diff options
Diffstat (limited to 'tests/kubernetes/perf')
41 files changed, 3454 insertions, 61 deletions
diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-mrr.robot b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-mrr.robot new file mode 100644 index 0000000000..f8b4dbe279 --- /dev/null +++ b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-mrr.robot @@ -0,0 +1,159 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR +| ... | NIC_Intel-X520-DA2 | ETH | L2BDMACLRN | L2BDBASE | BASE | MEMIF +| ... | K8S | 1VSWITCH | 1VNF | VPP_AGENT | SFC_CONTROLLER | PARALLEL +| ... +| Suite Setup | Set up 3-node performance topology with DUT's NIC model +| ... | L2 | Intel-X520-DA2 +| ... +| Test Setup | Set up performance test with Ligato Kubernetes +| ... +| Suite Teardown | Tear down 3-node performance topology +| ... +| Test Teardown | Tear down performance test with Ligato Kubernetes +| ... +| Test Template | Local Template +| ... +| Documentation | *RFC2544: Pkt throughput L2BD test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with two L2 +| ... | bridge domains and MAC learning enabled. DUT1 and DUT2 tested with +| ... | 2p10GE NIC X520 Niantic by Intel. +| ... | VNF Container is connected to VSWITCH container via Memif interface. All +| ... | containers is running same VPP version. Containers are deployed with +| ... | Kubernetes. Configuration is applied by vnf-agent. +| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic +| ... | at line rate and reports total received/sent packets over trial period. +| ... | TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, 254 flows per flow-group) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static +| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +# X520-DA2 bandwidth limit +| ${s_limit} | ${10000000000} +# SFC profile +| ${sfc_profile} | configmaps/eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral +# Traffic profile: +| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 +# CPU settings +| ${system_cpus}= | ${1} +| ${vswitch_cpus}= | ${5} +| ${vnf_cpus}= | ${2} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs Container orchestrated config. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ +| | ... | trial throughput test. +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo +| | ... | ${s_limit} | ${framesize} +| | ... +| | ${dut1_if1_name}= | Get interface name | ${dut1} | ${dut1_if1} +| | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2} +| | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1} +| | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2} +| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} +| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} +| | Create Kubernetes VSWITCH startup config on all DUTs +| | ... | ${phy_cores} | ${rxq} | ${jumbo} +| | Create Kubernetes VNF'1' startup config on all DUTs +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vswitch-vpp-cfg | vpp.conf=/tmp/vswitch.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf1-vpp-cfg | vpp.conf=/tmp/vnf1.conf +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut1_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut1_if2_name} +| | Apply Kubernetes resource on node | ${dut2} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut2_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut2_if2_name} +| | Wait for Kubernetes PODs on all DUTs | ${nodes} | csit +| | Set Kubernetes PODs affinity on all DUTs | ${nodes} +| | Then Traffic should pass with maximum rate +| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} + +*** Test Cases *** +| tc01-64B-1c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-mrr +| | [Tags] | 64B | 1C +| | framesize=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-mrr +| | [Tags] | 64B | 2C +| | framesize=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-mrr +| | [Tags] | 64B | 4C +| | framesize=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-mrr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-mrr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-mrr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-mrr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-mrr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-mrr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-mrr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-mrr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-mrr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr.robot b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr.robot index c3b1216a99..885464df76 100644 --- a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr.robot +++ b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2017 Cisco and/or its affiliates. +# Copyright (c) 2018 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -25,6 +25,7 @@ | ... | Suite Teardown | Tear down 3-node performance topology | ... +| # TODO: Create teardown based on Tear down performance discovery test. | Test Teardown | Tear down performance test with Ligato Kubernetes | ... | Test Template | Local Template @@ -46,7 +47,7 @@ | ... | of packets transmitted. NDR and PDR are discovered for different | ... | Ethernet L2 frame sizes using MLRsearch library. | ... | TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 253 flows per flow-group) with all packets +| ... | (flow-group per direction, 254 flows per flow-group) with all packets | ... | containing Ethernet header, IPv4 header with IP protocol=61 and static | ... | payload. MAC addresses are matching MAC addresses of the TG node | ... | interfaces. @@ -115,7 +116,7 @@ *** Test Cases *** | tc01-64B-1c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr -| | [Tags] | 64B | 1C | THIS +| | [Tags] | 64B | 1C | | framesize=${64} | phy_cores=${1} | tc02-64B-2c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr @@ -161,4 +162,3 @@ | tc12-IMIX-4c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr | | [Tags] | IMIX | 4C | | framesize=IMIX_v4_1 | phy_cores=${4} - diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-mrr.robot b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-mrr.robot new file mode 100644 index 0000000000..bb1090c752 --- /dev/null +++ b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-mrr.robot @@ -0,0 +1,166 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR +| ... | NIC_Intel-X520-DA2 | ETH | L2BDMACLRN | L2BDBASE | SCALE | MEMIF +| ... | K8S | 1VSWITCH | 2VNF | VPP_AGENT | SFC_CONTROLLER | HORIZONTAL +| ... +| Suite Setup | Set up 3-node performance topology with DUT's NIC model +| ... | L2 | Intel-X520-DA2 +| ... +| Test Setup | Set up performance test with Ligato Kubernetes +| ... +| Suite Teardown | Tear down 3-node performance topology +| ... +| Test Teardown | Tear down performance test with Ligato Kubernetes +| ... +| Test Template | Local Template +| ... +| Documentation | *RFC2544: Pkt throughput L2BD test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with two L2 +| ... | bridge domains and MAC learning enabled. DUT1 and DUT2 tested with +| ... | 2p10GE NIC X520 Niantic by Intel. +| ... | VNF Containers are connected to VSWITCH container via Memif interface. +| ... | All containers are running same VPP version. Containers are deployed +| ... | with Kubernetes. Configuration is applied by vnf-agent. +| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic +| ... | at line rate and reports total received/sent packets over trial period. +| ... | TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, 254 flows per flow-group) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static +| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +# X520-DA2 bandwidth limit +| ${s_limit} | ${10000000000} +# SFC profile +| ${sfc_profile} | configmaps/eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz +# Traffic profile: +| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 +# CPU settings +| ${system_cpus}= | ${1} +| ${vswitch_cpus}= | ${5} +| ${vnf_cpus}= | ${2} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs Container orchestrated config. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ +| | ... | trial throughput test. +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo +| | ... | ${s_limit} | ${framesize} +| | ... +| | ${dut1_if1_name}= | Get interface name | ${dut1} | ${dut1_if1} +| | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2} +| | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1} +| | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2} +| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} +| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} +| | Create Kubernetes VSWITCH startup config on all DUTs +| | ... | ${phy_cores} | ${rxq} | ${jumbo} +| | Create Kubernetes VNF'1' startup config on all DUTs +| | Create Kubernetes VNF'2' startup config on all DUTs +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vswitch-vpp-cfg | vpp.conf=/tmp/vswitch.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf1-vpp-cfg | vpp.conf=/tmp/vnf1.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf2-vpp-cfg | vpp.conf=/tmp/vnf2.conf +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut1_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut1_if2_name} +| | Apply Kubernetes resource on node | ${dut2} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut2_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut2_if2_name} +| | Wait for Kubernetes PODs on all DUTs | ${nodes} | csit +| | Set Kubernetes PODs affinity on all DUTs | ${nodes} +| | Then Traffic should pass with maximum rate +| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} + +*** Test Cases *** +| tc01-64B-1c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-mrr +| | [Tags] | 64B | 1C +| | framesize=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-mrr +| | [Tags] | 64B | 2C +| | framesize=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-mrr +| | [Tags] | 64B | 4C +| | framesize=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-mrr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-mrr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-mrr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-mrr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-mrr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-mrr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-mrr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-mrr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-mrr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr.robot b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr.robot index e395166989..c508e29a8f 100644 --- a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr.robot +++ b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2017 Cisco and/or its affiliates. +# Copyright (c) 2018 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -46,7 +46,7 @@ | ... | of packets transmitted. NDR and PDR are discovered for different | ... | Ethernet L2 frame sizes using MLRsearch library. | ... | TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 253 flows per flow-group) with all packets +| ... | (flow-group per direction, 254 flows per flow-group) with all packets | ... | containing Ethernet header, IPv4 header with IP protocol=61 and static | ... | payload. MAC addresses are matching MAC addresses of the TG node | ... | interfaces. @@ -168,4 +168,3 @@ | tc12-IMIX-4c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr | | [Tags] | IMIX | 4C | | framesize=IMIX_v4_1 | phy_cores=${4} - diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-mrr.robot b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-mrr.robot new file mode 100644 index 0000000000..daafb65402 --- /dev/null +++ b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-mrr.robot @@ -0,0 +1,180 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR +| ... | NIC_Intel-X520-DA2 | ETH | L2BDMACLRN | L2BDBASE | SCALE | MEMIF +| ... | K8S | 1VSWITCH | 4VNF | VPP_AGENT | SFC_CONTROLLER | HORIZONTAL +| ... +| Suite Setup | Set up 3-node performance topology with DUT's NIC model +| ... | L2 | Intel-X520-DA2 +| ... +| Test Setup | Set up performance test with Ligato Kubernetes +| ... +| Suite Teardown | Tear down 3-node performance topology +| ... +| Test Teardown | Tear down performance test with Ligato Kubernetes +| ... +| Test Template | Local Template +| ... +| Documentation | *RFC2544: Pkt throughput L2BD test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with two L2 +| ... | bridge domains and MAC learning enabled. DUT1 and DUT2 tested with +| ... | 2p10GE NIC X520 Niantic by Intel. +| ... | VNF Containers are connected to VSWITCH container via Memif interface. +| ... | All containers are running same VPP version. Containers are deployed +| ... | with Kubernetes. Configuration is applied by vnf-agent. +| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic +| ... | at line rate and reports total received/sent packets over trial period. +| ... | TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, 254 flows per flow-group) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static +| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +# X520-DA2 bandwidth limit +| ${s_limit} | ${10000000000} +# SFC profile +| ${sfc_profile} | configmaps/eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz +# Traffic profile: +| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 +# CPU settings +| ${system_cpus}= | ${1} +| ${vswitch_cpus}= | ${5} +| ${vnf_cpus}= | ${2} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs Container orchestrated config. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ +| | ... | trial throughput test. +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo +| | ... | ${s_limit} | ${framesize} +| | ... +| | ${dut1_if1_name}= | Get interface name | ${dut1} | ${dut1_if1} +| | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2} +| | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1} +| | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2} +| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} +| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} +| | Create Kubernetes VSWITCH startup config on all DUTs +| | ... | ${phy_cores} | ${rxq} | ${jumbo} +| | Create Kubernetes VNF'1' startup config on all DUTs +| | Create Kubernetes VNF'2' startup config on all DUTs +| | Create Kubernetes VNF'3' startup config on all DUTs +| | Create Kubernetes VNF'4' startup config on all DUTs +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vswitch-vpp-cfg | vpp.conf=/tmp/vswitch.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf1-vpp-cfg | vpp.conf=/tmp/vnf1.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf2-vpp-cfg | vpp.conf=/tmp/vnf2.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf3-vpp-cfg | vpp.conf=/tmp/vnf3.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf4-vpp-cfg | vpp.conf=/tmp/vnf4.conf +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf3 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf3 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf4 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf4 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut1_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut1_if2_name} +| | Apply Kubernetes resource on node | ${dut2} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut2_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut2_if2_name} +| | Wait for Kubernetes PODs on all DUTs | ${nodes} | csit +| | Set Kubernetes PODs affinity on all DUTs | ${nodes} +| | Then Traffic should pass with maximum rate +| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} + +*** Test Cases *** +| tc01-64B-1c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-mrr +| | [Tags] | 64B | 1C +| | framesize=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-mrr +| | [Tags] | 64B | 2C +| | framesize=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-mrr +| | [Tags] | 64B | 4C +| | framesize=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-mrr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-mrr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-mrr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-mrr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-mrr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-mrr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-mrr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-mrr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-mrr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr.robot b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr.robot index 6530ae8cab..f4d9f63747 100644 --- a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr.robot +++ b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2017 Cisco and/or its affiliates. +# Copyright (c) 2018 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -46,7 +46,7 @@ | ... | of packets transmitted. NDR and PDR are discovered for different | ... | Ethernet L2 frame sizes using MLRsearch library. | ... | TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 253 flows per flow-group) with all packets +| ... | (flow-group per direction, 254 flows per flow-group) with all packets | ... | containing Ethernet header, IPv4 header with IP protocol=61 and static | ... | payload. MAC addresses are matching MAC addresses of the TG node | ... | interfaces. @@ -182,4 +182,3 @@ | tc12-IMIX-4c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr | | [Tags] | IMIX | 4C | | framesize=IMIX_v4_1 | phy_cores=${4} - diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-mrr.robot b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-mrr.robot new file mode 100644 index 0000000000..ca3edc833e --- /dev/null +++ b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-mrr.robot @@ -0,0 +1,166 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR +| ... | NIC_Intel-X520-DA2 | ETH | L2BDMACLRN | L2BDBASE | SCALE | MEMIF +| ... | K8S | 1VSWITCH | 2VNF | VPP_AGENT | SFC_CONTROLLER | CHAIN +| ... +| Suite Setup | Set up 3-node performance topology with DUT's NIC model +| ... | L2 | Intel-X520-DA2 +| ... +| Test Setup | Set up performance test with Ligato Kubernetes +| ... +| Suite Teardown | Tear down 3-node performance topology +| ... +| Test Teardown | Tear down performance test with Ligato Kubernetes +| ... +| Test Template | Local Template +| ... +| Documentation | *RFC2544: Pkt throughput L2BD test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with two L2 +| ... | bridge domains and MAC learning enabled. DUT1 and DUT2 tested with +| ... | 2p10GE NIC X520 Niantic by Intel. +| ... | VNF Containers are connected to VSWITCH container via Memif interface. +| ... | All containers are running same VPP version. Containers are deployed +| ... | with Kubernetes. Configuration is applied by vnf-agent. +| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic +| ... | at line rate and reports total received/sent packets over trial period. +| ... | TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, 254 flows per flow-group) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static +| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +# X520-DA2 bandwidth limit +| ${s_limit} | ${10000000000} +# SFC profile +| ${sfc_profile} | configmaps/eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain +# Traffic profile: +| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 +# CPU settings +| ${system_cpus}= | ${1} +| ${vswitch_cpus}= | ${5} +| ${vnf_cpus}= | ${2} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs Container orchestrated config. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ +| | ... | trial throughput test. +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo +| | ... | ${s_limit} | ${framesize} +| | ... +| | ${dut1_if1_name}= | Get interface name | ${dut1} | ${dut1_if1} +| | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2} +| | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1} +| | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2} +| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} +| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} +| | Create Kubernetes VSWITCH startup config on all DUTs +| | ... | ${phy_cores} | ${rxq} | ${jumbo} +| | Create Kubernetes VNF'1' startup config on all DUTs +| | Create Kubernetes VNF'2' startup config on all DUTs +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vswitch-vpp-cfg | vpp.conf=/tmp/vswitch.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf1-vpp-cfg | vpp.conf=/tmp/vnf1.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf2-vpp-cfg | vpp.conf=/tmp/vnf2.conf +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut1_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut1_if2_name} +| | Apply Kubernetes resource on node | ${dut2} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut2_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut2_if2_name} +| | Wait for Kubernetes PODs on all DUTs | ${nodes} | csit +| | Set Kubernetes PODs affinity on all DUTs | ${nodes} +| | Then Traffic should pass with maximum rate +| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} + +*** Test Cases *** +| tc01-64B-1c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-mrr +| | [Tags] | 64B | 1C +| | framesize=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-mrr +| | [Tags] | 64B | 2C +| | framesize=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-mrr +| | [Tags] | 64B | 4C +| | framesize=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-mrr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-mrr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-mrr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-mrr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-mrr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-mrr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-mrr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-mrr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-mrr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr.robot b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr.robot index d25c9ae094..2e5f1d0bdf 100644 --- a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr.robot +++ b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2017 Cisco and/or its affiliates. +# Copyright (c) 2018 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -46,7 +46,7 @@ | ... | of packets transmitted. NDR and PDR are discovered for different | ... | Ethernet L2 frame sizes using MLRsearch library. | ... | TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 253 flows per flow-group) with all packets +| ... | (flow-group per direction, 254 flows per flow-group) with all packets | ... | containing Ethernet header, IPv4 header with IP protocol=61 and static | ... | payload. MAC addresses are matching MAC addresses of the TG node | ... | interfaces. @@ -168,4 +168,3 @@ | tc12-IMIX-4c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr | | [Tags] | IMIX | 4C | | framesize=IMIX_v4_1 | phy_cores=${4} - diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-mrr.robot b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-mrr.robot new file mode 100644 index 0000000000..48c3a2d2ec --- /dev/null +++ b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-mrr.robot @@ -0,0 +1,180 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR +| ... | NIC_Intel-X520-DA2 | ETH | L2BDMACLRN | L2BDBASE | SCALE | MEMIF +| ... | K8S | 1VSWITCH | 4VNF | VPP_AGENT | SFC_CONTROLLER | CHAIN +| ... +| Suite Setup | Set up 3-node performance topology with DUT's NIC model +| ... | L2 | Intel-X520-DA2 +| ... +| Test Setup | Set up performance test with Ligato Kubernetes +| ... +| Suite Teardown | Tear down 3-node performance topology +| ... +| Test Teardown | Tear down performance test with Ligato Kubernetes +| ... +| Test Template | Local Template +| ... +| Documentation | *RFC2544: Pkt throughput L2BD test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with two L2 +| ... | bridge domains and MAC learning enabled. DUT1 and DUT2 tested with +| ... | 2p10GE NIC X520 Niantic by Intel. +| ... | VNF Containers are connected to VSWITCH container via Memif interface. +| ... | All containers are running same VPP version. Containers are deployed +| ... | with Kubernetes. Configuration is applied by vnf-agent. +| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic +| ... | at line rate and reports total received/sent packets over trial period. +| ... | TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, 254 flows per flow-group) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static +| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +# X520-DA2 bandwidth limit +| ${s_limit} | ${10000000000} +# SFC profile +| ${sfc_profile} | configmaps/eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain +# Traffic profile: +| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 +# CPU settings +| ${system_cpus}= | ${1} +| ${vswitch_cpus}= | ${5} +| ${vnf_cpus}= | ${2} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs Container orchestrated config. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ +| | ... | trial throughput test. +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo +| | ... | ${s_limit} | ${framesize} +| | ... +| | ${dut1_if1_name}= | Get interface name | ${dut1} | ${dut1_if1} +| | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2} +| | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1} +| | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2} +| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} +| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} +| | Create Kubernetes VSWITCH startup config on all DUTs +| | ... | ${phy_cores} | ${rxq} | ${jumbo} +| | Create Kubernetes VNF'1' startup config on all DUTs +| | Create Kubernetes VNF'2' startup config on all DUTs +| | Create Kubernetes VNF'3' startup config on all DUTs +| | Create Kubernetes VNF'4' startup config on all DUTs +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vswitch-vpp-cfg | vpp.conf=/tmp/vswitch.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf1-vpp-cfg | vpp.conf=/tmp/vnf1.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf2-vpp-cfg | vpp.conf=/tmp/vnf2.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf3-vpp-cfg | vpp.conf=/tmp/vnf3.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf4-vpp-cfg | vpp.conf=/tmp/vnf4.conf +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf3 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf3 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf4 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf4 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut1_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut1_if2_name} +| | Apply Kubernetes resource on node | ${dut2} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut2_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut2_if2_name} +| | Wait for Kubernetes PODs on all DUTs | ${nodes} | csit +| | Set Kubernetes PODs affinity on all DUTs | ${nodes} +| | Then Traffic should pass with maximum rate +| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} + +*** Test Cases *** +| tc01-64B-1c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-mrr +| | [Tags] | 64B | 1C +| | framesize=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-mrr +| | [Tags] | 64B | 2C +| | framesize=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-mrr +| | [Tags] | 64B | 4C +| | framesize=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-mrr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-mrr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-mrr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-mrr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-mrr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-mrr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-mrr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-mrr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-mrr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr.robot b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr.robot index 26336a23a2..e78bbd5b6a 100644 --- a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr.robot +++ b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2017 Cisco and/or its affiliates. +# Copyright (c) 2018 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -46,7 +46,7 @@ | ... | of packets transmitted. NDR and PDR are discovered for different | ... | Ethernet L2 frame sizes using MLRsearch library. | ... | TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 253 flows per flow-group) with all packets +| ... | (flow-group per direction, 254 flows per flow-group) with all packets | ... | containing Ethernet header, IPv4 header with IP protocol=61 and static | ... | payload. MAC addresses are matching MAC addresses of the TG node | ... | interfaces. @@ -182,4 +182,3 @@ | tc12-IMIX-4c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr | | [Tags] | IMIX | 4C | | framesize=IMIX_v4_1 | phy_cores=${4} - diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-mrr.robot b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-mrr.robot new file mode 100644 index 0000000000..5555d1d3eb --- /dev/null +++ b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-mrr.robot @@ -0,0 +1,158 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR +| ... | NIC_Intel-X520-DA2 | ETH | L2XCFWD | BASE | L2XCBASE | MEMIF +| ... | K8S | 1VSWITCH | 1VNF | VPP_AGENT | SFC_CONTROLLER | PARALLEL +| ... +| Suite Setup | Set up 3-node performance topology with DUT's NIC model +| ... | L2 | Intel-X520-DA2 +| ... +| Test Setup | Set up performance test with Ligato Kubernetes +| ... +| Suite Teardown | Tear down 3-node performance topology +| ... +| Test Teardown | Tear down performance test with Ligato Kubernetes +| ... +| Test Template | Local Template +| ... +| Documentation | *RFC2544: Pkt throughput L2XC test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross- +| ... | connect. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel. +| ... | VNF Container is connected to VSWITCH container via Memif interface. All +| ... | containers is running same VPP version. Containers are deployed with +| ... | Kubernetes. Configuration is applied by vnf-agent. +| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic +| ... | at line rate and reports total received/sent packets over trial period. +| ... | TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, 254 flows per flow-group) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static +| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +# X520-DA2 bandwidth limit +| ${s_limit} | ${10000000000} +# SFC profile +| ${sfc_profile} | configmaps/eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral +# Traffic profile: +| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 +# CPU settings +| ${system_cpus}= | ${1} +| ${vswitch_cpus}= | ${5} +| ${vnf_cpus}= | ${2} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs Container orchestrated config. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ +| | ... | trial throughput test. +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo +| | ... | ${s_limit} | ${framesize} +| | ... +| | ${dut1_if1_name}= | Get interface name | ${dut1} | ${dut1_if1} +| | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2} +| | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1} +| | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2} +| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} +| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} +| | Create Kubernetes VSWITCH startup config on all DUTs +| | ... | ${phy_cores} | ${rxq} | ${jumbo} +| | Create Kubernetes VNF'1' startup config on all DUTs +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vswitch-vpp-cfg | vpp.conf=/tmp/vswitch.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf1-vpp-cfg | vpp.conf=/tmp/vnf1.conf +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut1_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut1_if2_name} +| | Apply Kubernetes resource on node | ${dut2} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut2_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut2_if2_name} +| | Wait for Kubernetes PODs on all DUTs | ${nodes} | csit +| | Set Kubernetes PODs affinity on all DUTs | ${nodes} +| | Then Traffic should pass with maximum rate +| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} + +*** Test Cases *** +| tc01-64B-1c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-mrr +| | [Tags] | 64B | 1C +| | framesize=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-mrr +| | [Tags] | 64B | 2C +| | framesize=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-mrr +| | [Tags] | 64B | 4C +| | framesize=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-mrr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-mrr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-mrr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-mrr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-mrr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-mrr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-mrr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-mrr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-mrr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr.robot b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr.robot index 3dd36bee90..a7108f34cd 100644 --- a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr.robot +++ b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2017 Cisco and/or its affiliates. +# Copyright (c) 2018 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -45,7 +45,7 @@ | ... | of packets transmitted. NDR and PDR are discovered for different | ... | Ethernet L2 frame sizes using MLRsearch library. | ... | TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 253 flows per flow-group) with all packets +| ... | (flow-group per direction, 254 flows per flow-group) with all packets | ... | containing Ethernet header, IPv4 header with IP protocol=61 and static | ... | payload. MAC addresses are matching MAC addresses of the TG node | ... | interfaces. @@ -160,4 +160,3 @@ | tc12-IMIX-4c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr | | [Tags] | IMIX | 4C | | framesize=IMIX_v4_1 | phy_cores=${4} - diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-mrr.robot b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-mrr.robot new file mode 100644 index 0000000000..674a62b12a --- /dev/null +++ b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-mrr.robot @@ -0,0 +1,165 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR +| ... | NIC_Intel-X520-DA2 | ETH | L2XCFWD | SCALE | L2XCBASE | MEMIF +| ... | K8S | 1VSWITCH | 2VNF | VPP_AGENT | SFC_CONTROLLER | HORIZONTAL +| ... +| Suite Setup | Set up 3-node performance topology with DUT's NIC model +| ... | L2 | Intel-X520-DA2 +| ... +| Test Setup | Set up performance test with Ligato Kubernetes +| ... +| Suite Teardown | Tear down 3-node performance topology +| ... +| Test Teardown | Tear down performance test with Ligato Kubernetes +| ... +| Test Template | Local Template +| ... +| Documentation | *RFC2544: Pkt throughput L2XC test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross- +| ... | connect. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel. +| ... | VNF Containers are connected to VSWITCH container via Memif interface. +| ... | All containers are running same VPP version. Containers are deployed +| ... | with Kubernetes. Configuration is applied by vnf-agent. +| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic +| ... | at line rate and reports total received/sent packets over trial period. +| ... | TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, 254 flows per flow-group) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static +| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +# X520-DA2 bandwidth limit +| ${s_limit} | ${10000000000} +# SFC profile +| ${sfc_profile} | configmaps/eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz +# Traffic profile: +| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 +# CPU settings +| ${system_cpus}= | ${1} +| ${vswitch_cpus}= | ${5} +| ${vnf_cpus}= | ${2} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs Container orchestrated config. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ +| | ... | trial throughput test. +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo +| | ... | ${s_limit} | ${framesize} +| | ... +| | ${dut1_if1_name}= | Get interface name | ${dut1} | ${dut1_if1} +| | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2} +| | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1} +| | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2} +| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} +| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} +| | Create Kubernetes VSWITCH startup config on all DUTs +| | ... | ${phy_cores} | ${rxq} | ${jumbo} +| | Create Kubernetes VNF'1' startup config on all DUTs +| | Create Kubernetes VNF'2' startup config on all DUTs +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vswitch-vpp-cfg | vpp.conf=/tmp/vswitch.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf1-vpp-cfg | vpp.conf=/tmp/vnf1.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf2-vpp-cfg | vpp.conf=/tmp/vnf2.conf +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut1_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut1_if2_name} +| | Apply Kubernetes resource on node | ${dut2} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut2_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut2_if2_name} +| | Wait for Kubernetes PODs on all DUTs | ${nodes} | csit +| | Set Kubernetes PODs affinity on all DUTs | ${nodes} +| | Then Traffic should pass with maximum rate +| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} + +*** Test Cases *** +| tc01-64B-1c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-mrr +| | [Tags] | 64B | 1C +| | framesize=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-mrr +| | [Tags] | 64B | 2C +| | framesize=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-mrr +| | [Tags] | 64B | 4C +| | framesize=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-mrr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-mrr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-mrr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-mrr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-mrr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-mrr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-mrr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-mrr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-mrr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr.robot b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr.robot index dbf21524ba..7e72874cf7 100644 --- a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr.robot +++ b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2017 Cisco and/or its affiliates. +# Copyright (c) 2018 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -45,7 +45,7 @@ | ... | of packets transmitted. NDR and PDR are discovered for different | ... | Ethernet L2 frame sizes using MLRsearch library. | ... | TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 253 flows per flow-group) with all packets +| ... | (flow-group per direction, 254 flows per flow-group) with all packets | ... | containing Ethernet header, IPv4 header with IP protocol=61 and static | ... | payload. MAC addresses are matching MAC addresses of the TG node | ... | interfaces. @@ -167,4 +167,3 @@ | tc12-IMIX-4c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr | | [Tags] | IMIX | 4C | | framesize=IMIX_v4_1 | phy_cores=${4} - diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-mrr.robot b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-mrr.robot new file mode 100644 index 0000000000..bb4e30b495 --- /dev/null +++ b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-mrr.robot @@ -0,0 +1,179 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR +| ... | NIC_Intel-X520-DA2 | ETH | L2XCFWD | SCALE | L2XCBASE | MEMIF +| ... | K8S | 1VSWITCH | 4VNF | VPP_AGENT | SFC_CONTROLLER | HORIZONTAL +| ... +| Suite Setup | Set up 3-node performance topology with DUT's NIC model +| ... | L2 | Intel-X520-DA2 +| ... +| Test Setup | Set up performance test with Ligato Kubernetes +| ... +| Suite Teardown | Tear down 3-node performance topology +| ... +| Test Teardown | Tear down performance test with Ligato Kubernetes +| ... +| Test Template | Local Template +| ... +| Documentation | *RFC2544: Pkt throughput L2XC test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross- +| ... | connect. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel. +| ... | VNF Containers are connected to VSWITCH container via Memif interface. +| ... | All containers are running same VPP version. Containers are deployed +| ... | with Kubernetes. Configuration is applied by vnf-agent. +| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic +| ... | at line rate and reports total received/sent packets over trial period. +| ... | TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, 254 flows per flow-group) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static +| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +# X520-DA2 bandwidth limit +| ${s_limit} | ${10000000000} +# SFC profile +| ${sfc_profile} | configmaps/eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz +# Traffic profile: +| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 +# CPU settings +| ${system_cpus}= | ${1} +| ${vswitch_cpus}= | ${5} +| ${vnf_cpus}= | ${2} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs Container orchestrated config. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ +| | ... | trial throughput test. +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo +| | ... | ${s_limit} | ${framesize} +| | ... +| | ${dut1_if1_name}= | Get interface name | ${dut1} | ${dut1_if1} +| | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2} +| | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1} +| | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2} +| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} +| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} +| | Create Kubernetes VSWITCH startup config on all DUTs +| | ... | ${phy_cores} | ${rxq} | ${jumbo} +| | Create Kubernetes VNF'1' startup config on all DUTs +| | Create Kubernetes VNF'2' startup config on all DUTs +| | Create Kubernetes VNF'3' startup config on all DUTs +| | Create Kubernetes VNF'4' startup config on all DUTs +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vswitch-vpp-cfg | vpp.conf=/tmp/vswitch.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf1-vpp-cfg | vpp.conf=/tmp/vnf1.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf2-vpp-cfg | vpp.conf=/tmp/vnf2.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf3-vpp-cfg | vpp.conf=/tmp/vnf3.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf4-vpp-cfg | vpp.conf=/tmp/vnf4.conf +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf3 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf3 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf4 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf4 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut1_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut1_if2_name} +| | Apply Kubernetes resource on node | ${dut2} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut2_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut2_if2_name} +| | Wait for Kubernetes PODs on all DUTs | ${nodes} | csit +| | Set Kubernetes PODs affinity on all DUTs | ${nodes} +| | Then Traffic should pass with maximum rate +| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} + +*** Test Cases *** +| tc01-64B-1c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-mrr +| | [Tags] | 64B | 1C +| | framesize=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-mrr +| | [Tags] | 64B | 2C +| | framesize=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-mrr +| | [Tags] | 64B | 4C +| | framesize=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-mrr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-mrr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-mrr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-mrr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-mrr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-mrr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-mrr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-mrr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-mrr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr.robot b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr.robot index b77304658b..aedd30ed05 100644 --- a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr.robot +++ b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2017 Cisco and/or its affiliates. +# Copyright (c) 2018 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -45,7 +45,7 @@ | ... | of packets transmitted. NDR and PDR are discovered for different | ... | Ethernet L2 frame sizes using MLRsearch library. | ... | TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 253 flows per flow-group) with all packets +| ... | (flow-group per direction, 254 flows per flow-group) with all packets | ... | containing Ethernet header, IPv4 header with IP protocol=61 and static | ... | payload. MAC addresses are matching MAC addresses of the TG node | ... | interfaces. @@ -181,4 +181,3 @@ | tc12-IMIX-4c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr | | [Tags] | IMIX | 4C | | framesize=IMIX_v4_1 | phy_cores=${4} - diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-mrr.robot b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-mrr.robot new file mode 100644 index 0000000000..aa13ab4efc --- /dev/null +++ b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-mrr.robot @@ -0,0 +1,165 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR +| ... | NIC_Intel-X520-DA2 | ETH | L2XCFWD | SCALE | L2XCBASE | MEMIF +| ... | K8S | 1VSWITCH | 2VNF | VPP_AGENT | SFC_CONTROLLER | CHAIN +| ... +| Suite Setup | Set up 3-node performance topology with DUT's NIC model +| ... | L2 | Intel-X520-DA2 +| ... +| Test Setup | Set up performance test with Ligato Kubernetes +| ... +| Suite Teardown | Tear down 3-node performance topology +| ... +| Test Teardown | Tear down performance test with Ligato Kubernetes +| ... +| Test Template | Local Template +| ... +| Documentation | *RFC2544: Pkt throughput L2XC test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross- +| ... | connect. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel. +| ... | VNF Containers are connected to VSWITCH container via Memif interface. +| ... | All containers are running same VPP version. Containers are deployed +| ... | with Kubernetes. Configuration is applied by vnf-agent. +| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic +| ... | at line rate and reports total received/sent packets over trial period. +| ... | TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, 254 flows per flow-group) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static +| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +# X520-DA2 bandwidth limit +| ${s_limit} | ${10000000000} +# SFC profile +| ${sfc_profile} | configmaps/eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain +# Traffic profile: +| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 +# CPU settings +| ${system_cpus}= | ${1} +| ${vswitch_cpus}= | ${5} +| ${vnf_cpus}= | ${2} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs Container orchestrated config. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ +| | ... | trial throughput test. +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo +| | ... | ${s_limit} | ${framesize} +| | ... +| | ${dut1_if1_name}= | Get interface name | ${dut1} | ${dut1_if1} +| | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2} +| | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1} +| | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2} +| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} +| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} +| | Create Kubernetes VSWITCH startup config on all DUTs +| | ... | ${phy_cores} | ${rxq} | ${jumbo} +| | Create Kubernetes VNF'1' startup config on all DUTs +| | Create Kubernetes VNF'2' startup config on all DUTs +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vswitch-vpp-cfg | vpp.conf=/tmp/vswitch.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf1-vpp-cfg | vpp.conf=/tmp/vnf1.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf2-vpp-cfg | vpp.conf=/tmp/vnf2.conf +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut1_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut1_if2_name} +| | Apply Kubernetes resource on node | ${dut2} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut2_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut2_if2_name} +| | Wait for Kubernetes PODs on all DUTs | ${nodes} | csit +| | Set Kubernetes PODs affinity on all DUTs | ${nodes} +| | Then Traffic should pass with maximum rate +| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} + +*** Test Cases *** +| tc01-64B-1c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-mrr +| | [Tags] | 64B | 1C +| | framesize=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-mrr +| | [Tags] | 64B | 2C +| | framesize=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-mrr +| | [Tags] | 64B | 4C +| | framesize=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-mrr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-mrr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-mrr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-mrr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-mrr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-mrr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-mrr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-mrr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-mrr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr.robot b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr.robot index e83b16d124..e4eff118bc 100644 --- a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr.robot +++ b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2017 Cisco and/or its affiliates. +# Copyright (c) 2018 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -45,7 +45,7 @@ | ... | of packets transmitted. NDR and PDR are discovered for different | ... | Ethernet L2 frame sizes using MLRsearch library. | ... | TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 253 flows per flow-group) with all packets +| ... | (flow-group per direction, 254 flows per flow-group) with all packets | ... | containing Ethernet header, IPv4 header with IP protocol=61 and static | ... | payload. MAC addresses are matching MAC addresses of the TG node | ... | interfaces. @@ -167,4 +167,3 @@ | tc12-IMIX-4c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr | | [Tags] | IMIX | 4C | | framesize=IMIX_v4_1 | phy_cores=${4} - diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-mrr.robot b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-mrr.robot new file mode 100644 index 0000000000..0fc57d56c5 --- /dev/null +++ b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-mrr.robot @@ -0,0 +1,179 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR +| ... | NIC_Intel-X520-DA2 | ETH | L2XCFWD | SCALE | L2XCBASE | MEMIF +| ... | K8S | 1VSWITCH | 4VNF | VPP_AGENT | SFC_CONTROLLER | CHAIN +| ... +| Suite Setup | Set up 3-node performance topology with DUT's NIC model +| ... | L2 | Intel-X520-DA2 +| ... +| Test Setup | Set up performance test with Ligato Kubernetes +| ... +| Suite Teardown | Tear down 3-node performance topology +| ... +| Test Teardown | Tear down performance test with Ligato Kubernetes +| ... +| Test Template | Local Template +| ... +| Documentation | *RFC2544: Pkt throughput L2XC test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross- +| ... | connect. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel. +| ... | VNF Containers are connected to VSWITCH container via Memif interface. +| ... | All containers are running same VPP version. Containers are deployed +| ... | with Kubernetes. Configuration is applied by vnf-agent. +| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic +| ... | at line rate and reports total received/sent packets over trial period. +| ... | TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, 254 flows per flow-group) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static +| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +# X520-DA2 bandwidth limit +| ${s_limit} | ${10000000000} +# SFC profile +| ${sfc_profile} | configmaps/eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain +# Traffic profile: +| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 +# CPU settings +| ${system_cpus}= | ${1} +| ${vswitch_cpus}= | ${5} +| ${vnf_cpus}= | ${2} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs Container orchestrated config. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ +| | ... | trial throughput test. +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo +| | ... | ${s_limit} | ${framesize} +| | ... +| | ${dut1_if1_name}= | Get interface name | ${dut1} | ${dut1_if1} +| | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2} +| | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1} +| | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2} +| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} +| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} +| | Create Kubernetes VSWITCH startup config on all DUTs +| | ... | ${phy_cores} | ${rxq} | ${jumbo} +| | Create Kubernetes VNF'1' startup config on all DUTs +| | Create Kubernetes VNF'2' startup config on all DUTs +| | Create Kubernetes VNF'3' startup config on all DUTs +| | Create Kubernetes VNF'4' startup config on all DUTs +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vswitch-vpp-cfg | vpp.conf=/tmp/vswitch.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf1-vpp-cfg | vpp.conf=/tmp/vnf1.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf2-vpp-cfg | vpp.conf=/tmp/vnf2.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf3-vpp-cfg | vpp.conf=/tmp/vnf3.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf4-vpp-cfg | vpp.conf=/tmp/vnf4.conf +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf3 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf3 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf4 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf4 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut1_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut1_if2_name} +| | Apply Kubernetes resource on node | ${dut2} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut2_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut2_if2_name} +| | Wait for Kubernetes PODs on all DUTs | ${nodes} | csit +| | Set Kubernetes PODs affinity on all DUTs | ${nodes} +| | Then Traffic should pass with maximum rate +| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} + +*** Test Cases *** +| tc01-64B-1c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-mrr +| | [Tags] | 64B | 1C +| | framesize=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-mrr +| | [Tags] | 64B | 2C +| | framesize=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-mrr +| | [Tags] | 64B | 4C +| | framesize=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-mrr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-mrr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-mrr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-mrr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-mrr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-mrr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-mrr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-mrr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-mrr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr.robot b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr.robot index 2a35d960f2..c0c9e5d9dc 100644 --- a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr.robot +++ b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2017 Cisco and/or its affiliates. +# Copyright (c) 2018 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -45,7 +45,7 @@ | ... | of packets transmitted. NDR and PDR are discovered for different | ... | Ethernet L2 frame sizes using MLRsearch library. | ... | TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 253 flows per flow-group) with all packets +| ... | (flow-group per direction, 254 flows per flow-group) with all packets | ... | containing Ethernet header, IPv4 header with IP protocol=61 and static | ... | payload. MAC addresses are matching MAC addresses of the TG node | ... | interfaces. @@ -181,4 +181,3 @@ | tc12-IMIX-4c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr | | [Tags] | IMIX | 4C | | framesize=IMIX_v4_1 | phy_cores=${4} - diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-mrr.robot b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-mrr.robot new file mode 100644 index 0000000000..4902d2d40c --- /dev/null +++ b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-mrr.robot @@ -0,0 +1,159 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR +| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | L2BDBASE | BASE | MEMIF +| ... | K8S | 1VSWITCH | 1VNF | VPP_AGENT | SFC_CONTROLLER | PARALLEL +| ... +| Suite Setup | Set up 3-node performance topology with DUT's NIC model +| ... | L2 | Intel-X710 +| ... +| Test Setup | Set up performance test with Ligato Kubernetes +| ... +| Suite Teardown | Tear down 3-node performance topology +| ... +| Test Teardown | Tear down performance test with Ligato Kubernetes +| ... +| Test Template | Local Template +| ... +| Documentation | *RFC2544: Pkt throughput L2BD test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with two L2 +| ... | bridge domains and MAC learning enabled. DUT1 and DUT2 tested with +| ... | 2p10GE NIC X710 by Intel. +| ... | VNF Container is connected to VSWITCH container via Memif interface. All +| ... | containers is running same VPP version. Containers are deployed with +| ... | Kubernetes. Configuration is applied by vnf-agent. +| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic +| ... | at line rate and reports total received/sent packets over trial period. +| ... | TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, 254 flows per flow-group) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static +| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +# X710 bandwidth limit +| ${s_limit} | ${10000000000} +# SFC profile +| ${sfc_profile} | configmaps/eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral +# Traffic profile: +| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 +# CPU settings +| ${system_cpus}= | ${1} +| ${vswitch_cpus}= | ${5} +| ${vnf_cpus}= | ${2} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs Container orchestrated config. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ +| | ... | trial throughput test. +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo +| | ... | ${s_limit} | ${framesize} +| | ... +| | ${dut1_if1_name}= | Get interface name | ${dut1} | ${dut1_if1} +| | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2} +| | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1} +| | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2} +| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} +| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} +| | Create Kubernetes VSWITCH startup config on all DUTs +| | ... | ${phy_cores} | ${rxq} | ${jumbo} +| | Create Kubernetes VNF'1' startup config on all DUTs +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vswitch-vpp-cfg | vpp.conf=/tmp/vswitch.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf1-vpp-cfg | vpp.conf=/tmp/vnf1.conf +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut1_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut1_if2_name} +| | Apply Kubernetes resource on node | ${dut2} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut2_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut2_if2_name} +| | Wait for Kubernetes PODs on all DUTs | ${nodes} | csit +| | Set Kubernetes PODs affinity on all DUTs | ${nodes} +| | Then Traffic should pass with maximum rate +| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} + +*** Test Cases *** +| tc01-64B-1c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-mrr +| | [Tags] | 64B | 1C +| | framesize=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-mrr +| | [Tags] | 64B | 2C +| | framesize=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-mrr +| | [Tags] | 64B | 4C +| | framesize=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-mrr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-mrr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-mrr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-mrr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-mrr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-mrr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-mrr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-mrr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-mrr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr.robot b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr.robot index 02dc99027e..45d0a8d303 100644 --- a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr.robot +++ b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2017 Cisco and/or its affiliates. +# Copyright (c) 2018 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -46,7 +46,7 @@ | ... | of packets transmitted. NDR and PDR are discovered for different | ... | Ethernet L2 frame sizes using MLRsearch library. | ... | TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 253 flows per flow-group) with all packets +| ... | (flow-group per direction, 254 flows per flow-group) with all packets | ... | containing Ethernet header, IPv4 header with IP protocol=61 and static | ... | payload. MAC addresses are matching MAC addresses of the TG node | ... | interfaces. @@ -161,4 +161,3 @@ | tc12-IMIX-4c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr | | [Tags] | IMIX | 4C | | framesize=IMIX_v4_1 | phy_cores=${4} - diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-mrr.robot b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-mrr.robot new file mode 100644 index 0000000000..8531db05be --- /dev/null +++ b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-mrr.robot @@ -0,0 +1,166 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR +| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | L2BDBASE | SCALE | MEMIF +| ... | K8S | 1VSWITCH | 2VNF | VPP_AGENT | SFC_CONTROLLER | HORIZONTAL +| ... +| Suite Setup | Set up 3-node performance topology with DUT's NIC model +| ... | L2 | Intel-X710 +| ... +| Test Setup | Set up performance test with Ligato Kubernetes +| ... +| Suite Teardown | Tear down 3-node performance topology +| ... +| Test Teardown | Tear down performance test with Ligato Kubernetes +| ... +| Test Template | Local Template +| ... +| Documentation | *RFC2544: Pkt throughput L2BD test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with two L2 +| ... | bridge domains and MAC learning enabled. DUT1 and DUT2 tested with +| ... | 2p10GE NIC X710 by Intel. +| ... | VNF Containers are connected to VSWITCH container via Memif interface. +| ... | All containers are running same VPP version. Containers are deployed +| ... | with Kubernetes. Configuration is applied by vnf-agent. +| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic +| ... | at line rate and reports total received/sent packets over trial period. +| ... | TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, 254 flows per flow-group) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static +| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +# X710 bandwidth limit +| ${s_limit} | ${10000000000} +# SFC profile +| ${sfc_profile} | configmaps/eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz +# Traffic profile: +| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 +# CPU settings +| ${system_cpus}= | ${1} +| ${vswitch_cpus}= | ${5} +| ${vnf_cpus}= | ${2} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs Container orchestrated config. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ +| | ... | trial throughput test. +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo +| | ... | ${s_limit} | ${framesize} +| | ... +| | ${dut1_if1_name}= | Get interface name | ${dut1} | ${dut1_if1} +| | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2} +| | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1} +| | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2} +| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} +| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} +| | Create Kubernetes VSWITCH startup config on all DUTs +| | ... | ${phy_cores} | ${rxq} | ${jumbo} +| | Create Kubernetes VNF'1' startup config on all DUTs +| | Create Kubernetes VNF'2' startup config on all DUTs +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vswitch-vpp-cfg | vpp.conf=/tmp/vswitch.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf1-vpp-cfg | vpp.conf=/tmp/vnf1.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf2-vpp-cfg | vpp.conf=/tmp/vnf2.conf +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut1_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut1_if2_name} +| | Apply Kubernetes resource on node | ${dut2} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut2_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut2_if2_name} +| | Wait for Kubernetes PODs on all DUTs | ${nodes} | csit +| | Set Kubernetes PODs affinity on all DUTs | ${nodes} +| | Then Traffic should pass with maximum rate +| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} + +*** Test Cases *** +| tc01-64B-1c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-mrr +| | [Tags] | 64B | 1C +| | framesize=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-mrr +| | [Tags] | 64B | 2C +| | framesize=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-mrr +| | [Tags] | 64B | 4C +| | framesize=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-mrr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-mrr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-mrr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-mrr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-mrr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-mrr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-mrr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-mrr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-mrr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr.robot b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr.robot index 10d2f4d9c2..4990e123ae 100644 --- a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr.robot +++ b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2017 Cisco and/or its affiliates. +# Copyright (c) 2018 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -46,7 +46,7 @@ | ... | of packets transmitted. NDR and PDR are discovered for different | ... | Ethernet L2 frame sizes using MLRsearch library. | ... | TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 253 flows per flow-group) with all packets +| ... | (flow-group per direction, 254 flows per flow-group) with all packets | ... | containing Ethernet header, IPv4 header with IP protocol=61 and static | ... | payload. MAC addresses are matching MAC addresses of the TG node | ... | interfaces. @@ -168,4 +168,3 @@ | tc12-IMIX-4c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr | | [Tags] | IMIX | 4C | | framesize=IMIX_v4_1 | phy_cores=${4} - diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-mrr.robot b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-mrr.robot new file mode 100644 index 0000000000..bd9a9c979d --- /dev/null +++ b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-mrr.robot @@ -0,0 +1,180 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR +| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | L2BDBASE | SCALE | MEMIF +| ... | K8S | 1VSWITCH | 4VNF | VPP_AGENT | SFC_CONTROLLER | HORIZONTAL +| ... +| Suite Setup | Set up 3-node performance topology with DUT's NIC model +| ... | L2 | Intel-X710 +| ... +| Test Setup | Set up performance test with Ligato Kubernetes +| ... +| Suite Teardown | Tear down 3-node performance topology +| ... +| Test Teardown | Tear down performance test with Ligato Kubernetes +| ... +| Test Template | Local Template +| ... +| Documentation | *RFC2544: Pkt throughput L2BD test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with two L2 +| ... | bridge domains and MAC learning enabled. DUT1 and DUT2 tested with +| ... | 2p10GE NIC X710 by Intel. +| ... | VNF Containers are connected to VSWITCH container via Memif interface. +| ... | All containers are running same VPP version. Containers are deployed +| ... | with Kubernetes. Configuration is applied by vnf-agent. +| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic +| ... | at line rate and reports total received/sent packets over trial period. +| ... | TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, 254 flows per flow-group) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static +| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +# X710 bandwidth limit +| ${s_limit} | ${10000000000} +# SFC profile +| ${sfc_profile} | configmaps/eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz +# Traffic profile: +| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 +# CPU settings +| ${system_cpus}= | ${1} +| ${vswitch_cpus}= | ${5} +| ${vnf_cpus}= | ${2} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs Container orchestrated config. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ +| | ... | trial throughput test. +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo +| | ... | ${s_limit} | ${framesize} +| | ... +| | ${dut1_if1_name}= | Get interface name | ${dut1} | ${dut1_if1} +| | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2} +| | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1} +| | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2} +| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} +| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} +| | Create Kubernetes VSWITCH startup config on all DUTs +| | ... | ${phy_cores} | ${rxq} | ${jumbo} +| | Create Kubernetes VNF'1' startup config on all DUTs +| | Create Kubernetes VNF'2' startup config on all DUTs +| | Create Kubernetes VNF'3' startup config on all DUTs +| | Create Kubernetes VNF'4' startup config on all DUTs +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vswitch-vpp-cfg | vpp.conf=/tmp/vswitch.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf1-vpp-cfg | vpp.conf=/tmp/vnf1.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf2-vpp-cfg | vpp.conf=/tmp/vnf2.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf3-vpp-cfg | vpp.conf=/tmp/vnf3.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf4-vpp-cfg | vpp.conf=/tmp/vnf4.conf +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf3 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf3 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf4 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf4 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut1_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut1_if2_name} +| | Apply Kubernetes resource on node | ${dut2} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut2_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut2_if2_name} +| | Wait for Kubernetes PODs on all DUTs | ${nodes} | csit +| | Set Kubernetes PODs affinity on all DUTs | ${nodes} +| | Then Traffic should pass with maximum rate +| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} + +*** Test Cases *** +| tc01-64B-1c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-mrr +| | [Tags] | 64B | 1C +| | framesize=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-mrr +| | [Tags] | 64B | 2C +| | framesize=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-mrr +| | [Tags] | 64B | 4C +| | framesize=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-mrr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-mrr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-mrr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-mrr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-mrr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-mrr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-mrr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-mrr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-mrr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr.robot b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr.robot index afead74273..891669edd6 100644 --- a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr.robot +++ b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2017 Cisco and/or its affiliates. +# Copyright (c) 2018 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -46,7 +46,7 @@ | ... | of packets transmitted. NDR and PDR are discovered for different | ... | Ethernet L2 frame sizes using MLRsearch library. | ... | TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 253 flows per flow-group) with all packets +| ... | (flow-group per direction, 254 flows per flow-group) with all packets | ... | containing Ethernet header, IPv4 header with IP protocol=61 and static | ... | payload. MAC addresses are matching MAC addresses of the TG node | ... | interfaces. @@ -182,4 +182,3 @@ | tc12-IMIX-4c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr | | [Tags] | IMIX | 4C | | framesize=IMIX_v4_1 | phy_cores=${4} - diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-mrr.robot b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-mrr.robot new file mode 100644 index 0000000000..c2ad6486c3 --- /dev/null +++ b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-mrr.robot @@ -0,0 +1,166 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR +| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | L2BDBASE | SCALE | MEMIF +| ... | K8S | 1VSWITCH | 2VNF | VPP_AGENT | SFC_CONTROLLER | CHAIN +| ... +| Suite Setup | Set up 3-node performance topology with DUT's NIC model +| ... | L2 | Intel-X710 +| ... +| Test Setup | Set up performance test with Ligato Kubernetes +| ... +| Suite Teardown | Tear down 3-node performance topology +| ... +| Test Teardown | Tear down performance test with Ligato Kubernetes +| ... +| Test Template | Local Template +| ... +| Documentation | *RFC2544: Pkt throughput L2BD test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with two L2 +| ... | bridge domains and MAC learning enabled. DUT1 and DUT2 tested with +| ... | 2p10GE NIC X710 by Intel. +| ... | VNF Containers are connected to VSWITCH container via Memif interface. +| ... | All containers are running same VPP version. Containers are deployed +| ... | with Kubernetes. Configuration is applied by vnf-agent. +| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic +| ... | at line rate and reports total received/sent packets over trial period. +| ... | TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, 254 flows per flow-group) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static +| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +# X710 bandwidth limit +| ${s_limit} | ${10000000000} +# SFC profile +| ${sfc_profile} | configmaps/eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain +# Traffic profile: +| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 +# CPU settings +| ${system_cpus}= | ${1} +| ${vswitch_cpus}= | ${5} +| ${vnf_cpus}= | ${2} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs Container orchestrated config. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ +| | ... | trial throughput test. +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo +| | ... | ${s_limit} | ${framesize} +| | ... +| | ${dut1_if1_name}= | Get interface name | ${dut1} | ${dut1_if1} +| | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2} +| | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1} +| | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2} +| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} +| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} +| | Create Kubernetes VSWITCH startup config on all DUTs +| | ... | ${phy_cores} | ${rxq} | ${jumbo} +| | Create Kubernetes VNF'1' startup config on all DUTs +| | Create Kubernetes VNF'2' startup config on all DUTs +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vswitch-vpp-cfg | vpp.conf=/tmp/vswitch.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf1-vpp-cfg | vpp.conf=/tmp/vnf1.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf2-vpp-cfg | vpp.conf=/tmp/vnf2.conf +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut1_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut1_if2_name} +| | Apply Kubernetes resource on node | ${dut2} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut2_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut2_if2_name} +| | Wait for Kubernetes PODs on all DUTs | ${nodes} | csit +| | Set Kubernetes PODs affinity on all DUTs | ${nodes} +| | Then Traffic should pass with maximum rate +| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} + +*** Test Cases *** +| tc01-64B-1c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-mrr +| | [Tags] | 64B | 1C +| | framesize=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-mrr +| | [Tags] | 64B | 2C +| | framesize=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-mrr +| | [Tags] | 64B | 4C +| | framesize=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-mrr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-mrr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-mrr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-mrr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-mrr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-mrr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-mrr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-mrr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-mrr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr.robot b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr.robot index b0abe57f48..2de586d22a 100644 --- a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr.robot +++ b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2017 Cisco and/or its affiliates. +# Copyright (c) 2018 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -46,7 +46,7 @@ | ... | of packets transmitted. NDR and PDR are discovered for different | ... | Ethernet L2 frame sizes using MLRsearch library. | ... | TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 253 flows per flow-group) with all packets +| ... | (flow-group per direction, 254 flows per flow-group) with all packets | ... | containing Ethernet header, IPv4 header with IP protocol=61 and static | ... | payload. MAC addresses are matching MAC addresses of the TG node | ... | interfaces. @@ -168,4 +168,3 @@ | tc12-IMIX-4c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr | | [Tags] | IMIX | 4C | | framesize=IMIX_v4_1 | phy_cores=${4} - diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-mrr.robot b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-mrr.robot new file mode 100644 index 0000000000..a8b3ea0e5f --- /dev/null +++ b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-mrr.robot @@ -0,0 +1,180 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR +| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | L2BDBASE | SCALE | MEMIF +| ... | K8S | 1VSWITCH | 4VNF | VPP_AGENT | SFC_CONTROLLER | CHAIN +| ... +| Suite Setup | Set up 3-node performance topology with DUT's NIC model +| ... | L2 | Intel-X710 +| ... +| Test Setup | Set up performance test with Ligato Kubernetes +| ... +| Suite Teardown | Tear down 3-node performance topology +| ... +| Test Teardown | Tear down performance test with Ligato Kubernetes +| ... +| Test Template | Local Template +| ... +| Documentation | *RFC2544: Pkt throughput L2BD test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with two L2 +| ... | bridge domains and MAC learning enabled. DUT1 and DUT2 tested with +| ... | 2p10GE NIC X710 by Intel. +| ... | VNF Containers are connected to VSWITCH container via Memif interface. +| ... | All containers are running same VPP version. Containers are deployed +| ... | with Kubernetes. Configuration is applied by vnf-agent. +| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic +| ... | at line rate and reports total received/sent packets over trial period. +| ... | TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, 254 flows per flow-group) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static +| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +# X710 bandwidth limit +| ${s_limit} | ${10000000000} +# SFC profile +| ${sfc_profile} | configmaps/eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain +# Traffic profile: +| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 +# CPU settings +| ${system_cpus}= | ${1} +| ${vswitch_cpus}= | ${5} +| ${vnf_cpus}= | ${2} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs Container orchestrated config. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ +| | ... | trial throughput test. +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo +| | ... | ${s_limit} | ${framesize} +| | ... +| | ${dut1_if1_name}= | Get interface name | ${dut1} | ${dut1_if1} +| | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2} +| | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1} +| | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2} +| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} +| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} +| | Create Kubernetes VSWITCH startup config on all DUTs +| | ... | ${phy_cores} | ${rxq} | ${jumbo} +| | Create Kubernetes VNF'1' startup config on all DUTs +| | Create Kubernetes VNF'2' startup config on all DUTs +| | Create Kubernetes VNF'3' startup config on all DUTs +| | Create Kubernetes VNF'4' startup config on all DUTs +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vswitch-vpp-cfg | vpp.conf=/tmp/vswitch.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf1-vpp-cfg | vpp.conf=/tmp/vnf1.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf2-vpp-cfg | vpp.conf=/tmp/vnf2.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf3-vpp-cfg | vpp.conf=/tmp/vnf3.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf4-vpp-cfg | vpp.conf=/tmp/vnf4.conf +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf3 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf3 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf4 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf4 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut1_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut1_if2_name} +| | Apply Kubernetes resource on node | ${dut2} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut2_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut2_if2_name} +| | Wait for Kubernetes PODs on all DUTs | ${nodes} | csit +| | Set Kubernetes PODs affinity on all DUTs | ${nodes} +| | Then Traffic should pass with maximum rate +| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} + +*** Test Cases *** +| tc01-64B-1c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-mrr +| | [Tags] | 64B | 1C +| | framesize=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-mrr +| | [Tags] | 64B | 2C +| | framesize=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-mrr +| | [Tags] | 64B | 4C +| | framesize=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-mrr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-mrr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-mrr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-mrr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-mrr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-mrr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-mrr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-mrr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-mrr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr.robot b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr.robot index 93e5747e8a..a487589f3a 100644 --- a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr.robot +++ b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2017 Cisco and/or its affiliates. +# Copyright (c) 2018 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -46,7 +46,7 @@ | ... | of packets transmitted. NDR and PDR are discovered for different | ... | Ethernet L2 frame sizes using MLRsearch library. | ... | TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 253 flows per flow-group) with all packets +| ... | (flow-group per direction, 254 flows per flow-group) with all packets | ... | containing Ethernet header, IPv4 header with IP protocol=61 and static | ... | payload. MAC addresses are matching MAC addresses of the TG node | ... | interfaces. @@ -182,4 +182,3 @@ | tc12-IMIX-4c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr | | [Tags] | IMIX | 4C | | framesize=IMIX_v4_1 | phy_cores=${4} - diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-mrr.robot b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-mrr.robot new file mode 100644 index 0000000000..850c22f087 --- /dev/null +++ b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-mrr.robot @@ -0,0 +1,158 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR +| ... | NIC_Intel-X710 | ETH | L2XCFWD | BASE | L2XCBASE | MEMIF +| ... | K8S | 1VSWITCH | 1VNF | VPP_AGENT | SFC_CONTROLLER | PARALLEL +| ... +| Suite Setup | Set up 3-node performance topology with DUT's NIC model +| ... | L2 | Intel-X710 +| ... +| Test Setup | Set up performance test with Ligato Kubernetes +| ... +| Suite Teardown | Tear down 3-node performance topology +| ... +| Test Teardown | Tear down performance test with Ligato Kubernetes +| ... +| Test Template | Local Template +| ... +| Documentation | *RFC2544: Pkt throughput L2XC test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross- +| ... | connect. DUT1 and DUT2 tested with 2p10GE NIC X710 by Intel. +| ... | VNF Container is connected to VSWITCH container via Memif interface. All +| ... | containers is running same VPP version. Containers are deployed with +| ... | Kubernetes. Configuration is applied by vnf-agent. +| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic +| ... | at line rate and reports total received/sent packets over trial period. +| ... | TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, 254 flows per flow-group) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static +| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +# X710 bandwidth limit +| ${s_limit} | ${10000000000} +# SFC profile +| ${sfc_profile} | configmaps/eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral +# Traffic profile: +| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 +# CPU settings +| ${system_cpus}= | ${1} +| ${vswitch_cpus}= | ${5} +| ${vnf_cpus}= | ${2} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs Container orchestrated config. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ +| | ... | trial throughput test. +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo +| | ... | ${s_limit} | ${framesize} +| | ... +| | ${dut1_if1_name}= | Get interface name | ${dut1} | ${dut1_if1} +| | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2} +| | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1} +| | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2} +| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} +| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} +| | Create Kubernetes VSWITCH startup config on all DUTs +| | ... | ${phy_cores} | ${rxq} | ${jumbo} +| | Create Kubernetes VNF'1' startup config on all DUTs +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vswitch-vpp-cfg | vpp.conf=/tmp/vswitch.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf1-vpp-cfg | vpp.conf=/tmp/vnf1.conf +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut1_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut1_if2_name} +| | Apply Kubernetes resource on node | ${dut2} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut2_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut2_if2_name} +| | Wait for Kubernetes PODs on all DUTs | ${nodes} | csit +| | Set Kubernetes PODs affinity on all DUTs | ${nodes} +| | Then Traffic should pass with maximum rate +| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} + +*** Test Cases *** +| tc01-64B-1c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-mrr +| | [Tags] | 64B | 1C +| | framesize=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-mrr +| | [Tags] | 64B | 2C +| | framesize=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-mrr +| | [Tags] | 64B | 4C +| | framesize=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-mrr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-mrr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-mrr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-mrr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-mrr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-mrr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-mrr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-mrr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-mrr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr.robot b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr.robot index 70a66a2cf4..5a5adbe38b 100644 --- a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr.robot +++ b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2017 Cisco and/or its affiliates. +# Copyright (c) 2018 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -45,7 +45,7 @@ | ... | of packets transmitted. NDR and PDR are discovered for different | ... | Ethernet L2 frame sizes using MLRsearch library. | ... | TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 253 flows per flow-group) with all packets +| ... | (flow-group per direction, 254 flows per flow-group) with all packets | ... | containing Ethernet header, IPv4 header with IP protocol=61 and static | ... | payload. MAC addresses are matching MAC addresses of the TG node | ... | interfaces. @@ -160,4 +160,3 @@ | tc12-IMIX-4c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr | | [Tags] | IMIX | 4C | | framesize=IMIX_v4_1 | phy_cores=${4} - diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-mrr.robot b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-mrr.robot new file mode 100644 index 0000000000..f7880eed54 --- /dev/null +++ b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-mrr.robot @@ -0,0 +1,165 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR +| ... | NIC_Intel-X710 | ETH | L2XCFWD | SCALE | L2XCBASE | MEMIF +| ... | K8S | 1VSWITCH | 2VNF | VPP_AGENT | SFC_CONTROLLER | HORIZONTAL +| ... +| Suite Setup | Set up 3-node performance topology with DUT's NIC model +| ... | L2 | Intel-X710 +| ... +| Test Setup | Set up performance test with Ligato Kubernetes +| ... +| Suite Teardown | Tear down 3-node performance topology +| ... +| Test Teardown | Tear down performance test with Ligato Kubernetes +| ... +| Test Template | Local Template +| ... +| Documentation | *RFC2544: Pkt throughput L2XC test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross- +| ... | connect. DUT1 and DUT2 tested with 2p10GE NIC X710 by Intel. +| ... | VNF Containers are connected to VSWITCH container via Memif interface. +| ... | All containers are running same VPP version. Containers are deployed +| ... | with Kubernetes. Configuration is applied by vnf-agent. +| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic +| ... | at line rate and reports total received/sent packets over trial period. +| ... | TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, 254 flows per flow-group) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static +| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +# X710 bandwidth limit +| ${s_limit} | ${10000000000} +# SFC profile +| ${sfc_profile} | configmaps/eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz +# Traffic profile: +| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 +# CPU settings +| ${system_cpus}= | ${1} +| ${vswitch_cpus}= | ${5} +| ${vnf_cpus}= | ${2} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs Container orchestrated config. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ +| | ... | trial throughput test. +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo +| | ... | ${s_limit} | ${framesize} +| | ... +| | ${dut1_if1_name}= | Get interface name | ${dut1} | ${dut1_if1} +| | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2} +| | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1} +| | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2} +| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} +| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} +| | Create Kubernetes VSWITCH startup config on all DUTs +| | ... | ${phy_cores} | ${rxq} | ${jumbo} +| | Create Kubernetes VNF'1' startup config on all DUTs +| | Create Kubernetes VNF'2' startup config on all DUTs +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vswitch-vpp-cfg | vpp.conf=/tmp/vswitch.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf1-vpp-cfg | vpp.conf=/tmp/vnf1.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf2-vpp-cfg | vpp.conf=/tmp/vnf2.conf +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut1_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut1_if2_name} +| | Apply Kubernetes resource on node | ${dut2} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut2_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut2_if2_name} +| | Wait for Kubernetes PODs on all DUTs | ${nodes} | csit +| | Set Kubernetes PODs affinity on all DUTs | ${nodes} +| | Then Traffic should pass with maximum rate +| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} + +*** Test Cases *** +| tc01-64B-1c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-mrr +| | [Tags] | 64B | 1C +| | framesize=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-mrr +| | [Tags] | 64B | 2C +| | framesize=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-mrr +| | [Tags] | 64B | 4C +| | framesize=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-mrr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-mrr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-mrr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-mrr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-mrr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-mrr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-mrr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-mrr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-mrr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr.robot b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr.robot index 0298614afd..72bcbab317 100644 --- a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr.robot +++ b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2017 Cisco and/or its affiliates. +# Copyright (c) 2018 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -45,7 +45,7 @@ | ... | of packets transmitted. NDR and PDR are discovered for different | ... | Ethernet L2 frame sizes using MLRsearch library. | ... | TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 253 flows per flow-group) with all packets +| ... | (flow-group per direction, 254 flows per flow-group) with all packets | ... | containing Ethernet header, IPv4 header with IP protocol=61 and static | ... | payload. MAC addresses are matching MAC addresses of the TG node | ... | interfaces. @@ -167,4 +167,3 @@ | tc12-IMIX-4c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr | | [Tags] | IMIX | 4C | | framesize=IMIX_v4_1 | phy_cores=${4} - diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-mrr.robot b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-mrr.robot new file mode 100644 index 0000000000..6f76765ce5 --- /dev/null +++ b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-mrr.robot @@ -0,0 +1,179 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR +| ... | NIC_Intel-X710 | ETH | L2XCFWD | SCALE | L2XCBASE | MEMIF +| ... | K8S | 1VSWITCH | 4VNF | VPP_AGENT | SFC_CONTROLLER | HORIZONTAL +| ... +| Suite Setup | Set up 3-node performance topology with DUT's NIC model +| ... | L2 | Intel-X710 +| ... +| Test Setup | Set up performance test with Ligato Kubernetes +| ... +| Suite Teardown | Tear down 3-node performance topology +| ... +| Test Teardown | Tear down performance test with Ligato Kubernetes +| ... +| Test Template | Local Template +| ... +| Documentation | *RFC2544: Pkt throughput L2XC test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross- +| ... | connect. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel. +| ... | VNF Containers are connected to VSWITCH container via Memif interface. +| ... | All containers are running same VPP version. Containers are deployed +| ... | with Kubernetes. Configuration is applied by vnf-agent. +| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic +| ... | at line rate and reports total received/sent packets over trial period. +| ... | TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, 254 flows per flow-group) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static +| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +# X710 bandwidth limit +| ${s_limit} | ${10000000000} +# SFC profile +| ${sfc_profile} | configmaps/eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz +# Traffic profile: +| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 +# CPU settings +| ${system_cpus}= | ${1} +| ${vswitch_cpus}= | ${5} +| ${vnf_cpus}= | ${2} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs Container orchestrated config. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ +| | ... | trial throughput test. +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo +| | ... | ${s_limit} | ${framesize} +| | ... +| | ${dut1_if1_name}= | Get interface name | ${dut1} | ${dut1_if1} +| | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2} +| | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1} +| | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2} +| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} +| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} +| | Create Kubernetes VSWITCH startup config on all DUTs +| | ... | ${phy_cores} | ${rxq} | ${jumbo} +| | Create Kubernetes VNF'1' startup config on all DUTs +| | Create Kubernetes VNF'2' startup config on all DUTs +| | Create Kubernetes VNF'3' startup config on all DUTs +| | Create Kubernetes VNF'4' startup config on all DUTs +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vswitch-vpp-cfg | vpp.conf=/tmp/vswitch.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf1-vpp-cfg | vpp.conf=/tmp/vnf1.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf2-vpp-cfg | vpp.conf=/tmp/vnf2.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf3-vpp-cfg | vpp.conf=/tmp/vnf3.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf4-vpp-cfg | vpp.conf=/tmp/vnf4.conf +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf3 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf3 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf4 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf4 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut1_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut1_if2_name} +| | Apply Kubernetes resource on node | ${dut2} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut2_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut2_if2_name} +| | Wait for Kubernetes PODs on all DUTs | ${nodes} | csit +| | Set Kubernetes PODs affinity on all DUTs | ${nodes} +| | Then Traffic should pass with maximum rate +| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} + +*** Test Cases *** +| tc01-64B-1c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-mrr +| | [Tags] | 64B | 1C +| | framesize=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-mrr +| | [Tags] | 64B | 2C +| | framesize=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-mrr +| | [Tags] | 64B | 4C +| | framesize=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-mrr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-mrr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-mrr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-mrr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-mrr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-mrr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-mrr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-mrr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-mrr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr.robot b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr.robot index a287b3c57d..c761fe10cb 100644 --- a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr.robot +++ b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2017 Cisco and/or its affiliates. +# Copyright (c) 2018 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -45,7 +45,7 @@ | ... | of packets transmitted. NDR and PDR are discovered for different | ... | Ethernet L2 frame sizes using MLRsearch library. | ... | TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 253 flows per flow-group) with all packets +| ... | (flow-group per direction, 254 flows per flow-group) with all packets | ... | containing Ethernet header, IPv4 header with IP protocol=61 and static | ... | payload. MAC addresses are matching MAC addresses of the TG node | ... | interfaces. @@ -181,4 +181,3 @@ | tc12-IMIX-4c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr | | [Tags] | IMIX | 4C | | framesize=IMIX_v4_1 | phy_cores=${4} - diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-mrr.robot b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-mrr.robot new file mode 100644 index 0000000000..ca6453f9f6 --- /dev/null +++ b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-mrr.robot @@ -0,0 +1,165 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR +| ... | NIC_Intel-X710 | ETH | L2XCFWD | SCALE | L2XCBASE | MEMIF +| ... | K8S | 1VSWITCH | 2VNF | VPP_AGENT | SFC_CONTROLLER | CHAIN +| ... +| Suite Setup | Set up 3-node performance topology with DUT's NIC model +| ... | L2 | Intel-X710 +| ... +| Test Setup | Set up performance test with Ligato Kubernetes +| ... +| Suite Teardown | Tear down 3-node performance topology +| ... +| Test Teardown | Tear down performance test with Ligato Kubernetes +| ... +| Test Template | Local Template +| ... +| Documentation | *RFC2544: Pkt throughput L2XC test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross- +| ... | connect. DUT1 and DUT2 tested with 2p10GE NIC X710 by Intel. +| ... | VNF Containers are connected to VSWITCH container via Memif interface. +| ... | All containers are running same VPP version. Containers are deployed +| ... | with Kubernetes. Configuration is applied by vnf-agent. +| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic +| ... | at line rate and reports total received/sent packets over trial period. +| ... | TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, 254 flows per flow-group) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static +| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +# X710 bandwidth limit +| ${s_limit} | ${10000000000} +# SFC profile +| ${sfc_profile} | configmaps/eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain +# Traffic profile: +| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 +# CPU settings +| ${system_cpus}= | ${1} +| ${vswitch_cpus}= | ${5} +| ${vnf_cpus}= | ${2} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs Container orchestrated config. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ +| | ... | trial throughput test. +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo +| | ... | ${s_limit} | ${framesize} +| | ... +| | ${dut1_if1_name}= | Get interface name | ${dut1} | ${dut1_if1} +| | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2} +| | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1} +| | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2} +| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} +| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} +| | Create Kubernetes VSWITCH startup config on all DUTs +| | ... | ${phy_cores} | ${rxq} | ${jumbo} +| | Create Kubernetes VNF'1' startup config on all DUTs +| | Create Kubernetes VNF'2' startup config on all DUTs +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vswitch-vpp-cfg | vpp.conf=/tmp/vswitch.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf1-vpp-cfg | vpp.conf=/tmp/vnf1.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf2-vpp-cfg | vpp.conf=/tmp/vnf2.conf +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut1_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut1_if2_name} +| | Apply Kubernetes resource on node | ${dut2} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut2_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut2_if2_name} +| | Wait for Kubernetes PODs on all DUTs | ${nodes} | csit +| | Set Kubernetes PODs affinity on all DUTs | ${nodes} +| | Then Traffic should pass with maximum rate +| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} + +*** Test Cases *** +| tc01-64B-1c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-mrr +| | [Tags] | 64B | 1C +| | framesize=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-mrr +| | [Tags] | 64B | 2C +| | framesize=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-mrr +| | [Tags] | 64B | 4C +| | framesize=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-mrr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-mrr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-mrr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-mrr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-mrr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-mrr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-mrr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-mrr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-mrr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr.robot b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr.robot index b33c5c7bdd..99d711c409 100644 --- a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr.robot +++ b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2017 Cisco and/or its affiliates. +# Copyright (c) 2018 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -45,7 +45,7 @@ | ... | of packets transmitted. NDR and PDR are discovered for different | ... | Ethernet L2 frame sizes using MLRsearch library. | ... | TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 253 flows per flow-group) with all packets +| ... | (flow-group per direction, 254 flows per flow-group) with all packets | ... | containing Ethernet header, IPv4 header with IP protocol=61 and static | ... | payload. MAC addresses are matching MAC addresses of the TG node | ... | interfaces. @@ -167,4 +167,3 @@ | tc12-IMIX-4c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr | | [Tags] | IMIX | 4C | | framesize=IMIX_v4_1 | phy_cores=${4} - diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-mrr.robot b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-mrr.robot new file mode 100644 index 0000000000..0f636412ea --- /dev/null +++ b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-mrr.robot @@ -0,0 +1,179 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR +| ... | NIC_Intel-X710 | ETH | L2XCFWD | SCALE | L2XCBASE | MEMIF +| ... | K8S | 1VSWITCH | 4VNF | VPP_AGENT | SFC_CONTROLLER | CHAIN +| ... +| Suite Setup | Set up 3-node performance topology with DUT's NIC model +| ... | L2 | Intel-X710 +| ... +| Test Setup | Set up performance test with Ligato Kubernetes +| ... +| Suite Teardown | Tear down 3-node performance topology +| ... +| Test Teardown | Tear down performance test with Ligato Kubernetes +| ... +| Test Template | Local Template +| ... +| Documentation | *RFC2544: Pkt throughput L2XC test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross- +| ... | connect. DUT1 and DUT2 tested with 2p10GE NIC X710 by Intel. +| ... | VNF Containers are connected to VSWITCH container via Memif interface. +| ... | All containers are running same VPP version. Containers are deployed +| ... | with Kubernetes. Configuration is applied by vnf-agent. +| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic +| ... | at line rate and reports total received/sent packets over trial period. +| ... | TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, 254 flows per flow-group) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static +| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +# X710 bandwidth limit +| ${s_limit} | ${10000000000} +# SFC profile +| ${sfc_profile} | configmaps/eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain +# Traffic profile: +| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 +# CPU settings +| ${system_cpus}= | ${1} +| ${vswitch_cpus}= | ${5} +| ${vnf_cpus}= | ${2} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs Container orchestrated config. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ +| | ... | trial throughput test. +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo +| | ... | ${s_limit} | ${framesize} +| | ... +| | ${dut1_if1_name}= | Get interface name | ${dut1} | ${dut1_if1} +| | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2} +| | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1} +| | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2} +| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} +| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} +| | Create Kubernetes VSWITCH startup config on all DUTs +| | ... | ${phy_cores} | ${rxq} | ${jumbo} +| | Create Kubernetes VNF'1' startup config on all DUTs +| | Create Kubernetes VNF'2' startup config on all DUTs +| | Create Kubernetes VNF'3' startup config on all DUTs +| | Create Kubernetes VNF'4' startup config on all DUTs +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vswitch-vpp-cfg | vpp.conf=/tmp/vswitch.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf1-vpp-cfg | vpp.conf=/tmp/vnf1.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf2-vpp-cfg | vpp.conf=/tmp/vnf2.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf3-vpp-cfg | vpp.conf=/tmp/vnf3.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf4-vpp-cfg | vpp.conf=/tmp/vnf4.conf +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf3 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf3 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf4 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf4 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut1_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut1_if2_name} +| | Apply Kubernetes resource on node | ${dut2} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut2_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut2_if2_name} +| | Wait for Kubernetes PODs on all DUTs | ${nodes} | csit +| | Set Kubernetes PODs affinity on all DUTs | ${nodes} +| | Then Traffic should pass with maximum rate +| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} + +*** Test Cases *** +| tc01-64B-1c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-mrr +| | [Tags] | 64B | 1C +| | framesize=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-mrr +| | [Tags] | 64B | 2C +| | framesize=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-mrr +| | [Tags] | 64B | 4C +| | framesize=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-mrr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-mrr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-mrr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-mrr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-mrr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-mrr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-mrr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-mrr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-mrr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr.robot b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr.robot index 9ebb772d45..3d6601478a 100644 --- a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr.robot +++ b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2017 Cisco and/or its affiliates. +# Copyright (c) 2018 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -45,7 +45,7 @@ | ... | of packets transmitted. NDR and PDR are discovered for different | ... | Ethernet L2 frame sizes using MLRsearch library. | ... | TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 253 flows per flow-group) with all packets +| ... | (flow-group per direction, 254 flows per flow-group) with all packets | ... | containing Ethernet header, IPv4 header with IP protocol=61 and static | ... | payload. MAC addresses are matching MAC addresses of the TG node | ... | interfaces. @@ -181,4 +181,3 @@ | tc12-IMIX-4c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr | | [Tags] | IMIX | 4C | | framesize=IMIX_v4_1 | phy_cores=${4} - diff --git a/tests/kubernetes/perf/container_memif/regenerate_testcases.py b/tests/kubernetes/perf/container_memif/regenerate_testcases.py new file mode 100755 index 0000000000..5fabf8b89d --- /dev/null +++ b/tests/kubernetes/perf/container_memif/regenerate_testcases.py @@ -0,0 +1,18 @@ +#!/usr/bin/env python + +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +from resources.libraries.python.autogen.Regenerator import Regenerator + +Regenerator().regenerate_glob("*.robot") |