diff options
Diffstat (limited to 'tests/honeycomb/func/mgmt-cfg-l2fib-apihc-apivat-func.robot')
| -rw-r--r-- | tests/honeycomb/func/mgmt-cfg-l2fib-apihc-apivat-func.robot | 232 |
1 files changed, 232 insertions, 0 deletions
diff --git a/tests/honeycomb/func/mgmt-cfg-l2fib-apihc-apivat-func.robot b/tests/honeycomb/func/mgmt-cfg-l2fib-apihc-apivat-func.robot new file mode 100644 index 0000000000..9aae85c7ac --- /dev/null +++ b/tests/honeycomb/func/mgmt-cfg-l2fib-apihc-apivat-func.robot @@ -0,0 +1,232 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/honeycomb/honeycomb.robot +| Resource | resources/libraries/robot/honeycomb/interfaces.robot +| Resource | resources/libraries/robot/honeycomb/bridge_domain.robot +| Resource | resources/libraries/robot/honeycomb/l2_fib.robot +| Variables | resources/test_data/honeycomb/l2_fib.py | ${node} | ${interface} +| ... | ${interface2} +| ... +| Documentation | *Honeycomb L2 FIB management test suite.* +| ... +| Suite Setup | Set Up Honeycomb Functional Test Suite | ${node} +| ... +| Suite Teardown | Tear Down Honeycomb Functional Test Suite | ${node} +| ... +| Force Tags | HC_FUNC + +*** Variables *** +# Interface to run tests on. +| ${interface}= | ${node['interfaces']['port1']['name']} +| ${interface2}= | ${node['interfaces']['port3']['name']} + +*** Test Cases *** +| TC01: Honeycomb adds L2 FIB entry (forward) +| | [Documentation] | Honeycomb creates a bridge domain and assignes an \ +| | ... | interface to it. Then adds an L2 FIB entry (forward) to the bridge \ +| | ... | domain. +| | ... +| | [Teardown] | Honeycomb removes L2 FIB entry +| | ... | ${node} | ${bd_name} | ${l2_fib_forward_oper['phys-address']} +| | ... +| | Given Interface state from Honeycomb should be +| | ... | ${node} | ${interface} | down +| | When Honeycomb configures interface state +| | ... | ${node} | ${interface} | up +| | Then Interface state from Honeycomb should be +| | ... | ${node} | ${interface} | up +| | When Honeycomb creates first l2 bridge domain +| | ... | ${node} | ${bd_name} | ${bd_settings} +| | Then Bridge domain Operational Data From Honeycomb Should Be +| | ... | ${node} | ${bd_name} | ${bd_settings} +| | Given Bridge domain Operational Interface Assignment should be empty +| | ... | ${node} | ${interface} +| | When Honeycomb adds interface to bridge domain +| | ... | ${node} | ${interface} | ${bd_name} | ${if_bd_settings} +| | Then Bridge domain Operational Interface Assignment should be +| | ... | ${node} | ${interface} | ${if_bd_settings} +| | Given L2 FIB Table from Honeycomb should be empty +| | ... | ${node} | ${bd_name} +| | And L2 FIB Table from VAT should be empty +| | ... | ${node} | ${bd_index} +| | When Honeycomb adds L2 FIB entry to bridge domain +| | ... | ${node} | ${bd_name} | ${l2_fib_forward_cfg} +| | Then L2 FIB Entry from Honeycomb should be +| | ... | ${node} | ${bd_name} | ${l2_fib_forward_oper} +| | And L2 FIB entry from VAT should be +| | ... | ${node} | ${bd_index} | ${l2_fib_forward_vat} + +| TC02: Honeycomb adds L2 FIB entry (static, forward) +| | [Documentation] | Honeycomb adds an L2 FIB entry (static, forward) to the \ +| | ... | bridge domain. +| | ... +| | [Teardown] | Honeycomb removes L2 FIB entry +| | ... | ${node} | ${bd_name} | ${l2_fib_static_forward_oper['phys-address']} +| | ... +| | Given Bridge domain Operational Interface Assignment should be +| | ... | ${node} | ${interface} | ${if_bd_settings} +| | And L2 FIB Table from Honeycomb should be empty +| | ... | ${node} | ${bd_name} +| | And L2 FIB Table from VAT should be empty +| | ... | ${node} | ${bd_index} +| | When Honeycomb adds L2 FIB entry to bridge domain +| | ... | ${node} | ${bd_name} | ${l2_fib_static_forward_cfg} +| | Then L2 FIB Entry from Honeycomb should be +| | ... | ${node} | ${bd_name} | ${l2_fib_static_forward_oper} +| | And L2 FIB entry from VAT should be +| | ... | ${node} | ${bd_index} | ${l2_fib_static_forward_vat} + +| TC03: Honeycomb adds L2 FIB entry (static, filter) +| | [Documentation] | Honeycomb adds an L2 FIB entry (static, filter) to the \ +| | ... | bridge domain. +| | ... +| | [Teardown] | Honeycomb removes L2 FIB entry +| | ... | ${node} | ${bd_name} | ${l2_fib_filter_oper['phys-address']} +| | ... +| | Given Bridge domain Operational Interface Assignment should be +| | ... | ${node} | ${interface} | ${if_bd_settings} +| | And L2 FIB Table from Honeycomb should be empty +| | ... | ${node} | ${bd_name} +| | And L2 FIB Table from VAT should be empty +| | ... | ${node} | ${bd_index} +| | When Honeycomb adds L2 FIB entry to bridge domain +| | ... | ${node} | ${bd_name} | ${l2_fib_filter_cfg} +| | Then L2 FIB Entry from Honeycomb should be +| | ... | ${node} | ${bd_name} | ${l2_fib_filter_oper} +| | And L2 FIB entry from VAT should be +| | ... | ${node} | ${bd_index} | ${l2_fib_filter_vat} + +| TC04: Honeycomb adds and removes L2 FIB entry (forward) +| | [Documentation] | Honeycomb adds an L2 FIB entry (forward) to the bridge \ +| | ... | domain and then Honeycomb removes it from the bridge domain. +| | ... +| | [Teardown] | Honeycomb removes L2 FIB entry +| | ... | ${node} | ${bd_name} | ${l2_fib_forward_oper['phys-address']} +| | ... +| | Given Bridge domain Operational Interface Assignment should be +| | ... | ${node} | ${interface} | ${if_bd_settings} +| | And L2 FIB Table from Honeycomb should be empty +| | ... | ${node} | ${bd_name} +| | And L2 FIB Table from VAT should be empty +| | ... | ${node} | ${bd_index} +| | When Honeycomb adds L2 FIB entry to bridge domain +| | ... | ${node} | ${bd_name} | ${l2_fib_forward_cfg} +| | Then L2 FIB Entry from Honeycomb should be +| | ... | ${node} | ${bd_name} | ${l2_fib_forward_oper} +| | And L2 FIB entry from VAT should be +| | ... | ${node} | ${bd_index} | ${l2_fib_forward_vat} +| | When Honeycomb removes L2 FIB entry +| | ... | ${node} | ${bd_name} | ${l2_fib_forward_oper['phys-address']} +| | Then L2 FIB Table from Honeycomb should be empty +| | ... | ${node} | ${bd_name} +| | And L2 FIB Table from VAT should be empty +| | ... | ${node} | ${bd_index} + +| TC05: Honeycomb adds more than one L2 FIB entry +| | [Documentation] | Honeycomb adds three L2 FIB entries to the bridge domain. +| | ... +| | [Teardown] | Honeycomb removes all L2 FIB entries +| | ... | ${node} | ${bd_name} +| | ... +| | Given Bridge domain Operational Interface Assignment should be +| | ... | ${node} | ${interface} | ${if_bd_settings} +| | And L2 FIB Table from Honeycomb should be empty +| | ... | ${node} | ${bd_name} +| | And L2 FIB Table from VAT should be empty +| | ... | ${node} | ${bd_index} +| | When Honeycomb adds L2 FIB entry to bridge domain +| | ... | ${node} | ${bd_name} | ${l2_fib_forward_cfg} +| | And Honeycomb adds L2 FIB entry to bridge domain +| | ... | ${node} | ${bd_name} | ${l2_fib_static_forward_cfg} +| | And Honeycomb adds L2 FIB entry to bridge domain +| | ... | ${node} | ${bd_name} | ${l2_fib_filter_cfg} +| | Then L2 FIB Entry from Honeycomb should be +| | ... | ${node} | ${bd_name} | ${l2_fib_forward_oper} +| | And L2 FIB Entry from Honeycomb should be +| | ... | ${node} | ${bd_name} | ${l2_fib_static_forward_oper} +| | And L2 FIB Entry from Honeycomb should be +| | ... | ${node} | ${bd_name} | ${l2_fib_filter_oper} +| | And L2 FIB entry from VAT should be +| | ... | ${node} | ${bd_index} | ${l2_fib_forward_vat} +| | And L2 FIB entry from VAT should be +| | ... | ${node} | ${bd_index} | ${l2_fib_static_forward_vat} +| | And L2 FIB entry from VAT should be +| | ... | ${node} | ${bd_index} | ${l2_fib_filter_vat} + +| TC06: Honeycomb fails to set wrong L2 FIB entry +| | [Documentation] | Honeycomb tries to add an L2 FIB entry with wrong \ +| | ... | parameters to the bridge domain. It must fail. +| | ... +| | [Teardown] | Honeycomb removes all L2 FIB entries +| | ... | ${node} | ${bd_name} +| | ... +| | Given Bridge domain Operational Interface Assignment should be +| | ... | ${node} | ${interface} | ${if_bd_settings} +| | And L2 FIB Table from Honeycomb should be empty +| | ... | ${node} | ${bd_name} +| | And L2 FIB Table from VAT should be empty +| | ... | ${node} | ${bd_index} +| | When Honeycomb fails to add wrong L2 FIB entry +| | ... | ${node} | ${bd_name} | ${l2_fib_forward_cfg_wrong_mac} +| | Then L2 FIB Table from Honeycomb should be empty +| | ... | ${node} | ${bd_name} +| | And L2 FIB Table from VAT should be empty +| | ... | ${node} | ${bd_index} +| | When Honeycomb fails to add wrong L2 FIB entry +| | ... | ${node} | ${bd_name} | ${l2_fib_forward_cfg_wrong_if} +| | Then L2 FIB Table from Honeycomb should be empty +| | ... | ${node} | ${bd_name} +| | And L2 FIB Table from VAT should be empty +| | ... | ${node} | ${bd_index} +| | When Honeycomb fails to add wrong L2 FIB entry +| | ... | ${node} | ${bd_name} | ${l2_fib_forward_cfg_wrong_action} +| | Then L2 FIB Table from Honeycomb should be empty +| | ... | ${node} | ${bd_name} +| | And L2 FIB Table from VAT should be empty +| | ... | ${node} | ${bd_index} + +| TC07: Honeycomb fails to modify existing L2 FIB entry +| | [Documentation] | Honeycomb tries to modify an existing L2 FIB entry. It \ +| | ... | must fail. +| | ... +| | [Teardown] | Honeycomb removes all L2 FIB entries +| | ... | ${node} | ${bd_name} +| | ... +| | Given Bridge domain Operational Interface Assignment should be +| | ... | ${node} | ${interface} | ${if_bd_settings} +| | And L2 FIB Table from Honeycomb should be empty +| | ... | ${node} | ${bd_name} +| | And L2 FIB Table from VAT should be empty +| | ... | ${node} | ${bd_index} +| | When Honeycomb adds L2 FIB entry to bridge domain +| | ... | ${node} | ${bd_name} | ${l2_fib_forward_cfg} +| | Then L2 FIB Entry from Honeycomb should be +| | ... | ${node} | ${bd_name} | ${l2_fib_forward_oper} +| | When Honeycomb fails to modify L2 FIB entry +| | ... | ${node} | ${bd_name} | ${l2_fib_forward_oper['phys-address']} +| | ... | outgoing-interface +| | ... | ${l2_fib_forward_modified_cfg['outgoing-interface']} +| | Then L2 FIB Entry from Honeycomb should be +| | ... | ${node} | ${bd_name} | ${l2_fib_forward_oper} +| | And L2 FIB entry from VAT should be +| | ... | ${node} | ${bd_index} | ${l2_fib_forward_vat} + +*** Keywords *** +| Set test interface down +| | [Documentation] | Set the interface used in tests down. +| | ... +| | Honeycomb configures interface state +| | ... | ${node} | ${interface} | down |