diff options
Diffstat (limited to 'tests/honeycomb/func/mgmt-cfg-spanrx-apihc-apivat-func.robot')
| -rw-r--r-- | tests/honeycomb/func/mgmt-cfg-spanrx-apihc-apivat-func.robot | 256 |
1 files changed, 0 insertions, 256 deletions
diff --git a/tests/honeycomb/func/mgmt-cfg-spanrx-apihc-apivat-func.robot b/tests/honeycomb/func/mgmt-cfg-spanrx-apihc-apivat-func.robot deleted file mode 100644 index ccb674fbd7..0000000000 --- a/tests/honeycomb/func/mgmt-cfg-spanrx-apihc-apivat-func.robot +++ /dev/null @@ -1,256 +0,0 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/honeycomb/port_mirroring.robot -| Resource | resources/libraries/robot/honeycomb/interfaces.robot -| Resource | resources/libraries/robot/honeycomb/honeycomb.robot -| Resource | resources/libraries/robot/honeycomb/sub_interface.robot -| Resource | resources/libraries/robot/shared/testing_path.robot -| Resource | resources/libraries/robot/telemetry/span.robot -| Variables | resources/test_data/honeycomb/span.py -| ... | ${node['interfaces']['port1']['name']} -| ... | ${node['interfaces']['port3']['name']} -| ... | local0 -| Variables | resources/test_data/honeycomb/sub_interfaces.py -| ... -| Force Tags | HC_FUNC -| ... -| Suite Setup | Run Keywords -| ... | Set Up Honeycomb Functional Test Suite | ${node} | AND -| ... | Add Interface local0 To Topology | ${node} -| ... -| Suite Teardown | Tear Down Honeycomb Functional Test Suite | ${node} -| ... -| Documentation | *Honeycomb port mirroring test suite.* - -*** Test Cases *** -| TC01: Honeycomb can configure SPAN on an interface - receive -| | [Documentation] | Honeycomb configures SPAN on interface and verifies -| | ... | against VPP SPAN dump in state receive. -| | ... -| | When Honeycomb configures SPAN on interface -| | ... | ${node} | ${interface1} | ${settings_receive} -| | Then Interface SPAN Operational Data from Honeycomb should be -| | ... | ${node} | ${interface1} | ${settings_receive} - -| TC02: Honeycomb can configure SPAN on an interface - transmit -| | [Documentation] | Honeycomb configures SPAN on interface and verifies -| | ... | against VPP SPAN dump in state transmit. -| | ... -| | When Honeycomb configures SPAN on interface -| | ... | ${node} | ${interface1} | ${settings_transmit} -| | Then Interface SPAN Operational Data from Honeycomb should be -| | ... | ${node} | ${interface1} | ${settings_transmit} - -| TC03: Honeycomb can configure SPAN on an interface - both -| | [Documentation] | Honeycomb configures SPAN on interface and verifies -| | ... | against VPP SPAN dump in state both. -| | ... -| | When Honeycomb configures SPAN on interface -| | ... | ${node} | ${interface1} | ${settings_both} -| | Then Interface SPAN Operational Data from Honeycomb should be -| | ... | ${node} | ${interface1} | ${settings_both} - -| TC04: Honeycomb can configure SPAN on an interface with two source interfaces -| | [Documentation] | Honeycomb configures SPAN on interface and verifies -| | ... | against VPP SPAN dump in state both. -| | ... -| | When Honeycomb configures SPAN on interface -| | ... | ${node} | ${interface1} | ${settings_both} | ${settings_if2} -| | Then Interface SPAN Operational Data from Honeycomb should be -| | ... | ${node} | ${interface1} | ${settings_both} | ${settings_if2} - -| TC05: Honeycomb can disable SPAN on interface -| | [Documentation] | Honeycomb removes existing SPAN configuration -| | ... | from interface. -| | ... -| | Given Interface SPAN Operational Data from Honeycomb should be -| | ... | ${node} | ${interface1} | ${settings_both} | ${settings_if2} -| | When Honeycomb removes interface SPAN configuration -| | ... | ${node} | ${interface1} -| | Then Interface SPAN Operational Data from Honeycomb should be empty -| | ... | ${node} | ${interface1} - -| TC06: Honeycomb can configure SPAN with two destination interfaces from the same source -| | [Documentation] | Honeycomb configures SPAN on two interfaces and verifies -| | ... | against VPP SPAN dump. -| | ... -| | [Teardown] | Run Keywords -| | ... | Honeycomb removes interface SPAN configuration -| | ... | ${node} | ${interface1} | AND -| | ... | Honeycomb removes interface SPAN configuration -| | ... | ${node} | ${interface2} -| | ... -| | When Honeycomb configures SPAN on interface -| | ... | ${node} | ${interface1} | ${settings_if2} -| | And Honeycomb configures SPAN on interface -| | ... | ${node} | ${interface2} | ${settings_if2} -| | Then Interface SPAN Operational Data from Honeycomb should be -| | ... | ${node} | ${interface1} | ${settings_if2} -| | Then Interface SPAN Operational Data from Honeycomb should be -| | ... | ${node} | ${interface2} | ${settings_if2} - -| TC07: DUT mirrors IPv4 packets from one interface to another -| | [Documentation] -| | ... | [Top] TG=DUT1 -| | ... | [Cfg] (using Honeycomb) On DUT1 configure IPv4 address and set SPAN\ -| | ... | mirroring from one DUT interface to the other. -| | ... | [Ver] Make TG send an ARP packet to DUT through one interface,\ -| | ... | then receive a copy of sent packet and of DUT's ARP reply\ -| | ... | on the second interface. -| | ... -| | [Teardown] | Run Keywords -| | ... | Show Packet Trace on All DUTs | ${nodes} | AND -| | ... | Honeycomb clears all interface IPv4 neighbors -| | ... | ${dut_node} | ${dut_to_tg_if1} | AND -| | ... | Honeycomb removes interface IPv4 addresses -| | ... | ${dut_node} | ${dut_to_tg_if1} | AND -| | ... | Honeycomb removes interface SPAN configuration -| | ... | ${node} | ${dut_to_tg_if2} -| | ... -| | Given Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if1} -| | ... | up -| | And Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if2} -| | ... | up -| | And Honeycomb sets interface IPv4 address with prefix | ${dut_node} -| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip} | ${prefix} -| | And Honeycomb adds interface IPv4 neighbor | ${dut_node} | ${dut_to_tg_if1} -| | ... | ${tg_to_dut_if1_ip} | ${tg_to_dut_if1_mac} -| | ${settings_5}= | create dictionary | state=both -| | ... | iface-ref=${dut_to_tg_if1} -| | And All Vpp Interfaces Ready Wait | ${nodes} -| | When Honeycomb configures SPAN on interface -| | ... | ${node} | ${dut_to_tg_if2} | ${settings_5} -| | Then Send Packet And Check Received Copies | ${tg_node} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${dut_to_tg_if1_mac} | ${tg_to_dut_if2} -| | ... | ${tg_to_dut_if1_ip} | ${dut_to_tg_if1_ip} | ICMP - -| TC08: Honeycomb can configure SPAN on a sub-interface - receive -| | [Documentation] | Honeycomb configures SPAN on sub-interface and verifies -| | ... | against VPP SPAN dump in state receive. -| | ... -| | Given Honeycomb creates sub-interface | ${node} | ${interface1} -| | ... | ${sub_if_1_match} | ${sub_if_1_tags} | ${sub_if_1_settings} -| | When Honeycomb Configures SPAN on sub-interface -| | ... | ${node} | ${interface1} | ${1} | ${settings_receive} -| | Then sub-Interface SPAN Operational Data from Honeycomb should be -| | ... | ${node} | ${interface1} | ${1} | ${settings_receive} - -| TC09: Honeycomb can configure SPAN on a sub-interface - transmit -| | [Documentation] | Honeycomb configures SPAN on sub-interface and verifies -| | ... | against VPP SPAN dump in state transmit. -| | ... -| | Given Sub-interface state from Honeycomb should be -| | ... | ${node} | ${interface1} | ${1} | down | up -| | When Honeycomb Configures SPAN on sub-interface -| | ... | ${node} | ${interface1} | ${1} | ${settings_transmit} -| | Then sub-Interface SPAN Operational Data from Honeycomb should be -| | ... | ${node} | ${interface1} | ${1} | ${settings_transmit} - -| TC10: Honeycomb can configure SPAN on a sub-interface - both -| | [Documentation] | Honeycomb configures SPAN on sub-interface and verifies -| | ... | against VPP SPAN dump in state both. -| | ... -| | Given Sub-interface state from Honeycomb should be -| | ... | ${node} | ${interface1} | ${1} | down | up -| | When Honeycomb Configures SPAN on sub-interface -| | ... | ${node} | ${interface1} | ${1} | ${settings_both} -| | Then sub-Interface SPAN Operational Data from Honeycomb should be -| | ... | ${node} | ${interface1} | ${1} | ${settings_both} - -| TC11: Honeycomb can configure SPAN on a sub-interface with two source interfaces -| | [Documentation] | Honeycomb configures SPAN on sub-interface and verifies -| | ... | against VPP SPAN dump in state both. -| | ... -| | Given Sub-interface state from Honeycomb should be -| | ... | ${node} | ${interface1} | ${1} | down | up -| | When Honeycomb Configures SPAN on sub-interface -| | ... | ${node} | ${interface1} | ${1} | ${settings_both} | ${settings_if2} -| | Then sub-Interface SPAN Operational Data from Honeycomb should be -| | ... | ${node} | ${interface1} | ${1} | ${settings_both} | ${settings_if2} - -| TC12: Honeycomb can disable SPAN on interface -| | [Documentation] | Honeycomb removes existing SPAN configuration -| | ... | from sub-interface. -| | ... -| | Given Sub-interface state from Honeycomb should be -| | ... | ${node} | ${interface1} | ${1} | down | up -| | Given sub-Interface SPAN Operational Data from Honeycomb should be -| | ... | ${node} | ${interface1} | ${1} | ${settings_both} | ${settings_if2} -| | When Honeycomb removes sub-interface SPAN configuration -| | ... | ${node} | ${interface1} | ${1} -| | Then sub-Interface SPAN Operational Data from Honeycomb should be empty -| | ... | ${node} | ${interface1} | ${1} - -| TC13: Honeycomb can configure SPAN with two destination sub-interfaces from the same source -| | [Documentation] | Honeycomb configures SPAN on two sub-interfaces -| | ... | and verifies against VPP SPAN dump. -| | ... -| | [Teardown] | Run Keywords -| | ... | Honeycomb removes sub-interface SPAN configuration -| | ... | ${node} | ${interface1} | ${1} | AND -| | ... | Honeycomb removes sub-interface SPAN configuration -| | ... | ${node} | ${interface2} | ${1} -| | ... -| | Given Honeycomb creates sub-interface | ${node} | ${interface2} -| | ... | ${sub_if_2_match} | ${sub_if_2_tags} | ${sub_if_2_settings} -| | When Honeycomb Configures SPAN on sub-interface -| | ... | ${node} | ${interface1} | ${1} | ${settings_if2} -| | And Honeycomb Configures SPAN on sub-interface -| | ... | ${node} | ${interface2} | ${1} | ${settings_if2} -| | Then Sub-Interface SPAN Operational Data from Honeycomb should be -| | ... | ${node} | ${interface1} | ${1} | ${settings_if2} -| | Then Sub-Interface SPAN Operational Data from Honeycomb should be -| | ... | ${node} | ${interface2} | ${1} | ${settings_if2} - -| TC14: DUT mirrors IPv4 packets from an interface to a sub-interface -| | [Documentation] -| | ... | [Top] TG=DUT1 -| | ... | [Cfg] (using Honeycomb) On DUT1 configure IPv4 address and set SPAN\ -| | ... | mirroring from one DUT interface to a sub-interface on the other\ -| | ... | interface. -| | ... | [Ver] Make TG send an ARP packet to DUT through one interface,\ -| | ... | then receive a copy of sent packet and of DUT's ARP reply\ -| | ... | on the sub-interface. -| | ... -| | [Teardown] | Show Packet Trace on All DUTs | ${nodes} -| | ... -| | Given Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Honeycomb creates sub-interface | ${dut_node} | ${dut_to_tg_if1} -| | ... | ${sub_if_1_match} | ${sub_if_1_tags} | ${sub_if_1_settings} -| | And Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if1} -| | ... | up -| | And Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if2} -| | ... | up -| | And Honeycomb sets the sub-interface up -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${1} -| | And Honeycomb sets interface IPv4 address with prefix | ${dut_node} -| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip} | ${prefix} -| | And And Honeycomb adds interface IPv4 neighbor -| | ... | ${dut_node} | ${dut_to_tg_if2} -| | ... | ${tg_to_dut_if2_ip} | ${tg_to_dut_if2_mac} -| | ${settings_5}= | create dictionary | state=both -| | ... | iface-ref=${dut_to_tg_if2} -| | And All Vpp Interfaces Ready Wait | ${nodes} -| | When Honeycomb Configures SPAN on sub-interface -| | ... | ${node} | ${dut_to_tg_if1} | ${1} | ${settings_5} -| | Then Send Packet And Check Received Copies | ${tg_node} -| | ... | ${tg_to_dut_if2} | ${tg_to_dut_if2_mac} -| | ... | ${dut_to_tg_if2_mac} | ${tg_to_dut_if1} -| | ... | ${tg_to_dut_if2_ip} | ${dut_to_tg_if2_ip} | ICMP |