diff options
Diffstat (limited to 'tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-ndrpdrdisc.robot')
| -rw-r--r-- | tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-ndrpdrdisc.robot | 326 |
1 files changed, 326 insertions, 0 deletions
diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-ndrpdrdisc.robot b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-ndrpdrdisc.robot new file mode 100644 index 0000000000..ea4ce8d930 --- /dev/null +++ b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-ndrpdrdisc.robot @@ -0,0 +1,326 @@ +# Copyright (c) 2017 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC +| ... | NIC_Intel-X520-DA2 | ETH | L2BDMACLRN | L2BDBASE | SCALE | MEMIF +| ... | K8S | 1VSWITCH | 4VNF | VPP_AGENT | SFC_CONTROLLER | CHAIN +| ... +| Suite Setup | Set up 3-node performance topology with DUT's NIC model +| ... | L2 | Intel-X520-DA2 +| ... +| Test Setup | Set up performance test with Ligato Kubernetes +| ... +| Suite Teardown | Tear down 3-node performance topology +| ... +| Test Teardown | Tear down performance test with Ligato Kubernetes +| ... +| Documentation | *RFC2544: Pkt throughput L2BD test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with two L2 +| ... | bridge domains and MAC learning enabled. DUT1 and DUT2 tested with +| ... | 2p10GE NIC X520 Niantic by Intel. +| ... | VNF Containers are connected to VSWITCH container via Memif interface. +| ... | All containers are running same VPP version. Containers are deployed +| ... | with Kubernetes. Configuration is applied by vnf-agent. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop +| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage +| ... | of packets transmitted. NDR and PDR are discovered for different +| ... | Ethernet L2 frame sizes using either binary search or linear search +| ... | algorithms with configured starting rate and final step that determines +| ... | throughput measurement resolution. Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, 253 flows per flow-group) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static +| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +| ${avg_imix_framesize}= | ${357.833} +# X520-DA2 bandwidth limit +| ${s_limit} | ${10000000000} +# SFC profile +| ${sfc_profile} | configmaps/eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain +# Traffic profile: +| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 +# CPU settings +| ${system_cpus}= | ${1} +| ${vswitch_cpus}= | ${5} +| ${vnf_cpus}= | ${2} + +*** Keywords *** +| Create Kubernetes VSWITCH startup config on all DUTs +| | [Documentation] | Create base startup configuration of VSWITCH in Kubernetes +| | ... | deploy to all DUTs. +| | ... +| | ... | *Arguments:* +| | ... | - ${framesize} - L2 framesize. Type: integer +| | ... | - ${wt} - Worker threads. Type: integer +| | ... | - ${rxq} - RX queues. Type: integer +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Create Kubernetes VSWITCH startup config on all DUTs \| ${64} \ +| | ... | \| ${1} \| ${1} +| | ... +| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ${dut1_numa}= | Get interfaces numa node | ${dut1} +| | ... | ${dut1_if1} | ${dut1_if2} +| | ${dut2_numa}= | Get interfaces numa node | ${dut2} +| | ... | ${dut2_if1} | ${dut2_if2} +| | ${dut1_if1_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if1} +| | ${dut1_if2_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if2} +| | ${dut2_if1_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if1} +| | ${dut2_if2_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if2} +| | ${cpu_cnt}= | Evaluate | ${wt}+1 +| | ${config}= | Run keyword | Create Kubernetes VSWITCH startup config +| | ... | node=${dut1} | cpu_cnt=${cpu_cnt} | cpu_node=${dut1_numa} +| | ... | cpu_skip=${system_cpus} | smt_used=${False} +| | ... | filename=/tmp/vswitch.conf | framesize=${framesize} | rxq=${rxq} +| | ... | if1=${dut1_if1_pci} | if2=${dut1_if2_pci} +| | ${config}= | Run keyword | Create Kubernetes VSWITCH startup config +| | ... | node=${dut2} | cpu_cnt=${cpu_cnt} | cpu_node=${dut2_numa} +| | ... | cpu_skip=${system_cpus} | smt_used=${False} +| | ... | filename=/tmp/vswitch.conf | framesize=${framesize} | rxq=${rxq} +| | ... | if1=${dut2_if1_pci} | if2=${dut2_if2_pci} + +| Create Kubernetes VNF'${i}' startup config on all DUTs +| | [Documentation] | Create base startup configuration of VNF in Kubernetes +| | ... | deploy to all DUTs. +| | ... +| | ${i_int}= | Convert To Integer | ${i} +| | ${cpu_skip}= | Evaluate | ${vswitch_cpus}+${system_cpus} +| | ${dut1_numa}= | Get interfaces numa node | ${dut1} +| | ... | ${dut1_if1} | ${dut1_if2} +| | ${dut2_numa}= | Get interfaces numa node | ${dut2} +| | ... | ${dut2_if1} | ${dut2_if2} +| | ${config}= | Run keyword | Create Kubernetes VNF startup config +| | ... | node=${dut1} | cpu_cnt=${vnf_cpus} | cpu_node=${dut1_numa} +| | ... | cpu_skip=${cpu_skip} | smt_used=${False} | filename=/tmp/vnf${i}.conf +| | ... | i=${i_int} +| | ${config}= | Run keyword | Create Kubernetes VNF startup config +| | ... | node=${dut2} | cpu_cnt=${vnf_cpus} | cpu_node=${dut2_numa} +| | ... | cpu_skip=${cpu_skip} | smt_used=${False} | filename=/tmp/vnf${i}.conf +| | ... | i=${i_int} + +| L2 Bridge Domain Binary Search +| | [Arguments] | ${framesize} | ${min_rate} | ${wt} | ${rxq} | ${search_type} +| | Set Test Variable | ${framesize} +| | Set Test Variable | ${min_rate} +| | ${get_framesize}= | Set Variable If +| | ... | "${framesize}" == "IMIX_v4_1" | ${avg_imix_framesize} | ${framesize} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${dut1_if1_name}= | Get interface name | ${dut1} | ${dut1_if1} +| | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2} +| | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1} +| | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2} +| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} +| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} +| | Create Kubernetes VSWITCH startup config on all DUTs | ${get_framesize} +| | ... | ${wt} | ${rxq} +| | Create Kubernetes VNF'1' startup config on all DUTs +| | Create Kubernetes VNF'2' startup config on all DUTs +| | Create Kubernetes VNF'3' startup config on all DUTs +| | Create Kubernetes VNF'4' startup config on all DUTs +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vswitch-vpp-cfg | vpp.conf=/tmp/vswitch.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf1-vpp-cfg | vpp.conf=/tmp/vnf1.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf2-vpp-cfg | vpp.conf=/tmp/vnf2.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf3-vpp-cfg | vpp.conf=/tmp/vnf3.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf4-vpp-cfg | vpp.conf=/tmp/vnf4.conf +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf3 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf3 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf4 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf4 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut1_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut1_if2_name} +| | Apply Kubernetes resource on node | ${dut2} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut2_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut2_if2_name} +| | Wait for Kubernetes PODs on all DUTs | ${nodes} | csit +| | Set Kubernetes PODs affinity on all DUTs | ${nodes} +| | Run Keyword If | '${search_type}' == 'NDR' +| | ... | Find NDR using binary search and pps +| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} +| | ... | ${min_rate} | ${max_rate} | ${threshold} +| | ... | ELSE IF | '${search_type}' == 'PDR' +| | ... | Find PDR using binary search and pps +| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} +| | ... | ${min_rate} | ${max_rate} | ${threshold} +| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} + +*** Test Cases *** +| tc01-64B-1t1c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 100kpps. +| | ... +| | [Tags] | 64B | 1T1C | STHREAD | NDRDISC +| | [Template] | L2 Bridge Domain Binary Search +| | framesize=${64} | min_rate=${100000} | wt=1 | rxq=1 | search_type=NDR + +| tc02-64B-1t1c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 100kpps, LT=0.5%. +| | ... +| | [Tags] | 64B | 1T1C | STHREAD | PDRDISC | SKIP_PATCH +| | [Template] | L2 Bridge Domain Binary Search +| | framesize=${64} | min_rate=${100000} | wt=1 | rxq=1 | search_type=PDR + +| tc03-IMIX-1t1c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\ +| | ... | linerate, step 10kpps. +| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) +| | ... +| | [Tags] | IMIX | 1T1C | STHREAD | NDRDISC +| | [Template] | L2 Bridge Domain Binary Search +| | framesize=IMIX_v4_1 | min_rate=${10000} | wt=1 | rxq=1 | search_type=NDR + +| tc04-IMIX-1t1c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\ +| | ... | linerate, step 10kpps, LT=0.5%. +| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) +| | ... +| | [Tags] | IMIX | 1T1C | STHREAD | PDRDISC | SKIP_PATCH +| | [Template] | L2 Bridge Domain Binary Search +| | framesize=IMIX_v4_1 | min_rate=${10000} | wt=1 | rxq=1 | search_type=PDR + +| tc05-1518B-1t1c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 10kpps. +| | ... +| | [Tags] | 1518B | 1T1C | STHREAD | NDRDISC +| | [Template] | L2 Bridge Domain Binary Search +| | framesize=${1518} | min_rate=${10000} | wt=1 | rxq=1 | search_type=NDR + +| tc06-1518B-1t1c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 10kpps, LT=0.5%. +| | ... +| | [Tags] | 1518B | 1T1C | STHREAD | PDRDISC | SKIP_PATCH +| | [Template] | L2 Bridge Domain Binary Search +| | framesize=${1518} | min_rate=${10000} | wt=1 | rxq=1 | search_type=PDR + +| tc07-64B-2t2c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 2 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 100kpps. +| | ... +| | [Tags] | 64B | 2T2C | MTHREAD | NDRDISC +| | [Template] | L2 Bridge Domain Binary Search +| | framesize=${64} | min_rate=${100000} | wt=2 | rxq=1 | search_type=NDR + +| tc08-64B-2t2c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 2 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 100kpps, LT=0.5%. +| | ... +| | [Tags] | 64B | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH +| | [Template] | L2 Bridge Domain Binary Search +| | framesize=${64} | min_rate=${100000} | wt=2 | rxq=1 | search_type=PDR + +| tc09-IMIX-2t2c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 2 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\ +| | ... | linerate, step 10kpps. +| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) +| | ... +| | [Tags] | IMIX | 2T2C | MTHREAD | NDRDISC | SKIP_PATCH +| | [Template] | L2 Bridge Domain Binary Search +| | framesize=IMIX_v4_1 | min_rate=${10000} | wt=2 | rxq=1 | search_type=NDR + +| tc10-IMIX-2t2c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\ +| | ... | linerate, step 10kpps, LT=0.5%. +| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) +| | ... +| | [Tags] | IMIX | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH +| | [Template] | L2 Bridge Domain Binary Search +| | framesize=IMIX_v4_1 | min_rate=${10000} | wt=2 | rxq=1 | search_type=PDR + +| tc11-1518B-2t2c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 10kpps. +| | ... +| | [Tags] | 1518B | 2T2C | MTHREAD | NDRDISC | SKIP_PATCH +| | [Template] | L2 Bridge Domain Binary Search +| | framesize=${1518} | min_rate=${10000} | wt=2 | rxq=1 | search_type=NDR + +| tc12-1518B-2t2c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 10kpps, LT=0.5%. +| | ... +| | [Tags] | 1518B | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH +| | [Template] | L2 Bridge Domain Binary Search +| | framesize=${1518} | min_rate=${10000} | wt=2 | rxq=1 | search_type=PDR |