diff options
Diffstat (limited to 'tests/honeycomb/func/mgmt-cfg-pluginacl-apihc-apivat-func.robot')
| -rw-r--r-- | tests/honeycomb/func/mgmt-cfg-pluginacl-apihc-apivat-func.robot | 765 |
1 files changed, 765 insertions, 0 deletions
diff --git a/tests/honeycomb/func/mgmt-cfg-pluginacl-apihc-apivat-func.robot b/tests/honeycomb/func/mgmt-cfg-pluginacl-apihc-apivat-func.robot new file mode 100644 index 0000000000..302b22fa4e --- /dev/null +++ b/tests/honeycomb/func/mgmt-cfg-pluginacl-apihc-apivat-func.robot @@ -0,0 +1,765 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Variables *** +| &{if_settings}= | enabled=True +# Bridge domain settings +| ${bd_name}= | bd1 +| &{bd_settings}= | flood=${True} | forward=${True} | learn=${True} +| ... | unknown-unicast-flood=${True} | arp-termination=${False} +| &{bd_if_settings}= | split_horizon_group=${0} | bvi=${False} +# Names for AC lists +| ${acl_name_macip}= | macip +| ${acl_name_l3_ip4}= | acl_l3_ip4 +| ${acl_name_l3_ip6}= | acl_l3_ip6 +| ${acl_name_l4}= | acl_l4 +| ${acl_name_mixed}= | acl_mixed +| ${acl_name_icmp}= | acl_icmp +| ${acl_name_icmpv6}= | acl_icmpv6 +| ${acl_name_reflex}= | acl_reflex + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/honeycomb/honeycomb.robot +| Resource | resources/libraries/robot/honeycomb/interfaces.robot +| Resource | resources/libraries/robot/honeycomb/bridge_domain.robot +| Resource | resources/libraries/robot/honeycomb/access_control_lists.robot +| Resource | resources/libraries/robot/shared/testing_path.robot +| Resource | resources/libraries/robot/shared/traffic.robot +| Library | resources.libraries.python.honeycomb.HcAPIKwACL.ACLKeywords +| Library | resources.libraries.python.Trace +| Library | resources.libraries.python.IPv4Setup +| Library | resources.libraries.python.IPv4Util +| Library | resources.libraries.python.IPv6Util +| Library | resources.libraries.python.Routing +| ... +| Test Setup | Clear Packet Trace on All DUTs | ${nodes} +| ... +| Suite Setup | Set Up Honeycomb Functional Test Suite | ${node} +| ... +| Suite Teardown | Tear Down Honeycomb Functional Test Suite | ${node} +| ... +| Documentation | *Honeycomb access control lists test suite for ACL plugin.* +| ... +| Force Tags | HC_FUNC + +*** Test Cases *** +| TC01: ACL MAC filtering through plugin-acl node - bridged +| | [Documentation] +| | ... | [Top] TG=DUT1=TG. +| | ... | [Enc] Eth-IPv4-TCP. +| | ... | [Cfg] (Using Honeycomb API) On DUT1 bridge both interfaces to TG\ +| | ... | and configure L2 MAC ACL on ingress interface. +| | ... | [Ver] Send simple TCP packets from one TG interface to the other,\ +| | ... | using different MACs. Receive all packets except those with\ +| | ... | MACs in the filtered ranges. +| | ... +| | [Teardown] | Bridged ACL test teardown +| | ... +| | Given Setup Interfaces And Bridge Domain For plugin-acl Test +| | ... | macip | ${acl_name_macip} +| | When Honeycomb Creates ACL Chain Through ACL plugin +| | ... | ${dut_node} | ${acl_name_macip} | ${acl_settings} | macip=${True} +| | And Honeycomb Assigns plugin-acl Chain To Interface +| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_macip} +| | ... | ingress | macip=${True} +| | Then Send TCP or UDP packet and verify received packet | ${tg_node} +| | ... | ${src_ip} | ${dst_ip} +| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} +| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} +| | ... | TCP | ${src_port} | ${dst_port} +| | And Run Keyword And Expect Error | TCP/UDP Rx timeout +| | ... | Send TCP or UDP packet and verify received packet | ${tg_node} +| | ... | ${src_ip} | ${dst_ip} +| | ... | ${tg_to_dut_if1} | ${classify_src} +| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} +| | ... | TCP | ${src_port} | ${dst_port} +| | And Run Keyword And Expect Error | TCP/UDP Rx timeout +| | ... | Send TCP or UDP packet and verify received packet | ${tg_node} +| | ... | ${src_ip} | ${dst_ip} +| | ... | ${tg_to_dut_if1} | ${classify_src2} +| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} +| | ... | TCP | ${src_port} | ${dst_port} + +| TC02: ACL IPv4 filtering through plugin-acl node - bridged +| | [Documentation] +| | ... | [Top] TG=DUT1=TG. +| | ... | [Enc] Eth-IPv4-TCP. +| | ... | [Cfg] (Using Honeycomb API) On DUT1 bridge both interfaces to TG\ +| | ... | and configure L3 IPv4 ACL on ingress interface with src/dst IP +| | ... | and protocol number. +| | ... | [Ver] Send simple TCP and UDP packets from one TG interface\ +| | ... | to the other, using different IPv4 IPs. Receive all packets except\ +| | ... | those with IPs in the filtered ranges and UDP protocol payload. +| | ... +| | [Teardown] | Bridged ACL test teardown +| | ... +| | Given Setup Interfaces And Bridge Domain For plugin-acl Test +| | ... | l3_ip4 | ${acl_name_l3_ip4} +| | When Honeycomb Creates ACL Chain Through ACL plugin +| | ... | ${dut_node} | ${acl_name_l3_ip4} | ${acl_settings} +| | And Honeycomb Assigns plugin-acl Chain To Interface +| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_l3_ip4} | ingress +| | Then Send TCP or UDP packet and verify received packet | ${tg_node} +| | ... | ${src_ip} | ${dst_ip} +| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} +| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} +| | ... | UDP | ${src_port} | ${dst_port} +| | And Send TCP or UDP packet and verify received packet | ${tg_node} +| | ... | ${classify_src} | ${classify_dst} +| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} +| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} +| | ... | TCP | ${src_port} | ${dst_port} +| | And Run Keyword And Expect Error | TCP/UDP Rx timeout +| | ... | Send TCP or UDP packet and verify received packet | ${tg_node} +| | ... | ${classify_src} | ${classify_dst} +| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} +| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} +| | ... | UDP | ${src_port} | ${dst_port} + +| TC03: ACL IPv6 filtering through plugin-acl node - bridged +| | [Documentation] +| | ... | [Top] TG=DUT1=TG. +| | ... | [Enc] Eth-IPv6-TCP. +| | ... | [Cfg] (Using Honeycomb API) On DUT1 bridge both interfaces to TG\ +| | ... | and configure L3 IPv6 ACL on ingress interface with src/dst IP +| | ... | and protocol number. +| | ... | [Ver] Send simple TCP and UDP packets from one TG interface\ +| | ... | to the other, using different IPv6 IPs. Receive all packets except\ +| | ... | those with IPs in the filtered ranges and UDP protocol payload. +| | ... +| | [Teardown] | Bridged ACL test teardown +| | ... +| | Given Setup interfaces and bridge domain for plugin-acl test +| | ... | l3_ip6 | ${acl_name_l3_ip6} +| | When Honeycomb Creates ACL Chain Through ACL plugin +| | ... | ${dut_node} | ${acl_name_l3_ip6} | ${acl_settings} +| | And Honeycomb Assigns plugin-acl Chain To Interface +| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_l3_ip6} | ingress +| | Then Send TCP or UDP packet and verify received packet | ${tg_node} +| | ... | ${src_ip} | ${dst_ip} +| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} +| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} +| | ... | UDP | ${src_port} | ${dst_port} +| | And Send TCP or UDP packet and verify received packet | ${tg_node} +| | ... | ${classify_src} | ${classify_dst} +| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} +| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} +| | ... | TCP | ${src_port} | ${dst_port} +| | And Run Keyword And Expect Error | TCP/UDP Rx timeout +| | ... | Send TCP or UDP packet and verify received packet | ${tg_node} +| | ... | ${classify_src} | ${classify_dst} +| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} +| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} +| | ... | UDP | ${src_port} | ${dst_port} + +| TC04: ACL port filtering through plugin-acl node - bridged +| | [Documentation] +| | ... | [Top] TG=DUT1=TG. +| | ... | [Enc] Eth-IPv4-TCP. +| | ... | [Cfg] (Using Honeycomb API) On DUT1 bridge both interfaces to TG\ +| | ... | and and configure L4 port ACL on ingress interface +| | ... | with src/dst port ranges. +| | ... | [Ver] Send simple TCP and UDP packets from one TG interface\ +| | ... | to the other, using different ports. Receive all packets except\ +| | ... | those with ports in the filtered ranges. +| | ... +| | [Teardown] | Bridged ACL test teardown +| | ... +| | Given Setup interfaces and bridge domain for plugin-acl test +| | ... | L4 | ${acl_name_l4} +| | When Honeycomb Creates ACL Chain Through ACL plugin +| | ... | ${dut_node} | ${acl_name_l4} | ${acl_settings} +| | And Honeycomb Assigns plugin-acl Chain To Interface +| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_l4} | ingress +| | Then Send TCP or UDP packet and verify received packet | ${tg_node} +| | ... | ${src_ip} | ${dst_ip} +| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} +| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} +| | ... | TCP | ${src_port} | ${dst_port} +| | And Run Keyword And Expect Error | TCP/UDP Rx timeout +| | ... | Send TCP or UDP packet and verify received packet | ${tg_node} +| | ... | ${src_ip} | ${dst_ip} +| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} +| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} +| | ... | TCP | ${classify_src} | ${classify_dst} +| | And Run Keyword And Expect Error | TCP/UDP Rx timeout +| | ... | Send TCP or UDP packet and verify received packet | ${tg_node} +| | ... | ${src_ip} | ${dst_ip} +| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} +| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} +| | ... | TCP | ${classify_src+5} | ${classify_dst+5} + +| TC05: ACL filtering with IPv4 address and TCP port in one rule - bridged +| | [Documentation] +| | ... | [Top] TG=DUT1=TG. +| | ... | [Enc] Eth-IPv4-TCP. +| | ... | [Cfg] (Using Honeycomb API) On DUT1 bridge both interfaces to TG\ +| | ... | and configure a mixed rule with src/dst IP, TCP protocol +| | ... | and port ranges. +| | ... | [Ver] Send simple TCP packets from one TG interface to the other,\ +| | ... | using IPs and ports. Receive all packets except those with\ +| | ... | both IPs and ports in the filtered ranges. +| | ... +| | [Teardown] | Bridged ACL test teardown +| | ... +| | Given Setup Interfaces And Bridge Domain For plugin-acl Test +| | ... | mixed | ${acl_name_mixed} +| | When Honeycomb Creates ACL Chain Through ACL plugin +| | ... | ${dut_node} | ${acl_name_mixed} | ${acl_settings} +| | And Honeycomb Assigns plugin-acl Chain To Interface +| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_mixed} | ingress +| | Then Send TCP or UDP packet and verify received packet | ${tg_node} +| | ... | ${src_ip} | ${dst_ip} +| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} +| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} +| | ... | TCP | ${src_port} | ${dst_port} +| | Then Send TCP or UDP packet and verify received packet | ${tg_node} +| | ... | ${classify_src_ip} | ${classify_dst_ip} +| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} +| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} +| | ... | TCP | ${src_port} | ${dst_port} +| | And Run Keyword And Expect Error | TCP/UDP Rx timeout +| | ... | Send TCP or UDP packet and verify received packet | ${tg_node} +| | ... | ${classify_src_ip} | ${classify_dst_ip} +| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} +| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} +| | ... | TCP | ${classify_src_port} | ${classify_dst_port} + +| TC06: ACL ICMP packet filtering - bridged +| | [Documentation] +| | ... | [Top] TG=DUT1=TG. +| | ... | [Enc] Eth-IPv4-ICMP. +| | ... | [Cfg] (Using Honeycomb API) On DUT1 bridge both interfaces to TG\ +| | ... | and configure a ICMP protocol filtering by ICMP type and code. +| | ... | [Ver] Send ICMP packets from one TG interface\ +| | ... | to the other, using different codes and types. Receive all packets\ +| | ... | except those with types and codes in the filtered ranges. +| | ... +| | [Teardown] | Bridged ACL test teardown +| | ... +| | Given Setup interfaces and bridge domain for plugin-acl test +| | ... | icmp | ${acl_name_icmp} +| | When Honeycomb Creates ACL Chain Through ACL plugin +| | ... | ${dut_node} | ${acl_name_icmp} | ${acl_settings} +| | And Honeycomb Assigns plugin-acl Chain To Interface +| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_icmp} | ingress +| | Then Send ICMP packet with type and code and verify received packet +| | ... | ${tg_node} +| | ... | ${src_ip} | ${dst_ip} +| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} +| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} +| | ... | ${icmp_type} | ${icmp_code} +| | Then Send ICMP packet with type and code and verify received packet +| | ... | ${tg_node} +| | ... | ${src_ip} | ${dst_ip} +| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} +| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} +| | ... | ${classify_type} | ${icmp_code} +| | And Run Keyword And Expect Error | ICMP echo Rx timeout +| | ... | Send ICMP packet with type and code and verify received packet +| | ... | ${tg_node} +| | ... | ${src_ip} | ${dst_ip} +| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} +| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} +| | ... | ${classify_type} | ${classify_code} + +| TC07: ACL ICMPv6 packet filtering - bridged +| | [Documentation] +| | ... | [Top] TG=DUT1=TG. +| | ... | [Enc] Eth-IPv6-ICMP. +| | ... | [Cfg] (Using Honeycomb API) On DUT1 bridge both interfaces to TG\ +| | ... | and configure a ICMPv6 protocol filtering by ICMPv6 type and code. +| | ... | [Ver] Send ICMPv6 packets from one TG interface\ +| | ... | to the other, using different codes and types. Receive all packets\ +| | ... | except those with the filtered type and code. +| | ... +| | [Teardown] | Bridged ACL test teardown +| | ... +| | Given Setup interfaces and bridge domain for plugin-acl test +| | ... | icmpv6 | ${acl_name_icmpv6} +| | When Honeycomb Creates ACL Chain Through ACL plugin +| | ... | ${dut_node} | ${acl_name_icmpv6} | ${acl_settings} +| | And Honeycomb Assigns plugin-acl Chain To Interface +| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_icmpv6} | ingress +| | Then Send ICMP packet with type and code and verify received packet +| | ... | ${tg_node} +| | ... | ${src_ip} | ${dst_ip} +| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} +| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} +| | ... | ${icmp_type} | ${icmp_code} +| | Then Send ICMP packet with type and code and verify received packet +| | ... | ${tg_node} +| | ... | ${src_ip} | ${dst_ip} +| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} +| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} +| | ... | ${classify_type} | ${icmp_code} +| | And Run Keyword And Expect Error | ICMP echo Rx timeout +| | ... | Send ICMP packet with type and code and verify received packet +| | ... | ${tg_node} +| | ... | ${src_ip} | ${dst_ip} +| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} +| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} +| | ... | ${classify_type} | ${classify_code} + +| TC08: ACL reflexive IPv4 filtering through plugin-acl node - bridged +| | [Documentation] +| | ... | [Top] TG=DUT1=TG. +| | ... | [Enc] Eth-IPv4-TCP. +| | ... | [Cfg] (Using Honeycomb API) On DUT1 bridge both interfaces to TG,\ +| | ... | configure a "drop all" ACL on ingress and reflexive ACL on egress. +| | ... | [Ver] Send a simple TCP packet to VPP interface 1 and do not receive\ +| | ... | it back. Then send the packet with reversed src/dst IP address\ +| | ... | to VPP interface 2 and receive it from interface 1(this should create\ +| | ... | a reflexive "permit" rule) Finally, send the original packet again\ +| | ... | and receive it from interface 2. +| | ... +# CSIT-863: running ODL and HC on single node may cause out of memory errors +| | [Tags] | HC_REST_ONLY +| | ... +| | [Teardown] | Bridged ACL test teardown +| | ... +| | Given Setup Interfaces And Bridge Domain For plugin-acl Test +| | ... | reflex | ${acl_name_reflex} +| | When Honeycomb Creates ACL Chain Through ACL plugin +| | ... | ${dut_node} | ${acl_name_reflex} | ${acl_settings} +| | And Honeycomb Assigns plugin-acl Chain To Interface +| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_reflex} | egress +| | And Import Variables | resources/test_data/honeycomb/plugin_acl.py +| | ... | block_all | block_all +| | When Honeycomb Creates ACL Chain Through ACL plugin +| | ... | ${dut_node} | block_all | ${acl_settings} +| | And Honeycomb Assigns plugin-acl Chain To Interface +| | ... | ${dut_node} | ${dut_to_tg_if1} | block_all | ingress +| | And Run Keyword And Expect Error | TCP/UDP Rx timeout +| | ... | Send TCP or UDP packet and verify received packet | ${tg_node} +| | ... | ${classify_src} | ${classify_dst} +| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} +| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} +| | ... | TCP | ${src_port} | ${dst_port} +| | And Send TCP or UDP packet and verify received packet | ${tg_node} +| | ... | ${classify_dst} | ${classify_src} +| | ... | ${tg_to_dut_if2} | ${tg_to_dut_if2_mac} +| | ... | ${tg_to_dut_if1} | ${dut_to_tg_if2_mac} +| | ... | TCP | ${dst_port} | ${src_port} +| | And Send TCP or UDP packet and verify received packet | ${tg_node} +| | ... | ${classify_src} | ${classify_dst} +| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} +| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} +| | ... | TCP | ${src_port} | ${dst_port} + +# Routing section +# =============== + +| TC09: ACL IPv4 filtering through plugin-acl node - routed +| | [Documentation] +| | ... | [Top] TG=DUT1=TG. +| | ... | [Enc] Eth-IPv4-TCP. +| | ... | [Cfg] (Using Honeycomb API) On DUT1 set IPv4 addresses on both\ +| | ... | interfaces to TG, add ARP entry and routes, and configure L3 IPv4 ACL\ +| | ... | on ingress interface with src/dst IP and protocol. +| | ... | [Ver] Send simple TCP and UDP packets from one TG interface\ +| | ... | to the other, using different IPv4 IPs. Receive all packets except\ +| | ... | those with IPs in the filtered ranges and UDP protocol payload. +| | ... +# CSIT-863: running ODL and HC on single node may cause out of memory errors +| | [Tags] | HC_REST_ONLY +| | ... +| | [Teardown] | Routed ACL test teardown - ipv4 +| | ... +| | Given Setup Interface IPs And Routes For IPv4 plugin-acl Test +| | ... | l3_ip4 | ${acl_name_l3_ip4} +| | When Honeycomb Creates ACL Chain Through ACL plugin +| | ... | ${dut_node} | ${acl_name_l3_ip4} | ${acl_settings} +| | And Honeycomb Assigns plugin-acl Chain To Interface +| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_l3_ip4} | ingress +| | Then Send TCP or UDP packet and verify received packet | ${tg_node} +| | ... | ${src_ip} | ${dst_ip} +| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} +| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} +| | ... | UDP | ${src_port} | ${dst_port} +| | And Send TCP or UDP packet and verify received packet | ${tg_node} +| | ... | ${classify_src} | ${classify_dst} +| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} +| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} +| | ... | TCP | ${src_port} | ${dst_port} +| | And Run Keyword And Expect Error | TCP/UDP Rx timeout +| | ... | Send TCP or UDP packet and verify received packet | ${tg_node} +| | ... | ${classify_src} | ${classify_dst} +| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} +| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} +| | ... | UDP | ${src_port} | ${dst_port} + +| TC10: ACL IPv6 filtering through plugin-acl node - routed +| | [Documentation] +| | ... | [Top] TG=DUT1=TG. +| | ... | [Enc] Eth-IPv6-TCP. +| | ... | [Cfg] (Using Honeycomb API) On DUT1 set IPv6 addresses on both\ +| | ... | interfaces to TG, add IP neighbor entry and routes, and configure\ +| | ... | L3 IPv6 ACL on ingress interface with src/dst IP and next-header. +| | ... | [Ver] Send simple TCP and UDP packets from one TG interface\ +| | ... | to the other, using different IPv6 IPs. Receive all packets except\ +| | ... | those with IPs in the filtered ranges and UDP protocol payload. +| | ... +# CSIT-863: running ODL and HC on single node may cause out of memory errors +| | [Tags] | HC_REST_ONLY +| | ... +| | [Teardown] | Routed ACL test teardown - ipv6 +| | ... +| | Given Configure path in 2-node circular topology +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} +| | And Import Variables | resources/test_data/honeycomb/plugin_acl.py +| | ... | L3_IP6 | ${acl_name_l3_ip6} +| | And Honeycomb configures interface state +| | ... | ${dut_node} | ${dut_to_tg_if1} | up +| | And Honeycomb configures interface state +| | ... | ${dut_node} | ${dut_to_tg_if2} | up +| | And Honeycomb sets interface IPv6 address | ${dut_node} +| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip} | ${prefix_length} +| | And Honeycomb sets interface IPv6 address | ${dut_node} +| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip} | ${prefix_length} +| | And VPP RA suppress link layer | ${dut_node} | ${dut_to_tg_if2} +| | And Honeycomb adds interface IPv6 neighbor +| | ... | ${node} | ${dut_to_tg_if2} | ${gateway} | ${tg_to_dut_if2_mac} +| | And VPP Route Add | ${node} | ${dst_net} | ${prefix_length} +| | ... | ${gateway} | interface=${dut_to_tg_if2} | use_sw_index=False +| | And VPP Route Add | ${node} | ${classify_dst_net} | ${prefix_length} +| | ... | ${gateway} | interface=${dut_to_tg_if2} | use_sw_index=False +| | When Honeycomb Creates ACL Chain Through ACL plugin +| | ... | ${dut_node} | ${acl_name_l3_ip6} | ${acl_settings} +| | And Honeycomb Assigns plugin-acl Chain To Interface +| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_l3_ip6} | ingress +| | Then Send TCP or UDP packet and verify received packet | ${tg_node} +| | ... | ${src_ip} | ${dst_ip} +| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} +| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} +| | ... | UDP | ${src_port} | ${dst_port} +| | And Send TCP or UDP packet and verify received packet | ${tg_node} +| | ... | ${classify_src} | ${classify_dst} +| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} +| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} +| | ... | TCP | ${src_port} | ${dst_port} +| | And Run Keyword And Expect Error | TCP/UDP Rx timeout +| | ... | Send TCP or UDP packet and verify received packet | ${tg_node} +| | ... | ${classify_src} | ${classify_dst} +| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} +| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} +| | ... | UDP | ${src_port} | ${dst_port} + +| TC11: ACL port filtering through plugin-acl node - routed +| | [Documentation] +| | ... | [Top] TG=DUT1=TG. +| | ... | [Enc] Eth-IPv4-TCP. +| | ... | [Cfg] (Using Honeycomb API) On DUT1 set IPv4 addresses on both\ +| | ... | interfaces to TG, add ARP entry and routes, and configure L4 port ACL\ +| | ... | on ingress interface with src/dst port ranges. +| | ... | [Ver] Send simple TCP and UDP packets from one TG interface\ +| | ... | to the other, using different ports. Receive all packets except\ +| | ... | those with ports in the filtered ranges. +| | ... +| | [Teardown] | Routed ACL test teardown - ipv4 +| | ... +# CSIT-863: running ODL and HC on single node may cause out of memory errors +| | [Tags] | HC_REST_ONLY +| | ... +| | Given Setup Interface IPs And Routes For IPv4 plugin-acl Test +| | ... | L4 | ${acl_name_l4} +| | When Honeycomb Creates ACL Chain Through ACL plugin +| | ... | ${dut_node} | ${acl_name_l4} | ${acl_settings} +| | And Honeycomb Assigns plugin-acl Chain To Interface +| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_l4} | ingress +| | Then Send TCP or UDP packet and verify received packet | ${tg_node} +| | ... | ${src_ip} | ${dst_ip} +| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} +| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} +| | ... | TCP | ${src_port} | ${dst_port} +| | And Run Keyword And Expect Error | TCP/UDP Rx timeout +| | ... | Send TCP or UDP packet and verify received packet | ${tg_node} +| | ... | ${src_ip} | ${dst_ip} +| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} +| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} +| | ... | TCP | ${classify_src} | ${classify_dst} +| | And Run Keyword And Expect Error | TCP/UDP Rx timeout +| | ... | Send TCP or UDP packet and verify received packet | ${tg_node} +| | ... | ${src_ip} | ${dst_ip} +| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} +| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} +| | ... | TCP | ${classify_src+5} | ${classify_dst+5} + +| TC12: ACL filtering with IPv4 address and TCP port in one rule - routed +| | [Documentation] +| | ... | [Top] TG=DUT1=TG. +| | ... | [Enc] Eth-IPv4-TCP. +| | ... | [Cfg] (Using Honeycomb API) On DUT1 set IPv4 addresses on both\ +| | ... | interfaces to TG, add ARP entry and routes and configure a mixed +| | ... | rule with src/dst IP, TCP protocol and port ranges. +| | ... | [Ver] Send simple TCP packets from one TG interface to the other,\ +| | ... | using IPs and ports. Receive all packets except those with\ +| | ... | both IPs and ports in the filtered ranges. +| | ... +| | [Teardown] | Routed ACL test teardown - ipv4 +| | ... +# CSIT-863: running ODL and HC on single node may cause out of memory errors +| | [Tags] | HC_REST_ONLY +| | ... +| | Given Setup Interface IPs And Routes For IPv4 plugin-acl Test +| | ... | mixed | ${acl_name_mixed} +| | When Honeycomb Creates ACL Chain Through ACL plugin +| | ... | ${dut_node} | ${acl_name_mixed} | ${acl_settings} +| | And Honeycomb Assigns plugin-acl Chain To Interface +| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_mixed} | ingress +| | Then Send TCP or UDP packet and verify received packet | ${tg_node} +| | ... | ${src_ip} | ${dst_ip} +| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} +| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} +| | ... | TCP | ${src_port} | ${dst_port} +| | Then Send TCP or UDP packet and verify received packet | ${tg_node} +| | ... | ${classify_src_ip} | ${classify_dst_ip} +| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} +| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} +| | ... | TCP | ${src_port} | ${dst_port} +| | And Run Keyword And Expect Error | TCP/UDP Rx timeout +| | ... | Send TCP or UDP packet and verify received packet | ${tg_node} +| | ... | ${classify_src_ip} | ${classify_dst_ip} +| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} +| | ... | ${tg_to_dut_if2} | ${dst_mac} +| | ... | TCP | ${classify_src_port} | ${classify_dst_port} + +| TC13: ACL ICMP packet filtering - routed +| | [Documentation] +| | ... | [Top] TG=DUT1=TG. +| | ... | [Enc] Eth-IPv4-TCP. +| | ... | [Cfg] (Using Honeycomb API) On DUT1 set IPv4 addresses on both\ +| | ... | interfaces to TG, add ARP entry and routes, and configure ICMP ACL\ +| | ... | on ingress interface with ICMP type and code. +| | ... | [Ver] Send ICMP packets from one TG interface\ +| | ... | to the other, using different codes and types. Receive all packets\ +| | ... | except those with the filtered type and code. +| | ... +| | [Teardown] | Routed ACL test teardown - ipv4 +| | ... +# CSIT-863: running ODL and HC on single node may cause out of memory errors +| | [Tags] | HC_REST_ONLY +| | ... +| | Given Setup Interface IPs And Routes For IPv4 plugin-acl Test +| | ... | icmp | ${acl_name_icmp} +| | When Honeycomb Creates ACL Chain Through ACL plugin +| | ... | ${dut_node} | ${acl_name_icmp} | ${acl_settings} +| | And Honeycomb Assigns plugin-acl Chain To Interface +| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_icmp} | ingress +| | Then Send ICMP packet with type and code and verify received packet +| | ... | ${tg_node} +| | ... | ${src_ip} | ${dst_ip} +| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} +| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} +| | ... | ${icmp_type} | ${icmp_code} +| | Then Send ICMP packet with type and code and verify received packet +| | ... | ${tg_node} +| | ... | ${src_ip} | ${dst_ip} +| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} +| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} +| | ... | ${classify_type} | ${icmp_code} +| | And Run Keyword And Expect Error | ICMP echo Rx timeout +| | ... | Send ICMP packet with type and code and verify received packet +| | ... | ${tg_node} +| | ... | ${src_ip} | ${dst_ip} +| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} +| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} +| | ... | ${classify_type} | ${classify_code} + +| TC14: ACL ICMPv6 packet filtering - routed +| | [Documentation] +| | ... | [Top] TG=DUT1=TG. +| | ... | [Enc] Eth-IPv4-TCP. +| | ... | [Cfg] (Using Honeycomb API) On DUT1 set IPv6 addresses on both\ +| | ... | interfaces to TG, add ARP entry and routes, and configure ICMP ACL\ +| | ... | on ingress interface with ICMPv6 type and code. +| | ... | [Ver] Send ICMPv6 packets from one TG interface\ +| | ... | to the other, using different codes and types. Receive all packets\ +| | ... | except those with the filtered type and code. +| | ... +# CSIT-863: running ODL and HC on single node may cause out of memory errors +| | [Tags] | HC_REST_ONLY +| | ... +| | [Teardown] | Routed ACL test teardown - ipv6 +| | ... +| | Given Configure path in 2-node circular topology +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} +| | And Import Variables | resources/test_data/honeycomb/plugin_acl.py +| | ... | icmpv6 | ${acl_name_icmpv6} +| | And Honeycomb configures interface state +| | ... | ${dut_node} | ${dut_to_tg_if1} | up +| | And Honeycomb configures interface state +| | ... | ${dut_node} | ${dut_to_tg_if2} | up +| | And Honeycomb sets interface IPv6 address | ${dut_node} +| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip} | ${prefix_length} +| | And Honeycomb sets interface IPv6 address | ${dut_node} +| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip} | ${prefix_length} +| | And Honeycomb adds interface IPv6 neighbor +| | ... | ${node} | ${dut_to_tg_if2} | ${gateway} | ${tg_to_dut_if2_mac} +| | And VPP RA suppress link layer | ${dut_node} | ${dut_to_tg_if2} +| | And VPP Route Add | ${node} | ${dst_net} | ${prefix_length} +| | ... | ${gateway} | interface=${dut_to_tg_if2} | use_sw_index=False +| | And VPP Route Add | ${node} | ${classify_dst_net} | ${prefix_length} +| | ... | ${gateway} | interface=${dut_to_tg_if2} | use_sw_index=False +| | When Honeycomb Creates ACL Chain Through ACL plugin +| | ... | ${dut_node} | ${acl_name_icmpv6} | ${acl_settings} +| | And Honeycomb Assigns plugin-acl Chain To Interface +| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_icmpv6} | ingress +| | Then Send ICMP packet with type and code and verify received packet +| | ... | ${tg_node} +| | ... | ${src_ip} | ${dst_ip} +| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} +| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} +| | ... | ${icmp_type} | ${icmp_code} +| | Then Send ICMP packet with type and code and verify received packet +| | ... | ${tg_node} +| | ... | ${src_ip} | ${dst_ip} +| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} +| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} +| | ... | ${classify_type} | ${icmp_code} +| | And Run Keyword And Expect Error | ICMP echo Rx timeout +| | ... | Send ICMP packet with type and code and verify received packet +| | ... | ${tg_node} +| | ... | ${src_ip} | ${dst_ip} +| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} +| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} +| | ... | ${classify_type} | ${classify_code} + +| TC15: ACL reflexive IPv4 filtering through plugin-acl node - routed +| | [Documentation] +| | ... | [Top] TG=DUT1=TG. +| | ... | [Enc] Eth-IPv4-TCP. +| | ... | [Cfg] (Using Honeycomb API) On DUT1 set IPv4 addresses on both\ +| | ... | interfaces to TG, add ARP entries and routes,\ +| | ... | configure a "drop all" ACL on ingress and reflexive ACL on egress. +| | ... | [Ver] Send a simple TCP packet to VPP interface 1 and do not receive\ +| | ... | it back. Then send the packet with reversed src/dst IP address\ +| | ... | to VPP interface 2 and receive it from interface 1(this should create\ +| | ... | a reflexive "permit" rule) Finally, send the original packet again\ +| | ... | and receive it from interface 2. +| | ... +# CSIT-863: running ODL and HC on single node may cause out of memory errors +| | [Tags] | HC_REST_ONLY +| | ... +| | [Teardown] | Routed ACL test teardown - ipv4 +| | ... +| | Given Setup Interface IPs And Routes For IPv4 plugin-acl Test +| | ... | reflex | ${acl_name_reflex} +| | And Add ARP on DUT +| | ... | ${node} | ${dut_to_tg_if1} | ${gateway2} | ${tg_to_dut_if1_mac} +| | And VPP Route Add +| | ... | ${node} | ${src_net} | ${prefix_length} | ${gateway2} +| | ... | interface=${dut_to_tg_if1} | use_sw_index=False +| | And VPP Route Add +| | ... | ${node} | ${classify_src_net} | ${prefix_length} | ${gateway2} +| | ... | interface=${dut_to_tg_if1} | use_sw_index=False +| | When Honeycomb Creates ACL Chain Through ACL plugin +| | ... | ${dut_node} | ${acl_name_reflex} | ${acl_settings} +| | And Honeycomb Assigns plugin-acl Chain To Interface +| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_reflex} | egress +| | And Import Variables | resources/test_data/honeycomb/plugin_acl.py +| | ... | block_all | block_all +| | When Honeycomb Creates ACL Chain Through ACL plugin +| | ... | ${dut_node} | block_all | ${acl_settings} +| | And Honeycomb Assigns plugin-acl Chain To Interface +| | ... | ${dut_node} | ${dut_to_tg_if1} | block_all | ingress +| | And Run Keyword And Expect Error | TCP/UDP Rx timeout +| | ... | Send TCP or UDP packet and verify received packet | ${tg_node} +| | ... | ${classify_src} | ${classify_dst} +| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} +| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} +| | ... | TCP | ${src_port} | ${dst_port} +| | And Send TCP or UDP packet and verify received packet | ${tg_node} +| | ... | ${classify_dst} | ${classify_src} +| | ... | ${tg_to_dut_if2} | ${tg_to_dut_if2_mac} +| | ... | ${tg_to_dut_if1} | ${dut_to_tg_if2_mac} +| | ... | TCP | ${dst_port} | ${src_port} +| | And Send TCP or UDP packet and verify received packet | ${tg_node} +| | ... | ${classify_src} | ${classify_dst} +| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} +| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac} +| | ... | TCP | ${src_port} | ${dst_port} + +*** Keywords *** +| Setup interface IPs and routes for IPv4 plugin-acl test +| | [Documentation] | Import test variables, set interfaces up, +| | ... | configure IPv4 addresses, add neighbor entry and routes. +| | ... +| | [Arguments] | ${test_data_id} | ${acl_name} +| | ... +| | Configure path in 2-node circular topology +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} +| | Import Variables | resources/test_data/honeycomb/plugin_acl.py +| | ... | ${test_data_id} | ${acl_name} +| | Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if1} | up +| | Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if2} | up +| | Honeycomb sets interface IPv4 address with prefix | ${dut_node} +| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip} | ${prefix_length} +| | Honeycomb sets interface IPv4 address with prefix | ${dut_node} +| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip} | ${prefix_length} +| | And Honeycomb adds interface IPv4 neighbor +| | ... | ${node} | ${dut_to_tg_if2} | ${gateway} | ${tg_to_dut_if2_mac} +| | VPP Route Add +| | ... | ${node} | ${dst_net} | ${prefix_length} | ${gateway} +| | ... | interface=${dut_to_tg_if2} | use_sw_index=False +| | VPP Route Add +| | ... | ${node} | ${classify_dst_net} | ${prefix_length} | ${gateway} +| | ... | interface=${dut_to_tg_if2} | use_sw_index=False + +| Setup interfaces and bridge domain for plugin-acl test +| | [Documentation] | Import test variables, set interfaces up and bridge them. +| | ... +| | [Arguments] | ${test_data_id} | ${acl_name} +| | ... +| | Configure path in 2-node circular topology +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} +| | Import Variables | resources/test_data/honeycomb/plugin_acl.py +| | ... | ${test_data_id} | ${acl_name} +| | Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if1} | up +| | Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if2} | up +| | Honeycomb Creates first L2 Bridge Domain +| | ... | ${dut_node} | ${bd_name} | ${bd_settings} +| | Honeycomb Adds Interfaces To Bridge Domain +| | ... | ${dut_node} | ${dut_to_tg_if1} | ${dut_to_tg_if2} +| | ... | ${bd_name} | ${bd_if_settings} + +| Bridged ACL test teardown +| | [Documentation] | Log packet trace and ACL settings, +| | ... | then clean up bridge domains. +| | ... +| | Show Packet Trace on All DUTs | ${nodes} +| | Read plugin-ACL configuration from VAT | ${node} +| | Clear plugin-ACL configuration | ${node} | ${dut_to_tg_if1} +| | Honeycomb Removes All Bridge Domains +| | ... | ${node} | ${dut_to_tg_if1} | ${dut_to_tg_if2} + +| Routed ACL test teardown - ipv4 +| | [Documentation] | Log packet trace and ACL settings, +| | ... | then clean up IPv4 addresses and neighbors. +| | ... +| | Show Packet Trace on All DUTs | ${nodes} +| | Read plugin-ACL configuration from VAT | ${node} +| | Clear plugin-ACL configuration | ${node} | ${dut_to_tg_if1} +| | Honeycomb removes interface IPv4 addresses | ${node} | ${dut_to_tg_if1} +| | Honeycomb clears all interface IPv4 neighbors | ${node} | ${dut_to_tg_if1} + +| Routed ACL test teardown - ipv6 +| | [Documentation] | Log packet trace and ACL settings, +| | ... | then clean up IPv6 addresses and neighbors. +| | ... +| | Show Packet Trace on All DUTs | ${nodes} +| | Clear plugin-ACL configuration | ${node} | ${dut_to_tg_if1} +| | Read plugin-ACL configuration from VAT | ${node} +| | Honeycomb removes interface IPv6 addresses | ${node} | ${dut_to_tg_if1} +| | Honeycomb clears all interface IPv6 neighbors | ${node} | ${dut_to_tg_if1} |