own_xid} | VPP honors DHCPv4 lease time -| | [Documentation] | Send IP configuration to the VPP client via DHCP. Address -| | ... | is checked with ICMP echo request and there should be no -| | ... | reply for echo request when lease has expired. +| | [Documentation] | Send IP configuration to the VPP client via DHCPv4. +| | ... | Address is checked with ICMP echo request and there should +| | ... | be no reply for echo request when lease has expired. | | ... | | Given Path for 2-node testing is set | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} diff --git a/tests/func/dhcp/dhcp_v4_proxy.robot b/tests/func/dhcp/eth2p-ethip4-ip4base-ip4dhcpproxy-func.robot index a9c4d23ea9..e503c7fe0f 100644 --- a/tests/func/dhcp/dhcp_v4_proxy.robot +++ b/tests/func/dhcp/eth2p-ethip4-ip4base-ip4dhcpproxy-func.robot @@ -20,15 +20,15 @@ | Force Tags | HW_ENV | VM_ENV | 3_NODE_DOUBLE_LINK_TOPO | Test Setup | Func Test Setup | Test Teardown | Func Test Teardown -| Documentation | *DHCP proxy test cases* +| Documentation | *DHCPv4 proxy test cases* | ... | ... | *[Top] Network Topologies:* TG = DUT | ... | with two links between the nodes. | ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP-BOOTP-DHCP -| ... | *[Cfg] DUT configuration:* DUT is configured with DHCP proxy. -| ... | *[Ver] TG verification:* Test DHCP packets are sent +| ... | *[Cfg] DUT configuration:* DUT is configured with DHCPv4 proxy. +| ... | *[Ver] TG verification:* Test DHCPv4 packets are sent | ... | on TG on first link to DUT and received on TG on second link. -| ... | On receive TG verifies if DHCP packets are valid. +| ... | On receive TG verifies if DHCPv4 packets are valid. *** Variables *** | ${dut_to_tg_if1_ip}= | 172.16.0.1 @@ -46,8 +46,8 @@ | | [Documentation] | | | ... | [Top] TG=DUT \ | | ... | [Enc] Eth-IPv4-UDP-BOOTP-DHCP -| | ... | [Cfg] On DUT setup DHCP proxy. -| | ... | [Ver] Make TG verify matching DHCP packets between client and DHCP +| | ... | [Cfg] On DUT setup DHCPv4 proxy. +| | ... | [Ver] Make TG verify matching DHCPv4 packets between client and DHCPv4 | | ... | server through DHCP proxy. | | ... | | Given Path for 2-node testing is set @@ -71,8 +71,8 @@ | | [Documentation] | | | ... | [Top] TG=DUT \ | | ... | [Enc] Eth-IPv4-UDP-BOOTP-DHCP -| | ... | [Cfg] On DUT setup DHCP proxy. -| | ... | [Ver] Make TG verify matching invalid DHCP packets are dropped. +| | ... | [Cfg] On DUT setup DHCPv4 proxy. +| | ... | [Ver] Make TG verify matching invalid DHCPv4 packets are dropped. | | ... | | Given Path for 2-node testing is set | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} diff --git a/tests/func/dhcp/dhcp_v6_proxy.robot b/tests/func/dhcp/eth2p-ethip6-ip6base-ip6dhcpproxy-func.robot index eeaf796a28..724150f929 100644 --- a/tests/func/dhcp/dhcp_v6_proxy.robot +++ b/tests/func/dhcp/eth2p-ethip6-ip6base-ip6dhcpproxy-func.robot @@ -24,10 +24,10 @@ | ... | ... | *[Top] Network Topologies:* TG = DUT | ... | with two links between the nodes. -| ... | *[Cfg] DUT configuration:* DUT is configured with DHCP proxy. -| ... | *[Ver] TG verification:*Test DHCP packets are sent +| ... | *[Cfg] DUT configuration:* DUT is configured with DHCPv6 proxy. +| ... | *[Ver] TG verification:* Test DHCPv6 packets are sent | ... | on TG on first link to DUT and received on TG on second link. -| ... | On receive TG verifies if DHCP packets are valid +| ... | On receive TG verifies if DHCPv6 packets are valid | ... | *[Ref] Applicable standard specifications:* RFC 3315 @@ -43,8 +43,8 @@ | | [Documentation] | | | ... | [Top] TG=DUT | | ... | [Cfg] On DUT setup DHCP proxy. -| | ... | [Ver] Make TG verify matching DHCPv6 packets between client and DHCP \ -| | ... | server through DHCP proxy. +| | ... | [Ver] Make TG verify matching DHCPv6 packets between client and \ +| | ... | DHCPv6 server through DHCPv6 proxy. | | ... | [Ref] RFC 3315 | | ... | | Given Path for 2-node testing is set diff --git a/tests/func/fds/provider_network.robot b/tests/func/fds/eth2p-dot1q-l2bdbasemaclrn-eth-4vhost-2vm-fds-provider-nets-func.robot index 612825d9a4..612825d9a4 100644 --- a/tests/func/fds/provider_network.robot +++ b/tests/func/fds/eth2p-dot1q-l2bdbasemaclrn-eth-4vhost-2vm-fds-provider-nets-func.robot diff --git a/tests/func/fds/tenant_network.robot b/tests/func/fds/eth2p-ethip4vxlan-l2bdbasemaclrn--eth-4vhost-2vm-fds-tenant-nets-func.robot index ba26c8bb55..ba26c8bb55 100644 --- a/tests/func/fds/tenant_network.robot +++ b/tests/func/fds/eth2p-ethip4vxlan-l2bdbasemaclrn--eth-4vhost-2vm-fds-tenant-nets-func.robot diff --git a/tests/func/gre/gre_encapsulation.robot b/tests/func/gre/eth2p-ethip4gre-ip4base-func.robot index 7087e31326..7087e31326 100644 --- a/tests/func/gre/gre_encapsulation.robot +++ b/tests/func/gre/eth2p-ethip4gre-ip4base-func.robot diff --git a/tests/func/iacl/l2_iacl_untagged.robot b/tests/func/iacl_base/eth2p-eth-l2xcbase-iaclbase-func.robot index 06ecc99176..1914130bac 100644 --- a/tests/func/iacl/l2_iacl_untagged.robot +++ b/tests/func/iacl_base/eth2p-eth-l2xcbase-iaclbase-func.robot @@ -21,7 +21,6 @@ | Library | resources.libraries.python.Classify.Classify | Library | resources.libraries.python.Trace | Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO -| ... | 3_NODE_DOUBLE_LINK_TOPO | Test Setup | Func Test Setup | Test Teardown | Func Test Teardown | Documentation | *Ingress ACL test cases* diff --git a/tests/func/iacl/ipv4_iacl_untagged.robot b/tests/func/iacl_base/eth2p-ethip4-ip4base-iaclbase-func.robot index ff55d94374..ff55d94374 100644 --- a/tests/func/iacl/ipv4_iacl_untagged.robot +++ b/tests/func/iacl_base/eth2p-ethip4-ip4base-iaclbase-func.robot diff --git a/tests/func/iacl/ipv6_iacl_untagged.robot b/tests/func/iacl_base/eth2p-ethip6-ip6base-iaclbase-func.robot index 47daac02a5..47daac02a5 100644 --- a/tests/func/iacl/ipv6_iacl_untagged.robot +++ b/tests/func/iacl_base/eth2p-ethip6-ip6base-iaclbase-func.robot diff --git a/tests/func/ipsec/ipsec_tunnel_mode_ipv4.robot b/tests/func/ipsec/eth2p-ethip4ipsectnl-ip4base-func.robot index e7c2967cf9..e7c2967cf9 100644 --- a/tests/func/ipsec/ipsec_tunnel_mode_ipv4.robot +++ b/tests/func/ipsec/eth2p-ethip4ipsectnl-ip4base-func.robot diff --git a/tests/func/ipsec/ipsec_transport_mode_ipv4.robot b/tests/func/ipsec/eth2p-ethip4ipsectpt-ip4base-func.robot index ca7f1b38fb..ca7f1b38fb 100644 --- a/tests/func/ipsec/ipsec_transport_mode_ipv4.robot +++ b/tests/func/ipsec/eth2p-ethip4ipsectpt-ip4base-func.robot diff --git a/tests/func/ipsec/ipsec_tunnel_mode_ipv6.robot b/tests/func/ipsec/eth2p-ethip6ipsectnl-ip6base-func.robot index 60b71fe9d5..60b71fe9d5 100644 --- a/tests/func/ipsec/ipsec_tunnel_mode_ipv6.robot +++ b/tests/func/ipsec/eth2p-ethip6ipsectnl-ip6base-func.robot diff --git a/tests/func/ipsec/ipsec_transport_mode_ipv6.robot b/tests/func/ipsec/eth2p-ethip6ipsectpt-ip6base-func.robot index 517c01b665..517c01b665 100644 --- a/tests/func/ipsec/ipsec_transport_mode_ipv6.robot +++ b/tests/func/ipsec/eth2p-ethip6ipsectpt-ip6base-func.robot diff --git a/tests/func/ipv4/ipv4_untagged.robot b/tests/func/ipv4_base/eth2p-ethip4-ip4base-func.robot index 020d1f143b..020d1f143b 100644 --- a/tests/func/ipv4/ipv4_untagged.robot +++ b/tests/func/ipv4_base/eth2p-ethip4-ip4base-func.robot diff --git a/tests/func/ipv4/ipv4_arp_untagged.robot b/tests/func/ipv4_base/eth2p-ethip4-ip4base-ip4arp-func.robot index 0950610559..0950610559 100644 --- a/tests/func/ipv4/ipv4_arp_untagged.robot +++ b/tests/func/ipv4_base/eth2p-ethip4-ip4base-ip4arp-func.robot diff --git a/tests/func/ipv4/ipv4_multipath_routing.robot b/tests/func/ipv4_base/eth2p-ethip4-ip4base-ip4ecmp-func.robot index f55ee64df9..f55ee64df9 100644 --- a/tests/func/ipv4/ipv4_multipath_routing.robot +++ b/tests/func/ipv4_base/eth2p-ethip4-ip4base-ip4ecmp-func.robot diff --git a/tests/func/ipv4/ipv4_proxy_arp_untagged.robot b/tests/func/ipv4_base/eth2p-ethip4-ip4base-ip4proxyarp-func.robot index 765a54b6d5..765a54b6d5 100644 --- a/tests/func/ipv4/ipv4_proxy_arp_untagged.robot +++ b/tests/func/ipv4_base/eth2p-ethip4-ip4base-ip4proxyarp-func.robot diff --git a/tests/func/ipv6/ipv6_untagged.robot b/tests/func/ipv6_base/eth2p-ethip6-ip6base-func.robot index 6048daad67..6048daad67 100644 --- a/tests/func/ipv6/ipv6_untagged.robot +++ b/tests/func/ipv6_base/eth2p-ethip6-ip6base-func.robot diff --git a/tests/func/ipv6/ipv6_multipath_routing.robot b/tests/func/ipv6_base/eth2p-ethip6-ip6base-ip6ecmp-func.robot index fddf3a98a8..fddf3a98a8 100644 --- a/tests/func/ipv6/ipv6_multipath_routing.robot +++ b/tests/func/ipv6_base/eth2p-ethip6-ip6base-ip6ecmp-func.robot diff --git a/tests/func/ipv6/ipv6_ra.robot b/tests/func/ipv6_base/eth2p-ethip6-ip6base-ip6ra-func.robot index e45ce730c9..e45ce730c9 100644 --- a/tests/func/ipv6/ipv6_ra.robot +++ b/tests/func/ipv6_base/eth2p-ethip6-ip6base-ip6ra-func.robot diff --git a/tests/func/l2bd_base/eth2p-eth-l2bdbasemaclrn-eth-2vhost-1vm-func.robot b/tests/func/l2bd_base/eth2p-eth-l2bdbasemaclrn-eth-2vhost-1vm-func.robot new file mode 100644 index 0000000000..b2279b90fc --- /dev/null +++ b/tests/func/l2bd_base/eth2p-eth-l2bdbasemaclrn-eth-2vhost-1vm-func.robot @@ -0,0 +1,110 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/default.robot +| Resource | resources/libraries/robot/bridge_domain.robot +| Resource | resources/libraries/robot/testing_path.robot +| Resource | resources/libraries/robot/qemu.robot +| Library | resources.libraries.python.Trace +| Force Tags | 3_NODE_DOUBLE_LINK_TOPO | HW_ENV | VM_ENV | VPP_VM_ENV +| Test Setup | Func Test Setup +| Test Teardown | Func Test Teardown +| Documentation | *L2 bridge-domain test cases* +| ... +| ... | *[Top] Network Topologies:* TG=DUT=VM 3-node topology with VM +| ... | and double parallel links. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for L2 switching of +| ... | IPv4; Eth-IPv6-ICMPv6 for L2 switching of IPv6 use. Both apply +| ... | to all links. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge-domains +| ... | (L2BD) switching combined with MAC learning enabled. +| ... | *[Ver] TG verification:* Test ICMPv4 (or ICMPv6) Echo Request packets +| ... | are sent in both directions by TG on links to DUT1 via VM; on +| ... | receive TG verifies packets for correctness and their IPv4 (IPv6) +| ... | src-addr, dst-addr and MAC addresses. +| ... | *[Ref] Applicable standard specifications:* + +*** Variables *** +| ${bd_id1}= | 1 +| ${bd_id2}= | 2 + +| ${sock1}= | /tmp/sock1 +| ${sock2}= | /tmp/sock2 + +*** Test Cases *** +| TC01: DUT with two L2BDs (MAC learn) switches ICMPv4 between TG and VM links +| | [Documentation] +| | ... | [Top] TG=DUT=VM. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT1 configure \ +| | ... | two L2BDs with MAC learning, each with vhost-user i/f to local +| | ... | VM and i/f to TG; configure VM to loop pkts back betwen its two +| | ... | virtio i/fs. [Ver] Make TG verify ICMPv4 Echo Req pkts are +| | ... | switched thru DUT1 and VM in both directions and are correct on +| | ... | receive. [Ref] +| | ... +| | [Teardown] | Run Keywords | Stop and Clear QEMU | ${dut_node} | ${vm_node} +| | ... | AND | Func Test Teardown +| | ... +| | Given Path for 2-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} +| | And Interfaces in 2-node path are up +| | When VPP Vhost interfaces for L2BD forwarding are setup | ${dut_node} +| | ... | ${sock1} +| | ... | ${sock2} +| | And Bridge domain on DUT node is created | ${dut_node} | ${bd_id1} +| | And Interface is added to bridge domain | ${dut_node} | ${dut_to_tg_if1} +| | ... | ${bd_id1} +| | And Interface is added to bridge domain | ${dut_node} | ${vhost_if1} +| | ... | ${bd_id1} +| | And Bridge domain on DUT node is created | ${dut_node} | ${bd_id2} +| | And Interface is added to bridge domain | ${dut_node} | ${dut_to_tg_if2} +| | ... | ${bd_id2} +| | And Interface is added to bridge domain | ${dut_node} | ${vhost_if2} +| | ... | ${bd_id2} +| | And VM for Vhost L2BD forwarding is setup | ${dut_node} | ${sock1} +| | ... | ${sock2} +| | Then Send and receive ICMPv4 bidirectionally | ${tg_node} | ${tg_to_dut_if1} +| | ... | ${tg_to_dut_if2} + +| TC02: DUT with two L2BDs (MAC learn) switches ICMPv6 between TG and VM links +| | [Documentation] +| | ... | [Top] TG=DUT=VM. [Enc] Eth-IPv6-ICMPv6. [Cfg] On DUT1 configure \ +| | ... | two L2BDs with MAC learning, each with vhost-user i/f to local +| | ... | VM and i/f to TG; configure VM to loop pkts back betwen its two +| | ... | virtio i/fs. [Ver] Make TG verify ICMPv6 Echo Req pkts are +| | ... | switched thru DUT1 and VM in both directions and are correct on +| | ... | receive. [Ref] +| | ... +| | [Teardown] | Run Keywords | Stop and Clear QEMU | ${dut_node} | ${vm_node} +| | ... | AND | Func Test Teardown +| | ... +| | Given Path for 2-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} +| | And Interfaces in 2-node path are up +| | When VPP Vhost interfaces for L2BD forwarding are setup | ${dut_node} +| | ... | ${sock1} +| | ... | ${sock2} +| | And Bridge domain on DUT node is created | ${dut_node} | ${bd_id1} +| | And Interface is added to bridge domain | ${dut_node} | ${dut_to_tg_if1} +| | ... | ${bd_id1} +| | And Interface is added to bridge domain | ${dut_node} | ${vhost_if1} +| | ... | ${bd_id1} +| | And Bridge domain on DUT node is created | ${dut_node} | ${bd_id2} +| | And Interface is added to bridge domain | ${dut_node} | ${dut_to_tg_if2} +| | ... | ${bd_id2} +| | And Interface is added to bridge domain | ${dut_node} | ${vhost_if2} +| | ... | ${bd_id2} +| | And VM for Vhost L2BD forwarding is setup | ${dut_node} | ${sock1} +| | ... | ${sock2} +| | Then Send and receive ICMPv6 bidirectionally | ${tg_node} | ${tg_to_dut_if1} +| | ... | ${tg_to_dut_if2} diff --git a/tests/func/l2bd_base/eth2p-eth-l2bdbasemaclrn-func.robot b/tests/func/l2bd_base/eth2p-eth-l2bdbasemaclrn-func.robot new file mode 100644 index 0000000000..a0336e5cc8 --- /dev/null +++ b/tests/func/l2bd_base/eth2p-eth-l2bdbasemaclrn-func.robot @@ -0,0 +1,90 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/default.robot +| Resource | resources/libraries/robot/bridge_domain.robot +| Resource | resources/libraries/robot/testing_path.robot +| Resource | resources/libraries/robot/qemu.robot +| Library | resources.libraries.python.Trace +| Force Tags | HW_ENV | VM_ENV +| Test Setup | Func Test Setup +| Test Teardown | Func Test Teardown +| Documentation | *L2 bridge-domain test cases* +| ... +| ... | *[Top] Network Topologies:* TG=DUT1 2-node topology with two links +| ... | between nodes; TG-DUT1-DUT2-TG 3-node circular topology with +| ... | single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for L2 switching of +| ... | IPv4; Eth-IPv6-ICMPv6 for L2 switching of IPv6 use. Both apply +| ... | to all links. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 +| ... | bridge-domain (L2BD) switching combined with MAC learning enabled. +| ... | *[Ver] TG verification:* Test ICMPv4 (or ICMPv6) Echo Request packets +| ... | are sent in both directions by TG on links to DUT1 and DUT2; on +| ... | receive TG verifies packets for correctness and their IPv4 (IPv6) +| ... | src-addr, dst-addr and MAC addresses. +| ... | *[Ref] Applicable standard specifications:* + +*** Variables *** +| ${bd_id1}= | 1 +| ${bd_id2}= | 2 + +*** Test Cases *** +| TC01: DUT reports active interfaces +| | [Documentation] +| | ... | [Top] TG=DUT1; TG-DUT1-DUT2-TG. [Enc] None. [Cfg] Discovered \ +| | ... | active interfaces. [Ver] Report active interfaces on DUT. [Ref] +| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO | 3_NODE_SINGLE_LINK_TOPO +| | VPP reports interfaces on | ${nodes['DUT1']} + +| TC02: DUT with L2BD (MAC learning) switch ICMPv4 between two TG links +| | [Documentation] +| | ... | [Top] TG=DUT1. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT1 configure \ +| | ... | two i/fs into L2BD with MAC learning. [Ver] Make TG verify +| | ... | ICMPv4 Echo Req pkts are switched thru DUT1 in both directions +| | ... | and are correct on receive. [Ref] +| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO +| | Given Path for 2-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} +| | And Interfaces in 2-node path are up +| | When Bridge domain on DUT node is created | ${dut_node} | ${bd_id1} +| | And Interface is added to bridge domain | ${dut_node} | ${dut_to_tg_if1} +| | ... | ${bd_id1} +| | And Interface is added to bridge domain | ${dut_node} | ${dut_to_tg_if2} +| | ... | ${bd_id1} +| | Then Send and receive ICMPv4 bidirectionally | ${tg_node} | ${tg_to_dut_if1} +| | ... | ${tg_to_dut_if2} + +| TC03: DUT1 and DUT2 with L2BD (MAC learning) switch between two TG links +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT1 and DUT2 \ +| | ... | configure two i/fs into L2BD with MAC learning. [Ver] Make TG +| | ... | verify ICMPv4 Echo Req pkts are switched thru DUT1 and DUT2 in +| | ... | both directions and are correct on receive. [Ref] +| | [Tags] | 3_NODE_SINGLE_LINK_TOPO +| | Given Path for 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in 3-node path are up +| | When Bridge domain on DUT node is created | ${dut1_node} | ${bd_id1} +| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_tg} +| | ... | ${bd_id1} +| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_dut2} +| | ... | ${bd_id1} +| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id2} +| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg} +| | ... | ${bd_id2} +| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_dut1} +| | ... | ${bd_id2} +| | Then Send and receive ICMPv4 bidirectionally | ${tg_node} | ${tg_to_dut1} +| | ... | ${tg_to_dut2} diff --git a/tests/func/l2bd_base/eth2p-eth-l2bdbasemacstc-eth-2vhost-1vm-func.robot b/tests/func/l2bd_base/eth2p-eth-l2bdbasemacstc-eth-2vhost-1vm-func.robot new file mode 100644 index 0000000000..ad5258bb9a --- /dev/null +++ b/tests/func/l2bd_base/eth2p-eth-l2bdbasemacstc-eth-2vhost-1vm-func.robot @@ -0,0 +1,154 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/default.robot +| Resource | resources/libraries/robot/bridge_domain.robot +| Resource | resources/libraries/robot/testing_path.robot +| Resource | resources/libraries/robot/qemu.robot +| Library | resources.libraries.python.Trace +| Force Tags | 3_NODE_DOUBLE_LINK_TOPO | HW_ENV | VM_ENV | VPP_VM_ENV +| Test Setup | Func Test Setup +| Test Teardown | Func Test Teardown +| Documentation | *L2 bridge-domain test cases* +| ... +| ... | *[Top] Network Topologies:* TG=DUT=VM 3-node topology with VM +| ... | and double parallel links. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for L2 switching of +| ... | IPv4; Eth-IPv6-ICMPv6 for L2 switching of IPv6 use. Both apply +| ... | to all links. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge-domains +| ... | (L2BD) switching combined with static MACs. +| ... | *[Ver] TG verification:* Test ICMPv4 (or ICMPv6) Echo Request packets +| ... | are sent in both directions by TG on links to DUT1 via VM; on +| ... | receive TG verifies packets for correctness and their IPv4 (IPv6) +| ... | src-addr, dst-addr and MAC addresses. +| ... | *[Ref] Applicable standard specifications:* + +*** Variables *** +| ${bd_id1}= | 1 +| ${bd_id2}= | 2 + +| ${sock1}= | /tmp/sock1 +| ${sock2}= | /tmp/sock2 + +*** Test Cases *** +| TC01: DUT with two L2BDs (static MACs) switches ICMPv4 between TG and VM links +| | [Documentation] +| | ... | [Top] TG=DUT=VM. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT1 configure \ +| | ... | two L2BDs with static MACs, each with vhost-user i/f to local VM +| | ... | and i/f to TG; configure VM to loop pkts back betwen its two +| | ... | virtio i/fs. [Ver] Make TG verify ICMPv4 Echo Req pkts are +| | ... | switched thru DUT1 and VM in both directions and are correct on +| | ... | receive. [Ref] +| | ... +| | [Teardown] | Run Keywords | Stop and Clear QEMU | ${dut_node} | ${vm_node} +| | ... | AND | Func Test Teardown +| | ... +| | Given Path for 2-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} +| | And Interfaces in 2-node path are up +| | When VPP Vhost interfaces for L2BD forwarding are setup | ${dut_node} +| | ... | ${sock1} +| | ... | ${sock2} +| | And Bridge domain on DUT node is created | ${dut_node} | ${bd_id1} +| | ... | learn=${FALSE} +| | And Interface is added to bridge domain | ${dut_node} | ${dut_to_tg_if1} +| | ... | ${bd_id1} +| | And Interface is added to bridge domain | ${dut_node} | ${vhost_if1} +| | ... | ${bd_id1} +| | And Destination port is added to L2FIB on DUT node | ${tg_node} +| | ... | ${tg_to_dut_if1} +| | ... | ${dut_node} +| | ... | ${dut_to_tg_if1} +| | ... | ${bd_id1} +| | And Destination port is added to L2FIB on DUT node | ${tg_node} +| | ... | ${tg_to_dut_if2} +| | ... | ${dut_node} +| | ... | ${vhost_if1} +| | ... | ${bd_id1} +| | And Bridge domain on DUT node is created | ${dut_node} | ${bd_id2} +| | ... | learn=${FALSE} +| | And Interface is added to bridge domain | ${dut_node} | ${dut_to_tg_if2} +| | ... | ${bd_id2} +| | And Interface is added to bridge domain | ${dut_node} | ${vhost_if2} +| | ... | ${bd_id2} +| | And Destination port is added to L2FIB on DUT node | ${tg_node} +| | ... | ${tg_to_dut_if2} +| | ... | ${dut_node} +| | ... | ${dut_to_tg_if2} +| | ... | ${bd_id2} +| | And Destination port is added to L2FIB on DUT node | ${tg_node} +| | ... | ${tg_to_dut_if1} +| | ... | ${dut_node} +| | ... | ${vhost_if2} +| | ... | ${bd_id2} +| | And VM for Vhost L2BD forwarding is setup | ${dut_node} | ${sock1} +| | ... | ${sock2} +| | Then Send and receive ICMPv4 bidirectionally | ${tg_node} | ${tg_to_dut_if1} +| | ... | ${tg_to_dut_if2} + +| TC02: DUT with two L2BDs (static MACs) switches ICMPv6 between TG and VM links +| | [Documentation] +| | ... | [Top] TG=DUT=VM. [Enc] Eth-IPv6-ICMPv6. [Cfg] On DUT1 configure \ +| | ... | two L2BDs with static MACs, each with vhost-user i/f to local VM +| | ... | and i/f to TG; configure VM to loop pkts back betwen its two +| | ... | virtio i/fs. [Ver] Make TG verify ICMPv6 Echo Req pkts are +| | ... | switched thru DUT1 and VM in both directions and are correct on +| | ... | receive. [Ref] +| | ... +| | [Teardown] | Run Keywords | Stop and Clear QEMU | ${dut_node} | ${vm_node} +| | ... | AND | Func Test Teardown +| | ... +| | Given Path for 2-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} +| | And Interfaces in 2-node path are up +| | When VPP Vhost interfaces for L2BD forwarding are setup | ${dut_node} +| | ... | ${sock1} +| | ... | ${sock2} +| | And Bridge domain on DUT node is created | ${dut_node} | ${bd_id1} +| | ... | learn=${FALSE} +| | And Interface is added to bridge domain | ${dut_node} | ${dut_to_tg_if1} +| | ... | ${bd_id1} +| | And Interface is added to bridge domain | ${dut_node} | ${vhost_if1} +| | ... | ${bd_id1} +| | And Destination port is added to L2FIB on DUT node | ${tg_node} +| | ... | ${tg_to_dut_if1} +| | ... | ${dut_node} +| | ... | ${dut_to_tg_if1} +| | ... | ${bd_id1} +| | And Destination port is added to L2FIB on DUT node | ${tg_node} +| | ... | ${tg_to_dut_if2} +| | ... | ${dut_node} +| | ... | ${vhost_if1} +| | ... | ${bd_id1} +| | And Bridge domain on DUT node is created | ${dut_node} | ${bd_id2} +| | ... | learn=${FALSE} +| | And Interface is added to bridge domain | ${dut_node} | ${dut_to_tg_if2} +| | ... | ${bd_id2} +| | And Interface is added to bridge domain | ${dut_node} | ${vhost_if2} +| | ... | ${bd_id2} +| | And Destination port is added to L2FIB on DUT node | ${tg_node} +| | ... | ${tg_to_dut_if2} +| | ... | ${dut_node} +| | ... | ${dut_to_tg_if2} +| | ... | ${bd_id2} +| | And Destination port is added to L2FIB on DUT node | ${tg_node} +| | ... | ${tg_to_dut_if1} +| | ... | ${dut_node} +| | ... | ${vhost_if2} +| | ... | ${bd_id2} +| | And VM for Vhost L2BD forwarding is setup | ${dut_node} | ${sock1} +| | ... | ${sock2} +| | Then Send and receive ICMPv6 bidirectionally | ${tg_node} | ${tg_to_dut_if1} +| | ... | ${tg_to_dut_if2} diff --git a/tests/func/l2bd_base/eth2p-eth-l2bdbasemacstc-func.robot b/tests/func/l2bd_base/eth2p-eth-l2bdbasemacstc-func.robot new file mode 100644 index 0000000000..271852e7e6 --- /dev/null +++ b/tests/func/l2bd_base/eth2p-eth-l2bdbasemacstc-func.robot @@ -0,0 +1,86 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/default.robot +| Resource | resources/libraries/robot/bridge_domain.robot +| Resource | resources/libraries/robot/testing_path.robot +| Resource | resources/libraries/robot/qemu.robot +| Library | resources.libraries.python.Trace +| Force Tags | HW_ENV | VM_ENV +| Test Setup | Func Test Setup +| Test Teardown | Func Test Teardown +| Documentation | *L2 bridge-domain test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for L2 switching of +| ... | IPv4; Eth-IPv6-ICMPv6 for L2 switching of IPv6 use. Both apply +| ... | to all links. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 +| ... | bridge-domain (L2BD) switching combined with static MACs. +| ... | *[Ver] TG verification:* Test ICMPv4 (or ICMPv6) Echo Request packets +| ... | are sent in both directions by TG on links to DUT1 and DUT2; on +| ... | receive TG verifies packets for correctness and their IPv4 (IPv6) +| ... | src-addr, dst-addr and MAC addresses. +| ... | *[Ref] Applicable standard specifications:* + +*** Variables *** +| ${bd_id1}= | 1 +| ${bd_id2}= | 2 + +*** Test Cases *** +| TC01: DUT1 and DUT2 with L2BD (static MACs) switch between two TG links +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT1 and \ +| | ... | DUT2 configure two i/fs into L2BD with static MACs. [Ver] Make +| | ... | TG verify ICMPv4 Echo Req pkts are switched thru DUT1 and DUT2 +| | ... | in both directions and are correct on receive. [Ref] +| | [Tags] | 3_NODE_SINGLE_LINK_TOPO +| | Given Path for 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in 3-node path are up +| | When Bridge domain on DUT node is created | ${dut1_node} | ${bd_id1} +| | ... | learn=${FALSE} +| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_tg} +| | ... | ${bd_id1} +| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_dut2} +| | ... | ${bd_id1} +| | And Destination port is added to L2FIB on DUT node | ${tg_node} +| | ... | ${tg_to_dut1} +| | ... | ${dut1_node} +| | ... | ${dut1_to_tg} +| | ... | ${bd_id1} +| | And Destination port is added to L2FIB on DUT node | ${tg_node} +| | ... | ${tg_to_dut2} +| | ... | ${dut1_node} +| | ... | ${dut1_to_dut2} +| | ... | ${bd_id1} +| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id2} +| | ... | learn=${FALSE} +| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg} +| | ... | ${bd_id2} +| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_dut1} +| | ... | ${bd_id2} +| | And Destination port is added to L2FIB on DUT node | ${tg_node} +| | ... | ${tg_to_dut1} +| | ... | ${dut2_node} +| | ... | ${dut2_to_dut1} +| | ... | ${bd_id2} +| | And Destination port is added to L2FIB on DUT node | ${tg_node} +| | ... | ${tg_to_dut2} +| | ... | ${dut2_node} +| | ... | ${dut2_to_tg} +| | ... | ${bd_id2} +| | Then Send and receive ICMPv4 bidirectionally | ${tg_node} | ${tg_to_dut1} +| | ... | ${tg_to_dut2} diff --git a/tests/func/l2bd_base/eth4p-eth-l2bdbasemaclrn-l2shg-func.robot b/tests/func/l2bd_base/eth4p-eth-l2bdbasemaclrn-l2shg-func.robot new file mode 100644 index 0000000000..295a03eadc --- /dev/null +++ b/tests/func/l2bd_base/eth4p-eth-l2bdbasemaclrn-l2shg-func.robot @@ -0,0 +1,93 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/default.robot +| Resource | resources/libraries/robot/bridge_domain.robot +| Resource | resources/libraries/robot/testing_path.robot +| Resource | resources/libraries/robot/qemu.robot +| Library | resources.libraries.python.Trace +| Force Tags | HW_ENV | VM_ENV +| Test Setup | Func Test Setup +| Test Teardown | Func Test Teardown +| Documentation | *L2 bridge-domain test cases* +| ... +| ... | *[Top] Network Topologies:* TG=DUT1=DUT2=TG 3-node circular topology +| ... | with double parallel links. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for L2 switching of +| ... | IPv4; Eth-IPv6-ICMPv6 for L2 switching of IPv6 use. Both apply +| ... | to all links. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 +| ... | bridge-domain (L2BD) switching combined with MAC learning enabled +| ... | and Split Horizon Groups (SHG). +| ... | *[Ver] TG verification:* Test ICMPv4 (or ICMPv6) Echo Request packets +| ... | are sent in both directions by TG on links to DUT1 and DUT2; on +| ... | receive TG verifies packets for correctness and their IPv4 (IPv6) +| ... | src-addr, dst-addr and MAC addresses. +| ... | *[Ref] Applicable standard specifications:* + +*** Variables *** +| ${bd_id1}= | 1 +| ${bd_id2}= | 2 + +| ${shg1}= | 3 +| ${shg2}= | 4 + +*** Test Cases *** +| TC01: DUT1 and DUT2 with L2BD (MAC learn) and SHG switch between four TG links +| | [Documentation] +| | ... | [Top] TG=DUT1=DUT2=TG. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT1 and \ +| | ... | DUT2 configure four i/fs into L2BD with MAC learning and the +| | ... | same SHG on i/fs towards TG. [Ver] Make TG verify ICMPv4 Echo +| | ... | Req pkts are switched thru DUT1 and DUT2 in both directions and +| | ... | are correct on receive; verify no pkts are switched thru SHG +| | ... | isolated interfaces. [Ref] +| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO +| | Given Path for 3-node BD-SHG testing is set | ${nodes['TG']} +| | ... | ${nodes['DUT1']} +| | ... | ${nodes['DUT2']} +| | And Interfaces in 3-node BD-SHG testing are up +| | When Bridge domain on DUT node is created | ${dut1_node} | ${bd_id1} +| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_tg_if1} +| | ... | ${bd_id1} | ${shg1} +| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_tg_if2} +| | ... | ${bd_id1} | ${shg1} +| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_dut2} +| | ... | ${bd_id1} +| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id2} +| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg_if1} +| | ... | ${bd_id2} | ${shg2} +| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg_if2} +| | ... | ${bd_id2} | ${shg2} +| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_dut1} +| | ... | ${bd_id2} +| | Then Send and receive ICMPv4 bidirectionally | ${tg_node} +| | ... | ${tg_to_dut1_if1} +| | ... | ${tg_to_dut2_if1} +| | And Send and receive ICMPv4 bidirectionally | ${tg_node} +| | ... | ${tg_to_dut1_if1} +| | ... | ${tg_to_dut2_if2} +| | And Send and receive ICMPv4 bidirectionally | ${tg_node} +| | ... | ${tg_to_dut1_if2} +| | ... | ${tg_to_dut2_if1} +| | And Send and receive ICMPv4 bidirectionally | ${tg_node} +| | ... | ${tg_to_dut1_if2} +| | ... | ${tg_to_dut2_if2} +| | And Run Keyword And Expect Error | ICMP echo Rx timeout +| | ... | Send and receive ICMPv4 bidirectionally +| | | ... | ${tg_node} | ${tg_to_dut1_if1} +| | | ... | ${tg_to_dut1_if2} +| | And Run Keyword And Expect Error | ICMP echo Rx timeout +| | ... | Send and receive ICMPv4 bidirectionally +| | | ... | ${tg_node} | ${tg_to_dut2_if1} +| | | ... | ${tg_to_dut2_if2} diff --git a/tests/func/l2_xconnect/l2_xconnect_untagged.robot b/tests/func/l2xc_base/eth2p-eth-l2xcbase-eth-2vhost-1vm-func.robot index 2554007cef..583a5ba052 100644 --- a/tests/func/l2_xconnect/l2_xconnect_untagged.robot +++ b/tests/func/l2xc_base/eth2p-eth-l2xcbase-eth-2vhost-1vm-func.robot @@ -21,21 +21,19 @@ | Resource | resources/libraries/robot/qemu.robot | Library | resources.libraries.python.Trace | Library | resources.libraries.python.NodePath -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | HW_ENV | VM_ENV +| Force Tags | 3_NODE_DOUBLE_LINK_TOPO | HW_ENV | VM_ENV | VPP_VM_ENV | Test Setup | Func Test Setup | Test Teardown | Func Test Teardown | Documentation | *L2 cross-connect test cases* | ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology with -| ... | single links between nodes; TG=DUT1=DUT2=TG 3-node circular topology -| ... | with double parallel links and TG=DUT=VM 3-node topology with VM and +| ... | *[Top] Network Topologies:* TG=DUT=VM 3-node topology with VM and | ... | double parallel links. | ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for L2 switching of IPv4; | ... | Eth-IPv6-ICMPv6 for L2 switching of IPv6 use. Both apply to all links. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 -| ... | cross-connect (L2XC) switching. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 cross-connect +| ... | (L2XC) switching. | ... | *[Ver] TG verification:* Test ICMPv4 (or ICMPv6) Echo Request packets are -| ... | sent in both directions by TG on links to DUT1 and DUT2; on receive TG +| ... | sent in both directions by TG on links to DUT1 via VM; on receive TG | ... | verifies packets for correctness and their IPv4 (IPv6) src-addr, | ... | dst-addr and MAC addresses. | ... | *[Ref] Applicable standard specifications:* @@ -45,45 +43,7 @@ | ${sock2}= | /tmp/sock2 *** Test Cases *** -| TC01: DUT1 and DUT2 with L2XC switch ICMPv4 between two TG links -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT1 and \ -| | ... | DUT2 configure L2 cross-connect (L2XC), each with one interface -| | ... | to TG and one Ethernet interface towards the other DUT. [Ver] -| | ... | Make TG send ICMPv4 Echo Req in both directions between two of -| | ... | its interfaces to be switched by DUT1 and DUT2; verify all -| | ... | packets are received. [Ref] -| | Given Path for 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in 3-node path are up -| | And L2 setup xconnect on DUT -| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_dut2} -| | And L2 setup xconnect on DUT -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg} -| | When All Vpp Interfaces Ready Wait | ${nodes} -| | Then Send and receive ICMPv4 bidirectionally -| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} - -| TC02: DUT1 and DUT2 with L2XC switch ICMPv6 between two TG links -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv6-ICMPv6. [Cfg] On DUT1 and \ -| | ... | DUT2 configure L2 cross-connect (L2XC), each with one interface -| | ... | to TG and one Ethernet interface towards the other DUT. [Ver] -| | ... | Make TG send ICMPv6 Echo Req in both directions between two of -| | ... | its interfaces to be switched by DUT1 and DUT2; verify all -| | ... | packets are received. [Ref] -| | Given Path for 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in 3-node path are up -| | And L2 setup xconnect on DUT -| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_dut2} -| | And L2 setup xconnect on DUT -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg} -| | When All Vpp Interfaces Ready Wait | ${nodes} -| | Then Send and receive ICMPv6 bidirectionally -| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} - -| TC03: DUT with two L2XCs switches ICMPv4 between TG and local VM links +| TC01: DUT with two L2XCs switches ICMPv4 between TG and local VM links | | [Documentation] | | ... | [Top] TG=DUT=VM. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT configure \ | | ... | two L2 cross-connects (L2XC), each with one untagged interface @@ -91,7 +51,10 @@ | | ... | TG send ICMPv4 Echo Reqs in both directions between two of its | | ... | i/fs to be switched by DUT to and from VM; verify all packets | | ... | are received. [Ref] -| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO | VPP_VM_ENV +| | ... +| | [Teardown] | Run Keywords | Stop and Clear QEMU | ${dut_node} | ${vm_node} +| | ... | AND | Func Test Teardown +| | ... | | Given Path for 2-node testing is set | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} | | And Interfaces in 2-node path are up @@ -104,12 +67,8 @@ | | ... | ${sock2} | | Then Send and receive ICMPv4 bidirectionally | ${tg_node} | ${tg_to_dut_if1} | | ... | ${tg_to_dut_if2} -| | [Teardown] | Run Keywords | Show Packet Trace on All DUTs | ${nodes} -| | ... | AND | Stop and Clear QEMU | ${dut_node} | ${vm_node} -| | ... | AND | Show vpp trace dump on all DUTs -| | ... | AND | Check VPP PID in Teardown -| TC04: DUT with two L2XCs switches ICMPv6 between TG and local VM links +| TC02: DUT with two L2XCs switches ICMPv6 between TG and local VM links | | [Documentation] | | ... | [Top] TG=DUT=VM. [Enc] Eth-IPv6-ICMPv6. [Cfg] On DUT configure \ | | ... | two L2 cross-connects (L2XC), each with one untagged i/f to TG @@ -117,7 +76,10 @@ | | ... | ICMPv6 Echo Reqs in both directions between two of its i/fs to | | ... | be switched by DUT to and from VM; verify all packets are | | ... | received. [Ref] -| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO | VPP_VM_ENV +| | ... +| | [Teardown] | Run Keywords | Stop and Clear QEMU | ${dut_node} | ${vm_node} +| | ... | AND | Func Test Teardown +| | ... | | Given Path for 2-node testing is set | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} | | And Interfaces in 2-node path are up @@ -130,8 +92,4 @@ | | ... | ${sock2} | | Then Send and receive ICMPv6 bidirectionally | ${tg_node} | ${tg_to_dut_if1} | | ... | ${tg_to_dut_if2} -| | [Teardown] | Run Keywords | Show Packet Trace on All DUTs | ${nodes} -| | ... | AND | Stop and Clear QEMU | ${dut_node} | ${vm_node} -| | ... | AND | Show vpp trace dump on all DUTs -| | ... | AND | Check VPP PID in Teardown diff --git a/tests/func/l2xc_base/eth2p-eth-l2xcbase-func.robot b/tests/func/l2xc_base/eth2p-eth-l2xcbase-func.robot new file mode 100644 index 0000000000..aa25225f44 --- /dev/null +++ b/tests/func/l2xc_base/eth2p-eth-l2xcbase-func.robot @@ -0,0 +1,78 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/default.robot +| Resource | resources/libraries/robot/l2_xconnect.robot +| Resource | resources/libraries/robot/l2_traffic.robot +| Resource | resources/libraries/robot/testing_path.robot +| Resource | resources/libraries/robot/interfaces.robot +| Resource | resources/libraries/robot/bridge_domain.robot +| Resource | resources/libraries/robot/qemu.robot +| Library | resources.libraries.python.Trace +| Library | resources.libraries.python.NodePath +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | HW_ENV | VM_ENV +| Test Setup | Func Test Setup +| Test Teardown | Func Test Teardown +| Documentation | *L2 cross-connect test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for L2 switching of IPv4; +| ... | Eth-IPv6-ICMPv6 for L2 switching of IPv6 use. Both apply to all links. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 +| ... | cross-connect (L2XC) switching. +| ... | *[Ver] TG verification:* Test ICMPv4 (or ICMPv6) Echo Request packets are +| ... | sent in both directions by TG on links to DUT1 and DUT2; on receive TG +| ... | verifies packets for correctness and their IPv4 (IPv6) src-addr, +| ... | dst-addr and MAC addresses. +| ... | *[Ref] Applicable standard specifications:* + +*** Test Cases *** +| TC01: DUT1 and DUT2 with L2XC switch ICMPv4 between two TG links +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT1 and \ +| | ... | DUT2 configure L2 cross-connect (L2XC), each with one interface +| | ... | to TG and one Ethernet interface towards the other DUT. [Ver] +| | ... | Make TG send ICMPv4 Echo Req in both directions between two of +| | ... | its interfaces to be switched by DUT1 and DUT2; verify all +| | ... | packets are received. [Ref] +| | Given Path for 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in 3-node path are up +| | And L2 setup xconnect on DUT +| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_dut2} +| | And L2 setup xconnect on DUT +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg} +| | When All Vpp Interfaces Ready Wait | ${nodes} +| | Then Send and receive ICMPv4 bidirectionally +| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} + +| TC02: DUT1 and DUT2 with L2XC switch ICMPv6 between two TG links +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv6-ICMPv6. [Cfg] On DUT1 and \ +| | ... | DUT2 configure L2 cross-connect (L2XC), each with one interface +| | ... | to TG and one Ethernet interface towards the other DUT. [Ver] +| | ... | Make TG send ICMPv6 Echo Req in both directions between two of +| | ... | its interfaces to be switched by DUT1 and DUT2; verify all +| | ... | packets are received. [Ref] +| | Given Path for 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in 3-node path are up +| | And L2 setup xconnect on DUT +| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_dut2} +| | And L2 setup xconnect on DUT +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg} +| | When All Vpp Interfaces Ready Wait | ${nodes} +| | Then Send and receive ICMPv6 bidirectionally +| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} diff --git a/tests/func/lisp/api.robot b/tests/func/lisp/api-crud-lisp-func.robot index 013eb7258c..013eb7258c 100644 --- a/tests/func/lisp/api.robot +++ b/tests/func/lisp/api-crud-lisp-func.robot diff --git a/tests/func/lisp/eth2p-ethip4ipsectptlispgpe-ip4base-eth-2vhost-1vm-func.robot b/tests/func/lisp/eth2p-ethip4ipsectptlispgpe-ip4base-eth-2vhost-1vm-func.robot new file mode 100644 index 0000000000..32477c02e0 --- /dev/null +++ b/tests/func/lisp/eth2p-ethip4ipsectptlispgpe-ip4base-eth-2vhost-1vm-func.robot @@ -0,0 +1,226 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Library | resources.libraries.python.topology.Topology +| Library | resources.libraries.python.NodePath +| Library | resources.libraries.python.Trace +| Library | resources.libraries.python.LispUtil +| Library | resources.libraries.python.VhostUser +| Library | resources.libraries.python.QemuUtils +| Library | resources.libraries.python.VPPUtil +| Library | resources.libraries.python.IPsecUtil +| Resource | resources/libraries/robot/traffic.robot +| Resource | resources/libraries/robot/default.robot +| Resource | resources/libraries/robot/interfaces.robot +| Resource | resources/libraries/robot/testing_path.robot +| Resource | resources/libraries/robot/vrf.robot +| Resource | resources/libraries/robot/ipsec.robot +| Resource | resources/libraries/robot/qemu.robot +| Resource | resources/libraries/robot/lisp/lispgpe.robot +| Resource | resources/libraries/robot/bridge_domain.robot +| Resource | resources/libraries/robot/lisp/l2lisp.robot +# Import configuration and test data: +| Variables | resources/test_data/lisp/ipv4_ipsec_lispgpe_ipv4/ipv4_ipsec_lispgpe_ipv4.py +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | LISP +| ... +| Test Setup | Func Test Setup +| Test Teardown | Run Keywords | Show Packet Trace on All DUTs | ${nodes} +| ... | AND | Show vpp trace dump on all DUTs +| ... | AND | Show Vpp Settings | ${nodes['DUT1']} +| ... | AND | Show Vpp Settings | ${nodes['DUT2']} +| ... | AND | Check VPP PID in Teardown +| ... +| Documentation | *IPv4-ip4-ipsec-lispgpe-ip4 - main fib, vrf (gpe_vni-to-vrf)* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* ICMPv4-IPv4-IPSec-LISPGPE-IPv4-ICMPv4. +| ... | *[Cfg] DUT configuration:* Each DUT is configured with LISP and IPsec.\ +| ... | IPsec is in transport mode. Tests cases are for IPsec configured both\ +| ... | on RLOC interface or lisp_gpe0 interface. +| ... | *[Ver] TG verification:* Packet is send from TG(if1) across the DUT1\ +| ... | via VM to DUT2 where it is forwarded to TG(if2). +| ... | *[Ref] Applicable standard specifications:* RFC6830, RFC4303. + +*** Variables *** +| ${dut2_spi}= | ${1000} +| ${dut1_spi}= | ${1001} + +| ${ESP_PROTO}= | ${50} + +| ${sock1}= | /tmp/sock1 +| ${sock2}= | /tmp/sock2 + +| ${bid}= | 10 + +*** Test Cases *** +| TC01: DUT1 and DUT2 route IPv4 over Vhost to LISP GPE tunnel using IPsec (transport) on RLOC Int. +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. +| | ... | [Enc] Eth-IPv4-IPSec-LISPGPE-IPv4-ICMP on DUT1-DUT2, Eth-IPv4-ICMP\ +| | ... | on TG-DUTn. +| | ... | [Cfg] Configure IPv4 LISP static adjacencies on DUT1 and DUT2 with\ +| | ... | IPsec in between DUTS. Create Qemu vm on DUT1 and configure bridge\ +| | ... | between two vhosts. +| | ... | [Ver] Case: ip4-ipsec-lispgpe-ip4 - main fib, virt2lisp\ +| | ... | Make TG send ICMPv4 Echo Req between its interfaces across\ +| | ... | both DUTs and LISP GPE tunnel between them; verify IPv4 headers on\ +| | ... | received packets are correct. +| | ... | [Ref] RFC6830, RFC4303. +| | [Teardown] | Run Keywords | Show Packet Trace on All DUTs | ${nodes} +| | ... | AND | Show vpp trace dump on all DUTs +| | ... | AND | Stop and Clear QEMU | ${dut1_node} | ${vm_node} +| | ... | AND | Show VPP Settings | ${dut1_node} +| | ... | AND | Show VPP Settings | ${dut2_node} +| | ... | AND | Check VPP PID in Teardown +| | ... +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Setup 3-node Topology +| | And Add IP Neighbors +| | And Setup Qemu DUT1 +| | And Set up LISP GPE topology +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE} +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid} +| | ... | ${dut1_to_dut2_ip4_static_adjacency} +| | ... | ${dut2_to_dut1_ip4_static_adjacency} +| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg} +| | When VPP Setup IPsec Manual Keyed Connection +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${encr_alg} | ${encr_key} +| | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi} +| | ... | ${dut1_to_dut2_ip4} | ${dut2_to_dut1_ip4} +| | And VPP Setup IPsec Manual Keyed Connection +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${encr_alg} | ${encr_key} +| | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi} +| | ... | ${dut2_to_dut1_ip4} | ${dut1_to_dut2_ip4} +| | Then Send Packet And Check Headers +| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4} +| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dst_vhost_mac} +| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} +| | And Send Packet And Check Headers +| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4} +| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} +| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} + +| TC02: DUT1 and DUT2 route IPv4 over Vhost to LISP GPE tunnel using IPsec (transport) on lisp_gpe0 Int. +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. +| | ... | [Enc] Eth-IPv4-IPSec-LISPGPE-IPv4-ICMPv4 on DUT1-DUT2,\ +| | ... | Eth-IPv4-ICMPv4 on TG-DUTn. +| | ... | [Cfg] Configure IPv4 LISP static adjacencies on DUT1 and DUT2 with\ +| | ... | IPsec in between DUTS. +| | ... | [Ver] Case: ip4-ipsec-lispgpe-ip4 - main fib, virt2lisp\ +| | ... | Make TG send ICMPv4 Echo Req between its interfaces across\ +| | ... | both DUTs and LISP GPE tunnel between them; verify IPv4 headers on\ +| | ... | received packets are correct. +| | ... | [Ref] RFC6830, RFC4303. +| | [Teardown] | Run Keywords | Show Packet Trace on All DUTs | ${nodes} +| | ... | AND | Show vpp trace dump on all DUTs +| | ... | AND | Stop and Clear QEMU | ${dut1_node} | ${vm_node} +| | ... | AND | Show VPP Settings | ${dut1_node} +| | ... | AND | Show VPP Settings | ${dut2_node} +| | ... | AND | Check VPP PID in Teardown +| | ... +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Setup 3-node Topology +| | And Add IP Neighbors +| | And Setup Qemu DUT1 +| | And Set up LISP GPE topology +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE} +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid} +| | ... | ${dut1_to_dut2_ip4_static_adjacency} +| | ... | ${dut2_to_dut1_ip4_static_adjacency} +| | ${lisp1_if_idx}= | resources.libraries.python.InterfaceUtil.Get Sw If Index +| | ... | ${dut1_node} | lisp_gpe0 +| | ${lisp2_if_idx}= | resources.libraries.python.InterfaceUtil.Get Sw If Index +| | ... | ${dut2_node} | lisp_gpe0 +| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg} +| | When VPP Setup IPsec Manual Keyed Connection +| | ... | ${dut1_node} | ${lisp1_if_idx} | ${encr_alg} | ${encr_key} +| | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi} +| | ... | ${dut1_to_dut2_ip4} | ${dut2_to_dut1_ip4} +| | And VPP Setup IPsec Manual Keyed Connection +| | ... | ${dut2_node} | ${lisp2_if_idx} | ${encr_alg} | ${encr_key} +| | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi} +| | ... | ${dut2_to_dut1_ip4} | ${dut1_to_dut2_ip4} +| | Then Send Packet And Check Headers +| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4} +| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dst_vhost_mac} +| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} +| | And Send Packet And Check Headers +| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4} +| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} +| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} + +*** Keywords *** +| Setup 3-node Topology +| | [Documentation] +| | ... | Setup 3-node topology for this test suite. Set all physical\ +| | ... | interfaces up and assing IP adresses to them.\ +| | ... | You can specify fib table ID where the DUT-TG interfaces assign to.\ +| | ... | Default is 0. +| | ... +| | [Arguments] | ${fib_table}=0 +| | Path for 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | Interfaces in 3-node path are up +| | Assign Interface To Fib Table | ${dut1_node} +| | ... | ${dut1_to_tg} | ${fib_table} +| | Assign Interface To Fib Table | ${dut2_node} +| | ... | ${dut2_to_tg} | ${fib_table} +| | Set Interface Address | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip4} +| | ... | ${prefix4} +| | Set Interface Address | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip4} +| | ... | ${prefix4} +| | Set Interface Address | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_dut1_ip4} +| | ... | ${prefix4} +| | Set Interface Address | ${dut2_node} | ${dut2_to_tg} | ${dut2_to_tg_ip4} +| | ... | ${prefix4} + +| Add IP Neighbors +| | [Documentation] +| | ... | Add IP neighbors to physical interfaces on DUTs.\ +| | ... | You can specify fib table ID for DUT-TG interfaces. Default is 0. +| | ... +| | [Arguments] | ${fib_id}=0 +| | Add IP Neighbor | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip4} +| | ... | ${tg_to_dut1_mac} | ${fib_id} +| | Add IP Neighbor | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip4} +| | ... | ${tg_to_dut2_mac} | ${fib_id} +| | Add IP Neighbor | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip4} +| | ... | ${dut2_to_dut1_mac} +| | Add IP Neighbor | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip4} +| | ... | ${dut1_to_dut2_mac} + +| Setup Qemu DUT1 +| | [Documentation] | Setup Vhosts on DUT1 and setup IP to one of them. Setup \ +| | ... | Qemu and bridge the vhosts. +| | ${vhost1}= | And Vpp Create Vhost User Interface | ${dut1_node} | ${sock1} +| | ${vhost2}= | And Vpp Create Vhost User Interface | ${dut1_node} | ${sock2} +| | Set Interface Address | ${dut1_node} | ${vhost2} | 6.6.1.9 +| | ... | ${prefix4} +| | Set Interface State | ${dut1_node} | ${vhost1} | up +| | Set Interface State | ${dut1_node} | ${vhost2} | up +| | Bridge domain on DUT node is created | ${dut1_node} | ${bid} | learn=${TRUE} +| | Interface is added to bridge domain | ${dut1_node} +| | ... | ${dut1_to_tg} | ${bid} | 0 +| | Interface is added to bridge domain | ${dut1_node} +| | ... | ${vhost1} | ${bid} | 0 +| | ${vhost_mac}= | Get Vhost User Mac By SW Index | ${dut1_node} | ${vhost2} +| | Set test variable | ${dst_vhost_mac} | ${vhost_mac} +| | VM for Vhost L2BD forwarding is setup | ${dut1_node} | ${sock1} | ${sock2} diff --git a/tests/func/lisp/ipsec_ipv4_lispgpe_ipv4.robot b/tests/func/lisp/eth2p-ethip4ipsectptlispgpe-ip4base-func.robot index 18494ab565..f3af311fd0 100644 --- a/tests/func/lisp/ipsec_ipv4_lispgpe_ipv4.robot +++ b/tests/func/lisp/eth2p-ethip4ipsectptlispgpe-ip4base-func.robot @@ -42,7 +42,7 @@ | ... | AND | Show Vpp Settings | ${nodes['DUT2']} | ... | AND | Check VPP PID in Teardown | ... -| Documentation | *IPv4-ip4-ipsec-lispgpe-ip4 - main fib, vrf (gpe_vni-to-vrf) +| Documentation | *IPv4-ip4-ipsec-lispgpe-ip4 - main fib, vrf (gpe_vni-to-vrf)* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ | ... | with single links between nodes. @@ -57,9 +57,9 @@ *** Variables *** | ${dut2_spi}= | ${1000} | ${dut1_spi}= | ${1001} + | ${ESP_PROTO}= | ${50} -| ${sock1}= | /tmp/sock1 -| ${sock2}= | /tmp/sock2 + | ${bid}= | 10 *** Test Cases *** @@ -233,107 +233,6 @@ | | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} | | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} -| TC05: DUT1 and DUT2 route IPv4 over Vhost to LISP GPE tunnel using IPsec (transport) on RLOC Int. -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. -| | ... | [Enc] Eth-IPv4-IPSec-LISPGPE-IPv4-ICMP on DUT1-DUT2, Eth-IPv4-ICMP\ -| | ... | on TG-DUTn. -| | ... | [Cfg] Configure IPv4 LISP static adjacencies on DUT1 and DUT2 with\ -| | ... | IPsec in between DUTS. Create Qemu vm on DUT1 and configure bridge\ -| | ... | between two vhosts. -| | ... | [Ver] Case: ip4-ipsec-lispgpe-ip4 - main fib, virt2lisp\ -| | ... | Make TG send ICMPv4 Echo Req between its interfaces across\ -| | ... | both DUTs and LISP GPE tunnel between them; verify IPv4 headers on\ -| | ... | received packets are correct. -| | ... | [Ref] RFC6830, RFC4303. -| | [Teardown] | Run Keywords | Show Packet Trace on All DUTs | ${nodes} -| | ... | AND | Show vpp trace dump on all DUTs -| | ... | AND | Stop and Clear QEMU | ${dut1_node} | ${vm_node} -| | ... | AND | Show VPP Settings | ${dut1_node} -| | ... | AND | Show VPP Settings | ${dut2_node} -| | ... | AND | Check VPP PID in Teardown -| | ... -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Setup 3-node Topology -| | And Add IP Neighbors -| | And Setup Qemu DUT1 -| | And Set up LISP GPE topology -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE} -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid} -| | ... | ${dut1_to_dut2_ip4_static_adjacency} -| | ... | ${dut2_to_dut1_ip4_static_adjacency} -| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg} -| | When VPP Setup IPsec Manual Keyed Connection -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${encr_alg} | ${encr_key} -| | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi} -| | ... | ${dut1_to_dut2_ip4} | ${dut2_to_dut1_ip4} -| | And VPP Setup IPsec Manual Keyed Connection -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${encr_alg} | ${encr_key} -| | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi} -| | ... | ${dut2_to_dut1_ip4} | ${dut1_to_dut2_ip4} -| | Then Send Packet And Check Headers -| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4} -| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dst_vhost_mac} -| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} -| | And Send Packet And Check Headers -| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4} -| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} -| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} - -| TC06: DUT1 and DUT2 route IPv4 over Vhost to LISP GPE tunnel using IPsec (transport) on lisp_gpe0 Int. -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. -| | ... | [Enc] Eth-IPv4-IPSec-LISPGPE-IPv4-ICMPv4 on DUT1-DUT2,\ -| | ... | Eth-IPv4-ICMPv4 on TG-DUTn. -| | ... | [Cfg] Configure IPv4 LISP static adjacencies on DUT1 and DUT2 with\ -| | ... | IPsec in between DUTS. -| | ... | [Ver] Case: ip4-ipsec-lispgpe-ip4 - main fib, virt2lisp\ -| | ... | Make TG send ICMPv4 Echo Req between its interfaces across\ -| | ... | both DUTs and LISP GPE tunnel between them; verify IPv4 headers on\ -| | ... | received packets are correct. -| | ... | [Ref] RFC6830, RFC4303. -| | [Teardown] | Run Keywords | Show Packet Trace on All DUTs | ${nodes} -| | ... | AND | Show vpp trace dump on all DUTs -| | ... | AND | Stop and Clear QEMU | ${dut1_node} | ${vm_node} -| | ... | AND | Show VPP Settings | ${dut1_node} -| | ... | AND | Show VPP Settings | ${dut2_node} -| | ... | AND | Check VPP PID in Teardown -| | ... -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Setup 3-node Topology -| | And Add IP Neighbors -| | And Setup Qemu DUT1 -| | And Set up LISP GPE topology -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE} -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid} -| | ... | ${dut1_to_dut2_ip4_static_adjacency} -| | ... | ${dut2_to_dut1_ip4_static_adjacency} -| | ${lisp1_if_idx}= | resources.libraries.python.InterfaceUtil.Get Sw If Index -| | ... | ${dut1_node} | lisp_gpe0 -| | ${lisp2_if_idx}= | resources.libraries.python.InterfaceUtil.Get Sw If Index -| | ... | ${dut2_node} | lisp_gpe0 -| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg} -| | When VPP Setup IPsec Manual Keyed Connection -| | ... | ${dut1_node} | ${lisp1_if_idx} | ${encr_alg} | ${encr_key} -| | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi} -| | ... | ${dut1_to_dut2_ip4} | ${dut2_to_dut1_ip4} -| | And VPP Setup IPsec Manual Keyed Connection -| | ... | ${dut2_node} | ${lisp2_if_idx} | ${encr_alg} | ${encr_key} -| | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi} -| | ... | ${dut2_to_dut1_ip4} | ${dut1_to_dut2_ip4} -| | Then Send Packet And Check Headers -| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4} -| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dst_vhost_mac} -| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} -| | And Send Packet And Check Headers -| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4} -| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} -| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} - *** Keywords *** | Setup 3-node Topology | | [Documentation] @@ -373,21 +272,3 @@ | | ... | ${dut2_to_dut1_mac} | | Add IP Neighbor | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip4} | | ... | ${dut1_to_dut2_mac} - -| Setup Qemu DUT1 -| | [Documentation] | Setup Vhosts on DUT1 and setup IP to one of them. Setup \ -| | ... | Qemu and bridge the vhosts. -| | ${vhost1}= | And Vpp Create Vhost User Interface | ${dut1_node} | ${sock1} -| | ${vhost2}= | And Vpp Create Vhost User Interface | ${dut1_node} | ${sock2} -| | Set Interface Address | ${dut1_node} | ${vhost2} | 6.6.1.9 -| | ... | ${prefix4} -| | Set Interface State | ${dut1_node} | ${vhost1} | up -| | Set Interface State | ${dut1_node} | ${vhost2} | up -| | Bridge domain on DUT node is created | ${dut1_node} | ${bid} | learn=${TRUE} -| | Interface is added to bridge domain | ${dut1_node} -| | ... | ${dut1_to_tg} | ${bid} | 0 -| | Interface is added to bridge domain | ${dut1_node} -| | ... | ${vhost1} | ${bid} | 0 -| | ${vhost_mac}= | Get Vhost User Mac By SW Index | ${dut1_node} | ${vhost2} -| | Set test variable | ${dst_vhost_mac} | ${vhost_mac} -| | VM for Vhost L2BD forwarding is setup | ${dut1_node} | ${sock1} | ${sock2} diff --git a/tests/func/lisp/ipsec_ipv6_lispgpe_ipv4.robot b/tests/func/lisp/eth2p-ethip4ipsectptlispgpe-ip6base-eth-2vhost-1vm-func.robot index 2002d9e615..d8bdab78fb 100644 --- a/tests/func/lisp/ipsec_ipv6_lispgpe_ipv4.robot +++ b/tests/func/lisp/eth2p-ethip4ipsectptlispgpe-ip6base-eth-2vhost-1vm-func.robot @@ -50,85 +50,17 @@ | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:*Eth-IPv4-LISPGPE-IPSec-IPv6-ICMP,\ +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-LISPGPE-IPSec-IPv6-ICMP,\ | ... | Eth-IPv4-IPSec-LISPGPE-IPv6-ICMP | ... | *[Cfg] DUT configuration:* Each DUT is configured with LISP and IPsec.\ | ... | IPsec is in transport mode. Tests cases are for IPsec configured both\ | ... | on RLOC interface or lisp_gpe0 interface. -| ... | *[Ver] TG verification:* Packet is send from TG(if1) across the DUT1 to\ -| ... | DUT2 where it is forwarded to TG(if2). +| ... | *[Ver] TG verification:* Packet is send from TG(if1) across the DUT1\ +| ... | via VM to DUT2 where it is forwarded to TG(if2). | ... | *[Ref] Applicable standard specifications:* RFC6830, RFC4303. *** Test Cases *** -| TC01: DUT1 and DUT2 route IPv4 bidirectionally over LISP GPE tunnel using IPsec (transport) on RLOC Int. -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. -| | ... | [Enc] Eth-IPv4-LISPGPE-IPSec-IPv6-ICMP on DUT1-DUT2, Eth-IPv6-ICMP\ -| | ... | on TG-DUTn. -| | ... | [Cfg] Configure IPv6 LISP static adjacencies on DUT1 and DUT2 with\ -| | ... | IPsec in between DUTS. -| | ... | [Ver] Make TG send ICMPv6 Echo Req between its interfaces across\ -| | ... | both DUTs and LISP GPE tunnel between them; verify IPv6 headers on\ -| | ... | received packets are correct. -| | ... | [Ref] RFC6830, RFC4303. -| | ... -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Setup Topology And Lisp -| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg} -| | When VPP Setup IPsec Manual Keyed Connection -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${encr_alg} | ${encr_key} -| | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi} -| | ... | ${dut1_to_dut2_ip4} | ${dut2_to_dut1_ip4} -| | And VPP Setup IPsec Manual Keyed Connection -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${encr_alg} | ${encr_key} -| | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi} -| | ... | ${dut2_to_dut1_ip4} | ${dut1_to_dut2_ip4} -| | Then Send Packet And Check Headers -| | ... | ${tg_node} | ${tg1_ip6} | ${tg2_ip6} -| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} -| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} -| | And Send Packet And Check Headers -| | ... | ${tg_node} | ${tg2_ip6} | ${tg1_ip6} -| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} -| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} - -| TC02: DUT1 and DUT2 route IPv4 bidirectionally over LISP GPE tunnel using IPsec (transport) on lisp_gpe0 Int. -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. -| | ... | [Enc] Eth-IPv4-IPSec-LISPGPE-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMP\ -| | ... | on TG-DUTn. -| | ... | [Cfg] Configure IPv4 LISP static adjacencies on DUT1 and DUT2 with\ -| | ... | IPsec in between DUTS. -| | ... | [Ver] Make TG send ICMPv6 Echo Req between its interfaces across\ -| | ... | both DUTs and LISP GPE tunnel between them; verify IPv6 headers on\ -| | ... | received packets are correct. -| | ... | [Ref] RFC6830, RFC4303. -| | ... -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Setup Topology And Lisp -| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg} -| | ${lisp_if_idx}= | resources.libraries.python.InterfaceUtil.get sw if index -| | ... | ${dut1_node} | ${lisp_gpe_int} -| | When VPP Setup IPsec Manual Keyed Connection -| | ... | ${dut1_node} | ${lisp_if_idx} | ${encr_alg} | ${encr_key} -| | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi} -| | ... | ${dut1_to_dut2_ip4} | ${dut2_to_dut1_ip4} -| | And VPP Setup IPsec Manual Keyed Connection -| | ... | ${dut2_node} | ${lisp_if_idx} | ${encr_alg} | ${encr_key} -| | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi} -| | ... | ${dut2_to_dut1_ip4} | ${dut1_to_dut2_ip4} -| | Then Send Packet And Check Headers -| | ... | ${tg_node} | ${tg1_ip6} | ${tg2_ip6} -| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} -| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} -| | And Send Packet And Check Headers -| | ... | ${tg_node} | ${tg2_ip6} | ${tg1_ip6} -| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} -| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} - -| TC03: DUT1 and DUT2 route IPv6 over Vhost to LISP GPE tunnel using IPsec (transport) on RLOC Int. +| TC01: DUT1 and DUT2 route IPv6 over Vhost to LISP GPE tunnel using IPsec (transport) on RLOC Int. | | [Documentation] | | ... | [Top] TG-DUT1-DUT2-TG. | | ... | [Enc] Eth-IPv4-LISPGPE-IPSec-IPv6-ICMP on DUT1-DUT2, Eth-IPv6-ICMP\ @@ -170,7 +102,7 @@ | | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} | | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} -| TC04: DUT1 and DUT2 route IPv6 over Vhost to LISP GPE tunnel using IPsec (transport) on lisp_gpe0 Int. +| TC02: DUT1 and DUT2 route IPv6 over Vhost to LISP GPE tunnel using IPsec (transport) on lisp_gpe0 Int. | | [Documentation] | | ... | [Top] TG-DUT1-DUT2-TG. | | ... | [Enc] Eth-IPv4-IPSec-LISPGPE-IPv6-ICMPv6 on DUT1-DUT2,\ @@ -215,53 +147,6 @@ | | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} | | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} -| TC05: DUT1 and DUT2 route IPv6 bidirectionally over LISP GPE tunnel using physical interfaces and VRF is enabled -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. -| | ... | [Enc] Eth-IPv4-IPSec-LISPGPE-IPv6-ICMPv6 on DUT1-DUT2,\ -| | ... | Eth-IPv6-ICMPv6, on TG-DUTn. -| | ... | [Cfg] Configure IPv4 LISP static adjacencies on DUT1 and DUT2 with\ -| | ... | IPsec in between DUTS. -| | ... | [Ver] Case: ip4-ipsec-lispgpe-ip6 - vrf, phy2lisp -| | ... | Make TG send ICMPv6 Echo Req between its interfaces across both\ -| | ... | DUTs and LISP GPE tunnel between them; verify IPv6 headers on\ -| | ... | received packets are correct. -| | ... | [Ref] RFC6830, RFC4303. -| | ... -| | [Teardown] | Run Keywords | Show Packet Trace on All DUTs | ${nodes} -| | ... | AND | Show vpp trace dump on all DUTs -| | ... | AND | Show Vpp Settings | ${nodes['DUT1']} -| | ... | AND | Show Vpp Settings | ${nodes['DUT2']} -| | ... | AND | Check VPP PID in Teardown -| | ... -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Path for 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in 3-node path are up -| | Assign Interface To Fib Table | ${dut1_node} -| | ... | ${dut1_to_tg} | ${fib_table_1} | ip6=${TRUE} -| | Assign Interface To Fib Table | ${dut2_node} -| | ... | ${dut2_to_tg} | ${fib_table_1} | ip6=${TRUE} -| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg} -| | When VPP Setup IPsec Manual Keyed Connection -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${encr_alg} | ${encr_key} -| | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi} -| | ... | ${dut1_to_dut2_ip4} | ${dut2_to_dut1_ip4} -| | And VPP Setup IPsec Manual Keyed Connection -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${encr_alg} | ${encr_key} -| | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi} -| | ... | ${dut2_to_dut1_ip4} | ${dut1_to_dut2_ip4} -| | Setup Topology And Lisp | ${fib_table_1} | ${dut1_dut2_vni} -| | Then Send Packet And Check Headers -| | ... | ${tg_node} | ${tg1_ip6} | ${tg2_ip6} -| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} -| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} -| | And Send Packet And Check Headers -| | ... | ${tg_node} | ${tg2_ip6} | ${tg1_ip6} -| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} -| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} - *** Keywords *** | Setup Topology And Lisp | | [Documentation] | Setup IPs and neighbors for interfaces on DUT1 and DUT2\ diff --git a/tests/func/lisp/eth2p-ethip4ipsectptlispgpe-ip6base-func.robot b/tests/func/lisp/eth2p-ethip4ipsectptlispgpe-ip6base-func.robot new file mode 100644 index 0000000000..2bc4a2cb93 --- /dev/null +++ b/tests/func/lisp/eth2p-ethip4ipsectptlispgpe-ip6base-func.robot @@ -0,0 +1,161 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Library | resources.libraries.python.topology.Topology +| Library | resources.libraries.python.NodePath +| Library | resources.libraries.python.Trace +| Library | resources.libraries.python.IPUtil +| Library | resources.libraries.python.L2Util +| Library | resources.libraries.python.LispUtil +| Library | resources.libraries.python.IPsecUtil +| Library | resources.libraries.python.VatJsonUtil +| Library | resources.libraries.python.IPv6Setup +| Library | resources.libraries.python.VhostUser +| Library | resources.libraries.python.QemuUtils +| Library | resources.libraries.python.VPPUtil +| Library | String +| Resource | resources/libraries/robot/traffic.robot +| Resource | resources/libraries/robot/default.robot +| Resource | resources/libraries/robot/interfaces.robot +| Resource | resources/libraries/robot/testing_path.robot +| Resource | resources/libraries/robot/ipv6.robot +| Resource | resources/libraries/robot/ipsec.robot +| Resource | resources/libraries/robot/qemu.robot +| Resource | resources/libraries/robot/lisp/lispgpe.robot +| Resource | resources/libraries/robot/bridge_domain.robot +# Import configuration and test data: +| Variables | resources/test_data/lisp/ipv6_lispgpe_ipv4/ipv6_lispgpe_ipsec_ipv4.py +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | LISP +| ... +| Test Setup | Func Test Setup +| Test Teardown | Run Keywords | Show Packet Trace on All DUTs | ${nodes} +| ... | AND | Show vpp trace dump on all DUTs +| ... | AND | Show Vpp Settings | ${nodes['DUT1']} +| ... | AND | Show Vpp Settings | ${nodes['DUT2']} +| ... | AND | Check VPP PID in Teardown +| ... +| Documentation | *IPv6 - ip4-ipsec-lispgpe-ip6 - main fib, vrf, virt2lisp,\ +| ... | phy2lisp* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-LISPGPE-IPSec-IPv6-ICMP,\ +| ... | Eth-IPv4-IPSec-LISPGPE-IPv6-ICMP +| ... | *[Cfg] DUT configuration:* Each DUT is configured with LISP and IPsec.\ +| ... | IPsec is in transport mode. Tests cases are for IPsec configured both\ +| ... | on RLOC interface or lisp_gpe0 interface. +| ... | *[Ver] TG verification:* Packet is send from TG(if1) across the DUT1 to\ +| ... | DUT2 where it is forwarded to TG(if2). +| ... | *[Ref] Applicable standard specifications:* RFC6830, RFC4303. + +*** Test Cases *** +| TC01: DUT1 and DUT2 route IPv4 bidirectionally over LISP GPE tunnel using IPsec (transport) on RLOC Int. +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. +| | ... | [Enc] Eth-IPv4-LISPGPE-IPSec-IPv6-ICMP on DUT1-DUT2, Eth-IPv6-ICMP\ +| | ... | on TG-DUTn. +| | ... | [Cfg] Configure IPv6 LISP static adjacencies on DUT1 and DUT2 with\ +| | ... | IPsec in between DUTS. +| | ... | [Ver] Make TG send ICMPv6 Echo Req between its interfaces across\ +| | ... | both DUTs and LISP GPE tunnel between them; verify IPv6 headers on\ +| | ... | received packets are correct. +| | ... | [Ref] RFC6830, RFC4303. +| | ... +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Setup Topology And Lisp +| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg} +| | When VPP Setup IPsec Manual Keyed Connection +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${encr_alg} | ${encr_key} +| | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi} +| | ... | ${dut1_to_dut2_ip4} | ${dut2_to_dut1_ip4} +| | And VPP Setup IPsec Manual Keyed Connection +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${encr_alg} | ${encr_key} +| | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi} +| | ... | ${dut2_to_dut1_ip4} | ${dut1_to_dut2_ip4} +| | Then Send Packet And Check Headers +| | ... | ${tg_node} | ${tg1_ip6} | ${tg2_ip6} +| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} +| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} +| | And Send Packet And Check Headers +| | ... | ${tg_node} | ${tg2_ip6} | ${tg1_ip6} +| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} +| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} + +| TC02: DUT1 and DUT2 route IPv4 bidirectionally over LISP GPE tunnel using IPsec (transport) on lisp_gpe0 Int. +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. +| | ... | [Enc] Eth-IPv4-IPSec-LISPGPE-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMP\ +| | ... | on TG-DUTn. +| | ... | [Cfg] Configure IPv4 LISP static adjacencies on DUT1 and DUT2 with\ +| | ... | IPsec in between DUTS. +| | ... | [Ver] Make TG send ICMPv6 Echo Req between its interfaces across\ +| | ... | both DUTs and LISP GPE tunnel between them; verify IPv6 headers on\ +| | ... | received packets are correct. +| | ... | [Ref] RFC6830, RFC4303. +| | ... +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Setup Topology And Lisp +| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg} +| | ${lisp_if_idx}= | resources.libraries.python.InterfaceUtil.get sw if index +| | ... | ${dut1_node} | ${lisp_gpe_int} +| | When VPP Setup IPsec Manual Keyed Connection +| | ... | ${dut1_node} | ${lisp_if_idx} | ${encr_alg} | ${encr_key} +| | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi} +| | ... | ${dut1_to_dut2_ip4} | ${dut2_to_dut1_ip4} +| | And VPP Setup IPsec Manual Keyed Connection +| | ... | ${dut2_node} | ${lisp_if_idx} | ${encr_alg} | ${encr_key} +| | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi} +| | ... | ${dut2_to_dut1_ip4} | ${dut1_to_dut2_ip4} +| | Then Send Packet And Check Headers +| | ... | ${tg_node} | ${tg1_ip6} | ${tg2_ip6} +| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} +| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} +| | And Send Packet And Check Headers +| | ... | ${tg_node} | ${tg2_ip6} | ${tg1_ip6} +| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} +| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} + +*** Keywords *** +| Setup Topology And Lisp +| | [Documentation] | Setup IPs and neighbors for interfaces on DUT1 and DUT2\ +| | ... | and then setup LISP. +| | [Arguments] | ${fib_table}=0 | ${vni_table}=0 | ${ip6}=${FALSE} +| | Path for 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | Interfaces in 3-node path are up +| | Vpp Set If IPv6 Addr | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip4} +| | ... | ${prefix4} +| | Vpp Set If IPv6 Addr | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip6} +| | ... | ${prefix6} +| | Vpp Set If IPv6 Addr | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_dut1_ip4} +| | ... | ${prefix4} +| | Vpp Set If IPv6 Addr | ${dut2_node} | ${dut2_to_tg} | ${dut2_to_tg_ip6} +| | ... | ${prefix6} +| | Add IP Neighbor | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip6} +| | ... | ${tg_to_dut2_mac} | ${fib_table} +| | Add IP Neighbor | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip4} +| | ... | ${dut2_to_dut1_mac} +| | Add IP Neighbor | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip4} +| | ... | ${dut1_to_dut2_mac} +| | Add IP Neighbor | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip6} +| | ... | ${tg_to_dut1_mac} | ${fib_table} +| | Set up LISP GPE topology +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE} +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid} +| | ... | ${dut1_to_dut2_ip_static_adjacency} +| | ... | ${dut2_to_dut1_ip_static_adjacency} +| | ... | ${vni_table} | ${fib_table} diff --git a/tests/func/lisp/eth2p-ethip4ipsectptlispgpe-ip6basevrf-func.robot b/tests/func/lisp/eth2p-ethip4ipsectptlispgpe-ip6basevrf-func.robot new file mode 100644 index 0000000000..06b883281c --- /dev/null +++ b/tests/func/lisp/eth2p-ethip4ipsectptlispgpe-ip6basevrf-func.robot @@ -0,0 +1,140 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Library | resources.libraries.python.topology.Topology +| Library | resources.libraries.python.NodePath +| Library | resources.libraries.python.Trace +| Library | resources.libraries.python.IPUtil +| Library | resources.libraries.python.L2Util +| Library | resources.libraries.python.LispUtil +| Library | resources.libraries.python.IPsecUtil +| Library | resources.libraries.python.VatJsonUtil +| Library | resources.libraries.python.IPv6Setup +| Library | resources.libraries.python.VhostUser +| Library | resources.libraries.python.QemuUtils +| Library | resources.libraries.python.VPPUtil +| Library | String +| Resource | resources/libraries/robot/traffic.robot +| Resource | resources/libraries/robot/default.robot +| Resource | resources/libraries/robot/interfaces.robot +| Resource | resources/libraries/robot/testing_path.robot +| Resource | resources/libraries/robot/ipv6.robot +| Resource | resources/libraries/robot/ipsec.robot +| Resource | resources/libraries/robot/qemu.robot +| Resource | resources/libraries/robot/lisp/lispgpe.robot +| Resource | resources/libraries/robot/bridge_domain.robot +# Import configuration and test data: +| Variables | resources/test_data/lisp/ipv6_lispgpe_ipv4/ipv6_lispgpe_ipsec_ipv4.py +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | LISP +| ... +| Test Setup | Func Test Setup +| Test Teardown | Run Keywords | Show Packet Trace on All DUTs | ${nodes} +| ... | AND | Show vpp trace dump on all DUTs +| ... | AND | Show Vpp Settings | ${nodes['DUT1']} +| ... | AND | Show Vpp Settings | ${nodes['DUT2']} +| ... | AND | Check VPP PID in Teardown +| ... +| Documentation | *IPv6 - ip4-ipsec-lispgpe-ip6 - main fib, vrf, virt2lisp,\ +| ... | phy2lisp* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-LISPGPE-IPSec-IPv6-ICMP,\ +| ... | Eth-IPv4-IPSec-LISPGPE-IPv6-ICMP +| ... | *[Cfg] DUT configuration:* Each DUT is configured with LISP and IPsec.\ +| ... | IPsec is in transport mode. Tests cases are for IPsec configured both\ +| ... | on RLOC interface or lisp_gpe0 interface. +| ... | *[Ver] TG verification:* Packet is send from TG(if1) across the DUT1 to\ +| ... | DUT2 where it is forwarded to TG(if2). +| ... | *[Ref] Applicable standard specifications:* RFC6830, RFC4303. + +*** Test Cases *** +| TC01: DUT1 and DUT2 route IPv6 bidirectionally over LISP GPE tunnel using physical interfaces and VRF is enabled +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. +| | ... | [Enc] Eth-IPv4-IPSec-LISPGPE-IPv6-ICMPv6 on DUT1-DUT2,\ +| | ... | Eth-IPv6-ICMPv6, on TG-DUTn. +| | ... | [Cfg] Configure IPv4 LISP static adjacencies on DUT1 and DUT2 with\ +| | ... | IPsec in between DUTS. +| | ... | [Ver] Case: ip4-ipsec-lispgpe-ip6 - vrf, phy2lisp +| | ... | Make TG send ICMPv6 Echo Req between its interfaces across both\ +| | ... | DUTs and LISP GPE tunnel between them; verify IPv6 headers on\ +| | ... | received packets are correct. +| | ... | [Ref] RFC6830, RFC4303. +| | ... +| | [Teardown] | Run Keywords | Show Packet Trace on All DUTs | ${nodes} +| | ... | AND | Show vpp trace dump on all DUTs +| | ... | AND | Show Vpp Settings | ${nodes['DUT1']} +| | ... | AND | Show Vpp Settings | ${nodes['DUT2']} +| | ... | AND | Check VPP PID in Teardown +| | ... +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Path for 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in 3-node path are up +| | Assign Interface To Fib Table | ${dut1_node} +| | ... | ${dut1_to_tg} | ${fib_table_1} | ip6=${TRUE} +| | Assign Interface To Fib Table | ${dut2_node} +| | ... | ${dut2_to_tg} | ${fib_table_1} | ip6=${TRUE} +| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg} +| | When VPP Setup IPsec Manual Keyed Connection +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${encr_alg} | ${encr_key} +| | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi} +| | ... | ${dut1_to_dut2_ip4} | ${dut2_to_dut1_ip4} +| | And VPP Setup IPsec Manual Keyed Connection +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${encr_alg} | ${encr_key} +| | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi} +| | ... | ${dut2_to_dut1_ip4} | ${dut1_to_dut2_ip4} +| | Setup Topology And Lisp | ${fib_table_1} | ${dut1_dut2_vni} +| | Then Send Packet And Check Headers +| | ... | ${tg_node} | ${tg1_ip6} | ${tg2_ip6} +| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} +| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} +| | And Send Packet And Check Headers +| | ... | ${tg_node} | ${tg2_ip6} | ${tg1_ip6} +| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} +| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} + +*** Keywords *** +| Setup Topology And Lisp +| | [Documentation] | Setup IPs and neighbors for interfaces on DUT1 and DUT2\ +| | ... | and then setup LISP. +| | [Arguments] | ${fib_table}=0 | ${vni_table}=0 | ${ip6}=${FALSE} +| | Path for 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | Interfaces in 3-node path are up +| | Vpp Set If IPv6 Addr | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip4} +| | ... | ${prefix4} +| | Vpp Set If IPv6 Addr | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip6} +| | ... | ${prefix6} +| | Vpp Set If IPv6 Addr | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_dut1_ip4} +| | ... | ${prefix4} +| | Vpp Set If IPv6 Addr | ${dut2_node} | ${dut2_to_tg} | ${dut2_to_tg_ip6} +| | ... | ${prefix6} +| | Add IP Neighbor | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip6} +| | ... | ${tg_to_dut2_mac} | ${fib_table} +| | Add IP Neighbor | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip4} +| | ... | ${dut2_to_dut1_mac} +| | Add IP Neighbor | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip4} +| | ... | ${dut1_to_dut2_mac} +| | Add IP Neighbor | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip6} +| | ... | ${tg_to_dut1_mac} | ${fib_table} +| | Set up LISP GPE topology +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE} +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid} +| | ... | ${dut1_to_dut2_ip_static_adjacency} +| | ... | ${dut2_to_dut1_ip_static_adjacency} +| | ... | ${vni_table} | ${fib_table} diff --git a/tests/func/lisp/dataplane_generic.robot b/tests/func/lisp/eth2p-ethip4lisp-ip4base-func.robot index 9ab69b2d71..9ab69b2d71 100644 --- a/tests/func/lisp/dataplane_generic.robot +++ b/tests/func/lisp/eth2p-ethip4lisp-ip4base-func.robot diff --git a/tests/func/lisp/l2_lisp_ipv4.robot b/tests/func/lisp/eth2p-ethip4lisp-l2bdbasemaclrn-func.robot index c0a411cc4a..c0a411cc4a 100644 --- a/tests/func/lisp/l2_lisp_ipv4.robot +++ b/tests/func/lisp/eth2p-ethip4lisp-l2bdbasemaclrn-func.robot diff --git a/tests/func/lisp/eth2p-ethip4lispgpe-ip4base-eth-2vhost-1vm-func.robot b/tests/func/lisp/eth2p-ethip4lispgpe-ip4base-eth-2vhost-1vm-func.robot new file mode 100644 index 0000000000..a63925bcd4 --- /dev/null +++ b/tests/func/lisp/eth2p-ethip4lispgpe-ip4base-eth-2vhost-1vm-func.robot @@ -0,0 +1,131 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Library | resources.libraries.python.topology.Topology +| Library | resources.libraries.python.NodePath +| Library | resources.libraries.python.Trace +| Library | resources.libraries.python.IPUtil +| Library | resources.libraries.python.VPPUtil +| Library | resources.libraries.python.InterfaceUtil +| Library | resources.libraries.python.VhostUser +| Resource | resources/libraries/robot/traffic.robot +| Resource | resources/libraries/robot/default.robot +| Resource | resources/libraries/robot/interfaces.robot +| Resource | resources/libraries/robot/testing_path.robot +| Resource | resources/libraries/robot/ipv4.robot +| Resource | resources/libraries/robot/vrf.robot +| Resource | resources/libraries/robot/qemu.robot +| Resource | resources/libraries/robot/bridge_domain.robot +| Resource | resources/libraries/robot/lisp/lispgpe.robot +# Import configuration and test data: +| Variables | resources/test_data/lisp/ipv4_lispgpe_ipv4/ipv4_lispgpe_ipv4.py +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | LISP +| ... +| Test Setup | Func Test Setup +| Test Teardown | Run Keywords | Show Packet Trace on All DUTs | ${nodes} +| ... | AND | Show vpp trace dump on all DUTs +| ... | AND | Show Vpp Settings | ${nodes['DUT1']} +| ... | AND | Show Vpp Settings | ${nodes['DUT2']} +| ... | AND | Check VPP PID in Teardown +| ... +| Documentation | *ip4-lispgpe-ip4 encapsulation test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-LISP-IPv4-ICMPv4 on DUT1-DUT2,\ +| ... | Eth-IPv4-ICMPv4 on TG-DUTn for IPv4 routing over LISPoIPv4 tunnel. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\ +| ... | routing and static routes. LISPoIPv4 tunnel is configured between\ +| ... | DUT1 and DUT2. +| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are sent in\ +| ... | both directions by TG on links to DUT1 and DUT2; on receive\ +| ... | TG verifies packets for correctness and their IPv4 src-addr, dst-addr\ +| ... | and MAC addresses. +| ... | *[Ref] Applicable standard specifications:* RFC6830. + +*** Test Cases *** +| TC01: DUT1 and DUT2 route IPv4 bidirectionally over LISP GPE tunnel using vhost interfaces +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. +| | ... | [Enc] Eth-IPv4-LISPGPE-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on\ +| | ... | TG-DUTn. +| | ... | [Cfg] Configure IPv4 LISP static adjacencies on DUT1 and DUT2. +| | ... | [Ver] Case: ip4-lispgpe-ip4 - main fib, virt2lisp +| | ... | Make TG send ICMPv4 Echo Req between its interfaces across both\ +| | ... | DUTs and LISP GPE tunnel between them; verify IPv4 headers on\ +| | ... | received packets are correct. +| | ... +| | [Teardown] | Run Keywords | Show Packet Trace on All DUTs | ${nodes} +| | ... | AND | Show vpp trace dump on all DUTs +| | ... | AND | Show Vpp Settings | ${nodes['DUT1']} +| | ... | AND | Show Vpp Settings | ${nodes['DUT2']} +| | ... | AND | Stop and Clear QEMU | ${dut1_node} | ${vm_node} +| | ... | AND | Check VPP PID in Teardown +| | ... +| | Given Path for 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in 3-node path are up +| | And IP addresses are set on interfaces +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip4} | ${prefix4} +| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip4} | ${prefix4} +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_dut1_ip4} | ${prefix4} +| | ... | ${dut2_node} | ${dut2_to_tg} | ${dut2_to_tg_ip4} | ${prefix4} +| | And Add Arp On Dut | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip4} +| | ... | ${tg_to_dut1_mac} +| | And Add Arp On Dut | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip4} +| | ... | ${tg_to_dut2_mac} +| | And Add Arp On Dut | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip4} +| | ... | ${dut2_to_dut1_mac} +| | And Add Arp On Dut | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip4} +| | ... | ${dut1_to_dut2_mac} +| | When Set up LISP GPE topology +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE} +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid} +| | ... | ${dut1_to_dut2_ip4_static_adjacency} +| | ... | ${dut2_to_dut1_ip4_static_adjacency} +| | And Setup Qemu DUT1 +| | Then Send Packet And Check Headers +| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4} +| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dst_vhost_mac} +| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} +| | And Send Packet And Check Headers +| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4} +| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} +| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} + +*** Keywords *** +| Setup Qemu DUT1 +| | [Documentation] | Setup Vhosts on DUT1 and setup IP on one of them. Setup\ +| | ... | Qemu and bridge the vhosts. Optionally, you can set fib table ID\ +| | ... | where the vhost2 interface should be assigned to. +| | ... +| | [Arguments] | ${fib_table}=0 +| | ... +| | ${vhost1}= | Vpp Create Vhost User Interface | ${dut1_node} | ${sock1} +| | ${vhost2}= | Vpp Create Vhost User Interface | ${dut1_node} | ${sock2} +| | Set Interface Address | ${dut1_node} | ${vhost2} | ${vhost_ip} | ${prefix4} +| | Assign Interface To Fib Table | ${dut1_node} +| | ... | ${vhost2} | ${fib_table} +| | Set Interface State | ${dut1_node} | ${vhost1} | up +| | Set Interface State | ${dut1_node} | ${vhost2} | up +| | Bridge domain on DUT node is created | ${dut1_node} | ${bid} | learn=${TRUE} +| | Interface is added to bridge domain | ${dut1_node} +| | ... | ${dut1_to_tg} | ${bid} | 0 +| | Interface is added to bridge domain | ${dut1_node} +| | ... | ${vhost1} | ${bid} | 0 +| | ${vhost_mac}= | Get Vhost User Mac By SW Index | ${dut1_node} | ${vhost2} +| | Set test variable | ${dst_vhost_mac} | ${vhost_mac} +| | VM for Vhost L2BD forwarding is setup | ${dut1_node} | ${sock1} | ${sock2} diff --git a/tests/func/lisp/eth2p-ethip4lispgpe-ip4base-func.robot b/tests/func/lisp/eth2p-ethip4lispgpe-ip4base-func.robot new file mode 100644 index 0000000000..29e58ea005 --- /dev/null +++ b/tests/func/lisp/eth2p-ethip4lispgpe-ip4base-func.robot @@ -0,0 +1,109 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Library | resources.libraries.python.topology.Topology +| Library | resources.libraries.python.NodePath +| Library | resources.libraries.python.Trace +| Library | resources.libraries.python.IPUtil +| Library | resources.libraries.python.VPPUtil +| Library | resources.libraries.python.InterfaceUtil +| Library | resources.libraries.python.VhostUser +| Resource | resources/libraries/robot/traffic.robot +| Resource | resources/libraries/robot/default.robot +| Resource | resources/libraries/robot/interfaces.robot +| Resource | resources/libraries/robot/testing_path.robot +| Resource | resources/libraries/robot/ipv4.robot +| Resource | resources/libraries/robot/vrf.robot +| Resource | resources/libraries/robot/qemu.robot +| Resource | resources/libraries/robot/bridge_domain.robot +| Resource | resources/libraries/robot/lisp/lispgpe.robot +# Import configuration and test data: +| Variables | resources/test_data/lisp/ipv4_lispgpe_ipv4/ipv4_lispgpe_ipv4.py +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | LISP +| ... +| Test Setup | Func Test Setup +| Test Teardown | Run Keywords | Show Packet Trace on All DUTs | ${nodes} +| ... | AND | Show vpp trace dump on all DUTs +| ... | AND | Show Vpp Settings | ${nodes['DUT1']} +| ... | AND | Show Vpp Settings | ${nodes['DUT2']} +| ... | AND | Check VPP PID in Teardown +| ... +| Documentation | *ip4-lispgpe-ip4 encapsulation test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-LISP-IPv4-ICMPv4 on DUT1-DUT2,\ +| ... | Eth-IPv4-ICMPv4 on TG-DUTn for IPv4 routing over LISPoIPv4 tunnel. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\ +| ... | routing and static routes. LISPoIPv4 tunnel is configured between\ +| ... | DUT1 and DUT2. +| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are sent in\ +| ... | both directions by TG on links to DUT1 and DUT2; on receive\ +| ... | TG verifies packets for correctness and their IPv4 src-addr, dst-addr\ +| ... | and MAC addresses. +| ... | *[Ref] Applicable standard specifications:* RFC6830. + +*** Test Cases *** +| TC01: DUT1 and DUT2 route IPv4 bidirectionally over LISP GPE tunnel using physical interfaces +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. +| | ... | [Enc] Eth-IPv4-LISPGPE-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on\ +| | ... | TG-DUTn. +| | ... | [Cfg] Configure IPv4 LISP static adjacencies on DUT1 and DUT2. +| | ... | [Ver] Case: ip4-lispgpe-ip4 - phy2lisp +| | ... | Make TG send ICMPv4 Echo Req between its interfaces across both\ +| | ... | DUTs and LISP GPE tunnel between them; verify IPv4 headers on\ +| | ... | received packets are correct. +| | ... | [Ref] RFC6830. +| | ... +| | Given Path for 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in 3-node path are up +| | And IP addresses are set on interfaces +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip4} | ${prefix4} +| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip4} | ${prefix4} +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_dut1_ip4} | ${prefix4} +| | ... | ${dut2_node} | ${dut2_to_tg} | ${dut2_to_tg_ip4} | ${prefix4} +| | And Add IP Neighbors +| | When Set up LISP GPE topology +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE} +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid} +| | ... | ${dut1_to_dut2_ip4_static_adjacency} +| | ... | ${dut2_to_dut1_ip4_static_adjacency} +| | Then Send Packet And Check Headers +| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4} +| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} +| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} +| | And Send Packet And Check Headers +| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4} +| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} +| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} + +*** Keywords *** +| Add IP Neighbors +| | [Documentation] +| | ... | Add IP neighbors to physical interfaces on DUTs.\ +| | ... | You can specify fib table ID for DUT-TG interfaces. Default is 0. +| | ... +| | [Arguments] | ${fib_id}=0 +| | Add IP Neighbor | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip4} +| | ... | ${tg_to_dut1_mac} | ${fib_id} +| | Add IP Neighbor | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip4} +| | ... | ${tg_to_dut2_mac} | ${fib_id} +| | Add IP Neighbor | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip4} +| | ... | ${dut2_to_dut1_mac} +| | Add IP Neighbor | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip4} +| | ... | ${dut1_to_dut2_mac}
\ No newline at end of file diff --git a/tests/func/lisp/ipv4_lispgpe_ipv4.robot b/tests/func/lisp/eth2p-ethip4lispgpe-ip4basevrf-eth-2vhost-1vm-func.robot index 7caba043da..8241d32664 100644 --- a/tests/func/lisp/ipv4_lispgpe_ipv4.robot +++ b/tests/func/lisp/eth2p-ethip4lispgpe-ip4basevrf-eth-2vhost-1vm-func.robot @@ -56,139 +56,7 @@ | ... | *[Ref] Applicable standard specifications:* RFC6830. *** Test Cases *** -| TC01: DUT1 and DUT2 route IPv4 bidirectionally over LISP GPE tunnel using physical interfaces -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. -| | ... | [Enc] Eth-IPv4-LISPGPE-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on\ -| | ... | TG-DUTn. -| | ... | [Cfg] Configure IPv4 LISP static adjacencies on DUT1 and DUT2. -| | ... | [Ver] Case: ip4-lispgpe-ip4 - phy2lisp -| | ... | Make TG send ICMPv4 Echo Req between its interfaces across both\ -| | ... | DUTs and LISP GPE tunnel between them; verify IPv4 headers on\ -| | ... | received packets are correct. -| | ... | [Ref] RFC6830. -| | ... -| | Given Path for 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in 3-node path are up -| | And IP addresses are set on interfaces -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip4} | ${prefix4} -| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip4} | ${prefix4} -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_dut1_ip4} | ${prefix4} -| | ... | ${dut2_node} | ${dut2_to_tg} | ${dut2_to_tg_ip4} | ${prefix4} -| | And VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip4} -| | And VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip4} -| | And Add Arp On Dut | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip4} -| | ... | ${tg_to_dut2_mac} -| | And Add Arp On Dut | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip4} -| | ... | ${tg_to_dut1_mac} -| | When Set up LISP GPE topology -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE} -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid} -| | ... | ${dut1_to_dut2_ip4_static_adjacency} -| | ... | ${dut2_to_dut1_ip4_static_adjacency} -| | Then Send Packet And Check Headers -| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4} -| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} -| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} -| | And Send Packet And Check Headers -| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4} -| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} -| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} - -| TC02: DUT1 and DUT2 route IPv4 bidirectionally over LISP GPE tunnel using physical interfaces and VRF is enabled -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. -| | ... | [Enc] Eth-IPv4-LISPGPE-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on\ -| | ... | TG-DUTn. -| | ... | [Cfg] Configure IPv4 LISP static adjacencies on DUT1 and DUT2. -| | ... | [Ver] Case: ip4-lispgpe-ip4 - vrf, phy2lisp -| | ... | Make TG send ICMPv4 Echo Req between its interfaces across both\ -| | ... | DUTs and LISP GPE tunnel between them; verify IPv4 headers on\ -| | ... | received packets are correct. -| | ... | [Ref] RFC6830. -| | ... -| | Given Path for 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in 3-node path are up -| | And Assign Interface To Fib Table | ${dut1_node} -| | ... | ${dut1_to_tg} | ${fib_table_1} -| | And Assign Interface To Fib Table | ${dut2_node} -| | ... | ${dut2_to_tg} | ${fib_table_1} -| | Add IP Neighbors | ${fib_table_1} -| | And IP addresses are set on interfaces -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip4} | ${prefix4} -| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip4} | ${prefix4} -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_dut1_ip4} | ${prefix4} -| | ... | ${dut2_node} | ${dut2_to_tg} | ${dut2_to_tg_ip4} | ${prefix4} -| | When Set up LISP GPE topology -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE} -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid} -| | ... | ${dut1_to_dut2_ip4_static_adjacency} -| | ... | ${dut2_to_dut1_ip4_static_adjacency} -| | ... | ${dut1_dut2_vni} | ${fib_table_1} -| | Then Send Packet And Check Headers -| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4} -| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} -| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} -| | And Send Packet And Check Headers -| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4} -| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} -| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} - -| TC03: DUT1 and DUT2 route IPv4 bidirectionally over LISP GPE tunnel using vhost interfaces -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. -| | ... | [Enc] Eth-IPv4-LISPGPE-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on\ -| | ... | TG-DUTn. -| | ... | [Cfg] Configure IPv4 LISP static adjacencies on DUT1 and DUT2. -| | ... | [Ver] Case: ip4-lispgpe-ip4 - main fib, virt2lisp -| | ... | Make TG send ICMPv4 Echo Req between its interfaces across both\ -| | ... | DUTs and LISP GPE tunnel between them; verify IPv4 headers on\ -| | ... | received packets are correct. -| | ... -| | [Teardown] | Run Keywords | Show Packet Trace on All DUTs | ${nodes} -| | ... | AND | Show vpp trace dump on all DUTs -| | ... | AND | Show Vpp Settings | ${nodes['DUT1']} -| | ... | AND | Show Vpp Settings | ${nodes['DUT2']} -| | ... | AND | Stop and Clear QEMU | ${dut1_node} | ${vm_node} -| | ... | AND | Check VPP PID in Teardown -| | ... -| | Given Path for 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in 3-node path are up -| | And IP addresses are set on interfaces -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip4} | ${prefix4} -| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip4} | ${prefix4} -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_dut1_ip4} | ${prefix4} -| | ... | ${dut2_node} | ${dut2_to_tg} | ${dut2_to_tg_ip4} | ${prefix4} -| | And Add Arp On Dut | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip4} -| | ... | ${tg_to_dut1_mac} -| | And Add Arp On Dut | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip4} -| | ... | ${tg_to_dut2_mac} -| | And Add Arp On Dut | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip4} -| | ... | ${dut2_to_dut1_mac} -| | And Add Arp On Dut | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip4} -| | ... | ${dut1_to_dut2_mac} -| | When Set up LISP GPE topology -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE} -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid} -| | ... | ${dut1_to_dut2_ip4_static_adjacency} -| | ... | ${dut2_to_dut1_ip4_static_adjacency} -| | And Setup Qemu DUT1 -| | Then Send Packet And Check Headers -| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4} -| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dst_vhost_mac} -| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} -| | And Send Packet And Check Headers -| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4} -| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} -| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} - -| TC04: DUT1 and DUT2 route IPv4 bidirectionally over LISP GPE tunnel using vhost interfaces and VRF is enabled +| TC01: DUT1 and DUT2 route IPv4 bidirectionally over LISP GPE tunnel using vhost interfaces and VRF is enabled | | [Documentation] | | ... | [Top] TG-DUT1-DUT2-TG. | | ... | [Enc] Eth-IPv4-LISPGPE-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on\ @@ -214,7 +82,7 @@ | | ... | ${dut1_to_tg} | ${fib_table_1} | | And Assign Interface To Fib Table | ${dut2_node} | | ... | ${dut2_to_tg} | ${fib_table_1} -| | Add IP Neighbors | ${fib_table_1} +| | And Add IP Neighbors | ${fib_table_1} | | And IP addresses are set on interfaces | | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip4} | ${prefix4} | | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip4} | ${prefix4} diff --git a/tests/func/lisp/eth2p-ethip4lispgpe-ip4basevrf-func.robot b/tests/func/lisp/eth2p-ethip4lispgpe-ip4basevrf-func.robot new file mode 100644 index 0000000000..0f3b34db2f --- /dev/null +++ b/tests/func/lisp/eth2p-ethip4lispgpe-ip4basevrf-func.robot @@ -0,0 +1,114 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Library | resources.libraries.python.topology.Topology +| Library | resources.libraries.python.NodePath +| Library | resources.libraries.python.Trace +| Library | resources.libraries.python.IPUtil +| Library | resources.libraries.python.VPPUtil +| Library | resources.libraries.python.InterfaceUtil +| Library | resources.libraries.python.VhostUser +| Resource | resources/libraries/robot/traffic.robot +| Resource | resources/libraries/robot/default.robot +| Resource | resources/libraries/robot/interfaces.robot +| Resource | resources/libraries/robot/testing_path.robot +| Resource | resources/libraries/robot/ipv4.robot +| Resource | resources/libraries/robot/vrf.robot +| Resource | resources/libraries/robot/qemu.robot +| Resource | resources/libraries/robot/bridge_domain.robot +| Resource | resources/libraries/robot/lisp/lispgpe.robot +# Import configuration and test data: +| Variables | resources/test_data/lisp/ipv4_lispgpe_ipv4/ipv4_lispgpe_ipv4.py +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | LISP +| ... +| Test Setup | Func Test Setup +| Test Teardown | Run Keywords | Show Packet Trace on All DUTs | ${nodes} +| ... | AND | Show vpp trace dump on all DUTs +| ... | AND | Show Vpp Settings | ${nodes['DUT1']} +| ... | AND | Show Vpp Settings | ${nodes['DUT2']} +| ... | AND | Check VPP PID in Teardown +| ... +| Documentation | *ip4-lispgpe-ip4 encapsulation test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-LISP-IPv4-ICMPv4 on DUT1-DUT2,\ +| ... | Eth-IPv4-ICMPv4 on TG-DUTn for IPv4 routing over LISPoIPv4 tunnel. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\ +| ... | routing and static routes. LISPoIPv4 tunnel is configured between\ +| ... | DUT1 and DUT2. +| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are sent in\ +| ... | both directions by TG on links to DUT1 and DUT2; on receive\ +| ... | TG verifies packets for correctness and their IPv4 src-addr, dst-addr\ +| ... | and MAC addresses. +| ... | *[Ref] Applicable standard specifications:* RFC6830. + +*** Test Cases *** +| TC01: DUT1 and DUT2 route IPv4 bidirectionally over LISP GPE tunnel using physical interfaces and VRF is enabled +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. +| | ... | [Enc] Eth-IPv4-LISPGPE-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on\ +| | ... | TG-DUTn. +| | ... | [Cfg] Configure IPv4 LISP static adjacencies on DUT1 and DUT2. +| | ... | [Ver] Case: ip4-lispgpe-ip4 - vrf, phy2lisp +| | ... | Make TG send ICMPv4 Echo Req between its interfaces across both\ +| | ... | DUTs and LISP GPE tunnel between them; verify IPv4 headers on\ +| | ... | received packets are correct. +| | ... | [Ref] RFC6830. +| | ... +| | Given Path for 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in 3-node path are up +| | And Assign Interface To Fib Table | ${dut1_node} +| | ... | ${dut1_to_tg} | ${fib_table_1} +| | And Assign Interface To Fib Table | ${dut2_node} +| | ... | ${dut2_to_tg} | ${fib_table_1} +| | And Add IP Neighbors | ${fib_table_1} +| | And IP addresses are set on interfaces +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip4} | ${prefix4} +| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip4} | ${prefix4} +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_dut1_ip4} | ${prefix4} +| | ... | ${dut2_node} | ${dut2_to_tg} | ${dut2_to_tg_ip4} | ${prefix4} +| | When Set up LISP GPE topology +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE} +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid} +| | ... | ${dut1_to_dut2_ip4_static_adjacency} +| | ... | ${dut2_to_dut1_ip4_static_adjacency} +| | ... | ${dut1_dut2_vni} | ${fib_table_1} +| | Then Send Packet And Check Headers +| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4} +| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} +| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} +| | And Send Packet And Check Headers +| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4} +| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} +| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} + +*** Keywords *** +| Add IP Neighbors +| | [Documentation] +| | ... | Add IP neighbors to physical interfaces on DUTs.\ +| | ... | You can specify fib table ID for DUT-TG interfaces. Default is 0. +| | ... +| | [Arguments] | ${fib_id}=0 +| | Add IP Neighbor | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip4} +| | ... | ${tg_to_dut1_mac} | ${fib_id} +| | Add IP Neighbor | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip4} +| | ... | ${tg_to_dut2_mac} | ${fib_id} +| | Add IP Neighbor | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip4} +| | ... | ${dut2_to_dut1_mac} +| | Add IP Neighbor | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip4} +| | ... | ${dut1_to_dut2_mac} diff --git a/tests/func/lisp/eth2p-ethip4lispgpe-ip6base-eth-2vhost-1vm-func.robot b/tests/func/lisp/eth2p-ethip4lispgpe-ip6base-eth-2vhost-1vm-func.robot new file mode 100644 index 0000000000..77c0df952e --- /dev/null +++ b/tests/func/lisp/eth2p-ethip4lispgpe-ip6base-eth-2vhost-1vm-func.robot @@ -0,0 +1,119 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/default.robot +| Resource | resources/libraries/robot/testing_path.robot +| Resource | resources/libraries/robot/ipv4.robot +| Resource | resources/libraries/robot/traffic.robot +| Resource | resources/libraries/robot/lisp/lisp_static_adjacency.robot +| Resource | resources/libraries/robot/l2_traffic.robot +| Resource | resources/libraries/robot/lisp/lispgpe.robot +| Resource | resources/libraries/robot/bridge_domain.robot +| Resource | resources/libraries/robot/qemu.robot +| Library | resources.libraries.python.IPUtil +| Library | resources.libraries.python.VhostUser +| Library | resources.libraries.python.Trace +| Library | resources.libraries.python.VPPUtil +# import additional Lisp settings from resource file +| Variables | resources/test_data/lisp/static_adjacency/lisp_static_adjacency.py +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | 3_NODE_DOUBLE_LINK_TOPO +| ... | VM_ENV | HW_ENV +| Test Setup | Func Test Setup +| Test Teardown | Func Test Teardown +| Documentation | *LISP static adjacency test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-LISP-IPv6-ICMPv6 on DUT1-DUT2,\ +| ... | Eth-IPv6-ICMPv6 on TG-DUTn for IPv6 routing over LISPoIPv4 tunnel. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\ +| ... | routing and static routes. LISPoIPv4 tunnel is configured\ +| ... | between DUT1 and DUT2. +| ... | *[Ver] TG verification:* Test ICMPv6 Echo Request packets\ +| ... | are sent in both directions by TG on links to DUT1 and DUT2; on receive\ +| ... | TG verifies packets for correctness and their IPv6 src-addr,\ +| ... | dst-addr and MAC addresses. +| ... | *[Ref] Applicable standard specifications:* RFC6830. + +*** Test Cases *** +| TC01: DUT1 and DUT2 route IPv6 bidirectionally over LISP GPE tunnel using vhost interfaces +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. +| | ... | [Enc] Eth-IPv4-LISPGPE-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on\ +| | ... | TG-DUTn. +| | ... | [Cfg] Configure IPv4 LISP static adjacencies on DUT1 and DUT2. +| | ... | [Ver] Case: ip6-lispgpe-ip4 - main fib, virt2lisp +| | ... | Make TG send ICMPv6 Echo Req between its interfaces across both\ +| | ... | DUTs and LISP GPE tunnel between them; verify IPv6 headers on\ +| | ... | received packets are correct. +| | ... +| | [Teardown] | Run Keywords | Show Packet Trace on All DUTs | ${nodes} +| | ... | AND | Show vpp trace dump on all DUTs +| | ... | AND | Show Vpp Settings | ${nodes['DUT1']} +| | ... | AND | Show Vpp Settings | ${nodes['DUT2']} +| | ... | AND | Stop and Clear QEMU | ${dut1_node} | ${vm_node} +| | ... | AND | Check VPP PID in Teardown +| | ... +| | Given Path for 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in 3-node path are up +| | And IP addresses are set on interfaces +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip6o4} +| | ... | ${dut_prefix6o4} +| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip6o4} | ${tg_prefix6o4} +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_dut1_ip6o4} +| | ... | ${dut_prefix6o4} +| | ... | ${dut2_node} | ${dut2_to_tg} | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} +| | And Add Arp On Dut | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip6o4} +| | ... | ${tg_to_dut1_mac} +| | And Add Arp On Dut | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip6o4} +| | ... | ${tg_to_dut2_mac} +| | And Add Arp On Dut | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip6o4} +| | ... | ${dut2_to_dut1_mac} +| | And Add Arp On Dut | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip6o4} +| | ... | ${dut1_to_dut2_mac} +| | When Set up LISP GPE topology +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE} +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid} +| | ... | ${dut1_ip6o4_static_adjacency} +| | ... | ${dut2_ip6o4_static_adjacency} +| | And Setup Qemu DUT1 +| | Then Send Packet And Check Headers +| | ... | ${tg_node} | ${tg1_ip6o4} | ${tg2_ip6o4} +| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dst_vhost_mac} +| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} +| | And Send Packet And Check Headers +| | ... | ${tg_node} | ${tg2_ip6o4} | ${tg1_ip6o4} +| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} +| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} + +*** Keywords *** +| Setup Qemu DUT1 +| | [Documentation] | Setup Vhosts on DUT1 and setup IP on one of them. Setup\ +| | ... | Qemu and bridge the vhosts. +| | ... +| | ${vhost1}= | Vpp Create Vhost User Interface | ${dut1_node} | ${sock1} +| | ${vhost2}= | Vpp Create Vhost User Interface | ${dut1_node} | ${sock2} +| | Set Interface Address | ${dut1_node} | ${vhost2} | ${vhost_ip} | ${prefix4} +| | Set Interface State | ${dut1_node} | ${vhost1} | up +| | Set Interface State | ${dut1_node} | ${vhost2} | up +| | Bridge domain on DUT node is created | ${dut1_node} | ${bid} | learn=${TRUE} +| | Interface is added to bridge domain | ${dut1_node} +| | ... | ${dut1_to_tg} | ${bid} | 0 +| | Interface is added to bridge domain | ${dut1_node} +| | ... | ${vhost1} | ${bid} | 0 +| | ${vhost_mac}= | Get Vhost User Mac By SW Index | ${dut1_node} | ${vhost2} +| | Set test variable | ${dst_vhost_mac} | ${vhost_mac} +| | VM for Vhost L2BD forwarding is setup | ${dut1_node} | ${sock1} | ${sock2} diff --git a/tests/func/lisp/eth2p-ethip4lispgpe-ip6base-func.robot b/tests/func/lisp/eth2p-ethip4lispgpe-ip6base-func.robot new file mode 100644 index 0000000000..b959ff20d0 --- /dev/null +++ b/tests/func/lisp/eth2p-ethip4lispgpe-ip6base-func.robot @@ -0,0 +1,117 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/default.robot +| Resource | resources/libraries/robot/testing_path.robot +| Resource | resources/libraries/robot/ipv4.robot +| Resource | resources/libraries/robot/traffic.robot +| Resource | resources/libraries/robot/lisp/lisp_static_adjacency.robot +| Resource | resources/libraries/robot/l2_traffic.robot +| Resource | resources/libraries/robot/lisp/lispgpe.robot +| Resource | resources/libraries/robot/bridge_domain.robot +| Resource | resources/libraries/robot/qemu.robot +| Library | resources.libraries.python.IPUtil +| Library | resources.libraries.python.VhostUser +| Library | resources.libraries.python.Trace +| Library | resources.libraries.python.VPPUtil +# import additional Lisp settings from resource file +| Variables | resources/test_data/lisp/static_adjacency/lisp_static_adjacency.py +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | 3_NODE_DOUBLE_LINK_TOPO +| ... | VM_ENV | HW_ENV +| Test Setup | Func Test Setup +| Test Teardown | Func Test Teardown +| Documentation | *LISP static adjacency test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-LISP-IPv6-ICMPv6 on DUT1-DUT2,\ +| ... | Eth-IPv6-ICMPv6 on TG-DUTn for IPv6 routing over LISPoIPv4 tunnel. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\ +| ... | routing and static routes. LISPoIPv4 tunnel is configured\ +| ... | between DUT1 and DUT2. +| ... | *[Ver] TG verification:* Test ICMPv6 Echo Request packets\ +| ... | are sent in both directions by TG on links to DUT1 and DUT2; on receive\ +| ... | TG verifies packets for correctness and their IPv6 src-addr,\ +| ... | dst-addr and MAC addresses. +| ... | *[Ref] Applicable standard specifications:* RFC6830. + +*** Test Cases *** +| TC01: DUT1 and DUT2 route IPv6 bidirectionally over LISPoIPv4 tunnel +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. +| | ... | [Enc] Eth-IPv4-LISP-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on\ +| | ... | TG-DUTn. +| | ... | [Cfg] On DUT1 and DUT2 configure IPv4 LISP static adjacencies. +| | ... | [Ver] Make TG send ICMPv6 Echo Req between its interfaces across both\ +| | ... | DUTs and LISP tunnel between them; verify IPv6 headers on received\ +| | ... | packets are correct. +| | ... | [Cfg2] Reconf LISP. +| | ... | [Ver2] Verify packets are received again via LISP tunnel. +| | ... | [Ref] RFC6830. +| | Given Path for 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in 3-node path are up +| | And IP addresses are set on interfaces +| | ... | ${dut1_node} | ${dut1_to_dut2} +| | ... | ${dut1_to_dut2_ip6o4} | ${dut_prefix6o4} +| | ... | ${dut1_node} | ${dut1_to_tg} +| | ... | ${dut1_to_tg_ip6o4} | ${tg_prefix6o4} +| | ... | ${dut2_node} | ${dut2_to_dut1} +| | ... | ${dut2_to_dut1_ip6o4} | ${dut_prefix6o4} +| | ... | ${dut2_node} | ${dut2_to_tg} +| | ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} +| | And Add IP Neighbors +| | When Set up Lisp topology +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE} +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid} +| | ... | ${dut1_ip6o4_static_adjacency} | ${dut2_ip6o4_static_adjacency} +| | Then Send Packet And Check Headers +| | ... | ${tg_node} | ${tg1_ip6o4} | ${tg2_ip6o4} +| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} +| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} +| | And Send Packet And Check Headers +| | ... | ${tg_node} | ${tg2_ip6o4} | ${tg1_ip6o4} +| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} +| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} +| | When Change Lisp Configuration | ${dut1_node} | ${dut2_node} +| | ... | ${dut1_to_dut2} | ${dut2_to_dut1} | ${dut1_to_dut2_mac} +| | ... | ${dut2_to_dut1_mac} | ${dut1_to_dut2_ip6o4} +| | ... | ${dut2_to_dut1_ip6o4_reconf} | ${dut_prefix6o4} +| | ... | ${dut1_ip6o4_static_adjacency} +| | ... | ${dut1_ip6o4_static_adjacency_reconf} +| | Then Send Packet And Check Headers +| | ... | ${tg_node} | ${tg1_ip6o4} | ${tg2_ip6o4} +| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} +| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} +| | And Send Packet And Check Headers +| | ... | ${tg_node} | ${tg2_ip6o4} | ${tg1_ip6o4} +| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} +| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} + +*** Keywords *** +| Add IP Neighbors +| | [Documentation] +| | ... | Add IP neighbors to physical interfaces on DUTs.\ +| | ... | You can specify fib table ID for DUT-TG interfaces. Default is 0. +| | ... +| | [Arguments] | ${fib_id}=0 +| | Add IP Neighbor | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip6o4} +| | ... | ${tg_to_dut1_mac} | ${fib_id} +| | Add IP Neighbor | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip6o4} +| | ... | ${tg_to_dut2_mac} | ${fib_id} +| | Add IP Neighbor | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip6o4} +| | ... | ${dut2_to_dut1_mac} +| | Add IP Neighbor | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip6o4} +| | ... | ${dut1_to_dut2_mac} diff --git a/tests/func/lisp/eth2p-ethip4lispgpe-ip6basevrf-func.robot b/tests/func/lisp/eth2p-ethip4lispgpe-ip6basevrf-func.robot new file mode 100644 index 0000000000..41d5dcf8cb --- /dev/null +++ b/tests/func/lisp/eth2p-ethip4lispgpe-ip6basevrf-func.robot @@ -0,0 +1,113 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/default.robot +| Resource | resources/libraries/robot/testing_path.robot +| Resource | resources/libraries/robot/ipv4.robot +| Resource | resources/libraries/robot/traffic.robot +| Resource | resources/libraries/robot/lisp/lisp_static_adjacency.robot +| Resource | resources/libraries/robot/l2_traffic.robot +| Resource | resources/libraries/robot/lisp/lispgpe.robot +| Resource | resources/libraries/robot/bridge_domain.robot +| Resource | resources/libraries/robot/qemu.robot +| Library | resources.libraries.python.IPUtil +| Library | resources.libraries.python.VhostUser +| Library | resources.libraries.python.Trace +| Library | resources.libraries.python.VPPUtil +# import additional Lisp settings from resource file +| Variables | resources/test_data/lisp/static_adjacency/lisp_static_adjacency.py +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | 3_NODE_DOUBLE_LINK_TOPO +| ... | VM_ENV | HW_ENV +| Test Setup | Func Test Setup +| Test Teardown | Func Test Teardown +| Documentation | *LISP static adjacency test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-LISP-IPv6-ICMPv6 on DUT1-DUT2,\ +| ... | Eth-IPv6-ICMPv6 on TG-DUTn for IPv6 routing over LISPoIPv4 tunnel. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\ +| ... | routing and static routes. LISPoIPv4 tunnel is configured\ +| ... | between DUT1 and DUT2. +| ... | *[Ver] TG verification:* Test ICMPv6 Echo Request packets\ +| ... | are sent in both directions by TG on links to DUT1 and DUT2; on receive\ +| ... | TG verifies packets for correctness and their IPv6 src-addr,\ +| ... | dst-addr and MAC addresses. +| ... | *[Ref] Applicable standard specifications:* RFC6830. + +*** Test Cases *** +| TC01: DUT1 and DUT2 route IPv6 bidirectionally over LISP GPE tunnel using physical interfaces and VRF is enabled +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. +| | ... | [Enc] Eth-IPv4-LISPGPE-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on\ +| | ... | TG-DUTn. +| | ... | [Cfg] Configure IPv4 LISP static adjacencies on DUT1 and DUT2. +| | ... | [Ver] Case: ip6-lispgpe-ip4 - vrf, phy2lisp +| | ... | Make TG send ICMPv4 Echo Req between its interfaces across both\ +| | ... | DUTs and LISP GPE tunnel between them; verify IPv6 headers on\ +| | ... | received packets are correct. +| | ... | [Ref] RFC6830. +| | ... +| | [Teardown] | Run Keywords | Show Packet Trace on All DUTs | ${nodes} +| | ... | AND | Show vpp trace dump on all DUTs +| | ... | AND | Show Vpp Settings | ${nodes['DUT1']} +| | ... | AND | Show Vpp Settings | ${nodes['DUT2']} +| | ... | AND | Check VPP PID in Teardown +| | ... +| | Given Path for 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in 3-node path are up +| | And Assign Interface To Fib Table | ${dut1_node} +| | ... | ${dut1_to_tg} | ${fib_table_1} | ip6=${TRUE} +| | And Assign Interface To Fib Table | ${dut2_node} +| | ... | ${dut2_to_tg} | ${fib_table_1} | ip6=${TRUE} +| | And Add IP Neighbors | ${fib_table_1} +| | And IP addresses are set on interfaces +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip6o4} +| | ... | ${dut_prefix6o4} +| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip6o4} | ${tg_prefix6o4} +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_dut1_ip6o4} +| | ... | ${dut_prefix6o4} +| | ... | ${dut2_node} | ${dut2_to_tg} | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} +| | When Set up LISP GPE topology +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE} +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid} +| | ... | ${dut1_ip6o4_static_adjacency} +| | ... | ${dut2_ip6o4_static_adjacency} +| | ... | ${dut1_dut2_vni} | ${fib_table_1} +| | Then Send Packet And Check Headers +| | ... | ${tg_node} | ${tg1_ip6o4} | ${tg2_ip6o4} +| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} +| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} +| | And Send Packet And Check Headers +| | ... | ${tg_node} | ${tg2_ip6o4} | ${tg1_ip6o4} +| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} +| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} + +*** Keywords *** +| Add IP Neighbors +| | [Documentation] +| | ... | Add IP neighbors to physical interfaces on DUTs.\ +| | ... | You can specify fib table ID for DUT-TG interfaces. Default is 0. +| | ... +| | [Arguments] | ${fib_id}=0 +| | Add IP Neighbor | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip6o4} +| | ... | ${tg_to_dut1_mac} | ${fib_id} +| | Add IP Neighbor | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip6o4} +| | ... | ${tg_to_dut2_mac} | ${fib_id} +| | Add IP Neighbor | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip6o4} +| | ... | ${dut2_to_dut1_mac} +| | Add IP Neighbor | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip6o4} +| | ... | ${dut1_to_dut2_mac} diff --git a/tests/func/lisp/ipsec_ipv4_lispgpe_ipv6.robot b/tests/func/lisp/eth2p-ethip6ipsectptlispgpe-ip4base-eth-2vhost-1vm-func.robot index 71ff7d721b..ae846ad972 100644 --- a/tests/func/lisp/ipsec_ipv4_lispgpe_ipv6.robot +++ b/tests/func/lisp/eth2p-ethip6ipsectptlispgpe-ip4base-eth-2vhost-1vm-func.robot @@ -38,91 +38,27 @@ | Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | LISP | ... | Test Setup | Func Test Setup -| Test Teardown | Func Test Teardown +| Test Teardown | Run Keywords | Show Packet Trace on All DUTs | ${nodes} +| ... | AND | Show vpp trace dump on all DUTs +| ... | AND | Show Vpp Settings | ${nodes['DUT1']} +| ... | AND | Show Vpp Settings | ${nodes['DUT2']} +| ... | AND | Check VPP PID in Teardown | ... | Documentation | *IPv6 - ip4-ipsec-lispgpe-ip6 - main fib, virt2lisp, phy2lisp* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:*Eth-IPv6-LISPGPE-IPSec-IPv4-ICMP,\ +| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-LISPGPE-IPSec-IPv4-ICMP,\ | ... | Eth-IPv6-IPSec-LISPGPE-IPv4-ICMP | ... | *[Cfg] DUT configuration:* Each DUT is configured with LISP and IPsec.\ -| ... | IPsec is in transport mode. Tests cases are for IPsec configured both\ +| ... | IPsec is in transport mode. Test cases are for IPsec configured both\ | ... | on RLOC interface or lisp_gpe0 interface. | ... | *[Ver] TG verification:* Packet is send from TG(if1) across the DUT1 to\ | ... | DUT2 where it is forwarded to TG(if2). | ... | *[Ref] Applicable standard specifications:* RFC6830, RFC4303. *** Test Cases *** -| TC01: DUT1 and DUT2 route IPv4 bidirectionally over LISP GPE tunnel using IPsec (transport) on RLOC Int. -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. -| | ... | [Enc] Eth-IPv6-LISPGPE-IPSec-IPv4-ICMP on DUT1-DUT2, Eth-IPv4-ICMP\ -| | ... | on TG-DUTn. -| | ... | [Cfg] Configure IPv6 LISP static adjacencies on DUT1 and DUT2 with\ -| | ... | IPsec in between DUTS. -| | ... | [Ver] Make TG send ICMPv6 Echo Req between its interfaces across\ -| | ... | both DUTs and LISP GPE tunnel between them; verify IPv4 headers on\ -| | ... | received packets are correct. -| | ... | [Ref] RFC6830, RFC4303. -| | ... -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Setup Topology And Lisp -| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg} -| | When VPP Setup IPsec Manual Keyed Connection -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${encr_alg} | ${encr_key} -| | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi} -| | ... | ${dut1_to_dut2_ip6} | ${dut2_to_dut1_ip6} -| | And VPP Setup IPsec Manual Keyed Connection -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${encr_alg} | ${encr_key} -| | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi} -| | ... | ${dut2_to_dut1_ip6} | ${dut1_to_dut2_ip6} -| | Then Send Packet And Check Headers -| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4} -| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} -| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} -| | And Send Packet And Check Headers -| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4} -| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} -| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} - -| TC02: DUT1 and DUT2 route IPv4 bidirectionally over LISP GPE tunnel using IPsec (transport) on lisp_gpe0 Int. -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. -| | ... | [Enc] Eth-IPv6-IPSec-LISPGPE-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMP\ -| | ... | on TG-DUTn. -| | ... | [Cfg] Configure IPv6 LISP static adjacencies on DUT1 and DUT2 with\ -| | ... | IPsec in between DUTS. -| | ... | [Ver] Make TG send ICMPv6 Echo Req between its interfaces across\ -| | ... | both DUTs and LISP GPE tunnel between them; verify IPv4 headers on\ -| | ... | received packets are correct. -| | ... | [Ref] RFC6830, RFC4303. -| | ... -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Setup Topology And Lisp -| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg} -| | ${lisp_if_idx}= | resources.libraries.python.InterfaceUtil.get sw if index -| | ... | ${dut1_node} | ${lisp_gpe_int} -| | When VPP Setup IPsec Manual Keyed Connection -| | ... | ${dut1_node} | ${lisp_if_idx} | ${encr_alg} | ${encr_key} -| | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi} -| | ... | ${dut1_to_dut2_ip6} | ${dut2_to_dut1_ip6} -| | And VPP Setup IPsec Manual Keyed Connection -| | ... | ${dut2_node} | ${lisp_if_idx} | ${encr_alg} | ${encr_key} -| | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi} -| | ... | ${dut2_to_dut1_ip6} | ${dut1_to_dut2_ip6} -| | Then Send Packet And Check Headers -| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4} -| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} -| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} -| | And Send Packet And Check Headers -| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4} -| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} -| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} - -| TC03: DUT1 and DUT2 route IPv4 over Vhost to LISP GPE tunnel using IPsec (transport) on RLOC Int. +| TC01: DUT1 and DUT2 route IPv4 over Vhost to LISP GPE tunnel using IPsec (transport) on RLOC Int. | | [Documentation] | | ... | [Top] TG-DUT1-DUT2-TG. | | ... | [Enc] Eth-IPv6-LISPGPE-IPSec-IPv4-ICMP on DUT1-DUT2, Eth-IPv4-ICMP\ @@ -164,7 +100,7 @@ | | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} | | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} -| TC04: DUT1 and DUT2 route IPv4 over Vhost to LISP GPE tunnel using IPsec (transport) on lisp_gpe0 Int. +| TC02: DUT1 and DUT2 route IPv4 over Vhost to LISP GPE tunnel using IPsec (transport) on lisp_gpe0 Int. | | [Documentation] | | ... | [Top] TG-DUT1-DUT2-TG. | | ... | [Enc] Eth-IPv6-IPSec-LISPGPE-IPv6-ICMPv6 on DUT1-DUT2,\ diff --git a/tests/func/lisp/eth2p-ethip6ipsectptlispgpe-ip4base-func.robot b/tests/func/lisp/eth2p-ethip6ipsectptlispgpe-ip4base-func.robot new file mode 100644 index 0000000000..3af4899e54 --- /dev/null +++ b/tests/func/lisp/eth2p-ethip6ipsectptlispgpe-ip4base-func.robot @@ -0,0 +1,155 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Library | resources.libraries.python.topology.Topology +| Library | resources.libraries.python.NodePath +| Library | resources.libraries.python.Trace +| Library | resources.libraries.python.IPUtil +| Library | resources.libraries.python.L2Util +| Library | resources.libraries.python.LispUtil +| Library | resources.libraries.python.IPsecUtil +| Library | resources.libraries.python.VatJsonUtil +| Library | resources.libraries.python.IPv6Setup +| Library | resources.libraries.python.VhostUser +| Library | resources.libraries.python.QemuUtils +| Library | String +| Resource | resources/libraries/robot/traffic.robot +| Resource | resources/libraries/robot/default.robot +| Resource | resources/libraries/robot/interfaces.robot +| Resource | resources/libraries/robot/testing_path.robot +| Resource | resources/libraries/robot/ipv6.robot +| Resource | resources/libraries/robot/ipsec.robot +| Resource | resources/libraries/robot/qemu.robot +| Resource | resources/libraries/robot/lisp/lispgpe.robot +| Resource | resources/libraries/robot/bridge_domain.robot +# Import configuration and test data: +| Variables | resources/test_data/lisp/ipv4_lispgpe_ipv6/ipv4_lispgpe_ipsec_ipv6.py +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | LISP +| ... +| Test Setup | Func Test Setup +| Test Teardown | Func Test Teardown +| ... +| Documentation | *IPv6 - ip4-ipsec-lispgpe-ip6 - main fib, virt2lisp, phy2lisp* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-LISPGPE-IPSec-IPv4-ICMP,\ +| ... | Eth-IPv6-IPSec-LISPGPE-IPv4-ICMP +| ... | *[Cfg] DUT configuration:* Each DUT is configured with LISP and IPsec.\ +| ... | IPsec is in transport mode. Tests cases are for IPsec configured both\ +| ... | on RLOC interface or lisp_gpe0 interface. +| ... | *[Ver] TG verification:* Packet is send from TG(if1) across the DUT1 to\ +| ... | DUT2 where it is forwarded to TG(if2). +| ... | *[Ref] Applicable standard specifications:* RFC6830, RFC4303. + +*** Test Cases *** +| TC01: DUT1 and DUT2 route IPv4 bidirectionally over LISP GPE tunnel using IPsec (transport) on RLOC Int. +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. +| | ... | [Enc] Eth-IPv6-LISPGPE-IPSec-IPv4-ICMP on DUT1-DUT2, Eth-IPv4-ICMP\ +| | ... | on TG-DUTn. +| | ... | [Cfg] Configure IPv6 LISP static adjacencies on DUT1 and DUT2 with\ +| | ... | IPsec in between DUTS. +| | ... | [Ver] Make TG send ICMPv6 Echo Req between its interfaces across\ +| | ... | both DUTs and LISP GPE tunnel between them; verify IPv4 headers on\ +| | ... | received packets are correct. +| | ... | [Ref] RFC6830, RFC4303. +| | ... +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Setup Topology And Lisp +| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg} +| | When VPP Setup IPsec Manual Keyed Connection +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${encr_alg} | ${encr_key} +| | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi} +| | ... | ${dut1_to_dut2_ip6} | ${dut2_to_dut1_ip6} +| | And VPP Setup IPsec Manual Keyed Connection +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${encr_alg} | ${encr_key} +| | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi} +| | ... | ${dut2_to_dut1_ip6} | ${dut1_to_dut2_ip6} +| | Then Send Packet And Check Headers +| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4} +| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} +| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} +| | And Send Packet And Check Headers +| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4} +| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} +| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} + +| TC02: DUT1 and DUT2 route IPv4 bidirectionally over LISP GPE tunnel using IPsec (transport) on lisp_gpe0 Int. +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. +| | ... | [Enc] Eth-IPv6-IPSec-LISPGPE-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMP\ +| | ... | on TG-DUTn. +| | ... | [Cfg] Configure IPv6 LISP static adjacencies on DUT1 and DUT2 with\ +| | ... | IPsec in between DUTS. +| | ... | [Ver] Make TG send ICMPv6 Echo Req between its interfaces across\ +| | ... | both DUTs and LISP GPE tunnel between them; verify IPv4 headers on\ +| | ... | received packets are correct. +| | ... | [Ref] RFC6830, RFC4303. +| | ... +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Setup Topology And Lisp +| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg} +| | ${lisp_if_idx}= | resources.libraries.python.InterfaceUtil.get sw if index +| | ... | ${dut1_node} | ${lisp_gpe_int} +| | When VPP Setup IPsec Manual Keyed Connection +| | ... | ${dut1_node} | ${lisp_if_idx} | ${encr_alg} | ${encr_key} +| | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi} +| | ... | ${dut1_to_dut2_ip6} | ${dut2_to_dut1_ip6} +| | And VPP Setup IPsec Manual Keyed Connection +| | ... | ${dut2_node} | ${lisp_if_idx} | ${encr_alg} | ${encr_key} +| | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi} +| | ... | ${dut2_to_dut1_ip6} | ${dut1_to_dut2_ip6} +| | Then Send Packet And Check Headers +| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4} +| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} +| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} +| | And Send Packet And Check Headers +| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4} +| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} +| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} + +*** Keywords *** +| Setup Topology And Lisp +| | [Documentation] | Setup IPs and neighbors for interfaces on DUT1 and DUT2\ +| | ... | and then setup LISP. +| | Path for 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | Interfaces in 3-node path are up +| | Vpp Set If IPv6 Addr | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip6} +| | ... | ${prefix6} +| | Vpp Set If IPv6 Addr | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip6} +| | ... | ${prefix6} +| | Vpp Set If IPv6 Addr | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip4} +| | ... | ${prefix4} +| | Vpp Set If IPv6 Addr | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_dut1_ip6} +| | ... | ${prefix6} +| | Vpp Set If IPv6 Addr | ${dut2_node} | ${dut2_to_tg} | ${dut2_to_tg_ip4} +| | ... | ${prefix4} +| | Add IP Neighbor | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip4} +| | ... | ${tg_to_dut2_mac} +| | Add IP Neighbor | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip6} +| | ... | ${dut2_to_dut1_mac} +| | Add IP Neighbor | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip6} +| | ... | ${dut1_to_dut2_mac} +| | Add IP Neighbor | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip4} +| | ... | ${tg_to_dut1_mac} +| | Set up LISP GPE topology +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE} +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid} +| | ... | ${dut1_to_dut2_ip_static_adjacency} +| | ... | ${dut2_to_dut1_ip_static_adjacency} diff --git a/tests/func/lisp/ipsec_ipv6_lispgpe_ipv6.robot b/tests/func/lisp/eth2p-ethip6ipsectptlispgpe-ip6base-eth-2vhost-1vm-func.robot index 16af411f70..54091a7c9f 100644 --- a/tests/func/lisp/ipsec_ipv6_lispgpe_ipv6.robot +++ b/tests/func/lisp/eth2p-ethip6ipsectptlispgpe-ip6base-eth-2vhost-1vm-func.robot @@ -47,106 +47,27 @@ | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:*Eth-IPv6-IPSec-LISPGPE-IPv6-ICMPv6,\ +| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-IPSec-LISPGPE-IPv6-ICMPv6,\ | ... | *[Cfg] DUT configuration:* Each DUT is configured with LISP and IPsec.\ | ... | IPsec is in transport mode. Tests cases are for IPsec configured both\ | ... | on RLOC interface or lisp_gpe0 interface. | ... | *[Ver] TG verification:* Packet is send from TG(if1) across the DUT1\ -| ... | to DUT2 where it is forwarded to TG(if2). +| ... | via VM to DUT2 where it is forwarded to TG(if2). | ... | *[Ref] Applicable standard specifications:* RFC6830, RFC4303. *** Variables *** | ${dut2_spi}= | ${1000} | ${dut1_spi}= | ${1001} + | ${ESP_PROTO}= | ${50} + | ${sock1}= | /tmp/sock1 | ${sock2}= | /tmp/sock2 + | ${bid}= | 10 *** Test Cases *** -| TC01: DUT1 and DUT2 route IPv6 bidirectionally over LISP GPE tunnel using IPsec (transport) on RLOC Int. -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. -| | ... | [Enc] Eth-IPv6-IPSec-LISPGPE-IPv6-ICMPv6 on DUT1-DUT2,\ -| | ... | Eth-IPv6-ICMPv6 on TG-DUTn. -| | ... | [Cfg] Configure IPv6 LISP static adjacencies on DUT1 and DUT2 with\ -| | ... | IPsec in between DUTS. -| | ... | [Ver] Case: ip6-lispgpe-ipsec-ip6 - main fib, phys2lisp\ -| | ... | Make TG send ICMPv6 Echo Req between its interfaces across\ -| | ... | both DUTs and LISP GPE tunnel between them; verify IPv6 headers on\ -| | ... | received packets are correct. -| | ... | [Ref] RFC6830, RFC4303. -| | ... -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Setup Topology -| | And Set up LISP GPE topology -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE} -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid} -| | ... | ${dut1_to_dut2_ip6_static_adjacency} -| | ... | ${dut2_to_dut1_ip6_static_adjacency} -| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg} -| | When VPP Setup IPsec Manual Keyed Connection -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${encr_alg} | ${encr_key} -| | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi} -| | ... | ${dut1_to_dut2_ip6} | ${dut2_to_dut1_ip6} -| | And VPP Setup IPsec Manual Keyed Connection -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${encr_alg} | ${encr_key} -| | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi} -| | ... | ${dut2_to_dut1_ip6} | ${dut1_to_dut2_ip6} -| | Then Send Packet And Check Headers -| | ... | ${tg_node} | ${tg1_ip6} | ${tg2_ip6} -| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} -| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} -| | And Send Packet And Check Headers -| | ... | ${tg_node} | ${tg2_ip6} | ${tg1_ip6} -| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} -| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} - -| TC02: DUT1 and DUT2 route IPv6 bidirectionally over LISP GPE tunnel using IPsec (transport) lisp_gpe0 Int. -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. -| | ... | [Enc] Eth-IPv6-IPSec-LISPGPE-IPv6-ICMPv6 on DUT1-DUT2,\ -| | ... | Eth-IPv6-ICMPv6 on TG-DUTn. -| | ... | [Cfg] Configure IPv6 LISP static adjacencies on DUT1 and DUT2 with\ -| | ... | IPsec in between DUTS. -| | ... | [Ver] Case: ip6-ipsec-lispgpe-ip6 - main fib, phys2lisp\ -| | ... | Make TG send ICMPv6 Echo Req between its interfaces across\ -| | ... | both DUTs and LISP GPE tunnel between them; verify IPv6 headers on\ -| | ... | received packets are correct. -| | ... | [Ref] RFC6830, RFC4303. -| | ... -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Setup Topology -| | And Set up LISP GPE topology -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE} -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid} -| | ... | ${dut1_to_dut2_ip6_static_adjacency} -| | ... | ${dut2_to_dut1_ip6_static_adjacency} -| | ${lisp_if_idx}= | resources.libraries.python.InterfaceUtil.get sw if index -| | ... | ${dut1_node} | lisp_gpe0 -| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg} -| | When VPP Setup IPsec Manual Keyed Connection -| | ... | ${dut1_node} | ${lisp_if_idx} | ${encr_alg} | ${encr_key} -| | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi} | ${tg1_ip6} -| | ... | ${tg2_ip6} -| | And VPP Setup IPsec Manual Keyed Connection -| | ... | ${dut2_node} | ${lisp_if_idx} | ${encr_alg} | ${encr_key} -| | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi} | ${tg2_ip6} -| | ... | ${tg1_ip6} -| | Then Send Packet And Check Headers -| | ... | ${tg_node} | ${tg1_ip6} | ${tg2_ip6} -| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} -| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} -| | And Send Packet And Check Headers -| | ... | ${tg_node} | ${tg2_ip6} | ${tg1_ip6} -| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} -| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} - -| TC03: DUT1 and DUT2 route IPv6 over Vhost to LISP GPE tunnel using IPsec (transport) on RLOC Int. +| TC01: DUT1 and DUT2 route IPv6 over Vhost to LISP GPE tunnel using IPsec (transport) on RLOC Int. | | [Documentation] | | ... | [Top] TG-DUT1-DUT2-TG. | | ... | [Enc] Eth-IPv6-IPSec-LISPGPE-IPv6-ICMP on DUT1-DUT2, Eth-IPv6-ICMP\ @@ -195,7 +116,7 @@ | | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} | | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} -| TC04: DUT1 and DUT2 route IPv6 over Vhost to LISP GPE tunnel using IPsec (transport) on lisp_gpe0 Int. +| TC02: DUT1 and DUT2 route IPv6 over Vhost to LISP GPE tunnel using IPsec (transport) on lisp_gpe0 Int. | | [Documentation] | | ... | [Top] TG-DUT1-DUT2-TG. | | ... | [Enc] Eth-IPv6-IPSec-LISPGPE-IPv6-ICMPv6 on DUT1-DUT2,\ diff --git a/tests/func/lisp/eth2p-ethip6ipsectptlispgpe-ip6base-func.robot b/tests/func/lisp/eth2p-ethip6ipsectptlispgpe-ip6base-func.robot new file mode 100644 index 0000000000..24860d1e86 --- /dev/null +++ b/tests/func/lisp/eth2p-ethip6ipsectptlispgpe-ip6base-func.robot @@ -0,0 +1,171 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Library | resources.libraries.python.topology.Topology +| Library | resources.libraries.python.NodePath +| Library | resources.libraries.python.Trace +| Library | resources.libraries.python.IPUtil +| Library | resources.libraries.python.L2Util +| Library | resources.libraries.python.LispUtil +| Library | resources.libraries.python.VPPUtil +| Library | resources.libraries.python.IPsecUtil +| Library | resources.libraries.python.VatJsonUtil +| Library | resources.libraries.python.IPv6Setup +| Library | resources.libraries.python.VhostUser +| Library | resources.libraries.python.QemuUtils +| Library | String +| Resource | resources/libraries/robot/traffic.robot +| Resource | resources/libraries/robot/default.robot +| Resource | resources/libraries/robot/interfaces.robot +| Resource | resources/libraries/robot/testing_path.robot +| Resource | resources/libraries/robot/ipv6.robot +| Resource | resources/libraries/robot/ipsec.robot +| Resource | resources/libraries/robot/qemu.robot +| Resource | resources/libraries/robot/lisp/lispgpe.robot +| Resource | resources/libraries/robot/bridge_domain.robot +# Import configuration and test data: +| Variables | resources/test_data/lisp/ipv6_lispgpe_ipv6/ipv6_lispgpe_ipsec_ipv6.py +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | LISP +| ... +| Test Setup | Run Keywords | Func Test Setup +| ... | AND | Vpp All Ra Suppress Link Layer | ${nodes} +| Test Teardown | Func Test Teardown +| ... +| Documentation | *IPv6 - ip6-ipsec-lispgpe-ip6 - main fib, +| ... | vrf (gpe_vni-to-vrf), phy2lisp, virt2lisp* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-IPSec-LISPGPE-IPv6-ICMPv6,\ +| ... | *[Cfg] DUT configuration:* Each DUT is configured with LISP and IPsec.\ +| ... | IPsec is in transport mode. Tests cases are for IPsec configured both\ +| ... | on RLOC interface or lisp_gpe0 interface. +| ... | *[Ver] TG verification:* Packet is send from TG(if1) across the DUT1\ +| ... | to DUT2 where it is forwarded to TG(if2). +| ... | *[Ref] Applicable standard specifications:* RFC6830, RFC4303. + +*** Variables *** +| ${dut2_spi}= | ${1000} +| ${dut1_spi}= | ${1001} + +| ${ESP_PROTO}= | ${50} + +| ${bid}= | 10 + +*** Test Cases *** +| TC01: DUT1 and DUT2 route IPv6 bidirectionally over LISP GPE tunnel using IPsec (transport) on RLOC Int. +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. +| | ... | [Enc] Eth-IPv6-IPSec-LISPGPE-IPv6-ICMPv6 on DUT1-DUT2,\ +| | ... | Eth-IPv6-ICMPv6 on TG-DUTn. +| | ... | [Cfg] Configure IPv6 LISP static adjacencies on DUT1 and DUT2 with\ +| | ... | IPsec in between DUTS. +| | ... | [Ver] Case: ip6-lispgpe-ipsec-ip6 - main fib, phys2lisp\ +| | ... | Make TG send ICMPv6 Echo Req between its interfaces across\ +| | ... | both DUTs and LISP GPE tunnel between them; verify IPv6 headers on\ +| | ... | received packets are correct. +| | ... | [Ref] RFC6830, RFC4303. +| | ... +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Setup Topology +| | And Set up LISP GPE topology +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE} +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid} +| | ... | ${dut1_to_dut2_ip6_static_adjacency} +| | ... | ${dut2_to_dut1_ip6_static_adjacency} +| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg} +| | When VPP Setup IPsec Manual Keyed Connection +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${encr_alg} | ${encr_key} +| | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi} +| | ... | ${dut1_to_dut2_ip6} | ${dut2_to_dut1_ip6} +| | And VPP Setup IPsec Manual Keyed Connection +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${encr_alg} | ${encr_key} +| | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi} +| | ... | ${dut2_to_dut1_ip6} | ${dut1_to_dut2_ip6} +| | Then Send Packet And Check Headers +| | ... | ${tg_node} | ${tg1_ip6} | ${tg2_ip6} +| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} +| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} +| | And Send Packet And Check Headers +| | ... | ${tg_node} | ${tg2_ip6} | ${tg1_ip6} +| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} +| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} + +| TC02: DUT1 and DUT2 route IPv6 bidirectionally over LISP GPE tunnel using IPsec (transport) lisp_gpe0 Int. +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. +| | ... | [Enc] Eth-IPv6-IPSec-LISPGPE-IPv6-ICMPv6 on DUT1-DUT2,\ +| | ... | Eth-IPv6-ICMPv6 on TG-DUTn. +| | ... | [Cfg] Configure IPv6 LISP static adjacencies on DUT1 and DUT2 with\ +| | ... | IPsec in between DUTS. +| | ... | [Ver] Case: ip6-ipsec-lispgpe-ip6 - main fib, phys2lisp\ +| | ... | Make TG send ICMPv6 Echo Req between its interfaces across\ +| | ... | both DUTs and LISP GPE tunnel between them; verify IPv6 headers on\ +| | ... | received packets are correct. +| | ... | [Ref] RFC6830, RFC4303. +| | ... +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Setup Topology +| | And Set up LISP GPE topology +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE} +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid} +| | ... | ${dut1_to_dut2_ip6_static_adjacency} +| | ... | ${dut2_to_dut1_ip6_static_adjacency} +| | ${lisp_if_idx}= | resources.libraries.python.InterfaceUtil.get sw if index +| | ... | ${dut1_node} | lisp_gpe0 +| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg} +| | When VPP Setup IPsec Manual Keyed Connection +| | ... | ${dut1_node} | ${lisp_if_idx} | ${encr_alg} | ${encr_key} +| | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi} | ${tg1_ip6} +| | ... | ${tg2_ip6} +| | And VPP Setup IPsec Manual Keyed Connection +| | ... | ${dut2_node} | ${lisp_if_idx} | ${encr_alg} | ${encr_key} +| | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi} | ${tg2_ip6} +| | ... | ${tg1_ip6} +| | Then Send Packet And Check Headers +| | ... | ${tg_node} | ${tg1_ip6} | ${tg2_ip6} +| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} +| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} +| | And Send Packet And Check Headers +| | ... | ${tg_node} | ${tg2_ip6} | ${tg1_ip6} +| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} +| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} + +*** Keywords *** +| Setup Topology +| | Path for 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | Interfaces in 3-node path are up +| | Vpp Set If IPv6 Addr | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip6} +| | ... | ${prefix6} +| | Vpp Set If IPv6 Addr | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip6} +| | ... | ${prefix6} +| | Vpp Set If IPv6 Addr | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip6} +| | ... | ${prefix6} +| | Vpp Set If IPv6 Addr | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_dut1_ip6} +| | ... | ${prefix6} +| | Vpp Set If IPv6 Addr | ${dut2_node} | ${dut2_to_tg} | ${dut2_to_tg_ip6} +| | ... | ${prefix6} +| | Add IP Neighbor | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip6} +| | ... | ${tg_to_dut1_mac} +| | Add IP Neighbor | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip6} +| | ... | ${tg_to_dut2_mac} +| | Add IP Neighbor | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip6} +| | ... | ${dut2_to_dut1_mac} +| | Add IP Neighbor | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip6} +| | ... | ${dut1_to_dut2_mac} diff --git a/tests/func/lisp/l2_lisp_ipv6.robot b/tests/func/lisp/eth2p-ethip6lisp-l2bdbasemaclrn-func.robot index 8f421977f1..8f421977f1 100644 --- a/tests/func/lisp/l2_lisp_ipv6.robot +++ b/tests/func/lisp/eth2p-ethip6lisp-l2bdbasemaclrn-func.robot diff --git a/tests/func/lisp/ipv6_lispgpe_ipv4.robot b/tests/func/lisp/eth2p-ethip6lispgpe-ip4base-func.robot index 5a992787a1..5a992787a1 100644 --- a/tests/func/lisp/ipv6_lispgpe_ipv4.robot +++ b/tests/func/lisp/eth2p-ethip6lispgpe-ip4base-func.robot diff --git a/tests/func/lisp/eth2p-ethip6lispgpe-ip6base-eth-2vhost-1vm-func.robot b/tests/func/lisp/eth2p-ethip6lispgpe-ip6base-eth-2vhost-1vm-func.robot new file mode 100644 index 0000000000..1f860074e8 --- /dev/null +++ b/tests/func/lisp/eth2p-ethip6lispgpe-ip6base-eth-2vhost-1vm-func.robot @@ -0,0 +1,142 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Library | resources.libraries.python.topology.Topology +| Library | resources.libraries.python.NodePath +| Library | resources.libraries.python.Trace +| Library | resources.libraries.python.IPUtil +| Library | resources.libraries.python.IPv6Setup +| Library | resources.libraries.python.VPPUtil +| Resource | resources/libraries/robot/traffic.robot +| Resource | resources/libraries/robot/default.robot +| Resource | resources/libraries/robot/interfaces.robot +| Resource | resources/libraries/robot/testing_path.robot +| Resource | resources/libraries/robot/qemu.robot +| Resource | resources/libraries/robot/bridge_domain.robot +| Resource | resources/libraries/robot/vrf.robot +| Resource | resources/libraries/robot/lisp/lispgpe.robot +# Import configuration and test data: +| Variables | resources/test_data/lisp/ipv6_lispgpe_ipv6/ipv6_lispgpe_ipv6.py +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | LISP +| ... +| Test Setup | Run Keywords | Func Test Setup +| ... | AND | Vpp All Ra Suppress Link Layer | ${nodes} +| Test Teardown | Run Keywords | Show Packet Trace on All DUTs | ${nodes} +| ... | AND | Show vpp trace dump on all DUTs +| ... | AND | Show Vpp Settings | ${nodes['DUT1']} +| ... | AND | Show Vpp Settings | ${nodes['DUT2']} +| ... | AND | Check VPP PID in Teardown +| ... +| Documentation | *ip6-lispgpe-ip6 encapsulation test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-LISP-IPv6-ICMPv6 on DUT1-DUT2,\ +| ... | Eth-IPv6-ICMPv6 on TG-DUTn for IPv6 routing over LISPoIPv6 tunnel. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\ +| ... | routing and static routes. LISPoIPv6 tunnel is configured between\ +| ... | DUT1 and DUT2. +| ... | *[Ver] TG verification:* Test ICMPv6 Echo Request packets are sent in\ +| ... | both directions by TG on links to DUT1 and DUT2; on receive\ +| ... | TG verifies packets for correctness and their IPv6 src-addr, dst-addr\ +| ... | and MAC addresses. +| ... | *[Ref] Applicable standard specifications:* RFC6830. + +*** Test Cases *** +| TC01: DUT1 and DUT2 route IPv6 bidirectionally over LISP GPE tunnel using vhost interfaces +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. +| | ... | [Enc] Eth-IPv6-LISPGPE-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on\ +| | ... | TG-DUTn. +| | ... | [Cfg] Configure IPv6 LISP static adjacencies on DUT1 and DUT2. +| | ... | [Ver] Case: ip6-ipsec-lispgpe-ip6 - main fib, virt2lisp +| | ... | Make TG send ICMPv6 Echo Req between its interfaces across both\ +| | ... | DUTs and LISP GPE tunnel between them; verify IPv6 headers on\ +| | ... | received packets are correct. +| | ... +| | [Teardown] | Run Keywords | Show Packet Trace on All DUTs | ${nodes} +| | ... | AND | Show vpp trace dump on all DUTs +| | ... | AND | Show Vpp Settings | ${nodes['DUT1']} +| | ... | AND | Show Vpp Settings | ${nodes['DUT2']} +| | ... | AND | Stop and Clear QEMU | ${dut1_node} | ${vm_node} +| | ... | AND | Check VPP PID in Teardown +| | ... +| | Given Path for 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in 3-node path are up +| | And Vpp Set If IPv6 Addr +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip6} | ${prefix6} +| | And Vpp Set If IPv6 Addr +| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip6} | ${prefix6} +| | And Vpp Set If IPv6 Addr +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_dut1_ip6} | ${prefix6} +| | And Vpp Set If IPv6 Addr +| | ... | ${dut2_node} | ${dut2_to_tg} | ${dut2_to_tg_ip6} | ${prefix6} +| | And Add IP Neighbors +| | When Set up LISP GPE topology +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE} +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid} +| | ... | ${dut1_to_dut2_ip6_static_adjacency} +| | ... | ${dut2_to_dut1_ip6_static_adjacency} +| | And Setup Qemu DUT1 +| | Then Send Packet And Check Headers +| | ... | ${tg_node} | ${tg1_ip6} | ${tg2_ip6} +| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dst_vhost_mac} +| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} +| | And Send Packet And Check Headers +| | ... | ${tg_node} | ${tg2_ip6} | ${tg1_ip6} +| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} +| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} + +*** Keywords *** +| Setup Qemu DUT1 +| | [Documentation] | Setup Vhosts on DUT1 and setup IP on one of them. Setup\ +| | ... | Qemu and bridge the vhosts. Optionally, you can set fib table ID\ +| | ... | where the vhost2 interface should be assigned to. +| | ... +| | [Arguments] | ${fib_table}=0 +| | ... +| | ${vhost1}= | Vpp Create Vhost User Interface | ${dut1_node} | ${sock1} +| | ${vhost2}= | Vpp Create Vhost User Interface | ${dut1_node} | ${sock2} +| | Vpp Set If IPv6 Addr | ${dut1_node} | ${vhost2} | ${vhost_ip} +| | ... | ${prefix6} +| | Assign Interface To Fib Table | ${dut1_node} +| | ... | ${vhost2} | ${fib_table} | ipv6=${TRUE} +| | Set Interface State | ${dut1_node} | ${vhost1} | up +| | Set Interface State | ${dut1_node} | ${vhost2} | up +| | Bridge domain on DUT node is created | ${dut1_node} | ${bid} | learn=${TRUE} +| | Interface is added to bridge domain | ${dut1_node} +| | ... | ${dut1_to_tg} | ${bid} | 0 +| | Interface is added to bridge domain | ${dut1_node} +| | ... | ${vhost1} | ${bid} | 0 +| | ${vhost_mac}= | Get Vhost User Mac By SW Index | ${dut1_node} | ${vhost2} +| | Set test variable | ${dst_vhost_mac} | ${vhost_mac} +| | VM for Vhost L2BD forwarding is setup | ${dut1_node} | ${sock1} | ${sock2} + +| Add IP Neighbors +| | [Documentation] +| | ... | Add IP neighbors to physical interfaces on DUTs.\ +| | ... | You can specify fib table ID for DUT-TG interfaces. Default is 0. +| | ... +| | [Arguments] | ${fib_id}=0 +| | Add IP Neighbor | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip6} +| | ... | ${tg_to_dut1_mac} | ${fib_id} +| | Add IP Neighbor | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip6} +| | ... | ${tg_to_dut2_mac} | ${fib_id} +| | Add IP Neighbor | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip6} +| | ... | ${dut2_to_dut1_mac} +| | Add IP Neighbor | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip6} +| | ... | ${dut1_to_dut2_mac}
\ No newline at end of file diff --git a/tests/func/lisp/eth2p-ethip6lispgpe-ip6base-func.robot b/tests/func/lisp/eth2p-ethip6lispgpe-ip6base-func.robot new file mode 100644 index 0000000000..d70656f316 --- /dev/null +++ b/tests/func/lisp/eth2p-ethip6lispgpe-ip6base-func.robot @@ -0,0 +1,111 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Library | resources.libraries.python.topology.Topology +| Library | resources.libraries.python.NodePath +| Library | resources.libraries.python.Trace +| Library | resources.libraries.python.IPUtil +| Library | resources.libraries.python.IPv6Setup +| Library | resources.libraries.python.VPPUtil +| Resource | resources/libraries/robot/traffic.robot +| Resource | resources/libraries/robot/default.robot +| Resource | resources/libraries/robot/interfaces.robot +| Resource | resources/libraries/robot/testing_path.robot +| Resource | resources/libraries/robot/qemu.robot +| Resource | resources/libraries/robot/bridge_domain.robot +| Resource | resources/libraries/robot/vrf.robot +| Resource | resources/libraries/robot/lisp/lispgpe.robot +# Import configuration and test data: +| Variables | resources/test_data/lisp/ipv6_lispgpe_ipv6/ipv6_lispgpe_ipv6.py +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | LISP +| ... +| Test Setup | Run Keywords | Func Test Setup +| ... | AND | Vpp All Ra Suppress Link Layer | ${nodes} +| Test Teardown | Run Keywords | Show Packet Trace on All DUTs | ${nodes} +| ... | AND | Show vpp trace dump on all DUTs +| ... | AND | Show Vpp Settings | ${nodes['DUT1']} +| ... | AND | Show Vpp Settings | ${nodes['DUT2']} +| ... | AND | Check VPP PID in Teardown +| ... +| Documentation | *ip6-lispgpe-ip6 encapsulation test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-LISP-IPv6-ICMPv6 on DUT1-DUT2,\ +| ... | Eth-IPv6-ICMPv6 on TG-DUTn for IPv6 routing over LISPoIPv6 tunnel. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\ +| ... | routing and static routes. LISPoIPv6 tunnel is configured between\ +| ... | DUT1 and DUT2. +| ... | *[Ver] TG verification:* Test ICMPv6 Echo Request packets are sent in\ +| ... | both directions by TG on links to DUT1 and DUT2; on receive\ +| ... | TG verifies packets for correctness and their IPv6 src-addr, dst-addr\ +| ... | and MAC addresses. +| ... | *[Ref] Applicable standard specifications:* RFC6830. + +*** Test Cases *** +| TC01: DUT1 and DUT2 route IPv6 bidirectionally over LISP GPE tunnel using physical interfaces +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. +| | ... | [Enc] Eth-IPv6-LISPGPE-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on\ +| | ... | TG-DUTn. +| | ... | [Cfg] Configure IPv6 LISP static adjacencies on DUT1 and DUT2. +| | ... | [Ver] Case: ip6-lispgpe-ip6 - phy2lisp +| | ... | Make TG send ICMPv6 Echo Req between its interfaces across both\ +| | ... | DUTs and LISP GPE tunnel between them; verify IPv6 headers on\ +| | ... | received packets are correct. +| | ... | [Ref] RFC6830. +| | ... +| | Given Path for 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in 3-node path are up +| | And Vpp Set If IPv6 Addr +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip6} | ${prefix6} +| | And Vpp Set If IPv6 Addr +| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip6} | ${prefix6} +| | And Vpp Set If IPv6 Addr +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_dut1_ip6} | ${prefix6} +| | And Vpp Set If IPv6 Addr +| | ... | ${dut2_node} | ${dut2_to_tg} | ${dut2_to_tg_ip6} | ${prefix6} +| | And Add IP Neighbors +| | When Set up LISP GPE topology +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE} +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid} +| | ... | ${dut1_to_dut2_ip6_static_adjacency} +| | ... | ${dut2_to_dut1_ip6_static_adjacency} +| | Then Send Packet And Check Headers +| | ... | ${tg_node} | ${tg1_ip6} | ${tg2_ip6} +| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} +| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} +| | And Send Packet And Check Headers +| | ... | ${tg_node} | ${tg2_ip6} | ${tg1_ip6} +| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} +| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} + +*** Keywords *** +| Add IP Neighbors +| | [Documentation] +| | ... | Add IP neighbors to physical interfaces on DUTs.\ +| | ... | You can specify fib table ID for DUT-TG interfaces. Default is 0. +| | ... +| | [Arguments] | ${fib_id}=0 +| | Add IP Neighbor | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip6} +| | ... | ${tg_to_dut1_mac} | ${fib_id} +| | Add IP Neighbor | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip6} +| | ... | ${tg_to_dut2_mac} | ${fib_id} +| | Add IP Neighbor | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip6} +| | ... | ${dut2_to_dut1_mac} +| | Add IP Neighbor | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip6} +| | ... | ${dut1_to_dut2_mac}
\ No newline at end of file diff --git a/tests/func/lisp/eth2p-ethip6lispgpe-ip6basevrf-eth-2vhost-1vm-func.robot b/tests/func/lisp/eth2p-ethip6lispgpe-ip6basevrf-eth-2vhost-1vm-func.robot new file mode 100644 index 0000000000..0f48e4f74f --- /dev/null +++ b/tests/func/lisp/eth2p-ethip6lispgpe-ip6basevrf-eth-2vhost-1vm-func.robot @@ -0,0 +1,148 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Library | resources.libraries.python.topology.Topology +| Library | resources.libraries.python.NodePath +| Library | resources.libraries.python.Trace +| Library | resources.libraries.python.IPUtil +| Library | resources.libraries.python.IPv6Setup +| Library | resources.libraries.python.VPPUtil +| Resource | resources/libraries/robot/traffic.robot +| Resource | resources/libraries/robot/default.robot +| Resource | resources/libraries/robot/interfaces.robot +| Resource | resources/libraries/robot/testing_path.robot +| Resource | resources/libraries/robot/qemu.robot +| Resource | resources/libraries/robot/bridge_domain.robot +| Resource | resources/libraries/robot/vrf.robot +| Resource | resources/libraries/robot/lisp/lispgpe.robot +# Import configuration and test data: +| Variables | resources/test_data/lisp/ipv6_lispgpe_ipv6/ipv6_lispgpe_ipv6.py +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | LISP +| ... +| Test Setup | Run Keywords | Func Test Setup +| ... | AND | Vpp All Ra Suppress Link Layer | ${nodes} +| Test Teardown | Run Keywords | Show Packet Trace on All DUTs | ${nodes} +| ... | AND | Show vpp trace dump on all DUTs +| ... | AND | Show Vpp Settings | ${nodes['DUT1']} +| ... | AND | Show Vpp Settings | ${nodes['DUT2']} +| ... | AND | Check VPP PID in Teardown +| ... +| Documentation | *ip6-lispgpe-ip6 encapsulation test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-LISP-IPv6-ICMPv6 on DUT1-DUT2,\ +| ... | Eth-IPv6-ICMPv6 on TG-DUTn for IPv6 routing over LISPoIPv6 tunnel. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\ +| ... | routing and static routes. LISPoIPv6 tunnel is configured between\ +| ... | DUT1 and DUT2. +| ... | *[Ver] TG verification:* Test ICMPv6 Echo Request packets are sent in\ +| ... | both directions by TG on links to DUT1 and DUT2; on receive\ +| ... | TG verifies packets for correctness and their IPv6 src-addr, dst-addr\ +| ... | and MAC addresses. +| ... | *[Ref] Applicable standard specifications:* RFC6830. + +*** Test Cases *** +| TC01: DUT1 and DUT2 route IPv6 bidirectionally over LISP GPE tunnel using vhost interfaces and VRF is enabled +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. +| | ... | [Enc] Eth-IPv6-LISPGPE-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on\ +| | ... | TG-DUTn. +| | ... | [Cfg] Configure IPv6 LISP static adjacencies on DUT1 and DUT2. +| | ... | [Ver] Case: ip6-lispgpe-ip6 - vrf, virt2lisp +| | ... | Make TG send ICMPv6 Echo Req between its interfaces across both\ +| | ... | DUTs and LISP GPE tunnel between them; verify IPv6 headers on\ +| | ... | received packets are correct. +| | ... | [Ref] RFC6830. +| | ... +| | [Teardown] | Run Keywords | Show Packet Trace on All DUTs | ${nodes} +| | ... | AND | Show vpp trace dump on all DUTs +| | ... | AND | Show Vpp Settings | ${nodes['DUT1']} +| | ... | AND | Show Vpp Settings | ${nodes['DUT2']} +| | ... | AND | Stop and Clear QEMU | ${dut1_node} | ${vm_node} +| | ... | AND | Check VPP PID in Teardown +| | ... +| | Given Path for 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in 3-node path are up +| | And Assign Interface To Fib Table | ${dut1_node} +| | ... | ${dut1_to_tg} | ${fib_table_1} | ipv6=${TRUE} +| | And Assign Interface To Fib Table | ${dut2_node} +| | ... | ${dut2_to_tg} | ${fib_table_1} | ipv6=${TRUE} +| | And Vpp Set If IPv6 Addr +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip6} | ${prefix6} +| | And Vpp Set If IPv6 Addr +| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip6} | ${prefix6} +| | And Vpp Set If IPv6 Addr +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_dut1_ip6} | ${prefix6} +| | And Vpp Set If IPv6 Addr +| | ... | ${dut2_node} | ${dut2_to_tg} | ${dut2_to_tg_ip6} | ${prefix6} +| | And Add IP Neighbors | ${fib_table_1} +| | When Set up LISP GPE topology +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE} +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid} +| | ... | ${dut1_to_dut2_ip6_static_adjacency} +| | ... | ${dut2_to_dut1_ip6_static_adjacency} +| | ... | ${dut1_dut2_vni} | ${fib_table_1} +| | And Setup Qemu DUT1 | ${fib_table_1} +| | Then Send Packet And Check Headers +| | ... | ${tg_node} | ${tg1_ip6} | ${tg2_ip6} +| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dst_vhost_mac} +| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} +| | And Send Packet And Check Headers +| | ... | ${tg_node} | ${tg2_ip6} | ${tg1_ip6} +| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} +| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} + +*** Keywords *** +| Setup Qemu DUT1 +| | [Documentation] | Setup Vhosts on DUT1 and setup IP on one of them. Setup\ +| | ... | Qemu and bridge the vhosts. Optionally, you can set fib table ID\ +| | ... | where the vhost2 interface should be assigned to. +| | ... +| | [Arguments] | ${fib_table}=0 +| | ... +| | ${vhost1}= | Vpp Create Vhost User Interface | ${dut1_node} | ${sock1} +| | ${vhost2}= | Vpp Create Vhost User Interface | ${dut1_node} | ${sock2} +| | Vpp Set If IPv6 Addr | ${dut1_node} | ${vhost2} | ${vhost_ip} +| | ... | ${prefix6} +| | Assign Interface To Fib Table | ${dut1_node} +| | ... | ${vhost2} | ${fib_table} | ipv6=${TRUE} +| | Set Interface State | ${dut1_node} | ${vhost1} | up +| | Set Interface State | ${dut1_node} | ${vhost2} | up +| | Bridge domain on DUT node is created | ${dut1_node} | ${bid} | learn=${TRUE} +| | Interface is added to bridge domain | ${dut1_node} +| | ... | ${dut1_to_tg} | ${bid} | 0 +| | Interface is added to bridge domain | ${dut1_node} +| | ... | ${vhost1} | ${bid} | 0 +| | ${vhost_mac}= | Get Vhost User Mac By SW Index | ${dut1_node} | ${vhost2} +| | Set test variable | ${dst_vhost_mac} | ${vhost_mac} +| | VM for Vhost L2BD forwarding is setup | ${dut1_node} | ${sock1} | ${sock2} + +| Add IP Neighbors +| | [Documentation] +| | ... | Add IP neighbors to physical interfaces on DUTs.\ +| | ... | You can specify fib table ID for DUT-TG interfaces. Default is 0. +| | ... +| | [Arguments] | ${fib_id}=0 +| | Add IP Neighbor | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip6} +| | ... | ${tg_to_dut1_mac} | ${fib_id} +| | Add IP Neighbor | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip6} +| | ... | ${tg_to_dut2_mac} | ${fib_id} +| | Add IP Neighbor | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip6} +| | ... | ${dut2_to_dut1_mac} +| | Add IP Neighbor | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip6} +| | ... | ${dut1_to_dut2_mac}
\ No newline at end of file diff --git a/tests/func/lisp/eth2p-ethip6lispgpe-ip6basevrf-func.robot b/tests/func/lisp/eth2p-ethip6lispgpe-ip6basevrf-func.robot new file mode 100644 index 0000000000..5517e62012 --- /dev/null +++ b/tests/func/lisp/eth2p-ethip6lispgpe-ip6basevrf-func.robot @@ -0,0 +1,116 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Library | resources.libraries.python.topology.Topology +| Library | resources.libraries.python.NodePath +| Library | resources.libraries.python.Trace +| Library | resources.libraries.python.IPUtil +| Library | resources.libraries.python.IPv6Setup +| Library | resources.libraries.python.VPPUtil +| Resource | resources/libraries/robot/traffic.robot +| Resource | resources/libraries/robot/default.robot +| Resource | resources/libraries/robot/interfaces.robot +| Resource | resources/libraries/robot/testing_path.robot +| Resource | resources/libraries/robot/qemu.robot +| Resource | resources/libraries/robot/bridge_domain.robot +| Resource | resources/libraries/robot/vrf.robot +| Resource | resources/libraries/robot/lisp/lispgpe.robot +# Import configuration and test data: +| Variables | resources/test_data/lisp/ipv6_lispgpe_ipv6/ipv6_lispgpe_ipv6.py +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | LISP +| ... +| Test Setup | Run Keywords | Func Test Setup +| ... | AND | Vpp All Ra Suppress Link Layer | ${nodes} +| Test Teardown | Run Keywords | Show Packet Trace on All DUTs | ${nodes} +| ... | AND | Show vpp trace dump on all DUTs +| ... | AND | Show Vpp Settings | ${nodes['DUT1']} +| ... | AND | Show Vpp Settings | ${nodes['DUT2']} +| ... | AND | Check VPP PID in Teardown +| ... +| Documentation | *ip6-lispgpe-ip6 encapsulation test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-LISP-IPv6-ICMPv6 on DUT1-DUT2,\ +| ... | Eth-IPv6-ICMPv6 on TG-DUTn for IPv6 routing over LISPoIPv6 tunnel. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\ +| ... | routing and static routes. LISPoIPv6 tunnel is configured between\ +| ... | DUT1 and DUT2. +| ... | *[Ver] TG verification:* Test ICMPv6 Echo Request packets are sent in\ +| ... | both directions by TG on links to DUT1 and DUT2; on receive\ +| ... | TG verifies packets for correctness and their IPv6 src-addr, dst-addr\ +| ... | and MAC addresses. +| ... | *[Ref] Applicable standard specifications:* RFC6830. + +*** Test Cases *** +| TC01: DUT1 and DUT2 route IPv6 bidirectionally over LISP GPE tunnel using physical interfaces and VRF is enabled +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. +| | ... | [Enc] Eth-IPv6-LISPGPE-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on\ +| | ... | TG-DUTn. +| | ... | [Cfg] Configure IPv6 LISP static adjacencies on DUT1 and DUT2. +| | ... | [Ver] Case: ip6-lispgpe-ip6 - vrf, phy2lisp +| | ... | Make TG send ICMPv6 Echo Req between its interfaces across both\ +| | ... | DUTs and LISP GPE tunnel between them; verify IPv6 headers on\ +| | ... | received packets are correct. +| | ... | [Ref] RFC6830. +| | ... +| | Given Path for 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in 3-node path are up +| | And Assign Interface To Fib Table | ${dut1_node} +| | ... | ${dut1_to_tg} | ${fib_table_1} | ipv6=${TRUE} +| | And Assign Interface To Fib Table | ${dut2_node} +| | ... | ${dut2_to_tg} | ${fib_table_1} | ipv6=${TRUE} +| | And Vpp Set If IPv6 Addr +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip6} | ${prefix6} +| | And Vpp Set If IPv6 Addr +| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip6} | ${prefix6} +| | And Vpp Set If IPv6 Addr +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_dut1_ip6} | ${prefix6} +| | And Vpp Set If IPv6 Addr +| | ... | ${dut2_node} | ${dut2_to_tg} | ${dut2_to_tg_ip6} | ${prefix6} +| | And Add IP Neighbors | ${fib_table_1} +| | When Set up LISP GPE topology +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE} +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid} +| | ... | ${dut1_to_dut2_ip6_static_adjacency} +| | ... | ${dut2_to_dut1_ip6_static_adjacency} +| | ... | ${dut1_dut2_vni} | ${fib_table_1} +| | Then Send Packet And Check Headers +| | ... | ${tg_node} | ${tg1_ip6} | ${tg2_ip6} +| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} +| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} +| | And Send Packet And Check Headers +| | ... | ${tg_node} | ${tg2_ip6} | ${tg1_ip6} +| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} +| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} + +*** Keywords *** +| Add IP Neighbors +| | [Documentation] +| | ... | Add IP neighbors to physical interfaces on DUTs.\ +| | ... | You can specify fib table ID for DUT-TG interfaces. Default is 0. +| | ... +| | [Arguments] | ${fib_id}=0 +| | Add IP Neighbor | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip6} +| | ... | ${tg_to_dut1_mac} | ${fib_id} +| | Add IP Neighbor | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip6} +| | ... | ${tg_to_dut2_mac} | ${fib_id} +| | Add IP Neighbor | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip6} +| | ... | ${dut2_to_dut1_mac} +| | Add IP Neighbor | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip6} +| | ... | ${dut1_to_dut2_mac}
\ No newline at end of file diff --git a/tests/func/lisp/ipv4_lispgpe_ipv6.robot b/tests/func/lisp/ipv4_lispgpe_ipv6.robot deleted file mode 100644 index fe92ee0882..0000000000 --- a/tests/func/lisp/ipv4_lispgpe_ipv6.robot +++ /dev/null @@ -1,242 +0,0 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/default.robot -| Resource | resources/libraries/robot/testing_path.robot -| Resource | resources/libraries/robot/ipv4.robot -| Resource | resources/libraries/robot/traffic.robot -| Resource | resources/libraries/robot/lisp/lisp_static_adjacency.robot -| Resource | resources/libraries/robot/l2_traffic.robot -| Resource | resources/libraries/robot/lisp/lispgpe.robot -| Resource | resources/libraries/robot/bridge_domain.robot -| Resource | resources/libraries/robot/qemu.robot -| Library | resources.libraries.python.IPUtil -| Library | resources.libraries.python.VhostUser -| Library | resources.libraries.python.Trace -| Library | resources.libraries.python.VPPUtil -# import additional Lisp settings from resource file -| Variables | resources/test_data/lisp/static_adjacency/lisp_static_adjacency.py -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | 3_NODE_DOUBLE_LINK_TOPO -| ... | VM_ENV | HW_ENV -| Test Setup | Func Test Setup -| Test Teardown | Func Test Teardown -| Documentation | *LISP static adjacency test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-LISP-IPv6-ICMPv6 on DUT1-DUT2,\ -| ... | Eth-IPv6-ICMPv6 on TG-DUTn for IPv6 routing over LISPoIPv4 tunnel. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\ -| ... | routing and static routes. LISPoIPv4 tunnel is configured\ -| ... | between DUT1 and DUT2. -| ... | *[Ver] TG verification:* Test ICMPv6 Echo Request packets\ -| ... | are sent in both directions by TG on links to DUT1 and DUT2; on receive\ -| ... | TG verifies packets for correctness and their IPv6 src-addr,\ -| ... | dst-addr and MAC addresses. -| ... | *[Ref] Applicable standard specifications:* RFC6830. - -*** Test Cases *** -| TC01: DUT1 and DUT2 route IPv6 bidirectionally over LISPoIPv4 tunnel -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. -| | ... | [Enc] Eth-IPv4-LISP-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on\ -| | ... | TG-DUTn. -| | ... | [Cfg] On DUT1 and DUT2 configure IPv4 LISP static adjacencies. -| | ... | [Ver] Make TG send ICMPv6 Echo Req between its interfaces across both\ -| | ... | DUTs and LISP tunnel between them; verify IPv6 headers on received\ -| | ... | packets are correct. -| | ... | [Cfg2] Reconf LISP. -| | ... | [Ver2] Verify packets are received again via LISP tunnel. -| | ... | [Ref] RFC6830. -| | Given Path for 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in 3-node path are up -| | And IP addresses are set on interfaces -| | ... | ${dut1_node} | ${dut1_to_dut2} -| | ... | ${dut1_to_dut2_ip6o4} | ${dut_prefix6o4} -| | ... | ${dut1_node} | ${dut1_to_tg} -| | ... | ${dut1_to_tg_ip6o4} | ${tg_prefix6o4} -| | ... | ${dut2_node} | ${dut2_to_dut1} -| | ... | ${dut2_to_dut1_ip6o4} | ${dut_prefix6o4} -| | ... | ${dut2_node} | ${dut2_to_tg} -| | ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} -| | And VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip6o4} -| | And VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip6o4} -| | And Add Arp On Dut | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip6o4} -| | ... | ${tg_to_dut2_mac} -| | And Add Arp On Dut | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip6o4} -| | ... | ${tg_to_dut1_mac} -| | When Set up Lisp topology -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE} -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid} -| | ... | ${dut1_ip6o4_static_adjacency} | ${dut2_ip6o4_static_adjacency} -| | Then Send Packet And Check Headers -| | ... | ${tg_node} | ${tg1_ip6o4} | ${tg2_ip6o4} -| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} -| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} -| | And Send Packet And Check Headers -| | ... | ${tg_node} | ${tg2_ip6o4} | ${tg1_ip6o4} -| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} -| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} -| | When Change Lisp Configuration | ${dut1_node} | ${dut2_node} -| | ... | ${dut1_to_dut2} | ${dut2_to_dut1} | ${dut1_to_dut2_mac} -| | ... | ${dut2_to_dut1_mac} | ${dut1_to_dut2_ip6o4} -| | ... | ${dut2_to_dut1_ip6o4_reconf} | ${dut_prefix6o4} -| | ... | ${dut1_ip6o4_static_adjacency} -| | ... | ${dut1_ip6o4_static_adjacency_reconf} -| | Then Send Packet And Check Headers -| | ... | ${tg_node} | ${tg1_ip6o4} | ${tg2_ip6o4} -| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} -| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} -| | And Send Packet And Check Headers -| | ... | ${tg_node} | ${tg2_ip6o4} | ${tg1_ip6o4} -| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} -| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} - -| TC02: DUT1 and DUT2 route IPv6 bidirectionally over LISP GPE tunnel using physical interfaces and VRF is enabled -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. -| | ... | [Enc] Eth-IPv4-LISPGPE-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on\ -| | ... | TG-DUTn. -| | ... | [Cfg] Configure IPv4 LISP static adjacencies on DUT1 and DUT2. -| | ... | [Ver] Case: ip6-lispgpe-ip4 - vrf, phy2lisp -| | ... | Make TG send ICMPv4 Echo Req between its interfaces across both\ -| | ... | DUTs and LISP GPE tunnel between them; verify IPv6 headers on\ -| | ... | received packets are correct. -| | ... | [Ref] RFC6830. -| | ... -| | [Teardown] | Run Keywords | Show Packet Trace on All DUTs | ${nodes} -| | ... | AND | Show vpp trace dump on all DUTs -| | ... | AND | Show Vpp Settings | ${nodes['DUT1']} -| | ... | AND | Show Vpp Settings | ${nodes['DUT2']} -| | ... | AND | Check VPP PID in Teardown -| | ... -| | Given Path for 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in 3-node path are up -| | And Assign Interface To Fib Table | ${dut1_node} -| | ... | ${dut1_to_tg} | ${fib_table_1} | ip6=${TRUE} -| | And Assign Interface To Fib Table | ${dut2_node} -| | ... | ${dut2_to_tg} | ${fib_table_1} | ip6=${TRUE} -| | And Add IP Neighbors | ${fib_table_1} -| | And IP addresses are set on interfaces -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip6o4} -| | ... | ${dut_prefix6o4} -| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip6o4} | ${tg_prefix6o4} -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_dut1_ip6o4} -| | ... | ${dut_prefix6o4} -| | ... | ${dut2_node} | ${dut2_to_tg} | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} -| | When Set up LISP GPE topology -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE} -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid} -| | ... | ${dut1_ip6o4_static_adjacency} -| | ... | ${dut2_ip6o4_static_adjacency} -| | ... | ${dut1_dut2_vni} | ${fib_table_1} -| | Then Send Packet And Check Headers -| | ... | ${tg_node} | ${tg1_ip6o4} | ${tg2_ip6o4} -| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} -| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} -| | And Send Packet And Check Headers -| | ... | ${tg_node} | ${tg2_ip6o4} | ${tg1_ip6o4} -| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} -| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} - -| TC03: DUT1 and DUT2 route IPv6 bidirectionally over LISP GPE tunnel using vhost interfaces -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. -| | ... | [Enc] Eth-IPv4-LISPGPE-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on\ -| | ... | TG-DUTn. -| | ... | [Cfg] Configure IPv4 LISP static adjacencies on DUT1 and DUT2. -| | ... | [Ver] Case: ip6-lispgpe-ip4 - main fib, virt2lisp -| | ... | Make TG send ICMPv6 Echo Req between its interfaces across both\ -| | ... | DUTs and LISP GPE tunnel between them; verify IPv6 headers on\ -| | ... | received packets are correct. -| | ... -| | [Teardown] | Run Keywords | Show Packet Trace on All DUTs | ${nodes} -| | ... | AND | Show vpp trace dump on all DUTs -| | ... | AND | Show Vpp Settings | ${nodes['DUT1']} -| | ... | AND | Show Vpp Settings | ${nodes['DUT2']} -| | ... | AND | Stop and Clear QEMU | ${dut1_node} | ${vm_node} -| | ... | AND | Check VPP PID in Teardown -| | ... -| | Given Path for 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in 3-node path are up -| | And IP addresses are set on interfaces -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip6o4} -| | ... | ${dut_prefix6o4} -| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip6o4} | ${tg_prefix6o4} -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_dut1_ip6o4} -| | ... | ${dut_prefix6o4} -| | ... | ${dut2_node} | ${dut2_to_tg} | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} -| | And Add Arp On Dut | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip6o4} -| | ... | ${tg_to_dut1_mac} -| | And Add Arp On Dut | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip6o4} -| | ... | ${tg_to_dut2_mac} -| | And Add Arp On Dut | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip6o4} -| | ... | ${dut2_to_dut1_mac} -| | And Add Arp On Dut | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip6o4} -| | ... | ${dut1_to_dut2_mac} -| | When Set up LISP GPE topology -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE} -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid} -| | ... | ${dut1_ip6o4_static_adjacency} -| | ... | ${dut2_ip6o4_static_adjacency} -| | And Setup Qemu DUT1 -| | Then Send Packet And Check Headers -| | ... | ${tg_node} | ${tg1_ip6o4} | ${tg2_ip6o4} -| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dst_vhost_mac} -| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} -| | And Send Packet And Check Headers -| | ... | ${tg_node} | ${tg2_ip6o4} | ${tg1_ip6o4} -| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} -| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} - - -*** Keywords *** -| Add IP Neighbors -| | [Documentation] -| | ... | Add IP neighbors to physical interfaces on DUTs.\ -| | ... | You can specify fib table ID for DUT-TG interfaces. Default is 0. -| | ... -| | [Arguments] | ${fib_id}=0 -| | Add IP Neighbor | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip6o4} -| | ... | ${tg_to_dut1_mac} | ${fib_id} -| | Add IP Neighbor | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip6o4} -| | ... | ${tg_to_dut2_mac} | ${fib_id} -| | Add IP Neighbor | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip6o4} -| | ... | ${dut2_to_dut1_mac} -| | Add IP Neighbor | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip6o4} -| | ... | ${dut1_to_dut2_mac} - -| Setup Qemu DUT1 -| | [Documentation] | Setup Vhosts on DUT1 and setup IP on one of them. Setup\ -| | ... | Qemu and bridge the vhosts. -| | ... -| | ${vhost1}= | Vpp Create Vhost User Interface | ${dut1_node} | ${sock1} -| | ${vhost2}= | Vpp Create Vhost User Interface | ${dut1_node} | ${sock2} -| | Set Interface Address | ${dut1_node} | ${vhost2} | ${vhost_ip} | ${prefix4} -| | Set Interface State | ${dut1_node} | ${vhost1} | up -| | Set Interface State | ${dut1_node} | ${vhost2} | up -| | Bridge domain on DUT node is created | ${dut1_node} | ${bid} | learn=${TRUE} -| | Interface is added to bridge domain | ${dut1_node} -| | ... | ${dut1_to_tg} | ${bid} | 0 -| | Interface is added to bridge domain | ${dut1_node} -| | ... | ${vhost1} | ${bid} | 0 -| | ${vhost_mac}= | Get Vhost User Mac By SW Index | ${dut1_node} | ${vhost2} -| | Set test variable | ${dst_vhost_mac} | ${vhost_mac} -| | VM for Vhost L2BD forwarding is setup | ${dut1_node} | ${sock1} | ${sock2} diff --git a/tests/func/lisp/ipv6_lispgpe_ipv6.robot b/tests/func/lisp/ipv6_lispgpe_ipv6.robot deleted file mode 100644 index 8b00eda574..0000000000 --- a/tests/func/lisp/ipv6_lispgpe_ipv6.robot +++ /dev/null @@ -1,291 +0,0 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Library | resources.libraries.python.topology.Topology -| Library | resources.libraries.python.NodePath -| Library | resources.libraries.python.Trace -| Library | resources.libraries.python.IPUtil -| Library | resources.libraries.python.IPv6Setup -| Library | resources.libraries.python.VPPUtil -| Resource | resources/libraries/robot/traffic.robot -| Resource | resources/libraries/robot/default.robot -| Resource | resources/libraries/robot/interfaces.robot -| Resource | resources/libraries/robot/testing_path.robot -| Resource | resources/libraries/robot/qemu.robot -| Resource | resources/libraries/robot/bridge_domain.robot -| Resource | resources/libraries/robot/vrf.robot -| Resource | resources/libraries/robot/lisp/lispgpe.robot -# Import configuration and test data: -| Variables | resources/test_data/lisp/ipv6_lispgpe_ipv6/ipv6_lispgpe_ipv6.py -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | LISP -| ... -| Test Setup | Run Keywords | Func Test Setup -| ... | AND | Vpp All Ra Suppress Link Layer | ${nodes} -| Test Teardown | Run Keywords | Show Packet Trace on All DUTs | ${nodes} -| ... | AND | Show vpp trace dump on all DUTs -| ... | AND | Show Vpp Settings | ${nodes['DUT1']} -| ... | AND | Show Vpp Settings | ${nodes['DUT2']} -| ... | AND | Check VPP PID in Teardown -| ... -| Documentation | *ip6-lispgpe-ip6 encapsulation test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-LISP-IPv6-ICMPv6 on DUT1-DUT2,\ -| ... | Eth-IPv6-ICMPv6 on TG-DUTn for IPv6 routing over LISPoIPv6 tunnel. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\ -| ... | routing and static routes. LISPoIPv6 tunnel is configured between\ -| ... | DUT1 and DUT2. -| ... | *[Ver] TG verification:* Test ICMPv6 Echo Request packets are sent in\ -| ... | both directions by TG on links to DUT1 and DUT2; on receive\ -| ... | TG verifies packets for correctness and their IPv6 src-addr, dst-addr\ -| ... | and MAC addresses. -| ... | *[Ref] Applicable standard specifications:* RFC6830. - -*** Test Cases *** -| TC01: DUT1 and DUT2 route IPv6 bidirectionally over LISP GPE tunnel using physical interfaces -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. -| | ... | [Enc] Eth-IPv6-LISPGPE-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on\ -| | ... | TG-DUTn. -| | ... | [Cfg] Configure IPv6 LISP static adjacencies on DUT1 and DUT2. -| | ... | [Ver] Case: ip6-lispgpe-ip6 - phy2lisp -| | ... | Make TG send ICMPv6 Echo Req between its interfaces across both\ -| | ... | DUTs and LISP GPE tunnel between them; verify IPv6 headers on\ -| | ... | received packets are correct. -| | ... | [Ref] RFC6830. -| | ... -| | Given Path for 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in 3-node path are up -| | And Vpp Set If IPv6 Addr -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip6} | ${prefix6} -| | And Vpp Set If IPv6 Addr -| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip6} | ${prefix6} -| | And Vpp Set If IPv6 Addr -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_dut1_ip6} | ${prefix6} -| | And Vpp Set If IPv6 Addr -| | ... | ${dut2_node} | ${dut2_to_tg} | ${dut2_to_tg_ip6} | ${prefix6} -| | And Add IP Neighbor | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip6} -| | ... | ${tg_to_dut1_mac} -| | And Add IP Neighbor | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip6} -| | ... | ${tg_to_dut2_mac} -| | And Add IP Neighbor | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip6} -| | ... | ${dut2_to_dut1_mac} -| | And Add IP Neighbor | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip6} -| | ... | ${dut1_to_dut2_mac} -| | When Set up LISP GPE topology -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE} -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid} -| | ... | ${dut1_to_dut2_ip6_static_adjacency} -| | ... | ${dut2_to_dut1_ip6_static_adjacency} -| | Then Send Packet And Check Headers -| | ... | ${tg_node} | ${tg1_ip6} | ${tg2_ip6} -| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} -| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} -| | And Send Packet And Check Headers -| | ... | ${tg_node} | ${tg2_ip6} | ${tg1_ip6} -| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} -| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} - -| TC02: DUT1 and DUT2 route IPv6 bidirectionally over LISP GPE tunnel using physical interfaces and VRF is enabled -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. -| | ... | [Enc] Eth-IPv6-LISPGPE-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on\ -| | ... | TG-DUTn. -| | ... | [Cfg] Configure IPv6 LISP static adjacencies on DUT1 and DUT2. -| | ... | [Ver] Case: ip6-lispgpe-ip6 - vrf, phy2lisp -| | ... | Make TG send ICMPv6 Echo Req between its interfaces across both\ -| | ... | DUTs and LISP GPE tunnel between them; verify IPv6 headers on\ -| | ... | received packets are correct. -| | ... | [Ref] RFC6830. -| | ... -| | Given Path for 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in 3-node path are up -| | And Assign Interface To Fib Table | ${dut1_node} -| | ... | ${dut1_to_tg} | ${fib_table_1} | ipv6=${TRUE} -| | And Assign Interface To Fib Table | ${dut2_node} -| | ... | ${dut2_to_tg} | ${fib_table_1} | ipv6=${TRUE} -| | And Vpp Set If IPv6 Addr -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip6} | ${prefix6} -| | And Vpp Set If IPv6 Addr -| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip6} | ${prefix6} -| | And Vpp Set If IPv6 Addr -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_dut1_ip6} | ${prefix6} -| | And Vpp Set If IPv6 Addr -| | ... | ${dut2_node} | ${dut2_to_tg} | ${dut2_to_tg_ip6} | ${prefix6} -| | And Add IP Neighbors | ${fib_table_1} -| | When Set up LISP GPE topology -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE} -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid} -| | ... | ${dut1_to_dut2_ip6_static_adjacency} -| | ... | ${dut2_to_dut1_ip6_static_adjacency} -| | ... | ${dut1_dut2_vni} | ${fib_table_1} -| | Then Send Packet And Check Headers -| | ... | ${tg_node} | ${tg1_ip6} | ${tg2_ip6} -| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} -| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} -| | And Send Packet And Check Headers -| | ... | ${tg_node} | ${tg2_ip6} | ${tg1_ip6} -| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} -| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} - -| TC03: DUT1 and DUT2 route IPv6 bidirectionally over LISP GPE tunnel using vhost interfaces -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. -| | ... | [Enc] Eth-IPv6-LISPGPE-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on\ -| | ... | TG-DUTn. -| | ... | [Cfg] Configure IPv6 LISP static adjacencies on DUT1 and DUT2. -| | ... | [Ver] Case: ip6-ipsec-lispgpe-ip6 - main fib, virt2lisp -| | ... | Make TG send ICMPv6 Echo Req between its interfaces across both\ -| | ... | DUTs and LISP GPE tunnel between them; verify IPv6 headers on\ -| | ... | received packets are correct. -| | ... -| | [Teardown] | Run Keywords | Show Packet Trace on All DUTs | ${nodes} -| | ... | AND | Show vpp trace dump on all DUTs -| | ... | AND | Show Vpp Settings | ${nodes['DUT1']} -| | ... | AND | Show Vpp Settings | ${nodes['DUT2']} -| | ... | AND | Stop and Clear QEMU | ${dut1_node} | ${vm_node} -| | ... | AND | Check VPP PID in Teardown -| | ... -| | Given Path for 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in 3-node path are up -| | And Vpp Set If IPv6 Addr -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip6} | ${prefix6} -| | And Vpp Set If IPv6 Addr -| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip6} | ${prefix6} -| | And Vpp Set If IPv6 Addr -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_dut1_ip6} | ${prefix6} -| | And Vpp Set If IPv6 Addr -| | ... | ${dut2_node} | ${dut2_to_tg} | ${dut2_to_tg_ip6} | ${prefix6} -| | And Add IP Neighbor | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip6} -| | ... | ${tg_to_dut1_mac} -| | And Add IP Neighbor | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip6} -| | ... | ${tg_to_dut2_mac} -| | And Add IP Neighbor | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip6} -| | ... | ${dut2_to_dut1_mac} -| | And Add IP Neighbor | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip6} -| | ... | ${dut1_to_dut2_mac} -| | When Set up LISP GPE topology -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE} -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid} -| | ... | ${dut1_to_dut2_ip6_static_adjacency} -| | ... | ${dut2_to_dut1_ip6_static_adjacency} -| | And Setup Qemu DUT1 -| | Then Send Packet And Check Headers -| | ... | ${tg_node} | ${tg1_ip6} | ${tg2_ip6} -| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dst_vhost_mac} -| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} -| | And Send Packet And Check Headers -| | ... | ${tg_node} | ${tg2_ip6} | ${tg1_ip6} -| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} -| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} - -| TC04: DUT1 and DUT2 route IPv6 bidirectionally over LISP GPE tunnel using vhost interfaces and VRF is enabled -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. -| | ... | [Enc] Eth-IPv6-LISPGPE-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on\ -| | ... | TG-DUTn. -| | ... | [Cfg] Configure IPv6 LISP static adjacencies on DUT1 and DUT2. -| | ... | [Ver] Case: ip6-lispgpe-ip6 - vrf, virt2lisp -| | ... | Make TG send ICMPv6 Echo Req between its interfaces across both\ -| | ... | DUTs and LISP GPE tunnel between them; verify IPv6 headers on\ -| | ... | received packets are correct. -| | ... | [Ref] RFC6830. -| | ... -| | [Teardown] | Run Keywords | Show Packet Trace on All DUTs | ${nodes} -| | ... | AND | Show vpp trace dump on all DUTs -| | ... | AND | Show Vpp Settings | ${nodes['DUT1']} -| | ... | AND | Show Vpp Settings | ${nodes['DUT2']} -| | ... | AND | Stop and Clear QEMU | ${dut1_node} | ${vm_node} -| | ... | AND | Check VPP PID in Teardown -| | ... -| | Given Path for 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in 3-node path are up -| | And Assign Interface To Fib Table | ${dut1_node} -| | ... | ${dut1_to_tg} | ${fib_table_1} | ipv6=${TRUE} -| | And Assign Interface To Fib Table | ${dut2_node} -| | ... | ${dut2_to_tg} | ${fib_table_1} | ipv6=${TRUE} -| | And Vpp Set If IPv6 Addr -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip6} | ${prefix6} -| | And Vpp Set If IPv6 Addr -| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip6} | ${prefix6} -| | And Vpp Set If IPv6 Addr -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_dut1_ip6} | ${prefix6} -| | And Vpp Set If IPv6 Addr -| | ... | ${dut2_node} | ${dut2_to_tg} | ${dut2_to_tg_ip6} | ${prefix6} -| | And Add IP Neighbors | ${fib_table_1} -| | When Set up LISP GPE topology -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE} -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid} -| | ... | ${dut1_to_dut2_ip6_static_adjacency} -| | ... | ${dut2_to_dut1_ip6_static_adjacency} -| | ... | ${dut1_dut2_vni} | ${fib_table_1} -| | And Setup Qemu DUT1 | ${fib_table_1} -| | Then Send Packet And Check Headers -| | ... | ${tg_node} | ${tg1_ip6} | ${tg2_ip6} -| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dst_vhost_mac} -| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} -| | And Send Packet And Check Headers -| | ... | ${tg_node} | ${tg2_ip6} | ${tg1_ip6} -| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} -| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} - -*** Keywords *** -| Setup Qemu DUT1 -| | [Documentation] | Setup Vhosts on DUT1 and setup IP on one of them. Setup\ -| | ... | Qemu and bridge the vhosts. Optionally, you can set fib table ID\ -| | ... | where the vhost2 interface should be assigned to. -| | ... -| | [Arguments] | ${fib_table}=0 -| | ... -| | ${vhost1}= | Vpp Create Vhost User Interface | ${dut1_node} | ${sock1} -| | ${vhost2}= | Vpp Create Vhost User Interface | ${dut1_node} | ${sock2} -| | Vpp Set If IPv6 Addr | ${dut1_node} | ${vhost2} | ${vhost_ip} -| | ... | ${prefix6} -| | Assign Interface To Fib Table | ${dut1_node} -| | ... | ${vhost2} | ${fib_table} | ipv6=${TRUE} -| | Set Interface State | ${dut1_node} | ${vhost1} | up -| | Set Interface State | ${dut1_node} | ${vhost2} | up -| | Bridge domain on DUT node is created | ${dut1_node} | ${bid} | learn=${TRUE} -| | Interface is added to bridge domain | ${dut1_node} -| | ... | ${dut1_to_tg} | ${bid} | 0 -| | Interface is added to bridge domain | ${dut1_node} -| | ... | ${vhost1} | ${bid} | 0 -| | ${vhost_mac}= | Get Vhost User Mac By SW Index | ${dut1_node} | ${vhost2} -| | Set test variable | ${dst_vhost_mac} | ${vhost_mac} -| | VM for Vhost L2BD forwarding is setup | ${dut1_node} | ${sock1} | ${sock2} - -| Add IP Neighbors -| | [Documentation] -| | ... | Add IP neighbors to physical interfaces on DUTs.\ -| | ... | You can specify fib table ID for DUT-TG interfaces. Default is 0. -| | ... -| | [Arguments] | ${fib_id}=0 -| | Add IP Neighbor | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip6} -| | ... | ${tg_to_dut1_mac} | ${fib_id} -| | Add IP Neighbor | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip6} -| | ... | ${tg_to_dut2_mac} | ${fib_id} -| | Add IP Neighbor | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip6} -| | ... | ${dut2_to_dut1_mac} -| | Add IP Neighbor | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip6} -| | ... | ${dut1_to_dut2_mac}
\ No newline at end of file diff --git a/tests/func/policer/policer_ip4.robot b/tests/func/policer/eth2p-ethip4-ip4base-ipolicemarkbase-func.robot index 4cb3686788..4cb3686788 100644 --- a/tests/func/policer/policer_ip4.robot +++ b/tests/func/policer/eth2p-ethip4-ip4base-ipolicemarkbase-func.robot diff --git a/tests/func/policer/policer_ip6.robot b/tests/func/policer/eth2p-ethip6-ip6base-ipolicemarkbase-func.robot index 6a7ae1a306..6a7ae1a306 100644 --- a/tests/func/policer/policer_ip6.robot +++ b/tests/func/policer/eth2p-ethip6-ip6base-ipolicemarkbase-func.robot diff --git a/tests/func/rpf/ipv4_rpf_untagged.robot b/tests/func/rpf/eth2p-ethip4-ip4base-rpf-func.robot index 708477a71d..372940dd82 100644 --- a/tests/func/rpf/ipv4_rpf_untagged.robot +++ b/tests/func/rpf/eth2p-ethip4-ip4base-rpf-func.robot @@ -29,7 +29,7 @@ | ... | with one link between the nodes. | ... | *[Cfg] DUT configuration:* DUT2 is configured with L2 Cross connect. | ... | DUT1 is configured with IP source check on link to TG, -| ... | *[Ver] TG verification:*Test ICMP Echo Request packets are sent +| ... | *[Ver] TG verification:* Test ICMP Echo Request packets are sent | ... | in one direction by TG on link to DUT1 and received on TG link | ... | to DUT2. On receive TG verifies if packets which source address | ... | is not in routes are dropped. diff --git a/tests/func/softwire/lightweight_4over6.robot b/tests/func/softwire/eth2p-ethip4--ethip6ip4-ip4base--ip6base-swirelw46-func.robot index f96ee19b4e..f96ee19b4e 100644 --- a/tests/func/softwire/lightweight_4over6.robot +++ b/tests/func/softwire/eth2p-ethip4--ethip6ip4-ip4base--ip6base-swirelw46-func.robot diff --git a/tests/func/softwire/map_e.robot b/tests/func/softwire/eth2p-ethip4--ethip6ip4-ip4base--ip6base-swiremape-func.robot index 0ddac51a1b..0ddac51a1b 100644 --- a/tests/func/softwire/map_e.robot +++ b/tests/func/softwire/eth2p-ethip4--ethip6ip4-ip4base--ip6base-swiremape-func.robot diff --git a/tests/func/softwire/map_t.robot b/tests/func/softwire/eth2p-ethip4--ethip6ip4-ip4base--ip6base-swiremapt-func.robot index 4167ca2bcf..4167ca2bcf 100644 --- a/tests/func/softwire/map_t.robot +++ b/tests/func/softwire/eth2p-ethip4--ethip6ip4-ip4base--ip6base-swiremapt-func.robot diff --git a/tests/func/tap/api-crud-tap-func.robot b/tests/func/tap/api-crud-tap-func.robot new file mode 100644 index 0000000000..762c4e3df2 --- /dev/null +++ b/tests/func/tap/api-crud-tap-func.robot @@ -0,0 +1,69 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/default.robot +| Resource | resources/libraries/robot/ipv4.robot +| Resource | resources/libraries/robot/ipv6.robot +| Resource | resources/libraries/robot/interfaces.robot +| Resource | resources/libraries/robot/bridge_domain.robot +| Resource | resources/libraries/robot/testing_path.robot +| Resource | resources/libraries/robot/traffic.robot +| Library | resources.libraries.python.Trace +| Library | resources.libraries.python.Tap +| Library | resources.libraries.python.Namespaces +| Library | resources.libraries.python.IPUtil +| Force Tags | HW_ENV | VM_ENV | 3_NODE_DOUBLE_LINK_TOPO +| Test Setup | Run Keywords | Func Test Setup +| ... | AND | Clean Up Namespaces | ${nodes['DUT1']} +| Test Teardown | Run Keywords | Func Test Teardown +| ... | AND | Clean Up Namespaces | ${nodes['DUT1']} +| Documentation | *Tap Interface CRUD Tests* +| ... | *[Top] Network Topologies:* TG=DUT1 2-node topology with two links +| ... | between nodes. +| ... | *[Enc] Packet Encapsulations:* No packet sent. +| ... | *[Cfg] DUT configuration:* Add/Modify/Delete linux-TAP on DUT1. +| ... | *[Ver] Verification:* Check dump of tap interfaces for correctness. +| ... | *[Ref] Applicable standard specifications:* + +*** Variables *** +| ${tap_int1}= | tap_int1 +| ${tap_int2}= | tap_int2 +| ${mod_tap_name}= | tap_int1MOD + +*** Test Cases *** +| TC01: Tap Interface Modify And Delete +| | [Documentation] +| | ... | [Top] TG-DUT1-TG. +| | ... | [Enc] Eth-IPv4-ICMPv4. +| | ... | [Cfg] Set two TAP interfaces. +| | ... | [Ver] Verify that TAP interface can be modified, deleted, and no other +| | ... | TAP interface is affected. +| | Given Path for 2-node testing is set | ${nodes['TG']} | ${nodes['DUT1']} +| | ... | ${nodes['TG']} +| | And Interfaces in 2-node path are up +| | ${int1}= | And Add Tap Interface | ${dut_node} | ${tap_int1} +| | ${int2}= | And Add Tap Interface | ${dut_node} | ${tap_int2} +| | And Set Interface State | ${dut_node} | ${int1} | up +| | And Set Interface State | ${dut_node} | ${int2} | up +| | When Modify Tap Interface | ${dut_node} | ${int1} | ${mod_tap_name} +| | Then Check Tap Present | ${dut_node} | ${mod_tap_name} +| | When Delete Tap Interface | ${dut_node} | ${int1} +| | Then Run Keyword And Expect Error +| | ... | Tap interface :${mod_tap_name} does not exist +| | ... | Check Tap Present | ${dut_node} | ${mod_tap_name} +| | And Check Tap Present | ${dut_node} | ${tap_int2} +| | When Delete Tap Interface | ${dut_node} | ${int2} +| | Then Run Keyword And Expect Error +| | ... | ValueError: No JSON object could be decoded +| | ... | Check Tap Present | ${dut_node} | ${tap_int2} diff --git a/tests/func/tap/eth2p-eth-l2bdbasemaclrn-eth-2tap-func.robot b/tests/func/tap/eth2p-eth-l2bdbasemaclrn-eth-2tap-func.robot new file mode 100644 index 0000000000..6c47c5c574 --- /dev/null +++ b/tests/func/tap/eth2p-eth-l2bdbasemaclrn-eth-2tap-func.robot @@ -0,0 +1,92 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/default.robot +| Resource | resources/libraries/robot/ipv4.robot +| Resource | resources/libraries/robot/ipv6.robot +| Resource | resources/libraries/robot/interfaces.robot +| Resource | resources/libraries/robot/bridge_domain.robot +| Resource | resources/libraries/robot/testing_path.robot +| Resource | resources/libraries/robot/traffic.robot +| Library | resources.libraries.python.Trace +| Library | resources.libraries.python.Tap +| Library | resources.libraries.python.Namespaces +| Library | resources.libraries.python.IPUtil +| Force Tags | HW_ENV | VM_ENV | 3_NODE_DOUBLE_LINK_TOPO +| Test Setup | Run Keywords | Func Test Setup +| ... | AND | Clean Up Namespaces | ${nodes['DUT1']} +| Test Teardown | Run Keywords | Func Test Teardown +| ... | AND | Clean Up Namespaces | ${nodes['DUT1']} +| Documentation | *Tap Interface Traffic Tests* +| ... | *[Top] Network Topologies:* TG=DUT1 2-node topology with two links +| ... | between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for L2 switching of +| ... | IPv4. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 +| ... | bridge-domain (L2BD) MAC learning enabled; Split Horizon Groups (SHG) +| ... | are set depending on test case; Namespaces (NM) +| ... | are set on DUT1 with attached linux-TAP. +| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets +| ... | are sent by TG on link to DUT1; On receipt TG verifies packets +| ... | for correctness and their IPv4 src-addr, dst-addr, and MAC addresses. +| ... | *[Ref] Applicable standard specifications:* + +*** Variables *** +| ${bid_from_TG}= | 19 +| ${bid_to_TG}= | 20 +| ${bid_TAP}= | tapBr + +| ${tap_int1}= | tap_int1 +| ${tap_int2}= | tap_int2 + +*** Test Cases *** +| TC01: Tap Interface Simple BD +| | [Documentation] +| | ... | [Top] TG-DUT1-TG. +| | ... | [Enc] Eth-IPv4-ICMPv4. +| | ... | [Cfg] On DUT1 configure two +| | ... | L2BD with two if's for each L2BD with MAC learning and one L2BD +| | ... | joining two linux-TAP interfaces created by VPP located in namespace. +| | ... | [Ver] Packet sent from TG is passed through all L2BD and received +| | ... | back on TG. Then src_ip, dst_ip and MAC are checked. +| | ... +| | [Teardown] | Run Keywords +| | ... | Linux Del Bridge | ${dut_node} | ${bid_TAP} | AND +| | ... | Show Packet Trace on All DUTs | ${nodes} | AND +| | ... | Clean Up Namespaces | ${nodes['DUT1']} | AND +| | ... | Check VPP PID in Teardown +| | ... +| | Given Path for 2-node testing is set | ${nodes['TG']} | ${nodes['DUT1']} +| | ... | ${nodes['TG']} +| | And Interfaces in 2-node path are up +| | ${int1}= | And Add Tap Interface | ${dut_node} | ${tap_int1} +| | ${int2}= | And Add Tap Interface | ${dut_node} | ${tap_int2} +| | And Set Interface State | ${dut_node} | ${int1} | up +| | And Set Interface State | ${dut_node} | ${int2} | up +| | And Bridge domain on DUT node is created | ${dut_node} +| | ... | ${bid_from_TG} | learn=${TRUE} +| | And Bridge domain on DUT node is created | ${dut_node} +| | ... | ${bid_to_TG} | learn=${TRUE} +| | And Linux Add Bridge | ${dut_node} +| | ... | ${bid_TAP} | ${tap_int1} | ${tap_int2} +| | And Interface is added to bridge domain | ${dut_node} +| | ... | ${int1} | ${bid_to_TG} | 0 +| | And Interface is added to bridge domain | ${dut_node} +| | ... | ${dut_to_tg_if1} | ${bid_to_TG} | 0 +| | And Interface is added to bridge domain | ${dut_node} +| | ... | ${int2} | ${bid_from_TG} | 0 +| | And Interface is added to bridge domain | ${dut_node} +| | ... | ${dut_to_tg_if2} | ${bid_from_TG} | 0 +| | Then Send and receive ICMP Packet | ${tg_node} +| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if2} diff --git a/tests/func/tap/tap_interface.robot b/tests/func/tap/eth2p-eth-l2bdbasemaclrn-l2shg-eth-2tap-func.robot index 2acdad8d37..8620dd05fd 100644 --- a/tests/func/tap/tap_interface.robot +++ b/tests/func/tap/eth2p-eth-l2bdbasemaclrn-l2shg-eth-2tap-func.robot @@ -43,19 +43,10 @@ | ... | *[Ref] Applicable standard specifications:* *** Variables *** -| ${tap1_VPP_ip}= | 16.0.10.1 -| ${tap2_VPP_ip}= | 16.0.20.1 - | ${tap1_NM_ip}= | 16.0.10.2 -| ${tap2_NM_ip}= | 16.0.20.2 | ${tap2_NM_SHG}= | 16.0.10.3 -| ${bid_from_TG}= | 19 -| ${bid_to_TG}= | 20 -| ${bid_NM}= | container1_br -| ${bid_TAP}= | tapBr | ${bd_id1}= | 21 -| ${bd_id2}= | 22 | ${shg1}= | 2 | ${shg2}= | 3 @@ -64,126 +55,15 @@ | ${tap_int1}= | tap_int1 | ${tap_int2}= | tap_int2 -| ${mod_tap_name}= | tap_int1MOD | ${namespace1}= | nmspace1 | ${namespace2}= | nmspace2 -| ${dut_ip_address}= | 192.168.0.1 -| ${tg_ip_address}= | 192.168.0.2 | ${tg_ip_address_SHG}= | 16.0.10.20 -| ${tg_ip_address_GW}= | 192.168.0.0 - | ${prefix}= | 24 *** Test Cases *** -| TC01: Tap Interface Simple BD -| | [Documentation] -| | ... | [Top] TG-DUT1-TG. -| | ... | [Enc] Eth-IPv4-ICMPv4. -| | ... | [Cfg] On DUT1 configure two -| | ... | L2BD with two if's for each L2BD with MAC learning and one L2BD -| | ... | joining two linux-TAP interfaces created by VPP located in namespace. -| | ... | [Ver] Packet sent from TG is passed through all L2BD and received -| | ... | back on TG. Then src_ip, dst_ip and MAC are checked. -| | ... -| | [Teardown] | Run Keywords -| | ... | Linux Del Bridge | ${dut_node} | ${bid_TAP} | AND -| | ... | Show Packet Trace on All DUTs | ${nodes} | AND -| | ... | Clean Up Namespaces | ${nodes['DUT1']} | AND -| | ... | Check VPP PID in Teardown -| | ... -| | Given Path for 2-node testing is set | ${nodes['TG']} | ${nodes['DUT1']} -| | ... | ${nodes['TG']} -| | And Interfaces in 2-node path are up -| | ${int1}= | And Add Tap Interface | ${dut_node} | ${tap_int1} -| | ${int2}= | And Add Tap Interface | ${dut_node} | ${tap_int2} -| | And Set Interface State | ${dut_node} | ${int1} | up -| | And Set Interface State | ${dut_node} | ${int2} | up -| | And Bridge domain on DUT node is created | ${dut_node} -| | ... | ${bid_from_TG} | learn=${TRUE} -| | And Bridge domain on DUT node is created | ${dut_node} -| | ... | ${bid_to_TG} | learn=${TRUE} -| | And Linux Add Bridge | ${dut_node} -| | ... | ${bid_TAP} | ${tap_int1} | ${tap_int2} -| | And Interface is added to bridge domain | ${dut_node} -| | ... | ${int1} | ${bid_to_TG} | 0 -| | And Interface is added to bridge domain | ${dut_node} -| | ... | ${dut_to_tg_if1} | ${bid_to_TG} | 0 -| | And Interface is added to bridge domain | ${dut_node} -| | ... | ${int2} | ${bid_from_TG} | 0 -| | And Interface is added to bridge domain | ${dut_node} -| | ... | ${dut_to_tg_if2} | ${bid_from_TG} | 0 -| | Then Send and receive ICMP Packet | ${tg_node} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if2} - -| TC02: Tap Interface IP Ping Without Namespace -| | [Documentation] -| | ... | [Top] TG-DUT1-TG. -| | ... | [Enc] Eth-IPv4-ICMPv4. -| | ... | [Cfg] On DUT1 configure two interface addresses with IPv4 of which -| | ... | one is TAP interface ( dut_to_tg_if and TAP ). -| | ... | and one is linux-TAP. -| | ... | [Ver] Packet sent from TG gets to the destination and ICMP-reply is -| | ... | received on TG. -| | Given Path for 2-node testing is set | ${nodes['TG']} | ${nodes['DUT1']} -| | ... | ${nodes['TG']} -| | And Interfaces in 2-node path are up -| | ${int1}= | And Add Tap Interface | ${dut_node} | ${tap_int1} | -| | And Set Interface Address -| | ... | ${dut_node} | ${int1} | ${tap1_VPP_ip} | ${prefix} -| | And Set Interface Address -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${dut_ip_address} | ${prefix} -| | And Set Interface State | ${dut_node} | ${int1} | up -| | And Set Linux Interface MAC | ${dut_node} | ${tap_int1} | ${tap1_NM_mac} -| | And Set Linux Interface IP | ${dut_node} -| | ... | ${tap_int1} | ${tap1_NM_ip} | ${prefix} -| | And Add Route | ${dut_node} -| | ... | ${tg_ip_address_GW} | ${prefix} | ${tap1_VPP_ip} -| |Â And Add Arp On Dut | ${dut_node} | ${dut_to_tg_if1} -| | ... | ${tg_ip_address} | ${tg_to_dut_if1_mac} -| |Â And Add Arp On Dut | ${dut_node} | ${int1} -| | ... | ${tap1_NM_ip} | ${tap1_NM_mac} -| | Then Node replies to ICMP echo request | ${tg_node} | ${tg_to_dut_if1} -| | ... | ${dut_to_tg_if1_mac} | ${tg_to_dut_if1_mac} -| | ... | ${tap1_NM_ip} | ${tg_ip_address} - -| TC03: Tap Interface IP Ping With Namespace -| | [Documentation] -| | ... | [Top] TG-DUT1-TG. -| | ... | [Enc] Eth-IPv4-ICMPv4. -| | ... | [Cfg] On DUT1 configure two interface addresses with IPv4 of which -| | ... | one is TAP interface ( dut_to_tg_if and TAP ). -| | ... | and one is linux-TAP in namespace. -| | ... | [Ver] Packet sent from TG gets to the destination and ICMP-reply is -| | ... | received on TG. -| | Given Path for 2-node testing is set | ${nodes['TG']} | ${nodes['DUT1']} -| | ... | ${nodes['TG']} -| | And Interfaces in 2-node path are up -| | ${int1}= | And Add Tap Interface | ${dut_node} | ${tap_int1} | -| | And Set Interface Address -| | ... | ${dut_node} | ${int1} | ${tap1_VPP_ip} | ${prefix} -| | And Set Interface Address -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${dut_ip_address} | ${prefix} -| | And Set Interface State | ${dut_node} | ${int1} | up -| | When Create Namespace | ${dut_node} | ${namespace1} -| | And Attach Interface To Namespace | ${dut_node} -| | ... | ${namespace1} | ${tap_int1} -| | And Set Linux Interface MAC | ${dut_node} -| | ... | ${tap_int1} | ${tap1_NM_mac} | ${namespace1} -| | And Set Linux Interface IP | ${dut_node} -| | ... | ${tap_int1} | ${tap1_NM_ip} | ${prefix} | ${namespace1} -| |Â And Add Arp On Dut | ${dut_node} | ${dut_to_tg_if1} -| | ... | ${tg_ip_address} | ${tg_to_dut_if1_mac} -| |Â And Add Arp On Dut | ${dut_node} | ${int1} -| | ... | ${tap1_NM_ip} | ${tap1_NM_mac} -| | And Add Route | ${dut_node} -| | ... | ${tg_ip_address_GW} | ${prefix} | ${tap1_VPP_ip} | ${namespace1} -| | Then Node replies to ICMP echo request | ${tg_node} | ${tg_to_dut_if1} -| | ... | ${dut_to_tg_if1_mac} | ${tg_to_dut_if1_mac} -| | ... | ${tap1_NM_ip} | ${tg_ip_address} - -| TC04: Tap Interface BD - Different Split Horizon +| TC01: Tap Interface BD - Different Split Horizon | | [Documentation] | | ... | [Top] TG-DUT1-TG. | | ... | [Enc] Eth-IPv4-ICMPv4. @@ -235,7 +115,7 @@ | | And Send Ping From Node To Dst | ${dut_node} | ${tap1_NM_ip} | namespace=${namespace2} | | And Send Ping From Node To Dst | ${dut_node} | ${tap2_NM_SHG} | namespace=${namespace1} -| TC05: Tap Interface BD - Same Split Horizon +| TC02: Tap Interface BD - Same Split Horizon | | [Documentation] | | ... | [Top] TG-DUT1-TG. | | ... | [Enc] Eth-IPv4-ICMPv4. @@ -288,29 +168,3 @@ | | ... | ${dut_node} | ${tap2_NM_SHG} | namespace=${namespace1} | | And Run Keyword And Expect Error | Ping Not Successful | Send Ping From Node To Dst | | ... | ${dut_node} | ${tap1_NM_ip} | namespace=${namespace2} - -| TC06: Tap Interface Modify And Delete -| | [Documentation] -| | ... | [Top] TG-DUT1-TG. -| | ... | [Enc] Eth-IPv4-ICMPv4. -| | ... | [Cfg] Set two TAP interfaces. -| | ... | [Ver] Verify that TAP interface can be modified, deleted, and no other -| | ... | TAP interface is affected. -| | Given Path for 2-node testing is set | ${nodes['TG']} | ${nodes['DUT1']} -| | ... | ${nodes['TG']} -| | And Interfaces in 2-node path are up -| | ${int1}= | And Add Tap Interface | ${dut_node} | ${tap_int1} -| | ${int2}= | And Add Tap Interface | ${dut_node} | ${tap_int2} -| | And Set Interface State | ${dut_node} | ${int1} | up -| | And Set Interface State | ${dut_node} | ${int2} | up -| | When Modify Tap Interface | ${dut_node} | ${int1} | ${mod_tap_name} -| | Then Check Tap Present | ${dut_node} | ${mod_tap_name} -| | When Delete Tap Interface | ${dut_node} | ${int1} -| | Then Run Keyword And Expect Error -| | ... | Tap interface :${mod_tap_name} does not exist -| | ... | Check Tap Present | ${dut_node} | ${mod_tap_name} -| | And Check Tap Present | ${dut_node} | ${tap_int2} -| | When Delete Tap Interface | ${dut_node} | ${int2} -| | Then Run Keyword And Expect Error -| | ... | ValueError: No JSON object could be decoded -| | ... | Check Tap Present | ${dut_node} | ${tap_int2} diff --git a/tests/func/tap/eth2p-ethip4-ip4base-eth-1tap-func.robot b/tests/func/tap/eth2p-ethip4-ip4base-eth-1tap-func.robot new file mode 100644 index 0000000000..bd767e704c --- /dev/null +++ b/tests/func/tap/eth2p-ethip4-ip4base-eth-1tap-func.robot @@ -0,0 +1,123 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/default.robot +| Resource | resources/libraries/robot/ipv4.robot +| Resource | resources/libraries/robot/ipv6.robot +| Resource | resources/libraries/robot/interfaces.robot +| Resource | resources/libraries/robot/bridge_domain.robot +| Resource | resources/libraries/robot/testing_path.robot +| Resource | resources/libraries/robot/traffic.robot +| Library | resources.libraries.python.Trace +| Library | resources.libraries.python.Tap +| Library | resources.libraries.python.Namespaces +| Library | resources.libraries.python.IPUtil +| Force Tags | HW_ENV | VM_ENV | 3_NODE_DOUBLE_LINK_TOPO +| Test Setup | Run Keywords | Func Test Setup +| ... | AND | Clean Up Namespaces | ${nodes['DUT1']} +| Test Teardown | Run Keywords | Func Test Teardown +| ... | AND | Clean Up Namespaces | ${nodes['DUT1']} +| Documentation | *Tap Interface Traffic Tests* +| ... | *[Top] Network Topologies:* TG=DUT1 2-node topology with two links +| ... | between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for L2 switching of +| ... | IPv4. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 +| ... | bridge-domain (L2BD) MAC learning enabled; Split Horizon Groups (SHG) +| ... | are set depending on test case; Namespaces (NM) +| ... | are set on DUT1 with attached linux-TAP. +| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets +| ... | are sent by TG on link to DUT1; On receipt TG verifies packets +| ... | for correctness and their IPv4 src-addr, dst-addr, and MAC addresses. +| ... | *[Ref] Applicable standard specifications:* + +*** Variables *** +| ${tap1_VPP_ip}= | 16.0.10.1 +| ${tap1_NM_ip}= | 16.0.10.2 +| ${tap1_NM_mac}= | 02:00:00:00:00:02 +| ${tap_int1}= | tap_int1 + +| ${namespace1}= | nmspace1 + +| ${dut_ip_address}= | 192.168.0.1 +| ${tg_ip_address}= | 192.168.0.2 +| ${tg_ip_address_GW}= | 192.168.0.0 +| ${prefix}= | 24 + +*** Test Cases *** +| TC01: Tap Interface IP Ping Without Namespace +| | [Documentation] +| | ... | [Top] TG-DUT1-TG. +| | ... | [Enc] Eth-IPv4-ICMPv4. +| | ... | [Cfg] On DUT1 configure two interface addresses with IPv4 of which +| | ... | one is TAP interface ( dut_to_tg_if and TAP ). +| | ... | and one is linux-TAP. +| | ... | [Ver] Packet sent from TG gets to the destination and ICMP-reply is +| | ... | received on TG. +| | Given Path for 2-node testing is set | ${nodes['TG']} | ${nodes['DUT1']} +| | ... | ${nodes['TG']} +| | And Interfaces in 2-node path are up +| | ${int1}= | And Add Tap Interface | ${dut_node} | ${tap_int1} | +| | And Set Interface Address +| | ... | ${dut_node} | ${int1} | ${tap1_VPP_ip} | ${prefix} +| | And Set Interface Address +| | ... | ${dut_node} | ${dut_to_tg_if1} | ${dut_ip_address} | ${prefix} +| | And Set Interface State | ${dut_node} | ${int1} | up +| | And Set Linux Interface MAC | ${dut_node} | ${tap_int1} | ${tap1_NM_mac} +| | And Set Linux Interface IP | ${dut_node} +| | ... | ${tap_int1} | ${tap1_NM_ip} | ${prefix} +| | And Add Route | ${dut_node} +| | ... | ${tg_ip_address_GW} | ${prefix} | ${tap1_VPP_ip} +| |Â And Add Arp On Dut | ${dut_node} | ${dut_to_tg_if1} +| | ... | ${tg_ip_address} | ${tg_to_dut_if1_mac} +| |Â And Add Arp On Dut | ${dut_node} | ${int1} +| | ... | ${tap1_NM_ip} | ${tap1_NM_mac} +| | Then Node replies to ICMP echo request | ${tg_node} | ${tg_to_dut_if1} +| | ... | ${dut_to_tg_if1_mac} | ${tg_to_dut_if1_mac} +| | ... | ${tap1_NM_ip} | ${tg_ip_address} + +| TC02: Tap Interface IP Ping With Namespace +| | [Documentation] +| | ... | [Top] TG-DUT1-TG. +| | ... | [Enc] Eth-IPv4-ICMPv4. +| | ... | [Cfg] On DUT1 configure two interface addresses with IPv4 of which +| | ... | one is TAP interface ( dut_to_tg_if and TAP ). +| | ... | and one is linux-TAP in namespace. +| | ... | [Ver] Packet sent from TG gets to the destination and ICMP-reply is +| | ... | received on TG. +| | Given Path for 2-node testing is set | ${nodes['TG']} | ${nodes['DUT1']} +| | ... | ${nodes['TG']} +| | And Interfaces in 2-node path are up +| | ${int1}= | And Add Tap Interface | ${dut_node} | ${tap_int1} | +| | And Set Interface Address +| | ... | ${dut_node} | ${int1} | ${tap1_VPP_ip} | ${prefix} +| | And Set Interface Address +| | ... | ${dut_node} | ${dut_to_tg_if1} | ${dut_ip_address} | ${prefix} +| | And Set Interface State | ${dut_node} | ${int1} | up +| | When Create Namespace | ${dut_node} | ${namespace1} +| | And Attach Interface To Namespace | ${dut_node} +| | ... | ${namespace1} | ${tap_int1} +| | And Set Linux Interface MAC | ${dut_node} +| | ... | ${tap_int1} | ${tap1_NM_mac} | ${namespace1} +| | And Set Linux Interface IP | ${dut_node} +| | ... | ${tap_int1} | ${tap1_NM_ip} | ${prefix} | ${namespace1} +| |Â And Add Arp On Dut | ${dut_node} | ${dut_to_tg_if1} +| | ... | ${tg_ip_address} | ${tg_to_dut_if1_mac} +| |Â And Add Arp On Dut | ${dut_node} | ${int1} +| | ... | ${tap1_NM_ip} | ${tap1_NM_mac} +| | And Add Route | ${dut_node} +| | ... | ${tg_ip_address_GW} | ${prefix} | ${tap1_VPP_ip} | ${namespace1} +| | Then Node replies to ICMP echo request | ${tg_node} | ${tg_to_dut_if1} +| | ... | ${dut_to_tg_if1_mac} | ${tg_to_dut_if1_mac} +| | ... | ${tap1_NM_ip} | ${tg_ip_address} diff --git a/tests/func/telemetry/ipfix_ipv4.robot b/tests/func/telemetry/ipfix/eth2p-ethip4-ip4base-ip4ipfixbase-func.robot index 1c85d1f8a4..f3b02722cc 100644 --- a/tests/func/telemetry/ipfix_ipv4.robot +++ b/tests/func/telemetry/ipfix/eth2p-ethip4-ip4base-ip4ipfixbase-func.robot @@ -21,8 +21,7 @@ | Library | resources.libraries.python.telemetry.IPFIXSetup | Library | resources.libraries.python.Trace -| Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO | EXPECTED_FAILING -# TODO: Remove EXPECTED_FAILING tag once functionality is implemented (VPP-204) +| Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO | Test Setup | Func Test Setup | Test Teardown | Func Test Teardown | Documentation | *IPFIX ipv4 test cases* @@ -41,7 +40,6 @@ | ${prefix_length}= | 24 | ${ip_version}= | ip4 | ${port}= | 80 -| ${sessions}= | 80 *** Test Cases *** | TC01: DUT sends IPFIX template and data packets @@ -199,69 +197,4 @@ | | ... | ${tg_to_dut1} | ${dut1_to_tg} | ${tg_to_dut1_ip} | ${dut1_to_tg_ip} | | ... | port=${port} -| TC06: DUT reports packet flow with a large number of packets -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Cfg] On DUT1 configure IPFIX with TG interface -| | ... | address as collector and add classify session with TG source address. -| | ... | [Ver] Make TG send packets to DUT1, then listen for IPFIX template -| | ... | and data packets, verify that IPFIX reported the received packets. -| | ... | [Ref] RFC 7011 -| | Given Path for 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in 3-node path are up -| | And Set Interface Address | ${dut1_node} -| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length} -| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip} -| | ... | ${tg_to_dut1_mac} -| | ${table_index} | ${skip_n} | ${match_n}= -| | ... | And VPP creates classify table L3 | ${dut1_node} | ${ip_version} | src -| | And VPP configures classify session L3 | ${dut1_node} | permit -| | ... | ${table_index} | ${skip_n} | ${match_n} | ${ip_version} | src -| | ... | ${tg_to_dut1_ip} -| | When Assign interface to flow table | ${dut1_node} | ${dut1_to_tg} -| | ... | ${table_index} | ip_version=${ip_version} -| | And setup IPFIX exporter | ${dut1_node} | ${tg_to_dut1_ip} -| | ... | ${dut1_to_tg_ip} | interval=5 -| | And Set IPFIX stream | ${dut1_node} | ${1} -| | And Assign classify table to exporter | ${dut1_node} | ${table_index} -| | ... | ${ip_version} -| | Then Send packets and verify IPFIX | ${tg_node} | ${dut1_node} -| | ... | ${tg_to_dut1} | ${dut1_to_tg} | ${tg_to_dut1_ip} | ${dut1_to_tg_ip} -| | ... | count=20000 | timeout=10 - -| TC07: DUT reports packet flow when multiple sessions are configured -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Cfg] On DUT1 configure IPFIX with TG interface -| | ... | address as collector and add several classify sessions with different -| | ... | ports. -| | ... | [Ver] Make TG send packets to DUT1 using a range of ports matching -| | ... | configured sessions, then listen for IPFIX template and data packets, -| | ... | verify that IPFIX reported the received packets for each session. -| | ... | [Ref] RFC 7011 -| | Given Path for 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in 3-node path are up -| | And Set Interface Address | ${dut1_node} -| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length} -| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip} -| | ... | ${tg_to_dut1_mac} -| | ${table_index} | ${skip_n} | ${match_n}= -| | ... | And VPP creates classify table L3 | ${dut1_node} | ${ip_version} -| | ... | src proto l4 src_port dst_port -| | :FOR | ${index} | IN RANGE | ${sessions} -| | | VPP configures classify session generic | ${dut1_node} -| | | ... | acl-hit-next permit | ${table_index} | ${skip_n} | ${match_n} -| | | ... | l3 ${ip_version} src ${tg_to_dut1_ip} -| | | ... | proto 6 l4 src_port ${index} dst_port ${index} -| | When Assign interface to flow table | ${dut1_node} | ${dut1_to_tg} -| | ... | ${table_index} | ip_version=${ip_version} -| | And setup IPFIX exporter | ${dut1_node} | ${tg_to_dut1_ip} -| | ... | ${dut1_to_tg_ip} -| | ... | mtu=1450 | interval=5 -| | And Set IPFIX stream | ${dut1_node} | ${1} -| | And Assign classify table to exporter | ${dut1_node} | ${table_index} -| | ... | ${ip_version} -| | Then Send session sweep and verify IPFIX | ${tg_node} | ${dut1_node} -| | ... | ${tg_to_dut1} | ${dut1_to_tg} | ${tg_to_dut1_ip} | ${dut1_to_tg_ip} -| | ... | ${sessions} | timeout=10 | count=3 # TODO: DUT reports packet flow when ACL is configured with wildcards diff --git a/tests/func/telemetry/ipfix/eth2p-ethip4-ip4base-ip4ipfixscale-func.robot b/tests/func/telemetry/ipfix/eth2p-ethip4-ip4base-ip4ipfixscale-func.robot new file mode 100644 index 0000000000..1331f1c883 --- /dev/null +++ b/tests/func/telemetry/ipfix/eth2p-ethip4-ip4base-ip4ipfixscale-func.robot @@ -0,0 +1,110 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/default.robot +| Resource | resources/libraries/robot/interfaces.robot +| Resource | resources/libraries/robot/testing_path.robot +| Resource | resources/libraries/robot/ipv4.robot +| Resource | resources/libraries/robot/telemetry/ipfix.robot +| Library | resources.libraries.python.Classify.Classify +| Library | resources.libraries.python.telemetry.IPFIXSetup +| Library | resources.libraries.python.Trace + +| Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO +| Test Setup | Func Test Setup +| Test Teardown | Func Test Teardown +| Documentation | *IPFIX ipv4 test cases* +| ... +| ... | IPFIX tests use 3-node topology TG - DUT1 - DUT2 - TG with +| ... | one link between the nodes. DUT1 is configured with IPv4 +| ... | routing and static routes. IPFIX is configured on DUT1 with +| ... | DUT1->TG interface as collector. Test packets are +| ... | sent from TG to DUT1. TG listens for flow report packets +| ... | and verifies that they contains flow record of test packets sent. + +*** Variables *** +| ${dut1_to_tg_ip}= | 192.168.1.1 +| ${tg_to_dut1_ip}= | 192.168.1.2 +| ${prefix_length}= | 24 +| ${ip_version}= | ip4 +| ${sessions}= | 80 + +*** Test Cases *** +| TC01: DUT reports packet flow with a large number of packets +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. [Cfg] On DUT1 configure IPFIX with TG interface +| | ... | address as collector and add classify session with TG source address. +| | ... | [Ver] Make TG send packets to DUT1, then listen for IPFIX template +| | ... | and data packets, verify that IPFIX reported the received packets. +| | ... | [Ref] RFC 7011 +| | Given Path for 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in 3-node path are up +| | And Set Interface Address | ${dut1_node} +| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length} +| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip} +| | ... | ${tg_to_dut1_mac} +| | ${table_index} | ${skip_n} | ${match_n}= +| | ... | And VPP creates classify table L3 | ${dut1_node} | ${ip_version} | src +| | And VPP configures classify session L3 | ${dut1_node} | permit +| | ... | ${table_index} | ${skip_n} | ${match_n} | ${ip_version} | src +| | ... | ${tg_to_dut1_ip} +| | When Assign interface to flow table | ${dut1_node} | ${dut1_to_tg} +| | ... | ${table_index} | ip_version=${ip_version} +| | And setup IPFIX exporter | ${dut1_node} | ${tg_to_dut1_ip} +| | ... | ${dut1_to_tg_ip} | interval=5 +| | And Set IPFIX stream | ${dut1_node} | ${1} +| | And Assign classify table to exporter | ${dut1_node} | ${table_index} +| | ... | ${ip_version} +| | Then Send packets and verify IPFIX | ${tg_node} | ${dut1_node} +| | ... | ${tg_to_dut1} | ${dut1_to_tg} | ${tg_to_dut1_ip} | ${dut1_to_tg_ip} +| | ... | count=20000 | timeout=10 + +| TC02: DUT reports packet flow when multiple sessions are configured +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. [Cfg] On DUT1 configure IPFIX with TG interface +| | ... | address as collector and add several classify sessions with different +| | ... | ports. +| | ... | [Ver] Make TG send packets to DUT1 using a range of ports matching +| | ... | configured sessions, then listen for IPFIX template and data packets, +| | ... | verify that IPFIX reported the received packets for each session. +| | ... | [Ref] RFC 7011 +| | Given Path for 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in 3-node path are up +| | And Set Interface Address | ${dut1_node} +| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length} +| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip} +| | ... | ${tg_to_dut1_mac} +| | ${table_index} | ${skip_n} | ${match_n}= +| | ... | And VPP creates classify table L3 | ${dut1_node} | ${ip_version} +| | ... | src proto l4 src_port dst_port +| | :FOR | ${index} | IN RANGE | ${sessions} +| | | VPP configures classify session generic | ${dut1_node} +| | | ... | acl-hit-next permit | ${table_index} | ${skip_n} | ${match_n} +| | | ... | l3 ${ip_version} src ${tg_to_dut1_ip} +| | | ... | proto 6 l4 src_port ${index} dst_port ${index} +| | When Assign interface to flow table | ${dut1_node} | ${dut1_to_tg} +| | ... | ${table_index} | ip_version=${ip_version} +| | And setup IPFIX exporter | ${dut1_node} | ${tg_to_dut1_ip} +| | ... | ${dut1_to_tg_ip} +| | ... | mtu=1450 | interval=5 +| | And Set IPFIX stream | ${dut1_node} | ${1} +| | And Assign classify table to exporter | ${dut1_node} | ${table_index} +| | ... | ${ip_version} +| | Then Send session sweep and verify IPFIX | ${tg_node} | ${dut1_node} +| | ... | ${tg_to_dut1} | ${dut1_to_tg} | ${tg_to_dut1_ip} | ${dut1_to_tg_ip} +| | ... | ${sessions} | timeout=10 | count=3 + +# TODO: DUT reports packet flow when ACL is configured with wildcards diff --git a/tests/func/telemetry/ipfix_ipv6.robot b/tests/func/telemetry/ipfix/eth2p-ethip6-ip6base-ip6ipfixbase-func.robot index b8310b2a13..8451eb6940 100644 --- a/tests/func/telemetry/ipfix_ipv6.robot +++ b/tests/func/telemetry/ipfix/eth2p-ethip6-ip6base-ip6ipfixbase-func.robot @@ -42,7 +42,6 @@ | ${prefix_length}= | 64 | ${ip_version}= | ip6 | ${port}= | 80 -| ${sessions}= | 45 # IPv4 addresses used for IPFIX exporter. Export over IPv6 not (yet?) supported. | ${dut1_to_tg_ip4}= | 192.168.1.1 @@ -195,80 +194,4 @@ | | ... | ${tg_to_dut1} | ${dut1_to_tg} | ${tg_to_dut1_ip} | ${dut1_to_tg_ip} | | ... | port=${port} -| TC05: DUT reports packet flow with a large number of packets -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Cfg] On DUT1 configure IPFIX with TG interface -| | ... | address as collector and add classify session with TG source address. -| | ... | [Ver] Make TG send packets to DUT1, then listen for IPFIX template -| | ... | and data packets, verify that IPFIX reported the received packets. -| | ... | [Ref] RFC 7011 -| | Given Path for 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in 3-node path are up -| | And Set Interface Address | ${dut1_node} -| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length} -| | And Set Interface Address | ${dut1_node} -| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip4} | ${24} -| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip4} -| | ... | ${tg_to_dut1_mac} -| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip} -| | ... | ${tg_to_dut1_mac} -| | And VPP RA suppress link layer | ${dut1_node} | ${dut1_to_tg} -| | ${table_index} | ${skip_n} | ${match_n}= -| | ... | And VPP creates classify table L3 | ${dut1_node} | ${ip_version} | src -| | And VPP configures classify session L3 | ${dut1_node} | permit -| | ... | ${table_index} | ${skip_n} | ${match_n} | ${ip_version} | src -| | ... | ${tg_to_dut1_ip} -| | When Assign interface to flow table | ${dut1_node} | ${dut1_to_tg} -| | ... | ${table_index} | ip_version=${ip_version} -| | And setup IPFIX exporter | ${dut1_node} | ${tg_to_dut1_ip4} -| | ... | ${dut1_to_tg_ip4} | interval=5 -| | And Set IPFIX stream | ${dut1_node} | ${1} -| | And Assign classify table to exporter | ${dut1_node} | ${table_index} -| | ... | ${ip_version} -| | Then Send packets and verify IPFIX | ${tg_node} | ${dut1_node} -| | ... | ${tg_to_dut1} | ${dut1_to_tg} | ${tg_to_dut1_ip} | ${dut1_to_tg_ip} -| | ... | count=20000 | timeout=10 - -| TC06: DUT reports packet flow when multiple sessions are configured -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Cfg] On DUT1 configure IPFIX with TG interface -| | ... | address as collector and add several classify sessions with different -| | ... | ports. -| | ... | [Ver] Make TG send packets to DUT1 using a range of ports matching -| | ... | configured sessions, then listen for IPFIX template and data packets, -| | ... | verify that IPFIX reported the received packets for each session. -| | ... | [Ref] RFC 7011 -| | Given Path for 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in 3-node path are up -| | And Set Interface Address | ${dut1_node} -| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length} -| | And Set Interface Address | ${dut1_node} -| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip4} | ${24} -| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip4} -| | ... | ${tg_to_dut1_mac} -| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip} -| | ... | ${tg_to_dut1_mac} -| | And VPP RA suppress link layer | ${dut1_node} | ${dut1_to_tg} -| | ${table_index} | ${skip_n} | ${match_n}= -| | ... | And VPP creates classify table L3 | ${dut1_node} | ${ip_version} -| | ... | src proto l4 src_port dst_port -| | :FOR | ${index} | IN RANGE | ${sessions} -| | | VPP configures classify session generic | ${dut1_node} -| | | ... | acl-hit-next permit | ${table_index} | ${skip_n} | ${match_n} -| | | ... | l3 ${ip_version} src ${tg_to_dut1_ip} -| | | ... | proto 6 l4 src_port ${index} dst_port ${index} -| | When Assign interface to flow table | ${dut1_node} | ${dut1_to_tg} -| | ... | ${table_index} | ip_version=${ip_version} -| | And setup IPFIX exporter | ${dut1_node} | ${tg_to_dut1_ip4} -| | ... | ${dut1_to_tg_ip4} | interval=5 -| | ... | mtu=1450 | interval=5 -| | And Set IPFIX stream | ${dut1_node} | ${1} -| | And Assign classify table to exporter | ${dut1_node} | ${table_index} -| | ... | ${ip_version} -| | Then Send session sweep and verify IPFIX | ${tg_node} | ${dut1_node} -| | ... | ${tg_to_dut1} | ${dut1_to_tg} | ${tg_to_dut1_ip} | ${dut1_to_tg_ip} -| | ... | ${sessions} | timeout=10 | count=3 - # TODO: DUT reports packet flow when ACL is configured with wildcards diff --git a/tests/func/telemetry/ipfix/eth2p-ethip6-ip6base-ip6ipfixscale-func.robot b/tests/func/telemetry/ipfix/eth2p-ethip6-ip6base-ip6ipfixscale-func.robot new file mode 100644 index 0000000000..125e8b92af --- /dev/null +++ b/tests/func/telemetry/ipfix/eth2p-ethip6-ip6base-ip6ipfixscale-func.robot @@ -0,0 +1,126 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/default.robot +| Resource | resources/libraries/robot/interfaces.robot +| Resource | resources/libraries/robot/testing_path.robot +| Resource | resources/libraries/robot/ipv4.robot +| Resource | resources/libraries/robot/telemetry/ipfix.robot +| Library | resources.libraries.python.Classify.Classify +| Library | resources.libraries.python.telemetry.IPFIXSetup +| Library | resources.libraries.python.IPv6Setup +| Library | resources.libraries.python.Trace + +| Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO | EXPECTED_FAILING +# TODO: Remove EXPECTED_FAILING tag once functionality is implemented (VPP-204) +| Test Setup | Func Test Setup +| Test Teardown | Func Test Teardown +| Documentation | *IPFIX ipv6 test cases* +| ... +| ... | IPFIX tests use 3-node topology TG - DUT1 - DUT2 - TG with +| ... | one link between the nodes. DUT1 is configured with IPv4 and IPV6 +| ... | routing and static routes. IPFIX is configured on DUT1 with +| ... | DUT1->TG interface as collector.Test packets are +| ... | sent from TG to or through DUT1. TG listens for flow report packets +| ... | and verifies that they contains flow records of test packets sent. + +*** Variables *** +| ${dut1_to_tg_ip}= | 10::10 +| ${tg_to_dut1_ip}= | 12::10 +| ${prefix_length}= | 64 +| ${ip_version}= | ip6 +| ${sessions}= | 45 + +# IPv4 addresses used for IPFIX exporter. Export over IPv6 not (yet?) supported. +| ${dut1_to_tg_ip4}= | 192.168.1.1 +| ${tg_to_dut1_ip4}= | 192.168.1.2 + +*** Test Cases *** +| TC01: DUT reports packet flow with a large number of packets +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. [Cfg] On DUT1 configure IPFIX with TG interface +| | ... | address as collector and add classify session with TG source address. +| | ... | [Ver] Make TG send packets to DUT1, then listen for IPFIX template +| | ... | and data packets, verify that IPFIX reported the received packets. +| | ... | [Ref] RFC 7011 +| | Given Path for 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in 3-node path are up +| | And Set Interface Address | ${dut1_node} +| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length} +| | And Set Interface Address | ${dut1_node} +| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip4} | ${24} +| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip4} +| | ... | ${tg_to_dut1_mac} +| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip} +| | ... | ${tg_to_dut1_mac} +| | And VPP RA suppress link layer | ${dut1_node} | ${dut1_to_tg} +| | ${table_index} | ${skip_n} | ${match_n}= +| | ... | And VPP creates classify table L3 | ${dut1_node} | ${ip_version} | src +| | And VPP configures classify session L3 | ${dut1_node} | permit +| | ... | ${table_index} | ${skip_n} | ${match_n} | ${ip_version} | src +| | ... | ${tg_to_dut1_ip} +| | When Assign interface to flow table | ${dut1_node} | ${dut1_to_tg} +| | ... | ${table_index} | ip_version=${ip_version} +| | And setup IPFIX exporter | ${dut1_node} | ${tg_to_dut1_ip4} +| | ... | ${dut1_to_tg_ip4} | interval=5 +| | And Set IPFIX stream | ${dut1_node} | ${1} +| | And Assign classify table to exporter | ${dut1_node} | ${table_index} +| | ... | ${ip_version} +| | Then Send packets and verify IPFIX | ${tg_node} | ${dut1_node} +| | ... | ${tg_to_dut1} | ${dut1_to_tg} | ${tg_to_dut1_ip} | ${dut1_to_tg_ip} +| | ... | count=20000 | timeout=10 + +| TC02: DUT reports packet flow when multiple sessions are configured +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. [Cfg] On DUT1 configure IPFIX with TG interface +| | ... | address as collector and add several classify sessions with different +| | ... | ports. +| | ... | [Ver] Make TG send packets to DUT1 using a range of ports matching +| | ... | configured sessions, then listen for IPFIX template and data packets, +| | ... | verify that IPFIX reported the received packets for each session. +| | ... | [Ref] RFC 7011 +| | Given Path for 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in 3-node path are up +| | And Set Interface Address | ${dut1_node} +| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length} +| | And Set Interface Address | ${dut1_node} +| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip4} | ${24} +| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip4} +| | ... | ${tg_to_dut1_mac} +| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip} +| | ... | ${tg_to_dut1_mac} +| | And VPP RA suppress link layer | ${dut1_node} | ${dut1_to_tg} +| | ${table_index} | ${skip_n} | ${match_n}= +| | ... | And VPP creates classify table L3 | ${dut1_node} | ${ip_version} +| | ... | src proto l4 src_port dst_port +| | :FOR | ${index} | IN RANGE | ${sessions} +| | | VPP configures classify session generic | ${dut1_node} +| | | ... | acl-hit-next permit | ${table_index} | ${skip_n} | ${match_n} +| | | ... | l3 ${ip_version} src ${tg_to_dut1_ip} +| | | ... | proto 6 l4 src_port ${index} dst_port ${index} +| | When Assign interface to flow table | ${dut1_node} | ${dut1_to_tg} +| | ... | ${table_index} | ip_version=${ip_version} +| | And setup IPFIX exporter | ${dut1_node} | ${tg_to_dut1_ip4} +| | ... | ${dut1_to_tg_ip4} | interval=5 +| | ... | mtu=1450 | interval=5 +| | And Set IPFIX stream | ${dut1_node} | ${1} +| | And Assign classify table to exporter | ${dut1_node} | ${table_index} +| | ... | ${ip_version} +| | Then Send session sweep and verify IPFIX | ${tg_node} | ${dut1_node} +| | ... | ${tg_to_dut1} | ${dut1_to_tg} | ${tg_to_dut1_ip} | ${dut1_to_tg_ip} +| | ... | ${sessions} | timeout=10 | count=3 + +# TODO: DUT reports packet flow when ACL is configured with wildcards diff --git a/tests/func/telemetry/span.robot b/tests/func/telemetry/span/eth2p-ethip4-ip4base-spanrx-func.robot index 8a7af5f0d1..62f76d847d 100644 --- a/tests/func/telemetry/span.robot +++ b/tests/func/telemetry/span/eth2p-ethip4-ip4base-spanrx-func.robot @@ -36,8 +36,6 @@ *** Variables *** | ${tg_to_dut_if1_ip4}= | 192.168.1.1 | ${dut_to_tg_if1_ip4}= | 192.168.1.2 -| ${tg_to_dut_if1_ip6}= | 11::1 -| ${dut_to_tg_if1_ip6}= | 10::1 | ${prefix}= | 24 *** Test Cases *** @@ -80,24 +78,3 @@ | | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | | ... | ${dut_to_tg__if1_mac} | ${tg_to_dut_if2} | | ... | ${tg_to_dut_if1_ip4} | ${dut_to_tg_if1_ip4} | ICMP - -| TC03: DUT mirrors IPv6 packets from one interface to another -| | [Documentation] -| | ... | [Top] TG=DUT1 -| | ... | [Cfg] On DUT1 configure IPv6 address, add ARP entry for one TG \ -| | ... | interface and set SPAN mirroring from one DUT interface to the other. -| | ... | [Ver] Make TG send an ICMP packet to DUT through one interface,\ -| | ... | then receive a copy of sent packet and of DUT's ICMP reply\ -| | ... | on the other interface. -| | Given Path For 2-node Testing Is Set | ${nodes['TG']} | ${nodes['DUT1']} -| | ... | ${nodes['TG']} -| | And Interfaces In 2-node Path Are Up -| | And Set interface Address | ${dut_node} | ${dut_to_tg_if1} -| | ... | ${dut_to_tg_if1_ip6} | ${prefix} -| | And Add ARP on DUT | ${dut_node} | ${dut_to_tg_if1} | ${tg_to_dut_if1_ip6} -| | ... | ${tg_to_dut_if1_mac} -| | And Set SPAN Mirroring | ${dut_node} | ${dut_to_tg_if1} | ${dut_to_tg_if2} -| | Then Send Packet And Check Received Copies | ${tg_node} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${dut_to_tg__if1_mac} | ${tg_to_dut_if2} -| | ... | ${tg_to_dut_if1_ip6} | ${dut_to_tg_if1_ip6} | ICMP diff --git a/tests/func/telemetry/span/eth2p-ethip6-ip6base-spanrx-func.robot b/tests/func/telemetry/span/eth2p-ethip6-ip6base-spanrx-func.robot new file mode 100644 index 0000000000..5fa7d0c5e4 --- /dev/null +++ b/tests/func/telemetry/span/eth2p-ethip6-ip6base-spanrx-func.robot @@ -0,0 +1,61 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/default.robot +| Resource | resources/libraries/robot/testing_path.robot +| Resource | resources/libraries/robot/telemetry/span.robot +| Library | resources.libraries.python.Trace +| Library | resources.libraries.python.IPv4Util +| Library | resources.libraries.python.IPv4Setup +| Library | resources.libraries.python.telemetry.SPAN +| Force Tags | HW_ENV | VM_ENV | 3_NODE_DOUBLE_LINK_TOPO | EXPECTED_FAILING +# TODO: Remove EXPECTED_FAILING tag once functionality is implemented (VPP-185) +| Test Setup | Func Test Setup +| Test Teardown | Func Test Teardown +| Documentation | *SPAN test suite* +| ... | *[Top] Network Topologies:* TG=DUT1 2-node topology with two +| ... | links between nodes. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with SPAN mirroring from +| ... | the first DUT1-TG interface to the second one. +| ... | *[Ver] TG verification:* Test ARP or ICMP packets are sent by TG +| ... | on first link to DUT1; On receipt through second link TG verifies +| ... | the copy of packet sent and the copy of DUT's reply packet. +| ... | *[Ref] Applicable standard specifications: None?* + +*** Variables *** +| ${tg_to_dut_if1_ip6}= | 11::1 +| ${dut_to_tg_if1_ip6}= | 10::1 +| ${prefix}= | 24 + +*** Test Cases *** +| TC01: DUT mirrors IPv6 packets from one interface to another +| | [Documentation] +| | ... | [Top] TG=DUT1 +| | ... | [Cfg] On DUT1 configure IPv6 address, add ARP entry for one TG \ +| | ... | interface and set SPAN mirroring from one DUT interface to the other. +| | ... | [Ver] Make TG send an ICMP packet to DUT through one interface,\ +| | ... | then receive a copy of sent packet and of DUT's ICMP reply\ +| | ... | on the other interface. +| | Given Path For 2-node Testing Is Set | ${nodes['TG']} | ${nodes['DUT1']} +| | ... | ${nodes['TG']} +| | And Interfaces In 2-node Path Are Up +| | And Set interface Address | ${dut_node} | ${dut_to_tg_if1} +| | ... | ${dut_to_tg_if1_ip6} | ${prefix} +| | And Add ARP on DUT | ${dut_node} | ${dut_to_tg_if1} | ${tg_to_dut_if1_ip6} +| | ... | ${tg_to_dut_if1_mac} +| | And Set SPAN Mirroring | ${dut_node} | ${dut_to_tg_if1} | ${dut_to_tg_if2} +| | Then Send Packet And Check Received Copies | ${tg_node} +| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} +| | ... | ${dut_to_tg__if1_mac} | ${tg_to_dut_if2} +| | ... | ${tg_to_dut_if1_ip6} | ${dut_to_tg_if1_ip6} | ICMP diff --git a/tests/func/vlan/eth2p-dot1ad--dot1q-l2bdbasemaclrn-vlantrans21-func.robot b/tests/func/vlan/eth2p-dot1ad--dot1q-l2bdbasemaclrn-vlantrans21-func.robot new file mode 100644 index 0000000000..73836c38f0 --- /dev/null +++ b/tests/func/vlan/eth2p-dot1ad--dot1q-l2bdbasemaclrn-vlantrans21-func.robot @@ -0,0 +1,221 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/default.robot +| Resource | resources/libraries/robot/bridge_domain.robot +| Resource | resources/libraries/robot/testing_path.robot +| Resource | resources/libraries/robot/tagging.robot +| Resource | resources/libraries/robot/l2_traffic.robot +| Library | resources.libraries.python.Trace +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | HW_ENV | VM_ENV +| Test Setup | Func Test Setup +| Test Teardown | Func Test Teardown +| Documentation | *L2BD with VLAN tag rewrite test cases - transalte-2-1* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet encapsulations:* Eth-dot1ad-IPv4-ICMPv4 or +| ... | Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1, Eth-dot1q-IPv4-ICMPv4 or +| ... | Eth-dot1q-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv4-ICMPv4 or Eth-IPv6-ICMPv6 +| ... | on TG-DUT2 for L2 switching of IPv4/IPv6. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with bridge domain (L2BD) +| ... | switching combined with MAC learning enabled and added VLAN +| ... | sub-interface with VLAN tag rewrite translate-2-1 method of interface +| ... | towards TG and interface towards DUT2. DUT2 is configured with L2 +| ... | bridge domain (L2BD) switching between VLAN sub-interface with VLAN tag +| ... | rewrite pop-1 method of interface towards DUT1 and interface towards TG. +| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are +| ... | sent from TG on link to DUT1 and received in TG on link form DUT2; +| ... | on receive TG verifies packets for correctness and their IPv4 src-addr, +| ... | dst-addr and MAC addresses. +| ... | *[Ref] Applicable standard specifications:* IEEE 802.1q, IEEE 802.1ad. + +*** Variables *** +| ${bd_id1}= | 1 + +| ${subid}= | 10 + +| ${outer_vlan_id1}= | 110 +| ${outer_vlan_id2}= | 120 +| ${outer_vlan_wrong}= | 150 + +| ${inner_vlan_id1}= | 210 + +| ${src_ip6}= | 3ffe:63::1 +| ${dst_ip6}= | 3ffe:63::2 + +*** Test Cases *** +| TC01: DUT1 and DUT2 with L2BD and VLAN translate-2-1 (DUT1) switch ICMPv4 between two TG links +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv4-ICMPv4 on TG-DUT1, \ +| | ... | Eth-dot1q-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. +| | ... | [Cfg] On DUT1 configure L2 bridge domain (L2BD) with one interface to +| | ... | DUT2 and one Dot1ad sub-interface towards TG with VLAN tag rewrite +| | ... | translate-2-1 method; on DUT2 configure L2 bridge domain (L2BD) with +| | ... | one interface to TG and one VLAN sub-interface towards DUT1 with +| | ... | VLAN tag rewrite pop-1 method. [Ver] Make TG send ICMPv4 Echo Req +| | ... | tagged with Dot1ad tags from one of its interfaces to another one +| | ... | via DUT1 and DUT2; verify that packet is received. +| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad +| | Given Path for 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in 3-node path are up +| | ${vlan1_name} | ${vlan1_index}= | When Tagged Subinterface Created +| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} +| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} +| | ... | type_subif=two_tags dot1ad +| | ${vlan2_name} | ${vlan2_index}= | And Vlan Subinterface Created +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${outer_vlan_id2} +| | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node} +| | ... | ${vlan1_index} | translate-2-1 | tag1_id=${outer_vlan_id2} +| | And L2 Tag Rewrite Method Is Set On Interface | ${dut2_node} +| | ... | ${vlan2_index} | pop-1 +| | And Bridge domain on DUT node is created | ${dut1_node} | ${bd_id1} +| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_dut2} +| | ... | ${bd_id1} +| | And Interface is added to bridge domain | ${dut1_node} | ${vlan1_index} +| | ... | ${bd_id1} +| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id1} +| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg} +| | ... | ${bd_id1} +| | And Interface is added to bridge domain | ${dut2_node} | ${vlan2_index} +| | ... | ${bd_id1} +| | Then Send and receive ICMP Packet +| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} | encaps=Dot1ad +| | ... | vlan1=${outer_vlan_id1} | vlan2=${inner_vlan_id1} + +| TC02: DUT1 and DUT2 with L2BD and VLAN translate-2-1 with wrong tag used (DUT1) switch ICMPv4 between two TG links +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv4-ICMPv4 on TG-DUT1, \ +| | ... | Eth-dot1q-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. +| | ... | [Cfg] On DUT1 configure L2 bridge domain (L2BD) with one interface to +| | ... | DUT2 and one Dot1ad sub-interface towards TG with VLAN tag rewrite +| | ... | translate-2-1 method to set tag different from tag set on VLAN +| | ... | sub-interface of DUT2; on DUT2 configure L2 bridge domain (L2BD) with +| | ... | one interface to TG and one VLAN sub-interface towards DUT1 with +| | ... | VLAN tag rewrite pop-1 method. [Ver] Make TG send ICMPv4 Echo Req +| | ... | tagged with Dot1ad tags from one of its interfaces to another one +| | ... | via DUT1 and DUT2; verify that packet is not received. +| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad +| | [Tags] | SKIP_PATCH +| | Given Path for 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in 3-node path are up +| | ${vlan1_name} | ${vlan1_index}= | When Tagged Subinterface Created +| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} +| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} +| | ... | type_subif=two_tags dot1ad +| | ${vlan2_name} | ${vlan2_index}= | And Vlan Subinterface Created +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${outer_vlan_id2} +| | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node} +| | ... | ${vlan1_index} | translate-2-1 | tag1_id=${outer_vlan_wrong} +| | And L2 Tag Rewrite Method Is Set On Interface | ${dut2_node} +| | ... | ${vlan2_index} | pop-1 +| | And Bridge domain on DUT node is created | ${dut1_node} | ${bd_id1} +| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_dut2} +| | ... | ${bd_id1} +| | And Interface is added to bridge domain | ${dut1_node} | ${vlan1_index} +| | ... | ${bd_id1} +| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id1} +| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg} +| | ... | ${bd_id1} +| | And Interface is added to bridge domain | ${dut2_node} | ${vlan2_index} +| | ... | ${bd_id1} +| | Then Run Keyword And Expect Error | ICMP echo Rx timeout +| | ... | Send and receive ICMP Packet | ${tg_node} | ${tg_to_dut1} +| | ... | ${tg_to_dut2} | encaps=Dot1ad | vlan1=${outer_vlan_id1} +| | ... | vlan2=${inner_vlan_id1} + + +| TC03: DUT1 and DUT2 with L2BD and VLAN translate-2-1 (DUT1) switch ICMPv6 between two TG links +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1, \ +| | ... | Eth-dot1q-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. +| | ... | [Cfg] On DUT1 configure L2 bridge domain (L2BD) with one interface to +| | ... | DUT2 and one Dot1ad sub-interface towards TG with VLAN tag rewrite +| | ... | translate-2-1 method; on DUT2 configure L2 bridge domain (L2BD) with +| | ... | one interface to TG and one VLAN sub-interface towards DUT1 with +| | ... | VLAN tag rewrite pop-1 method. [Ver] Make TG send ICMPv6 Echo Req +| | ... | tagged with Dot1ad tags from one of its interfaces to another one +| | ... | via DUT1 and DUT2; verify that packet is received. +| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad +| | Given Path for 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in 3-node path are up +| | ${vlan1_name} | ${vlan1_index}= | When Tagged Subinterface Created +| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} +| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} +| | ... | type_subif=two_tags dot1ad +| | ${vlan2_name} | ${vlan2_index}= | And Vlan Subinterface Created +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${outer_vlan_id2} +| | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node} +| | ... | ${vlan1_index} | translate-2-1 | tag1_id=${outer_vlan_id2} +| | And L2 Tag Rewrite Method Is Set On Interface | ${dut2_node} +| | ... | ${vlan2_index} | pop-1 +| | And Bridge domain on DUT node is created | ${dut1_node} | ${bd_id1} +| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_dut2} +| | ... | ${bd_id1} +| | And Interface is added to bridge domain | ${dut1_node} | ${vlan1_index} +| | ... | ${bd_id1} +| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id1} +| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg} +| | ... | ${bd_id1} +| | And Interface is added to bridge domain | ${dut2_node} | ${vlan2_index} +| | ... | ${bd_id1} +| | Then Send and receive ICMP Packet +| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} | src_ip=${src_ip6} +| | ... | dst_ip=${dst_ip6} | encaps=Dot1ad | vlan1=${outer_vlan_id1} +| | ... | vlan2=${inner_vlan_id1} + +| TC04: DUT1 and DUT2 with L2BD and VLAN translate-2-1 with wrong tag used (DUT1) switch ICMPv6 between two TG links +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1, \ +| | ... | Eth-dot1q-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. +| | ... | [Cfg] On DUT1 configure L2 bridge domain (L2BD) with one interface to +| | ... | DUT2 and one Dot1ad sub-interface towards TG with VLAN tag rewrite +| | ... | translate-2-1 method to set tag different from tag set on VLAN +| | ... | sub-interface of DUT2; on DUT2 configure L2 bridge domain (L2BD) with +| | ... | one interface to TG and one VLAN sub-interface towards DUT1 with +| | ... | VLAN tag rewrite pop-1 method. [Ver] Make TG send ICMPv6 Echo Req +| | ... | tagged with Dot1ad tags from one of its interfaces to another one +| | ... | via DUT1 and DUT2; verify that packet is not received. +| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad +| | [Tags] | SKIP_PATCH +| | Given Path for 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in 3-node path are up +| | ${vlan1_name} | ${vlan1_index}= | When Tagged Subinterface Created +| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} +| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} +| | ... | type_subif=two_tags dot1ad +| | ${vlan2_name} | ${vlan2_index}= | And Vlan Subinterface Created +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${outer_vlan_id2} +| | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node} +| | ... | ${vlan1_index} | translate-2-1 | tag1_id=${outer_vlan_wrong} +| | And L2 Tag Rewrite Method Is Set On Interface | ${dut2_node} +| | ... | ${vlan2_index} | pop-1 +| | And Bridge domain on DUT node is created | ${dut1_node} | ${bd_id1} +| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_dut2} +| | ... | ${bd_id1} +| | And Interface is added to bridge domain | ${dut1_node} | ${vlan1_index} +| | ... | ${bd_id1} +| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id1} +| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg} +| | ... | ${bd_id1} +| | And Interface is added to bridge domain | ${dut2_node} | ${vlan2_index} +| | ... | ${bd_id1} +| | Then Run Keyword And Expect Error | ICMP echo Rx timeout +| | ... | Send and receive ICMP Packet | ${tg_node} | ${tg_to_dut1} +| | ... | ${tg_to_dut2} | src_ip=${src_ip6} | dst_ip=${dst_ip6} | encaps=Dot1ad +| | ... | vlan1=${outer_vlan_id1} | vlan2=${inner_vlan_id1} diff --git a/tests/func/vlan/eth2p-dot1ad--dot1q-l2xcbase-vlantrans21-func.robot b/tests/func/vlan/eth2p-dot1ad--dot1q-l2xcbase-vlantrans21-func.robot new file mode 100644 index 0000000000..0e2749c5c9 --- /dev/null +++ b/tests/func/vlan/eth2p-dot1ad--dot1q-l2xcbase-vlantrans21-func.robot @@ -0,0 +1,189 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/default.robot +| Resource | resources/libraries/robot/testing_path.robot +| Resource | resources/libraries/robot/tagging.robot +| Resource | resources/libraries/robot/l2_traffic.robot +| Library | resources.libraries.python.Trace +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | HW_ENV | VM_ENV +| Test Setup | Func Test Setup +| Test Teardown | Func Test Teardown +| Documentation | *L2XC with VLAN tag rewrite test cases - translate-2-1* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet encapsulations:* Eth-dot1ad-IPv4-ICMPv4 or +| ... | Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1, Eth-dot1q-IPv4-ICMPv4 or +| ... | Eth-dot1aq-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2 +| ... | for L2 switching of IPv4/IPv6. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 cross-connect +| ... | (L2XC) switching between VLAN sub-interface with VLAN tag rewrite +| ... | translate-2-1 method of interface towards TG and interface towards DUT2. +| ... | DUT2 is configured configured with L2 cross-connect (L2XC) switching +| ... | between VLAN sub-interface with VLAN tag rewrite pop-1 method +| ... | of interface towards DUT1 and interface towards TG. +| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are +| ... | sent from TG on link to DUT1 and received in TG on link form DUT2; +| ... | on receive TG verifies packets for correctness and their IPv4 src-addr, +| ... | dst-addr and MAC addresses. +| ... | *[Ref] Applicable standard specifications:* IEEE 802.1q, IEEE 802.1ad. + +*** Variables *** +| ${subid}= | 10 + +| ${outer_vlan_id1}= | 110 +| ${outer_vlan_id2}= | 120 +| ${outer_vlan_wrong}= | 150 + +| ${inner_vlan_id1}= | 210 + +| ${src_ip}= | 3ffe:63::1 +| ${dst_ip}= | 3ffe:63::2 + +*** Test Cases *** +| TC01: DUT1 and DUT2 with L2XC and VLAN translate-2-1 (DUT1) switch ICMPv4 between two TG links +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv4-ICMPv4 on TG-DUT1, \ +| | ... | Eth-dot1q-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. +| | ... | [Cfg] On DUT1 configure L2 cross-connect (L2XC) with one interface to +| | ... | DUT2 and one Dot1ad sub-interface towards TG with VLAN tag rewrite +| | ... | translate-2-1 method; on DUT2 configure L2 cross-connect (L2XC) with +| | ... | one interface to TG and one VLAN sub-interface towards DUT1 with +| | ... | VLAN tag rewrite pop-1 method. [Ver] Make TG send ICMPv4 Echo Req +| | ... | tagged with Dot1ad tags from one of its interfaces to another one +| | ... | via DUT1 and DUT2; verify that packet is received. +| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad +| | Given Path for 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in 3-node path are up +| | ${vlan1_name} | ${vlan1_index}= | When Tagged Subinterface Created +| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} +| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} +| | ... | type_subif=two_tags dot1ad +| | ${vlan2_name} | ${vlan2_index}= | And Vlan Subinterface Created +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${outer_vlan_id2} +| | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node} +| | ... | ${vlan1_index} | translate-2-1 | tag1_id=${outer_vlan_id2} +| | And L2 Tag Rewrite Method Is Set On Interface | ${dut2_node} +| | ... | ${vlan2_index} | pop-1 +| | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index} +| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index} +| | Then Send and receive ICMP Packet +| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} | encaps=Dot1ad +| | ... | vlan1=${outer_vlan_id1} | vlan2=${inner_vlan_id1} + +| TC02: DUT1 and DUT2 with L2XC and VLAN translate-2-1 with wrong tag used (DUT1) switch ICMPv4 between two TG links +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv4-ICMPv4 on TG-DUT1, \ +| | ... | Eth-dot1q-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. +| | ... | [Cfg] On DUT1 configure L2 cross-connect (L2XC) with one interface to +| | ... | DUT2 and one Dot1ad sub-interface towards TG with VLAN tag rewrite +| | ... | translate-2-1 method to set tag different from tag set on VLAN +| | ... | sub-interface of DUT2; on DUT2 configure L2 cross-connect (L2XC) with +| | ... | one interface to TG and one VLAN sub-interface towards DUT1 with +| | ... | VLAN tag rewrite pop-1 method. [Ver] Make TG send ICMPv4 Echo Req +| | ... | tagged with Dot1ad tags from one of its interfaces to another one +| | ... | via DUT1 and DUT2; verify that packet is not received. +| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad +| | [Tags] | SKIP_PATCH +| | Given Path for 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in 3-node path are up +| | ${vlan1_name} | ${vlan1_index}= | When Tagged Subinterface Created +| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} +| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} +| | ... | type_subif=two_tags dot1ad +| | ${vlan2_name} | ${vlan2_index}= | And Vlan Subinterface Created +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${outer_vlan_id2} +| | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node} +| | ... | ${vlan1_index} | translate-2-1 | tag1_id=${outer_vlan_wrong} +| | And L2 Tag Rewrite Method Is Set On Interface | ${dut2_node} +| | ... | ${vlan2_index} | pop-1 +| | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index} +| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index} +| | Then Run Keyword And Expect Error | ICMP echo Rx timeout +| | ... | Send and receive ICMP Packet | ${tg_node} | ${tg_to_dut1} +| | ... | ${tg_to_dut2} | encaps=Dot1ad | vlan1=${outer_vlan_id1} +| | ... | vlan2=${inner_vlan_id1} + +| TC03: DUT1 and DUT2 with L2XC and VLAN translate-2-1 (DUT1) switch ICMPv6 between two TG links +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1, \ +| | ... | Eth-dot1q-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. +| | ... | [Cfg] On DUT1 configure L2 cross-connect (L2XC) with one interface to +| | ... | DUT2 and one Dot1ad sub-interface towards TG with VLAN tag rewrite +| | ... | translate-2-1 method; on DUT2 configure L2 cross-connect (L2XC) with +| | ... | one interface to TG and one VLAN sub-interface towards DUT1 with +| | ... | VLAN tag rewrite pop-1 method. [Ver] Make TG send ICMPv6 Echo Req +| | ... | tagegd with Dot1ad tags from one of its interfaces to another one +| | ... | via DUT1 and DUT2; verify that packet is received. +| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad +| | Given Path for 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in 3-node path are up +| | ${vlan1_name} | ${vlan1_index}= | When Tagged Subinterface Created +| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} +| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} +| | ... | type_subif=two_tags dot1ad +| | ${vlan2_name} | ${vlan2_index}= | And Vlan Subinterface Created +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${outer_vlan_id2} +| | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node} +| | ... | ${vlan1_index} | translate-2-1 | tag1_id=${outer_vlan_id2} +| | And L2 Tag Rewrite Method Is Set On Interface | ${dut2_node} +| | ... | ${vlan2_index} | pop-1 +| | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index} +| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index} +| | Then Send and receive ICMP Packet +| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} | src_ip=${src_ip} +| | ... | dst_ip=${dst_ip} | encaps=Dot1ad | vlan1=${outer_vlan_id1} +| | ... | vlan2=${inner_vlan_id1} + +| TC04: DUT1 and DUT2 with L2XC and VLAN translate-2-1 with wrong tag used (DUT1) switch ICMPv6 between two TG links +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1, \ +| | ... | Eth-dot1q-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. +| | ... | [Cfg] On DUT1 configure L2 cross-connect (L2XC) with one interface to +| | ... | DUT2 and one Dot1ad sub-interface towards TG with VLAN tag rewrite +| | ... | translate-2-1 method to set tag different from tag set on VLAN +| | ... | sub-interface of DUT2; on DUT2 configure L2 cross-connect (L2XC) with +| | ... | one interface to TG and one VLAN sub-interface towards DUT1 with +| | ... | VLAN tag rewrite pop-1 method. [Ver] Make TG send ICMPv6 Echo Req +| | ... | tagegd with Dot1ad tags from one of its interfaces to another one +| | ... | via DUT1 and DUT2; verify that packet is not received. +| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad +| | [Tags] | SKIP_PATCH +| | Given Path for 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in 3-node path are up +| | ${vlan1_name} | ${vlan1_index}= | When Tagged Subinterface Created +| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} +| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} +| | ... | type_subif=two_tags dot1ad +| | ${vlan2_name} | ${vlan2_index}= | And Vlan Subinterface Created +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${outer_vlan_id2} +| | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node} +| | ... | ${vlan1_index} | translate-2-1 | tag1_id=${outer_vlan_wrong} +| | And L2 Tag Rewrite Method Is Set On Interface | ${dut2_node} +| | ... | ${vlan2_index} | pop-1 +| | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index} +| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index} +| | Then Run Keyword And Expect Error | ICMP echo Rx timeout +| | ... | Send and receive ICMP Packet | ${tg_node} | ${tg_to_dut1} +| | ... | ${tg_to_dut2} | src_ip=${src_ip} | dst_ip=${dst_ip} | encaps=Dot1ad +| | ... | vlan1=${outer_vlan_id1} | vlan2=${inner_vlan_id1} diff --git a/tests/func/vlan/vlan_tag_translate_l2_bridge_domain_ipv4.robot b/tests/func/vlan/eth2p-dot1ad-l2bdbasemaclrn-vlantrans22-func.robot index ebde7bf1c1..4efa90d419 100644 --- a/tests/func/vlan/vlan_tag_translate_l2_bridge_domain_ipv4.robot +++ b/tests/func/vlan/eth2p-dot1ad-l2bdbasemaclrn-vlantrans22-func.robot @@ -21,20 +21,19 @@ | Force Tags | 3_NODE_SINGLE_LINK_TOPO | HW_ENV | VM_ENV | Test Setup | Func Test Setup | Test Teardown | Func Test Teardown -| Documentation | *L2 bridge domain with VLAN tag rewrite test cases - IPv4* +| Documentation | *L2BD with VLAN tag rewrite test cases - translate-2-2* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology | ... | with single links between nodes. -| ... | *[Enc] Packet encapsulations:* Eth-dot1q-IPv4-ICMPv4 or -| ... | Eth-dot1ad-IPv4-ICMPv4 on TG-DUT1 and DUT1-DUT2, Eth-IPv4-ICMPv4 -| ... | on TG-DUT2 for L2 switching of IPv4. +| ... | *[Enc] Packet encapsulations:* Eth-dot1ad-IPv4-ICMPv4 or +| ... | Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1 and DUT1-DUT2, Eth-IPv4-ICMPv4 or +| ... | Eth-IPv6-ICMPv6 on TG-DUT2 for L2 switching of IPv4/IPv6. | ... | *[Cfg] DUT configuration:* DUT1 is configured with bridge domain (L2BD) | ... | switching combined with MAC learning enabled and added VLAN -| ... | sub-interface with VLAN tag rewrite translate-1-1 method -| ... | of interface towards TG and interface towards DUT2. DUT2 is configured -| ... | with L2 bridge domain (L2BD) switching between VLAN sub-interface -| ... | with VLAN tag rewrite pop-1 method of interface towards DUT1 and -| ... | interface towards TG. +| ... | sub-interface with VLAN tag rewrite translate-2-2 method of interface +| ... | towards TG and interface towards DUT2. DUT2 is configured with L2 +| ... | bridge domain (L2BD) switching between VLAN sub-interface with VLAN tag +| ... | rewrite pop-2 method of interface towards DUT1 and interface towards TG. | ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are | ... | sent from TG on link to DUT1 and received in TG on link form DUT2; | ... | on receive TG verifies packets for correctness and their IPv4 src-addr, @@ -54,104 +53,34 @@ | ${inner_vlan_id2}= | 220 | ${inner_vlan_wrong}= | 250 -*** Test Cases *** -| TC01: DUT1 and DUT2 with L2BD and VLAN translate-1-1 (DUT1) switch ICMPv4 between two TG links -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv4-ICMPv4 on TG-DUT1 and \ -| | ... | DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. [Cfg] On DUT1 configure L2 -| | ... | bridge domain with one interface to DUT2 and one VLAN -| | ... | sub-interface towards TG with VLAN tag rewrite translate-1-1 method; -| | ... | on DUT2 configure L2 bridge domain (L2BD) with one interface to TG -| | ... | and one VLAN sub-interface towards DUT1 with VLAN tag rewrite pop-1 -| | ... | method. [Ver] Make TG send ICMPv4 Echo Req tagged with one Dot1q tag -| | ... | from one of its interfaces to another one via DUT1 and DUT2; verify -| | ... | that packet is received. [Ref] IEEE 802.1q -| | Given Path for 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in 3-node path are up -| | ${vlan1_name} | ${vlan1_index}= | When Vlan Subinterface Created -| | ... | ${dut1_node} | ${dut1_to_tg} | ${outer_vlan_id1} -| | ${vlan2_name} | ${vlan2_index}= | And Vlan Subinterface Created -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${outer_vlan_id2} -| | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node} -| | ... | ${vlan1_index} | translate-1-1 | tag1_id=${outer_vlan_id2} -| | And L2 Tag Rewrite Method Is Set On Interface | ${dut2_node} -| | ... | ${vlan2_index} | pop-1 -| | And Bridge domain on DUT node is created | ${dut1_node} | ${bd_id1} -| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_dut2} -| | ... | ${bd_id1} -| | And Interface is added to bridge domain | ${dut1_node} | ${vlan1_index} -| | ... | ${bd_id1} -| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id1} -| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg} -| | ... | ${bd_id1} -| | And Interface is added to bridge domain | ${dut2_node} | ${vlan2_index} -| | ... | ${bd_id1} -| | Then Send and receive ICMP Packet -| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} | encaps=Dot1q -| | ... | vlan1=${outer_vlan_id1} - -| TC02: DUT1 and DUT2 with L2BD and VLAN translate-1-1 with wrong tag used (DUT1) switch ICMPv4 between two TG links -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv4-ICMPv4 on TG-DUT1 and \ -| | ... | DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. [Cfg] On DUT1 configure L2 -| | ... | bridge domain (L2BD) with one interface to DUT2 and one VLAN -| | ... | sub-interface towards TG with VLAN tag rewrite translate-1-1 method -| | ... | to set tag different from tag set on VLAN sub-interface of DUT2; -| | ... | on DUT2 configure L2 bridge domain (L2BD) with one interface to TG -| | ... | and one VLAN sub-interface towards DUT1 with VLAN tag rewrite pop-1 -| | ... | method. [Ver] Make TG send ICMPv4 Echo Req tagged with one Dot1q tag -| | ... | from one of its interfaces to another one via DUT1 and DUT2; verify -| | ... | that packet is not received. [Ref] IEEE 802.1q -| | [Tags] | SKIP_PATCH -| | Given Path for 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in 3-node path are up -| | ${vlan1_name} | ${vlan1_index}= | When Vlan Subinterface Created -| | ... | ${dut1_node} | ${dut1_to_tg} | ${outer_vlan_id1} -| | ${vlan2_name} | ${vlan2_index}= | And Vlan Subinterface Created -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${outer_vlan_id2} -| | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node} -| | ... | ${vlan1_index} | translate-1-1 | tag1_id=${outer_vlan_wrong} -| | And L2 Tag Rewrite Method Is Set On Interface | ${dut2_node} -| | ... | ${vlan2_index} | pop-1 -| | And Bridge domain on DUT node is created | ${dut1_node} | ${bd_id1} -| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_dut2} -| | ... | ${bd_id1} -| | And Interface is added to bridge domain | ${dut1_node} | ${vlan1_index} -| | ... | ${bd_id1} -| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id1} -| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg} -| | ... | ${bd_id1} -| | And Interface is added to bridge domain | ${dut2_node} | ${vlan2_index} -| | ... | ${bd_id1} -| | Then Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Send and receive ICMP Packet | ${tg_node} | ${tg_to_dut1} -| | ... | ${tg_to_dut2} | encaps=Dot1q | vlan1=${outer_vlan_id1} +| ${src_ip6}= | 3ffe:63::1 +| ${dst_ip6}= | 3ffe:63::2 -| TC03: DUT1 and DUT2 with L2BD and VLAN translate-1-2 (DUT1) switch ICMPv4 between two TG links +*** Test Cases *** +| TC01: DUT1 and DUT2 with L2BD and VLAN translate-2-2 switch ICMPv4 between two TG links | | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv4-ICMPv4 on TG-DUT1, \ -| | ... | Eth-dot1ad-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. -| | ... | [Cfg] On DUT1 configure L2 bridge domain (L2BD) with one interface to -| | ... | DUT2 and one VLAN sub-interface towards TG with VLAN tag rewrite -| | ... | translate-1-2 method; on DUT2 configure L2 bridge domain (L2BD) with -| | ... | one interface to TG and one Dot1ad sub-interface towards DUT1 with -| | ... | VLAN tag rewrite pop-2 method. [Ver] Make TG send ICMPv4 Echo Req -| | ... | tagged with one Dot1q tag from one of its interfaces to another one -| | ... | via DUT1 and DUT2; verify that packet is received. -| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv4-ICMPv4 on TG-DUT1 and \ +| | ... | on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. [Cfg] On DUT1 configure L2 +| | ... | bridge domain (L2BD) with one interface to DUT2 and one Dot1ad +| | ... | sub-interface towards TG with VLAN tag rewrite translate-2-2 method; +| | ... | on DUT2 configure L2 bridge domain (L2BD) with one interface to TG and +| | ... | one Dot1ad sub-interface towards DUT1 with VLAN tag rewrite pop-2 +| | ... | tagged with Dot1ad tags from one of its interfaces to another one +| | ... | method. [Ver] Make TG send ICMPv4 Echo Req via DUT1 and DUT2; verify +| | ... | that packet is received. [Ref] IEEE 802.1ad | | Given Path for 3-node testing is set | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} | | And Interfaces in 3-node path are up -| | ${vlan1_name} | ${vlan1_index}= | When Vlan Subinterface Created -| | ... | ${dut1_node} | ${dut1_to_tg} | ${outer_vlan_id1} +| | ${vlan1_name} | ${vlan1_index}= | When Tagged Subinterface Created +| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} +| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} +| | ... | type_subif=two_tags dot1ad | | ${vlan2_name} | ${vlan2_index}= | And Tagged Subinterface Created | | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} | | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2} | | ... | type_subif=two_tags dot1ad | | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node} -| | ... | ${vlan1_index} | translate-1-2 | push_dot1q=${False} +| | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False} | | ... | tag1_id=${outer_vlan_id2} | tag2_id=${inner_vlan_id2} | | And L2 Tag Rewrite Method Is Set On Interface | ${dut2_node} | | ... | ${vlan2_index} | pop-2 @@ -166,34 +95,35 @@ | | And Interface is added to bridge domain | ${dut2_node} | ${vlan2_index} | | ... | ${bd_id1} | | Then Send and receive ICMP Packet -| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} | encaps=Dot1q -| | ... | vlan1=${outer_vlan_id1} +| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} | encaps=Dot1ad +| | ... | vlan1=${outer_vlan_id1} | vlan2=${inner_vlan_id1} -| TC04: DUT1 and DUT2 with L2BD and VLAN translate-1-2 with wrong inner tag used (DUT1) switch ICMPv4 between two TG links +| TC02: DUT1 and DUT2 with L2BD and VLAN translate-2-2 with wrong inner tag used (DUT1) switch ICMPv4 between two TG links | | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv4-ICMPv4 on TG-DUT1, \ -| | ... | Eth-dot1ad-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. -| | ... | [Cfg] On DUT1 configure L2 bridge domain (L2BD) with one interface to -| | ... | DUT2 and one VLAN sub-interface towards TG with VLAN tag rewrite -| | ... | translate-1-2 method to set inner tag different from inner tag set on -| | ... | Dot1ad sub-interface of DUT2; on DUT2 configure L2 bridge domain with -| | ... | one interface to TG and one Dot1ad sub-interface towards DUT1 with -| | ... | VLAN tag rewrite pop-2 method. [Ver] Make TG send ICMPv4 Echo Req -| | ... | tagged with one Dot1q tag from one of its interfaces to another one -| | ... | via DUT1 and DUT2; verify that packet is not received. -| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv4-ICMPv4 on TG-DUT1 and \ +| | ... | on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. [Cfg] On DUT1 configure L2 +| | ... | bridge domain (L2BD) with one interface to DUT2 and one Dot1ad +| | ... | sub-interface towards TG with VLAN tag rewrite translate-2-2 method to +| | ... | set inner tag different from inner tag set on Dot1ad sub-interface of +| | ... | DUT2; on DUT2 configure L2 bridge domain (L2BD) with one interface to +| | ... | TG and one Dot1ad sub-interface towards DUT1 with VLAN tag rewrite +| | ... | pop-2 tagged with Dot1ad tags from one of its interfaces to another +| | ... | one method. [Ver] Make TG send ICMPv4 Echo Req via DUT1 and DUT2; +| | ... | verify that packet is not received. [Ref] IEEE 802.1ad | | [Tags] | SKIP_PATCH | | Given Path for 3-node testing is set | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} | | And Interfaces in 3-node path are up -| | ${vlan1_name} | ${vlan1_index}= | When Vlan Subinterface Created -| | ... | ${dut1_node} | ${dut1_to_tg} | ${outer_vlan_id1} +| | ${vlan1_name} | ${vlan1_index}= | When Tagged Subinterface Created +| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} +| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} +| | ... | type_subif=two_tags dot1ad | | ${vlan2_name} | ${vlan2_index}= | And Tagged Subinterface Created | | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} | | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2} | | ... | type_subif=two_tags dot1ad | | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node} -| | ... | ${vlan1_index} | translate-1-2 | push_dot1q=${False} +| | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False} | | ... | tag1_id=${outer_vlan_id2} | tag2_id=${inner_vlan_wrong} | | And L2 Tag Rewrite Method Is Set On Interface | ${dut2_node} | | ... | ${vlan2_index} | pop-2 @@ -209,33 +139,35 @@ | | ... | ${bd_id1} | | Then Run Keyword And Expect Error | ICMP echo Rx timeout | | ... | Send and receive ICMP Packet | ${tg_node} | ${tg_to_dut1} -| | ... | ${tg_to_dut2} | encaps=Dot1q | vlan1=${outer_vlan_id1} +| | ... | ${tg_to_dut2} | encaps=Dot1ad | vlan1=${outer_vlan_id1} +| | ... | vlan2=${inner_vlan_id1} -| TC05: DUT1 and DUT2 with L2BD and VLAN translate-1-2 with wrong outer tag used (DUT1) switch ICMPv4 between two TG links +| TC03: DUT1 and DUT2 with L2BD and VLAN translate-2-2 with wrong outer tag used (DUT1) switch ICMPv4 between two TG links | | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv4-ICMPv4 on TG-DUT1, \ -| | ... | Eth-dot1ad-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. -| | ... | [Cfg] On DUT1 configure L2 bridge domain (L2BD) with one interface to -| | ... | DUT2 and one VLAN sub-interface towards TG with VLAN tag rewrite -| | ... | translate-1-2 method to set outer tag different from outer tag set on -| | ... | Dot1ad sub-interface of DUT2; on DUT2 configure L2 bridge domain with -| | ... | one interface to TG and one Dot1ad sub-interface towards DUT1 with -| | ... | VLAN tag rewrite pop-2 method. [Ver] Make TG send ICMPv4 Echo Req -| | ... | tagged with one Dot1q tag from one of its interfaces to another one -| | ... | via DUT1 and DUT2; verify that packet is not received. -| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv4-ICMPv4 on TG-DUT1 and \ +| | ... | on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. [Cfg] On DUT1 configure L2 +| | ... | bridge domain (L2BD) with one interface to DUT2 and one Dot1ad +| | ... | sub-interface towards TG with VLAN tag rewrite translate-2-2 method to +| | ... | set outer tag different from outer tag set on Dot1ad sub-interface of +| | ... | DUT2; on DUT2 configure L2 bridge domain (L2BD) with one interface to +| | ... | TG and one Dot1ad sub-interface towards DUT1 with VLAN tag rewrite +| | ... | pop-2 tagged with Dot1ad tags from one of its interfaces to another +| | ... | one method. [Ver] Make TG send ICMPv4 Echo Req via DUT1 and DUT2; +| | ... | verify that packet is not received. [Ref] IEEE 802.1ad | | [Tags] | SKIP_PATCH | | Given Path for 3-node testing is set | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} | | And Interfaces in 3-node path are up -| | ${vlan1_name} | ${vlan1_index}= | When Vlan Subinterface Created -| | ... | ${dut1_node} | ${dut1_to_tg} | ${outer_vlan_id1} +| | ${vlan1_name} | ${vlan1_index}= | When Tagged Subinterface Created +| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} +| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} +| | ... | type_subif=two_tags dot1ad | | ${vlan2_name} | ${vlan2_index}= | And Tagged Subinterface Created | | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} | | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2} | | ... | type_subif=two_tags dot1ad | | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node} -| | ... | ${vlan1_index} | translate-1-2 | push_dot1q=${False} +| | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False} | | ... | tag1_id=${outer_vlan_wrong} | tag2_id=${inner_vlan_id2} | | And L2 Tag Rewrite Method Is Set On Interface | ${dut2_node} | | ... | ${vlan2_index} | pop-2 @@ -251,33 +183,35 @@ | | ... | ${bd_id1} | | Then Run Keyword And Expect Error | ICMP echo Rx timeout | | ... | Send and receive ICMP Packet | ${tg_node} | ${tg_to_dut1} -| | ... | ${tg_to_dut2} | encaps=Dot1q | vlan1=${outer_vlan_id1} +| | ... | ${tg_to_dut2} | encaps=Dot1ad | vlan1=${outer_vlan_id1} +| | ... | vlan2=${inner_vlan_id1} -| TC06: DUT1 and DUT2 with L2BD and VLAN translate-1-2 with wrong outer and inner tag used (DUT1) switch ICMPv4 between two TG links +| TC04: DUT1 and DUT2 with L2BD and VLAN translate-2-2 with wrong outer and inner tags used (DUT1) switch ICMPv4 between two TG links | | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv4-ICMPv4 on TG-DUT1, \ -| | ... | Eth-dot1ad-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. -| | ... | [Cfg] On DUT1 configure L2 bridge domain (L2BD) with one interface to -| | ... | DUT2 and one VLAN sub-interface towards TG with VLAN tag rewrite -| | ... | translate-1-2 method to set outer and inner tags different from tags -| | ... | set on Dot1ad sub-interface of DUT2; on DUT2 configure L2 -| | ... | bridge domain with one interface to TG and one Dot1ad sub-interface -| | ... | towards DUT1 with VLAN tag rewrite pop-2 method. [Ver] Make TG send -| | ... | ICMPv4 Echo Req tagged with one Dot1q tag from one of its interfaces -| | ... | to another one via DUT1 and DUT2; verify that packet is not received. -| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv4-ICMPv4 on TG-DUT1 and \ +| | ... | on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. [Cfg] On DUT1 configure L2 +| | ... | bridge domain (L2BD) with one interface to DUT2 and one Dot1ad +| | ... | sub-interface towards TG with VLAN tag rewrite translate-2-2 method to +| | ... | set tags different from tags set on Dot1ad sub-interface of DUT2; +| | ... | on DUT2 configure L2 bridge domain (L2BD) with one interface to TG +| | ... | and one Dot1ad sub-interface towards DUT1 with VLAN tag rewrite pop-2 +| | ... | tagged with Dot1ad tags from one of its interfaces to another one +| | ... | method. [Ver] Make TG send ICMPv4 Echo Req via DUT1 and DUT2; verify +| | ... | that packet is not received. [Ref] IEEE 802.1ad | | [Tags] | SKIP_PATCH | | Given Path for 3-node testing is set | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} | | And Interfaces in 3-node path are up -| | ${vlan1_name} | ${vlan1_index}= | When Vlan Subinterface Created -| | ... | ${dut1_node} | ${dut1_to_tg} | ${outer_vlan_id1} +| | ${vlan1_name} | ${vlan1_index}= | When Tagged Subinterface Created +| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} +| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} +| | ... | type_subif=two_tags dot1ad | | ${vlan2_name} | ${vlan2_index}= | And Tagged Subinterface Created | | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} | | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2} | | ... | type_subif=two_tags dot1ad | | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node} -| | ... | ${vlan1_index} | translate-1-2 | push_dot1q=${False} +| | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False} | | ... | tag1_id=${outer_vlan_wrong} | tag2_id=${inner_vlan_wrong} | | And L2 Tag Rewrite Method Is Set On Interface | ${dut2_node} | | ... | ${vlan2_index} | pop-2 @@ -293,99 +227,19 @@ | | ... | ${bd_id1} | | Then Run Keyword And Expect Error | ICMP echo Rx timeout | | ... | Send and receive ICMP Packet | ${tg_node} | ${tg_to_dut1} -| | ... | ${tg_to_dut2} | encaps=Dot1q | vlan1=${outer_vlan_id1} - -| TC07: DUT1 and DUT2 with L2BD and VLAN translate-2-1 (DUT1) switch ICMPv4 between two TG links -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv4-ICMPv4 on TG-DUT1, \ -| | ... | Eth-dot1q-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. -| | ... | [Cfg] On DUT1 configure L2 bridge domain (L2BD) with one interface to -| | ... | DUT2 and one Dot1ad sub-interface towards TG with VLAN tag rewrite -| | ... | translate-2-1 method; on DUT2 configure L2 bridge domain (L2BD) with -| | ... | one interface to TG and one VLAN sub-interface towards DUT1 with -| | ... | VLAN tag rewrite pop-1 method. [Ver] Make TG send ICMPv4 Echo Req -| | ... | tagged with Dot1ad tags from one of its interfaces to another one -| | ... | via DUT1 and DUT2; verify that packet is received. -| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad -| | Given Path for 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in 3-node path are up -| | ${vlan1_name} | ${vlan1_index}= | When Tagged Subinterface Created -| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} -| | ... | type_subif=two_tags dot1ad -| | ${vlan2_name} | ${vlan2_index}= | And Vlan Subinterface Created -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${outer_vlan_id2} -| | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node} -| | ... | ${vlan1_index} | translate-2-1 | tag1_id=${outer_vlan_id2} -| | And L2 Tag Rewrite Method Is Set On Interface | ${dut2_node} -| | ... | ${vlan2_index} | pop-1 -| | And Bridge domain on DUT node is created | ${dut1_node} | ${bd_id1} -| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_dut2} -| | ... | ${bd_id1} -| | And Interface is added to bridge domain | ${dut1_node} | ${vlan1_index} -| | ... | ${bd_id1} -| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id1} -| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg} -| | ... | ${bd_id1} -| | And Interface is added to bridge domain | ${dut2_node} | ${vlan2_index} -| | ... | ${bd_id1} -| | Then Send and receive ICMP Packet -| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} | encaps=Dot1ad -| | ... | vlan1=${outer_vlan_id1} | vlan2=${inner_vlan_id1} - -| TC08: DUT1 and DUT2 with L2BD and VLAN translate-2-1 with wrong tag used (DUT1) switch ICMPv4 between two TG links -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv4-ICMPv4 on TG-DUT1, \ -| | ... | Eth-dot1q-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. -| | ... | [Cfg] On DUT1 configure L2 bridge domain (L2BD) with one interface to -| | ... | DUT2 and one Dot1ad sub-interface towards TG with VLAN tag rewrite -| | ... | translate-2-1 method to set tag different from tag set on VLAN -| | ... | sub-interface of DUT2; on DUT2 configure L2 bridge domain (L2BD) with -| | ... | one interface to TG and one VLAN sub-interface towards DUT1 with -| | ... | VLAN tag rewrite pop-1 method. [Ver] Make TG send ICMPv4 Echo Req -| | ... | tagged with Dot1ad tags from one of its interfaces to another one -| | ... | via DUT1 and DUT2; verify that packet is not received. -| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad -| | [Tags] | SKIP_PATCH -| | Given Path for 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in 3-node path are up -| | ${vlan1_name} | ${vlan1_index}= | When Tagged Subinterface Created -| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} -| | ... | type_subif=two_tags dot1ad -| | ${vlan2_name} | ${vlan2_index}= | And Vlan Subinterface Created -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${outer_vlan_id2} -| | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node} -| | ... | ${vlan1_index} | translate-2-1 | tag1_id=${outer_vlan_wrong} -| | And L2 Tag Rewrite Method Is Set On Interface | ${dut2_node} -| | ... | ${vlan2_index} | pop-1 -| | And Bridge domain on DUT node is created | ${dut1_node} | ${bd_id1} -| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_dut2} -| | ... | ${bd_id1} -| | And Interface is added to bridge domain | ${dut1_node} | ${vlan1_index} -| | ... | ${bd_id1} -| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id1} -| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg} -| | ... | ${bd_id1} -| | And Interface is added to bridge domain | ${dut2_node} | ${vlan2_index} -| | ... | ${bd_id1} -| | Then Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Send and receive ICMP Packet | ${tg_node} | ${tg_to_dut1} | | ... | ${tg_to_dut2} | encaps=Dot1ad | vlan1=${outer_vlan_id1} | | ... | vlan2=${inner_vlan_id1} -| TC09: DUT1 and DUT2 with L2BD and VLAN translate-2-2 switch ICMPv4 between two TG links +| TC05: DUT1 and DUT2 with L2BD and VLAN translate-2-2 switch ICMPv6 between two TG links | | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv4-ICMPv4 on TG-DUT1 and \ -| | ... | on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. [Cfg] On DUT1 configure L2 +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1 and \ +| | ... | on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. [Cfg] On DUT1 configure L2 | | ... | bridge domain (L2BD) with one interface to DUT2 and one Dot1ad | | ... | sub-interface towards TG with VLAN tag rewrite translate-2-2 method; | | ... | on DUT2 configure L2 bridge domain (L2BD) with one interface to TG and | | ... | one Dot1ad sub-interface towards DUT1 with VLAN tag rewrite pop-1 | | ... | tagged with Dot1ad tags from one of its interfaces to another one -| | ... | method. [Ver] Make TG send ICMPv4 Echo Req via DUT1 and DUT2; verify +| | ... | method. [Ver] Make TG send ICMPv6 Echo Req via DUT1 and DUT2; verify | | ... | that packet is received. [Ref] IEEE 802.1ad | | Given Path for 3-node testing is set | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} @@ -414,20 +268,21 @@ | | And Interface is added to bridge domain | ${dut2_node} | ${vlan2_index} | | ... | ${bd_id1} | | Then Send and receive ICMP Packet -| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} | encaps=Dot1ad -| | ... | vlan1=${outer_vlan_id1} | vlan2=${inner_vlan_id1} +| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} | src_ip=${src_ip6} +| | ... | dst_ip=${dst_ip6} | encaps=Dot1ad | vlan1=${outer_vlan_id1} +| | ... | vlan2=${inner_vlan_id1} -| TC10: DUT1 and DUT2 with L2BD and VLAN translate-2-2 with wrong inner tag used (DUT1) switch ICMPv4 between two TG links +| TC06: DUT1 and DUT2 with L2BD and VLAN translate-2-2 with wrong inner tag used (DUT1) switch ICMPv6 between two TG links | | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv4-ICMPv4 on TG-DUT1 and \ -| | ... | on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. [Cfg] On DUT1 configure L2 +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1 and \ +| | ... | on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. [Cfg] On DUT1 configure L2 | | ... | bridge domain (L2BD) with one interface to DUT2 and one Dot1ad | | ... | sub-interface towards TG with VLAN tag rewrite translate-2-2 method to | | ... | set inner tag different from inner tag set on Dot1ad sub-interface of | | ... | DUT2; on DUT2 configure L2 bridge domain (L2BD) with one interface to | | ... | TG and one Dot1ad sub-interface towards DUT1 with VLAN tag rewrite | | ... | pop-1 tagged with Dot1ad tags from one of its interfaces to another -| | ... | one method. [Ver] Make TG send ICMPv4 Echo Req via DUT1 and DUT2; +| | ... | one method. [Ver] Make TG send ICMPv6 Echo Req via DUT1 and DUT2; | | ... | verify that packet is not received. [Ref] IEEE 802.1ad | | [Tags] | SKIP_PATCH | | Given Path for 3-node testing is set @@ -458,20 +313,20 @@ | | ... | ${bd_id1} | | Then Run Keyword And Expect Error | ICMP echo Rx timeout | | ... | Send and receive ICMP Packet | ${tg_node} | ${tg_to_dut1} -| | ... | ${tg_to_dut2} | encaps=Dot1ad | vlan1=${outer_vlan_id1} -| | ... | vlan2=${inner_vlan_id1} +| | ... | ${tg_to_dut2} | src_ip=${src_ip6} | dst_ip=${dst_ip6} | encaps=Dot1ad +| | ... | vlan1=${outer_vlan_id1} | vlan2=${inner_vlan_id1} -| TC11: DUT1 and DUT2 with L2BD and VLAN translate-2-2 with wrong outer tag used (DUT1) switch ICMPv4 between two TG links +| TC07: DUT1 and DUT2 with L2BD and VLAN translate-2-2 with wrong outer tag used (DUT1) switch ICMPv6 between two TG links | | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv4-ICMPv4 on TG-DUT1 and \ -| | ... | on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. [Cfg] On DUT1 configure L2 +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1 and \ +| | ... | on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. [Cfg] On DUT1 configure L2 | | ... | bridge domain (L2BD) with one interface to DUT2 and one Dot1ad | | ... | sub-interface towards TG with VLAN tag rewrite translate-2-2 method to | | ... | set outer tag different from outer tag set on Dot1ad sub-interface of | | ... | DUT2; on DUT2 configure L2 bridge domain (L2BD) with one interface to | | ... | TG and one Dot1ad sub-interface towards DUT1 with VLAN tag rewrite | | ... | pop-1 tagged with Dot1ad tags from one of its interfaces to another -| | ... | one method. [Ver] Make TG send ICMPv4 Echo Req via DUT1 and DUT2; +| | ... | one method. [Ver] Make TG send ICMPv6 Echo Req via DUT1 and DUT2; | | ... | verify that packet is not received. [Ref] IEEE 802.1ad | | [Tags] | SKIP_PATCH | | Given Path for 3-node testing is set @@ -502,20 +357,20 @@ | | ... | ${bd_id1} | | Then Run Keyword And Expect Error | ICMP echo Rx timeout | | ... | Send and receive ICMP Packet | ${tg_node} | ${tg_to_dut1} -| | ... | ${tg_to_dut2} | encaps=Dot1ad | vlan1=${outer_vlan_id1} -| | ... | vlan2=${inner_vlan_id1} +| | ... | ${tg_to_dut2} | src_ip=${src_ip6} | dst_ip=${dst_ip6} | encaps=Dot1ad +| | ... | vlan1=${outer_vlan_id1} | vlan2=${inner_vlan_id1} -| TC12: DUT1 and DUT2 with L2BD and VLAN translate-2-2 with wrong outer and inner tags used (DUT1) switch ICMPv4 between two TG links +| TC08: DUT1 and DUT2 with L2BD and VLAN translate-2-2 with wrong outer and inner tags used (DUT1) switch ICMPv6 between two TG links | | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv4-ICMPv4 on TG-DUT1 and \ -| | ... | on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. [Cfg] On DUT1 configure L2 +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1 and \ +| | ... | on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. [Cfg] On DUT1 configure L2 | | ... | bridge domain (L2BD) with one interface to DUT2 and one Dot1ad | | ... | sub-interface towards TG with VLAN tag rewrite translate-2-2 method to | | ... | set tags different from tags set on Dot1ad sub-interface of DUT2; | | ... | on DUT2 configure L2 bridge domain (L2BD) with one interface to TG | | ... | and one Dot1ad sub-interface towards DUT1 with VLAN tag rewrite pop-1 | | ... | tagged with Dot1ad tags from one of its interfaces to another one -| | ... | method. [Ver] Make TG send ICMPv4 Echo Req via DUT1 and DUT2; verify +| | ... | method. [Ver] Make TG send ICMPv6 Echo Req via DUT1 and DUT2; verify | | ... | that packet is not received. [Ref] IEEE 802.1ad | | [Tags] | SKIP_PATCH | | Given Path for 3-node testing is set @@ -546,5 +401,5 @@ | | ... | ${bd_id1} | | Then Run Keyword And Expect Error | ICMP echo Rx timeout | | ... | Send and receive ICMP Packet | ${tg_node} | ${tg_to_dut1} -| | ... | ${tg_to_dut2} | encaps=Dot1ad | vlan1=${outer_vlan_id1} -| | ... | vlan2=${inner_vlan_id1} +| | ... | ${tg_to_dut2} | src_ip=${src_ip6} | dst_ip=${dst_ip6} | encaps=Dot1ad +| | ... | vlan1=${outer_vlan_id1} | vlan2=${inner_vlan_id1} diff --git a/tests/func/vlan/qinq_l2_xconnect.robot b/tests/func/vlan/eth2p-dot1ad-l2xcbase-func.robot index 617447666a..617447666a 100644 --- a/tests/func/vlan/qinq_l2_xconnect.robot +++ b/tests/func/vlan/eth2p-dot1ad-l2xcbase-func.robot diff --git a/tests/func/vlan/vlan_tag_translate_l2_xconnect_ipv6.robot b/tests/func/vlan/eth2p-dot1ad-l2xcbase-vlantrans22-func.robot index 7f61443349..49368ea003 100644 --- a/tests/func/vlan/vlan_tag_translate_l2_xconnect_ipv6.robot +++ b/tests/func/vlan/eth2p-dot1ad-l2xcbase-vlantrans22-func.robot @@ -20,22 +20,22 @@ | Force Tags | 3_NODE_SINGLE_LINK_TOPO | HW_ENV | VM_ENV | Test Setup | Func Test Setup | Test Teardown | Func Test Teardown -| Documentation | *L2 cross-connect with VLAN tag rewrite test cases - IPv6* +| Documentation | *L2XC with VLAN tag rewrite test cases - translate-2-2* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology | ... | with single links between nodes. -| ... | *[Enc] Packet encapsulations:* Eth-dot1q-IPv6-ICMPv6 or -| ... | Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1 and DUT1-DUT2, Eth-IPv6-ICMPv6 -| ... | on TG-DUT2 for L2 switching of IPv6. +| ... | *[Enc] Packet encapsulations:* Eth-dot1ad-IPv4-ICMPv4 or +| ... | Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1 and DUT1-DUT2, Eth-IPv4-ICMPv4 or +| ... | Eth-IPv6-ICMPv6 on TG-DUT2 for L2 switching of IPv4/IPv6. | ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 cross-connect | ... | (L2XC) switching between VLAN sub-interface with VLAN tag rewrite -| ... | translate-1-1 method of interface towards TG and interface towards DUT2. +| ... | translate-2-2 method of interface towards TG and interface towards DUT2. | ... | DUT2 is configured configured with L2 cross-connect (L2XC) switching -| ... | between VLAN sub-interface with VLAN tag rewrite pop-1 method +| ... | between VLAN sub-interface with VLAN tag rewrite pop-2 method | ... | of interface towards DUT1 and interface towards TG. -| ... | *[Ver] TG verification:* Test ICMPv6 Echo Request packets are +| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are | ... | sent from TG on link to DUT1 and received in TG on link form DUT2; -| ... | on receive TG verifies packets for correctness and their IPv6 src-addr, +| ... | on receive TG verifies packets for correctness and their IPv4 src-addr, | ... | dst-addr and MAC addresses. | ... | *[Ref] Applicable standard specifications:* IEEE 802.1q, IEEE 802.1ad. @@ -54,90 +54,30 @@ | ${dst_ip}= | 3ffe:63::2 *** Test Cases *** -| TC01: DUT1 and DUT2 with L2XC and VLAN translate-1-1 (DUT1) switch ICMPv6 between two TG links +| TC01: DUT1 and DUT2 with L2XC and VLAN translate-2-2 switch ICMPv4 between two TG links | | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv6-ICMPv6 on TG-DUT1 and \ -| | ... | DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. [Cfg] On DUT1 configure L2 -| | ... | cross-connect (L2XC) with one interface to DUT2 and one VLAN -| | ... | sub-interface towards TG with VLAN tag rewrite translate-1-1 method; -| | ... | on DUT2 configure L2 cross-connect (L2XC) with one interface to TG -| | ... | and one VLAN sub-interface towards DUT1 with VLAN tag rewrite pop-1 -| | ... | method. [Ver] Make TG send ICMPv6 Echo Req tagegd with one Dot1q tag -| | ... | from one of its interfaces to another one via DUT1 and DUT2; verify -| | ... | that packet is received. [Ref] IEEE 802.1q -| | Given Path for 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in 3-node path are up -| | ${vlan1_name} | ${vlan1_index}= | When Vlan Subinterface Created -| | ... | ${dut1_node} | ${dut1_to_tg} | ${outer_vlan_id1} -| | ${vlan2_name} | ${vlan2_index}= | And Vlan Subinterface Created -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${outer_vlan_id2} -| | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node} -| | ... | ${vlan1_index} | translate-1-1 | tag1_id=${outer_vlan_id2} -| | And L2 Tag Rewrite Method Is Set On Interface | ${dut2_node} -| | ... | ${vlan2_index} | pop-1 -| | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index} -| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index} -| | Then Send and receive ICMP Packet -| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} | src_ip=${src_ip} -| | ... | dst_ip=${dst_ip} | encaps=Dot1q | vlan1=${outer_vlan_id1} - -| TC02: DUT1 and DUT2 with L2XC and VLAN translate-1-1 with wrong tag used (DUT1) switch ICMPv6 between two TG links -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv6-ICMPv6 on TG-DUT1 and \ -| | ... | DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. [Cfg] On DUT1 configure L2 -| | ... | cross-connect (L2XC) with one interface to DUT2 and one VLAN -| | ... | sub-interface towards TG with VLAN tag rewrite translate-1-1 method -| | ... | to set tag different from tag set on VLAN sub-interface of DUT2; -| | ... | on DUT2 configure L2 cross-connect (L2XC) with one interface to TG -| | ... | and one VLAN sub-interface towards DUT1 with VLAN tag rewrite pop-1 -| | ... | method. [Ver] Make TG send ICMPv6 Echo Req tagegd with one Dot1q tag -| | ... | from one of its interfaces to another one via DUT1 and DUT2; verify -| | ... | that packet is not received. [Ref] IEEE 802.1q -| | [Tags] | SKIP_PATCH -| | Given Path for 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in 3-node path are up -| | ${vlan1_name} | ${vlan1_index}= | When Vlan Subinterface Created -| | ... | ${dut1_node} | ${dut1_to_tg} | ${outer_vlan_id1} -| | ${vlan2_name} | ${vlan2_index}= | And Vlan Subinterface Created -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${outer_vlan_id2} -| | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node} -| | ... | ${vlan1_index} | translate-1-1 | tag1_id=${outer_vlan_wrong} -| | And L2 Tag Rewrite Method Is Set On Interface | ${dut2_node} -| | ... | ${vlan2_index} | pop-1 -| | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index} -| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index} -| | Then Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Send and receive ICMP Packet | ${tg_node} | ${tg_to_dut1} -| | ... | ${tg_to_dut2} | src_ip=${src_ip} | dst_ip=${dst_ip} | encaps=Dot1q -| | ... | vlan1=${outer_vlan_id1} - -| TC03: DUT1 and DUT2 with L2XC and VLAN translate-1-2 (DUT1) switch ICMPv6 between two TG links -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv6-ICMPv6 on TG-DUT1, \ -| | ... | Eth-dot1ad-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. -| | ... | [Cfg] On DUT1 configure L2 cross-connect (L2XC) with one interface to -| | ... | DUT2 and one VLAN sub-interface towards TG with VLAN tag rewrite -| | ... | translate-1-2 method; on DUT2 configure L2 cross-connect (L2XC) with -| | ... | one interface to TG and one Dot1ad sub-interface towards DUT1 with -| | ... | VLAN tag rewrite pop-2 method. [Ver] Make TG send ICMPv6 Echo Req -| | ... | tagegd with one Dot1q tag from one of its interfaces to another one -| | ... | via DUT1 and DUT2; verify that packet is received. -| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv4-ICMPv4 on TG-DUT1 and \ +| | ... | on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. [Cfg] On DUT1 configure L2 +| | ... | cross-connect (L2XC) with one interface to DUT2 and one Dot1ad +| | ... | sub-interface towards TG with VLAN tag rewrite translate-2-2 method; +| | ... | on DUT2 configure L2 cross-connect (L2XC) with one interface to TG and +| | ... | one Dot1ad sub-interface towards DUT1 with VLAN tag rewrite pop-1 +| | ... | tagged with Dot1ad tags from one of its interfaces to another one +| | ... | method. [Ver] Make TG send ICMPv4 Echo Req via DUT1 and DUT2; verify +| | ... | that packet is received. [Ref] IEEE 802.1ad | | Given Path for 3-node testing is set | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} | | And Interfaces in 3-node path are up -| | ${vlan1_name} | ${vlan1_index}= | When Vlan Subinterface Created -| | ... | ${dut1_node} | ${dut1_to_tg} | ${outer_vlan_id1} +| | ${vlan1_name} | ${vlan1_index}= | When Tagged Subinterface Created +| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} +| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} +| | ... | type_subif=two_tags dot1ad | | ${vlan2_name} | ${vlan2_index}= | And Tagged Subinterface Created | | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} | | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2} | | ... | type_subif=two_tags dot1ad | | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node} -| | ... | ${vlan1_index} | translate-1-2 | push_dot1q=${False} +| | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False} | | ... | tag1_id=${outer_vlan_id2} | tag2_id=${inner_vlan_id2} | | And L2 Tag Rewrite Method Is Set On Interface | ${dut2_node} | | ... | ${vlan2_index} | pop-2 @@ -145,34 +85,35 @@ | | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index} | | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index} | | Then Send and receive ICMP Packet -| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} | src_ip=${src_ip} -| | ... | dst_ip=${dst_ip} | encaps=Dot1q | vlan1=${outer_vlan_id1} +| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} | encaps=Dot1ad +| | ... | vlan1=${outer_vlan_id1} | vlan2=${inner_vlan_id1} -| TC04: DUT1 and DUT2 with L2XC and VLAN translate-1-2 with wrong inner tag used (DUT1) switch ICMPv6 between two TG links +| TC02: DUT1 and DUT2 with L2XC and VLAN translate-2-2 with wrong inner tag used (DUT1) switch ICMPv4 between two TG links | | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv6-ICMPv6 on TG-DUT1, \ -| | ... | Eth-dot1ad-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. -| | ... | [Cfg] On DUT1 configure L2 cross-connect (L2XC) with one interface to -| | ... | DUT2 and one VLAN sub-interface towards TG with VLAN tag rewrite -| | ... | translate-1-2 method to set inner tag different from inner tag set on -| | ... | Dot1ad sub-interface of DUT2; on DUT2 configure L2 cross-connect with -| | ... | one interface to TG and one Dot1ad sub-interface towards DUT1 with -| | ... | VLAN tag rewrite pop-2 method. [Ver] Make TG send ICMPv6 Echo Req -| | ... | tagegd with one Dot1q tag from one of its interfaces to another one -| | ... | via DUT1 and DUT2; verify that packet is not received. -| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv4-ICMPv4 on TG-DUT1 and \ +| | ... | on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. [Cfg] On DUT1 configure L2 +| | ... | cross-connect (L2XC) with one interface to DUT2 and one Dot1ad +| | ... | sub-interface towards TG with VLAN tag rewrite translate-2-2 method to +| | ... | set inner tag different from inner tag set on Dot1ad sub-interface of +| | ... | DUT2; on DUT2 configure L2 cross-connect (L2XC) with one interface to +| | ... | TG and one Dot1ad sub-interface towards DUT1 with VLAN tag rewrite +| | ... | pop-1 tagged with Dot1ad tags from one of its interfaces to another one +| | ... | method. [Ver] Make TG send ICMPv4 Echo Req via DUT1 and DUT2; verify +| | ... | that packet is not received. [Ref] IEEE 802.1ad | | [Tags] | SKIP_PATCH | | Given Path for 3-node testing is set | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} | | And Interfaces in 3-node path are up -| | ${vlan1_name} | ${vlan1_index}= | When Vlan Subinterface Created -| | ... | ${dut1_node} | ${dut1_to_tg} | ${outer_vlan_id1} +| | ${vlan1_name} | ${vlan1_index}= | When Tagged Subinterface Created +| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} +| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} +| | ... | type_subif=two_tags dot1ad | | ${vlan2_name} | ${vlan2_index}= | And Tagged Subinterface Created | | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} | | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2} | | ... | type_subif=two_tags dot1ad | | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node} -| | ... | ${vlan1_index} | translate-1-2 | push_dot1q=${False} +| | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False} | | ... | tag1_id=${outer_vlan_id2} | tag2_id=${inner_vlan_wrong} | | And L2 Tag Rewrite Method Is Set On Interface | ${dut2_node} | | ... | ${vlan2_index} | pop-2 @@ -181,34 +122,35 @@ | | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index} | | Then Run Keyword And Expect Error | ICMP echo Rx timeout | | ... | Send and receive ICMP Packet | ${tg_node} | ${tg_to_dut1} -| | ... | ${tg_to_dut2} | src_ip=${src_ip} | dst_ip=${dst_ip} | encaps=Dot1q -| | ... | vlan1=${outer_vlan_id1} +| | ... | ${tg_to_dut2} | encaps=Dot1ad | vlan1=${outer_vlan_id1} +| | ... | vlan2=${inner_vlan_id1} -| TC05: DUT1 and DUT2 with L2XC and VLAN translate-1-2 with wrong outer tag used (DUT1) switch ICMPv6 between two TG links +| TC03: DUT1 and DUT2 with L2XC and VLAN translate-2-2 with wrong outer tag used (DUT1) switch ICMPv4 between two TG links | | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv6-ICMPv6 on TG-DUT1, \ -| | ... | Eth-dot1ad-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. -| | ... | [Cfg] On DUT1 configure L2 cross-connect (L2XC) with one interface to -| | ... | DUT2 and one VLAN sub-interface towards TG with VLAN tag rewrite -| | ... | translate-1-2 method to set outer tag different from outer tag set on -| | ... | Dot1ad sub-interface of DUT2; on DUT2 configure L2 cross-connect with -| | ... | one interface to TG and one Dot1ad sub-interface towards DUT1 with -| | ... | VLAN tag rewrite pop-2 method. [Ver] Make TG send ICMPv6 Echo Req -| | ... | tagegd with one Dot1q tag from one of its interfaces to another one -| | ... | via DUT1 and DUT2; verify that packet is not received. -| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv4-ICMPv4 on TG-DUT1 and \ +| | ... | on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. [Cfg] On DUT1 configure L2 +| | ... | cross-connect (L2XC) with one interface to DUT2 and one Dot1ad +| | ... | sub-interface towards TG with VLAN tag rewrite translate-2-2 method to +| | ... | set outer tag different from outer tag set on Dot1ad sub-interface of +| | ... | DUT2; on DUT2 configure L2 cross-connect (L2XC) with one interface to +| | ... | TG and one Dot1ad sub-interface towards DUT1 with VLAN tag rewrite +| | ... | pop-1 tagged with Dot1ad tags from one of its interfaces to another +| | ... | one method. [Ver] Make TG send ICMPv4 Echo Req via DUT1 and DUT2; +| | ... | verify that packet is not received. [Ref] IEEE 802.1ad | | [Tags] | SKIP_PATCH | | Given Path for 3-node testing is set | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} | | And Interfaces in 3-node path are up -| | ${vlan1_name} | ${vlan1_index}= | When Vlan Subinterface Created -| | ... | ${dut1_node} | ${dut1_to_tg} | ${outer_vlan_id1} +| | ${vlan1_name} | ${vlan1_index}= | When Tagged Subinterface Created +| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} +| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} +| | ... | type_subif=two_tags dot1ad | | ${vlan2_name} | ${vlan2_index}= | And Tagged Subinterface Created | | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} | | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2} | | ... | type_subif=two_tags dot1ad | | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node} -| | ... | ${vlan1_index} | translate-1-2 | push_dot1q=${False} +| | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False} | | ... | tag1_id=${outer_vlan_wrong} | tag2_id=${inner_vlan_id2} | | And L2 Tag Rewrite Method Is Set On Interface | ${dut2_node} | | ... | ${vlan2_index} | pop-2 @@ -217,34 +159,35 @@ | | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index} | | Then Run Keyword And Expect Error | ICMP echo Rx timeout | | ... | Send and receive ICMP Packet | ${tg_node} | ${tg_to_dut1} -| | ... | ${tg_to_dut2} | src_ip=${src_ip} | dst_ip=${dst_ip} | encaps=Dot1q -| | ... | vlan1=${outer_vlan_id1} +| | ... | ${tg_to_dut2} | encaps=Dot1ad | vlan1=${outer_vlan_id1} +| | ... | vlan2=${inner_vlan_id1} -| TC06: DUT1 and DUT2 with L2XC and VLAN translate-1-2 with wrong outer and inner tag used (DUT1) switch ICMPv6 between two TG links +| TC04: DUT1 and DUT2 with L2XC and VLAN translate-2-2 with wrong outer and inner tags used (DUT1) switch ICMPv4 between two TG links | | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv6-ICMPv6 on TG-DUT1, \ -| | ... | Eth-dot1ad-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. -| | ... | [Cfg] On DUT1 configure L2 cross-connect (L2XC) with one interface to -| | ... | DUT2 and one VLAN sub-interface towards TG with VLAN tag rewrite -| | ... | translate-1-2 method to set outer and inner tags different from tags -| | ... | set on Dot1ad sub-interface of DUT2; on DUT2 configure L2 -| | ... | cross-connect with one interface to TG and one Dot1ad sub-interface -| | ... | towards DUT1 with VLAN tag rewrite pop-2 method. [Ver] Make TG send -| | ... | ICMPv6 Echo Req tagegd with one Dot1q tag from one of its interfaces -| | ... | to another one via DUT1 and DUT2; verify that packet is not received. -| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv4-ICMPv4 on TG-DUT1 and \ +| | ... | on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. [Cfg] On DUT1 configure L2 +| | ... | cross-connect (L2XC) with one interface to DUT2 and one Dot1ad +| | ... | sub-interface towards TG with VLAN tag rewrite translate-2-2 method to +| | ... | set tags different from tags set on Dot1ad sub-interface of DUT2; +| | ... | on DUT2 configure L2 cross-connect (L2XC) with one interface to TG +| | ... | and one Dot1ad sub-interface towards DUT1 with VLAN tag rewrite pop-1 +| | ... | tagged with Dot1ad tags from one of its interfaces to another one +| | ... | method. [Ver] Make TG send ICMPv4 Echo Req via DUT1 and DUT2; verify +| | ... | that packet is not received. [Ref] IEEE 802.1ad | | [Tags] | SKIP_PATCH | | Given Path for 3-node testing is set | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} | | And Interfaces in 3-node path are up -| | ${vlan1_name} | ${vlan1_index}= | When Vlan Subinterface Created -| | ... | ${dut1_node} | ${dut1_to_tg} | ${outer_vlan_id1} +| | ${vlan1_name} | ${vlan1_index}= | When Tagged Subinterface Created +| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} +| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} +| | ... | type_subif=two_tags dot1ad | | ${vlan2_name} | ${vlan2_index}= | And Tagged Subinterface Created | | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} | | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2} | | ... | type_subif=two_tags dot1ad | | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node} -| | ... | ${vlan1_index} | translate-1-2 | push_dot1q=${False} +| | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False} | | ... | tag1_id=${outer_vlan_wrong} | tag2_id=${inner_vlan_wrong} | | And L2 Tag Rewrite Method Is Set On Interface | ${dut2_node} | | ... | ${vlan2_index} | pop-2 @@ -253,78 +196,10 @@ | | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index} | | Then Run Keyword And Expect Error | ICMP echo Rx timeout | | ... | Send and receive ICMP Packet | ${tg_node} | ${tg_to_dut1} -| | ... | ${tg_to_dut2} | src_ip=${src_ip} | dst_ip=${dst_ip} | encaps=Dot1q -| | ... | vlan1=${outer_vlan_id1} - -| TC07: DUT1 and DUT2 with L2XC and VLAN translate-2-1 (DUT1) switch ICMPv6 between two TG links -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1, \ -| | ... | Eth-dot1q-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. -| | ... | [Cfg] On DUT1 configure L2 cross-connect (L2XC) with one interface to -| | ... | DUT2 and one Dot1ad sub-interface towards TG with VLAN tag rewrite -| | ... | translate-2-1 method; on DUT2 configure L2 cross-connect (L2XC) with -| | ... | one interface to TG and one VLAN sub-interface towards DUT1 with -| | ... | VLAN tag rewrite pop-1 method. [Ver] Make TG send ICMPv6 Echo Req -| | ... | tagegd with Dot1ad tags from one of its interfaces to another one -| | ... | via DUT1 and DUT2; verify that packet is received. -| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad -| | Given Path for 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in 3-node path are up -| | ${vlan1_name} | ${vlan1_index}= | When Tagged Subinterface Created -| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} -| | ... | type_subif=two_tags dot1ad -| | ${vlan2_name} | ${vlan2_index}= | And Vlan Subinterface Created -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${outer_vlan_id2} -| | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node} -| | ... | ${vlan1_index} | translate-2-1 | tag1_id=${outer_vlan_id2} -| | And L2 Tag Rewrite Method Is Set On Interface | ${dut2_node} -| | ... | ${vlan2_index} | pop-1 -| | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index} -| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index} -| | Then Send and receive ICMP Packet -| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} | src_ip=${src_ip} -| | ... | dst_ip=${dst_ip} | encaps=Dot1ad | vlan1=${outer_vlan_id1} +| | ... | ${tg_to_dut2} | encaps=Dot1ad | vlan1=${outer_vlan_id1} | | ... | vlan2=${inner_vlan_id1} -| TC08: DUT1 and DUT2 with L2XC and VLAN translate-2-1 with wrong tag used (DUT1) switch ICMPv6 between two TG links -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1, \ -| | ... | Eth-dot1q-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. -| | ... | [Cfg] On DUT1 configure L2 cross-connect (L2XC) with one interface to -| | ... | DUT2 and one Dot1ad sub-interface towards TG with VLAN tag rewrite -| | ... | translate-2-1 method to set tag different from tag set on VLAN -| | ... | sub-interface of DUT2; on DUT2 configure L2 cross-connect (L2XC) with -| | ... | one interface to TG and one VLAN sub-interface towards DUT1 with -| | ... | VLAN tag rewrite pop-1 method. [Ver] Make TG send ICMPv6 Echo Req -| | ... | tagegd with Dot1ad tags from one of its interfaces to another one -| | ... | via DUT1 and DUT2; verify that packet is not received. -| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad -| | [Tags] | SKIP_PATCH -| | Given Path for 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in 3-node path are up -| | ${vlan1_name} | ${vlan1_index}= | When Tagged Subinterface Created -| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} -| | ... | type_subif=two_tags dot1ad -| | ${vlan2_name} | ${vlan2_index}= | And Vlan Subinterface Created -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${outer_vlan_id2} -| | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node} -| | ... | ${vlan1_index} | translate-2-1 | tag1_id=${outer_vlan_wrong} -| | And L2 Tag Rewrite Method Is Set On Interface | ${dut2_node} -| | ... | ${vlan2_index} | pop-1 -| | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index} -| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index} -| | Then Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Send and receive ICMP Packet | ${tg_node} | ${tg_to_dut1} -| | ... | ${tg_to_dut2} | src_ip=${src_ip} | dst_ip=${dst_ip} | encaps=Dot1ad -| | ... | vlan1=${outer_vlan_id1} | vlan2=${inner_vlan_id1} - -| TC09: DUT1 and DUT2 with L2XC and VLAN translate-2-2 switch ICMPv6 between two TG links +| TC05: DUT1 and DUT2 with L2XC and VLAN translate-2-2 switch ICMPv6 between two TG links | | [Documentation] | | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1 and \ | | ... | on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. [Cfg] On DUT1 configure L2 @@ -359,7 +234,7 @@ | | ... | dst_ip=${dst_ip} | encaps=Dot1ad | vlan1=${outer_vlan_id1} | | ... | vlan2=${inner_vlan_id1} -| TC10: DUT1 and DUT2 with L2XC and VLAN translate-2-2 with wrong inner tag used (DUT1) switch ICMPv6 between two TG links +| TC06: DUT1 and DUT2 with L2XC and VLAN translate-2-2 with wrong inner tag used (DUT1) switch ICMPv6 between two TG links | | [Documentation] | | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1 and \ | | ... | on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. [Cfg] On DUT1 configure L2 @@ -396,7 +271,7 @@ | | ... | ${tg_to_dut2} | src_ip=${src_ip} | dst_ip=${dst_ip} | encaps=Dot1ad | | ... | vlan1=${outer_vlan_id1} | vlan2=${inner_vlan_id1} -| TC11: DUT1 and DUT2 with L2XC and VLAN translate-2-2 with wrong outer tag used (DUT1) switch ICMPv6 between two TG links +| TC07: DUT1 and DUT2 with L2XC and VLAN translate-2-2 with wrong outer tag used (DUT1) switch ICMPv6 between two TG links | | [Documentation] | | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1 and \ | | ... | on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. [Cfg] On DUT1 configure L2 @@ -433,7 +308,7 @@ | | ... | ${tg_to_dut2} | src_ip=${src_ip} | dst_ip=${dst_ip} | encaps=Dot1ad | | ... | vlan1=${outer_vlan_id1} | vlan2=${inner_vlan_id1} -| TC12: DUT1 and DUT2 with L2XC and VLAN translate-2-2 with wrong outer and inner tags used (DUT1) switch ICMPv6 between two TG links +| TC08: DUT1 and DUT2 with L2XC and VLAN translate-2-2 with wrong outer and inner tags used (DUT1) switch ICMPv6 between two TG links | | [Documentation] | | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1 and \ | | ... | on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. [Cfg] On DUT1 configure L2 diff --git a/tests/func/vlan/vlan_tag_translate_l2_bridge_domain_ipv6.robot b/tests/func/vlan/eth2p-dot1q--dot1ad-l2bdbasemaclrn-vlantrans12-func.robot index 6e3c76c3b0..3867baa5b4 100644 --- a/tests/func/vlan/vlan_tag_translate_l2_bridge_domain_ipv6.robot +++ b/tests/func/vlan/eth2p-dot1q--dot1ad-l2bdbasemaclrn-vlantrans12-func.robot @@ -21,23 +21,23 @@ | Force Tags | 3_NODE_SINGLE_LINK_TOPO | HW_ENV | VM_ENV | Test Setup | Func Test Setup | Test Teardown | Func Test Teardown -| Documentation | *L2 bridge domain with VLAN tag rewrite test cases - IPv6* +| Documentation | *L2BD with VLAN tag rewrite test cases - translate-1-2* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology | ... | with single links between nodes. -| ... | *[Enc] Packet encapsulations:* Eth-dot1q-IPv6-ICMPv6 or -| ... | Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1 and DUT1-DUT2, Eth-IPv6-ICMPv6 -| ... | on TG-DUT2 for L2 switching of IPv6. +| ... | *[Enc] Packet encapsulations:* Eth-dot1q-IPv4-ICMPv4 or +| ... | Eth-dot1q-IPv6-ICMPv6 on TG-DUT1, Eth-dot1ad-IPv4-ICMPv4 or +| ... | Eth-dot1ad-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv4-ICMPv4 or Eth-IPv6-ICMPv6 +| ... | on TG-DUT2 for L2 switching of IPv4/IPv6. | ... | *[Cfg] DUT configuration:* DUT1 is configured with bridge domain (L2BD) | ... | switching combined with MAC learning enabled and added VLAN -| ... | sub-interface with VLAN tag rewrite translate-1-1 method -| ... | of interface towards TG and interface towards DUT2. DUT2 is configured -| ... | with L2 bridge domain (L2BD) switching between VLAN sub-interface -| ... | with VLAN tag rewrite pop-1 method of interface towards DUT1 and -| ... | interface towards TG. -| ... | *[Ver] TG verification:* Test ICMPv6 Echo Request packets are +| ... | sub-interface with VLAN tag rewrite translate-1-2 method of interface +| ... | towards TG and interface towards DUT2. DUT2 is configured with L2 +| ... | bridge domain (L2BD) switching between VLAN sub-interface with VLAN tag +| ... | rewrite pop-2 method of interface towards DUT1 and interface towards TG. +| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are | ... | sent from TG on link to DUT1 and received in TG on link form DUT2; -| ... | on receive TG verifies packets for correctness and their IPv6 src-addr, +| ... | on receive TG verifies packets for correctness and their IPv4 src-addr, | ... | dst-addr and MAC addresses. | ... | *[Ref] Applicable standard specifications:* IEEE 802.1q, IEEE 802.1ad. @@ -54,94 +54,19 @@ | ${inner_vlan_id2}= | 220 | ${inner_vlan_wrong}= | 250 -| ${src_ip}= | 3ffe:63::1 -| ${dst_ip}= | 3ffe:63::2 +| ${src_ip6}= | 3ffe:63::1 +| ${dst_ip6}= | 3ffe:63::2 *** Test Cases *** -| TC01: DUT1 and DUT2 with L2BD and VLAN translate-1-1 (DUT1) switch ICMPv6 between two TG links +| TC01: DUT1 and DUT2 with L2BD and VLAN translate-1-2 (DUT1) switch ICMPv4 between two TG links | | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv6-ICMPv6 on TG-DUT1 and \ -| | ... | DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. [Cfg] On DUT1 configure L2 -| | ... | bridge domain (L2BD) with one interface to DUT2 and one VLAN -| | ... | sub-interface towards TG with VLAN tag rewrite translate-1-1 method; -| | ... | on DUT2 configure L2 bridge domain (L2BD) with one interface to TG -| | ... | and one VLAN sub-interface towards DUT1 with VLAN tag rewrite pop-1 -| | ... | method. [Ver] Make TG send ICMPv6 Echo Req tagged with one Dot1q tag -| | ... | from one of its interfaces to another one via DUT1 and DUT2; verify -| | ... | that packet is received. [Ref] IEEE 802.1q -| | Given Path for 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in 3-node path are up -| | ${vlan1_name} | ${vlan1_index}= | When Vlan Subinterface Created -| | ... | ${dut1_node} | ${dut1_to_tg} | ${outer_vlan_id1} -| | ${vlan2_name} | ${vlan2_index}= | And Vlan Subinterface Created -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${outer_vlan_id2} -| | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node} -| | ... | ${vlan1_index} | translate-1-1 | tag1_id=${outer_vlan_id2} -| | And L2 Tag Rewrite Method Is Set On Interface | ${dut2_node} -| | ... | ${vlan2_index} | pop-1 -| | And Bridge domain on DUT node is created | ${dut1_node} | ${bd_id1} -| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_dut2} -| | ... | ${bd_id1} -| | And Interface is added to bridge domain | ${dut1_node} | ${vlan1_index} -| | ... | ${bd_id1} -| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id1} -| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg} -| | ... | ${bd_id1} -| | And Interface is added to bridge domain | ${dut2_node} | ${vlan2_index} -| | ... | ${bd_id1} -| | Then Send and receive ICMP Packet -| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} | src_ip=${src_ip} -| | ... | dst_ip=${dst_ip} | encaps=Dot1q | vlan1=${outer_vlan_id1} - -| TC02: DUT1 and DUT2 with L2BD and VLAN translate-1-1 with wrong tag used (DUT1) switch ICMPv6 between two TG links -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv6-ICMPv6 on TG-DUT1 and \ -| | ... | DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. [Cfg] On DUT1 configure L2 -| | ... | bridge domain (L2BD) with one interface to DUT2 and one VLAN -| | ... | sub-interface towards TG with VLAN tag rewrite translate-1-1 method -| | ... | to set tag different from tag set on VLAN sub-interface of DUT2; -| | ... | on DUT2 configure L2 bridge domain (L2BD) with one interface to TG -| | ... | and one VLAN sub-interface towards DUT1 with VLAN tag rewrite pop-1 -| | ... | method. [Ver] Make TG send ICMPv6 Echo Req tagged with one Dot1q tag -| | ... | from one of its interfaces to another one via DUT1 and DUT2; verify -| | ... | that packet is not received. [Ref] IEEE 802.1q -| | [Tags] | SKIP_PATCH -| | Given Path for 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in 3-node path are up -| | ${vlan1_name} | ${vlan1_index}= | When Vlan Subinterface Created -| | ... | ${dut1_node} | ${dut1_to_tg} | ${outer_vlan_id1} -| | ${vlan2_name} | ${vlan2_index}= | And Vlan Subinterface Created -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${outer_vlan_id2} -| | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node} -| | ... | ${vlan1_index} | translate-1-1 | tag1_id=${outer_vlan_wrong} -| | And L2 Tag Rewrite Method Is Set On Interface | ${dut2_node} -| | ... | ${vlan2_index} | pop-1 -| | And Bridge domain on DUT node is created | ${dut1_node} | ${bd_id1} -| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_dut2} -| | ... | ${bd_id1} -| | And Interface is added to bridge domain | ${dut1_node} | ${vlan1_index} -| | ... | ${bd_id1} -| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id1} -| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg} -| | ... | ${bd_id1} -| | And Interface is added to bridge domain | ${dut2_node} | ${vlan2_index} -| | ... | ${bd_id1} -| | Then Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Send and receive ICMP Packet | ${tg_node} | ${tg_to_dut1} -| | ... | ${tg_to_dut2} | src_ip=${src_ip} | dst_ip=${dst_ip} | encaps=Dot1q -| | ... | vlan1=${outer_vlan_id1} - -| TC03: DUT1 and DUT2 with L2BD and VLAN translate-1-2 (DUT1) switch ICMPv6 between two TG links -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv6-ICMPv6 on TG-DUT1, \ -| | ... | Eth-dot1ad-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv4-ICMPv4 on TG-DUT1, \ +| | ... | Eth-dot1ad-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. | | ... | [Cfg] On DUT1 configure L2 bridge domain (L2BD) with one interface to | | ... | DUT2 and one VLAN sub-interface towards TG with VLAN tag rewrite | | ... | translate-1-2 method; on DUT2 configure L2 bridge domain (L2BD) with | | ... | one interface to TG and one Dot1ad sub-interface towards DUT1 with -| | ... | VLAN tag rewrite pop-2 method. [Ver] Make TG send ICMPv6 Echo Req +| | ... | VLAN tag rewrite pop-2 method. [Ver] Make TG send ICMPv4 Echo Req | | ... | tagged with one Dot1q tag from one of its interfaces to another one | | ... | via DUT1 and DUT2; verify that packet is received. | | ... | [Ref] IEEE 802.1q, IEEE 802.1ad @@ -152,11 +77,11 @@ | | ... | ${dut1_node} | ${dut1_to_tg} | ${outer_vlan_id1} | | ${vlan2_name} | ${vlan2_index}= | And Tagged Subinterface Created | | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2} +| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id1} | | ... | type_subif=two_tags dot1ad | | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node} | | ... | ${vlan1_index} | translate-1-2 | push_dot1q=${False} -| | ... | tag1_id=${outer_vlan_id2} | tag2_id=${inner_vlan_id2} +| | ... | tag1_id=${outer_vlan_id2} | tag2_id=${inner_vlan_id1} | | And L2 Tag Rewrite Method Is Set On Interface | ${dut2_node} | | ... | ${vlan2_index} | pop-2 | | And Bridge domain on DUT node is created | ${dut1_node} | ${bd_id1} @@ -170,19 +95,19 @@ | | And Interface is added to bridge domain | ${dut2_node} | ${vlan2_index} | | ... | ${bd_id1} | | Then Send and receive ICMP Packet -| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} | src_ip=${src_ip} -| | ... | dst_ip=${dst_ip} | encaps=Dot1q | vlan1=${outer_vlan_id1} +| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} | encaps=Dot1q +| | ... | vlan1=${outer_vlan_id1} -| TC04: DUT1 and DUT2 with L2BD and VLAN translate-1-2 with wrong inner tag used (DUT1) switch ICMPv6 between two TG links +| TC02: DUT1 and DUT2 with L2BD and VLAN translate-1-2 with wrong inner tag used (DUT1) switch ICMPv4 between two TG links | | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv6-ICMPv6 on TG-DUT1, \ -| | ... | Eth-dot1ad-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv4-ICMPv4 on TG-DUT1, \ +| | ... | Eth-dot1ad-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. | | ... | [Cfg] On DUT1 configure L2 bridge domain (L2BD) with one interface to | | ... | DUT2 and one VLAN sub-interface towards TG with VLAN tag rewrite | | ... | translate-1-2 method to set inner tag different from inner tag set on | | ... | Dot1ad sub-interface of DUT2; on DUT2 configure L2 bridge domain with | | ... | one interface to TG and one Dot1ad sub-interface towards DUT1 with -| | ... | VLAN tag rewrite pop-2 method. [Ver] Make TG send ICMPv6 Echo Req +| | ... | VLAN tag rewrite pop-2 method. [Ver] Make TG send ICMPv4 Echo Req | | ... | tagged with one Dot1q tag from one of its interfaces to another one | | ... | via DUT1 and DUT2; verify that packet is not received. | | ... | [Ref] IEEE 802.1q, IEEE 802.1ad @@ -194,7 +119,7 @@ | | ... | ${dut1_node} | ${dut1_to_tg} | ${outer_vlan_id1} | | ${vlan2_name} | ${vlan2_index}= | And Tagged Subinterface Created | | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2} +| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id1} | | ... | type_subif=two_tags dot1ad | | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node} | | ... | ${vlan1_index} | translate-1-2 | push_dot1q=${False} @@ -213,19 +138,18 @@ | | ... | ${bd_id1} | | Then Run Keyword And Expect Error | ICMP echo Rx timeout | | ... | Send and receive ICMP Packet | ${tg_node} | ${tg_to_dut1} -| | ... | ${tg_to_dut2} | src_ip=${src_ip} | dst_ip=${dst_ip} | encaps=Dot1q -| | ... | vlan1=${outer_vlan_id1} +| | ... | ${tg_to_dut2} | encaps=Dot1q | vlan1=${outer_vlan_id1} -| TC05: DUT1 and DUT2 with L2BD and VLAN translate-1-2 with wrong outer tag used (DUT1) switch ICMPv6 between two TG links +| TC03: DUT1 and DUT2 with L2BD and VLAN translate-1-2 with wrong outer tag used (DUT1) switch ICMPv4 between two TG links | | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv6-ICMPv6 on TG-DUT1, \ -| | ... | Eth-dot1ad-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv4-ICMPv4 on TG-DUT1, \ +| | ... | Eth-dot1ad-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. | | ... | [Cfg] On DUT1 configure L2 bridge domain (L2BD) with one interface to | | ... | DUT2 and one VLAN sub-interface towards TG with VLAN tag rewrite | | ... | translate-1-2 method to set outer tag different from outer tag set on | | ... | Dot1ad sub-interface of DUT2; on DUT2 configure L2 bridge domain with | | ... | one interface to TG and one Dot1ad sub-interface towards DUT1 with -| | ... | VLAN tag rewrite pop-2 method. [Ver] Make TG send ICMPv6 Echo Req +| | ... | VLAN tag rewrite pop-2 method. [Ver] Make TG send ICMPv4 Echo Req | | ... | tagged with one Dot1q tag from one of its interfaces to another one | | ... | via DUT1 and DUT2; verify that packet is not received. | | ... | [Ref] IEEE 802.1q, IEEE 802.1ad @@ -237,11 +161,11 @@ | | ... | ${dut1_node} | ${dut1_to_tg} | ${outer_vlan_id1} | | ${vlan2_name} | ${vlan2_index}= | And Tagged Subinterface Created | | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2} +| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id1} | | ... | type_subif=two_tags dot1ad | | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node} | | ... | ${vlan1_index} | translate-1-2 | push_dot1q=${False} -| | ... | tag1_id=${outer_vlan_wrong} | tag2_id=${inner_vlan_id2} +| | ... | tag1_id=${outer_vlan_wrong} | tag2_id=${inner_vlan_id1} | | And L2 Tag Rewrite Method Is Set On Interface | ${dut2_node} | | ... | ${vlan2_index} | pop-2 | | And Bridge domain on DUT node is created | ${dut1_node} | ${bd_id1} @@ -256,20 +180,19 @@ | | ... | ${bd_id1} | | Then Run Keyword And Expect Error | ICMP echo Rx timeout | | ... | Send and receive ICMP Packet | ${tg_node} | ${tg_to_dut1} -| | ... | ${tg_to_dut2} | src_ip=${src_ip} | dst_ip=${dst_ip} | encaps=Dot1q -| | ... | vlan1=${outer_vlan_id1} +| | ... | ${tg_to_dut2} | encaps=Dot1q | vlan1=${outer_vlan_id1} -| TC06: DUT1 and DUT2 with L2BD and VLAN translate-1-2 with wrong outer and inner tag used (DUT1) switch ICMPv6 between two TG links +| TC04: DUT1 and DUT2 with L2BD and VLAN translate-1-2 with wrong outer and inner tag used (DUT1) switch ICMPv4 between two TG links | | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv6-ICMPv6 on TG-DUT1, \ -| | ... | Eth-dot1ad-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv4-ICMPv4 on TG-DUT1, \ +| | ... | Eth-dot1ad-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. | | ... | [Cfg] On DUT1 configure L2 bridge domain (L2BD) with one interface to | | ... | DUT2 and one VLAN sub-interface towards TG with VLAN tag rewrite | | ... | translate-1-2 method to set outer and inner tags different from tags | | ... | set on Dot1ad sub-interface of DUT2; on DUT2 configure L2 | | ... | bridge domain with one interface to TG and one Dot1ad sub-interface | | ... | towards DUT1 with VLAN tag rewrite pop-2 method. [Ver] Make TG send -| | ... | ICMPv6 Echo Req tagged with one Dot1q tag from one of its interfaces +| | ... | ICMPv4 Echo Req tagged with one Dot1q tag from one of its interfaces | | ... | to another one via DUT1 and DUT2; verify that packet is not received. | | ... | [Ref] IEEE 802.1q, IEEE 802.1ad | | [Tags] | SKIP_PATCH @@ -280,7 +203,7 @@ | | ... | ${dut1_node} | ${dut1_to_tg} | ${outer_vlan_id1} | | ${vlan2_name} | ${vlan2_index}= | And Tagged Subinterface Created | | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2} +| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id1} | | ... | type_subif=two_tags dot1ad | | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node} | | ... | ${vlan1_index} | translate-1-2 | push_dot1q=${False} @@ -299,115 +222,31 @@ | | ... | ${bd_id1} | | Then Run Keyword And Expect Error | ICMP echo Rx timeout | | ... | Send and receive ICMP Packet | ${tg_node} | ${tg_to_dut1} -| | ... | ${tg_to_dut2} | src_ip=${src_ip} | dst_ip=${dst_ip} | encaps=Dot1q -| | ... | vlan1=${outer_vlan_id1} +| | ... | ${tg_to_dut2} | encaps=Dot1q | vlan1=${outer_vlan_id1} -| TC07: DUT1 and DUT2 with L2BD and VLAN translate-2-1 (DUT1) switch ICMPv6 between two TG links +| TC05: DUT1 and DUT2 with L2BD and VLAN translate-1-2 (DUT1) switch ICMPv6 between two TG links | | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1, \ -| | ... | Eth-dot1q-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv6-ICMPv6 on TG-DUT1, \ +| | ... | Eth-dot1ad-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. | | ... | [Cfg] On DUT1 configure L2 bridge domain (L2BD) with one interface to -| | ... | DUT2 and one Dot1ad sub-interface towards TG with VLAN tag rewrite -| | ... | translate-2-1 method; on DUT2 configure L2 bridge domain (L2BD) with -| | ... | one interface to TG and one VLAN sub-interface towards DUT1 with -| | ... | VLAN tag rewrite pop-1 method. [Ver] Make TG send ICMPv6 Echo Req -| | ... | tagged with Dot1ad tags from one of its interfaces to another one +| | ... | DUT2 and one VLAN sub-interface towards TG with VLAN tag rewrite +| | ... | translate-1-2 method; on DUT2 configure L2 bridge domain (L2BD) with +| | ... | one interface to TG and one Dot1ad sub-interface towards DUT1 with +| | ... | VLAN tag rewrite pop-2 method. [Ver] Make TG send ICMPv6 Echo Req +| | ... | tagged with one Dot1q tag from one of its interfaces to another one | | ... | via DUT1 and DUT2; verify that packet is received. | | ... | [Ref] IEEE 802.1q, IEEE 802.1ad | | Given Path for 3-node testing is set | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} | | And Interfaces in 3-node path are up -| | ${vlan1_name} | ${vlan1_index}= | When Tagged Subinterface Created -| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} -| | ... | type_subif=two_tags dot1ad -| | ${vlan2_name} | ${vlan2_index}= | And Vlan Subinterface Created -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${outer_vlan_id2} -| | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node} -| | ... | ${vlan1_index} | translate-2-1 | tag1_id=${outer_vlan_id2} -| | And L2 Tag Rewrite Method Is Set On Interface | ${dut2_node} -| | ... | ${vlan2_index} | pop-1 -| | And Bridge domain on DUT node is created | ${dut1_node} | ${bd_id1} -| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_dut2} -| | ... | ${bd_id1} -| | And Interface is added to bridge domain | ${dut1_node} | ${vlan1_index} -| | ... | ${bd_id1} -| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id1} -| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg} -| | ... | ${bd_id1} -| | And Interface is added to bridge domain | ${dut2_node} | ${vlan2_index} -| | ... | ${bd_id1} -| | Then Send and receive ICMP Packet -| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} | src_ip=${src_ip} -| | ... | dst_ip=${dst_ip} | encaps=Dot1ad | vlan1=${outer_vlan_id1} -| | ... | vlan2=${inner_vlan_id1} - -| TC08: DUT1 and DUT2 with L2BD and VLAN translate-2-1 with wrong tag used (DUT1) switch ICMPv6 between two TG links -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1, \ -| | ... | Eth-dot1q-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. -| | ... | [Cfg] On DUT1 configure L2 bridge domain (L2BD) with one interface to -| | ... | DUT2 and one Dot1ad sub-interface towards TG with VLAN tag rewrite -| | ... | translate-2-1 method to set tag different from tag set on VLAN -| | ... | sub-interface of DUT2; on DUT2 configure L2 bridge domain (L2BD) with -| | ... | one interface to TG and one VLAN sub-interface towards DUT1 with -| | ... | VLAN tag rewrite pop-1 method. [Ver] Make TG send ICMPv6 Echo Req -| | ... | tagged with Dot1ad tags from one of its interfaces to another one -| | ... | via DUT1 and DUT2; verify that packet is not received. -| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad -| | [Tags] | SKIP_PATCH -| | Given Path for 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in 3-node path are up -| | ${vlan1_name} | ${vlan1_index}= | When Tagged Subinterface Created -| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} -| | ... | type_subif=two_tags dot1ad -| | ${vlan2_name} | ${vlan2_index}= | And Vlan Subinterface Created -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${outer_vlan_id2} -| | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node} -| | ... | ${vlan1_index} | translate-2-1 | tag1_id=${outer_vlan_wrong} -| | And L2 Tag Rewrite Method Is Set On Interface | ${dut2_node} -| | ... | ${vlan2_index} | pop-1 -| | And Bridge domain on DUT node is created | ${dut1_node} | ${bd_id1} -| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_dut2} -| | ... | ${bd_id1} -| | And Interface is added to bridge domain | ${dut1_node} | ${vlan1_index} -| | ... | ${bd_id1} -| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id1} -| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg} -| | ... | ${bd_id1} -| | And Interface is added to bridge domain | ${dut2_node} | ${vlan2_index} -| | ... | ${bd_id1} -| | Then Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Send and receive ICMP Packet | ${tg_node} | ${tg_to_dut1} -| | ... | ${tg_to_dut2} | src_ip=${src_ip} | dst_ip=${dst_ip} | encaps=Dot1ad -| | ... | vlan1=${outer_vlan_id1} | vlan2=${inner_vlan_id1} - -| TC09: DUT1 and DUT2 with L2BD and VLAN translate-2-2 switch ICMPv6 between two TG links -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1 and \ -| | ... | on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. [Cfg] On DUT1 configure L2 -| | ... | bridge domain (L2BD) with one interface to DUT2 and one Dot1ad -| | ... | sub-interface towards TG with VLAN tag rewrite translate-2-2 method; -| | ... | on DUT2 configure L2 bridge domain (L2BD) with one interface to TG and -| | ... | one Dot1ad sub-interface towards DUT1 with VLAN tag rewrite pop-1 -| | ... | tagged with Dot1ad tags from one of its interfaces to another one -| | ... | method. [Ver] Make TG send ICMPv6 Echo Req via DUT1 and DUT2; verify -| | ... | that packet is received. [Ref] IEEE 802.1ad -| | Given Path for 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in 3-node path are up -| | ${vlan1_name} | ${vlan1_index}= | When Tagged Subinterface Created -| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} -| | ... | type_subif=two_tags dot1ad +| | ${vlan1_name} | ${vlan1_index}= | When Vlan Subinterface Created +| | ... | ${dut1_node} | ${dut1_to_tg} | ${outer_vlan_id1} | | ${vlan2_name} | ${vlan2_index}= | And Tagged Subinterface Created | | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} | | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2} | | ... | type_subif=two_tags dot1ad | | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node} -| | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False} +| | ... | ${vlan1_index} | translate-1-2 | push_dot1q=${False} | | ... | tag1_id=${outer_vlan_id2} | tag2_id=${inner_vlan_id2} | | And L2 Tag Rewrite Method Is Set On Interface | ${dut2_node} | | ... | ${vlan2_index} | pop-2 @@ -422,36 +261,34 @@ | | And Interface is added to bridge domain | ${dut2_node} | ${vlan2_index} | | ... | ${bd_id1} | | Then Send and receive ICMP Packet -| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} | src_ip=${src_ip} -| | ... | dst_ip=${dst_ip} | encaps=Dot1ad | vlan1=${outer_vlan_id1} -| | ... | vlan2=${inner_vlan_id1} +| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} | src_ip=${src_ip6} +| | ... | dst_ip=${dst_ip6} | encaps=Dot1q | vlan1=${outer_vlan_id1} -| TC10: DUT1 and DUT2 with L2BD and VLAN translate-2-2 with wrong inner tag used (DUT1) switch ICMPv6 between two TG links +| TC06: DUT1 and DUT2 with L2BD and VLAN translate-1-2 with wrong inner tag used (DUT1) switch ICMPv6 between two TG links | | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1 and \ -| | ... | on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. [Cfg] On DUT1 configure L2 -| | ... | bridge domain (L2BD) with one interface to DUT2 and one Dot1ad -| | ... | sub-interface towards TG with VLAN tag rewrite translate-2-2 method to -| | ... | set inner tag different from inner tag set on Dot1ad sub-interface of -| | ... | DUT2; on DUT2 configure L2 bridge domain (L2BD) with one interface to -| | ... | TG and one Dot1ad sub-interface towards DUT1 with VLAN tag rewrite -| | ... | pop-1 tagged with Dot1ad tags from one of its interfaces to another -| | ... | one method. [Ver] Make TG send ICMPv6 Echo Req via DUT1 and DUT2; -| | ... | verify that packet is not received. [Ref] IEEE 802.1ad +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv6-ICMPv6 on TG-DUT1, \ +| | ... | Eth-dot1ad-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. +| | ... | [Cfg] On DUT1 configure L2 bridge domain (L2BD) with one interface to +| | ... | DUT2 and one VLAN sub-interface towards TG with VLAN tag rewrite +| | ... | translate-1-2 method to set inner tag different from inner tag set on +| | ... | Dot1ad sub-interface of DUT2; on DUT2 configure L2 bridge domain with +| | ... | one interface to TG and one Dot1ad sub-interface towards DUT1 with +| | ... | VLAN tag rewrite pop-2 method. [Ver] Make TG send ICMPv6 Echo Req +| | ... | tagged with one Dot1q tag from one of its interfaces to another one +| | ... | via DUT1 and DUT2; verify that packet is not received. +| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad | | [Tags] | SKIP_PATCH | | Given Path for 3-node testing is set | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} | | And Interfaces in 3-node path are up -| | ${vlan1_name} | ${vlan1_index}= | When Tagged Subinterface Created -| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} -| | ... | type_subif=two_tags dot1ad +| | ${vlan1_name} | ${vlan1_index}= | When Vlan Subinterface Created +| | ... | ${dut1_node} | ${dut1_to_tg} | ${outer_vlan_id1} | | ${vlan2_name} | ${vlan2_index}= | And Tagged Subinterface Created | | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} | | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2} | | ... | type_subif=two_tags dot1ad | | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node} -| | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False} +| | ... | ${vlan1_index} | translate-1-2 | push_dot1q=${False} | | ... | tag1_id=${outer_vlan_id2} | tag2_id=${inner_vlan_wrong} | | And L2 Tag Rewrite Method Is Set On Interface | ${dut2_node} | | ... | ${vlan2_index} | pop-2 @@ -467,35 +304,34 @@ | | ... | ${bd_id1} | | Then Run Keyword And Expect Error | ICMP echo Rx timeout | | ... | Send and receive ICMP Packet | ${tg_node} | ${tg_to_dut1} -| | ... | ${tg_to_dut2} | src_ip=${src_ip} | dst_ip=${dst_ip} | encaps=Dot1ad -| | ... | vlan1=${outer_vlan_id1} | vlan2=${inner_vlan_id1} +| | ... | ${tg_to_dut2} | src_ip=${src_ip6} | dst_ip=${dst_ip6} | encaps=Dot1q +| | ... | vlan1=${outer_vlan_id1} -| TC11: DUT1 and DUT2 with L2BD and VLAN translate-2-2 with wrong outer tag used (DUT1) switch ICMPv6 between two TG links +| TC07: DUT1 and DUT2 with L2BD and VLAN translate-1-2 with wrong outer tag used (DUT1) switch ICMPv6 between two TG links | | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1 and \ -| | ... | on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. [Cfg] On DUT1 configure L2 -| | ... | bridge domain (L2BD) with one interface to DUT2 and one Dot1ad -| | ... | sub-interface towards TG with VLAN tag rewrite translate-2-2 method to -| | ... | set outer tag different from outer tag set on Dot1ad sub-interface of -| | ... | DUT2; on DUT2 configure L2 bridge domain (L2BD) with one interface to -| | ... | TG and one Dot1ad sub-interface towards DUT1 with VLAN tag rewrite -| | ... | pop-1 tagged with Dot1ad tags from one of its interfaces to another -| | ... | one method. [Ver] Make TG send ICMPv6 Echo Req via DUT1 and DUT2; -| | ... | verify that packet is not received. [Ref] IEEE 802.1ad +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv6-ICMPv6 on TG-DUT1, \ +| | ... | Eth-dot1ad-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. +| | ... | [Cfg] On DUT1 configure L2 bridge domain (L2BD) with one interface to +| | ... | DUT2 and one VLAN sub-interface towards TG with VLAN tag rewrite +| | ... | translate-1-2 method to set outer tag different from outer tag set on +| | ... | Dot1ad sub-interface of DUT2; on DUT2 configure L2 bridge domain with +| | ... | one interface to TG and one Dot1ad sub-interface towards DUT1 with +| | ... | VLAN tag rewrite pop-2 method. [Ver] Make TG send ICMPv6 Echo Req +| | ... | tagged with one Dot1q tag from one of its interfaces to another one +| | ... | via DUT1 and DUT2; verify that packet is not received. +| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad | | [Tags] | SKIP_PATCH | | Given Path for 3-node testing is set | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} | | And Interfaces in 3-node path are up -| | ${vlan1_name} | ${vlan1_index}= | When Tagged Subinterface Created -| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} -| | ... | type_subif=two_tags dot1ad +| | ${vlan1_name} | ${vlan1_index}= | When Vlan Subinterface Created +| | ... | ${dut1_node} | ${dut1_to_tg} | ${outer_vlan_id1} | | ${vlan2_name} | ${vlan2_index}= | And Tagged Subinterface Created | | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} | | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2} | | ... | type_subif=two_tags dot1ad | | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node} -| | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False} +| | ... | ${vlan1_index} | translate-1-2 | push_dot1q=${False} | | ... | tag1_id=${outer_vlan_wrong} | tag2_id=${inner_vlan_id2} | | And L2 Tag Rewrite Method Is Set On Interface | ${dut2_node} | | ... | ${vlan2_index} | pop-2 @@ -511,35 +347,34 @@ | | ... | ${bd_id1} | | Then Run Keyword And Expect Error | ICMP echo Rx timeout | | ... | Send and receive ICMP Packet | ${tg_node} | ${tg_to_dut1} -| | ... | ${tg_to_dut2} | src_ip=${src_ip} | dst_ip=${dst_ip} | encaps=Dot1ad -| | ... | vlan1=${outer_vlan_id1} | vlan2=${inner_vlan_id1} +| | ... | ${tg_to_dut2} | src_ip=${src_ip6} | dst_ip=${dst_ip6} | encaps=Dot1q +| | ... | vlan1=${outer_vlan_id1} -| TC12: DUT1 and DUT2 with L2BD and VLAN translate-2-2 with wrong outer and inner tags used (DUT1) switch ICMPv6 between two TG links +| TC08: DUT1 and DUT2 with L2BD and VLAN translate-1-2 with wrong outer and inner tag used (DUT1) switch ICMPv6 between two TG links | | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1 and \ -| | ... | on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. [Cfg] On DUT1 configure L2 -| | ... | bridge domain (L2BD) with one interface to DUT2 and one Dot1ad -| | ... | sub-interface towards TG with VLAN tag rewrite translate-2-2 method to -| | ... | set tags different from tags set on Dot1ad sub-interface of DUT2; -| | ... | on DUT2 configure L2 bridge domain (L2BD) with one interface to TG -| | ... | and one Dot1ad sub-interface towards DUT1 with VLAN tag rewrite pop-1 -| | ... | tagged with Dot1ad tags from one of its interfaces to another one -| | ... | method. [Ver] Make TG send ICMPv6 Echo Req via DUT1 and DUT2; verify -| | ... | that packet is not received. [Ref] IEEE 802.1ad +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv6-ICMPv6 on TG-DUT1, \ +| | ... | Eth-dot1ad-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. +| | ... | [Cfg] On DUT1 configure L2 bridge domain (L2BD) with one interface to +| | ... | DUT2 and one VLAN sub-interface towards TG with VLAN tag rewrite +| | ... | translate-1-2 method to set outer and inner tags different from tags +| | ... | set on Dot1ad sub-interface of DUT2; on DUT2 configure L2 +| | ... | bridge domain with one interface to TG and one Dot1ad sub-interface +| | ... | towards DUT1 with VLAN tag rewrite pop-2 method. [Ver] Make TG send +| | ... | ICMPv6 Echo Req tagged with one Dot1q tag from one of its interfaces +| | ... | to another one via DUT1 and DUT2; verify that packet is not received. +| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad | | [Tags] | SKIP_PATCH | | Given Path for 3-node testing is set | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} | | And Interfaces in 3-node path are up -| | ${vlan1_name} | ${vlan1_index}= | When Tagged Subinterface Created -| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} -| | ... | type_subif=two_tags dot1ad +| | ${vlan1_name} | ${vlan1_index}= | When Vlan Subinterface Created +| | ... | ${dut1_node} | ${dut1_to_tg} | ${outer_vlan_id1} | | ${vlan2_name} | ${vlan2_index}= | And Tagged Subinterface Created | | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} | | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2} | | ... | type_subif=two_tags dot1ad | | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node} -| | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False} +| | ... | ${vlan1_index} | translate-1-2 | push_dot1q=${False} | | ... | tag1_id=${outer_vlan_wrong} | tag2_id=${inner_vlan_wrong} | | And L2 Tag Rewrite Method Is Set On Interface | ${dut2_node} | | ... | ${vlan2_index} | pop-2 @@ -555,5 +390,5 @@ | | ... | ${bd_id1} | | Then Run Keyword And Expect Error | ICMP echo Rx timeout | | ... | Send and receive ICMP Packet | ${tg_node} | ${tg_to_dut1} -| | ... | ${tg_to_dut2} | src_ip=${src_ip} | dst_ip=${dst_ip} | encaps=Dot1ad -| | ... | vlan1=${outer_vlan_id1} | vlan2=${inner_vlan_id1} +| | ... | ${tg_to_dut2} | src_ip=${src_ip6} | dst_ip=${dst_ip6} | encaps=Dot1q +| | ... | vlan1=${outer_vlan_id1} diff --git a/tests/func/vlan/vlan_tag_translate_l2_xconnect_ipv4.robot b/tests/func/vlan/eth2p-dot1q--dot1ad-l2xcbase-vlantrans12-func.robot index bfca6d8f4a..98f43799c0 100644 --- a/tests/func/vlan/vlan_tag_translate_l2_xconnect_ipv4.robot +++ b/tests/func/vlan/eth2p-dot1q--dot1ad-l2xcbase-vlantrans12-func.robot @@ -20,18 +20,19 @@ | Force Tags | 3_NODE_SINGLE_LINK_TOPO | HW_ENV | VM_ENV | Test Setup | Func Test Setup | Test Teardown | Func Test Teardown -| Documentation | *L2 cross-connect with VLAN tag rewrite test cases - IPv4* +| Documentation | *L2XC with VLAN tag rewrite test cases - translate-1-2* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology | ... | with single links between nodes. | ... | *[Enc] Packet encapsulations:* Eth-dot1q-IPv4-ICMPv4 or -| ... | Eth-dot1ad-IPv4-ICMPv4 on TG-DUT1 and DUT1-DUT2, Eth-IPv4-ICMPv4 -| ... | on TG-DUT2 for L2 switching of IPv4. +| ... | Eth-dot1q-IPv6-ICMPv6 on TG-DUT1, Eth-dot1ad-IPv4-ICMPv4 or +| ... | Eth-dot1ad-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv4-ICMPv4 or Eth-IPv6-ICMPv6 +| ... | on TG-DUT2 for L2 switching of IPv4/IPv6. | ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 cross-connect | ... | (L2XC) switching between VLAN sub-interface with VLAN tag rewrite -| ... | translate-1-1 method of interface towards TG and interface towards DUT2. +| ... | translate-1-2 method of interface towards TG and interface towards DUT2. | ... | DUT2 is configured configured with L2 cross-connect (L2XC) switching -| ... | between VLAN sub-interface with VLAN tag rewrite pop-1 method +| ... | between VLAN sub-interface with VLAN tag rewrite pop-2 method | ... | of interface towards DUT1 and interface towards TG. | ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are | ... | sent from TG on link to DUT1 and received in TG on link form DUT2; @@ -41,74 +42,20 @@ *** Variables *** | ${subid}= | 10 + | ${outer_vlan_id1}= | 110 | ${outer_vlan_id2}= | 120 | ${outer_vlan_wrong}= | 150 + | ${inner_vlan_id1}= | 210 | ${inner_vlan_id2}= | 220 | ${inner_vlan_wrong}= | 250 -*** Test Cases *** -| TC01: DUT1 and DUT2 with L2XC and VLAN translate-1-1 (DUT1) switch ICMPv4 between two TG links -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv4-ICMPv4 on TG-DUT1 and \ -| | ... | DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. [Cfg] On DUT1 configure L2 -| | ... | cross-connect (L2XC) with one interface to DUT2 and one VLAN -| | ... | sub-interface towards TG with VLAN tag rewrite translate-1-1 method; -| | ... | on DUT2 configure L2 cross-connect (L2XC) with one interface to TG -| | ... | and one VLAN sub-interface towards DUT1 with VLAN tag rewrite pop-1 -| | ... | method. [Ver] Make TG send ICMPv4 Echo Req tagged with one Dot1q tag -| | ... | from one of its interfaces to another one via DUT1 and DUT2; verify -| | ... | that packet is received. [Ref] IEEE 802.1q -| | Given Path for 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in 3-node path are up -| | ${vlan1_name} | ${vlan1_index}= | When Vlan Subinterface Created -| | ... | ${dut1_node} | ${dut1_to_tg} | ${outer_vlan_id1} -| | ${vlan2_name} | ${vlan2_index}= | And Vlan Subinterface Created -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${outer_vlan_id2} -| | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node} -| | ... | ${vlan1_index} | translate-1-1 | tag1_id=${outer_vlan_id2} -| | And L2 Tag Rewrite Method Is Set On Interface | ${dut2_node} -| | ... | ${vlan2_index} | pop-1 -| | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index} -| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index} -| | Then Send and receive ICMP Packet -| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} | encaps=Dot1q -| | ... | vlan1=${outer_vlan_id1} +| ${src_ip}= | 3ffe:63::1 +| ${dst_ip}= | 3ffe:63::2 -| TC02: DUT1 and DUT2 with L2XC and VLAN translate-1-1 with wrong tag used (DUT1) switch ICMPv4 between two TG links -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv4-ICMPv4 on TG-DUT1 and \ -| | ... | DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. [Cfg] On DUT1 configure L2 -| | ... | cross-connect (L2XC) with one VLAN tagged sub-interface to DUT2 and -| | ... | one VLAN sub-interface towards TG with VLAN tag rewrite -| | ... | (translate-1-1) on sub-interface to DUT2; on DUT2 configure L2XC with -| | ... | one interface to TG and one VLAN sub-interface towards DUT1 with VLAN -| | ... | tag pop-1. [Ver] Make TG send ICMPv4 Echo Req tagged with one dot1q -| | ... | tag from one of its interfaces to another one via DUT1 and DUT2; -| | ... | verify that packet is not received. [Ref] IEEE 802.1q -| | [Tags] | SKIP_PATCH -| | Given Path for 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in 3-node path are up -| | ${vlan1_name} | ${vlan1_index}= | When Vlan Subinterface Created -| | ... | ${dut1_node} | ${dut1_to_tg} | ${outer_vlan_id1} -| | ${vlan2_name} | ${vlan2_index}= | And Vlan Subinterface Created -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${outer_vlan_id2} -| | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node} -| | ... | ${vlan1_index} | translate-1-1 | tag1_id=${outer_vlan_wrong} -| | And L2 Tag Rewrite Method Is Set On Interface | ${dut2_node} -| | ... | ${vlan2_index} | pop-1 -| | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index} -| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index} -| | Then Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Send and receive ICMP Packet | ${tg_node} | ${tg_to_dut1} -| | ... | ${tg_to_dut2} | encaps=Dot1q | vlan1=${outer_vlan_id1} - -| TC03: DUT1 and DUT2 with L2XC and VLAN translate-1-2 (DUT1) switch ICMPv4 between two TG links +*** Test Cases *** +| TC01: DUT1 and DUT2 with L2XC and VLAN translate-1-2 (DUT1) switch ICMPv4 between two TG links | | [Documentation] | | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv4-ICMPv4 on TG-DUT1, \ | | ... | Eth-dot1ad-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. @@ -127,11 +74,11 @@ | | ... | ${dut1_node} | ${dut1_to_tg} | ${outer_vlan_id1} | | ${vlan2_name} | ${vlan2_index}= | And Tagged Subinterface Created | | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2} +| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id1} | | ... | type_subif=two_tags dot1ad | | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node} | | ... | ${vlan1_index} | translate-1-2 | push_dot1q=${False} -| | ... | tag1_id=${outer_vlan_id2} | tag2_id=${inner_vlan_id2} +| | ... | tag1_id=${outer_vlan_id2} | tag2_id=${inner_vlan_id1} | | And L2 Tag Rewrite Method Is Set On Interface | ${dut2_node} | | ... | ${vlan2_index} | pop-2 | | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect @@ -141,7 +88,7 @@ | | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} | encaps=Dot1q | | ... | vlan1=${outer_vlan_id1} -| TC04: DUT1 and DUT2 with L2XC and VLAN translate-1-2 with wrong inner tag used (DUT1) switch ICMPv4 between two TG links +| TC02: DUT1 and DUT2 with L2XC and VLAN translate-1-2 with wrong inner tag used (DUT1) switch ICMPv4 between two TG links | | [Documentation] | | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv4-ICMPv4 on TG-DUT1, \ | | ... | Eth-dot1ad-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. @@ -162,7 +109,7 @@ | | ... | ${dut1_node} | ${dut1_to_tg} | ${outer_vlan_id1} | | ${vlan2_name} | ${vlan2_index}= | And Tagged Subinterface Created | | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2} +| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id1} | | ... | type_subif=two_tags dot1ad | | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node} | | ... | ${vlan1_index} | translate-1-2 | push_dot1q=${False} @@ -176,7 +123,7 @@ | | ... | Send and receive ICMP Packet | ${tg_node} | ${tg_to_dut1} | | ... | ${tg_to_dut2} | encaps=Dot1q | vlan1=${outer_vlan_id1} -| TC05: DUT1 and DUT2 with L2XC and VLAN translate-1-2 with wrong outer tag used (DUT1) switch ICMPv4 between two TG links +| TC03: DUT1 and DUT2 with L2XC and VLAN translate-1-2 with wrong outer tag used (DUT1) switch ICMPv4 between two TG links | | [Documentation] | | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv4-ICMPv4 on TG-DUT1, \ | | ... | Eth-dot1ad-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. @@ -197,11 +144,11 @@ | | ... | ${dut1_node} | ${dut1_to_tg} | ${outer_vlan_id1} | | ${vlan2_name} | ${vlan2_index}= | And Tagged Subinterface Created | | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2} +| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id1} | | ... | type_subif=two_tags dot1ad | | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node} | | ... | ${vlan1_index} | translate-1-2 | push_dot1q=${False} -| | ... | tag1_id=${outer_vlan_wrong} | tag2_id=${inner_vlan_id2} +| | ... | tag1_id=${outer_vlan_wrong} | tag2_id=${inner_vlan_id1} | | And L2 Tag Rewrite Method Is Set On Interface | ${dut2_node} | | ... | ${vlan2_index} | pop-2 | | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect @@ -211,7 +158,7 @@ | | ... | Send and receive ICMP Packet | ${tg_node} | ${tg_to_dut1} | | ... | ${tg_to_dut2} | encaps=Dot1q | vlan1=${outer_vlan_id1} -| TC06: DUT1 and DUT2 with L2XC and VLAN translate-1-2 with wrong outer and inner tag used (DUT1) switch ICMPv4 between two TG links +| TC04: DUT1 and DUT2 with L2XC and VLAN translate-1-2 with wrong outer and inner tag used (DUT1) switch ICMPv4 between two TG links | | [Documentation] | | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv4-ICMPv4 on TG-DUT1, \ | | ... | Eth-dot1ad-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. @@ -232,7 +179,7 @@ | | ... | ${dut1_node} | ${dut1_to_tg} | ${outer_vlan_id1} | | ${vlan2_name} | ${vlan2_index}= | And Tagged Subinterface Created | | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2} +| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id1} | | ... | type_subif=two_tags dot1ad | | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node} | | ... | ${vlan1_index} | translate-1-2 | push_dot1q=${False} @@ -246,97 +193,29 @@ | | ... | Send and receive ICMP Packet | ${tg_node} | ${tg_to_dut1} | | ... | ${tg_to_dut2} | encaps=Dot1q | vlan1=${outer_vlan_id1} -| TC07: DUT1 and DUT2 with L2XC and VLAN translate-2-1 (DUT1) switch ICMPv4 between two TG links +| TC05: DUT1 and DUT2 with L2XC and VLAN translate-1-2 (DUT1) switch ICMPv6 between two TG links | | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv4-ICMPv4 on TG-DUT1, \ -| | ... | Eth-dot1q-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv6-ICMPv6 on TG-DUT1, \ +| | ... | Eth-dot1ad-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. | | ... | [Cfg] On DUT1 configure L2 cross-connect (L2XC) with one interface to -| | ... | DUT2 and one Dot1ad sub-interface towards TG with VLAN tag rewrite -| | ... | translate-2-1 method; on DUT2 configure L2 cross-connect (L2XC) with -| | ... | one interface to TG and one VLAN sub-interface towards DUT1 with -| | ... | VLAN tag rewrite pop-1 method. [Ver] Make TG send ICMPv4 Echo Req -| | ... | tagged with Dot1ad tags from one of its interfaces to another one +| | ... | DUT2 and one VLAN sub-interface towards TG with VLAN tag rewrite +| | ... | translate-1-2 method; on DUT2 configure L2 cross-connect (L2XC) with +| | ... | one interface to TG and one Dot1ad sub-interface towards DUT1 with +| | ... | VLAN tag rewrite pop-2 method. [Ver] Make TG send ICMPv6 Echo Req +| | ... | tagegd with one Dot1q tag from one of its interfaces to another one | | ... | via DUT1 and DUT2; verify that packet is received. | | ... | [Ref] IEEE 802.1q, IEEE 802.1ad | | Given Path for 3-node testing is set | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} | | And Interfaces in 3-node path are up -| | ${vlan1_name} | ${vlan1_index}= | When Tagged Subinterface Created -| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} -| | ... | type_subif=two_tags dot1ad -| | ${vlan2_name} | ${vlan2_index}= | And Vlan Subinterface Created -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${outer_vlan_id2} -| | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node} -| | ... | ${vlan1_index} | translate-2-1 | tag1_id=${outer_vlan_id2} -| | And L2 Tag Rewrite Method Is Set On Interface | ${dut2_node} -| | ... | ${vlan2_index} | pop-1 -| | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index} -| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index} -| | Then Send and receive ICMP Packet -| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} | encaps=Dot1ad -| | ... | vlan1=${outer_vlan_id1} | vlan2=${inner_vlan_id1} - -| TC08: DUT1 and DUT2 with L2XC and VLAN translate-2-1 with wrong tag used (DUT1) switch ICMPv4 between two TG links -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv4-ICMPv4 on TG-DUT1, \ -| | ... | Eth-dot1q-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. -| | ... | [Cfg] On DUT1 configure L2 cross-connect (L2XC) with one interface to -| | ... | DUT2 and one Dot1ad sub-interface towards TG with VLAN tag rewrite -| | ... | translate-2-1 method to set tag different from tag set on VLAN -| | ... | sub-interface of DUT2; on DUT2 configure L2 cross-connect (L2XC) with -| | ... | one interface to TG and one VLAN sub-interface towards DUT1 with -| | ... | VLAN tag rewrite pop-1 method. [Ver] Make TG send ICMPv4 Echo Req -| | ... | tagged with Dot1ad tags from one of its interfaces to another one -| | ... | via DUT1 and DUT2; verify that packet is not received. -| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad -| | [Tags] | SKIP_PATCH -| | Given Path for 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in 3-node path are up -| | ${vlan1_name} | ${vlan1_index}= | When Tagged Subinterface Created -| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} -| | ... | type_subif=two_tags dot1ad -| | ${vlan2_name} | ${vlan2_index}= | And Vlan Subinterface Created -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${outer_vlan_id2} -| | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node} -| | ... | ${vlan1_index} | translate-2-1 | tag1_id=${outer_vlan_wrong} -| | And L2 Tag Rewrite Method Is Set On Interface | ${dut2_node} -| | ... | ${vlan2_index} | pop-1 -| | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index} -| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index} -| | Then Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Send and receive ICMP Packet | ${tg_node} | ${tg_to_dut1} -| | ... | ${tg_to_dut2} | encaps=Dot1ad | vlan1=${outer_vlan_id1} -| | ... | vlan2=${inner_vlan_id1} - -| TC09: DUT1 and DUT2 with L2XC and VLAN translate-2-2 switch ICMPv4 between two TG links -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv4-ICMPv4 on TG-DUT1 and \ -| | ... | on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. [Cfg] On DUT1 configure L2 -| | ... | cross-connect (L2XC) with one interface to DUT2 and one Dot1ad -| | ... | sub-interface towards TG with VLAN tag rewrite translate-2-2 method; -| | ... | on DUT2 configure L2 cross-connect (L2XC) with one interface to TG and -| | ... | one Dot1ad sub-interface towards DUT1 with VLAN tag rewrite pop-1 -| | ... | tagged with Dot1ad tags from one of its interfaces to another one -| | ... | method. [Ver] Make TG send ICMPv4 Echo Req via DUT1 and DUT2; verify -| | ... | that packet is received. [Ref] IEEE 802.1ad -| | Given Path for 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in 3-node path are up -| | ${vlan1_name} | ${vlan1_index}= | When Tagged Subinterface Created -| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} -| | ... | type_subif=two_tags dot1ad +| | ${vlan1_name} | ${vlan1_index}= | When Vlan Subinterface Created +| | ... | ${dut1_node} | ${dut1_to_tg} | ${outer_vlan_id1} | | ${vlan2_name} | ${vlan2_index}= | And Tagged Subinterface Created | | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} | | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2} | | ... | type_subif=two_tags dot1ad | | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node} -| | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False} +| | ... | ${vlan1_index} | translate-1-2 | push_dot1q=${False} | | ... | tag1_id=${outer_vlan_id2} | tag2_id=${inner_vlan_id2} | | And L2 Tag Rewrite Method Is Set On Interface | ${dut2_node} | | ... | ${vlan2_index} | pop-2 @@ -344,35 +223,34 @@ | | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index} | | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index} | | Then Send and receive ICMP Packet -| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} | encaps=Dot1ad -| | ... | vlan1=${outer_vlan_id1} | vlan2=${inner_vlan_id1} +| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} | src_ip=${src_ip} +| | ... | dst_ip=${dst_ip} | encaps=Dot1q | vlan1=${outer_vlan_id1} -| TC10: DUT1 and DUT2 with L2XC and VLAN translate-2-2 with wrong inner tag used (DUT1) switch ICMPv4 between two TG links +| TC06: DUT1 and DUT2 with L2XC and VLAN translate-1-2 with wrong inner tag used (DUT1) switch ICMPv6 between two TG links | | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv4-ICMPv4 on TG-DUT1 and \ -| | ... | on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. [Cfg] On DUT1 configure L2 -| | ... | cross-connect (L2XC) with one interface to DUT2 and one Dot1ad -| | ... | sub-interface towards TG with VLAN tag rewrite translate-2-2 method to -| | ... | set inner tag different from inner tag set on Dot1ad sub-interface of -| | ... | DUT2; on DUT2 configure L2 cross-connect (L2XC) with one interface to -| | ... | TG and one Dot1ad sub-interface towards DUT1 with VLAN tag rewrite -| | ... | pop-1 tagged with Dot1ad tags from one of its interfaces to another one -| | ... | method. [Ver] Make TG send ICMPv4 Echo Req via DUT1 and DUT2; verify -| | ... | that packet is not received. [Ref] IEEE 802.1ad +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv6-ICMPv6 on TG-DUT1, \ +| | ... | Eth-dot1ad-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. +| | ... | [Cfg] On DUT1 configure L2 cross-connect (L2XC) with one interface to +| | ... | DUT2 and one VLAN sub-interface towards TG with VLAN tag rewrite +| | ... | translate-1-2 method to set inner tag different from inner tag set on +| | ... | Dot1ad sub-interface of DUT2; on DUT2 configure L2 cross-connect with +| | ... | one interface to TG and one Dot1ad sub-interface towards DUT1 with +| | ... | VLAN tag rewrite pop-2 method. [Ver] Make TG send ICMPv6 Echo Req +| | ... | tagegd with one Dot1q tag from one of its interfaces to another one +| | ... | via DUT1 and DUT2; verify that packet is not received. +| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad | | [Tags] | SKIP_PATCH | | Given Path for 3-node testing is set | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} | | And Interfaces in 3-node path are up -| | ${vlan1_name} | ${vlan1_index}= | When Tagged Subinterface Created -| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} -| | ... | type_subif=two_tags dot1ad +| | ${vlan1_name} | ${vlan1_index}= | When Vlan Subinterface Created +| | ... | ${dut1_node} | ${dut1_to_tg} | ${outer_vlan_id1} | | ${vlan2_name} | ${vlan2_index}= | And Tagged Subinterface Created | | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} | | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2} | | ... | type_subif=two_tags dot1ad | | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node} -| | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False} +| | ... | ${vlan1_index} | translate-1-2 | push_dot1q=${False} | | ... | tag1_id=${outer_vlan_id2} | tag2_id=${inner_vlan_wrong} | | And L2 Tag Rewrite Method Is Set On Interface | ${dut2_node} | | ... | ${vlan2_index} | pop-2 @@ -381,35 +259,34 @@ | | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index} | | Then Run Keyword And Expect Error | ICMP echo Rx timeout | | ... | Send and receive ICMP Packet | ${tg_node} | ${tg_to_dut1} -| | ... | ${tg_to_dut2} | encaps=Dot1ad | vlan1=${outer_vlan_id1} -| | ... | vlan2=${inner_vlan_id1} +| | ... | ${tg_to_dut2} | src_ip=${src_ip} | dst_ip=${dst_ip} | encaps=Dot1q +| | ... | vlan1=${outer_vlan_id1} -| TC11: DUT1 and DUT2 with L2XC and VLAN translate-2-2 with wrong outer tag used (DUT1) switch ICMPv4 between two TG links +| TC07: DUT1 and DUT2 with L2XC and VLAN translate-1-2 with wrong outer tag used (DUT1) switch ICMPv6 between two TG links | | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv4-ICMPv4 on TG-DUT1 and \ -| | ... | on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. [Cfg] On DUT1 configure L2 -| | ... | cross-connect (L2XC) with one interface to DUT2 and one Dot1ad -| | ... | sub-interface towards TG with VLAN tag rewrite translate-2-2 method to -| | ... | set outer tag different from outer tag set on Dot1ad sub-interface of -| | ... | DUT2; on DUT2 configure L2 cross-connect (L2XC) with one interface to -| | ... | TG and one Dot1ad sub-interface towards DUT1 with VLAN tag rewrite -| | ... | pop-1 tagged with Dot1ad tags from one of its interfaces to another -| | ... | one method. [Ver] Make TG send ICMPv4 Echo Req via DUT1 and DUT2; -| | ... | verify that packet is not received. [Ref] IEEE 802.1ad +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv6-ICMPv6 on TG-DUT1, \ +| | ... | Eth-dot1ad-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. +| | ... | [Cfg] On DUT1 configure L2 cross-connect (L2XC) with one interface to +| | ... | DUT2 and one VLAN sub-interface towards TG with VLAN tag rewrite +| | ... | translate-1-2 method to set outer tag different from outer tag set on +| | ... | Dot1ad sub-interface of DUT2; on DUT2 configure L2 cross-connect with +| | ... | one interface to TG and one Dot1ad sub-interface towards DUT1 with +| | ... | VLAN tag rewrite pop-2 method. [Ver] Make TG send ICMPv6 Echo Req +| | ... | tagegd with one Dot1q tag from one of its interfaces to another one +| | ... | via DUT1 and DUT2; verify that packet is not received. +| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad | | [Tags] | SKIP_PATCH | | Given Path for 3-node testing is set | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} | | And Interfaces in 3-node path are up -| | ${vlan1_name} | ${vlan1_index}= | When Tagged Subinterface Created -| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} -| | ... | type_subif=two_tags dot1ad +| | ${vlan1_name} | ${vlan1_index}= | When Vlan Subinterface Created +| | ... | ${dut1_node} | ${dut1_to_tg} | ${outer_vlan_id1} | | ${vlan2_name} | ${vlan2_index}= | And Tagged Subinterface Created | | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} | | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2} | | ... | type_subif=two_tags dot1ad | | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node} -| | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False} +| | ... | ${vlan1_index} | translate-1-2 | push_dot1q=${False} | | ... | tag1_id=${outer_vlan_wrong} | tag2_id=${inner_vlan_id2} | | And L2 Tag Rewrite Method Is Set On Interface | ${dut2_node} | | ... | ${vlan2_index} | pop-2 @@ -418,35 +295,34 @@ | | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index} | | Then Run Keyword And Expect Error | ICMP echo Rx timeout | | ... | Send and receive ICMP Packet | ${tg_node} | ${tg_to_dut1} -| | ... | ${tg_to_dut2} | encaps=Dot1ad | vlan1=${outer_vlan_id1} -| | ... | vlan2=${inner_vlan_id1} +| | ... | ${tg_to_dut2} | src_ip=${src_ip} | dst_ip=${dst_ip} | encaps=Dot1q +| | ... | vlan1=${outer_vlan_id1} -| TC12: DUT1 and DUT2 with L2XC and VLAN translate-2-2 with wrong outer and inner tags used (DUT1) switch ICMPv4 between two TG links +| TC08: DUT1 and DUT2 with L2XC and VLAN translate-1-2 with wrong outer and inner tag used (DUT1) switch ICMPv6 between two TG links | | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv4-ICMPv4 on TG-DUT1 and \ -| | ... | on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. [Cfg] On DUT1 configure L2 -| | ... | cross-connect (L2XC) with one interface to DUT2 and one Dot1ad -| | ... | sub-interface towards TG with VLAN tag rewrite translate-2-2 method to -| | ... | set tags different from tags set on Dot1ad sub-interface of DUT2; -| | ... | on DUT2 configure L2 cross-connect (L2XC) with one interface to TG -| | ... | and one Dot1ad sub-interface towards DUT1 with VLAN tag rewrite pop-1 -| | ... | tagged with Dot1ad tags from one of its interfaces to another one -| | ... | method. [Ver] Make TG send ICMPv4 Echo Req via DUT1 and DUT2; verify -| | ... | that packet is not received. [Ref] IEEE 802.1ad +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv6-ICMPv6 on TG-DUT1, \ +| | ... | Eth-dot1ad-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. +| | ... | [Cfg] On DUT1 configure L2 cross-connect (L2XC) with one interface to +| | ... | DUT2 and one VLAN sub-interface towards TG with VLAN tag rewrite +| | ... | translate-1-2 method to set outer and inner tags different from tags +| | ... | set on Dot1ad sub-interface of DUT2; on DUT2 configure L2 +| | ... | cross-connect with one interface to TG and one Dot1ad sub-interface +| | ... | towards DUT1 with VLAN tag rewrite pop-2 method. [Ver] Make TG send +| | ... | ICMPv6 Echo Req tagegd with one Dot1q tag from one of its interfaces +| | ... | to another one via DUT1 and DUT2; verify that packet is not received. +| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad | | [Tags] | SKIP_PATCH | | Given Path for 3-node testing is set | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} | | And Interfaces in 3-node path are up -| | ${vlan1_name} | ${vlan1_index}= | When Tagged Subinterface Created -| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} -| | ... | type_subif=two_tags dot1ad +| | ${vlan1_name} | ${vlan1_index}= | When Vlan Subinterface Created +| | ... | ${dut1_node} | ${dut1_to_tg} | ${outer_vlan_id1} | | ${vlan2_name} | ${vlan2_index}= | And Tagged Subinterface Created | | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} | | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2} | | ... | type_subif=two_tags dot1ad | | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node} -| | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False} +| | ... | ${vlan1_index} | translate-1-2 | push_dot1q=${False} | | ... | tag1_id=${outer_vlan_wrong} | tag2_id=${inner_vlan_wrong} | | And L2 Tag Rewrite Method Is Set On Interface | ${dut2_node} | | ... | ${vlan2_index} | pop-2 @@ -455,5 +331,5 @@ | | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index} | | Then Run Keyword And Expect Error | ICMP echo Rx timeout | | ... | Send and receive ICMP Packet | ${tg_node} | ${tg_to_dut1} -| | ... | ${tg_to_dut2} | encaps=Dot1ad | vlan1=${outer_vlan_id1} -| | ... | vlan2=${inner_vlan_id1} +| | ... | ${tg_to_dut2} | src_ip=${src_ip} | dst_ip=${dst_ip} | encaps=Dot1q +| | ... | vlan1=${outer_vlan_id1} diff --git a/tests/func/vlan/eth2p-dot1q-l2bdbasemaclrn-vlantrans11-func.robot b/tests/func/vlan/eth2p-dot1q-l2bdbasemaclrn-vlantrans11-func.robot new file mode 100644 index 0000000000..a0c245e51d --- /dev/null +++ b/tests/func/vlan/eth2p-dot1q-l2bdbasemaclrn-vlantrans11-func.robot @@ -0,0 +1,206 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/default.robot +| Resource | resources/libraries/robot/bridge_domain.robot +| Resource | resources/libraries/robot/testing_path.robot +| Resource | resources/libraries/robot/tagging.robot +| Resource | resources/libraries/robot/l2_traffic.robot +| Library | resources.libraries.python.Trace +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | HW_ENV | VM_ENV +| Test Setup | Func Test Setup +| Test Teardown | Func Test Teardown +| Documentation | *L2BD with VLAN tag rewrite test cases - translate-1-1* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet encapsulations:* Eth-dot1q-IPv4-ICMPv4 or +| ... | Eth-dot1q-IPv6-ICMPv6 on TG-DUT1 and DUT1-DUT2, Eth-IPv4-ICMPv4 or +| ... | Eth-IPv6-ICMPv6 on TG-DUT2 for L2 switching of IPv4/IPv6. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with bridge domain (L2BD) +| ... | switching combined with MAC learning enabled and added VLAN +| ... | sub-interface with VLAN tag rewrite translate-1-1 method of interface +| ... | towards TG and interface towards DUT2. DUT2 is configured with L2 +| ... | bridge domain (L2BD) switching between VLAN sub-interface with VLAN tag +| ... | rewrite pop-1 method of interface towards DUT1 and interface towards TG. +| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are +| ... | sent from TG on link to DUT1 and received in TG on link form DUT2; +| ... | on receive TG verifies packets for correctness and their IPv4 src-addr, +| ... | dst-addr and MAC addresses. +| ... | *[Ref] Applicable standard specifications:* IEEE 802.1q, IEEE 802.1ad. + +*** Variables *** +| ${bd_id1}= | 1 + +| ${subid}= | 10 + +| ${outer_vlan_id1}= | 110 +| ${outer_vlan_id2}= | 120 +| ${outer_vlan_wrong}= | 150 + +| ${inner_vlan_id1}= | 210 +| ${inner_vlan_wrong}= | 250 + +| ${src_ip6}= | 3ffe:63::1 +| ${dst_ip6}= | 3ffe:63::2 + +*** Test Cases *** +| TC01: DUT1 and DUT2 with L2BD and VLAN translate-1-1 (DUT1) switch ICMPv4 between two TG links +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv4-ICMPv4 on TG-DUT1 and \ +| | ... | DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. [Cfg] On DUT1 configure L2 +| | ... | bridge domain with one interface to DUT2 and one VLAN +| | ... | sub-interface towards TG with VLAN tag rewrite translate-1-1 method; +| | ... | on DUT2 configure L2 bridge domain (L2BD) with one interface to TG +| | ... | and one VLAN sub-interface towards DUT1 with VLAN tag rewrite pop-1 +| | ... | method. [Ver] Make TG send ICMPv4 Echo Req tagged with one Dot1q tag +| | ... | from one of its interfaces to another one via DUT1 and DUT2; verify +| | ... | that packet is received. [Ref] IEEE 802.1q +| | Given Path for 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in 3-node path are up +| | ${vlan1_name} | ${vlan1_index}= | When Vlan Subinterface Created +| | ... | ${dut1_node} | ${dut1_to_tg} | ${outer_vlan_id1} +| | ${vlan2_name} | ${vlan2_index}= | And Vlan Subinterface Created +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${outer_vlan_id2} +| | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node} +| | ... | ${vlan1_index} | translate-1-1 | tag1_id=${outer_vlan_id2} +| | And L2 Tag Rewrite Method Is Set On Interface | ${dut2_node} +| | ... | ${vlan2_index} | pop-1 +| | And Bridge domain on DUT node is created | ${dut1_node} | ${bd_id1} +| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_dut2} +| | ... | ${bd_id1} +| | And Interface is added to bridge domain | ${dut1_node} | ${vlan1_index} +| | ... | ${bd_id1} +| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id1} +| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg} +| | ... | ${bd_id1} +| | And Interface is added to bridge domain | ${dut2_node} | ${vlan2_index} +| | ... | ${bd_id1} +| | Then Send and receive ICMP Packet +| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} | encaps=Dot1q +| | ... | vlan1=${outer_vlan_id1} + +| TC02: DUT1 and DUT2 with L2BD and VLAN translate-1-1 with wrong tag used (DUT1) switch ICMPv4 between two TG links +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv4-ICMPv4 on TG-DUT1 and \ +| | ... | DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. [Cfg] On DUT1 configure L2 +| | ... | bridge domain (L2BD) with one interface to DUT2 and one VLAN +| | ... | sub-interface towards TG with VLAN tag rewrite translate-1-1 method +| | ... | to set tag different from tag set on VLAN sub-interface of DUT2; +| | ... | on DUT2 configure L2 bridge domain (L2BD) with one interface to TG +| | ... | and one VLAN sub-interface towards DUT1 with VLAN tag rewrite pop-1 +| | ... | method. [Ver] Make TG send ICMPv4 Echo Req tagged with one Dot1q tag +| | ... | from one of its interfaces to another one via DUT1 and DUT2; verify +| | ... | that packet is not received. [Ref] IEEE 802.1q +| | [Tags] | SKIP_PATCH +| | Given Path for 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in 3-node path are up +| | ${vlan1_name} | ${vlan1_index}= | When Vlan Subinterface Created +| | ... | ${dut1_node} | ${dut1_to_tg} | ${outer_vlan_id1} +| | ${vlan2_name} | ${vlan2_index}= | And Vlan Subinterface Created +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${outer_vlan_id2} +| | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node} +| | ... | ${vlan1_index} | translate-1-1 | tag1_id=${outer_vlan_wrong} +| | And L2 Tag Rewrite Method Is Set On Interface | ${dut2_node} +| | ... | ${vlan2_index} | pop-1 +| | And Bridge domain on DUT node is created | ${dut1_node} | ${bd_id1} +| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_dut2} +| | ... | ${bd_id1} +| | And Interface is added to bridge domain | ${dut1_node} | ${vlan1_index} +| | ... | ${bd_id1} +| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id1} +| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg} +| | ... | ${bd_id1} +| | And Interface is added to bridge domain | ${dut2_node} | ${vlan2_index} +| | ... | ${bd_id1} +| | Then Run Keyword And Expect Error | ICMP echo Rx timeout +| | ... | Send and receive ICMP Packet | ${tg_node} | ${tg_to_dut1} +| | ... | ${tg_to_dut2} | encaps=Dot1q | vlan1=${outer_vlan_id1} + +| TC03: DUT1 and DUT2 with L2BD and VLAN translate-1-1 (DUT1) switch ICMPv6 between two TG links +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv6-ICMPv6 on TG-DUT1 and \ +| | ... | DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. [Cfg] On DUT1 configure L2 +| | ... | bridge domain (L2BD) with one interface to DUT2 and one VLAN +| | ... | sub-interface towards TG with VLAN tag rewrite translate-1-1 method; +| | ... | on DUT2 configure L2 bridge domain (L2BD) with one interface to TG +| | ... | and one VLAN sub-interface towards DUT1 with VLAN tag rewrite pop-1 +| | ... | method. [Ver] Make TG send ICMPv6 Echo Req tagged with one Dot1q tag +| | ... | from one of its interfaces to another one via DUT1 and DUT2; verify +| | ... | that packet is received. [Ref] IEEE 802.1q +| | Given Path for 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in 3-node path are up +| | ${vlan1_name} | ${vlan1_index}= | When Vlan Subinterface Created +| | ... | ${dut1_node} | ${dut1_to_tg} | ${outer_vlan_id1} +| | ${vlan2_name} | ${vlan2_index}= | And Vlan Subinterface Created +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${outer_vlan_id2} +| | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node} +| | ... | ${vlan1_index} | translate-1-1 | tag1_id=${outer_vlan_id2} +| | And L2 Tag Rewrite Method Is Set On Interface | ${dut2_node} +| | ... | ${vlan2_index} | pop-1 +| | And Bridge domain on DUT node is created | ${dut1_node} | ${bd_id1} +| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_dut2} +| | ... | ${bd_id1} +| | And Interface is added to bridge domain | ${dut1_node} | ${vlan1_index} +| | ... | ${bd_id1} +| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id1} +| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg} +| | ... | ${bd_id1} +| | And Interface is added to bridge domain | ${dut2_node} | ${vlan2_index} +| | ... | ${bd_id1} +| | Then Send and receive ICMP Packet +| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} | src_ip=${src_ip6} +| | ... | dst_ip=${dst_ip6} | encaps=Dot1q | vlan1=${outer_vlan_id1} + +| TC04: DUT1 and DUT2 with L2BD and VLAN translate-1-1 with wrong tag used (DUT1) switch ICMPv6 between two TG links +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv6-ICMPv6 on TG-DUT1 and \ +| | ... | DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. [Cfg] On DUT1 configure L2 +| | ... | bridge domain (L2BD) with one interface to DUT2 and one VLAN +| | ... | sub-interface towards TG with VLAN tag rewrite translate-1-1 method +| | ... | to set tag different from tag set on VLAN sub-interface of DUT2; +| | ... | on DUT2 configure L2 bridge domain (L2BD) with one interface to TG +| | ... | and one VLAN sub-interface towards DUT1 with VLAN tag rewrite pop-1 +| | ... | method. [Ver] Make TG send ICMPv6 Echo Req tagged with one Dot1q tag +| | ... | from one of its interfaces to another one via DUT1 and DUT2; verify +| | ... | that packet is not received. [Ref] IEEE 802.1q +| | [Tags] | SKIP_PATCH +| | Given Path for 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in 3-node path are up +| | ${vlan1_name} | ${vlan1_index}= | When Vlan Subinterface Created +| | ... | ${dut1_node} | ${dut1_to_tg} | ${outer_vlan_id1} +| | ${vlan2_name} | ${vlan2_index}= | And Vlan Subinterface Created +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${outer_vlan_id2} +| | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node} +| | ... | ${vlan1_index} | translate-1-1 | tag1_id=${outer_vlan_wrong} +| | And L2 Tag Rewrite Method Is Set On Interface | ${dut2_node} +| | ... | ${vlan2_index} | pop-1 +| | And Bridge domain on DUT node is created | ${dut1_node} | ${bd_id1} +| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_dut2} +| | ... | ${bd_id1} +| | And Interface is added to bridge domain | ${dut1_node} | ${vlan1_index} +| | ... | ${bd_id1} +| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id1} +| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg} +| | ... | ${bd_id1} +| | And Interface is added to bridge domain | ${dut2_node} | ${vlan2_index} +| | ... | ${bd_id1} +| | Then Run Keyword And Expect Error | ICMP echo Rx timeout +| | ... | Send and receive ICMP Packet | ${tg_node} | ${tg_to_dut1} +| | ... | ${tg_to_dut2} | src_ip=${src_ip6} | dst_ip=${dst_ip6} | encaps=Dot1q +| | ... | vlan1=${outer_vlan_id1} diff --git a/tests/func/vlan/eth2p-dot1q-l2xcbase-vlantrans11-func.robot b/tests/func/vlan/eth2p-dot1q-l2xcbase-vlantrans11-func.robot new file mode 100644 index 0000000000..91869ba073 --- /dev/null +++ b/tests/func/vlan/eth2p-dot1q-l2xcbase-vlantrans11-func.robot @@ -0,0 +1,171 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/default.robot +| Resource | resources/libraries/robot/testing_path.robot +| Resource | resources/libraries/robot/tagging.robot +| Resource | resources/libraries/robot/l2_traffic.robot +| Library | resources.libraries.python.Trace +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | HW_ENV | VM_ENV +| Test Setup | Func Test Setup +| Test Teardown | Func Test Teardown +| Documentation | *L2XC with VLAN tag rewrite test cases - translate-1-1* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet encapsulations:* Eth-dot1q-IPv4-ICMPv4 or +| ... | Eth-dot1q-IPv6-ICMPv6 on TG-DUT1 and DUT1-DUT2, Eth-IPv4-ICMPv4 or +| ... | Eth-IPv4-ICMPv4 on TG-DUT2 for L2 switching of IPv4/IPv6. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 cross-connect +| ... | (L2XC) switching between VLAN sub-interface with VLAN tag rewrite +| ... | translate-1-1 method of interface towards TG and interface towards DUT2. +| ... | DUT2 is configured configured with L2 cross-connect (L2XC) switching +| ... | between VLAN sub-interface with VLAN tag rewrite pop-1 method +| ... | of interface towards DUT1 and interface towards TG. +| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are +| ... | sent from TG on link to DUT1 and received in TG on link form DUT2; +| ... | on receive TG verifies packets for correctness and their IPv4 src-addr, +| ... | dst-addr and MAC addresses. +| ... | *[Ref] Applicable standard specifications:* IEEE 802.1q, IEEE 802.1ad. + +*** Variables *** +| ${subid}= | 10 + +| ${outer_vlan_id1}= | 110 +| ${outer_vlan_id2}= | 120 +| ${outer_vlan_wrong}= | 150 + +| ${src_ip}= | 3ffe:63::1 +| ${dst_ip}= | 3ffe:63::2 + +*** Test Cases *** +| TC01: DUT1 and DUT2 with L2XC and VLAN translate-1-1 (DUT1) switch ICMPv4 between two TG links +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv4-ICMPv4 on TG-DUT1 and \ +| | ... | DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. [Cfg] On DUT1 configure L2 +| | ... | cross-connect (L2XC) with one interface to DUT2 and one VLAN +| | ... | sub-interface towards TG with VLAN tag rewrite translate-1-1 method; +| | ... | on DUT2 configure L2 cross-connect (L2XC) with one interface to TG +| | ... | and one VLAN sub-interface towards DUT1 with VLAN tag rewrite pop-1 +| | ... | method. [Ver] Make TG send ICMPv4 Echo Req tagged with one Dot1q tag +| | ... | from one of its interfaces to another one via DUT1 and DUT2; verify +| | ... | that packet is received. [Ref] IEEE 802.1q +| | Given Path for 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in 3-node path are up +| | ${vlan1_name} | ${vlan1_index}= | When Vlan Subinterface Created +| | ... | ${dut1_node} | ${dut1_to_tg} | ${outer_vlan_id1} +| | ${vlan2_name} | ${vlan2_index}= | And Vlan Subinterface Created +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${outer_vlan_id2} +| | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node} +| | ... | ${vlan1_index} | translate-1-1 | tag1_id=${outer_vlan_id2} +| | And L2 Tag Rewrite Method Is Set On Interface | ${dut2_node} +| | ... | ${vlan2_index} | pop-1 +| | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index} +| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index} +| | Then Send and receive ICMP Packet +| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} | encaps=Dot1q +| | ... | vlan1=${outer_vlan_id1} + +| TC02: DUT1 and DUT2 with L2XC and VLAN translate-1-1 with wrong tag used (DUT1) switch ICMPv4 between two TG links +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv4-ICMPv4 on TG-DUT1 and \ +| | ... | DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. [Cfg] On DUT1 configure L2 +| | ... | cross-connect (L2XC) with one VLAN tagged sub-interface to DUT2 and +| | ... | one VLAN sub-interface towards TG with VLAN tag rewrite +| | ... | (translate-1-1) on sub-interface to DUT2; on DUT2 configure L2XC with +| | ... | one interface to TG and one VLAN sub-interface towards DUT1 with VLAN +| | ... | tag pop-1. [Ver] Make TG send ICMPv4 Echo Req tagged with one dot1q +| | ... | tag from one of its interfaces to another one via DUT1 and DUT2; +| | ... | verify that packet is not received. [Ref] IEEE 802.1q +| | [Tags] | SKIP_PATCH +| | Given Path for 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in 3-node path are up +| | ${vlan1_name} | ${vlan1_index}= | When Vlan Subinterface Created +| | ... | ${dut1_node} | ${dut1_to_tg} | ${outer_vlan_id1} +| | ${vlan2_name} | ${vlan2_index}= | And Vlan Subinterface Created +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${outer_vlan_id2} +| | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node} +| | ... | ${vlan1_index} | translate-1-1 | tag1_id=${outer_vlan_wrong} +| | And L2 Tag Rewrite Method Is Set On Interface | ${dut2_node} +| | ... | ${vlan2_index} | pop-1 +| | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index} +| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index} +| | Then Run Keyword And Expect Error | ICMP echo Rx timeout +| | ... | Send and receive ICMP Packet | ${tg_node} | ${tg_to_dut1} +| | ... | ${tg_to_dut2} | encaps=Dot1q | vlan1=${outer_vlan_id1} + +| TC03: DUT1 and DUT2 with L2XC and VLAN translate-1-1 (DUT1) switch ICMPv6 between two TG links +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv6-ICMPv6 on TG-DUT1 and \ +| | ... | DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. [Cfg] On DUT1 configure L2 +| | ... | cross-connect (L2XC) with one interface to DUT2 and one VLAN +| | ... | sub-interface towards TG with VLAN tag rewrite translate-1-1 method; +| | ... | on DUT2 configure L2 cross-connect (L2XC) with one interface to TG +| | ... | and one VLAN sub-interface towards DUT1 with VLAN tag rewrite pop-1 +| | ... | method. [Ver] Make TG send ICMPv6 Echo Req tagegd with one Dot1q tag +| | ... | from one of its interfaces to another one via DUT1 and DUT2; verify +| | ... | that packet is received. [Ref] IEEE 802.1q +| | Given Path for 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in 3-node path are up +| | ${vlan1_name} | ${vlan1_index}= | When Vlan Subinterface Created +| | ... | ${dut1_node} | ${dut1_to_tg} | ${outer_vlan_id1} +| | ${vlan2_name} | ${vlan2_index}= | And Vlan Subinterface Created +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${outer_vlan_id2} +| | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node} +| | ... | ${vlan1_index} | translate-1-1 | tag1_id=${outer_vlan_id2} +| | And L2 Tag Rewrite Method Is Set On Interface | ${dut2_node} +| | ... | ${vlan2_index} | pop-1 +| | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index} +| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index} +| | Then Send and receive ICMP Packet +| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} | src_ip=${src_ip} +| | ... | dst_ip=${dst_ip} | encaps=Dot1q | vlan1=${outer_vlan_id1} + +| TC04: DUT1 and DUT2 with L2XC and VLAN translate-1-1 with wrong tag used (DUT1) switch ICMPv6 between two TG links +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv6-ICMPv6 on TG-DUT1 and \ +| | ... | DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. [Cfg] On DUT1 configure L2 +| | ... | cross-connect (L2XC) with one interface to DUT2 and one VLAN +| | ... | sub-interface towards TG with VLAN tag rewrite translate-1-1 method +| | ... | to set tag different from tag set on VLAN sub-interface of DUT2; +| | ... | on DUT2 configure L2 cross-connect (L2XC) with one interface to TG +| | ... | and one VLAN sub-interface towards DUT1 with VLAN tag rewrite pop-1 +| | ... | method. [Ver] Make TG send ICMPv6 Echo Req tagegd with one Dot1q tag +| | ... | from one of its interfaces to another one via DUT1 and DUT2; verify +| | ... | that packet is not received. [Ref] IEEE 802.1q +| | [Tags] | SKIP_PATCH +| | Given Path for 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in 3-node path are up +| | ${vlan1_name} | ${vlan1_index}= | When Vlan Subinterface Created +| | ... | ${dut1_node} | ${dut1_to_tg} | ${outer_vlan_id1} +| | ${vlan2_name} | ${vlan2_index}= | And Vlan Subinterface Created +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${outer_vlan_id2} +| | And L2 Tag Rewrite Method Is Set On Interface | ${dut1_node} +| | ... | ${vlan1_index} | translate-1-1 | tag1_id=${outer_vlan_wrong} +| | And L2 Tag Rewrite Method Is Set On Interface | ${dut2_node} +| | ... | ${vlan2_index} | pop-1 +| | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index} +| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index} +| | Then Run Keyword And Expect Error | ICMP echo Rx timeout +| | ... | Send and receive ICMP Packet | ${tg_node} | ${tg_to_dut1} +| | ... | ${tg_to_dut2} | src_ip=${src_ip} | dst_ip=${dst_ip} | encaps=Dot1q +| | ... | vlan1=${outer_vlan_id1} diff --git a/tests/func/vrf/vrf_tests.robot b/tests/func/vrf/eth2p-ethip4-ip4basevrf-func.robot index 0339573956..7a76a1805c 100644 --- a/tests/func/vrf/vrf_tests.robot +++ b/tests/func/vrf/eth2p-ethip4-ip4basevrf-func.robot @@ -29,7 +29,7 @@ | ... | links in between nodes. | ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for L2 switching of | ... | IPv4. -| ... | *[Cfg] DUT configuration:*Each DUT is configured with two VRF tables; +| ... | *[Cfg] DUT configuration:* Each DUT is configured with two VRF tables; | ... | Separation of traffic is tested by IP packets; Basic ARP and ROUTES are | ... | set on DUT nodes; IP addresses are set on DUT interfaces. | ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets diff --git a/tests/func/vrf/vrf_tests_v6.robot b/tests/func/vrf/eth2p-ethip6-ip6basevrf-func.robot index b88b6fd577..b88b6fd577 100644 --- a/tests/func/vrf/vrf_tests_v6.robot +++ b/tests/func/vrf/eth2p-ethip6-ip6basevrf-func.robot diff --git a/tests/func/vxlan/vxlan_bd_dot1q.robot b/tests/func/vxlan/eth2p-dot1qip4vxlan-l2bdbasemaclrn-func.robot index 592154845d..592154845d 100644 --- a/tests/func/vxlan/vxlan_bd_dot1q.robot +++ b/tests/func/vxlan/eth2p-dot1qip4vxlan-l2bdbasemaclrn-func.robot diff --git a/tests/func/vxlan/eth2p-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-func.robot b/tests/func/vxlan/eth2p-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-func.robot new file mode 100644 index 0000000000..357f339a7c --- /dev/null +++ b/tests/func/vxlan/eth2p-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-func.robot @@ -0,0 +1,119 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/default.robot +| Resource | resources/libraries/robot/testing_path.robot +| Resource | resources/libraries/robot/vxlan.robot +| Resource | resources/libraries/robot/l2_traffic.robot +| Resource | resources/libraries/robot/qemu.robot +| Resource | resources/libraries/robot/double_qemu_setup.robot +| Library | resources.libraries.python.Trace +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | HW_ENV | VPP_VM_ENV +| Test Setup | Func Test Setup +| Test Teardown | Func Test Teardown +| Documentation | *L2BD with VM combined with VXLAN test cases - IPv4* +| ... +| ... | *[Top] Network topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet encapsulations:* Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 on +| ... | DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUTn for L2 switching of IPv4. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 +| ... | bridge-domain (L2BD) switching combined with MAC learning enabled; +| ... | VXLAN tunnels are configured between L2BDs on DUT1 and DUT2. +| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are sent +| ... | in both directions by TG on links to DUT1 and DUT2; on receive TG +| ... | verifies packets for correctness and their IPv4 src-addr, dst-addr +| ... | and MAC addresses. +| ... | *[Ref] Applicable standard specifications:* RFC7348. + +*** Variables *** +| ${vni_1}= | 23 + +| ${bd_id1}= | 10 +| ${bd_id2}= | 20 + +| ${ip4_addr1}= | 172.16.0.1 +| ${ip4_addr2}= | 172.16.0.2 +| ${ip4_prefix}= | 24 + +| ${sock1}= | /tmp/sock1 +| ${sock2}= | /tmp/sock2 + +| ${qemu1}= | qemu_instance_1 +| ${qemu2}= | qemu_instance_2 + +| ${dut1_vhost1}= | dut1_vhost_if1 +| ${dut1_vhost2}= | dut1_vhost_if2 +| ${dut2_vhost1}= | dut2_vhost_if1 +| ${dut2_vhost2}= | dut2_vhost_if2 + +*** Test Cases *** +| TC01:DUT1 and DUT2 with two L2BDs and VXLANoIPv4 tunnel switch ICMPv4 between TG links and VM links +| | [Documentation] +| | ... | [Top] TG-DUT1-VM-DUT1-DUT2-VM-DUT2-TG. +| | ... | [Enc] Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 on DUT1-DUT2; Eth-IPv4-ICMPv4 +| | ... | on TG-DUTn and DUTn=VM. +| | ... | [Cfg] On both DUTs configure two L2BDs (MAC learning enabled); first +| | ... | L2BD with untagged interface to TG and vhost-user interface to local +| | ... | VM, second one with vhost-user interface to local VM and VXLAN +| | ... | interface towards the other DUT. Configure linux bridge on both VMs +| | ... | to pass traffic between both vhost-user interfaces. +| | ... | [Ver] Make TG send ICMPv4 Echo Req between two of its interfaces to +| | ... | be switched by DUT1 and DUT2; verify packets are switched between +| | ... | these TG interfaces. +| | ... | [Ref] RFC7348. +| | Given Path for 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in 3-node path are up +| | When VPP Vhost interfaces for L2BD forwarding are setup | ${dut1_node} +| | ... | ${sock1} +| | ... | ${sock2} +| | ... | ${dut1_vhost1} +| | ... | ${dut1_vhost2} +| | And VPP Vhost interfaces for L2BD forwarding are setup | ${dut2_node} +| | ... | ${sock1} +| | ... | ${sock2} +| | ... | ${dut2_vhost1} +| | ... | ${dut2_vhost2} +| | And VM for Vhost L2BD forwarding is setup | ${dut1_node} | ${sock1} +| | ... | ${sock2} | ${qemu1} +| | And VM for Vhost L2BD forwarding is setup | ${dut2_node} | ${sock1} +| | ... | ${sock2} | ${qemu2} +| | And Set Interface Address | ${dut1_node} | ${dut1_to_dut2} | ${ip4_addr1} +| | ... | ${ip4_prefix} +| | And Set Interface Address | ${dut2_node} | ${dut2_to_dut1} | ${ip4_addr2} +| | ... | ${ip4_prefix} +| | And VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${ip4_addr2} +| | And VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${ip4_addr1} +| | ${dut1s_vxlan}= | And Create VXLAN interface | ${dut1_node} | ${vni_1} +| | | ... | ${ip4_addr1} | ${ip4_addr2} +| | ${dut2s_vxlan}= | And Create VXLAN interface | ${dut2_node} | ${vni_1} +| | | ... | ${ip4_addr2} | ${ip4_addr1} +| | And Interfaces are added to BD | ${dut1_node} | ${bd_id1} +| | ... | ${dut1_to_tg} | ${${dut1_vhost1}} +| | And Interfaces are added to BD | ${dut1_node} | ${bd_id2} +| | ... | ${dut1s_vxlan} | ${${dut1_vhost2}} +| | And Interfaces are added to BD | ${dut2_node} | ${bd_id1} +| | ... | ${dut2_to_tg} | ${${dut2_vhost1}} +| | And Interfaces are added to BD | ${dut2_node} | ${bd_id2} +| | ... | ${dut2s_vxlan} | ${${dut2_vhost2}} +| | Then Send and receive ICMPv4 bidirectionally +| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} +| | [Teardown] | Run Keywords | Show Packet Trace on All DUTs | ${nodes} +| | ... | AND | Show vpp trace dump on all DUTs +| | ... | AND | Run keyword | Qemu Teardown | ${dut1_node} +| | ... | ${${qemu1}} | ${qemu1} +| | ... | AND | Run keyword | Qemu Teardown | ${dut2_node} +| | ... | ${${qemu2}} | ${qemu2} +| | ... | AND | Check VPP PID in Teardown diff --git a/tests/func/vxlan/eth2p-ethip4vxlan-l2bdbasemaclrn-func.robot b/tests/func/vxlan/eth2p-ethip4vxlan-l2bdbasemaclrn-func.robot new file mode 100644 index 0000000000..543fec22b8 --- /dev/null +++ b/tests/func/vxlan/eth2p-ethip4vxlan-l2bdbasemaclrn-func.robot @@ -0,0 +1,78 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/default.robot +| Resource | resources/libraries/robot/testing_path.robot +| Resource | resources/libraries/robot/vxlan.robot +| Resource | resources/libraries/robot/l2_traffic.robot +| Resource | resources/libraries/robot/qemu.robot +| Resource | resources/libraries/robot/double_qemu_setup.robot +| Library | resources.libraries.python.Trace +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | HW_ENV +| Test Setup | Func Test Setup +| Test Teardown | Func Test Teardown +| Documentation | *Bridge-domain with VXLAN test cases - IPv4* +| ... +| ... | *[Top] Network topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet encapsulations:* Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 on +| ... | DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUTn for L2 switching of IPv4. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 +| ... | bridge-domain (L2BD) switching combined with MAC learning enabled; +| ... | VXLAN tunnels are configured between L2BDs on DUT1 and DUT2. +| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are sent +| ... | in both directions by TG on links to DUT1 and DUT2; on receive TG +| ... | verifies packets for correctness and their IPv4 src-addr, dst-addr +| ... | and MAC addresses. +| ... | *[Ref] Applicable standard specifications:* RFC7348. + +*** Variables *** +| ${vni_1}= | 23 +| ${vni_2}= | 35 + +| ${bd_id1}= | 10 +| ${bd_id2}= | 20 +| ${bd_id3}= | 30 +| ${shg1}= | 1 +| ${shg2}= | 2 + +| ${ip4_addr1}= | 172.16.0.1 +| ${ip4_addr2}= | 172.16.0.2 +| ${ip4_prefix}= | 24 + +*** Test Cases *** +| TC01: DUT1 and DUT2 with L2BD and VXLANoIPv4 tunnels switch ICMPv4 between TG links +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 on \ +| | ... | DUT1-DUT2; Eth-IPv4-ICMPv4 on TG-DUTn. [Cfg] On DUT1 and DUT2 +| | ... | configure two i/fs into L2BD with MAC learning. [Ver] Make TG +| | ... | verify ICMPv4 Echo Req pkts are switched thru DUT1 and DUT2 in +| | ... | both directions and are correct on receive. [Ref] RFC7348. +| | Given Path for 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in 3-node path are up +| | ${dut1_to_dut2_name}= | Get interface name | ${dut1_node} | ${dut1_to_dut2} +| | ${dut2_to_dut1_name}= | Get interface name | ${dut2_node} | ${dut2_to_dut1} +| | And IP addresses are set on interfaces | ${dut1_node} | ${dut1_to_dut2_name} | ${NONE} +| | ... | ${dut2_node} | ${dut2_to_dut1_name} | ${NONE} +| | ${dut1s_vxlan}= | When Create VXLAN interface | ${dut1_node} | ${vni_1} +| | | ... | ${dut1s_ip_address} | ${dut2s_ip_address} +| | And Interfaces are added to BD | ${dut1_node} | ${bd_id1} +| | ... | ${dut1_to_tg} | ${dut1s_vxlan} +| | ${dut2s_vxlan}= | And Create VXLAN interface | ${dut2_node} | ${vni_1} +| | | ... | ${dut2s_ip_address} | ${dut1s_ip_address} +| | And Interfaces are added to BD | ${dut2_node} | ${bd_id1} +| | ... | ${dut2_to_tg} | ${dut2s_vxlan} +| | Then Send and receive ICMPv4 bidirectionally +| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} diff --git a/tests/func/vxlan/vxlan_xconnect_untagged.robot b/tests/func/vxlan/eth2p-ethip4vxlan-l2xcbase-func.robot index de38c56b2d..de38c56b2d 100644 --- a/tests/func/vxlan/vxlan_xconnect_untagged.robot +++ b/tests/func/vxlan/eth2p-ethip4vxlan-l2xcbase-func.robot diff --git a/tests/func/vxlan/eth2p-ethip6vxlan-l2bdbasemaclrn-eth-2vhost-1vm-func.robot b/tests/func/vxlan/eth2p-ethip6vxlan-l2bdbasemaclrn-eth-2vhost-1vm-func.robot new file mode 100644 index 0000000000..19846294a3 --- /dev/null +++ b/tests/func/vxlan/eth2p-ethip6vxlan-l2bdbasemaclrn-eth-2vhost-1vm-func.robot @@ -0,0 +1,120 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/default.robot +| Resource | resources/libraries/robot/testing_path.robot +| Resource | resources/libraries/robot/vxlan.robot +| Resource | resources/libraries/robot/l2_traffic.robot +| Resource | resources/libraries/robot/qemu.robot +| Resource | resources/libraries/robot/double_qemu_setup.robot +| Library | resources.libraries.python.Trace +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | HW_ENV +| Test Setup | Func Test Setup +| Test Teardown | Func Test Teardown +| Documentation | *L2BD with VM combined with VXLAN test cases - IPv6* +| ... +| ... | *[Top] Network topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet encapsulations:* Eth-IPv6-VXLAN-Eth-IPv6-ICMPv6 on +| ... | DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUTn for L2 switching of IPv6. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 +| ... | bridge-domain (L2BD) switching combined with MAC learning enabled; +| ... | VXLAN tunnels are configured between L2BDs on DUT1 and DUT2. +| ... | *[Ver] TG verification:* Test ICMPv6 Echo Request packets are sent +| ... | in both directions by TG on links to DUT1 and DUT2; on receive TG +| ... | verifies packets for correctness and their IPv6 src-addr, dst-addr +| ... | and MAC addresses. +| ... | *[Ref] Applicable standard specifications:* RFC7348. + +*** Variables *** +| ${vni_1}= | 23 + +| ${bd_id1}= | 10 +| ${bd_id2}= | 20 + +| ${ip6_addr1}= | 3ffe:64::1 +| ${ip6_addr2}= | 3ffe:64::2 +| ${ip6_prefix}= | 64 + +| ${sock1}= | /tmp/sock1 +| ${sock2}= | /tmp/sock2 + +| ${qemu1}= | qemu_instance_1 +| ${qemu2}= | qemu_instance_2 + +| ${dut1_vhost1}= | dut1_vhost_if1 +| ${dut1_vhost2}= | dut1_vhost_if2 +| ${dut2_vhost1}= | dut2_vhost_if1 +| ${dut2_vhost2}= | dut2_vhost_if2 + +*** Test Cases *** +| TC01:DUT1 and DUT2 with two L2BDs and VXLANoIPv6 tunnel switch ICMPv6 between TG links and VM links +| | [Documentation] +| | ... | [Top] TG-DUT1-VM-DUT1-DUT2-VM-DUT2-TG. +| | ... | [Enc] Eth-IPv6-VXLAN-Eth-IPv6-ICMPv6 on DUT1-DUT2; Eth-IPv4-ICMPv4 +| | ... | on TG-DUTn and DUTn=VM. +| | ... | [Cfg] On both DUTs configure two L2BDs (MAC learning enabled); first +| | ... | L2BD with untagged interface to TG and vhost-user interface to local +| | ... | VM, second one with vhost-user interface to local VM and VXLAN +| | ... | interface towards the other DUT. Configure linux bridge on both VMs +| | ... | to pass traffic between both vhost-user interfaces. +| | ... | [Ver] Make TG send ICMPv6 Echo Req between two of its interfaces to +| | ... | be switched by DUT1 and DUT2; verify packets are switched between +| | ... | these TG interfaces. +| | ... | [Ref] RFC7348. +| | [Tags] | VPP_VM_ENV +| | Given Path for 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in 3-node path are up +| | When VPP Vhost interfaces for L2BD forwarding are setup | ${dut1_node} +| | ... | ${sock1} +| | ... | ${sock2} +| | ... | ${dut1_vhost1} +| | ... | ${dut1_vhost2} +| | And VPP Vhost interfaces for L2BD forwarding are setup | ${dut2_node} +| | ... | ${sock1} +| | ... | ${sock2} +| | ... | ${dut2_vhost1} +| | ... | ${dut2_vhost2} +| | And VM for Vhost L2BD forwarding is setup | ${dut1_node} | ${sock1} +| | ... | ${sock2} | ${qemu1} +| | And VM for Vhost L2BD forwarding is setup | ${dut2_node} | ${sock1} +| | ... | ${sock2} | ${qemu2} +| | And Set Interface Address | ${dut1_node} | ${dut1_to_dut2} | ${ip6_addr1} +| | ... | ${ip6_prefix} +| | And Set Interface Address | ${dut2_node} | ${dut2_to_dut1} | ${ip6_addr2} +| | ... | ${ip6_prefix} +| | And VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${ip6_addr2} +| | And VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${ip6_addr1} +| | ${dut1s_vxlan}= | And Create VXLAN interface | ${dut1_node} | ${vni_1} +| | | ... | ${ip6_addr1} | ${ip6_addr2} +| | ${dut2s_vxlan}= | And Create VXLAN interface | ${dut2_node} | ${vni_1} +| | | ... | ${ip6_addr2} | ${ip6_addr1} +| | And Interfaces are added to BD | ${dut1_node} | ${bd_id1} +| | ... | ${dut1_to_tg} | ${${dut1_vhost1}} +| | And Interfaces are added to BD | ${dut1_node} | ${bd_id2} +| | ... | ${dut1s_vxlan} | ${${dut1_vhost2}} +| | And Interfaces are added to BD | ${dut2_node} | ${bd_id1} +| | ... | ${dut2_to_tg} | ${${dut2_vhost1}} +| | And Interfaces are added to BD | ${dut2_node} | ${bd_id2} +| | ... | ${dut2s_vxlan} | ${${dut2_vhost2}} +| | Then Send and receive ICMPv6 bidirectionally +| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} +| | [Teardown] | Run Keywords | Show Packet Trace on All DUTs | ${nodes} +| | ... | AND | Show vpp trace dump on all DUTs +| | ... | AND | Run keyword | Qemu Teardown | ${dut1_node} +| | ... | ${${qemu1}} | ${qemu1} +| | ... | AND | Run keyword | Qemu Teardown | ${dut2_node} +| | ... | ${${qemu2}} | ${qemu2} +| | ... | AND | Check VPP PID in Teardown diff --git a/tests/func/vxlan/eth2p-ethip6vxlan-l2bdbasemaclrn-func.robot b/tests/func/vxlan/eth2p-ethip6vxlan-l2bdbasemaclrn-func.robot new file mode 100644 index 0000000000..23b88d45f2 --- /dev/null +++ b/tests/func/vxlan/eth2p-ethip6vxlan-l2bdbasemaclrn-func.robot @@ -0,0 +1,78 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/default.robot +| Resource | resources/libraries/robot/testing_path.robot +| Resource | resources/libraries/robot/vxlan.robot +| Resource | resources/libraries/robot/l2_traffic.robot +| Resource | resources/libraries/robot/qemu.robot +| Resource | resources/libraries/robot/double_qemu_setup.robot +| Library | resources.libraries.python.Trace +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | HW_ENV +| Test Setup | Func Test Setup +| Test Teardown | Func Test Teardown +| Documentation | *Bridge-domain with VXLAN test cases - IPv6* +| ... +| ... | *[Top] Network topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet encapsulations:* Eth-IPv6-VXLAN-Eth-IPv6-ICMPv6 on +| ... | DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUTn for L2 switching of IPv6. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 +| ... | bridge-domain (L2BD) switching combined with MAC learning enabled; +| ... | VXLAN tunnels are configured between L2BDs on DUT1 and DUT2. +| ... | *[Ver] TG verification:* Test ICMPv6 Echo Request packets are sent +| ... | in both directions by TG on links to DUT1 and DUT2; on receive TG +| ... | verifies packets for correctness and their IPv6 src-addr, dst-addr +| ... | and MAC addresses. +| ... | *[Ref] Applicable standard specifications:* RFC7348. + +*** Variables *** +| ${vni_1}= | 23 + +| ${bd_id1}= | 10 + +| ${ip6_addr1}= | 3ffe:64::1 +| ${ip6_addr2}= | 3ffe:64::2 +| ${ip6_prefix}= | 64 + +*** Test Cases *** +| TC01: DUT1 and DUT2 with L2BD and VXLANoIPv6 tunnels switch ICMPv6 between TG links +| | [Documentation] +| | ... | [Top] TG=DUT1=DUT2=TG.[Enc] Eth-IPv6-VXLAN-Eth-IPv6-ICMPv6 on \ +| | ... | DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUTn. [Cfg] On DUT1 and DUT2 +| | ... | configure L2 bridge-domain (MAC learning enabled), each with one +| | ... | interface to TG and one VXLAN tunnel interface towards the other +| | ... | DUT. [Ver] Make TG send ICMPv6 Echo Req between two of its +| | ... | interfaces to be switched by DUT1 and DUT2; verify all packets +| | ... | are received. [Ref] RFC7348. +| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO +| | Given Path for 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in 3-node path are up +| | And Set Interface Address | ${dut1_node} | ${dut1_to_dut2} | ${ip6_addr1} +| | ... | ${ip6_prefix} +| | And Set Interface Address | ${dut2_node} | ${dut2_to_dut1} | ${ip6_addr2} +| | ... | ${ip6_prefix} +| | And VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${ip6_addr2} +| | And VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${ip6_addr1} +| | ${dut1s_vxlan}= | When Create VXLAN interface | ${dut1_node} | ${vni_1} +| | | ... | ${ip6_addr1} | ${ip6_addr2} +| | And Interfaces are added to BD | ${dut1_node} | ${bd_id1} +| | ... | ${dut1_to_tg} | ${dut1s_vxlan} +| | ${dut2s_vxlan}= | And Create VXLAN interface | ${dut2_node} | ${vni_1} +| | | ... | ${ip6_addr2} | ${ip6_addr1} +| | And Interfaces are added to BD | ${dut2_node} | ${bd_id1} +| | ... | ${dut2_to_tg} | ${dut2s_vxlan} +| | Then Send and receive ICMPv6 bidirectionally +| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} diff --git a/tests/func/vxlan/eth4p-ethip4vxlan-l2bdbasemaclrn-l2shg-func.robot b/tests/func/vxlan/eth4p-ethip4vxlan-l2bdbasemaclrn-l2shg-func.robot new file mode 100644 index 0000000000..8afb22a717 --- /dev/null +++ b/tests/func/vxlan/eth4p-ethip4vxlan-l2bdbasemaclrn-l2shg-func.robot @@ -0,0 +1,200 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/default.robot +| Resource | resources/libraries/robot/testing_path.robot +| Resource | resources/libraries/robot/vxlan.robot +| Resource | resources/libraries/robot/l2_traffic.robot +| Resource | resources/libraries/robot/qemu.robot +| Resource | resources/libraries/robot/double_qemu_setup.robot +| Library | resources.libraries.python.Trace +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | HW_ENV +| Test Setup | Func Test Setup +| Test Teardown | Func Test Teardown +| Documentation | *L2BD with SHG combined with VXLAN test cases - IPv4* +| ... +| ... | *[Top] Network topologies:* TG=DUT1=DUT2=TG 3-node circular topology +| ... | with double parallel links. +| ... | *[Enc] Packet encapsulations:* Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 on +| ... | DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUTn for L2 switching of IPv4. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 +| ... | bridge-domain (L2BD) switching combined with MAC learning enabled +| ... | and Split Horizon Groups (SHG); VXLAN tunnels are configured +| ... | between L2BDs on DUT1 and DUT2. +| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are sent +| ... | in both directions by TG on links to DUT1 and DUT2; on receive TG +| ... | verifies packets for correctness and their IPv4 src-addr, dst-addr +| ... | and MAC addresses. +| ... | *[Ref] Applicable standard specifications:* RFC7348. + +*** Variables *** +| ${vni_1}= | 23 +| ${vni_2}= | 35 + +| ${bd_id1}= | 10 +| ${bd_id2}= | 20 +| ${bd_id3}= | 30 +| ${shg1}= | 1 +| ${shg2}= | 2 + +| ${ip4_addr1}= | 172.16.0.1 +| ${ip4_addr2}= | 172.16.0.2 +| ${ip4_prefix}= | 24 + +*** Test Cases *** +| TC01: DUT1 and DUT2 with L2BD and VXLANoIPv4 tunnels in SHG switch ICMPv4 between TG links +| | [Documentation] +| | ... | [Top] TG=DUT1=DUT2=TG. [Enc] Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 on \ +| | ... | DUT1-DUT2; Eth-IPv4-ICMPv4 on TG-DUTn. [Cfg] On DUT1 configure L2 +| | ... | bridge-domain (MAC learning enabled) with two untagged interfaces +| | ... | to TG and two VXLAN interfaces towards the DUT2 and put both VXLAN +| | ... | interfaces into the same Split-Horizon-Group (SHG). On DUT2 configure +| | ... | two L2 bridge-domain (MAC learning enabled), each with one untagged +| | ... | interface to TG and one VXLAN interface towards the DUT1. [Ver] Make +| | ... | TG send ICMPv4 Echo Reqs between all four of its interfaces to be +| | ... | switched by DUT1 and DUT2; verify packets are not switched between +| | ... | TG interfaces connected to DUT2 that are isolated by SHG on DUT1. +| | ... | [Ref] RFC7348. +| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO +| | Given Path for 3-node BD-SHG testing is set | ${nodes['TG']} +| | ... | ${nodes['DUT1']} +| | ... | ${nodes['DUT2']} +| | And Interfaces in 3-node BD-SHG testing are up +| | And Set Interface Address | ${dut1_node} | ${dut1_to_dut2} | ${ip4_addr1} +| | ... | ${ip4_prefix} +| | And Set Interface Address | ${dut2_node} | ${dut2_to_dut1} | ${ip4_addr2} +| | ... | ${ip4_prefix} +| | And VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${ip4_addr2} +| | And VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${ip4_addr1} +| | ${dut1s_vxlan1}= | When Create VXLAN interface | ${dut1_node} | ${vni_1} +| | | ... | ${ip4_addr1} | ${ip4_addr2} +| | ${dut1s_vxlan2}= | And Create VXLAN interface | ${dut1_node} | ${vni_2} +| | | ... | ${ip4_addr1} | ${ip4_addr2} +| | ${dut2s_vxlan1}= | And Create VXLAN interface | ${dut2_node} | ${vni_1} +| | | ... | ${ip4_addr2} | ${ip4_addr1} +| | ${dut2s_vxlan2}= | And Create VXLAN interface | ${dut2_node} | ${vni_2} +| | | ... | ${ip4_addr2} | ${ip4_addr1} +| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan1} | up +| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan2} | up +| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan1} | up +| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan2} | up +| | And Vpp Node Interfaces Ready Wait | ${dut1_node} +| | And Vpp Node Interfaces Ready Wait | ${dut2_node} +| | And Bridge domain on DUT node is created | ${dut1_node} | ${bd_id1} +| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_tg_if1} +| | ... | ${bd_id1} +| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_tg_if2} +| | ... | ${bd_id1} +| | And Interface is added to bridge domain | ${dut1_node} | ${dut1s_vxlan1} +| | ... | ${bd_id1} | ${shg1} +| | And Interface is added to bridge domain | ${dut1_node} | ${dut1s_vxlan2} +| | ... | ${bd_id1} | ${shg1} +| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id2} +| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg_if1} +| | ... | ${bd_id2} +| | And Interface is added to bridge domain | ${dut2_node} | ${dut2s_vxlan1} +| | ... | ${bd_id2} +| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id3} +| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg_if2} +| | ... | ${bd_id3} +| | And Interface is added to bridge domain | ${dut2_node} | ${dut2s_vxlan2} +| | ... | ${bd_id3} +| | Then Send and receive ICMPv4 bidirectionally | ${tg_node} +| | ... | ${tg_to_dut1_if1} +| | ... | ${tg_to_dut2_if1} +| | And Send and receive ICMPv4 bidirectionally | ${tg_node} +| | ... | ${tg_to_dut1_if1} +| | ... | ${tg_to_dut2_if2} +| | And Send and receive ICMPv4 bidirectionally | ${tg_node} +| | ... | ${tg_to_dut1_if2} +| | ... | ${tg_to_dut2_if1} +| | And Send and receive ICMPv4 bidirectionally | ${tg_node} +| | ... | ${tg_to_dut1_if2} +| | ... | ${tg_to_dut2_if2} +| | And Run Keyword And Expect Error | ICMP echo Rx timeout +| | ... | Send and receive ICMPv4 bidirectionally +| | | ... | ${tg_node} | ${tg_to_dut2_if1} +| | | ... | ${tg_to_dut2_if2} + +| TC01: DUT1 and DUT2 with L2BD and VXLANoIPv4 tunnels in different SHGs switch ICMPv4 between TG links +| | [Documentation] +| | ... | [Top] TG=DUT1=DUT2=TG.[Enc] Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 on \ +| | ... | DUT1-DUT2; Eth-IPv4-ICMPv4 on TG-DUTn. [Cfg] On DUT1 configure L2 +| | ... | bridge-domain (MAC learning enabled) with two untagged interfaces +| | ... | to TG and two VXLAN interfaces towards the DUT2 and put both VXLAN +| | ... | interfaces into the different Split-Horizon-Group (SHGs). On DUT2 +| | ... | configure two L2 bridge-domain (MAC learning enabled), each with one +| | ... | untagged interface to TG and one VXLAN interface towards the DUT1. +| | ... | [Ver] Make TG send ICMPv4 Echo Req between all four of its interfaces +| | ... | to be switched by DUT1 and DUT2; verify packets are switched between +| | ... | all TG interfaces. [Ref] RFC7348. +| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO +| | Given Path for 3-node BD-SHG testing is set | ${nodes['TG']} +| | ... | ${nodes['DUT1']} +| | ... | ${nodes['DUT2']} +| | And Interfaces in 3-node BD-SHG testing are up +| | And Set Interface Address | ${dut1_node} | ${dut1_to_dut2} | ${ip4_addr1} +| | ... | ${ip4_prefix} +| | And Set Interface Address | ${dut2_node} | ${dut2_to_dut1} | ${ip4_addr2} +| | ... | ${ip4_prefix} +| | And VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${ip4_addr2} +| | And VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${ip4_addr1} +| | ${dut1s_vxlan1}= | When Create VXLAN interface | ${dut1_node} | ${vni_1} +| | | ... | ${ip4_addr1} | ${ip4_addr2} +| | ${dut1s_vxlan2}= | And Create VXLAN interface | ${dut1_node} | ${vni_2} +| | | ... | ${ip4_addr1} | ${ip4_addr2} +| | ${dut2s_vxlan1}= | And Create VXLAN interface | ${dut2_node} | ${vni_1} +| | | ... | ${ip4_addr2} | ${ip4_addr1} +| | ${dut2s_vxlan2}= | And Create VXLAN interface | ${dut2_node} | ${vni_2} +| | | ... | ${ip4_addr2} | ${ip4_addr1} +| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan1} | up +| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan2} | up +| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan1} | up +| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan2} | up +| | And Vpp Node Interfaces Ready Wait | ${dut1_node} +| | And Vpp Node Interfaces Ready Wait | ${dut2_node} +| | And Bridge domain on DUT node is created | ${dut1_node} | ${bd_id1} +| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_tg_if1} +| | ... | ${bd_id1} +| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_tg_if2} +| | ... | ${bd_id1} +| | And Interface is added to bridge domain | ${dut1_node} | ${dut1s_vxlan1} +| | ... | ${bd_id1} | ${shg1} +| | And Interface is added to bridge domain | ${dut1_node} | ${dut1s_vxlan2} +| | ... | ${bd_id1} | ${shg2} +| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id2} +| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg_if1} +| | ... | ${bd_id2} +| | And Interface is added to bridge domain | ${dut2_node} | ${dut2s_vxlan1} +| | ... | ${bd_id2} +| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id3} +| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg_if2} +| | ... | ${bd_id3} +| | And Interface is added to bridge domain | ${dut2_node} | ${dut2s_vxlan2} +| | ... | ${bd_id3} +| | Then Send and receive ICMPv4 bidirectionally | ${tg_node} +| | ... | ${tg_to_dut1_if1} +| | ... | ${tg_to_dut2_if1} +| | And Send and receive ICMPv4 bidirectionally | ${tg_node} +| | ... | ${tg_to_dut1_if1} +| | ... | ${tg_to_dut2_if2} +| | And Send and receive ICMPv4 bidirectionally | ${tg_node} +| | ... | ${tg_to_dut1_if2} +| | ... | ${tg_to_dut2_if1} +| | And Send and receive ICMPv4 bidirectionally | ${tg_node} +| | ... | ${tg_to_dut1_if2} +| | ... | ${tg_to_dut2_if2} +| | And Send and receive ICMPv4 bidirectionally | ${tg_node} +| | ... | ${tg_to_dut2_if1} +| | ... | ${tg_to_dut2_if2} diff --git a/tests/func/vxlan/eth4p-ethip6vxlan-l2bdbasemaclrn-l2shg-func.robot b/tests/func/vxlan/eth4p-ethip6vxlan-l2bdbasemaclrn-l2shg-func.robot new file mode 100644 index 0000000000..2ed07462cf --- /dev/null +++ b/tests/func/vxlan/eth4p-ethip6vxlan-l2bdbasemaclrn-l2shg-func.robot @@ -0,0 +1,200 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/default.robot +| Resource | resources/libraries/robot/testing_path.robot +| Resource | resources/libraries/robot/vxlan.robot +| Resource | resources/libraries/robot/l2_traffic.robot +| Resource | resources/libraries/robot/qemu.robot +| Resource | resources/libraries/robot/double_qemu_setup.robot +| Library | resources.libraries.python.Trace +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | HW_ENV +| Test Setup | Func Test Setup +| Test Teardown | Func Test Teardown +| Documentation | *L2BD with SHG combined with VXLAN test cases - IPv6* +| ... +| ... | *[Top] Network topologies:* TG=DUT1=DUT2=TG 3-node circular topology +| ... | with double parallel links. +| ... | *[Enc] Packet encapsulations:* th-IPv6-VXLAN-Eth-IPv6-ICMPv6 on +| ... | DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUTn for L2 switching of IPv6. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 +| ... | bridge-domain (L2BD) switching combined with MAC learning enabled +| ... | and Split Horizon Groups (SHG); VXLAN tunnels are configured +| ... | between L2BDs on DUT1 and DUT2. +| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are sent +| ... | in both directions by TG on links to DUT1 and DUT2; on receive TG +| ... | verifies packets for correctness and their IPv6 src-addr, dst-addr +| ... | and MAC addresses. +| ... | *[Ref] Applicable standard specifications:* RFC7348. + +*** Variables *** +| ${vni_1}= | 23 +| ${vni_2}= | 35 + +| ${bd_id1}= | 10 +| ${bd_id2}= | 20 +| ${bd_id3}= | 30 +| ${shg1}= | 1 +| ${shg2}= | 2 + +| ${ip6_addr1}= | 3ffe:64::1 +| ${ip6_addr2}= | 3ffe:64::2 +| ${ip6_prefix}= | 64 + +*** Test Cases *** +| TC01: DUT1 and DUT2 with L2BD and VXLANoIPv6 tunnels in SHG switch ICMPv6 between TG links +| | [Documentation] +| | ... | [Top] TG=DUT1=DUT2=TG. [Enc] Eth-IPv6-VXLAN-Eth-IPv6-ICMPv6 on \ +| | ... | DUT1-DUT2; Eth-IPv6-ICMPv6 on TG-DUTn. [Cfg] On DUT1 configure L2 +| | ... | bridge-domain (MAC learning enabled) with two untagged interfaces +| | ... | to TG and two VXLAN interfaces towards the DUT2 and put both VXLAN +| | ... | interfaces into the same Split-Horizon-Group (SHG). On DUT2 configure +| | ... | two L2 bridge-domain (MAC learning enabled), each with one untagged +| | ... | interface to TG and one VXLAN interface towards the DUT1. [Ver] Make +| | ... | TG send ICMPv6 Echo Reqs between all four of its interfaces to be +| | ... | switched by DUT1 and DUT2; verify packets are not switched between +| | ... | TG interfaces connected to DUT2 that are isolated by SHG on DUT1. +| | ... | [Ref] RFC7348. +| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO +| | Given Path for 3-node BD-SHG testing is set | ${nodes['TG']} +| | ... | ${nodes['DUT1']} +| | ... | ${nodes['DUT2']} +| | And Interfaces in 3-node BD-SHG testing are up +| | And Set Interface Address | ${dut1_node} | ${dut1_to_dut2} | ${ip6_addr1} +| | ... | ${ip6_prefix} +| | And Set Interface Address | ${dut2_node} | ${dut2_to_dut1} | ${ip6_addr2} +| | ... | ${ip6_prefix} +| | And VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${ip6_addr2} +| | And VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${ip6_addr1} +| | ${dut1s_vxlan1}= | When Create VXLAN interface | ${dut1_node} | ${vni_1} +| | | ... | ${ip6_addr1} | ${ip6_addr2} +| | ${dut1s_vxlan2}= | And Create VXLAN interface | ${dut1_node} | ${vni_2} +| | | ... | ${ip6_addr1} | ${ip6_addr2} +| | ${dut2s_vxlan1}= | And Create VXLAN interface | ${dut2_node} | ${vni_1} +| | | ... | ${ip6_addr2} | ${ip6_addr1} +| | ${dut2s_vxlan2}= | And Create VXLAN interface | ${dut2_node} | ${vni_2} +| | | ... | ${ip6_addr2} | ${ip6_addr1} +| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan1} | up +| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan2} | up +| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan1} | up +| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan2} | up +| | And Vpp Node Interfaces Ready Wait | ${dut1_node} +| | And Vpp Node Interfaces Ready Wait | ${dut2_node} +| | And Bridge domain on DUT node is created | ${dut1_node} | ${bd_id1} +| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_tg_if1} +| | ... | ${bd_id1} +| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_tg_if2} +| | ... | ${bd_id1} +| | And Interface is added to bridge domain | ${dut1_node} | ${dut1s_vxlan1} +| | ... | ${bd_id1} | ${shg1} +| | And Interface is added to bridge domain | ${dut1_node} | ${dut1s_vxlan2} +| | ... | ${bd_id1} | ${shg1} +| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id2} +| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg_if1} +| | ... | ${bd_id2} +| | And Interface is added to bridge domain | ${dut2_node} | ${dut2s_vxlan1} +| | ... | ${bd_id2} +| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id3} +| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg_if2} +| | ... | ${bd_id3} +| | And Interface is added to bridge domain | ${dut2_node} | ${dut2s_vxlan2} +| | ... | ${bd_id3} +| | Then Send and receive ICMPv6 bidirectionally | ${tg_node} +| | ... | ${tg_to_dut1_if1} +| | ... | ${tg_to_dut2_if1} +| | And Send and receive ICMPv6 bidirectionally | ${tg_node} +| | ... | ${tg_to_dut1_if1} +| | ... | ${tg_to_dut2_if2} +| | And Send and receive ICMPv6 bidirectionally | ${tg_node} +| | ... | ${tg_to_dut1_if2} +| | ... | ${tg_to_dut2_if1} +| | And Send and receive ICMPv6 bidirectionally | ${tg_node} +| | ... | ${tg_to_dut1_if2} +| | ... | ${tg_to_dut2_if2} +| | And Run Keyword And Expect Error | ICMP echo Rx timeout +| | ... | Send and receive ICMPv6 bidirectionally +| | | ... | ${tg_node} | ${tg_to_dut2_if1} +| | | ... | ${tg_to_dut2_if2} + +| TC02: DUT1 and DUT2 with L2BD and VXLANoIPv6 tunnels in different SHGs switch ICMPv6 between TG links +| | [Documentation] +| | ... | [Top] TG=DUT1=DUT2=TG.[Enc] Eth-IPv6-VXLAN-Eth-IPv6-ICMPv6 on \ +| | ... | DUT1-DUT2; Eth-IPv6-ICMPv6 on TG-DUTn. [Cfg] On DUT1 configure L2 +| | ... | bridge-domain (MAC learning enabled) with two untagged interfaces +| | ... | to TG and two VXLAN interfaces towards the DUT2 and put both VXLAN +| | ... | interfaces into the different Split-Horizon-Group (SHGs). On DUT2 +| | ... | configure two L2 bridge-domain (MAC learning enabled), each with one +| | ... | untagged interface to TG and one VXLAN interface towards the DUT1. +| | ... | [Ver] Make TG send ICMPv6 Echo Req between all four of its interfaces +| | ... | to be switched by DUT1 and DUT2; verify packets are switched between +| | ... | all TG interfaces. [Ref] RFC7348. +| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO +| | Given Path for 3-node BD-SHG testing is set | ${nodes['TG']} +| | ... | ${nodes['DUT1']} +| | ... | ${nodes['DUT2']} +| | And Interfaces in 3-node BD-SHG testing are up +| | And Set Interface Address | ${dut1_node} | ${dut1_to_dut2} | ${ip6_addr1} +| | ... | ${ip6_prefix} +| | And Set Interface Address | ${dut2_node} | ${dut2_to_dut1} | ${ip6_addr2} +| | ... | ${ip6_prefix} +| | And VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${ip6_addr2} +| | And VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${ip6_addr1} +| | ${dut1s_vxlan1}= | When Create VXLAN interface | ${dut1_node} | ${vni_1} +| | | ... | ${ip6_addr1} | ${ip6_addr2} +| | ${dut1s_vxlan2}= | And Create VXLAN interface | ${dut1_node} | ${vni_2} +| | | ... | ${ip6_addr1} | ${ip6_addr2} +| | ${dut2s_vxlan1}= | And Create VXLAN interface | ${dut2_node} | ${vni_1} +| | | ... | ${ip6_addr2} | ${ip6_addr1} +| | ${dut2s_vxlan2}= | And Create VXLAN interface | ${dut2_node} | ${vni_2} +| | | ... | ${ip6_addr2} | ${ip6_addr1} +| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan1} | up +| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan2} | up +| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan1} | up +| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan2} | up +| | And Vpp Node Interfaces Ready Wait | ${dut1_node} +| | And Vpp Node Interfaces Ready Wait | ${dut2_node} +| | And Bridge domain on DUT node is created | ${dut1_node} | ${bd_id1} +| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_tg_if1} +| | ... | ${bd_id1} +| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_tg_if2} +| | ... | ${bd_id1} +| | And Interface is added to bridge domain | ${dut1_node} | ${dut1s_vxlan1} +| | ... | ${bd_id1} | ${shg1} +| | And Interface is added to bridge domain | ${dut1_node} | ${dut1s_vxlan2} +| | ... | ${bd_id1} | ${shg2} +| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id2} +| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg_if1} +| | ... | ${bd_id2} +| | And Interface is added to bridge domain | ${dut2_node} | ${dut2s_vxlan1} +| | ... | ${bd_id2} +| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id3} +| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg_if2} +| | ... | ${bd_id3} +| | And Interface is added to bridge domain | ${dut2_node} | ${dut2s_vxlan2} +| | ... | ${bd_id3} +| | Then Send and receive ICMPv6 bidirectionally | ${tg_node} +| | ... | ${tg_to_dut1_if1} +| | ... | ${tg_to_dut2_if1} +| | And Send and receive ICMPv6 bidirectionally | ${tg_node} +| | ... | ${tg_to_dut1_if1} +| | ... | ${tg_to_dut2_if2} +| | And Send and receive ICMPv6 bidirectionally | ${tg_node} +| | ... | ${tg_to_dut1_if2} +| | ... | ${tg_to_dut2_if1} +| | And Send and receive ICMPv6 bidirectionally | ${tg_node} +| | ... | ${tg_to_dut1_if2} +| | ... | ${tg_to_dut2_if2} +| | And Send and receive ICMPv6 bidirectionally | ${tg_node} +| | ... | ${tg_to_dut2_if1} +| | ... | ${tg_to_dut2_if2} diff --git a/tests/func/vxlan/vxlan_bd_untagged.robot b/tests/func/vxlan/vxlan_bd_untagged.robot deleted file mode 100644 index b708b6691a..0000000000 --- a/tests/func/vxlan/vxlan_bd_untagged.robot +++ /dev/null @@ -1,539 +0,0 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/default.robot -| Resource | resources/libraries/robot/testing_path.robot -| Resource | resources/libraries/robot/vxlan.robot -| Resource | resources/libraries/robot/l2_traffic.robot -| Resource | resources/libraries/robot/qemu.robot -| Resource | resources/libraries/robot/double_qemu_setup.robot -| Library | resources.libraries.python.Trace -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | HW_ENV -| Test Setup | Func Test Setup -| Test Teardown | Func Test Teardown -| Documentation | *RFC7348 VXLAN: Bridge-domain with VXLAN test cases* -| ... -| ... | *[Top] Network topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes; TG=DUT1=DUT2=TG 3-node circular -| ... | topology with double parallel links. -| ... | *[Enc] Packet encapsulations:* Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 on -| ... | DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUTn for L2 switching of IPv4; -| ... | Eth-IPv6-VXLAN-Eth-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on -| ... | TG-DUTn for L2 switching of IPv6. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 -| ... | bridge-domain (L2BD) switching combined with static MACs, MAC learning -| ... | enabled and Split Horizon Groups (SHG) depending on test case; VXLAN -| ... | tunnels are configured between L2BDs on DUT1 and DUT2. -| ... | *[Ver] TG verification:* Test ICMPv4 (or ICMPv6) Echo Request packets -| ... | are sent in both directions by TG on links to DUT1 and DUT2; on receive -| ... | TG verifies packets for correctness and their IPv4 (IPv6) src-addr, -| ... | dst-addr and MAC addresses. -| ... | *[Ref] Applicable standard specifications:* RFC7348. - -*** Variables *** -| ${vni_1}= | 23 -| ${vni_2}= | 35 - -| ${bd_id1}= | 10 -| ${bd_id2}= | 20 -| ${bd_id3}= | 30 -| ${shg1}= | 1 -| ${shg2}= | 2 - -| ${ip4_addr1}= | 172.16.0.1 -| ${ip4_addr2}= | 172.16.0.2 -| ${ip4_prefix}= | 24 - -| ${ip6_addr1}= | 3ffe:64::1 -| ${ip6_addr2}= | 3ffe:64::2 -| ${ip6_prefix}= | 64 - -| ${sock1}= | /tmp/sock1 -| ${sock2}= | /tmp/sock2 - -| ${qemu1}= | qemu_instance_1 -| ${qemu2}= | qemu_instance_2 - -| ${dut1_vhost1}= | dut1_vhost_if1 -| ${dut1_vhost2}= | dut1_vhost_if2 -| ${dut2_vhost1}= | dut2_vhost_if1 -| ${dut2_vhost2}= | dut2_vhost_if2 - -*** Test Cases *** -| TC01: DUT1 and DUT2 with L2BD and VXLANoIPv4 tunnels switch ICMPv4 between TG links -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 on \ -| | ... | DUT1-DUT2; Eth-IPv4-ICMPv4 on TG-DUTn. [Cfg] On DUT1 and DUT2 -| | ... | configure two i/fs into L2BD with MAC learning. [Ver] Make TG -| | ... | verify ICMPv4 Echo Req pkts are switched thru DUT1 and DUT2 in -| | ... | both directions and are correct on receive. [Ref] RFC7348. -| | Given Path for 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in 3-node path are up -| | ${dut1_to_dut2_name}= | Get interface name | ${dut1_node} | ${dut1_to_dut2} -| | ${dut2_to_dut1_name}= | Get interface name | ${dut2_node} | ${dut2_to_dut1} -| | And IP addresses are set on interfaces | ${dut1_node} | ${dut1_to_dut2_name} | ${NONE} -| | ... | ${dut2_node} | ${dut2_to_dut1_name} | ${NONE} -| | ${dut1s_vxlan}= | When Create VXLAN interface | ${dut1_node} | ${vni_1} -| | | ... | ${dut1s_ip_address} | ${dut2s_ip_address} -| | And Interfaces are added to BD | ${dut1_node} | ${bd_id1} -| | ... | ${dut1_to_tg} | ${dut1s_vxlan} -| | ${dut2s_vxlan}= | And Create VXLAN interface | ${dut2_node} | ${vni_1} -| | | ... | ${dut2s_ip_address} | ${dut1s_ip_address} -| | And Interfaces are added to BD | ${dut2_node} | ${bd_id1} -| | ... | ${dut2_to_tg} | ${dut2s_vxlan} -| | Then Send and receive ICMPv4 bidirectionally -| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} - -| TC02: DUT1 and DUT2 with L2BD and VXLANoIPv4 tunnels in SHG switch ICMPv4 between TG links -| | [Documentation] -| | ... | [Top] TG=DUT1=DUT2=TG. [Enc] Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 on \ -| | ... | DUT1-DUT2; Eth-IPv4-ICMPv4 on TG-DUTn. [Cfg] On DUT1 configure L2 -| | ... | bridge-domain (MAC learning enabled) with two untagged interfaces -| | ... | to TG and two VXLAN interfaces towards the DUT2 and put both VXLAN -| | ... | interfaces into the same Split-Horizon-Group (SHG). On DUT2 configure -| | ... | two L2 bridge-domain (MAC learning enabled), each with one untagged -| | ... | interface to TG and one VXLAN interface towards the DUT1. [Ver] Make -| | ... | TG send ICMPv4 Echo Reqs between all four of its interfaces to be -| | ... | switched by DUT1 and DUT2; verify packets are not switched between -| | ... | TG interfaces connected to DUT2 that are isolated by SHG on DUT1. -| | ... | [Ref] RFC7348. -| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO -| | Given Path for 3-node BD-SHG testing is set | ${nodes['TG']} -| | ... | ${nodes['DUT1']} -| | ... | ${nodes['DUT2']} -| | And Interfaces in 3-node BD-SHG testing are up -| | And Set Interface Address | ${dut1_node} | ${dut1_to_dut2} | ${ip4_addr1} -| | ... | ${ip4_prefix} -| | And Set Interface Address | ${dut2_node} | ${dut2_to_dut1} | ${ip4_addr2} -| | ... | ${ip4_prefix} -| | And VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${ip4_addr2} -| | And VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${ip4_addr1} -| | ${dut1s_vxlan1}= | When Create VXLAN interface | ${dut1_node} | ${vni_1} -| | | ... | ${ip4_addr1} | ${ip4_addr2} -| | ${dut1s_vxlan2}= | And Create VXLAN interface | ${dut1_node} | ${vni_2} -| | | ... | ${ip4_addr1} | ${ip4_addr2} -| | ${dut2s_vxlan1}= | And Create VXLAN interface | ${dut2_node} | ${vni_1} -| | | ... | ${ip4_addr2} | ${ip4_addr1} -| | ${dut2s_vxlan2}= | And Create VXLAN interface | ${dut2_node} | ${vni_2} -| | | ... | ${ip4_addr2} | ${ip4_addr1} -| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan1} | up -| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan2} | up -| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan1} | up -| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan2} | up -| | And Vpp Node Interfaces Ready Wait | ${dut1_node} -| | And Vpp Node Interfaces Ready Wait | ${dut2_node} -| | And Bridge domain on DUT node is created | ${dut1_node} | ${bd_id1} -| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_tg_if1} -| | ... | ${bd_id1} -| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_tg_if2} -| | ... | ${bd_id1} -| | And Interface is added to bridge domain | ${dut1_node} | ${dut1s_vxlan1} -| | ... | ${bd_id1} | ${shg1} -| | And Interface is added to bridge domain | ${dut1_node} | ${dut1s_vxlan2} -| | ... | ${bd_id1} | ${shg1} -| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id2} -| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg_if1} -| | ... | ${bd_id2} -| | And Interface is added to bridge domain | ${dut2_node} | ${dut2s_vxlan1} -| | ... | ${bd_id2} -| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id3} -| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg_if2} -| | ... | ${bd_id3} -| | And Interface is added to bridge domain | ${dut2_node} | ${dut2s_vxlan2} -| | ... | ${bd_id3} -| | Then Send and receive ICMPv4 bidirectionally | ${tg_node} -| | ... | ${tg_to_dut1_if1} -| | ... | ${tg_to_dut2_if1} -| | And Send and receive ICMPv4 bidirectionally | ${tg_node} -| | ... | ${tg_to_dut1_if1} -| | ... | ${tg_to_dut2_if2} -| | And Send and receive ICMPv4 bidirectionally | ${tg_node} -| | ... | ${tg_to_dut1_if2} -| | ... | ${tg_to_dut2_if1} -| | And Send and receive ICMPv4 bidirectionally | ${tg_node} -| | ... | ${tg_to_dut1_if2} -| | ... | ${tg_to_dut2_if2} -| | And Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Send and receive ICMPv4 bidirectionally -| | | ... | ${tg_node} | ${tg_to_dut2_if1} -| | | ... | ${tg_to_dut2_if2} - -| TC03: DUT1 and DUT2 with L2BD and VXLANoIPv4 tunnels in different SHGs switch ICMPv4 between TG links -| | [Documentation] -| | ... | [Top] TG=DUT1=DUT2=TG.[Enc] Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 on \ -| | ... | DUT1-DUT2; Eth-IPv4-ICMPv4 on TG-DUTn. [Cfg] On DUT1 configure L2 -| | ... | bridge-domain (MAC learning enabled) with two untagged interfaces -| | ... | to TG and two VXLAN interfaces towards the DUT2 and put both VXLAN -| | ... | interfaces into the different Split-Horizon-Group (SHGs). On DUT2 -| | ... | configure two L2 bridge-domain (MAC learning enabled), each with one -| | ... | untagged interface to TG and one VXLAN interface towards the DUT1. -| | ... | [Ver] Make TG send ICMPv4 Echo Req between all four of its interfaces -| | ... | to be switched by DUT1 and DUT2; verify packets are switched between -| | ... | all TG interfaces. [Ref] RFC7348. -| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO -| | Given Path for 3-node BD-SHG testing is set | ${nodes['TG']} -| | ... | ${nodes['DUT1']} -| | ... | ${nodes['DUT2']} -| | And Interfaces in 3-node BD-SHG testing are up -| | And Set Interface Address | ${dut1_node} | ${dut1_to_dut2} | ${ip4_addr1} -| | ... | ${ip4_prefix} -| | And Set Interface Address | ${dut2_node} | ${dut2_to_dut1} | ${ip4_addr2} -| | ... | ${ip4_prefix} -| | And VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${ip4_addr2} -| | And VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${ip4_addr1} -| | ${dut1s_vxlan1}= | When Create VXLAN interface | ${dut1_node} | ${vni_1} -| | | ... | ${ip4_addr1} | ${ip4_addr2} -| | ${dut1s_vxlan2}= | And Create VXLAN interface | ${dut1_node} | ${vni_2} -| | | ... | ${ip4_addr1} | ${ip4_addr2} -| | ${dut2s_vxlan1}= | And Create VXLAN interface | ${dut2_node} | ${vni_1} -| | | ... | ${ip4_addr2} | ${ip4_addr1} -| | ${dut2s_vxlan2}= | And Create VXLAN interface | ${dut2_node} | ${vni_2} -| | | ... | ${ip4_addr2} | ${ip4_addr1} -| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan1} | up -| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan2} | up -| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan1} | up -| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan2} | up -| | And Vpp Node Interfaces Ready Wait | ${dut1_node} -| | And Vpp Node Interfaces Ready Wait | ${dut2_node} -| | And Bridge domain on DUT node is created | ${dut1_node} | ${bd_id1} -| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_tg_if1} -| | ... | ${bd_id1} -| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_tg_if2} -| | ... | ${bd_id1} -| | And Interface is added to bridge domain | ${dut1_node} | ${dut1s_vxlan1} -| | ... | ${bd_id1} | ${shg1} -| | And Interface is added to bridge domain | ${dut1_node} | ${dut1s_vxlan2} -| | ... | ${bd_id1} | ${shg2} -| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id2} -| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg_if1} -| | ... | ${bd_id2} -| | And Interface is added to bridge domain | ${dut2_node} | ${dut2s_vxlan1} -| | ... | ${bd_id2} -| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id3} -| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg_if2} -| | ... | ${bd_id3} -| | And Interface is added to bridge domain | ${dut2_node} | ${dut2s_vxlan2} -| | ... | ${bd_id3} -| | Then Send and receive ICMPv4 bidirectionally | ${tg_node} -| | ... | ${tg_to_dut1_if1} -| | ... | ${tg_to_dut2_if1} -| | And Send and receive ICMPv4 bidirectionally | ${tg_node} -| | ... | ${tg_to_dut1_if1} -| | ... | ${tg_to_dut2_if2} -| | And Send and receive ICMPv4 bidirectionally | ${tg_node} -| | ... | ${tg_to_dut1_if2} -| | ... | ${tg_to_dut2_if1} -| | And Send and receive ICMPv4 bidirectionally | ${tg_node} -| | ... | ${tg_to_dut1_if2} -| | ... | ${tg_to_dut2_if2} -| | And Send and receive ICMPv4 bidirectionally | ${tg_node} -| | ... | ${tg_to_dut2_if1} -| | ... | ${tg_to_dut2_if2} - -| TC04: DUT1 and DUT2 with L2BD and VXLANoIPv6 tunnels switch ICMPv6 between TG links -| | [Documentation] -| | ... | [Top] TG=DUT1=DUT2=TG.[Enc] Eth-IPv6-VXLAN-Eth-IPv6-ICMPv6 on \ -| | ... | DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUTn. [Cfg] On DUT1 and DUT2 -| | ... | configure L2 bridge-domain (MAC learning enabled), each with one -| | ... | interface to TG and one VXLAN tunnel interface towards the other -| | ... | DUT. [Ver] Make TG send ICMPv6 Echo Req between two of its -| | ... | interfaces to be switched by DUT1 and DUT2; verify all packets -| | ... | are received. [Ref] RFC7348. -| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO -| | Given Path for 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in 3-node path are up -| | And Set Interface Address | ${dut1_node} | ${dut1_to_dut2} | ${ip6_addr1} -| | ... | ${ip6_prefix} -| | And Set Interface Address | ${dut2_node} | ${dut2_to_dut1} | ${ip6_addr2} -| | ... | ${ip6_prefix} -| | And VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${ip6_addr2} -| | And VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${ip6_addr1} -| | ${dut1s_vxlan}= | When Create VXLAN interface | ${dut1_node} | ${vni_1} -| | | ... | ${ip6_addr1} | ${ip6_addr2} -| | And Interfaces are added to BD | ${dut1_node} | ${bd_id1} -| | ... | ${dut1_to_tg} | ${dut1s_vxlan} -| | ${dut2s_vxlan}= | And Create VXLAN interface | ${dut2_node} | ${vni_1} -| | | ... | ${ip6_addr2} | ${ip6_addr1} -| | And Interfaces are added to BD | ${dut2_node} | ${bd_id1} -| | ... | ${dut2_to_tg} | ${dut2s_vxlan} -| | Then Send and receive ICMPv6 bidirectionally -| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} - -| TC05: DUT1 and DUT2 with L2BD and VXLANoIPv6 tunnels in SHG switch ICMPv6 between TG links -| | [Documentation] -| | ... | [Top] TG=DUT1=DUT2=TG. [Enc] Eth-IPv6-VXLAN-Eth-IPv6-ICMPv6 on \ -| | ... | DUT1-DUT2; Eth-IPv6-ICMPv6 on TG-DUTn. [Cfg] On DUT1 configure L2 -| | ... | bridge-domain (MAC learning enabled) with two untagged interfaces -| | ... | to TG and two VXLAN interfaces towards the DUT2 and put both VXLAN -| | ... | interfaces into the same Split-Horizon-Group (SHG). On DUT2 configure -| | ... | two L2 bridge-domain (MAC learning enabled), each with one untagged -| | ... | interface to TG and one VXLAN interface towards the DUT1. [Ver] Make -| | ... | TG send ICMPv6 Echo Reqs between all four of its interfaces to be -| | ... | switched by DUT1 and DUT2; verify packets are not switched between -| | ... | TG interfaces connected to DUT2 that are isolated by SHG on DUT1. -| | ... | [Ref] RFC7348. -| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO -| | Given Path for 3-node BD-SHG testing is set | ${nodes['TG']} -| | ... | ${nodes['DUT1']} -| | ... | ${nodes['DUT2']} -| | And Interfaces in 3-node BD-SHG testing are up -| | And Set Interface Address | ${dut1_node} | ${dut1_to_dut2} | ${ip6_addr1} -| | ... | ${ip6_prefix} -| | And Set Interface Address | ${dut2_node} | ${dut2_to_dut1} | ${ip6_addr2} -| | ... | ${ip6_prefix} -| | And VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${ip6_addr2} -| | And VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${ip6_addr1} -| | ${dut1s_vxlan1}= | When Create VXLAN interface | ${dut1_node} | ${vni_1} -| | | ... | ${ip6_addr1} | ${ip6_addr2} -| | ${dut1s_vxlan2}= | And Create VXLAN interface | ${dut1_node} | ${vni_2} -| | | ... | ${ip6_addr1} | ${ip6_addr2} -| | ${dut2s_vxlan1}= | And Create VXLAN interface | ${dut2_node} | ${vni_1} -| | | ... | ${ip6_addr2} | ${ip6_addr1} -| | ${dut2s_vxlan2}= | And Create VXLAN interface | ${dut2_node} | ${vni_2} -| | | ... | ${ip6_addr2} | ${ip6_addr1} -| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan1} | up -| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan2} | up -| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan1} | up -| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan2} | up -| | And Vpp Node Interfaces Ready Wait | ${dut1_node} -| | And Vpp Node Interfaces Ready Wait | ${dut2_node} -| | And Bridge domain on DUT node is created | ${dut1_node} | ${bd_id1} -| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_tg_if1} -| | ... | ${bd_id1} -| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_tg_if2} -| | ... | ${bd_id1} -| | And Interface is added to bridge domain | ${dut1_node} | ${dut1s_vxlan1} -| | ... | ${bd_id1} | ${shg1} -| | And Interface is added to bridge domain | ${dut1_node} | ${dut1s_vxlan2} -| | ... | ${bd_id1} | ${shg1} -| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id2} -| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg_if1} -| | ... | ${bd_id2} -| | And Interface is added to bridge domain | ${dut2_node} | ${dut2s_vxlan1} -| | ... | ${bd_id2} -| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id3} -| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg_if2} -| | ... | ${bd_id3} -| | And Interface is added to bridge domain | ${dut2_node} | ${dut2s_vxlan2} -| | ... | ${bd_id3} -| | Then Send and receive ICMPv6 bidirectionally | ${tg_node} -| | ... | ${tg_to_dut1_if1} -| | ... | ${tg_to_dut2_if1} -| | And Send and receive ICMPv6 bidirectionally | ${tg_node} -| | ... | ${tg_to_dut1_if1} -| | ... | ${tg_to_dut2_if2} -| | And Send and receive ICMPv6 bidirectionally | ${tg_node} -| | ... | ${tg_to_dut1_if2} -| | ... | ${tg_to_dut2_if1} -| | And Send and receive ICMPv6 bidirectionally | ${tg_node} -| | ... | ${tg_to_dut1_if2} -| | ... | ${tg_to_dut2_if2} -| | And Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Send and receive ICMPv6 bidirectionally -| | | ... | ${tg_node} | ${tg_to_dut2_if1} -| | | ... | ${tg_to_dut2_if2} - -| TC06: DUT1 and DUT2 with L2BD and VXLANoIPv6 tunnels in different SHGs switch ICMPv6 between TG links -| | [Documentation] -| | ... | [Top] TG=DUT1=DUT2=TG.[Enc] Eth-IPv6-VXLAN-Eth-IPv6-ICMPv6 on \ -| | ... | DUT1-DUT2; Eth-IPv6-ICMPv6 on TG-DUTn. [Cfg] On DUT1 configure L2 -| | ... | bridge-domain (MAC learning enabled) with two untagged interfaces -| | ... | to TG and two VXLAN interfaces towards the DUT2 and put both VXLAN -| | ... | interfaces into the different Split-Horizon-Group (SHGs). On DUT2 -| | ... | configure two L2 bridge-domain (MAC learning enabled), each with one -| | ... | untagged interface to TG and one VXLAN interface towards the DUT1. -| | ... | [Ver] Make TG send ICMPv6 Echo Req between all four of its interfaces -| | ... | to be switched by DUT1 and DUT2; verify packets are switched between -| | ... | all TG interfaces. [Ref] RFC7348. -| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO -| | Given Path for 3-node BD-SHG testing is set | ${nodes['TG']} -| | ... | ${nodes['DUT1']} -| | ... | ${nodes['DUT2']} -| | And Interfaces in 3-node BD-SHG testing are up -| | And Set Interface Address | ${dut1_node} | ${dut1_to_dut2} | ${ip6_addr1} -| | ... | ${ip6_prefix} -| | And Set Interface Address | ${dut2_node} | ${dut2_to_dut1} | ${ip6_addr2} -| | ... | ${ip6_prefix} -| | And VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${ip6_addr2} -| | And VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${ip6_addr1} -| | ${dut1s_vxlan1}= | When Create VXLAN interface | ${dut1_node} | ${vni_1} -| | | ... | ${ip6_addr1} | ${ip6_addr2} -| | ${dut1s_vxlan2}= | And Create VXLAN interface | ${dut1_node} | ${vni_2} -| | | ... | ${ip6_addr1} | ${ip6_addr2} -| | ${dut2s_vxlan1}= | And Create VXLAN interface | ${dut2_node} | ${vni_1} -| | | ... | ${ip6_addr2} | ${ip6_addr1} -| | ${dut2s_vxlan2}= | And Create VXLAN interface | ${dut2_node} | ${vni_2} -| | | ... | ${ip6_addr2} | ${ip6_addr1} -| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan1} | up -| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan2} | up -| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan1} | up -| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan2} | up -| | And Vpp Node Interfaces Ready Wait | ${dut1_node} -| | And Vpp Node Interfaces Ready Wait | ${dut2_node} -| | And Bridge domain on DUT node is created | ${dut1_node} | ${bd_id1} -| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_tg_if1} -| | ... | ${bd_id1} -| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_tg_if2} -| | ... | ${bd_id1} -| | And Interface is added to bridge domain | ${dut1_node} | ${dut1s_vxlan1} -| | ... | ${bd_id1} | ${shg1} -| | And Interface is added to bridge domain | ${dut1_node} | ${dut1s_vxlan2} -| | ... | ${bd_id1} | ${shg2} -| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id2} -| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg_if1} -| | ... | ${bd_id2} -| | And Interface is added to bridge domain | ${dut2_node} | ${dut2s_vxlan1} -| | ... | ${bd_id2} -| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id3} -| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg_if2} -| | ... | ${bd_id3} -| | And Interface is added to bridge domain | ${dut2_node} | ${dut2s_vxlan2} -| | ... | ${bd_id3} -| | Then Send and receive ICMPv6 bidirectionally | ${tg_node} -| | ... | ${tg_to_dut1_if1} -| | ... | ${tg_to_dut2_if1} -| | And Send and receive ICMPv6 bidirectionally | ${tg_node} -| | ... | ${tg_to_dut1_if1} -| | ... | ${tg_to_dut2_if2} -| | And Send and receive ICMPv6 bidirectionally | ${tg_node} -| | ... | ${tg_to_dut1_if2} -| | ... | ${tg_to_dut2_if1} -| | And Send and receive ICMPv6 bidirectionally | ${tg_node} -| | ... | ${tg_to_dut1_if2} -| | ... | ${tg_to_dut2_if2} -| | And Send and receive ICMPv6 bidirectionally | ${tg_node} -| | ... | ${tg_to_dut2_if1} -| | ... | ${tg_to_dut2_if2} - -| TC07:DUT1 and DUT2 with two L2BDs and VXLANoIPv4 tunnel switch ICMPv4 between TG links and VM links -| | [Documentation] -| | ... | [Top] TG-DUT1-VM-DUT1-DUT2-VM-DUT2-TG. -| | ... | [Enc] Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 on DUT1-DUT2; Eth-IPv4-ICMPv4 -| | ... | on TG-DUTn and DUTn=VM. -| | ... | [Cfg] On both DUTs configure two L2BDs (MAC learning enabled); first -| | ... | L2BD with untagged interface to TG and vhost-user interface to local -| | ... | VM, second one with vhost-user interface to local VM and VXLAN -| | ... | interface towards the other DUT. Configure linux bridge on both VMs -| | ... | to pass traffic between both vhost-user interfaces. -| | ... | [Ver] Make TG send ICMPv4 Echo Req between two of its interfaces to -| | ... | be switched by DUT1 and DUT2; verify packets are switched between -| | ... | these TG interfaces. -| | ... | [Ref] RFC7348. -| | [Tags] | VPP_VM_ENV -| | Given Path for 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in 3-node path are up -| | When VPP Vhost interfaces for L2BD forwarding are setup | ${dut1_node} -| | ... | ${sock1} -| | ... | ${sock2} -| | ... | ${dut1_vhost1} -| | ... | ${dut1_vhost2} -| | And VPP Vhost interfaces for L2BD forwarding are setup | ${dut2_node} -| | ... | ${sock1} -| | ... | ${sock2} -| | ... | ${dut2_vhost1} -| | ... | ${dut2_vhost2} -| | And VM for Vhost L2BD forwarding is setup | ${dut1_node} | ${sock1} -| | ... | ${sock2} | ${qemu1} -| | And VM for Vhost L2BD forwarding is setup | ${dut2_node} | ${sock1} -| | ... | ${sock2} | ${qemu2} -| | And Set Interface Address | ${dut1_node} | ${dut1_to_dut2} | ${ip4_addr1} -| | ... | ${ip4_prefix} -| | And Set Interface Address | ${dut2_node} | ${dut2_to_dut1} | ${ip4_addr2} -| | ... | ${ip4_prefix} -| | And VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${ip4_addr2} -| | And VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${ip4_addr1} -| | ${dut1s_vxlan}= | And Create VXLAN interface | ${dut1_node} | ${vni_1} -| | | ... | ${ip4_addr1} | ${ip4_addr2} -| | ${dut2s_vxlan}= | And Create VXLAN interface | ${dut2_node} | ${vni_1} -| | | ... | ${ip4_addr2} | ${ip4_addr1} -| | And Interfaces are added to BD | ${dut1_node} | ${bd_id1} -| | ... | ${dut1_to_tg} | ${${dut1_vhost1}} -| | And Interfaces are added to BD | ${dut1_node} | ${bd_id2} -| | ... | ${dut1s_vxlan} | ${${dut1_vhost2}} -| | And Interfaces are added to BD | ${dut2_node} | ${bd_id1} -| | ... | ${dut2_to_tg} | ${${dut2_vhost1}} -| | And Interfaces are added to BD | ${dut2_node} | ${bd_id2} -| | ... | ${dut2s_vxlan} | ${${dut2_vhost2}} -| | Then Send and receive ICMPv4 bidirectionally -| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} -| | [Teardown] | Run Keywords | Show Packet Trace on All DUTs | ${nodes} -| | ... | AND | Show vpp trace dump on all DUTs -| | ... | AND | Run keyword | Qemu Teardown | ${dut1_node} -| | ... | ${${qemu1}} | ${qemu1} -| | ... | AND | Run keyword | Qemu Teardown | ${dut2_node} -| | ... | ${${qemu2}} | ${qemu2} -| | ... | AND | Check VPP PID in Teardown - -| TC08:DUT1 and DUT2 with two L2BDs and VXLANoIPv6 tunnel switch ICMPv6 between TG links and VM links -| | [Documentation] -| | ... | [Top] TG-DUT1-VM-DUT1-DUT2-VM-DUT2-TG. -| | ... | [Enc] Eth-IPv6-VXLAN-Eth-IPv6-ICMPv6 on DUT1-DUT2; Eth-IPv4-ICMPv4 -| | ... | on TG-DUTn and DUTn=VM. -| | ... | [Cfg] On both DUTs configure two L2BDs (MAC learning enabled); first -| | ... | L2BD with untagged interface to TG and vhost-user interface to local -| | ... | VM, second one with vhost-user interface to local VM and VXLAN -| | ... | interface towards the other DUT. Configure linux bridge on both VMs -| | ... | to pass traffic between both vhost-user interfaces. -| | ... | [Ver] Make TG send ICMPv6 Echo Req between two of its interfaces to -| | ... | be switched by DUT1 and DUT2; verify packets are switched between -| | ... | these TG interfaces. -| | ... | [Ref] RFC7348. -| | [Tags] | VPP_VM_ENV -| | Given Path for 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in 3-node path are up -| | When VPP Vhost interfaces for L2BD forwarding are setup | ${dut1_node} -| | ... | ${sock1} -| | ... | ${sock2} -| | ... | ${dut1_vhost1} -| | ... | ${dut1_vhost2} -| | And VPP Vhost interfaces for L2BD forwarding are setup | ${dut2_node} -| | ... | ${sock1} -| | ... | ${sock2} -| | ... | ${dut2_vhost1} -| | ... | ${dut2_vhost2} -| | And VM for Vhost L2BD forwarding is setup | ${dut1_node} | ${sock1} -| | ... | ${sock2} | ${qemu1} -| | And VM for Vhost L2BD forwarding is setup | ${dut2_node} | ${sock1} -| | ... | ${sock2} | ${qemu2} -| | And Set Interface Address | ${dut1_node} | ${dut1_to_dut2} | ${ip6_addr1} -| | ... | ${ip6_prefix} -| | And Set Interface Address | ${dut2_node} | ${dut2_to_dut1} | ${ip6_addr2} -| | ... | ${ip6_prefix} -| | And VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${ip4_addr2} -| | And VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${ip4_addr1} -| | ${dut1s_vxlan}= | And Create VXLAN interface | ${dut1_node} | ${vni_1} -| | | ... | ${ip6_addr1} | ${ip6_addr2} -| | ${dut2s_vxlan}= | And Create VXLAN interface | ${dut2_node} | ${vni_1} -| | | ... | ${ip6_addr2} | ${ip6_addr1} -| | And Interfaces are added to BD | ${dut1_node} | ${bd_id1} -| | ... | ${dut1_to_tg} | ${${dut1_vhost1}} -| | And Interfaces are added to BD | ${dut1_node} | ${bd_id2} -| | ... | ${dut1s_vxlan} | ${${dut1_vhost2}} -| | And Interfaces are added to BD | ${dut2_node} | ${bd_id1} -| | ... | ${dut2_to_tg} | ${${dut2_vhost1}} -| | And Interfaces are added to BD | ${dut2_node} | ${bd_id2} -| | ... | ${dut2s_vxlan} | ${${dut2_vhost2}} -| | Then Send and receive ICMPv6 bidirectionally -| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} -| | [Teardown] | Run Keywords | Show Packet Trace on All DUTs | ${nodes} -| | ... | AND | Show vpp trace dump on all DUTs -| | ... | AND | Run keyword | Qemu Teardown | ${dut1_node} -| | ... | ${${qemu1}} | ${qemu1} -| | ... | AND | Run keyword | Qemu Teardown | ${dut2_node} -| | ... | ${${qemu2}} | ${qemu2} -| | ... | AND | Check VPP PID in Teardown |