diff options
Diffstat (limited to 'tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr.robot')
| -rw-r--r-- | tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr.robot | 169 |
1 files changed, 0 insertions, 169 deletions
diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr.robot b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr.robot deleted file mode 100644 index 0246cdcd4a..0000000000 --- a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr.robot +++ /dev/null @@ -1,169 +0,0 @@ -# Copyright (c) 2018 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X520-DA2 | ETH | L2XCFWD | SCALE | L2XCBASE | MEMIF -| ... | K8S | 1VSWITCH | 2VNF | VPP_AGENT | SFC_CONTROLLER | CHAIN -| ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L2 | Intel-X520-DA2 -| ... -| Test Setup | Set up performance test with Ligato Kubernetes -| ... -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Teardown | Tear down performance test with Ligato Kubernetes -| ... -| Test Template | Local Template -| ... -| Documentation | *RFC2544: Pkt throughput L2XC test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross- -| ... | connect. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel. -| ... | VNF Containers are connected to VSWITCH container via Memif interface. -| ... | All containers are running same VPP version. Containers are deployed -| ... | with Kubernetes. Configuration is applied by vnf-agent. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage -| ... | of packets transmitted. NDR and PDR are discovered for different -| ... | Ethernet L2 frame sizes using MLRsearch library. -| ... | TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 254 flows per flow-group) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static -| ... | payload. MAC addresses are matching MAC addresses of the TG node -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -# X520-DA2 bandwidth limit -| ${s_limit}= | ${10000000000} -# SFC profile -| ${sfc_profile}= | configmaps/eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 -# CPU settings -| ${system_cpus}= | ${1} -| ${vswitch_cpus}= | ${5} -| ${vnf_cpus}= | ${2} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs Container orchestrated config. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${min_rate} | ${10000} -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo -| | ... | ${s_limit} | ${framesize} -| | ... -| | ${dut1_if1_name}= | Get interface name | ${dut1} | ${dut1_if1} -| | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2} -| | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1} -| | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2} -| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} -| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} -| | Create Kubernetes VSWITCH startup config on all DUTs -| | ... | ${phy_cores} | ${rxq} | ${jumbo} -| | Create Kubernetes VNF'1' startup config on all DUTs -| | Create Kubernetes VNF'2' startup config on all DUTs -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vswitch-vpp-cfg | vpp.conf=/tmp/vswitch.conf -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vnf1-vpp-cfg | vpp.conf=/tmp/vnf1.conf -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vnf2-vpp-cfg | vpp.conf=/tmp/vnf2.conf -| | Apply Kubernetes resource on node | ${dut1} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 -| | Apply Kubernetes resource on node | ${dut2} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 -| | Apply Kubernetes resource on node | ${dut1} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 -| | Apply Kubernetes resource on node | ${dut2} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 -| | Apply Kubernetes resource on node | ${dut1} -| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} -| | ... | $$VSWITCH_IF1$$=${dut1_if1_name} -| | ... | $$VSWITCH_IF2$$=${dut1_if2_name} -| | Apply Kubernetes resource on node | ${dut2} -| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} -| | ... | $$VSWITCH_IF1$$=${dut2_if1_name} -| | ... | $$VSWITCH_IF2$$=${dut2_if2_name} -| | Wait for Kubernetes PODs on all DUTs | ${nodes} | csit -| | Set Kubernetes PODs affinity on all DUTs | ${nodes} -| | Find NDR and PDR intervals using optimized search -| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} - -*** Test Cases *** -| tc01-64B-1c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} |