diff options
Diffstat (limited to 'tests/honeycomb/func/mgmt-cfg-spanrx-apihc-apivat-func.robot')
| -rw-r--r-- | tests/honeycomb/func/mgmt-cfg-spanrx-apihc-apivat-func.robot | 256 |
1 files changed, 256 insertions, 0 deletions
diff --git a/tests/honeycomb/func/mgmt-cfg-spanrx-apihc-apivat-func.robot b/tests/honeycomb/func/mgmt-cfg-spanrx-apihc-apivat-func.robot new file mode 100644 index 0000000000..ccb674fbd7 --- /dev/null +++ b/tests/honeycomb/func/mgmt-cfg-spanrx-apihc-apivat-func.robot @@ -0,0 +1,256 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/honeycomb/port_mirroring.robot +| Resource | resources/libraries/robot/honeycomb/interfaces.robot +| Resource | resources/libraries/robot/honeycomb/honeycomb.robot +| Resource | resources/libraries/robot/honeycomb/sub_interface.robot +| Resource | resources/libraries/robot/shared/testing_path.robot +| Resource | resources/libraries/robot/telemetry/span.robot +| Variables | resources/test_data/honeycomb/span.py +| ... | ${node['interfaces']['port1']['name']} +| ... | ${node['interfaces']['port3']['name']} +| ... | local0 +| Variables | resources/test_data/honeycomb/sub_interfaces.py +| ... +| Force Tags | HC_FUNC +| ... +| Suite Setup | Run Keywords +| ... | Set Up Honeycomb Functional Test Suite | ${node} | AND +| ... | Add Interface local0 To Topology | ${node} +| ... +| Suite Teardown | Tear Down Honeycomb Functional Test Suite | ${node} +| ... +| Documentation | *Honeycomb port mirroring test suite.* + +*** Test Cases *** +| TC01: Honeycomb can configure SPAN on an interface - receive +| | [Documentation] | Honeycomb configures SPAN on interface and verifies +| | ... | against VPP SPAN dump in state receive. +| | ... +| | When Honeycomb configures SPAN on interface +| | ... | ${node} | ${interface1} | ${settings_receive} +| | Then Interface SPAN Operational Data from Honeycomb should be +| | ... | ${node} | ${interface1} | ${settings_receive} + +| TC02: Honeycomb can configure SPAN on an interface - transmit +| | [Documentation] | Honeycomb configures SPAN on interface and verifies +| | ... | against VPP SPAN dump in state transmit. +| | ... +| | When Honeycomb configures SPAN on interface +| | ... | ${node} | ${interface1} | ${settings_transmit} +| | Then Interface SPAN Operational Data from Honeycomb should be +| | ... | ${node} | ${interface1} | ${settings_transmit} + +| TC03: Honeycomb can configure SPAN on an interface - both +| | [Documentation] | Honeycomb configures SPAN on interface and verifies +| | ... | against VPP SPAN dump in state both. +| | ... +| | When Honeycomb configures SPAN on interface +| | ... | ${node} | ${interface1} | ${settings_both} +| | Then Interface SPAN Operational Data from Honeycomb should be +| | ... | ${node} | ${interface1} | ${settings_both} + +| TC04: Honeycomb can configure SPAN on an interface with two source interfaces +| | [Documentation] | Honeycomb configures SPAN on interface and verifies +| | ... | against VPP SPAN dump in state both. +| | ... +| | When Honeycomb configures SPAN on interface +| | ... | ${node} | ${interface1} | ${settings_both} | ${settings_if2} +| | Then Interface SPAN Operational Data from Honeycomb should be +| | ... | ${node} | ${interface1} | ${settings_both} | ${settings_if2} + +| TC05: Honeycomb can disable SPAN on interface +| | [Documentation] | Honeycomb removes existing SPAN configuration +| | ... | from interface. +| | ... +| | Given Interface SPAN Operational Data from Honeycomb should be +| | ... | ${node} | ${interface1} | ${settings_both} | ${settings_if2} +| | When Honeycomb removes interface SPAN configuration +| | ... | ${node} | ${interface1} +| | Then Interface SPAN Operational Data from Honeycomb should be empty +| | ... | ${node} | ${interface1} + +| TC06: Honeycomb can configure SPAN with two destination interfaces from the same source +| | [Documentation] | Honeycomb configures SPAN on two interfaces and verifies +| | ... | against VPP SPAN dump. +| | ... +| | [Teardown] | Run Keywords +| | ... | Honeycomb removes interface SPAN configuration +| | ... | ${node} | ${interface1} | AND +| | ... | Honeycomb removes interface SPAN configuration +| | ... | ${node} | ${interface2} +| | ... +| | When Honeycomb configures SPAN on interface +| | ... | ${node} | ${interface1} | ${settings_if2} +| | And Honeycomb configures SPAN on interface +| | ... | ${node} | ${interface2} | ${settings_if2} +| | Then Interface SPAN Operational Data from Honeycomb should be +| | ... | ${node} | ${interface1} | ${settings_if2} +| | Then Interface SPAN Operational Data from Honeycomb should be +| | ... | ${node} | ${interface2} | ${settings_if2} + +| TC07: DUT mirrors IPv4 packets from one interface to another +| | [Documentation] +| | ... | [Top] TG=DUT1 +| | ... | [Cfg] (using Honeycomb) On DUT1 configure IPv4 address and set SPAN\ +| | ... | mirroring from one DUT interface to the other. +| | ... | [Ver] Make TG send an ARP packet to DUT through one interface,\ +| | ... | then receive a copy of sent packet and of DUT's ARP reply\ +| | ... | on the second interface. +| | ... +| | [Teardown] | Run Keywords +| | ... | Show Packet Trace on All DUTs | ${nodes} | AND +| | ... | Honeycomb clears all interface IPv4 neighbors +| | ... | ${dut_node} | ${dut_to_tg_if1} | AND +| | ... | Honeycomb removes interface IPv4 addresses +| | ... | ${dut_node} | ${dut_to_tg_if1} | AND +| | ... | Honeycomb removes interface SPAN configuration +| | ... | ${node} | ${dut_to_tg_if2} +| | ... +| | Given Configure path in 2-node circular topology +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} +| | And Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if1} +| | ... | up +| | And Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if2} +| | ... | up +| | And Honeycomb sets interface IPv4 address with prefix | ${dut_node} +| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip} | ${prefix} +| | And Honeycomb adds interface IPv4 neighbor | ${dut_node} | ${dut_to_tg_if1} +| | ... | ${tg_to_dut_if1_ip} | ${tg_to_dut_if1_mac} +| | ${settings_5}= | create dictionary | state=both +| | ... | iface-ref=${dut_to_tg_if1} +| | And All Vpp Interfaces Ready Wait | ${nodes} +| | When Honeycomb configures SPAN on interface +| | ... | ${node} | ${dut_to_tg_if2} | ${settings_5} +| | Then Send Packet And Check Received Copies | ${tg_node} +| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} +| | ... | ${dut_to_tg_if1_mac} | ${tg_to_dut_if2} +| | ... | ${tg_to_dut_if1_ip} | ${dut_to_tg_if1_ip} | ICMP + +| TC08: Honeycomb can configure SPAN on a sub-interface - receive +| | [Documentation] | Honeycomb configures SPAN on sub-interface and verifies +| | ... | against VPP SPAN dump in state receive. +| | ... +| | Given Honeycomb creates sub-interface | ${node} | ${interface1} +| | ... | ${sub_if_1_match} | ${sub_if_1_tags} | ${sub_if_1_settings} +| | When Honeycomb Configures SPAN on sub-interface +| | ... | ${node} | ${interface1} | ${1} | ${settings_receive} +| | Then sub-Interface SPAN Operational Data from Honeycomb should be +| | ... | ${node} | ${interface1} | ${1} | ${settings_receive} + +| TC09: Honeycomb can configure SPAN on a sub-interface - transmit +| | [Documentation] | Honeycomb configures SPAN on sub-interface and verifies +| | ... | against VPP SPAN dump in state transmit. +| | ... +| | Given Sub-interface state from Honeycomb should be +| | ... | ${node} | ${interface1} | ${1} | down | up +| | When Honeycomb Configures SPAN on sub-interface +| | ... | ${node} | ${interface1} | ${1} | ${settings_transmit} +| | Then sub-Interface SPAN Operational Data from Honeycomb should be +| | ... | ${node} | ${interface1} | ${1} | ${settings_transmit} + +| TC10: Honeycomb can configure SPAN on a sub-interface - both +| | [Documentation] | Honeycomb configures SPAN on sub-interface and verifies +| | ... | against VPP SPAN dump in state both. +| | ... +| | Given Sub-interface state from Honeycomb should be +| | ... | ${node} | ${interface1} | ${1} | down | up +| | When Honeycomb Configures SPAN on sub-interface +| | ... | ${node} | ${interface1} | ${1} | ${settings_both} +| | Then sub-Interface SPAN Operational Data from Honeycomb should be +| | ... | ${node} | ${interface1} | ${1} | ${settings_both} + +| TC11: Honeycomb can configure SPAN on a sub-interface with two source interfaces +| | [Documentation] | Honeycomb configures SPAN on sub-interface and verifies +| | ... | against VPP SPAN dump in state both. +| | ... +| | Given Sub-interface state from Honeycomb should be +| | ... | ${node} | ${interface1} | ${1} | down | up +| | When Honeycomb Configures SPAN on sub-interface +| | ... | ${node} | ${interface1} | ${1} | ${settings_both} | ${settings_if2} +| | Then sub-Interface SPAN Operational Data from Honeycomb should be +| | ... | ${node} | ${interface1} | ${1} | ${settings_both} | ${settings_if2} + +| TC12: Honeycomb can disable SPAN on interface +| | [Documentation] | Honeycomb removes existing SPAN configuration +| | ... | from sub-interface. +| | ... +| | Given Sub-interface state from Honeycomb should be +| | ... | ${node} | ${interface1} | ${1} | down | up +| | Given sub-Interface SPAN Operational Data from Honeycomb should be +| | ... | ${node} | ${interface1} | ${1} | ${settings_both} | ${settings_if2} +| | When Honeycomb removes sub-interface SPAN configuration +| | ... | ${node} | ${interface1} | ${1} +| | Then sub-Interface SPAN Operational Data from Honeycomb should be empty +| | ... | ${node} | ${interface1} | ${1} + +| TC13: Honeycomb can configure SPAN with two destination sub-interfaces from the same source +| | [Documentation] | Honeycomb configures SPAN on two sub-interfaces +| | ... | and verifies against VPP SPAN dump. +| | ... +| | [Teardown] | Run Keywords +| | ... | Honeycomb removes sub-interface SPAN configuration +| | ... | ${node} | ${interface1} | ${1} | AND +| | ... | Honeycomb removes sub-interface SPAN configuration +| | ... | ${node} | ${interface2} | ${1} +| | ... +| | Given Honeycomb creates sub-interface | ${node} | ${interface2} +| | ... | ${sub_if_2_match} | ${sub_if_2_tags} | ${sub_if_2_settings} +| | When Honeycomb Configures SPAN on sub-interface +| | ... | ${node} | ${interface1} | ${1} | ${settings_if2} +| | And Honeycomb Configures SPAN on sub-interface +| | ... | ${node} | ${interface2} | ${1} | ${settings_if2} +| | Then Sub-Interface SPAN Operational Data from Honeycomb should be +| | ... | ${node} | ${interface1} | ${1} | ${settings_if2} +| | Then Sub-Interface SPAN Operational Data from Honeycomb should be +| | ... | ${node} | ${interface2} | ${1} | ${settings_if2} + +| TC14: DUT mirrors IPv4 packets from an interface to a sub-interface +| | [Documentation] +| | ... | [Top] TG=DUT1 +| | ... | [Cfg] (using Honeycomb) On DUT1 configure IPv4 address and set SPAN\ +| | ... | mirroring from one DUT interface to a sub-interface on the other\ +| | ... | interface. +| | ... | [Ver] Make TG send an ARP packet to DUT through one interface,\ +| | ... | then receive a copy of sent packet and of DUT's ARP reply\ +| | ... | on the sub-interface. +| | ... +| | [Teardown] | Show Packet Trace on All DUTs | ${nodes} +| | ... +| | Given Configure path in 2-node circular topology +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} +| | And Honeycomb creates sub-interface | ${dut_node} | ${dut_to_tg_if1} +| | ... | ${sub_if_1_match} | ${sub_if_1_tags} | ${sub_if_1_settings} +| | And Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if1} +| | ... | up +| | And Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if2} +| | ... | up +| | And Honeycomb sets the sub-interface up +| | ... | ${dut_node} | ${dut_to_tg_if1} | ${1} +| | And Honeycomb sets interface IPv4 address with prefix | ${dut_node} +| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip} | ${prefix} +| | And And Honeycomb adds interface IPv4 neighbor +| | ... | ${dut_node} | ${dut_to_tg_if2} +| | ... | ${tg_to_dut_if2_ip} | ${tg_to_dut_if2_mac} +| | ${settings_5}= | create dictionary | state=both +| | ... | iface-ref=${dut_to_tg_if2} +| | And All Vpp Interfaces Ready Wait | ${nodes} +| | When Honeycomb Configures SPAN on sub-interface +| | ... | ${node} | ${dut_to_tg_if1} | ${1} | ${settings_5} +| | Then Send Packet And Check Received Copies | ${tg_node} +| | ... | ${tg_to_dut_if2} | ${tg_to_dut_if2_mac} +| | ... | ${dut_to_tg_if2_mac} | ${tg_to_dut_if1} +| | ... | ${tg_to_dut_if2_ip} | ${dut_to_tg_if2_ip} | ICMP |