diff options
Diffstat (limited to 'tests/honeycomb/perf')
4 files changed, 332 insertions, 0 deletions
diff --git a/tests/honeycomb/perf/__init__.robot b/tests/honeycomb/perf/__init__.robot new file mode 100644 index 0000000000..b984993139 --- /dev/null +++ b/tests/honeycomb/perf/__init__.robot @@ -0,0 +1,61 @@ +# Copyright (c) 2017 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Variables*** +# Honeycomb node to run tests on. +| ${node}= | ${nodes['DUT1']} + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/shared/interfaces.robot +| Resource | resources/libraries/robot/honeycomb/honeycomb.robot +| Resource | resources/libraries/robot/honeycomb/performance.robot +| Library | resources.libraries.python.SetupFramework +| Library | resources.libraries.python.CpuUtils +| Library | resources.libraries.python.honeycomb.Performance +| Suite Setup | Setup suite for Honeycomb performance tests +| Suite Teardown | Run Keywords +| ... | Stop VPP Service on DUT | ${node} +| ... | AND | Archive Honeycomb Log File | ${node} | perf=${True} +| ... | AND | Stop honeycomb service on DUTs | ${node} + +*** Keywords *** +| Setup suite for Honeycomb performance tests +| | [Documentation] | Setup variables and configure VPP and Honeycomb +| | ... | for performance testing. +| | ... +| | Set Global Variable | ${node} +| | ${cores}= | Get Length | ${node['cpuinfo']} +| | Set Global Variable | ${cores} +| | Stop VPP Service on DUT | ${node} +| | Stop Honeycomb service on DUTs | ${node} +| | Generate VPP Startup Configuration for Honeycomb Test on DUT | ${node} +| | Configure Restconf binding address | ${node} +| | Configure Log Level | ${node} | INFO +| | Configure Persistence | ${node} | disable +| | Configure jVPP timeout | ${node} | ${14} +| | Generate Honeycomb startup configuration for performance test +| | ... | ${node} | ${cores} +| | Clear Persisted Honeycomb Configuration | ${node} + +| Configure ODL Client for performance tests +| | [Documentation] | Setup ODL client for performance testing. +| | ... +| | ${use_odl_client}= | Get Variable Value | ${HC_ODL} +| | Run Keyword If | '${use_odl_client}' != '${NONE}' +| | ... | Run Keywords +| | ... | Set Global Variable | ${use_odl_client} +| | ... | AND | Copy ODL client | ${node} | ${HC_ODL} | ~ | ${install_dir} +| | ... | AND | Configure ODL Client Service On DUT | ${node} | ${install_dir} +| | ... | ELSE | Log | Variable HC_ODL is not present. Not using ODL. +| | ... | level=INFO diff --git a/tests/honeycomb/perf/localhostp1-tcp-netconf16t-crud-read.robot b/tests/honeycomb/perf/localhostp1-tcp-netconf16t-crud-read.robot new file mode 100644 index 0000000000..c13851cc62 --- /dev/null +++ b/tests/honeycomb/perf/localhostp1-tcp-netconf16t-crud-read.robot @@ -0,0 +1,87 @@ +# Copyright (c) 2017 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/honeycomb/performance.robot +| ... +| Suite Setup | Run Keywords +| ... | Configure Honeycomb Netconf threads | ${node} | ${16} +| ... | AND | Honeycomb Performance Suite Setup Generic | ${node} +| ... +| Suite Teardown | Honeycomb Performance Suite Teardown Generic | ${node} +| ... +| Force Tags | HC_PERF +| ... +| Documentation | *Base Netconf operational read test suite with sixteen Netconf +| ... | threads.* +| ... +| ... | *[Top] Network Topologies:* DUT1 single-node topology. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP. +| ... | *[Cfg] DUT configuration:* Default +| ... | *[Ver] verification:* DUT verifies Honeycomb's response times with zero +| ... | error or loss tolerance. Test packets are generated by DUT1 on localhost +| ... | loopback interface. +| ... | Traffic profile contains flow-groups containing REST requests +| ... | for operational reads. +| ... | *[Ref] Applicable standard specifications:* RFC6241. + +*** Test Cases *** +| TC01: Base operational read with 1 TG thread +| | [Documentation] +| | ... | [Ver] Measure response time using single trial throughput test +| | ... | with 100K requests generated in a single thread. +| | ${cycles}= | Set Variable | ${1} +| | ${threads}= | Set Variable | ${1} +| | ${entries}= | Set Variable | ${100000} +| | Run base operational read performance trial +| | ... | ${node} | ${cores} | ${cycles} | ${threads} | ${entries} + +| TC02: Base operational read with 2 TG threads +| | [Documentation] +| | ... | [Ver] Measure response time using single trial throughput test +| | ... | with 100K requests generated in two threads. +| | ${cycles}= | Set Variable | ${1} +| | ${threads}= | Set Variable | ${2} +| | ${entries}= | Set Variable | ${50000} +| | Run base operational read performance trial +| | ... | ${node} | ${cores} | ${cycles} | ${threads} | ${entries} + +| TC03: Base operational read with 4 TG threads +| | [Documentation] +| | ... | [Ver] Measure response time using single trial throughput test +| | ... | with 100K requests generated in four threads. +| | ${cycles}= | Set Variable | ${1} +| | ${threads}= | Set Variable | ${4} +| | ${entries}= | Set Variable | ${25000} +| | Run base operational read performance trial +| | ... | ${node} | ${cores} | ${cycles} | ${threads} | ${entries} + +| TC04: Base operational read with 8 TG threads +| | [Documentation] +| | ... | [Ver] Measure response time using single trial throughput test +| | ... | with 100K requests generated in eigth threads. +| | ${cycles}= | Set Variable | ${1} +| | ${threads}= | Set Variable | ${8} +| | ${entries}= | Set Variable | ${12500} +| | Run base operational read performance trial +| | ... | ${node} | ${cores} | ${cycles} | ${threads} | ${entries} + +| TC05: Base operational read with 16 TG threads +| | [Documentation] +| | ... | [Ver] Measure response time using single trial throughput test +| | ... | with 100K requests generated in sixteen threads. +| | ${cycles}= | Set Variable | ${1} +| | ${threads}= | Set Variable | ${16} +| | ${entries}= | Set Variable | ${6250} +| | Run base operational read performance trial +| | ... | ${node} | ${cores} | ${cycles} | ${threads} | ${entries} diff --git a/tests/honeycomb/perf/localhostp1-tcp-netconf1t-crud-read.robot b/tests/honeycomb/perf/localhostp1-tcp-netconf1t-crud-read.robot new file mode 100644 index 0000000000..d46fdf795b --- /dev/null +++ b/tests/honeycomb/perf/localhostp1-tcp-netconf1t-crud-read.robot @@ -0,0 +1,87 @@ +# Copyright (c) 2017 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/honeycomb/performance.robot +| ... +| Suite Setup | Run Keywords +| ... | Configure Honeycomb Netconf threads | ${node} | ${1} +| ... | AND | Honeycomb Performance Suite Setup Generic | ${node} +| ... +| Suite Teardown | Honeycomb Performance Suite Teardown Generic | ${node} +| ... +| Force Tags | HC_PERF +| ... +| Documentation | *Base Netconf operational read test suite with one Netconf +| ... | thread.* +| ... +| ... | *[Top] Network Topologies:* DUT1 single-node topology. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP. +| ... | *[Cfg] DUT configuration:* Default +| ... | *[Ver] verification:* DUT verifies Honeycomb's response times with zero +| ... | error or loss tolerance. Test packets are generated by DUT1 on localhost +| ... | loopback interface. +| ... | Traffic profile contains flow-groups containing REST requests +| ... | for operational reads. +| ... | *[Ref] Applicable standard specifications:* RFC6241. + +*** Test Cases *** +| TC01: Base operational read with 1 TG thread +| | [Documentation] +| | ... | [Ver] Measure response time using single trial throughput test +| | ... | with 100K requests generated in a single thread. +| | ${cycles}= | Set Variable | ${1} +| | ${threads}= | Set Variable | ${1} +| | ${entries}= | Set Variable | ${100000} +| | Run base operational read performance trial +| | ... | ${node} | ${cores} | ${cycles} | ${threads} | ${entries} + +| TC02: Base operational read with 2 TG threads +| | [Documentation] +| | ... | [Ver] Measure response time using single trial throughput test +| | ... | with 100K requests generated in two threads. +| | ${cycles}= | Set Variable | ${1} +| | ${threads}= | Set Variable | ${2} +| | ${entries}= | Set Variable | ${50000} +| | Run base operational read performance trial +| | ... | ${node} | ${cores} | ${cycles} | ${threads} | ${entries} + +| TC03: Base operational read with 4 TG threads +| | [Documentation] +| | ... | [Ver] Measure response time using single trial throughput test +| | ... | with 100K requests generated in four threads. +| | ${cycles}= | Set Variable | ${1} +| | ${threads}= | Set Variable | ${4} +| | ${entries}= | Set Variable | ${25000} +| | Run base operational read performance trial +| | ... | ${node} | ${cores} | ${cycles} | ${threads} | ${entries} + +| TC04: Base operational read with 8 TG threads +| | [Documentation] +| | ... | [Ver] Measure response time using single trial throughput test +| | ... | with 100K requests generated in eigth threads. +| | ${cycles}= | Set Variable | ${1} +| | ${threads}= | Set Variable | ${8} +| | ${entries}= | Set Variable | ${12500} +| | Run base operational read performance trial +| | ... | ${node} | ${cores} | ${cycles} | ${threads} | ${entries} + +| TC05: Base operational read with 16 TG threads +| | [Documentation] +| | ... | [Ver] Measure response time using single trial throughput test +| | ... | with 100K requests generated in sixteen threads. +| | ${cycles}= | Set Variable | ${1} +| | ${threads}= | Set Variable | ${16} +| | ${entries}= | Set Variable | ${6250} +| | Run base operational read performance trial +| | ... | ${node} | ${cores} | ${cycles} | ${threads} | ${entries} diff --git a/tests/honeycomb/perf/localhostp1-tcp-netconf8t-crud-read.robot b/tests/honeycomb/perf/localhostp1-tcp-netconf8t-crud-read.robot new file mode 100644 index 0000000000..9928f15f1d --- /dev/null +++ b/tests/honeycomb/perf/localhostp1-tcp-netconf8t-crud-read.robot @@ -0,0 +1,97 @@ +# Copyright (c) 2017 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/honeycomb/performance.robot +| ... +| Suite Setup | Run Keywords +| ... | Configure Honeycomb Netconf threads | ${node} | ${8} +| ... | AND | Honeycomb Performance Suite Setup Generic | ${node} +| ... +| Suite Teardown | Honeycomb Performance Suite Teardown Generic | ${node} +| ... +| Force Tags | HC_PERF +| ... +| Documentation | *Base Netconf operational read test suite with eight Netconf +| ... | threads.* +| ... +| ... | *[Top] Network Topologies:* DUT1 single-node topology. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP. +| ... | *[Cfg] DUT configuration:* Default +| ... | *[Ver] verification:* DUT verifies Honeycomb's response times with zero +| ... | error or loss tolerance. Test packets are generated by DUT1 on localhost +| ... | loopback interface. +| ... | Traffic profile contains flow-groups containing REST requests +| ... | for operational reads. +| ... | *[Ref] Applicable standard specifications:* RFC6241. + +*** Test Cases *** +| TC01: Base operational read with 1 TG thread +| | [Documentation] +| | ... | [Ver] Measure response time using single trial throughput test +| | ... | with 100K requests generated in a single thread. +| | ${cycles}= | Set Variable | ${1} +| | ${threads}= | Set Variable | ${1} +| | ${entries}= | Set Variable | ${100000} +| | Run base operational read performance trial +| | ... | ${node} | ${cores} | ${cycles} | ${threads} | ${entries} + +| TC02: Base operational read with 2 TG threads +| | [Documentation] +| | ... | [Ver] Measure response time using single trial throughput test +| | ... | with 100K requests generated in two threads. +| | ${cycles}= | Set Variable | ${1} +| | ${threads}= | Set Variable | ${2} +| | ${entries}= | Set Variable | ${50000} +| | Run base operational read performance trial +| | ... | ${node} | ${cores} | ${cycles} | ${threads} | ${entries} + +| TC03: Base operational read with 4 TG threads +| | [Documentation] +| | ... | [Ver] Measure response time using single trial throughput test +| | ... | with 100K requests generated in four threads. +| | ${cycles}= | Set Variable | ${1} +| | ${threads}= | Set Variable | ${4} +| | ${entries}= | Set Variable | ${25000} +| | Run base operational read performance trial +| | ... | ${node} | ${cores} | ${cycles} | ${threads} | ${entries} + +| TC04: Base operational read with 8 TG threads +| | [Documentation] +| | ... | [Ver] Measure response time using single trial throughput test +| | ... | with 100K requests generated in eigth threads. +| | ${cycles}= | Set Variable | ${1} +| | ${threads}= | Set Variable | ${8} +| | ${entries}= | Set Variable | ${12500} +| | Run base operational read performance trial +| | ... | ${node} | ${cores} | ${cycles} | ${threads} | ${entries} + +| TC05: Base operational read with 16 TG threads +| | [Documentation] +| | ... | [Ver] Measure response time using single trial throughput test +| | ... | with 100K requests generated in sixteen threads. +| | ${cycles}= | Set Variable | ${1} +| | ${threads}= | Set Variable | ${16} +| | ${entries}= | Set Variable | ${6250} +| | Run base operational read performance trial +| | ... | ${node} | ${cores} | ${cycles} | ${threads} | ${entries} + +| TC05: Base operational read with 24 TG threads +| | [Documentation] +| | ... | [Ver] Measure response time using single trial throughput test +| | ... | with 100K requests generated in sixteen threads. +| | ${cycles}= | Set Variable | ${1} +| | ${threads}= | Set Variable | ${24} +| | ${entries}= | Set Variable | ${6250} +| | Run base operational read performance trial +| | ... | ${node} | ${cores} | ${cycles} | ${threads} | ${entries} |