diff options
Diffstat (limited to 'tests/kubernetes/perf')
41 files changed, 3494 insertions, 6305 deletions
diff --git a/tests/kubernetes/perf/__init__.robot b/tests/kubernetes/perf/__init__.robot index f44bbacbe5..fd5e0328be 100644 --- a/tests/kubernetes/perf/__init__.robot +++ b/tests/kubernetes/perf/__init__.robot @@ -50,6 +50,5 @@ | | Set Global Variable | ${perf_pdr_loss_acceptance_type} | percentage | | Set Global Variable | ${pkt_trace} | ${False} | | Set Global Variable | ${dut_stats} | ${False} -| | Set Global Variable | ${uio_driver} | uio_pci_generic | | @{plugins_to_enable}= | Create List | dpdk_plugin.so | | Set Global Variable | @{plugins_to_enable} diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr.robot b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr.robot new file mode 100644 index 0000000000..c3b1216a99 --- /dev/null +++ b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr.robot @@ -0,0 +1,164 @@ +# Copyright (c) 2017 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X520-DA2 | ETH | L2BDMACLRN | L2BDBASE | BASE | MEMIF +| ... | K8S | 1VSWITCH | 1VNF | VPP_AGENT | SFC_CONTROLLER | PARALLEL +| ... +| Suite Setup | Set up 3-node performance topology with DUT's NIC model +| ... | L2 | Intel-X520-DA2 +| ... +| Test Setup | Set up performance test with Ligato Kubernetes +| ... +| Suite Teardown | Tear down 3-node performance topology +| ... +| Test Teardown | Tear down performance test with Ligato Kubernetes +| ... +| Test Template | Local Template +| ... +| Documentation | *RFC2544: Pkt throughput L2BD test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with two L2 +| ... | bridge domains and MAC learning enabled. DUT1 and DUT2 tested with +| ... | 2p10GE NIC X520 Niantic by Intel. +| ... | VNF Container is connected to VSWITCH container via Memif interface. All +| ... | containers is running same VPP version. Containers are deployed with +| ... | Kubernetes. Configuration is applied by vnf-agent. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop +| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage +| ... | of packets transmitted. NDR and PDR are discovered for different +| ... | Ethernet L2 frame sizes using MLRsearch library. +| ... | TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, 253 flows per flow-group) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static +| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +# X520-DA2 bandwidth limit +| ${s_limit} | ${10000000000} +# SFC profile +| ${sfc_profile} | configmaps/eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral +# Traffic profile: +| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 +# CPU settings +| ${system_cpus}= | ${1} +| ${vswitch_cpus}= | ${5} +| ${vnf_cpus}= | ${2} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs Container orchestrated config. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | ${framesize} +| | Set Test Variable | ${min_rate} | ${10000} +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo +| | ... | ${s_limit} | ${framesize} +| | ... +| | ${dut1_if1_name}= | Get interface name | ${dut1} | ${dut1_if1} +| | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2} +| | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1} +| | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2} +| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} +| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} +| | Create Kubernetes VSWITCH startup config on all DUTs +| | ... | ${phy_cores} | ${rxq} | ${jumbo} +| | Create Kubernetes VNF'1' startup config on all DUTs +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vswitch-vpp-cfg | vpp.conf=/tmp/vswitch.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf1-vpp-cfg | vpp.conf=/tmp/vnf1.conf +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut1_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut1_if2_name} +| | Apply Kubernetes resource on node | ${dut2} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut2_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut2_if2_name} +| | Wait for Kubernetes PODs on all DUTs | ${nodes} | csit +| | Set Kubernetes PODs affinity on all DUTs | ${nodes} +| | Find NDR and PDR intervals using optimized search +| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} + +*** Test Cases *** +| tc01-64B-1c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr +| | [Tags] | 64B | 1C | THIS +| | framesize=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr +| | [Tags] | 64B | 2C +| | framesize=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr +| | [Tags] | 64B | 4C +| | framesize=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} + diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-ndrpdrdisc.robot b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-ndrpdrdisc.robot deleted file mode 100644 index 3b2a463630..0000000000 --- a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-ndrpdrdisc.robot +++ /dev/null @@ -1,305 +0,0 @@ -# Copyright (c) 2017 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC -| ... | NIC_Intel-X520-DA2 | ETH | L2BDMACLRN | L2BDBASE | BASE | MEMIF -| ... | K8S | 1VSWITCH | 1VNF | VPP_AGENT | SFC_CONTROLLER | PARALLEL -| ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L2 | Intel-X520-DA2 -| ... -| Test Setup | Set up performance test with Ligato Kubernetes -| ... -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Teardown | Tear down performance test with Ligato Kubernetes -| ... -| Documentation | *RFC2544: Pkt throughput L2BD test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with two L2 -| ... | bridge domains and MAC learning enabled. DUT1 and DUT2 tested with -| ... | 2p10GE NIC X520 Niantic by Intel. -| ... | VNF Container is connected to VSWITCH container via Memif interface. All -| ... | containers is running same VPP version. Containers are deployed with -| ... | Kubernetes. Configuration is applied by vnf-agent. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage -| ... | of packets transmitted. NDR and PDR are discovered for different -| ... | Ethernet L2 frame sizes using either binary search or linear search -| ... | algorithms with configured starting rate and final step that determines -| ... | throughput measurement resolution. Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 253 flows per flow-group) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static -| ... | payload. MAC addresses are matching MAC addresses of the TG node -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -| ${avg_imix_framesize}= | ${357.833} -# X520-DA2 bandwidth limit -| ${s_limit} | ${10000000000} -# SFC profile -| ${sfc_profile} | configmaps/eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral -# Traffic profile: -| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 -# CPU settings -| ${system_cpus}= | ${1} -| ${vswitch_cpus}= | ${5} -| ${vnf_cpus}= | ${2} - -*** Keywords *** -| Create Kubernetes VSWITCH startup config on all DUTs -| | [Documentation] | Create base startup configuration of VSWITCH in Kubernetes -| | ... | deploy to all DUTs. -| | ... -| | ... | *Arguments:* -| | ... | - ${framesize} - L2 framesize. Type: integer -| | ... | - ${wt} - Worker threads. Type: integer -| | ... | - ${rxq} - RX queues. Type: integer -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Create Kubernetes VSWITCH startup config on all DUTs \| ${64} \ -| | ... | \| ${1} \| ${1} -| | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} -| | ${dut1_numa}= | Get interfaces numa node | ${dut1} -| | ... | ${dut1_if1} | ${dut1_if2} -| | ${dut2_numa}= | Get interfaces numa node | ${dut2} -| | ... | ${dut2_if1} | ${dut2_if2} -| | ${dut1_if1_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if1} -| | ${dut1_if2_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if2} -| | ${dut2_if1_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if1} -| | ${dut2_if2_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if2} -| | ${cpu_cnt}= | Evaluate | ${wt}+1 -| | ${config}= | Run keyword | Create Kubernetes VSWITCH startup config -| | ... | node=${dut1} | cpu_cnt=${cpu_cnt} | cpu_node=${dut1_numa} -| | ... | cpu_skip=${system_cpus} | smt_used=${False} -| | ... | filename=/tmp/vswitch.conf | framesize=${framesize} | rxq=${rxq} -| | ... | if1=${dut1_if1_pci} | if2=${dut1_if2_pci} -| | ${config}= | Run keyword | Create Kubernetes VSWITCH startup config -| | ... | node=${dut2} | cpu_cnt=${cpu_cnt} | cpu_node=${dut2_numa} -| | ... | cpu_skip=${system_cpus} | smt_used=${False} -| | ... | filename=/tmp/vswitch.conf | framesize=${framesize} | rxq=${rxq} -| | ... | if1=${dut2_if1_pci} | if2=${dut2_if2_pci} - -| Create Kubernetes VNF'${i}' startup config on all DUTs -| | [Documentation] | Create base startup configuration of VNF in Kubernetes -| | ... | deploy to all DUTs. -| | ... -| | ${i_int}= | Convert To Integer | ${i} -| | ${cpu_skip}= | Evaluate | ${vswitch_cpus}+${system_cpus} -| | ${dut1_numa}= | Get interfaces numa node | ${dut1} -| | ... | ${dut1_if1} | ${dut1_if2} -| | ${dut2_numa}= | Get interfaces numa node | ${dut2} -| | ... | ${dut2_if1} | ${dut2_if2} -| | ${config}= | Run keyword | Create Kubernetes VNF startup config -| | ... | node=${dut1} | cpu_cnt=${vnf_cpus} | cpu_node=${dut1_numa} -| | ... | cpu_skip=${cpu_skip} | smt_used=${False} | filename=/tmp/vnf${i}.conf -| | ... | i=${i_int} -| | ${config}= | Run keyword | Create Kubernetes VNF startup config -| | ... | node=${dut2} | cpu_cnt=${vnf_cpus} | cpu_node=${dut2_numa} -| | ... | cpu_skip=${cpu_skip} | smt_used=${False} | filename=/tmp/vnf${i}.conf -| | ... | i=${i_int} - -| L2 Bridge Domain Binary Search -| | [Arguments] | ${framesize} | ${min_rate} | ${wt} | ${rxq} | ${search_type} -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${min_rate} -| | ${get_framesize}= | Set Variable If -| | ... | "${framesize}" == "IMIX_v4_1" | ${avg_imix_framesize} | ${framesize} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | ${dut1_if1_name}= | Get interface name | ${dut1} | ${dut1_if1} -| | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2} -| | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1} -| | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2} -| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} -| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} -| | Create Kubernetes VSWITCH startup config on all DUTs | ${get_framesize} -| | ... | ${wt} | ${rxq} -| | Create Kubernetes VNF'1' startup config on all DUTs -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vswitch-vpp-cfg | vpp.conf=/tmp/vswitch.conf -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vnf1-vpp-cfg | vpp.conf=/tmp/vnf1.conf -| | Apply Kubernetes resource on node | ${dut1} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 -| | Apply Kubernetes resource on node | ${dut2} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 -| | Apply Kubernetes resource on node | ${dut1} -| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} -| | ... | $$VSWITCH_IF1$$=${dut1_if1_name} -| | ... | $$VSWITCH_IF2$$=${dut1_if2_name} -| | Apply Kubernetes resource on node | ${dut2} -| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} -| | ... | $$VSWITCH_IF1$$=${dut2_if1_name} -| | ... | $$VSWITCH_IF2$$=${dut2_if2_name} -| | Wait for Kubernetes PODs on all DUTs | ${nodes} | csit -| | Set Kubernetes PODs affinity on all DUTs | ${nodes} -| | Run Keyword If | '${search_type}' == 'NDR' -| | ... | Find NDR using binary search and pps -| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} -| | ... | ELSE IF | '${search_type}' == 'PDR' -| | ... | Find PDR using binary search and pps -| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} -| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} - -*** Test Cases *** -| tc01-64B-1t1c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 64B | 1C | NDRDISC -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${64} | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR - -| tc02-64B-1t1c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${64} | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR - -| tc03-IMIX-1t1c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 1C | NDRDISC -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR - -| tc04-IMIX-1t1c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 1C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR - -| tc05-1518B-1t1c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 1518B | 1C | NDRDISC -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR - -| tc06-1518B-1t1c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR - -| tc07-64B-2t2c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 64B | 2C | NDRDISC -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${64} | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR - -| tc08-64B-2t2c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${64} | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR - -| tc09-IMIX-2t2c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 2C | NDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR - -| tc10-IMIX-2t2c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 2C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR - -| tc11-1518B-2t2c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 1518B | 2C | NDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR - -| tc12-1518B-2t2c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr.robot b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr.robot new file mode 100644 index 0000000000..e395166989 --- /dev/null +++ b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr.robot @@ -0,0 +1,171 @@ +# Copyright (c) 2017 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X520-DA2 | ETH | L2BDMACLRN | L2BDBASE | SCALE | MEMIF +| ... | K8S | 1VSWITCH | 2VNF | VPP_AGENT | SFC_CONTROLLER | HORIZONTAL +| ... +| Suite Setup | Set up 3-node performance topology with DUT's NIC model +| ... | L2 | Intel-X520-DA2 +| ... +| Test Setup | Set up performance test with Ligato Kubernetes +| ... +| Suite Teardown | Tear down 3-node performance topology +| ... +| Test Teardown | Tear down performance test with Ligato Kubernetes +| ... +| Test Template | Local Template +| ... +| Documentation | *RFC2544: Pkt throughput L2BD test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with two L2 +| ... | bridge domains and MAC learning enabled. DUT1 and DUT2 tested with +| ... | 2p10GE NIC X520 Niantic by Intel. +| ... | VNF Containers are connected to VSWITCH container via Memif interface. +| ... | All containers are running same VPP version. Containers are deployed +| ... | with Kubernetes. Configuration is applied by vnf-agent. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop +| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage +| ... | of packets transmitted. NDR and PDR are discovered for different +| ... | Ethernet L2 frame sizes using MLRsearch library. +| ... | TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, 253 flows per flow-group) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static +| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +# X520-DA2 bandwidth limit +| ${s_limit} | ${10000000000} +# SFC profile +| ${sfc_profile} | configmaps/eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz +# Traffic profile: +| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 +# CPU settings +| ${system_cpus}= | ${1} +| ${vswitch_cpus}= | ${5} +| ${vnf_cpus}= | ${2} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs Container orchestrated config. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | ${framesize} +| | Set Test Variable | ${min_rate} | ${10000} +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo +| | ... | ${s_limit} | ${framesize} +| | ... +| | ${dut1_if1_name}= | Get interface name | ${dut1} | ${dut1_if1} +| | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2} +| | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1} +| | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2} +| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} +| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} +| | Create Kubernetes VSWITCH startup config on all DUTs +| | ... | ${phy_cores} | ${rxq} | ${jumbo} +| | Create Kubernetes VNF'1' startup config on all DUTs +| | Create Kubernetes VNF'2' startup config on all DUTs +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vswitch-vpp-cfg | vpp.conf=/tmp/vswitch.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf1-vpp-cfg | vpp.conf=/tmp/vnf1.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf2-vpp-cfg | vpp.conf=/tmp/vnf2.conf +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut1_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut1_if2_name} +| | Apply Kubernetes resource on node | ${dut2} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut2_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut2_if2_name} +| | Wait for Kubernetes PODs on all DUTs | ${nodes} | csit +| | Set Kubernetes PODs affinity on all DUTs | ${nodes} +| | Find NDR and PDR intervals using optimized search +| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} + +*** Test Cases *** +| tc01-64B-1c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | 64B | 1C +| | framesize=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | 64B | 2C +| | framesize=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | 64B | 4C +| | framesize=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} + diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdrdisc.robot b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdrdisc.robot deleted file mode 100644 index 54b4918cab..0000000000 --- a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdrdisc.robot +++ /dev/null @@ -1,312 +0,0 @@ -# Copyright (c) 2017 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC -| ... | NIC_Intel-X520-DA2 | ETH | L2BDMACLRN | L2BDBASE | SCALE | MEMIF -| ... | K8S | 1VSWITCH | 2VNF | VPP_AGENT | SFC_CONTROLLER | HORIZONTAL -| ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L2 | Intel-X520-DA2 -| ... -| Test Setup | Set up performance test with Ligato Kubernetes -| ... -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Teardown | Tear down performance test with Ligato Kubernetes -| ... -| Documentation | *RFC2544: Pkt throughput L2BD test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with two L2 -| ... | bridge domains and MAC learning enabled. DUT1 and DUT2 tested with -| ... | 2p10GE NIC X520 Niantic by Intel. -| ... | VNF Containers are connected to VSWITCH container via Memif interface. -| ... | All containers are running same VPP version. Containers are deployed -| ... | with Kubernetes. Configuration is applied by vnf-agent. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage -| ... | of packets transmitted. NDR and PDR are discovered for different -| ... | Ethernet L2 frame sizes using either binary search or linear search -| ... | algorithms with configured starting rate and final step that determines -| ... | throughput measurement resolution. Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 253 flows per flow-group) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static -| ... | payload. MAC addresses are matching MAC addresses of the TG node -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -| ${avg_imix_framesize}= | ${357.833} -# X520-DA2 bandwidth limit -| ${s_limit} | ${10000000000} -# SFC profile -| ${sfc_profile} | configmaps/eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz -# Traffic profile: -| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 -# CPU settings -| ${system_cpus}= | ${1} -| ${vswitch_cpus}= | ${5} -| ${vnf_cpus}= | ${2} - -*** Keywords *** -| Create Kubernetes VSWITCH startup config on all DUTs -| | [Documentation] | Create base startup configuration of VSWITCH in Kubernetes -| | ... | deploy to all DUTs. -| | ... -| | ... | *Arguments:* -| | ... | - ${framesize} - L2 framesize. Type: integer -| | ... | - ${wt} - Worker threads. Type: integer -| | ... | - ${rxq} - RX queues. Type: integer -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Create Kubernetes VSWITCH startup config on all DUTs \| ${64} \ -| | ... | \| ${1} \| ${1} -| | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} -| | ${dut1_numa}= | Get interfaces numa node | ${dut1} -| | ... | ${dut1_if1} | ${dut1_if2} -| | ${dut2_numa}= | Get interfaces numa node | ${dut2} -| | ... | ${dut2_if1} | ${dut2_if2} -| | ${dut1_if1_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if1} -| | ${dut1_if2_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if2} -| | ${dut2_if1_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if1} -| | ${dut2_if2_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if2} -| | ${cpu_cnt}= | Evaluate | ${wt}+1 -| | ${config}= | Run keyword | Create Kubernetes VSWITCH startup config -| | ... | node=${dut1} | cpu_cnt=${cpu_cnt} | cpu_node=${dut1_numa} -| | ... | cpu_skip=${system_cpus} | smt_used=${False} -| | ... | filename=/tmp/vswitch.conf | framesize=${framesize} | rxq=${rxq} -| | ... | if1=${dut1_if1_pci} | if2=${dut1_if2_pci} -| | ${config}= | Run keyword | Create Kubernetes VSWITCH startup config -| | ... | node=${dut2} | cpu_cnt=${cpu_cnt} | cpu_node=${dut2_numa} -| | ... | cpu_skip=${system_cpus} | smt_used=${False} -| | ... | filename=/tmp/vswitch.conf | framesize=${framesize} | rxq=${rxq} -| | ... | if1=${dut2_if1_pci} | if2=${dut2_if2_pci} - -| Create Kubernetes VNF'${i}' startup config on all DUTs -| | [Documentation] | Create base startup configuration of VNF in Kubernetes -| | ... | deploy to all DUTs. -| | ... -| | ${i_int}= | Convert To Integer | ${i} -| | ${cpu_skip}= | Evaluate | ${vswitch_cpus}+${system_cpus} -| | ${dut1_numa}= | Get interfaces numa node | ${dut1} -| | ... | ${dut1_if1} | ${dut1_if2} -| | ${dut2_numa}= | Get interfaces numa node | ${dut2} -| | ... | ${dut2_if1} | ${dut2_if2} -| | ${config}= | Run keyword | Create Kubernetes VNF startup config -| | ... | node=${dut1} | cpu_cnt=${vnf_cpus} | cpu_node=${dut1_numa} -| | ... | cpu_skip=${cpu_skip} | smt_used=${False} | filename=/tmp/vnf${i}.conf -| | ... | i=${i_int} -| | ${config}= | Run keyword | Create Kubernetes VNF startup config -| | ... | node=${dut2} | cpu_cnt=${vnf_cpus} | cpu_node=${dut2_numa} -| | ... | cpu_skip=${cpu_skip} | smt_used=${False} | filename=/tmp/vnf${i}.conf -| | ... | i=${i_int} - -| L2 Bridge Domain Binary Search -| | [Arguments] | ${framesize} | ${min_rate} | ${wt} | ${rxq} | ${search_type} -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${min_rate} -| | ${get_framesize}= | Set Variable If -| | ... | "${framesize}" == "IMIX_v4_1" | ${avg_imix_framesize} | ${framesize} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | ${dut1_if1_name}= | Get interface name | ${dut1} | ${dut1_if1} -| | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2} -| | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1} -| | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2} -| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} -| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} -| | Create Kubernetes VSWITCH startup config on all DUTs | ${get_framesize} -| | ... | ${wt} | ${rxq} -| | Create Kubernetes VNF'1' startup config on all DUTs -| | Create Kubernetes VNF'2' startup config on all DUTs -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vswitch-vpp-cfg | vpp.conf=/tmp/vswitch.conf -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vnf1-vpp-cfg | vpp.conf=/tmp/vnf1.conf -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vnf2-vpp-cfg | vpp.conf=/tmp/vnf2.conf -| | Apply Kubernetes resource on node | ${dut1} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 -| | Apply Kubernetes resource on node | ${dut2} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 -| | Apply Kubernetes resource on node | ${dut1} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 -| | Apply Kubernetes resource on node | ${dut2} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 -| | Apply Kubernetes resource on node | ${dut1} -| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} -| | ... | $$VSWITCH_IF1$$=${dut1_if1_name} -| | ... | $$VSWITCH_IF2$$=${dut1_if2_name} -| | Apply Kubernetes resource on node | ${dut2} -| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} -| | ... | $$VSWITCH_IF1$$=${dut2_if1_name} -| | ... | $$VSWITCH_IF2$$=${dut2_if2_name} -| | Wait for Kubernetes PODs on all DUTs | ${nodes} | csit -| | Set Kubernetes PODs affinity on all DUTs | ${nodes} -| | Run Keyword If | '${search_type}' == 'NDR' -| | ... | Find NDR using binary search and pps -| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} -| | ... | ELSE IF | '${search_type}' == 'PDR' -| | ... | Find PDR using binary search and pps -| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} -| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} - -*** Test Cases *** -| tc01-64B-1t1c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 64B | 1C | NDRDISC -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${64} | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR - -| tc02-64B-1t1c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${64} | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR - -| tc03-IMIX-1t1c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 1C | NDRDISC -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR - -| tc04-IMIX-1t1c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 1C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR - -| tc05-1518B-1t1c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 1518B | 1C | NDRDISC -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR - -| tc06-1518B-1t1c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR - -| tc07-64B-2t2c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 64B | 2C | NDRDISC -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${64} | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR - -| tc08-64B-2t2c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${64} | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR - -| tc09-IMIX-2t2c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 2C | NDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR - -| tc10-IMIX-2t2c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 2C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR - -| tc11-1518B-2t2c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 1518B | 2C | NDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR - -| tc12-1518B-2t2c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr.robot b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr.robot new file mode 100644 index 0000000000..6530ae8cab --- /dev/null +++ b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr.robot @@ -0,0 +1,185 @@ +# Copyright (c) 2017 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X520-DA2 | ETH | L2BDMACLRN | L2BDBASE | SCALE | MEMIF +| ... | K8S | 1VSWITCH | 4VNF | VPP_AGENT | SFC_CONTROLLER | HORIZONTAL +| ... +| Suite Setup | Set up 3-node performance topology with DUT's NIC model +| ... | L2 | Intel-X520-DA2 +| ... +| Test Setup | Set up performance test with Ligato Kubernetes +| ... +| Suite Teardown | Tear down 3-node performance topology +| ... +| Test Teardown | Tear down performance test with Ligato Kubernetes +| ... +| Test Template | Local Template +| ... +| Documentation | *RFC2544: Pkt throughput L2BD test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with two L2 +| ... | bridge domains and MAC learning enabled. DUT1 and DUT2 tested with +| ... | 2p10GE NIC X520 Niantic by Intel. +| ... | VNF Containers are connected to VSWITCH container via Memif interface. +| ... | All containers are running same VPP version. Containers are deployed +| ... | with Kubernetes. Configuration is applied by vnf-agent. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop +| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage +| ... | of packets transmitted. NDR and PDR are discovered for different +| ... | Ethernet L2 frame sizes using MLRsearch library. +| ... | TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, 253 flows per flow-group) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static +| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +# X520-DA2 bandwidth limit +| ${s_limit} | ${10000000000} +# SFC profile +| ${sfc_profile} | configmaps/eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz +# Traffic profile: +| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 +# CPU settings +| ${system_cpus}= | ${1} +| ${vswitch_cpus}= | ${5} +| ${vnf_cpus}= | ${2} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs Container orchestrated config. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | ${framesize} +| | Set Test Variable | ${min_rate} | ${10000} +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo +| | ... | ${s_limit} | ${framesize} +| | ... +| | ${dut1_if1_name}= | Get interface name | ${dut1} | ${dut1_if1} +| | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2} +| | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1} +| | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2} +| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} +| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} +| | Create Kubernetes VSWITCH startup config on all DUTs +| | ... | ${phy_cores} | ${rxq} | ${jumbo} +| | Create Kubernetes VNF'1' startup config on all DUTs +| | Create Kubernetes VNF'2' startup config on all DUTs +| | Create Kubernetes VNF'3' startup config on all DUTs +| | Create Kubernetes VNF'4' startup config on all DUTs +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vswitch-vpp-cfg | vpp.conf=/tmp/vswitch.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf1-vpp-cfg | vpp.conf=/tmp/vnf1.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf2-vpp-cfg | vpp.conf=/tmp/vnf2.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf3-vpp-cfg | vpp.conf=/tmp/vnf3.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf4-vpp-cfg | vpp.conf=/tmp/vnf4.conf +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf3 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf3 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf4 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf4 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut1_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut1_if2_name} +| | Apply Kubernetes resource on node | ${dut2} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut2_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut2_if2_name} +| | Wait for Kubernetes PODs on all DUTs | ${nodes} | csit +| | Set Kubernetes PODs affinity on all DUTs | ${nodes} +| | Find NDR and PDR intervals using optimized search +| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} + +*** Test Cases *** +| tc01-64B-1c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | 64B | 1C +| | framesize=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | 64B | 2C +| | framesize=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | 64B | 4C +| | framesize=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} + diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdrdisc.robot b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdrdisc.robot deleted file mode 100644 index fa56b03f87..0000000000 --- a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdrdisc.robot +++ /dev/null @@ -1,326 +0,0 @@ -# Copyright (c) 2017 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC -| ... | NIC_Intel-X520-DA2 | ETH | L2BDMACLRN | L2BDBASE | SCALE | MEMIF -| ... | K8S | 1VSWITCH | 4VNF | VPP_AGENT | SFC_CONTROLLER | HORIZONTAL -| ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L2 | Intel-X520-DA2 -| ... -| Test Setup | Set up performance test with Ligato Kubernetes -| ... -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Teardown | Tear down performance test with Ligato Kubernetes -| ... -| Documentation | *RFC2544: Pkt throughput L2BD test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with two L2 -| ... | bridge domains and MAC learning enabled. DUT1 and DUT2 tested with -| ... | 2p10GE NIC X520 Niantic by Intel. -| ... | VNF Containers are connected to VSWITCH container via Memif interface. -| ... | All containers are running same VPP version. Containers are deployed -| ... | with Kubernetes. Configuration is applied by vnf-agent. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage -| ... | of packets transmitted. NDR and PDR are discovered for different -| ... | Ethernet L2 frame sizes using either binary search or linear search -| ... | algorithms with configured starting rate and final step that determines -| ... | throughput measurement resolution. Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 253 flows per flow-group) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static -| ... | payload. MAC addresses are matching MAC addresses of the TG node -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -| ${avg_imix_framesize}= | ${357.833} -# X520-DA2 bandwidth limit -| ${s_limit} | ${10000000000} -# SFC profile -| ${sfc_profile} | configmaps/eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz -# Traffic profile: -| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 -# CPU settings -| ${system_cpus}= | ${1} -| ${vswitch_cpus}= | ${5} -| ${vnf_cpus}= | ${2} - -*** Keywords *** -| Create Kubernetes VSWITCH startup config on all DUTs -| | [Documentation] | Create base startup configuration of VSWITCH in Kubernetes -| | ... | deploy to all DUTs. -| | ... -| | ... | *Arguments:* -| | ... | - ${framesize} - L2 framesize. Type: integer -| | ... | - ${wt} - Worker threads. Type: integer -| | ... | - ${rxq} - RX queues. Type: integer -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Create Kubernetes VSWITCH startup config on all DUTs \| ${64} \ -| | ... | \| ${1} \| ${1} -| | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} -| | ${dut1_numa}= | Get interfaces numa node | ${dut1} -| | ... | ${dut1_if1} | ${dut1_if2} -| | ${dut2_numa}= | Get interfaces numa node | ${dut2} -| | ... | ${dut2_if1} | ${dut2_if2} -| | ${dut1_if1_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if1} -| | ${dut1_if2_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if2} -| | ${dut2_if1_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if1} -| | ${dut2_if2_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if2} -| | ${cpu_cnt}= | Evaluate | ${wt}+1 -| | ${config}= | Run keyword | Create Kubernetes VSWITCH startup config -| | ... | node=${dut1} | cpu_cnt=${cpu_cnt} | cpu_node=${dut1_numa} -| | ... | cpu_skip=${system_cpus} | smt_used=${False} -| | ... | filename=/tmp/vswitch.conf | framesize=${framesize} | rxq=${rxq} -| | ... | if1=${dut1_if1_pci} | if2=${dut1_if2_pci} -| | ${config}= | Run keyword | Create Kubernetes VSWITCH startup config -| | ... | node=${dut2} | cpu_cnt=${cpu_cnt} | cpu_node=${dut2_numa} -| | ... | cpu_skip=${system_cpus} | smt_used=${False} -| | ... | filename=/tmp/vswitch.conf | framesize=${framesize} | rxq=${rxq} -| | ... | if1=${dut2_if1_pci} | if2=${dut2_if2_pci} - -| Create Kubernetes VNF'${i}' startup config on all DUTs -| | [Documentation] | Create base startup configuration of VNF in Kubernetes -| | ... | deploy to all DUTs. -| | ... -| | ${i_int}= | Convert To Integer | ${i} -| | ${cpu_skip}= | Evaluate | ${vswitch_cpus}+${system_cpus} -| | ${dut1_numa}= | Get interfaces numa node | ${dut1} -| | ... | ${dut1_if1} | ${dut1_if2} -| | ${dut2_numa}= | Get interfaces numa node | ${dut2} -| | ... | ${dut2_if1} | ${dut2_if2} -| | ${config}= | Run keyword | Create Kubernetes VNF startup config -| | ... | node=${dut1} | cpu_cnt=${vnf_cpus} | cpu_node=${dut1_numa} -| | ... | cpu_skip=${cpu_skip} | smt_used=${False} | filename=/tmp/vnf${i}.conf -| | ... | i=${i_int} -| | ${config}= | Run keyword | Create Kubernetes VNF startup config -| | ... | node=${dut2} | cpu_cnt=${vnf_cpus} | cpu_node=${dut2_numa} -| | ... | cpu_skip=${cpu_skip} | smt_used=${False} | filename=/tmp/vnf${i}.conf -| | ... | i=${i_int} - -| L2 Bridge Domain Binary Search -| | [Arguments] | ${framesize} | ${min_rate} | ${wt} | ${rxq} | ${search_type} -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${min_rate} -| | ${get_framesize}= | Set Variable If -| | ... | "${framesize}" == "IMIX_v4_1" | ${avg_imix_framesize} | ${framesize} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | ${dut1_if1_name}= | Get interface name | ${dut1} | ${dut1_if1} -| | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2} -| | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1} -| | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2} -| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} -| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} -| | Create Kubernetes VSWITCH startup config on all DUTs | ${get_framesize} -| | ... | ${wt} | ${rxq} -| | Create Kubernetes VNF'1' startup config on all DUTs -| | Create Kubernetes VNF'2' startup config on all DUTs -| | Create Kubernetes VNF'3' startup config on all DUTs -| | Create Kubernetes VNF'4' startup config on all DUTs -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vswitch-vpp-cfg | vpp.conf=/tmp/vswitch.conf -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vnf1-vpp-cfg | vpp.conf=/tmp/vnf1.conf -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vnf2-vpp-cfg | vpp.conf=/tmp/vnf2.conf -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vnf3-vpp-cfg | vpp.conf=/tmp/vnf3.conf -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vnf4-vpp-cfg | vpp.conf=/tmp/vnf4.conf -| | Apply Kubernetes resource on node | ${dut1} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 -| | Apply Kubernetes resource on node | ${dut2} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 -| | Apply Kubernetes resource on node | ${dut1} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 -| | Apply Kubernetes resource on node | ${dut2} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 -| | Apply Kubernetes resource on node | ${dut1} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf3 -| | Apply Kubernetes resource on node | ${dut2} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf3 -| | Apply Kubernetes resource on node | ${dut1} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf4 -| | Apply Kubernetes resource on node | ${dut2} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf4 -| | Apply Kubernetes resource on node | ${dut1} -| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} -| | ... | $$VSWITCH_IF1$$=${dut1_if1_name} -| | ... | $$VSWITCH_IF2$$=${dut1_if2_name} -| | Apply Kubernetes resource on node | ${dut2} -| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} -| | ... | $$VSWITCH_IF1$$=${dut2_if1_name} -| | ... | $$VSWITCH_IF2$$=${dut2_if2_name} -| | Wait for Kubernetes PODs on all DUTs | ${nodes} | csit -| | Set Kubernetes PODs affinity on all DUTs | ${nodes} -| | Run Keyword If | '${search_type}' == 'NDR' -| | ... | Find NDR using binary search and pps -| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} -| | ... | ELSE IF | '${search_type}' == 'PDR' -| | ... | Find PDR using binary search and pps -| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} -| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} - -*** Test Cases *** -| tc01-64B-1t1c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 64B | 1C | NDRDISC -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${64} | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR - -| tc02-64B-1t1c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${64} | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR - -| tc03-IMIX-1t1c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 1C | NDRDISC -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR - -| tc04-IMIX-1t1c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 1C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR - -| tc05-1518B-1t1c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 1518B | 1C | NDRDISC -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR - -| tc06-1518B-1t1c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR - -| tc07-64B-2t2c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 64B | 2C | NDRDISC -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${64} | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR - -| tc08-64B-2t2c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${64} | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR - -| tc09-IMIX-2t2c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 2C | NDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR - -| tc10-IMIX-2t2c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 2C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR - -| tc11-1518B-2t2c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 1518B | 2C | NDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR - -| tc12-1518B-2t2c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr.robot b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr.robot new file mode 100644 index 0000000000..d25c9ae094 --- /dev/null +++ b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr.robot @@ -0,0 +1,171 @@ +# Copyright (c) 2017 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X520-DA2 | ETH | L2BDMACLRN | L2BDBASE | SCALE | MEMIF +| ... | K8S | 1VSWITCH | 2VNF | VPP_AGENT | SFC_CONTROLLER | CHAIN +| ... +| Suite Setup | Set up 3-node performance topology with DUT's NIC model +| ... | L2 | Intel-X520-DA2 +| ... +| Test Setup | Set up performance test with Ligato Kubernetes +| ... +| Suite Teardown | Tear down 3-node performance topology +| ... +| Test Teardown | Tear down performance test with Ligato Kubernetes +| ... +| Test Template | Local Template +| ... +| Documentation | *RFC2544: Pkt throughput L2BD test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with two L2 +| ... | bridge domains and MAC learning enabled. DUT1 and DUT2 tested with +| ... | 2p10GE NIC X520 Niantic by Intel. +| ... | VNF Containers are connected to VSWITCH container via Memif interface. +| ... | All containers are running same VPP version. Containers are deployed +| ... | with Kubernetes. Configuration is applied by vnf-agent. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop +| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage +| ... | of packets transmitted. NDR and PDR are discovered for different +| ... | Ethernet L2 frame sizes using MLRsearch library. +| ... | TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, 253 flows per flow-group) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static +| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +# X520-DA2 bandwidth limit +| ${s_limit} | ${10000000000} +# SFC profile +| ${sfc_profile} | configmaps/eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain +# Traffic profile: +| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 +# CPU settings +| ${system_cpus}= | ${1} +| ${vswitch_cpus}= | ${5} +| ${vnf_cpus}= | ${2} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs Container orchestrated config. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | ${framesize} +| | Set Test Variable | ${min_rate} | ${10000} +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo +| | ... | ${s_limit} | ${framesize} +| | ... +| | ${dut1_if1_name}= | Get interface name | ${dut1} | ${dut1_if1} +| | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2} +| | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1} +| | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2} +| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} +| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} +| | Create Kubernetes VSWITCH startup config on all DUTs +| | ... | ${phy_cores} | ${rxq} | ${jumbo} +| | Create Kubernetes VNF'1' startup config on all DUTs +| | Create Kubernetes VNF'2' startup config on all DUTs +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vswitch-vpp-cfg | vpp.conf=/tmp/vswitch.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf1-vpp-cfg | vpp.conf=/tmp/vnf1.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf2-vpp-cfg | vpp.conf=/tmp/vnf2.conf +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut1_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut1_if2_name} +| | Apply Kubernetes resource on node | ${dut2} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut2_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut2_if2_name} +| | Wait for Kubernetes PODs on all DUTs | ${nodes} | csit +| | Set Kubernetes PODs affinity on all DUTs | ${nodes} +| | Find NDR and PDR intervals using optimized search +| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} + +*** Test Cases *** +| tc01-64B-1c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | 64B | 1C +| | framesize=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | 64B | 2C +| | framesize=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | 64B | 4C +| | framesize=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} + diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-ndrpdrdisc.robot b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-ndrpdrdisc.robot deleted file mode 100644 index dc78715aa0..0000000000 --- a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-ndrpdrdisc.robot +++ /dev/null @@ -1,312 +0,0 @@ -# Copyright (c) 2017 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC -| ... | NIC_Intel-X520-DA2 | ETH | L2BDMACLRN | L2BDBASE | SCALE | MEMIF -| ... | K8S | 1VSWITCH | 2VNF | VPP_AGENT | SFC_CONTROLLER | CHAIN -| ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L2 | Intel-X520-DA2 -| ... -| Test Setup | Set up performance test with Ligato Kubernetes -| ... -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Teardown | Tear down performance test with Ligato Kubernetes -| ... -| Documentation | *RFC2544: Pkt throughput L2BD test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with two L2 -| ... | bridge domains and MAC learning enabled. DUT1 and DUT2 tested with -| ... | 2p10GE NIC X520 Niantic by Intel. -| ... | VNF Containers are connected to VSWITCH container via Memif interface. -| ... | All containers are running same VPP version. Containers are deployed -| ... | with Kubernetes. Configuration is applied by vnf-agent. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage -| ... | of packets transmitted. NDR and PDR are discovered for different -| ... | Ethernet L2 frame sizes using either binary search or linear search -| ... | algorithms with configured starting rate and final step that determines -| ... | throughput measurement resolution. Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 253 flows per flow-group) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static -| ... | payload. MAC addresses are matching MAC addresses of the TG node -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -| ${avg_imix_framesize}= | ${357.833} -# X520-DA2 bandwidth limit -| ${s_limit} | ${10000000000} -# SFC profile -| ${sfc_profile} | configmaps/eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain -# Traffic profile: -| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 -# CPU settings -| ${system_cpus}= | ${1} -| ${vswitch_cpus}= | ${5} -| ${vnf_cpus}= | ${2} - -*** Keywords *** -| Create Kubernetes VSWITCH startup config on all DUTs -| | [Documentation] | Create base startup configuration of VSWITCH in Kubernetes -| | ... | deploy to all DUTs. -| | ... -| | ... | *Arguments:* -| | ... | - ${framesize} - L2 framesize. Type: integer -| | ... | - ${wt} - Worker threads. Type: integer -| | ... | - ${rxq} - RX queues. Type: integer -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Create Kubernetes VSWITCH startup config on all DUTs \| ${64} \ -| | ... | \| ${1} \| ${1} -| | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} -| | ${dut1_numa}= | Get interfaces numa node | ${dut1} -| | ... | ${dut1_if1} | ${dut1_if2} -| | ${dut2_numa}= | Get interfaces numa node | ${dut2} -| | ... | ${dut2_if1} | ${dut2_if2} -| | ${dut1_if1_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if1} -| | ${dut1_if2_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if2} -| | ${dut2_if1_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if1} -| | ${dut2_if2_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if2} -| | ${cpu_cnt}= | Evaluate | ${wt}+1 -| | ${config}= | Run keyword | Create Kubernetes VSWITCH startup config -| | ... | node=${dut1} | cpu_cnt=${cpu_cnt} | cpu_node=${dut1_numa} -| | ... | cpu_skip=${system_cpus} | smt_used=${False} -| | ... | filename=/tmp/vswitch.conf | framesize=${framesize} | rxq=${rxq} -| | ... | if1=${dut1_if1_pci} | if2=${dut1_if2_pci} -| | ${config}= | Run keyword | Create Kubernetes VSWITCH startup config -| | ... | node=${dut2} | cpu_cnt=${cpu_cnt} | cpu_node=${dut2_numa} -| | ... | cpu_skip=${system_cpus} | smt_used=${False} -| | ... | filename=/tmp/vswitch.conf | framesize=${framesize} | rxq=${rxq} -| | ... | if1=${dut2_if1_pci} | if2=${dut2_if2_pci} - -| Create Kubernetes VNF'${i}' startup config on all DUTs -| | [Documentation] | Create base startup configuration of VNF in Kubernetes -| | ... | deploy to all DUTs. -| | ... -| | ${i_int}= | Convert To Integer | ${i} -| | ${cpu_skip}= | Evaluate | ${vswitch_cpus}+${system_cpus} -| | ${dut1_numa}= | Get interfaces numa node | ${dut1} -| | ... | ${dut1_if1} | ${dut1_if2} -| | ${dut2_numa}= | Get interfaces numa node | ${dut2} -| | ... | ${dut2_if1} | ${dut2_if2} -| | ${config}= | Run keyword | Create Kubernetes VNF startup config -| | ... | node=${dut1} | cpu_cnt=${vnf_cpus} | cpu_node=${dut1_numa} -| | ... | cpu_skip=${cpu_skip} | smt_used=${False} | filename=/tmp/vnf${i}.conf -| | ... | i=${i_int} -| | ${config}= | Run keyword | Create Kubernetes VNF startup config -| | ... | node=${dut2} | cpu_cnt=${vnf_cpus} | cpu_node=${dut2_numa} -| | ... | cpu_skip=${cpu_skip} | smt_used=${False} | filename=/tmp/vnf${i}.conf -| | ... | i=${i_int} - -| L2 Bridge Domain Binary Search -| | [Arguments] | ${framesize} | ${min_rate} | ${wt} | ${rxq} | ${search_type} -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${min_rate} -| | ${get_framesize}= | Set Variable If -| | ... | "${framesize}" == "IMIX_v4_1" | ${avg_imix_framesize} | ${framesize} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | ${dut1_if1_name}= | Get interface name | ${dut1} | ${dut1_if1} -| | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2} -| | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1} -| | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2} -| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} -| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} -| | Create Kubernetes VSWITCH startup config on all DUTs | ${get_framesize} -| | ... | ${wt} | ${rxq} -| | Create Kubernetes VNF'1' startup config on all DUTs -| | Create Kubernetes VNF'2' startup config on all DUTs -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vswitch-vpp-cfg | vpp.conf=/tmp/vswitch.conf -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vnf1-vpp-cfg | vpp.conf=/tmp/vnf1.conf -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vnf2-vpp-cfg | vpp.conf=/tmp/vnf2.conf -| | Apply Kubernetes resource on node | ${dut1} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 -| | Apply Kubernetes resource on node | ${dut2} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 -| | Apply Kubernetes resource on node | ${dut1} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 -| | Apply Kubernetes resource on node | ${dut2} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 -| | Apply Kubernetes resource on node | ${dut1} -| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} -| | ... | $$VSWITCH_IF1$$=${dut1_if1_name} -| | ... | $$VSWITCH_IF2$$=${dut1_if2_name} -| | Apply Kubernetes resource on node | ${dut2} -| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} -| | ... | $$VSWITCH_IF1$$=${dut2_if1_name} -| | ... | $$VSWITCH_IF2$$=${dut2_if2_name} -| | Wait for Kubernetes PODs on all DUTs | ${nodes} | csit -| | Set Kubernetes PODs affinity on all DUTs | ${nodes} -| | Run Keyword If | '${search_type}' == 'NDR' -| | ... | Find NDR using binary search and pps -| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} -| | ... | ELSE IF | '${search_type}' == 'PDR' -| | ... | Find PDR using binary search and pps -| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} -| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} - -*** Test Cases *** -| tc01-64B-1t1c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 64B | 1C | NDRDISC -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${64} | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR - -| tc02-64B-1t1c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${64} | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR - -| tc03-IMIX-1t1c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 1C | NDRDISC -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR - -| tc04-IMIX-1t1c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 1C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR - -| tc05-1518B-1t1c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 1518B | 1C | NDRDISC -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR - -| tc06-1518B-1t1c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR - -| tc07-64B-2t2c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 64B | 2C | NDRDISC -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${64} | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR - -| tc08-64B-2t2c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${64} | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR - -| tc09-IMIX-2t2c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 2C | NDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR - -| tc10-IMIX-2t2c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 2C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR - -| tc11-1518B-2t2c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 1518B | 2C | NDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR - -| tc12-1518B-2t2c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr.robot b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr.robot new file mode 100644 index 0000000000..26336a23a2 --- /dev/null +++ b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr.robot @@ -0,0 +1,185 @@ +# Copyright (c) 2017 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X520-DA2 | ETH | L2BDMACLRN | L2BDBASE | SCALE | MEMIF +| ... | K8S | 1VSWITCH | 4VNF | VPP_AGENT | SFC_CONTROLLER | CHAIN +| ... +| Suite Setup | Set up 3-node performance topology with DUT's NIC model +| ... | L2 | Intel-X520-DA2 +| ... +| Test Setup | Set up performance test with Ligato Kubernetes +| ... +| Suite Teardown | Tear down 3-node performance topology +| ... +| Test Teardown | Tear down performance test with Ligato Kubernetes +| ... +| Test Template | Local Template +| ... +| Documentation | *RFC2544: Pkt throughput L2BD test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with two L2 +| ... | bridge domains and MAC learning enabled. DUT1 and DUT2 tested with +| ... | 2p10GE NIC X520 Niantic by Intel. +| ... | VNF Containers are connected to VSWITCH container via Memif interface. +| ... | All containers are running same VPP version. Containers are deployed +| ... | with Kubernetes. Configuration is applied by vnf-agent. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop +| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage +| ... | of packets transmitted. NDR and PDR are discovered for different +| ... | Ethernet L2 frame sizes using MLRsearch library. +| ... | TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, 253 flows per flow-group) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static +| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +# X520-DA2 bandwidth limit +| ${s_limit} | ${10000000000} +# SFC profile +| ${sfc_profile} | configmaps/eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain +# Traffic profile: +| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 +# CPU settings +| ${system_cpus}= | ${1} +| ${vswitch_cpus}= | ${5} +| ${vnf_cpus}= | ${2} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs Container orchestrated config. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | ${framesize} +| | Set Test Variable | ${min_rate} | ${10000} +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo +| | ... | ${s_limit} | ${framesize} +| | ... +| | ${dut1_if1_name}= | Get interface name | ${dut1} | ${dut1_if1} +| | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2} +| | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1} +| | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2} +| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} +| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} +| | Create Kubernetes VSWITCH startup config on all DUTs +| | ... | ${phy_cores} | ${rxq} | ${jumbo} +| | Create Kubernetes VNF'1' startup config on all DUTs +| | Create Kubernetes VNF'2' startup config on all DUTs +| | Create Kubernetes VNF'3' startup config on all DUTs +| | Create Kubernetes VNF'4' startup config on all DUTs +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vswitch-vpp-cfg | vpp.conf=/tmp/vswitch.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf1-vpp-cfg | vpp.conf=/tmp/vnf1.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf2-vpp-cfg | vpp.conf=/tmp/vnf2.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf3-vpp-cfg | vpp.conf=/tmp/vnf3.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf4-vpp-cfg | vpp.conf=/tmp/vnf4.conf +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf3 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf3 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf4 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf4 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut1_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut1_if2_name} +| | Apply Kubernetes resource on node | ${dut2} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut2_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut2_if2_name} +| | Wait for Kubernetes PODs on all DUTs | ${nodes} | csit +| | Set Kubernetes PODs affinity on all DUTs | ${nodes} +| | Find NDR and PDR intervals using optimized search +| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} + +*** Test Cases *** +| tc01-64B-1c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | 64B | 1C +| | framesize=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | 64B | 2C +| | framesize=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | 64B | 4C +| | framesize=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} + diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-ndrpdrdisc.robot b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-ndrpdrdisc.robot deleted file mode 100644 index 154b0c9c1a..0000000000 --- a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-ndrpdrdisc.robot +++ /dev/null @@ -1,326 +0,0 @@ -# Copyright (c) 2017 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC -| ... | NIC_Intel-X520-DA2 | ETH | L2BDMACLRN | L2BDBASE | SCALE | MEMIF -| ... | K8S | 1VSWITCH | 4VNF | VPP_AGENT | SFC_CONTROLLER | CHAIN -| ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L2 | Intel-X520-DA2 -| ... -| Test Setup | Set up performance test with Ligato Kubernetes -| ... -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Teardown | Tear down performance test with Ligato Kubernetes -| ... -| Documentation | *RFC2544: Pkt throughput L2BD test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with two L2 -| ... | bridge domains and MAC learning enabled. DUT1 and DUT2 tested with -| ... | 2p10GE NIC X520 Niantic by Intel. -| ... | VNF Containers are connected to VSWITCH container via Memif interface. -| ... | All containers are running same VPP version. Containers are deployed -| ... | with Kubernetes. Configuration is applied by vnf-agent. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage -| ... | of packets transmitted. NDR and PDR are discovered for different -| ... | Ethernet L2 frame sizes using either binary search or linear search -| ... | algorithms with configured starting rate and final step that determines -| ... | throughput measurement resolution. Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 253 flows per flow-group) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static -| ... | payload. MAC addresses are matching MAC addresses of the TG node -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -| ${avg_imix_framesize}= | ${357.833} -# X520-DA2 bandwidth limit -| ${s_limit} | ${10000000000} -# SFC profile -| ${sfc_profile} | configmaps/eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain -# Traffic profile: -| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 -# CPU settings -| ${system_cpus}= | ${1} -| ${vswitch_cpus}= | ${5} -| ${vnf_cpus}= | ${2} - -*** Keywords *** -| Create Kubernetes VSWITCH startup config on all DUTs -| | [Documentation] | Create base startup configuration of VSWITCH in Kubernetes -| | ... | deploy to all DUTs. -| | ... -| | ... | *Arguments:* -| | ... | - ${framesize} - L2 framesize. Type: integer -| | ... | - ${wt} - Worker threads. Type: integer -| | ... | - ${rxq} - RX queues. Type: integer -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Create Kubernetes VSWITCH startup config on all DUTs \| ${64} \ -| | ... | \| ${1} \| ${1} -| | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} -| | ${dut1_numa}= | Get interfaces numa node | ${dut1} -| | ... | ${dut1_if1} | ${dut1_if2} -| | ${dut2_numa}= | Get interfaces numa node | ${dut2} -| | ... | ${dut2_if1} | ${dut2_if2} -| | ${dut1_if1_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if1} -| | ${dut1_if2_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if2} -| | ${dut2_if1_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if1} -| | ${dut2_if2_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if2} -| | ${cpu_cnt}= | Evaluate | ${wt}+1 -| | ${config}= | Run keyword | Create Kubernetes VSWITCH startup config -| | ... | node=${dut1} | cpu_cnt=${cpu_cnt} | cpu_node=${dut1_numa} -| | ... | cpu_skip=${system_cpus} | smt_used=${False} -| | ... | filename=/tmp/vswitch.conf | framesize=${framesize} | rxq=${rxq} -| | ... | if1=${dut1_if1_pci} | if2=${dut1_if2_pci} -| | ${config}= | Run keyword | Create Kubernetes VSWITCH startup config -| | ... | node=${dut2} | cpu_cnt=${cpu_cnt} | cpu_node=${dut2_numa} -| | ... | cpu_skip=${system_cpus} | smt_used=${False} -| | ... | filename=/tmp/vswitch.conf | framesize=${framesize} | rxq=${rxq} -| | ... | if1=${dut2_if1_pci} | if2=${dut2_if2_pci} - -| Create Kubernetes VNF'${i}' startup config on all DUTs -| | [Documentation] | Create base startup configuration of VNF in Kubernetes -| | ... | deploy to all DUTs. -| | ... -| | ${i_int}= | Convert To Integer | ${i} -| | ${cpu_skip}= | Evaluate | ${vswitch_cpus}+${system_cpus} -| | ${dut1_numa}= | Get interfaces numa node | ${dut1} -| | ... | ${dut1_if1} | ${dut1_if2} -| | ${dut2_numa}= | Get interfaces numa node | ${dut2} -| | ... | ${dut2_if1} | ${dut2_if2} -| | ${config}= | Run keyword | Create Kubernetes VNF startup config -| | ... | node=${dut1} | cpu_cnt=${vnf_cpus} | cpu_node=${dut1_numa} -| | ... | cpu_skip=${cpu_skip} | smt_used=${False} | filename=/tmp/vnf${i}.conf -| | ... | i=${i_int} -| | ${config}= | Run keyword | Create Kubernetes VNF startup config -| | ... | node=${dut2} | cpu_cnt=${vnf_cpus} | cpu_node=${dut2_numa} -| | ... | cpu_skip=${cpu_skip} | smt_used=${False} | filename=/tmp/vnf${i}.conf -| | ... | i=${i_int} - -| L2 Bridge Domain Binary Search -| | [Arguments] | ${framesize} | ${min_rate} | ${wt} | ${rxq} | ${search_type} -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${min_rate} -| | ${get_framesize}= | Set Variable If -| | ... | "${framesize}" == "IMIX_v4_1" | ${avg_imix_framesize} | ${framesize} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | ${dut1_if1_name}= | Get interface name | ${dut1} | ${dut1_if1} -| | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2} -| | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1} -| | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2} -| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} -| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} -| | Create Kubernetes VSWITCH startup config on all DUTs | ${get_framesize} -| | ... | ${wt} | ${rxq} -| | Create Kubernetes VNF'1' startup config on all DUTs -| | Create Kubernetes VNF'2' startup config on all DUTs -| | Create Kubernetes VNF'3' startup config on all DUTs -| | Create Kubernetes VNF'4' startup config on all DUTs -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vswitch-vpp-cfg | vpp.conf=/tmp/vswitch.conf -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vnf1-vpp-cfg | vpp.conf=/tmp/vnf1.conf -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vnf2-vpp-cfg | vpp.conf=/tmp/vnf2.conf -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vnf3-vpp-cfg | vpp.conf=/tmp/vnf3.conf -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vnf4-vpp-cfg | vpp.conf=/tmp/vnf4.conf -| | Apply Kubernetes resource on node | ${dut1} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 -| | Apply Kubernetes resource on node | ${dut2} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 -| | Apply Kubernetes resource on node | ${dut1} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 -| | Apply Kubernetes resource on node | ${dut2} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 -| | Apply Kubernetes resource on node | ${dut1} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf3 -| | Apply Kubernetes resource on node | ${dut2} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf3 -| | Apply Kubernetes resource on node | ${dut1} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf4 -| | Apply Kubernetes resource on node | ${dut2} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf4 -| | Apply Kubernetes resource on node | ${dut1} -| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} -| | ... | $$VSWITCH_IF1$$=${dut1_if1_name} -| | ... | $$VSWITCH_IF2$$=${dut1_if2_name} -| | Apply Kubernetes resource on node | ${dut2} -| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} -| | ... | $$VSWITCH_IF1$$=${dut2_if1_name} -| | ... | $$VSWITCH_IF2$$=${dut2_if2_name} -| | Wait for Kubernetes PODs on all DUTs | ${nodes} | csit -| | Set Kubernetes PODs affinity on all DUTs | ${nodes} -| | Run Keyword If | '${search_type}' == 'NDR' -| | ... | Find NDR using binary search and pps -| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} -| | ... | ELSE IF | '${search_type}' == 'PDR' -| | ... | Find PDR using binary search and pps -| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} -| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} - -*** Test Cases *** -| tc01-64B-1t1c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 64B | 1C | NDRDISC -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${64} | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR - -| tc02-64B-1t1c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${64} | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR - -| tc03-IMIX-1t1c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 1C | NDRDISC -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR - -| tc04-IMIX-1t1c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 1C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR - -| tc05-1518B-1t1c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 1518B | 1C | NDRDISC -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR - -| tc06-1518B-1t1c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR - -| tc07-64B-2t2c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 64B | 2C | NDRDISC -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${64} | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR - -| tc08-64B-2t2c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${64} | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR - -| tc09-IMIX-2t2c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 2C | NDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR - -| tc10-IMIX-2t2c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 2C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR - -| tc11-1518B-2t2c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 1518B | 2C | NDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR - -| tc12-1518B-2t2c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr.robot b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr.robot new file mode 100644 index 0000000000..3dd36bee90 --- /dev/null +++ b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr.robot @@ -0,0 +1,163 @@ +# Copyright (c) 2017 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X520-DA2 | ETH | L2XCFWD | BASE | L2XCBASE | MEMIF +| ... | K8S | 1VSWITCH | 1VNF | VPP_AGENT | SFC_CONTROLLER | PARALLEL +| ... +| Suite Setup | Set up 3-node performance topology with DUT's NIC model +| ... | L2 | Intel-X520-DA2 +| ... +| Test Setup | Set up performance test with Ligato Kubernetes +| ... +| Suite Teardown | Tear down 3-node performance topology +| ... +| Test Teardown | Tear down performance test with Ligato Kubernetes +| ... +| Test Template | Local Template +| ... +| Documentation | *RFC2544: Pkt throughput L2XC test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross- +| ... | connect. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel. +| ... | VNF Container is connected to VSWITCH container via Memif interface. All +| ... | containers is running same VPP version. Containers are deployed with +| ... | Kubernetes. Configuration is applied by vnf-agent. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop +| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage +| ... | of packets transmitted. NDR and PDR are discovered for different +| ... | Ethernet L2 frame sizes using MLRsearch library. +| ... | TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, 253 flows per flow-group) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static +| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +# X520-DA2 bandwidth limit +| ${s_limit} | ${10000000000} +# SFC profile +| ${sfc_profile} | configmaps/eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral +# Traffic profile: +| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 +# CPU settings +| ${system_cpus}= | ${1} +| ${vswitch_cpus}= | ${5} +| ${vnf_cpus}= | ${2} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs Container orchestrated config. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | ${framesize} +| | Set Test Variable | ${min_rate} | ${10000} +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo +| | ... | ${s_limit} | ${framesize} +| | ... +| | ${dut1_if1_name}= | Get interface name | ${dut1} | ${dut1_if1} +| | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2} +| | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1} +| | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2} +| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} +| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} +| | Create Kubernetes VSWITCH startup config on all DUTs +| | ... | ${phy_cores} | ${rxq} | ${jumbo} +| | Create Kubernetes VNF'1' startup config on all DUTs +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vswitch-vpp-cfg | vpp.conf=/tmp/vswitch.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf1-vpp-cfg | vpp.conf=/tmp/vnf1.conf +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut1_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut1_if2_name} +| | Apply Kubernetes resource on node | ${dut2} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut2_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut2_if2_name} +| | Wait for Kubernetes PODs on all DUTs | ${nodes} | csit +| | Set Kubernetes PODs affinity on all DUTs | ${nodes} +| | Find NDR and PDR intervals using optimized search +| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} + +*** Test Cases *** +| tc01-64B-1c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr +| | [Tags] | 64B | 1C +| | framesize=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr +| | [Tags] | 64B | 2C +| | framesize=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr +| | [Tags] | 64B | 4C +| | framesize=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} + diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-ndrpdrdisc.robot b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-ndrpdrdisc.robot deleted file mode 100644 index 3edbb5d6e0..0000000000 --- a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-ndrpdrdisc.robot +++ /dev/null @@ -1,302 +0,0 @@ -# Copyright (c) 2017 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC -| ... | NIC_Intel-X520-DA2 | ETH | L2XCFWD | BASE | L2XCBASE | MEMIF -| ... | K8S | 1VSWITCH | 1VNF | VPP_AGENT | SFC_CONTROLLER | PARALLEL -| ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L2 | Intel-X520-DA2 -| ... -| Test Setup | Set up performance test with Ligato Kubernetes -| ... -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Teardown | Tear down performance test with Ligato Kubernetes -| ... -| Documentation | *RFC2544: Pkt throughput L2XC test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross- -| ... | connect. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel. -| ... | VNF Container is connected to VSWITCH container via Memif interface. All -| ... | containers is running same VPP version. Containers are deployed with -| ... | Kubernetes. Configuration is applied by vnf-agent. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage -| ... | of packets transmitted. NDR and PDR are discovered for different -| ... | Ethernet L2 frame sizes using either binary search or linear search -| ... | algorithms with configured starting rate and final step that determines -| ... | throughput measurement resolution. Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 253 flows per flow-group) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static -| ... | payload. MAC addresses are matching MAC addresses of the TG node -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -| ${avg_imix_framesize}= | ${357.833} -# X520-DA2 bandwidth limit -| ${s_limit} | ${10000000000} -# SFC profile -| ${sfc_profile} | configmaps/eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral -# Traffic profile: -| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 -# CPU settings -| ${system_cpus}= | ${1} -| ${vswitch_cpus}= | ${5} -| ${vnf_cpus}= | ${2} - -*** Keywords *** -| Create Kubernetes VSWITCH startup config on all DUTs -| | [Documentation] | Create base startup configuration of VSWITCH in Kubernetes -| | ... | deploy to all DUTs. -| | ... -| | ... | *Arguments:* -| | ... | - ${framesize} - L2 framesize. Type: integer -| | ... | - ${wt} - Worker threads. Type: integer -| | ... | - ${rxq} - RX queues. Type: integer -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Create Kubernetes VSWITCH startup config on all DUTs \| ${64} \ -| | ... | \| ${1} \| ${1} -| | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} -| | ${dut1_numa}= | Get interfaces numa node | ${dut1} -| | ... | ${dut1_if1} | ${dut1_if2} -| | ${dut2_numa}= | Get interfaces numa node | ${dut2} -| | ... | ${dut2_if1} | ${dut2_if2} -| | ${dut1_if1_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if1} -| | ${dut1_if2_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if2} -| | ${dut2_if1_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if1} -| | ${dut2_if2_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if2} -| | ${cpu_cnt}= | Evaluate | ${wt}+1 -| | ${config}= | Run keyword | Create Kubernetes VSWITCH startup config -| | ... | node=${dut1} | cpu_cnt=${cpu_cnt} | cpu_node=${dut1_numa} -| | ... | cpu_skip=${system_cpus} | smt_used=${False} -| | ... | filename=/tmp/vswitch.conf | framesize=${framesize} | rxq=${rxq} -| | ... | if1=${dut1_if1_pci} | if2=${dut1_if2_pci} -| | ${config}= | Run keyword | Create Kubernetes VSWITCH startup config -| | ... | node=${dut2} | cpu_cnt=${cpu_cnt} | cpu_node=${dut2_numa} -| | ... | cpu_skip=${system_cpus} | smt_used=${False} -| | ... | filename=/tmp/vswitch.conf | framesize=${framesize} | rxq=${rxq} -| | ... | if1=${dut2_if1_pci} | if2=${dut2_if2_pci} - -| Create Kubernetes VNF'${i}' startup config on all DUTs -| | [Documentation] | Create base startup configuration of VNF in Kubernetes -| | ... | deploy to all DUTs. -| | ... -| | ${i_int}= | Convert To Integer | ${i} -| | ${cpu_skip}= | Evaluate | ${vswitch_cpus}+${system_cpus} -| | ${dut1_numa}= | Get interfaces numa node | ${dut1} -| | ... | ${dut1_if1} | ${dut1_if2} -| | ${dut2_numa}= | Get interfaces numa node | ${dut2} -| | ... | ${dut2_if1} | ${dut2_if2} -| | ${config}= | Run keyword | Create Kubernetes VNF startup config -| | ... | node=${dut1} | cpu_cnt=${vnf_cpus} | cpu_node=${dut1_numa} -| | ... | cpu_skip=${cpu_skip} | smt_used=${False} | filename=/tmp/vnf${i}.conf -| | ... | i=${i_int} -| | ${config}= | Run keyword | Create Kubernetes VNF startup config -| | ... | node=${dut2} | cpu_cnt=${vnf_cpus} | cpu_node=${dut2_numa} -| | ... | cpu_skip=${cpu_skip} | smt_used=${False} | filename=/tmp/vnf${i}.conf -| | ... | i=${i_int} - -| L2 Cross Connect Binary Search -| | [Arguments] | ${framesize} | ${min_rate} | ${wt} | ${rxq} | ${search_type} -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${min_rate} -| | ${get_framesize}= | Set Variable If -| | ... | "${framesize}" == "IMIX_v4_1" | ${avg_imix_framesize} | ${framesize} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | ${dut1_if1_name}= | Get interface name | ${dut1} | ${dut1_if1} -| | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2} -| | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1} -| | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2} -| | Create Kubernetes VSWITCH startup config on all DUTs | ${get_framesize} -| | ... | ${wt} | ${rxq} -| | Create Kubernetes VNF'1' startup config on all DUTs -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vswitch-vpp-cfg | vpp.conf=/tmp/vswitch.conf -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vnf1-vpp-cfg | vpp.conf=/tmp/vnf1.conf -| | Apply Kubernetes resource on node | ${dut1} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 -| | Apply Kubernetes resource on node | ${dut2} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 -| | Apply Kubernetes resource on node | ${dut1} -| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} -| | ... | $$VSWITCH_IF1$$=${dut1_if1_name} -| | ... | $$VSWITCH_IF2$$=${dut1_if2_name} -| | Apply Kubernetes resource on node | ${dut2} -| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} -| | ... | $$VSWITCH_IF1$$=${dut2_if1_name} -| | ... | $$VSWITCH_IF2$$=${dut2_if2_name} -| | Wait for Kubernetes PODs on all DUTs | ${nodes} | csit -| | Set Kubernetes PODs affinity on all DUTs | ${nodes} -| | Run Keyword If | '${search_type}' == 'NDR' -| | ... | Find NDR using binary search and pps -| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} -| | ... | ELSE IF | '${search_type}' == 'PDR' -| | ... | Find PDR using binary search and pps -| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} -| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} - -*** Test Cases *** -| tc01-64B-1t1c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 64B | 1C | NDRDISC -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${64} | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR - -| tc02-64B-1t1c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${64} | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR - -| tc03-IMIX-1t1c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 1C | NDRDISC -| | [Template] | L2 Cross Connect Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR - -| tc04-IMIX-1t1c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 1C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR - -| tc05-1518B-1t1c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 1518B | 1C | NDRDISC -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR - -| tc06-1518B-1t1c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR - -| tc07-64B-2t2c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 64B | 2C | NDRDISC -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${64} | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR - -| tc08-64B-2t2c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${64} | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR - -| tc09-IMIX-2t2c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 2C | NDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR - -| tc10-IMIX-2t2c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 2C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR - -| tc11-1518B-2t2c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 1518B | 2C | NDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR - -| tc12-1518B-2t2c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr.robot b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr.robot new file mode 100644 index 0000000000..dbf21524ba --- /dev/null +++ b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr.robot @@ -0,0 +1,170 @@ +# Copyright (c) 2017 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X520-DA2 | ETH | L2XCFWD | SCALE | L2XCBASE | MEMIF +| ... | K8S | 1VSWITCH | 2VNF | VPP_AGENT | SFC_CONTROLLER | HORIZONTAL +| ... +| Suite Setup | Set up 3-node performance topology with DUT's NIC model +| ... | L2 | Intel-X520-DA2 +| ... +| Test Setup | Set up performance test with Ligato Kubernetes +| ... +| Suite Teardown | Tear down 3-node performance topology +| ... +| Test Teardown | Tear down performance test with Ligato Kubernetes +| ... +| Test Template | Local Template +| ... +| Documentation | *RFC2544: Pkt throughput L2XC test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross- +| ... | connect. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel. +| ... | VNF Containers are connected to VSWITCH container via Memif interface. +| ... | All containers are running same VPP version. Containers are deployed +| ... | with Kubernetes. Configuration is applied by vnf-agent. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop +| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage +| ... | of packets transmitted. NDR and PDR are discovered for different +| ... | Ethernet L2 frame sizes using MLRsearch library. +| ... | TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, 253 flows per flow-group) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static +| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +# X520-DA2 bandwidth limit +| ${s_limit} | ${10000000000} +# SFC profile +| ${sfc_profile} | configmaps/eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz +# Traffic profile: +| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 +# CPU settings +| ${system_cpus}= | ${1} +| ${vswitch_cpus}= | ${5} +| ${vnf_cpus}= | ${2} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs Container orchestrated config. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | ${framesize} +| | Set Test Variable | ${min_rate} | ${10000} +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo +| | ... | ${s_limit} | ${framesize} +| | ... +| | ${dut1_if1_name}= | Get interface name | ${dut1} | ${dut1_if1} +| | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2} +| | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1} +| | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2} +| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} +| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} +| | Create Kubernetes VSWITCH startup config on all DUTs +| | ... | ${phy_cores} | ${rxq} | ${jumbo} +| | Create Kubernetes VNF'1' startup config on all DUTs +| | Create Kubernetes VNF'2' startup config on all DUTs +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vswitch-vpp-cfg | vpp.conf=/tmp/vswitch.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf1-vpp-cfg | vpp.conf=/tmp/vnf1.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf2-vpp-cfg | vpp.conf=/tmp/vnf2.conf +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut1_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut1_if2_name} +| | Apply Kubernetes resource on node | ${dut2} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut2_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut2_if2_name} +| | Wait for Kubernetes PODs on all DUTs | ${nodes} | csit +| | Set Kubernetes PODs affinity on all DUTs | ${nodes} +| | Find NDR and PDR intervals using optimized search +| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} + +*** Test Cases *** +| tc01-64B-1c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | 64B | 1C +| | framesize=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | 64B | 2C +| | framesize=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | 64B | 4C +| | framesize=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} + diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdrdisc.robot b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdrdisc.robot deleted file mode 100644 index c6244f9377..0000000000 --- a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdrdisc.robot +++ /dev/null @@ -1,309 +0,0 @@ -# Copyright (c) 2017 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC -| ... | NIC_Intel-X520-DA2 | ETH | L2XCFWD | SCALE | L2XCBASE | MEMIF -| ... | K8S | 1VSWITCH | 2VNF | VPP_AGENT | SFC_CONTROLLER | HORIZONTAL -| ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L2 | Intel-X520-DA2 -| ... -| Test Setup | Set up performance test with Ligato Kubernetes -| ... -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Teardown | Tear down performance test with Ligato Kubernetes -| ... -| Documentation | *RFC2544: Pkt throughput L2XC test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross- -| ... | connect. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel. -| ... | VNF Containers are connected to VSWITCH container via Memif interface. -| ... | All containers are running same VPP version. Containers are deployed -| ... | with Kubernetes. Configuration is applied by vnf-agent. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage -| ... | of packets transmitted. NDR and PDR are discovered for different -| ... | Ethernet L2 frame sizes using either binary search or linear search -| ... | algorithms with configured starting rate and final step that determines -| ... | throughput measurement resolution. Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 253 flows per flow-group) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static -| ... | payload. MAC addresses are matching MAC addresses of the TG node -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -| ${avg_imix_framesize}= | ${357.833} -# X520-DA2 bandwidth limit -| ${s_limit} | ${10000000000} -# SFC profile -| ${sfc_profile} | configmaps/eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz -# Traffic profile: -| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 -# CPU settings -| ${system_cpus}= | ${1} -| ${vswitch_cpus}= | ${5} -| ${vnf_cpus}= | ${2} - -*** Keywords *** -| Create Kubernetes VSWITCH startup config on all DUTs -| | [Documentation] | Create base startup configuration of VSWITCH in Kubernetes -| | ... | deploy to all DUTs. -| | ... -| | ... | *Arguments:* -| | ... | - ${framesize} - L2 framesize. Type: integer -| | ... | - ${wt} - Worker threads. Type: integer -| | ... | - ${rxq} - RX queues. Type: integer -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Create Kubernetes VSWITCH startup config on all DUTs \| ${64} \ -| | ... | \| ${1} \| ${1} -| | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} -| | ${dut1_numa}= | Get interfaces numa node | ${dut1} -| | ... | ${dut1_if1} | ${dut1_if2} -| | ${dut2_numa}= | Get interfaces numa node | ${dut2} -| | ... | ${dut2_if1} | ${dut2_if2} -| | ${dut1_if1_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if1} -| | ${dut1_if2_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if2} -| | ${dut2_if1_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if1} -| | ${dut2_if2_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if2} -| | ${cpu_cnt}= | Evaluate | ${wt}+1 -| | ${config}= | Run keyword | Create Kubernetes VSWITCH startup config -| | ... | node=${dut1} | cpu_cnt=${cpu_cnt} | cpu_node=${dut1_numa} -| | ... | cpu_skip=${system_cpus} | smt_used=${False} -| | ... | filename=/tmp/vswitch.conf | framesize=${framesize} | rxq=${rxq} -| | ... | if1=${dut1_if1_pci} | if2=${dut1_if2_pci} -| | ${config}= | Run keyword | Create Kubernetes VSWITCH startup config -| | ... | node=${dut2} | cpu_cnt=${cpu_cnt} | cpu_node=${dut2_numa} -| | ... | cpu_skip=${system_cpus} | smt_used=${False} -| | ... | filename=/tmp/vswitch.conf | framesize=${framesize} | rxq=${rxq} -| | ... | if1=${dut2_if1_pci} | if2=${dut2_if2_pci} - -| Create Kubernetes VNF'${i}' startup config on all DUTs -| | [Documentation] | Create base startup configuration of VNF in Kubernetes -| | ... | deploy to all DUTs. -| | ... -| | ${i_int}= | Convert To Integer | ${i} -| | ${cpu_skip}= | Evaluate | ${vswitch_cpus}+${system_cpus} -| | ${dut1_numa}= | Get interfaces numa node | ${dut1} -| | ... | ${dut1_if1} | ${dut1_if2} -| | ${dut2_numa}= | Get interfaces numa node | ${dut2} -| | ... | ${dut2_if1} | ${dut2_if2} -| | ${config}= | Run keyword | Create Kubernetes VNF startup config -| | ... | node=${dut1} | cpu_cnt=${vnf_cpus} | cpu_node=${dut1_numa} -| | ... | cpu_skip=${cpu_skip} | smt_used=${False} | filename=/tmp/vnf${i}.conf -| | ... | i=${i_int} -| | ${config}= | Run keyword | Create Kubernetes VNF startup config -| | ... | node=${dut2} | cpu_cnt=${vnf_cpus} | cpu_node=${dut2_numa} -| | ... | cpu_skip=${cpu_skip} | smt_used=${False} | filename=/tmp/vnf${i}.conf -| | ... | i=${i_int} - -| L2 Cross Connect Binary Search -| | [Arguments] | ${framesize} | ${min_rate} | ${wt} | ${rxq} | ${search_type} -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${min_rate} -| | ${get_framesize}= | Set Variable If -| | ... | "${framesize}" == "IMIX_v4_1" | ${avg_imix_framesize} | ${framesize} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | ${dut1_if1_name}= | Get interface name | ${dut1} | ${dut1_if1} -| | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2} -| | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1} -| | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2} -| | Create Kubernetes VSWITCH startup config on all DUTs | ${get_framesize} -| | ... | ${wt} | ${rxq} -| | Create Kubernetes VNF'1' startup config on all DUTs -| | Create Kubernetes VNF'2' startup config on all DUTs -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vswitch-vpp-cfg | vpp.conf=/tmp/vswitch.conf -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vnf1-vpp-cfg | vpp.conf=/tmp/vnf1.conf -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vnf2-vpp-cfg | vpp.conf=/tmp/vnf2.conf -| | Apply Kubernetes resource on node | ${dut1} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 -| | Apply Kubernetes resource on node | ${dut2} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 -| | Apply Kubernetes resource on node | ${dut1} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 -| | Apply Kubernetes resource on node | ${dut2} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 -| | Apply Kubernetes resource on node | ${dut1} -| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} -| | ... | $$VSWITCH_IF1$$=${dut1_if1_name} -| | ... | $$VSWITCH_IF2$$=${dut1_if2_name} -| | Apply Kubernetes resource on node | ${dut2} -| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} -| | ... | $$VSWITCH_IF1$$=${dut2_if1_name} -| | ... | $$VSWITCH_IF2$$=${dut2_if2_name} -| | Wait for Kubernetes PODs on all DUTs | ${nodes} | csit -| | Set Kubernetes PODs affinity on all DUTs | ${nodes} -| | Run Keyword If | '${search_type}' == 'NDR' -| | ... | Find NDR using binary search and pps -| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} -| | ... | ELSE IF | '${search_type}' == 'PDR' -| | ... | Find PDR using binary search and pps -| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} -| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} - -*** Test Cases *** -| tc01-64B-1t1c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 64B | 1C | NDRDISC -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${64} | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR - -| tc02-64B-1t1c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${64} | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR - -| tc03-IMIX-1t1c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 1C | NDRDISC -| | [Template] | L2 Cross Connect Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR - -| tc04-IMIX-1t1c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 1C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR - -| tc05-1518B-1t1c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 1518B | 1C | NDRDISC -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR - -| tc06-1518B-1t1c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR - -| tc07-64B-2t2c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 64B | 2C | NDRDISC -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${64} | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR - -| tc08-64B-2t2c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${64} | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR - -| tc09-IMIX-2t2c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 2C | NDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR - -| tc10-IMIX-2t2c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 2C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR - -| tc11-1518B-2t2c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 1518B | 2C | NDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR - -| tc12-1518B-2t2c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr.robot b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr.robot new file mode 100644 index 0000000000..b77304658b --- /dev/null +++ b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr.robot @@ -0,0 +1,184 @@ +# Copyright (c) 2017 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X520-DA2 | ETH | L2XCFWD | SCALE | L2XCBASE | MEMIF +| ... | K8S | 1VSWITCH | 4VNF | VPP_AGENT | SFC_CONTROLLER | HORIZONTAL +| ... +| Suite Setup | Set up 3-node performance topology with DUT's NIC model +| ... | L2 | Intel-X520-DA2 +| ... +| Test Setup | Set up performance test with Ligato Kubernetes +| ... +| Suite Teardown | Tear down 3-node performance topology +| ... +| Test Teardown | Tear down performance test with Ligato Kubernetes +| ... +| Test Template | Local Template +| ... +| Documentation | *RFC2544: Pkt throughput L2XC test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross- +| ... | connect. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel. +| ... | VNF Containers are connected to VSWITCH container via Memif interface. +| ... | All containers are running same VPP version. Containers are deployed +| ... | with Kubernetes. Configuration is applied by vnf-agent. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop +| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage +| ... | of packets transmitted. NDR and PDR are discovered for different +| ... | Ethernet L2 frame sizes using MLRsearch library. +| ... | TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, 253 flows per flow-group) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static +| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +# X520-DA2 bandwidth limit +| ${s_limit} | ${10000000000} +# SFC profile +| ${sfc_profile} | configmaps/eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz +# Traffic profile: +| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 +# CPU settings +| ${system_cpus}= | ${1} +| ${vswitch_cpus}= | ${5} +| ${vnf_cpus}= | ${2} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs Container orchestrated config. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | ${framesize} +| | Set Test Variable | ${min_rate} | ${10000} +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo +| | ... | ${s_limit} | ${framesize} +| | ... +| | ${dut1_if1_name}= | Get interface name | ${dut1} | ${dut1_if1} +| | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2} +| | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1} +| | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2} +| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} +| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} +| | Create Kubernetes VSWITCH startup config on all DUTs +| | ... | ${phy_cores} | ${rxq} | ${jumbo} +| | Create Kubernetes VNF'1' startup config on all DUTs +| | Create Kubernetes VNF'2' startup config on all DUTs +| | Create Kubernetes VNF'3' startup config on all DUTs +| | Create Kubernetes VNF'4' startup config on all DUTs +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vswitch-vpp-cfg | vpp.conf=/tmp/vswitch.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf1-vpp-cfg | vpp.conf=/tmp/vnf1.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf2-vpp-cfg | vpp.conf=/tmp/vnf2.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf3-vpp-cfg | vpp.conf=/tmp/vnf3.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf4-vpp-cfg | vpp.conf=/tmp/vnf4.conf +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf3 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf3 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf4 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf4 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut1_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut1_if2_name} +| | Apply Kubernetes resource on node | ${dut2} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut2_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut2_if2_name} +| | Wait for Kubernetes PODs on all DUTs | ${nodes} | csit +| | Set Kubernetes PODs affinity on all DUTs | ${nodes} +| | Find NDR and PDR intervals using optimized search +| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} + +*** Test Cases *** +| tc01-64B-1c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | 64B | 1C +| | framesize=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | 64B | 2C +| | framesize=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | 64B | 4C +| | framesize=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} + diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdrdisc.robot b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdrdisc.robot deleted file mode 100644 index 774d2da0f0..0000000000 --- a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdrdisc.robot +++ /dev/null @@ -1,323 +0,0 @@ -# Copyright (c) 2017 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC -| ... | NIC_Intel-X520-DA2 | ETH | L2XCFWD | SCALE | L2XCBASE | MEMIF -| ... | K8S | 1VSWITCH | 4VNF | VPP_AGENT | SFC_CONTROLLER | HORIZONTAL -| ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L2 | Intel-X520-DA2 -| ... -| Test Setup | Set up performance test with Ligato Kubernetes -| ... -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Teardown | Tear down performance test with Ligato Kubernetes -| ... -| Documentation | *RFC2544: Pkt throughput L2XC test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross- -| ... | connect. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel. -| ... | VNF Containers are connected to VSWITCH container via Memif interface. -| ... | All containers are running same VPP version. Containers are deployed -| ... | with Kubernetes. Configuration is applied by vnf-agent. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage -| ... | of packets transmitted. NDR and PDR are discovered for different -| ... | Ethernet L2 frame sizes using either binary search or linear search -| ... | algorithms with configured starting rate and final step that determines -| ... | throughput measurement resolution. Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 253 flows per flow-group) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static -| ... | payload. MAC addresses are matching MAC addresses of the TG node -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -| ${avg_imix_framesize}= | ${357.833} -# X520-DA2 bandwidth limit -| ${s_limit} | ${10000000000} -# SFC profile -| ${sfc_profile} | configmaps/eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz -# Traffic profile: -| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 -# CPU settings -| ${system_cpus}= | ${1} -| ${vswitch_cpus}= | ${5} -| ${vnf_cpus}= | ${2} - -*** Keywords *** -| Create Kubernetes VSWITCH startup config on all DUTs -| | [Documentation] | Create base startup configuration of VSWITCH in Kubernetes -| | ... | deploy to all DUTs. -| | ... -| | ... | *Arguments:* -| | ... | - ${framesize} - L2 framesize. Type: integer -| | ... | - ${wt} - Worker threads. Type: integer -| | ... | - ${rxq} - RX queues. Type: integer -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Create Kubernetes VSWITCH startup config on all DUTs \| ${64} \ -| | ... | \| ${1} \| ${1} -| | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} -| | ${dut1_numa}= | Get interfaces numa node | ${dut1} -| | ... | ${dut1_if1} | ${dut1_if2} -| | ${dut2_numa}= | Get interfaces numa node | ${dut2} -| | ... | ${dut2_if1} | ${dut2_if2} -| | ${dut1_if1_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if1} -| | ${dut1_if2_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if2} -| | ${dut2_if1_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if1} -| | ${dut2_if2_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if2} -| | ${cpu_cnt}= | Evaluate | ${wt}+1 -| | ${config}= | Run keyword | Create Kubernetes VSWITCH startup config -| | ... | node=${dut1} | cpu_cnt=${cpu_cnt} | cpu_node=${dut1_numa} -| | ... | cpu_skip=${system_cpus} | smt_used=${False} -| | ... | filename=/tmp/vswitch.conf | framesize=${framesize} | rxq=${rxq} -| | ... | if1=${dut1_if1_pci} | if2=${dut1_if2_pci} -| | ${config}= | Run keyword | Create Kubernetes VSWITCH startup config -| | ... | node=${dut2} | cpu_cnt=${cpu_cnt} | cpu_node=${dut2_numa} -| | ... | cpu_skip=${system_cpus} | smt_used=${False} -| | ... | filename=/tmp/vswitch.conf | framesize=${framesize} | rxq=${rxq} -| | ... | if1=${dut2_if1_pci} | if2=${dut2_if2_pci} - -| Create Kubernetes VNF'${i}' startup config on all DUTs -| | [Documentation] | Create base startup configuration of VNF in Kubernetes -| | ... | deploy to all DUTs. -| | ... -| | ${i_int}= | Convert To Integer | ${i} -| | ${cpu_skip}= | Evaluate | ${vswitch_cpus}+${system_cpus} -| | ${dut1_numa}= | Get interfaces numa node | ${dut1} -| | ... | ${dut1_if1} | ${dut1_if2} -| | ${dut2_numa}= | Get interfaces numa node | ${dut2} -| | ... | ${dut2_if1} | ${dut2_if2} -| | ${config}= | Run keyword | Create Kubernetes VNF startup config -| | ... | node=${dut1} | cpu_cnt=${vnf_cpus} | cpu_node=${dut1_numa} -| | ... | cpu_skip=${cpu_skip} | smt_used=${False} | filename=/tmp/vnf${i}.conf -| | ... | i=${i_int} -| | ${config}= | Run keyword | Create Kubernetes VNF startup config -| | ... | node=${dut2} | cpu_cnt=${vnf_cpus} | cpu_node=${dut2_numa} -| | ... | cpu_skip=${cpu_skip} | smt_used=${False} | filename=/tmp/vnf${i}.conf -| | ... | i=${i_int} - -| L2 Cross Connect Binary Search -| | [Arguments] | ${framesize} | ${min_rate} | ${wt} | ${rxq} | ${search_type} -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${min_rate} -| | ${get_framesize}= | Set Variable If -| | ... | "${framesize}" == "IMIX_v4_1" | ${avg_imix_framesize} | ${framesize} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | ${dut1_if1_name}= | Get interface name | ${dut1} | ${dut1_if1} -| | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2} -| | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1} -| | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2} -| | Create Kubernetes VSWITCH startup config on all DUTs | ${get_framesize} -| | ... | ${wt} | ${rxq} -| | Create Kubernetes VNF'1' startup config on all DUTs -| | Create Kubernetes VNF'2' startup config on all DUTs -| | Create Kubernetes VNF'3' startup config on all DUTs -| | Create Kubernetes VNF'4' startup config on all DUTs -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vswitch-vpp-cfg | vpp.conf=/tmp/vswitch.conf -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vnf1-vpp-cfg | vpp.conf=/tmp/vnf1.conf -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vnf2-vpp-cfg | vpp.conf=/tmp/vnf2.conf -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vnf3-vpp-cfg | vpp.conf=/tmp/vnf3.conf -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vnf4-vpp-cfg | vpp.conf=/tmp/vnf4.conf -| | Apply Kubernetes resource on node | ${dut1} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 -| | Apply Kubernetes resource on node | ${dut2} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 -| | Apply Kubernetes resource on node | ${dut1} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 -| | Apply Kubernetes resource on node | ${dut2} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 -| | Apply Kubernetes resource on node | ${dut1} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf3 -| | Apply Kubernetes resource on node | ${dut2} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf3 -| | Apply Kubernetes resource on node | ${dut1} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf4 -| | Apply Kubernetes resource on node | ${dut2} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf4 -| | Apply Kubernetes resource on node | ${dut1} -| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} -| | ... | $$VSWITCH_IF1$$=${dut1_if1_name} -| | ... | $$VSWITCH_IF2$$=${dut1_if2_name} -| | Apply Kubernetes resource on node | ${dut2} -| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} -| | ... | $$VSWITCH_IF1$$=${dut2_if1_name} -| | ... | $$VSWITCH_IF2$$=${dut2_if2_name} -| | Wait for Kubernetes PODs on all DUTs | ${nodes} | csit -| | Set Kubernetes PODs affinity on all DUTs | ${nodes} -| | Run Keyword If | '${search_type}' == 'NDR' -| | ... | Find NDR using binary search and pps -| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} -| | ... | ELSE IF | '${search_type}' == 'PDR' -| | ... | Find PDR using binary search and pps -| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} -| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} - -*** Test Cases *** -| tc01-64B-1t1c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 64B | 1C | NDRDISC -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${64} | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR - -| tc02-64B-1t1c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${64} | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR - -| tc03-IMIX-1t1c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 1C | NDRDISC -| | [Template] | L2 Cross Connect Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR - -| tc04-IMIX-1t1c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 1C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR - -| tc05-1518B-1t1c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 1518B | 1C | NDRDISC -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR - -| tc06-1518B-1t1c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR - -| tc07-64B-2t2c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 64B | 2C | NDRDISC -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${64} | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR - -| tc08-64B-2t2c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${64} | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR - -| tc09-IMIX-2t2c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 2C | NDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR - -| tc10-IMIX-2t2c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 2C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR - -| tc11-1518B-2t2c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 1518B | 2C | NDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR - -| tc12-1518B-2t2c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr.robot b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr.robot new file mode 100644 index 0000000000..e83b16d124 --- /dev/null +++ b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr.robot @@ -0,0 +1,170 @@ +# Copyright (c) 2017 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X520-DA2 | ETH | L2XCFWD | SCALE | L2XCBASE | MEMIF +| ... | K8S | 1VSWITCH | 2VNF | VPP_AGENT | SFC_CONTROLLER | CHAIN +| ... +| Suite Setup | Set up 3-node performance topology with DUT's NIC model +| ... | L2 | Intel-X520-DA2 +| ... +| Test Setup | Set up performance test with Ligato Kubernetes +| ... +| Suite Teardown | Tear down 3-node performance topology +| ... +| Test Teardown | Tear down performance test with Ligato Kubernetes +| ... +| Test Template | Local Template +| ... +| Documentation | *RFC2544: Pkt throughput L2XC test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross- +| ... | connect. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel. +| ... | VNF Containers are connected to VSWITCH container via Memif interface. +| ... | All containers are running same VPP version. Containers are deployed +| ... | with Kubernetes. Configuration is applied by vnf-agent. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop +| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage +| ... | of packets transmitted. NDR and PDR are discovered for different +| ... | Ethernet L2 frame sizes using MLRsearch library. +| ... | TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, 253 flows per flow-group) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static +| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +# X520-DA2 bandwidth limit +| ${s_limit} | ${10000000000} +# SFC profile +| ${sfc_profile} | configmaps/eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain +# Traffic profile: +| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 +# CPU settings +| ${system_cpus}= | ${1} +| ${vswitch_cpus}= | ${5} +| ${vnf_cpus}= | ${2} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs Container orchestrated config. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | ${framesize} +| | Set Test Variable | ${min_rate} | ${10000} +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo +| | ... | ${s_limit} | ${framesize} +| | ... +| | ${dut1_if1_name}= | Get interface name | ${dut1} | ${dut1_if1} +| | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2} +| | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1} +| | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2} +| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} +| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} +| | Create Kubernetes VSWITCH startup config on all DUTs +| | ... | ${phy_cores} | ${rxq} | ${jumbo} +| | Create Kubernetes VNF'1' startup config on all DUTs +| | Create Kubernetes VNF'2' startup config on all DUTs +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vswitch-vpp-cfg | vpp.conf=/tmp/vswitch.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf1-vpp-cfg | vpp.conf=/tmp/vnf1.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf2-vpp-cfg | vpp.conf=/tmp/vnf2.conf +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut1_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut1_if2_name} +| | Apply Kubernetes resource on node | ${dut2} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut2_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut2_if2_name} +| | Wait for Kubernetes PODs on all DUTs | ${nodes} | csit +| | Set Kubernetes PODs affinity on all DUTs | ${nodes} +| | Find NDR and PDR intervals using optimized search +| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} + +*** Test Cases *** +| tc01-64B-1c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | 64B | 1C +| | framesize=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | 64B | 2C +| | framesize=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | 64B | 4C +| | framesize=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} + diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrpdrdisc.robot b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrpdrdisc.robot deleted file mode 100644 index 7a96e99ebf..0000000000 --- a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrpdrdisc.robot +++ /dev/null @@ -1,309 +0,0 @@ -# Copyright (c) 2017 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC -| ... | NIC_Intel-X520-DA2 | ETH | L2XCFWD | SCALE | L2XCBASE | MEMIF -| ... | K8S | 1VSWITCH | 2VNF | VPP_AGENT | SFC_CONTROLLER | CHAIN -| ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L2 | Intel-X520-DA2 -| ... -| Test Setup | Set up performance test with Ligato Kubernetes -| ... -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Teardown | Tear down performance test with Ligato Kubernetes -| ... -| Documentation | *RFC2544: Pkt throughput L2XC test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross- -| ... | connect. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel. -| ... | VNF Containers are connected to VSWITCH container via Memif interface. -| ... | All containers are running same VPP version. Containers are deployed -| ... | with Kubernetes. Configuration is applied by vnf-agent. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage -| ... | of packets transmitted. NDR and PDR are discovered for different -| ... | Ethernet L2 frame sizes using either binary search or linear search -| ... | algorithms with configured starting rate and final step that determines -| ... | throughput measurement resolution. Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 253 flows per flow-group) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static -| ... | payload. MAC addresses are matching MAC addresses of the TG node -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -| ${avg_imix_framesize}= | ${357.833} -# X520-DA2 bandwidth limit -| ${s_limit} | ${10000000000} -# SFC profile -| ${sfc_profile} | configmaps/eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain -# Traffic profile: -| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 -# CPU settings -| ${system_cpus}= | ${1} -| ${vswitch_cpus}= | ${5} -| ${vnf_cpus}= | ${2} - -*** Keywords *** -| Create Kubernetes VSWITCH startup config on all DUTs -| | [Documentation] | Create base startup configuration of VSWITCH in Kubernetes -| | ... | deploy to all DUTs. -| | ... -| | ... | *Arguments:* -| | ... | - ${framesize} - L2 framesize. Type: integer -| | ... | - ${wt} - Worker threads. Type: integer -| | ... | - ${rxq} - RX queues. Type: integer -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Create Kubernetes VSWITCH startup config on all DUTs \| ${64} \ -| | ... | \| ${1} \| ${1} -| | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} -| | ${dut1_numa}= | Get interfaces numa node | ${dut1} -| | ... | ${dut1_if1} | ${dut1_if2} -| | ${dut2_numa}= | Get interfaces numa node | ${dut2} -| | ... | ${dut2_if1} | ${dut2_if2} -| | ${dut1_if1_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if1} -| | ${dut1_if2_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if2} -| | ${dut2_if1_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if1} -| | ${dut2_if2_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if2} -| | ${cpu_cnt}= | Evaluate | ${wt}+1 -| | ${config}= | Run keyword | Create Kubernetes VSWITCH startup config -| | ... | node=${dut1} | cpu_cnt=${cpu_cnt} | cpu_node=${dut1_numa} -| | ... | cpu_skip=${system_cpus} | smt_used=${False} -| | ... | filename=/tmp/vswitch.conf | framesize=${framesize} | rxq=${rxq} -| | ... | if1=${dut1_if1_pci} | if2=${dut1_if2_pci} -| | ${config}= | Run keyword | Create Kubernetes VSWITCH startup config -| | ... | node=${dut2} | cpu_cnt=${cpu_cnt} | cpu_node=${dut2_numa} -| | ... | cpu_skip=${system_cpus} | smt_used=${False} -| | ... | filename=/tmp/vswitch.conf | framesize=${framesize} | rxq=${rxq} -| | ... | if1=${dut2_if1_pci} | if2=${dut2_if2_pci} - -| Create Kubernetes VNF'${i}' startup config on all DUTs -| | [Documentation] | Create base startup configuration of VNF in Kubernetes -| | ... | deploy to all DUTs. -| | ... -| | ${i_int}= | Convert To Integer | ${i} -| | ${cpu_skip}= | Evaluate | ${vswitch_cpus}+${system_cpus} -| | ${dut1_numa}= | Get interfaces numa node | ${dut1} -| | ... | ${dut1_if1} | ${dut1_if2} -| | ${dut2_numa}= | Get interfaces numa node | ${dut2} -| | ... | ${dut2_if1} | ${dut2_if2} -| | ${config}= | Run keyword | Create Kubernetes VNF startup config -| | ... | node=${dut1} | cpu_cnt=${vnf_cpus} | cpu_node=${dut1_numa} -| | ... | cpu_skip=${cpu_skip} | smt_used=${False} | filename=/tmp/vnf${i}.conf -| | ... | i=${i_int} -| | ${config}= | Run keyword | Create Kubernetes VNF startup config -| | ... | node=${dut2} | cpu_cnt=${vnf_cpus} | cpu_node=${dut2_numa} -| | ... | cpu_skip=${cpu_skip} | smt_used=${False} | filename=/tmp/vnf${i}.conf -| | ... | i=${i_int} - -| L2 Cross Connect Binary Search -| | [Arguments] | ${framesize} | ${min_rate} | ${wt} | ${rxq} | ${search_type} -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${min_rate} -| | ${get_framesize}= | Set Variable If -| | ... | "${framesize}" == "IMIX_v4_1" | ${avg_imix_framesize} | ${framesize} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | ${dut1_if1_name}= | Get interface name | ${dut1} | ${dut1_if1} -| | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2} -| | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1} -| | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2} -| | Create Kubernetes VSWITCH startup config on all DUTs | ${get_framesize} -| | ... | ${wt} | ${rxq} -| | Create Kubernetes VNF'1' startup config on all DUTs -| | Create Kubernetes VNF'2' startup config on all DUTs -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vswitch-vpp-cfg | vpp.conf=/tmp/vswitch.conf -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vnf1-vpp-cfg | vpp.conf=/tmp/vnf1.conf -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vnf2-vpp-cfg | vpp.conf=/tmp/vnf2.conf -| | Apply Kubernetes resource on node | ${dut1} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 -| | Apply Kubernetes resource on node | ${dut2} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 -| | Apply Kubernetes resource on node | ${dut1} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 -| | Apply Kubernetes resource on node | ${dut2} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 -| | Apply Kubernetes resource on node | ${dut1} -| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} -| | ... | $$VSWITCH_IF1$$=${dut1_if1_name} -| | ... | $$VSWITCH_IF2$$=${dut1_if2_name} -| | Apply Kubernetes resource on node | ${dut2} -| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} -| | ... | $$VSWITCH_IF1$$=${dut2_if1_name} -| | ... | $$VSWITCH_IF2$$=${dut2_if2_name} -| | Wait for Kubernetes PODs on all DUTs | ${nodes} | csit -| | Set Kubernetes PODs affinity on all DUTs | ${nodes} -| | Run Keyword If | '${search_type}' == 'NDR' -| | ... | Find NDR using binary search and pps -| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} -| | ... | ELSE IF | '${search_type}' == 'PDR' -| | ... | Find PDR using binary search and pps -| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} -| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} - -*** Test Cases *** -| tc01-64B-1t1c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 64B | 1C | NDRDISC -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${64} | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR - -| tc02-64B-1t1c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${64} | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR - -| tc03-IMIX-1t1c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 1C | NDRDISC -| | [Template] | L2 Cross Connect Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR - -| tc04-IMIX-1t1c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 1C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR - -| tc05-1518B-1t1c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 1518B | 1C | NDRDISC -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR - -| tc06-1518B-1t1c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR - -| tc07-64B-2t2c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 64B | 2C | NDRDISC -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${64} | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR - -| tc08-64B-2t2c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${64} | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR - -| tc09-IMIX-2t2c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 2C | NDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR - -| tc10-IMIX-2t2c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 2C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR - -| tc11-1518B-2t2c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 1518B | 2C | NDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR - -| tc12-1518B-2t2c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr.robot b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr.robot new file mode 100644 index 0000000000..2a35d960f2 --- /dev/null +++ b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr.robot @@ -0,0 +1,184 @@ +# Copyright (c) 2017 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X520-DA2 | ETH | L2XCFWD | SCALE | L2XCBASE | MEMIF +| ... | K8S | 1VSWITCH | 4VNF | VPP_AGENT | SFC_CONTROLLER | CHAIN +| ... +| Suite Setup | Set up 3-node performance topology with DUT's NIC model +| ... | L2 | Intel-X520-DA2 +| ... +| Test Setup | Set up performance test with Ligato Kubernetes +| ... +| Suite Teardown | Tear down 3-node performance topology +| ... +| Test Teardown | Tear down performance test with Ligato Kubernetes +| ... +| Test Template | Local Template +| ... +| Documentation | *RFC2544: Pkt throughput L2XC test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross- +| ... | connect. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel. +| ... | VNF Containers are connected to VSWITCH container via Memif interface. +| ... | All containers are running same VPP version. Containers are deployed +| ... | with Kubernetes. Configuration is applied by vnf-agent. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop +| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage +| ... | of packets transmitted. NDR and PDR are discovered for different +| ... | Ethernet L2 frame sizes using MLRsearch library. +| ... | TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, 253 flows per flow-group) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static +| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +# X520-DA2 bandwidth limit +| ${s_limit} | ${10000000000} +# SFC profile +| ${sfc_profile} | configmaps/eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain +# Traffic profile: +| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 +# CPU settings +| ${system_cpus}= | ${1} +| ${vswitch_cpus}= | ${5} +| ${vnf_cpus}= | ${2} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs Container orchestrated config. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | ${framesize} +| | Set Test Variable | ${min_rate} | ${10000} +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo +| | ... | ${s_limit} | ${framesize} +| | ... +| | ${dut1_if1_name}= | Get interface name | ${dut1} | ${dut1_if1} +| | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2} +| | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1} +| | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2} +| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} +| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} +| | Create Kubernetes VSWITCH startup config on all DUTs +| | ... | ${phy_cores} | ${rxq} | ${jumbo} +| | Create Kubernetes VNF'1' startup config on all DUTs +| | Create Kubernetes VNF'2' startup config on all DUTs +| | Create Kubernetes VNF'3' startup config on all DUTs +| | Create Kubernetes VNF'4' startup config on all DUTs +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vswitch-vpp-cfg | vpp.conf=/tmp/vswitch.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf1-vpp-cfg | vpp.conf=/tmp/vnf1.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf2-vpp-cfg | vpp.conf=/tmp/vnf2.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf3-vpp-cfg | vpp.conf=/tmp/vnf3.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf4-vpp-cfg | vpp.conf=/tmp/vnf4.conf +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf3 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf3 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf4 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf4 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut1_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut1_if2_name} +| | Apply Kubernetes resource on node | ${dut2} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut2_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut2_if2_name} +| | Wait for Kubernetes PODs on all DUTs | ${nodes} | csit +| | Set Kubernetes PODs affinity on all DUTs | ${nodes} +| | Find NDR and PDR intervals using optimized search +| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} + +*** Test Cases *** +| tc01-64B-1c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | 64B | 1C +| | framesize=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | 64B | 2C +| | framesize=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | 64B | 4C +| | framesize=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} + diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-ndrpdrdisc.robot b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-ndrpdrdisc.robot deleted file mode 100644 index b348dce9b6..0000000000 --- a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-ndrpdrdisc.robot +++ /dev/null @@ -1,323 +0,0 @@ -# Copyright (c) 2017 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC -| ... | NIC_Intel-X520-DA2 | ETH | L2XCFWD | SCALE | L2XCBASE | MEMIF -| ... | K8S | 1VSWITCH | 4VNF | VPP_AGENT | SFC_CONTROLLER | CHAIN -| ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L2 | Intel-X520-DA2 -| ... -| Test Setup | Set up performance test with Ligato Kubernetes -| ... -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Teardown | Tear down performance test with Ligato Kubernetes -| ... -| Documentation | *RFC2544: Pkt throughput L2XC test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross- -| ... | connect. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel. -| ... | VNF Containers are connected to VSWITCH container via Memif interface. -| ... | All containers are running same VPP version. Containers are deployed -| ... | with Kubernetes. Configuration is applied by vnf-agent. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage -| ... | of packets transmitted. NDR and PDR are discovered for different -| ... | Ethernet L2 frame sizes using either binary search or linear search -| ... | algorithms with configured starting rate and final step that determines -| ... | throughput measurement resolution. Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 253 flows per flow-group) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static -| ... | payload. MAC addresses are matching MAC addresses of the TG node -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -| ${avg_imix_framesize}= | ${357.833} -# X520-DA2 bandwidth limit -| ${s_limit} | ${10000000000} -# SFC profile -| ${sfc_profile} | configmaps/eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain -# Traffic profile: -| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 -# CPU settings -| ${system_cpus}= | ${1} -| ${vswitch_cpus}= | ${5} -| ${vnf_cpus}= | ${2} - -*** Keywords *** -| Create Kubernetes VSWITCH startup config on all DUTs -| | [Documentation] | Create base startup configuration of VSWITCH in Kubernetes -| | ... | deploy to all DUTs. -| | ... -| | ... | *Arguments:* -| | ... | - ${framesize} - L2 framesize. Type: integer -| | ... | - ${wt} - Worker threads. Type: integer -| | ... | - ${rxq} - RX queues. Type: integer -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Create Kubernetes VSWITCH startup config on all DUTs \| ${64} \ -| | ... | \| ${1} \| ${1} -| | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} -| | ${dut1_numa}= | Get interfaces numa node | ${dut1} -| | ... | ${dut1_if1} | ${dut1_if2} -| | ${dut2_numa}= | Get interfaces numa node | ${dut2} -| | ... | ${dut2_if1} | ${dut2_if2} -| | ${dut1_if1_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if1} -| | ${dut1_if2_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if2} -| | ${dut2_if1_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if1} -| | ${dut2_if2_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if2} -| | ${cpu_cnt}= | Evaluate | ${wt}+1 -| | ${config}= | Run keyword | Create Kubernetes VSWITCH startup config -| | ... | node=${dut1} | cpu_cnt=${cpu_cnt} | cpu_node=${dut1_numa} -| | ... | cpu_skip=${system_cpus} | smt_used=${False} -| | ... | filename=/tmp/vswitch.conf | framesize=${framesize} | rxq=${rxq} -| | ... | if1=${dut1_if1_pci} | if2=${dut1_if2_pci} -| | ${config}= | Run keyword | Create Kubernetes VSWITCH startup config -| | ... | node=${dut2} | cpu_cnt=${cpu_cnt} | cpu_node=${dut2_numa} -| | ... | cpu_skip=${system_cpus} | smt_used=${False} -| | ... | filename=/tmp/vswitch.conf | framesize=${framesize} | rxq=${rxq} -| | ... | if1=${dut2_if1_pci} | if2=${dut2_if2_pci} - -| Create Kubernetes VNF'${i}' startup config on all DUTs -| | [Documentation] | Create base startup configuration of VNF in Kubernetes -| | ... | deploy to all DUTs. -| | ... -| | ${i_int}= | Convert To Integer | ${i} -| | ${cpu_skip}= | Evaluate | ${vswitch_cpus}+${system_cpus} -| | ${dut1_numa}= | Get interfaces numa node | ${dut1} -| | ... | ${dut1_if1} | ${dut1_if2} -| | ${dut2_numa}= | Get interfaces numa node | ${dut2} -| | ... | ${dut2_if1} | ${dut2_if2} -| | ${config}= | Run keyword | Create Kubernetes VNF startup config -| | ... | node=${dut1} | cpu_cnt=${vnf_cpus} | cpu_node=${dut1_numa} -| | ... | cpu_skip=${cpu_skip} | smt_used=${False} | filename=/tmp/vnf${i}.conf -| | ... | i=${i_int} -| | ${config}= | Run keyword | Create Kubernetes VNF startup config -| | ... | node=${dut2} | cpu_cnt=${vnf_cpus} | cpu_node=${dut2_numa} -| | ... | cpu_skip=${cpu_skip} | smt_used=${False} | filename=/tmp/vnf${i}.conf -| | ... | i=${i_int} - -| L2 Cross Connect Binary Search -| | [Arguments] | ${framesize} | ${min_rate} | ${wt} | ${rxq} | ${search_type} -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${min_rate} -| | ${get_framesize}= | Set Variable If -| | ... | "${framesize}" == "IMIX_v4_1" | ${avg_imix_framesize} | ${framesize} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | ${dut1_if1_name}= | Get interface name | ${dut1} | ${dut1_if1} -| | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2} -| | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1} -| | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2} -| | Create Kubernetes VSWITCH startup config on all DUTs | ${get_framesize} -| | ... | ${wt} | ${rxq} -| | Create Kubernetes VNF'1' startup config on all DUTs -| | Create Kubernetes VNF'2' startup config on all DUTs -| | Create Kubernetes VNF'3' startup config on all DUTs -| | Create Kubernetes VNF'4' startup config on all DUTs -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vswitch-vpp-cfg | vpp.conf=/tmp/vswitch.conf -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vnf1-vpp-cfg | vpp.conf=/tmp/vnf1.conf -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vnf2-vpp-cfg | vpp.conf=/tmp/vnf2.conf -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vnf3-vpp-cfg | vpp.conf=/tmp/vnf3.conf -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vnf4-vpp-cfg | vpp.conf=/tmp/vnf4.conf -| | Apply Kubernetes resource on node | ${dut1} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 -| | Apply Kubernetes resource on node | ${dut2} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 -| | Apply Kubernetes resource on node | ${dut1} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 -| | Apply Kubernetes resource on node | ${dut2} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 -| | Apply Kubernetes resource on node | ${dut1} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf3 -| | Apply Kubernetes resource on node | ${dut2} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf3 -| | Apply Kubernetes resource on node | ${dut1} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf4 -| | Apply Kubernetes resource on node | ${dut2} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf4 -| | Apply Kubernetes resource on node | ${dut1} -| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} -| | ... | $$VSWITCH_IF1$$=${dut1_if1_name} -| | ... | $$VSWITCH_IF2$$=${dut1_if2_name} -| | Apply Kubernetes resource on node | ${dut2} -| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} -| | ... | $$VSWITCH_IF1$$=${dut2_if1_name} -| | ... | $$VSWITCH_IF2$$=${dut2_if2_name} -| | Wait for Kubernetes PODs on all DUTs | ${nodes} | csit -| | Set Kubernetes PODs affinity on all DUTs | ${nodes} -| | Run Keyword If | '${search_type}' == 'NDR' -| | ... | Find NDR using binary search and pps -| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} -| | ... | ELSE IF | '${search_type}' == 'PDR' -| | ... | Find PDR using binary search and pps -| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} -| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} - -*** Test Cases *** -| tc01-64B-1t1c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 64B | 1C | NDRDISC -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${64} | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR - -| tc02-64B-1t1c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${64} | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR - -| tc03-IMIX-1t1c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 1C | NDRDISC -| | [Template] | L2 Cross Connect Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR - -| tc04-IMIX-1t1c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 1C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR - -| tc05-1518B-1t1c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 1518B | 1C | NDRDISC -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR - -| tc06-1518B-1t1c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR - -| tc07-64B-2t2c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 64B | 2C | NDRDISC -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${64} | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR - -| tc08-64B-2t2c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${64} | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR - -| tc09-IMIX-2t2c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 2C | NDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR - -| tc10-IMIX-2t2c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 2C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR - -| tc11-1518B-2t2c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 1518B | 2C | NDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR - -| tc12-1518B-2t2c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr.robot b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr.robot new file mode 100644 index 0000000000..02dc99027e --- /dev/null +++ b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr.robot @@ -0,0 +1,164 @@ +# Copyright (c) 2017 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | L2BDBASE | BASE | MEMIF +| ... | K8S | 1VSWITCH | 1VNF | VPP_AGENT | SFC_CONTROLLER | PARALLEL +| ... +| Suite Setup | Set up 3-node performance topology with DUT's NIC model +| ... | L2 | Intel-X710 +| ... +| Test Setup | Set up performance test with Ligato Kubernetes +| ... +| Suite Teardown | Tear down 3-node performance topology +| ... +| Test Teardown | Tear down performance test with Ligato Kubernetes +| ... +| Test Template | Local Template +| ... +| Documentation | *RFC2544: Pkt throughput L2BD test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with two L2 +| ... | bridge domains and MAC learning enabled. DUT1 and DUT2 tested with +| ... | 2p10GE NIC X710 by Intel. +| ... | VNF Container is connected to VSWITCH container via Memif interface. All +| ... | containers is running same VPP version. Containers are deployed with +| ... | Kubernetes. Configuration is applied by vnf-agent. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop +| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage +| ... | of packets transmitted. NDR and PDR are discovered for different +| ... | Ethernet L2 frame sizes using MLRsearch library. +| ... | TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, 253 flows per flow-group) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static +| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +# X710 bandwidth limit +| ${s_limit} | ${10000000000} +# SFC profile +| ${sfc_profile} | configmaps/eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral +# Traffic profile: +| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 +# CPU settings +| ${system_cpus}= | ${1} +| ${vswitch_cpus}= | ${5} +| ${vnf_cpus}= | ${2} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs Container orchestrated config. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | ${framesize} +| | Set Test Variable | ${min_rate} | ${10000} +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo +| | ... | ${s_limit} | ${framesize} +| | ... +| | ${dut1_if1_name}= | Get interface name | ${dut1} | ${dut1_if1} +| | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2} +| | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1} +| | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2} +| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} +| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} +| | Create Kubernetes VSWITCH startup config on all DUTs +| | ... | ${phy_cores} | ${rxq} | ${jumbo} +| | Create Kubernetes VNF'1' startup config on all DUTs +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vswitch-vpp-cfg | vpp.conf=/tmp/vswitch.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf1-vpp-cfg | vpp.conf=/tmp/vnf1.conf +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut1_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut1_if2_name} +| | Apply Kubernetes resource on node | ${dut2} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut2_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut2_if2_name} +| | Wait for Kubernetes PODs on all DUTs | ${nodes} | csit +| | Set Kubernetes PODs affinity on all DUTs | ${nodes} +| | Find NDR and PDR intervals using optimized search +| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} + +*** Test Cases *** +| tc01-64B-1c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr +| | [Tags] | 64B | 1C +| | framesize=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr +| | [Tags] | 64B | 2C +| | framesize=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr +| | [Tags] | 64B | 4C +| | framesize=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} + diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-ndrpdrdisc.robot b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-ndrpdrdisc.robot deleted file mode 100644 index ab0ff27a61..0000000000 --- a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-ndrpdrdisc.robot +++ /dev/null @@ -1,306 +0,0 @@ -# Copyright (c) 2018 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC -| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | L2BDBASE | BASE | MEMIF -| ... | K8S | 1VSWITCH | 1VNF | VPP_AGENT | SFC_CONTROLLER | PARALLEL -| ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L2 | Intel-X710 -| ... -| Test Setup | Set up performance test with Ligato Kubernetes -| ... -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Teardown | Tear down performance test with Ligato Kubernetes -| ... -| Documentation | *RFC2544: Pkt throughput L2BD test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with two L2 -| ... | bridge domains and MAC learning enabled. DUT1 and DUT2 tested with -| ... | 2p10GE NIC X710 by Intel. -| ... | VNF Container is connected to VSWITCH container via Memif interface. All -| ... | containers is running same VPP version. Containers are deployed with -| ... | Kubernetes. Configuration is applied by vnf-agent. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage -| ... | of packets transmitted. NDR and PDR are discovered for different -| ... | Ethernet L2 frame sizes using either binary search or linear search -| ... | algorithms with configured starting rate and final step that determines -| ... | throughput measurement resolution. Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 254 flows per flow-group) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static -| ... | payload. MAC addresses are matching MAC addresses of the TG node -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -# X710 bandwidth limit -| ${s_limit} | ${10000000000} -# SFC profile -| ${sfc_profile} | configmaps/eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral -# Traffic profile: -| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 -# CPU settings -| ${system_cpus}= | ${1} -| ${vswitch_cpus}= | ${5} -| ${vnf_cpus}= | ${2} - -*** Keywords *** -| Create Kubernetes VSWITCH startup config on all DUTs -| | [Documentation] | Create base startup configuration of VSWITCH in Kubernetes -| | ... | deploy to all DUTs. -| | ... -| | ... | *Arguments:* -| | ... | - ${framesize} - L2 framesize. Type: integer -| | ... | - ${wt} - Worker threads. Type: integer -| | ... | - ${rxq} - RX queues. Type: integer -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Create Kubernetes VSWITCH startup config on all DUTs \| ${64} \ -| | ... | \| ${1} \| ${1} -| | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} -| | ${dut1_numa}= | Get interfaces numa node | ${dut1} -| | ... | ${dut1_if1} | ${dut1_if2} -| | ${dut2_numa}= | Get interfaces numa node | ${dut2} -| | ... | ${dut2_if1} | ${dut2_if2} -| | ${dut1_if1_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if1} -| | ${dut1_if2_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if2} -| | ${dut2_if1_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if1} -| | ${dut2_if2_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if2} -| | ${cpu_cnt}= | Evaluate | ${wt}+1 -| | ${config}= | Run keyword | Create Kubernetes VSWITCH startup config -| | ... | node=${dut1} | cpu_cnt=${cpu_cnt} | cpu_node=${dut1_numa} -| | ... | cpu_skip=${system_cpus} | smt_used=${False} -| | ... | filename=/tmp/vswitch.conf | framesize=${framesize} | rxq=${rxq} -| | ... | if1=${dut1_if1_pci} | if2=${dut1_if2_pci} -| | ${config}= | Run keyword | Create Kubernetes VSWITCH startup config -| | ... | node=${dut2} | cpu_cnt=${cpu_cnt} | cpu_node=${dut2_numa} -| | ... | cpu_skip=${system_cpus} | smt_used=${False} -| | ... | filename=/tmp/vswitch.conf | framesize=${framesize} | rxq=${rxq} -| | ... | if1=${dut2_if1_pci} | if2=${dut2_if2_pci} - -| Create Kubernetes VNF'${i}' startup config on all DUTs -| | [Documentation] | Create base startup configuration of VNF in Kubernetes -| | ... | deploy to all DUTs. -| | ... -| | ${i_int}= | Convert To Integer | ${i} -| | ${cpu_skip}= | Evaluate | ${vswitch_cpus}+${system_cpus} -| | ${dut1_numa}= | Get interfaces numa node | ${dut1} -| | ... | ${dut1_if1} | ${dut1_if2} -| | ${dut2_numa}= | Get interfaces numa node | ${dut2} -| | ... | ${dut2_if1} | ${dut2_if2} -| | ${config}= | Run keyword | Create Kubernetes VNF startup config -| | ... | node=${dut1} | cpu_cnt=${vnf_cpus} | cpu_node=${dut1_numa} -| | ... | cpu_skip=${cpu_skip} | smt_used=${False} | filename=/tmp/vnf${i}.conf -| | ... | i=${i_int} -| | ${config}= | Run keyword | Create Kubernetes VNF startup config -| | ... | node=${dut2} | cpu_cnt=${vnf_cpus} | cpu_node=${dut2_numa} -| | ... | cpu_skip=${cpu_skip} | smt_used=${False} | filename=/tmp/vnf${i}.conf -| | ... | i=${i_int} - -| L2 Bridge Domain Binary Search -| | ... -| | [Arguments] | ${framesize} | ${min_rate} | ${wt} | ${rxq} | ${search_type} -| | ... -| | # Test Variables required for test execution and test teardown -| | Set Test Variable | ${framesize} -| | ${get_framesize}= | Get Frame Size | ${framesize} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} -| | Set Test Variable | ${min_rate} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | ${dut1_if1_name}= | Get interface name | ${dut1} | ${dut1_if1} -| | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2} -| | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1} -| | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2} -| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} -| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} -| | Create Kubernetes VSWITCH startup config on all DUTs | ${get_framesize} -| | ... | ${wt} | ${rxq} -| | Create Kubernetes VNF'1' startup config on all DUTs -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vswitch-vpp-cfg | vpp.conf=/tmp/vswitch.conf -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vnf1-vpp-cfg | vpp.conf=/tmp/vnf1.conf -| | Apply Kubernetes resource on node | ${dut1} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 -| | Apply Kubernetes resource on node | ${dut2} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 -| | Apply Kubernetes resource on node | ${dut1} -| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} -| | ... | $$VSWITCH_IF1$$=${dut1_if1_name} -| | ... | $$VSWITCH_IF2$$=${dut1_if2_name} -| | Apply Kubernetes resource on node | ${dut2} -| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} -| | ... | $$VSWITCH_IF1$$=${dut2_if1_name} -| | ... | $$VSWITCH_IF2$$=${dut2_if2_name} -| | Wait for Kubernetes PODs on all DUTs | ${nodes} | csit -| | Set Kubernetes PODs affinity on all DUTs | ${nodes} -| | Run Keyword If | '${search_type}' == 'NDR' -| | ... | Find NDR using binary search and pps -| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} -| | ... | ELSE IF | '${search_type}' == 'PDR' -| | ... | Find PDR using binary search and pps -| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} -| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} - -*** Test Cases *** -| tc01-64B-1t1c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 64B | 1C | NDRDISC -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${64} | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR - -| tc02-64B-1t1c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${64} | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR - -| tc03-IMIX-1t1c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 1C | NDRDISC -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR - -| tc04-IMIX-1t1c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 1C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR - -| tc05-1518B-1t1c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 1518B | 1C | NDRDISC -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR - -| tc06-1518B-1t1c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR - -| tc07-64B-2t2c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 64B | 2C | NDRDISC -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${64} | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR - -| tc08-64B-2t2c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${64} | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR - -| tc09-IMIX-2t2c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 2C | NDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR - -| tc10-IMIX-2t2c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 2C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR - -| tc11-1518B-2t2c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 1518B | 2C | NDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR - -| tc12-1518B-2t2c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr.robot b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr.robot new file mode 100644 index 0000000000..10d2f4d9c2 --- /dev/null +++ b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr.robot @@ -0,0 +1,171 @@ +# Copyright (c) 2017 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | L2BDBASE | SCALE | MEMIF +| ... | K8S | 1VSWITCH | 2VNF | VPP_AGENT | SFC_CONTROLLER | HORIZONTAL +| ... +| Suite Setup | Set up 3-node performance topology with DUT's NIC model +| ... | L2 | Intel-X710 +| ... +| Test Setup | Set up performance test with Ligato Kubernetes +| ... +| Suite Teardown | Tear down 3-node performance topology +| ... +| Test Teardown | Tear down performance test with Ligato Kubernetes +| ... +| Test Template | Local Template +| ... +| Documentation | *RFC2544: Pkt throughput L2BD test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with two L2 +| ... | bridge domains and MAC learning enabled. DUT1 and DUT2 tested with +| ... | 2p10GE NIC X710 by Intel. +| ... | VNF Containers are connected to VSWITCH container via Memif interface. +| ... | All containers are running same VPP version. Containers are deployed +| ... | with Kubernetes. Configuration is applied by vnf-agent. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop +| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage +| ... | of packets transmitted. NDR and PDR are discovered for different +| ... | Ethernet L2 frame sizes using MLRsearch library. +| ... | TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, 253 flows per flow-group) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static +| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +# X710 bandwidth limit +| ${s_limit} | ${10000000000} +# SFC profile +| ${sfc_profile} | configmaps/eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz +# Traffic profile: +| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 +# CPU settings +| ${system_cpus}= | ${1} +| ${vswitch_cpus}= | ${5} +| ${vnf_cpus}= | ${2} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs Container orchestrated config. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | ${framesize} +| | Set Test Variable | ${min_rate} | ${10000} +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo +| | ... | ${s_limit} | ${framesize} +| | ... +| | ${dut1_if1_name}= | Get interface name | ${dut1} | ${dut1_if1} +| | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2} +| | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1} +| | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2} +| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} +| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} +| | Create Kubernetes VSWITCH startup config on all DUTs +| | ... | ${phy_cores} | ${rxq} | ${jumbo} +| | Create Kubernetes VNF'1' startup config on all DUTs +| | Create Kubernetes VNF'2' startup config on all DUTs +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vswitch-vpp-cfg | vpp.conf=/tmp/vswitch.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf1-vpp-cfg | vpp.conf=/tmp/vnf1.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf2-vpp-cfg | vpp.conf=/tmp/vnf2.conf +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut1_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut1_if2_name} +| | Apply Kubernetes resource on node | ${dut2} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut2_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut2_if2_name} +| | Wait for Kubernetes PODs on all DUTs | ${nodes} | csit +| | Set Kubernetes PODs affinity on all DUTs | ${nodes} +| | Find NDR and PDR intervals using optimized search +| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} + +*** Test Cases *** +| tc01-64B-1c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | 64B | 1C +| | framesize=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | 64B | 2C +| | framesize=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | 64B | 4C +| | framesize=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} + diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdrdisc.robot b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdrdisc.robot deleted file mode 100644 index 0c781a6476..0000000000 --- a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdrdisc.robot +++ /dev/null @@ -1,313 +0,0 @@ -# Copyright (c) 2018 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC -| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | L2BDBASE | SCALE | MEMIF -| ... | K8S | 1VSWITCH | 2VNF | VPP_AGENT | SFC_CONTROLLER | HORIZONTAL -| ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L2 | Intel-X710 -| ... -| Test Setup | Set up performance test with Ligato Kubernetes -| ... -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Teardown | Tear down performance test with Ligato Kubernetes -| ... -| Documentation | *RFC2544: Pkt throughput L2BD test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with two L2 -| ... | bridge domains and MAC learning enabled. DUT1 and DUT2 tested with -| ... | 2p10GE NIC X710 by Intel. -| ... | VNF Containers are connected to VSWITCH container via Memif interface. -| ... | All containers are running same VPP version. Containers are deployed -| ... | with Kubernetes. Configuration is applied by vnf-agent. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage -| ... | of packets transmitted. NDR and PDR are discovered for different -| ... | Ethernet L2 frame sizes using either binary search or linear search -| ... | algorithms with configured starting rate and final step that determines -| ... | throughput measurement resolution. Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 254 flows per flow-group) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static -| ... | payload. MAC addresses are matching MAC addresses of the TG node -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -# X710 bandwidth limit -| ${s_limit} | ${10000000000} -# SFC profile -| ${sfc_profile} | configmaps/eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz -# Traffic profile: -| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 -# CPU settings -| ${system_cpus}= | ${1} -| ${vswitch_cpus}= | ${5} -| ${vnf_cpus}= | ${2} - -*** Keywords *** -| Create Kubernetes VSWITCH startup config on all DUTs -| | [Documentation] | Create base startup configuration of VSWITCH in Kubernetes -| | ... | deploy to all DUTs. -| | ... -| | ... | *Arguments:* -| | ... | - ${framesize} - L2 framesize. Type: integer -| | ... | - ${wt} - Worker threads. Type: integer -| | ... | - ${rxq} - RX queues. Type: integer -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Create Kubernetes VSWITCH startup config on all DUTs \| ${64} \ -| | ... | \| ${1} \| ${1} -| | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} -| | ${dut1_numa}= | Get interfaces numa node | ${dut1} -| | ... | ${dut1_if1} | ${dut1_if2} -| | ${dut2_numa}= | Get interfaces numa node | ${dut2} -| | ... | ${dut2_if1} | ${dut2_if2} -| | ${dut1_if1_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if1} -| | ${dut1_if2_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if2} -| | ${dut2_if1_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if1} -| | ${dut2_if2_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if2} -| | ${cpu_cnt}= | Evaluate | ${wt}+1 -| | ${config}= | Run keyword | Create Kubernetes VSWITCH startup config -| | ... | node=${dut1} | cpu_cnt=${cpu_cnt} | cpu_node=${dut1_numa} -| | ... | cpu_skip=${system_cpus} | smt_used=${False} -| | ... | filename=/tmp/vswitch.conf | framesize=${framesize} | rxq=${rxq} -| | ... | if1=${dut1_if1_pci} | if2=${dut1_if2_pci} -| | ${config}= | Run keyword | Create Kubernetes VSWITCH startup config -| | ... | node=${dut2} | cpu_cnt=${cpu_cnt} | cpu_node=${dut2_numa} -| | ... | cpu_skip=${system_cpus} | smt_used=${False} -| | ... | filename=/tmp/vswitch.conf | framesize=${framesize} | rxq=${rxq} -| | ... | if1=${dut2_if1_pci} | if2=${dut2_if2_pci} - -| Create Kubernetes VNF'${i}' startup config on all DUTs -| | [Documentation] | Create base startup configuration of VNF in Kubernetes -| | ... | deploy to all DUTs. -| | ... -| | ${i_int}= | Convert To Integer | ${i} -| | ${cpu_skip}= | Evaluate | ${vswitch_cpus}+${system_cpus} -| | ${dut1_numa}= | Get interfaces numa node | ${dut1} -| | ... | ${dut1_if1} | ${dut1_if2} -| | ${dut2_numa}= | Get interfaces numa node | ${dut2} -| | ... | ${dut2_if1} | ${dut2_if2} -| | ${config}= | Run keyword | Create Kubernetes VNF startup config -| | ... | node=${dut1} | cpu_cnt=${vnf_cpus} | cpu_node=${dut1_numa} -| | ... | cpu_skip=${cpu_skip} | smt_used=${False} | filename=/tmp/vnf${i}.conf -| | ... | i=${i_int} -| | ${config}= | Run keyword | Create Kubernetes VNF startup config -| | ... | node=${dut2} | cpu_cnt=${vnf_cpus} | cpu_node=${dut2_numa} -| | ... | cpu_skip=${cpu_skip} | smt_used=${False} | filename=/tmp/vnf${i}.conf -| | ... | i=${i_int} - -| L2 Bridge Domain Binary Search -| | ... -| | [Arguments] | ${framesize} | ${min_rate} | ${wt} | ${rxq} | ${search_type} -| | ... -| | # Test Variables required for test execution and test teardown -| | Set Test Variable | ${framesize} -| | ${get_framesize}= | Get Frame Size | ${framesize} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} -| | Set Test Variable | ${min_rate} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | ${dut1_if1_name}= | Get interface name | ${dut1} | ${dut1_if1} -| | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2} -| | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1} -| | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2} -| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} -| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} -| | Create Kubernetes VSWITCH startup config on all DUTs | ${get_framesize} -| | ... | ${wt} | ${rxq} -| | Create Kubernetes VNF'1' startup config on all DUTs -| | Create Kubernetes VNF'2' startup config on all DUTs -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vswitch-vpp-cfg | vpp.conf=/tmp/vswitch.conf -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vnf1-vpp-cfg | vpp.conf=/tmp/vnf1.conf -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vnf2-vpp-cfg | vpp.conf=/tmp/vnf2.conf -| | Apply Kubernetes resource on node | ${dut1} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 -| | Apply Kubernetes resource on node | ${dut2} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 -| | Apply Kubernetes resource on node | ${dut1} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 -| | Apply Kubernetes resource on node | ${dut2} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 -| | Apply Kubernetes resource on node | ${dut1} -| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} -| | ... | $$VSWITCH_IF1$$=${dut1_if1_name} -| | ... | $$VSWITCH_IF2$$=${dut1_if2_name} -| | Apply Kubernetes resource on node | ${dut2} -| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} -| | ... | $$VSWITCH_IF1$$=${dut2_if1_name} -| | ... | $$VSWITCH_IF2$$=${dut2_if2_name} -| | Wait for Kubernetes PODs on all DUTs | ${nodes} | csit -| | Set Kubernetes PODs affinity on all DUTs | ${nodes} -| | Run Keyword If | '${search_type}' == 'NDR' -| | ... | Find NDR using binary search and pps -| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} -| | ... | ELSE IF | '${search_type}' == 'PDR' -| | ... | Find PDR using binary search and pps -| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} -| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} - -*** Test Cases *** -| tc01-64B-1t1c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 64B | 1C | NDRDISC -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${64} | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR - -| tc02-64B-1t1c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${64} | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR - -| tc03-IMIX-1t1c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 1C | NDRDISC -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR - -| tc04-IMIX-1t1c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 1C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR - -| tc05-1518B-1t1c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 1518B | 1C | NDRDISC -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR - -| tc06-1518B-1t1c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR - -| tc07-64B-2t2c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 64B | 2C | NDRDISC -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${64} | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR - -| tc08-64B-2t2c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${64} | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR - -| tc09-IMIX-2t2c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 2C | NDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR - -| tc10-IMIX-2t2c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 2C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR - -| tc11-1518B-2t2c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 1518B | 2C | NDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR - -| tc12-1518B-2t2c-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr.robot b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr.robot new file mode 100644 index 0000000000..afead74273 --- /dev/null +++ b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr.robot @@ -0,0 +1,185 @@ +# Copyright (c) 2017 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | L2BDBASE | SCALE | MEMIF +| ... | K8S | 1VSWITCH | 4VNF | VPP_AGENT | SFC_CONTROLLER | HORIZONTAL +| ... +| Suite Setup | Set up 3-node performance topology with DUT's NIC model +| ... | L2 | Intel-X710 +| ... +| Test Setup | Set up performance test with Ligato Kubernetes +| ... +| Suite Teardown | Tear down 3-node performance topology +| ... +| Test Teardown | Tear down performance test with Ligato Kubernetes +| ... +| Test Template | Local Template +| ... +| Documentation | *RFC2544: Pkt throughput L2BD test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with two L2 +| ... | bridge domains and MAC learning enabled. DUT1 and DUT2 tested with +| ... | 2p10GE NIC X710 by Intel. +| ... | VNF Containers are connected to VSWITCH container via Memif interface. +| ... | All containers are running same VPP version. Containers are deployed +| ... | with Kubernetes. Configuration is applied by vnf-agent. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop +| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage +| ... | of packets transmitted. NDR and PDR are discovered for different +| ... | Ethernet L2 frame sizes using MLRsearch library. +| ... | TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, 253 flows per flow-group) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static +| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +# X710 bandwidth limit +| ${s_limit} | ${10000000000} +# SFC profile +| ${sfc_profile} | configmaps/eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz +# Traffic profile: +| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 +# CPU settings +| ${system_cpus}= | ${1} +| ${vswitch_cpus}= | ${5} +| ${vnf_cpus}= | ${2} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs Container orchestrated config. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | ${framesize} +| | Set Test Variable | ${min_rate} | ${10000} +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo +| | ... | ${s_limit} | ${framesize} +| | ... +| | ${dut1_if1_name}= | Get interface name | ${dut1} | ${dut1_if1} +| | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2} +| | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1} +| | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2} +| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} +| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} +| | Create Kubernetes VSWITCH startup config on all DUTs +| | ... | ${phy_cores} | ${rxq} | ${jumbo} +| | Create Kubernetes VNF'1' startup config on all DUTs +| | Create Kubernetes VNF'2' startup config on all DUTs +| | Create Kubernetes VNF'3' startup config on all DUTs +| | Create Kubernetes VNF'4' startup config on all DUTs +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vswitch-vpp-cfg | vpp.conf=/tmp/vswitch.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf1-vpp-cfg | vpp.conf=/tmp/vnf1.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf2-vpp-cfg | vpp.conf=/tmp/vnf2.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf3-vpp-cfg | vpp.conf=/tmp/vnf3.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf4-vpp-cfg | vpp.conf=/tmp/vnf4.conf +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf3 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf3 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf4 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf4 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut1_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut1_if2_name} +| | Apply Kubernetes resource on node | ${dut2} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut2_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut2_if2_name} +| | Wait for Kubernetes PODs on all DUTs | ${nodes} | csit +| | Set Kubernetes PODs affinity on all DUTs | ${nodes} +| | Find NDR and PDR intervals using optimized search +| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} + +*** Test Cases *** +| tc01-64B-1c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | 64B | 1C +| | framesize=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | 64B | 2C +| | framesize=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | 64B | 4C +| | framesize=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} + diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdrdisc.robot b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdrdisc.robot deleted file mode 100644 index 69f47af620..0000000000 --- a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdrdisc.robot +++ /dev/null @@ -1,327 +0,0 @@ -# Copyright (c) 2018 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC -| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | L2BDBASE | SCALE | MEMIF -| ... | K8S | 1VSWITCH | 4VNF | VPP_AGENT | SFC_CONTROLLER | HORIZONTAL -| ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L2 | Intel-X710 -| ... -| Test Setup | Set up performance test with Ligato Kubernetes -| ... -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Teardown | Tear down performance test with Ligato Kubernetes -| ... -| Documentation | *RFC2544: Pkt throughput L2BD test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with two L2 -| ... | bridge domains and MAC learning enabled. DUT1 and DUT2 tested with -| ... | 2p10GE NIC X710 by Intel. -| ... | VNF Containers are connected to VSWITCH container via Memif interface. -| ... | All containers are running same VPP version. Containers are deployed -| ... | with Kubernetes. Configuration is applied by vnf-agent. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage -| ... | of packets transmitted. NDR and PDR are discovered for different -| ... | Ethernet L2 frame sizes using either binary search or linear search -| ... | algorithms with configured starting rate and final step that determines -| ... | throughput measurement resolution. Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 254 flows per flow-group) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static -| ... | payload. MAC addresses are matching MAC addresses of the TG node -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -# X710 bandwidth limit -| ${s_limit} | ${10000000000} -# SFC profile -| ${sfc_profile} | configmaps/eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz -# Traffic profile: -| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 -# CPU settings -| ${system_cpus}= | ${1} -| ${vswitch_cpus}= | ${5} -| ${vnf_cpus}= | ${2} - -*** Keywords *** -| Create Kubernetes VSWITCH startup config on all DUTs -| | [Documentation] | Create base startup configuration of VSWITCH in Kubernetes -| | ... | deploy to all DUTs. -| | ... -| | ... | *Arguments:* -| | ... | - ${framesize} - L2 framesize. Type: integer -| | ... | - ${wt} - Worker threads. Type: integer -| | ... | - ${rxq} - RX queues. Type: integer -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Create Kubernetes VSWITCH startup config on all DUTs \| ${64} \ -| | ... | \| ${1} \| ${1} -| | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} -| | ${dut1_numa}= | Get interfaces numa node | ${dut1} -| | ... | ${dut1_if1} | ${dut1_if2} -| | ${dut2_numa}= | Get interfaces numa node | ${dut2} -| | ... | ${dut2_if1} | ${dut2_if2} -| | ${dut1_if1_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if1} -| | ${dut1_if2_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if2} -| | ${dut2_if1_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if1} -| | ${dut2_if2_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if2} -| | ${cpu_cnt}= | Evaluate | ${wt}+1 -| | ${config}= | Run keyword | Create Kubernetes VSWITCH startup config -| | ... | node=${dut1} | cpu_cnt=${cpu_cnt} | cpu_node=${dut1_numa} -| | ... | cpu_skip=${system_cpus} | smt_used=${False} -| | ... | filename=/tmp/vswitch.conf | framesize=${framesize} | rxq=${rxq} -| | ... | if1=${dut1_if1_pci} | if2=${dut1_if2_pci} -| | ${config}= | Run keyword | Create Kubernetes VSWITCH startup config -| | ... | node=${dut2} | cpu_cnt=${cpu_cnt} | cpu_node=${dut2_numa} -| | ... | cpu_skip=${system_cpus} | smt_used=${False} -| | ... | filename=/tmp/vswitch.conf | framesize=${framesize} | rxq=${rxq} -| | ... | if1=${dut2_if1_pci} | if2=${dut2_if2_pci} - -| Create Kubernetes VNF'${i}' startup config on all DUTs -| | [Documentation] | Create base startup configuration of VNF in Kubernetes -| | ... | deploy to all DUTs. -| | ... -| | ${i_int}= | Convert To Integer | ${i} -| | ${cpu_skip}= | Evaluate | ${vswitch_cpus}+${system_cpus} -| | ${dut1_numa}= | Get interfaces numa node | ${dut1} -| | ... | ${dut1_if1} | ${dut1_if2} -| | ${dut2_numa}= | Get interfaces numa node | ${dut2} -| | ... | ${dut2_if1} | ${dut2_if2} -| | ${config}= | Run keyword | Create Kubernetes VNF startup config -| | ... | node=${dut1} | cpu_cnt=${vnf_cpus} | cpu_node=${dut1_numa} -| | ... | cpu_skip=${cpu_skip} | smt_used=${False} | filename=/tmp/vnf${i}.conf -| | ... | i=${i_int} -| | ${config}= | Run keyword | Create Kubernetes VNF startup config -| | ... | node=${dut2} | cpu_cnt=${vnf_cpus} | cpu_node=${dut2_numa} -| | ... | cpu_skip=${cpu_skip} | smt_used=${False} | filename=/tmp/vnf${i}.conf -| | ... | i=${i_int} - -| L2 Bridge Domain Binary Search -| | ... -| | [Arguments] | ${framesize} | ${min_rate} | ${wt} | ${rxq} | ${search_type} -| | ... -| | # Test Variables required for test execution and test teardown -| | Set Test Variable | ${framesize} -| | ${get_framesize}= | Get Frame Size | ${framesize} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} -| | Set Test Variable | ${min_rate} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | ${dut1_if1_name}= | Get interface name | ${dut1} | ${dut1_if1} -| | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2} -| | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1} -| | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2} -| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} -| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} -| | Create Kubernetes VSWITCH startup config on all DUTs | ${get_framesize} -| | ... | ${wt} | ${rxq} -| | Create Kubernetes VNF'1' startup config on all DUTs -| | Create Kubernetes VNF'2' startup config on all DUTs -| | Create Kubernetes VNF'3' startup config on all DUTs -| | Create Kubernetes VNF'4' startup config on all DUTs -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vswitch-vpp-cfg | vpp.conf=/tmp/vswitch.conf -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vnf1-vpp-cfg | vpp.conf=/tmp/vnf1.conf -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vnf2-vpp-cfg | vpp.conf=/tmp/vnf2.conf -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vnf3-vpp-cfg | vpp.conf=/tmp/vnf3.conf -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vnf4-vpp-cfg | vpp.conf=/tmp/vnf4.conf -| | Apply Kubernetes resource on node | ${dut1} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 -| | Apply Kubernetes resource on node | ${dut2} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 -| | Apply Kubernetes resource on node | ${dut1} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 -| | Apply Kubernetes resource on node | ${dut2} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 -| | Apply Kubernetes resource on node | ${dut1} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf3 -| | Apply Kubernetes resource on node | ${dut2} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf3 -| | Apply Kubernetes resource on node | ${dut1} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf4 -| | Apply Kubernetes resource on node | ${dut2} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf4 -| | Apply Kubernetes resource on node | ${dut1} -| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} -| | ... | $$VSWITCH_IF1$$=${dut1_if1_name} -| | ... | $$VSWITCH_IF2$$=${dut1_if2_name} -| | Apply Kubernetes resource on node | ${dut2} -| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} -| | ... | $$VSWITCH_IF1$$=${dut2_if1_name} -| | ... | $$VSWITCH_IF2$$=${dut2_if2_name} -| | Wait for Kubernetes PODs on all DUTs | ${nodes} | csit -| | Set Kubernetes PODs affinity on all DUTs | ${nodes} -| | Run Keyword If | '${search_type}' == 'NDR' -| | ... | Find NDR using binary search and pps -| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} -| | ... | ELSE IF | '${search_type}' == 'PDR' -| | ... | Find PDR using binary search and pps -| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} -| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} - -*** Test Cases *** -| tc01-64B-1t1c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 64B | 1C | NDRDISC -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${64} | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR - -| tc02-64B-1t1c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${64} | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR - -| tc03-IMIX-1t1c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 1C | NDRDISC -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR - -| tc04-IMIX-1t1c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 1C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR - -| tc05-1518B-1t1c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 1518B | 1C | NDRDISC -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR - -| tc06-1518B-1t1c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR - -| tc07-64B-2t2c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 64B | 2C | NDRDISC -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${64} | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR - -| tc08-64B-2t2c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${64} | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR - -| tc09-IMIX-2t2c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 2C | NDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR - -| tc10-IMIX-2t2c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 2C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR - -| tc11-1518B-2t2c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 1518B | 2C | NDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR - -| tc12-1518B-2t2c-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr.robot b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr.robot new file mode 100644 index 0000000000..b0abe57f48 --- /dev/null +++ b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr.robot @@ -0,0 +1,171 @@ +# Copyright (c) 2017 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | L2BDBASE | SCALE | MEMIF +| ... | K8S | 1VSWITCH | 2VNF | VPP_AGENT | SFC_CONTROLLER | CHAIN +| ... +| Suite Setup | Set up 3-node performance topology with DUT's NIC model +| ... | L2 | Intel-X710 +| ... +| Test Setup | Set up performance test with Ligato Kubernetes +| ... +| Suite Teardown | Tear down 3-node performance topology +| ... +| Test Teardown | Tear down performance test with Ligato Kubernetes +| ... +| Test Template | Local Template +| ... +| Documentation | *RFC2544: Pkt throughput L2BD test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with two L2 +| ... | bridge domains and MAC learning enabled. DUT1 and DUT2 tested with +| ... | 2p10GE NIC X710 by Intel. +| ... | VNF Containers are connected to VSWITCH container via Memif interface. +| ... | All containers are running same VPP version. Containers are deployed +| ... | with Kubernetes. Configuration is applied by vnf-agent. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop +| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage +| ... | of packets transmitted. NDR and PDR are discovered for different +| ... | Ethernet L2 frame sizes using MLRsearch library. +| ... | TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, 253 flows per flow-group) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static +| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +# X710 bandwidth limit +| ${s_limit} | ${10000000000} +# SFC profile +| ${sfc_profile} | configmaps/eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain +# Traffic profile: +| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 +# CPU settings +| ${system_cpus}= | ${1} +| ${vswitch_cpus}= | ${5} +| ${vnf_cpus}= | ${2} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs Container orchestrated config. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | ${framesize} +| | Set Test Variable | ${min_rate} | ${10000} +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo +| | ... | ${s_limit} | ${framesize} +| | ... +| | ${dut1_if1_name}= | Get interface name | ${dut1} | ${dut1_if1} +| | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2} +| | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1} +| | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2} +| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} +| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} +| | Create Kubernetes VSWITCH startup config on all DUTs +| | ... | ${phy_cores} | ${rxq} | ${jumbo} +| | Create Kubernetes VNF'1' startup config on all DUTs +| | Create Kubernetes VNF'2' startup config on all DUTs +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vswitch-vpp-cfg | vpp.conf=/tmp/vswitch.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf1-vpp-cfg | vpp.conf=/tmp/vnf1.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf2-vpp-cfg | vpp.conf=/tmp/vnf2.conf +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut1_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut1_if2_name} +| | Apply Kubernetes resource on node | ${dut2} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut2_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut2_if2_name} +| | Wait for Kubernetes PODs on all DUTs | ${nodes} | csit +| | Set Kubernetes PODs affinity on all DUTs | ${nodes} +| | Find NDR and PDR intervals using optimized search +| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} + +*** Test Cases *** +| tc01-64B-1c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | 64B | 1C +| | framesize=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | 64B | 2C +| | framesize=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | 64B | 4C +| | framesize=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} + diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-ndrpdrdisc.robot b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-ndrpdrdisc.robot deleted file mode 100644 index 62dcb51c07..0000000000 --- a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-ndrpdrdisc.robot +++ /dev/null @@ -1,313 +0,0 @@ -# Copyright (c) 2018 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC -| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | L2BDBASE | SCALE | MEMIF -| ... | K8S | 1VSWITCH | 2VNF | VPP_AGENT | SFC_CONTROLLER | CHAIN -| ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L2 | Intel-X710 -| ... -| Test Setup | Set up performance test with Ligato Kubernetes -| ... -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Teardown | Tear down performance test with Ligato Kubernetes -| ... -| Documentation | *RFC2544: Pkt throughput L2BD test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with two L2 -| ... | bridge domains and MAC learning enabled. DUT1 and DUT2 tested with -| ... | 2p10GE NIC X710 by Intel. -| ... | VNF Containers are connected to VSWITCH container via Memif interface. -| ... | All containers are running same VPP version. Containers are deployed -| ... | with Kubernetes. Configuration is applied by vnf-agent. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage -| ... | of packets transmitted. NDR and PDR are discovered for different -| ... | Ethernet L2 frame sizes using either binary search or linear search -| ... | algorithms with configured starting rate and final step that determines -| ... | throughput measurement resolution. Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 254 flows per flow-group) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static -| ... | payload. MAC addresses are matching MAC addresses of the TG node -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -# X710 bandwidth limit -| ${s_limit} | ${10000000000} -# SFC profile -| ${sfc_profile} | configmaps/eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain -# Traffic profile: -| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 -# CPU settings -| ${system_cpus}= | ${1} -| ${vswitch_cpus}= | ${5} -| ${vnf_cpus}= | ${2} - -*** Keywords *** -| Create Kubernetes VSWITCH startup config on all DUTs -| | [Documentation] | Create base startup configuration of VSWITCH in Kubernetes -| | ... | deploy to all DUTs. -| | ... -| | ... | *Arguments:* -| | ... | - ${framesize} - L2 framesize. Type: integer -| | ... | - ${wt} - Worker threads. Type: integer -| | ... | - ${rxq} - RX queues. Type: integer -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Create Kubernetes VSWITCH startup config on all DUTs \| ${64} \ -| | ... | \| ${1} \| ${1} -| | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} -| | ${dut1_numa}= | Get interfaces numa node | ${dut1} -| | ... | ${dut1_if1} | ${dut1_if2} -| | ${dut2_numa}= | Get interfaces numa node | ${dut2} -| | ... | ${dut2_if1} | ${dut2_if2} -| | ${dut1_if1_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if1} -| | ${dut1_if2_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if2} -| | ${dut2_if1_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if1} -| | ${dut2_if2_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if2} -| | ${cpu_cnt}= | Evaluate | ${wt}+1 -| | ${config}= | Run keyword | Create Kubernetes VSWITCH startup config -| | ... | node=${dut1} | cpu_cnt=${cpu_cnt} | cpu_node=${dut1_numa} -| | ... | cpu_skip=${system_cpus} | smt_used=${False} -| | ... | filename=/tmp/vswitch.conf | framesize=${framesize} | rxq=${rxq} -| | ... | if1=${dut1_if1_pci} | if2=${dut1_if2_pci} -| | ${config}= | Run keyword | Create Kubernetes VSWITCH startup config -| | ... | node=${dut2} | cpu_cnt=${cpu_cnt} | cpu_node=${dut2_numa} -| | ... | cpu_skip=${system_cpus} | smt_used=${False} -| | ... | filename=/tmp/vswitch.conf | framesize=${framesize} | rxq=${rxq} -| | ... | if1=${dut2_if1_pci} | if2=${dut2_if2_pci} - -| Create Kubernetes VNF'${i}' startup config on all DUTs -| | [Documentation] | Create base startup configuration of VNF in Kubernetes -| | ... | deploy to all DUTs. -| | ... -| | ${i_int}= | Convert To Integer | ${i} -| | ${cpu_skip}= | Evaluate | ${vswitch_cpus}+${system_cpus} -| | ${dut1_numa}= | Get interfaces numa node | ${dut1} -| | ... | ${dut1_if1} | ${dut1_if2} -| | ${dut2_numa}= | Get interfaces numa node | ${dut2} -| | ... | ${dut2_if1} | ${dut2_if2} -| | ${config}= | Run keyword | Create Kubernetes VNF startup config -| | ... | node=${dut1} | cpu_cnt=${vnf_cpus} | cpu_node=${dut1_numa} -| | ... | cpu_skip=${cpu_skip} | smt_used=${False} | filename=/tmp/vnf${i}.conf -| | ... | i=${i_int} -| | ${config}= | Run keyword | Create Kubernetes VNF startup config -| | ... | node=${dut2} | cpu_cnt=${vnf_cpus} | cpu_node=${dut2_numa} -| | ... | cpu_skip=${cpu_skip} | smt_used=${False} | filename=/tmp/vnf${i}.conf -| | ... | i=${i_int} - -| L2 Bridge Domain Binary Search -| | ... -| | [Arguments] | ${framesize} | ${min_rate} | ${wt} | ${rxq} | ${search_type} -| | ... -| | # Test Variables required for test execution and test teardown -| | Set Test Variable | ${framesize} -| | ${get_framesize}= | Get Frame Size | ${framesize} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} -| | Set Test Variable | ${min_rate} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | ${dut1_if1_name}= | Get interface name | ${dut1} | ${dut1_if1} -| | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2} -| | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1} -| | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2} -| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} -| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} -| | Create Kubernetes VSWITCH startup config on all DUTs | ${get_framesize} -| | ... | ${wt} | ${rxq} -| | Create Kubernetes VNF'1' startup config on all DUTs -| | Create Kubernetes VNF'2' startup config on all DUTs -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vswitch-vpp-cfg | vpp.conf=/tmp/vswitch.conf -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vnf1-vpp-cfg | vpp.conf=/tmp/vnf1.conf -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vnf2-vpp-cfg | vpp.conf=/tmp/vnf2.conf -| | Apply Kubernetes resource on node | ${dut1} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 -| | Apply Kubernetes resource on node | ${dut2} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 -| | Apply Kubernetes resource on node | ${dut1} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 -| | Apply Kubernetes resource on node | ${dut2} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 -| | Apply Kubernetes resource on node | ${dut1} -| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} -| | ... | $$VSWITCH_IF1$$=${dut1_if1_name} -| | ... | $$VSWITCH_IF2$$=${dut1_if2_name} -| | Apply Kubernetes resource on node | ${dut2} -| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} -| | ... | $$VSWITCH_IF1$$=${dut2_if1_name} -| | ... | $$VSWITCH_IF2$$=${dut2_if2_name} -| | Wait for Kubernetes PODs on all DUTs | ${nodes} | csit -| | Set Kubernetes PODs affinity on all DUTs | ${nodes} -| | Run Keyword If | '${search_type}' == 'NDR' -| | ... | Find NDR using binary search and pps -| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} -| | ... | ELSE IF | '${search_type}' == 'PDR' -| | ... | Find PDR using binary search and pps -| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} -| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} - -*** Test Cases *** -| tc01-64B-1t1c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 64B | 1C | NDRDISC -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${64} | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR - -| tc02-64B-1t1c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${64} | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR - -| tc03-IMIX-1t1c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 1C | NDRDISC -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR - -| tc04-IMIX-1t1c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 1C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR - -| tc05-1518B-1t1c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 1518B | 1C | NDRDISC -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR - -| tc06-1518B-1t1c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR - -| tc07-64B-2t2c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 64B | 2C | NDRDISC -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${64} | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR - -| tc08-64B-2t2c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${64} | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR - -| tc09-IMIX-2t2c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 2C | NDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR - -| tc10-IMIX-2t2c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 2C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR - -| tc11-1518B-2t2c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 1518B | 2C | NDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR - -| tc12-1518B-2t2c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr.robot b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr.robot new file mode 100644 index 0000000000..93e5747e8a --- /dev/null +++ b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr.robot @@ -0,0 +1,185 @@ +# Copyright (c) 2017 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | L2BDBASE | SCALE | MEMIF +| ... | K8S | 1VSWITCH | 4VNF | VPP_AGENT | SFC_CONTROLLER | CHAIN +| ... +| Suite Setup | Set up 3-node performance topology with DUT's NIC model +| ... | L2 | Intel-X710 +| ... +| Test Setup | Set up performance test with Ligato Kubernetes +| ... +| Suite Teardown | Tear down 3-node performance topology +| ... +| Test Teardown | Tear down performance test with Ligato Kubernetes +| ... +| Test Template | Local Template +| ... +| Documentation | *RFC2544: Pkt throughput L2BD test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with two L2 +| ... | bridge domains and MAC learning enabled. DUT1 and DUT2 tested with +| ... | 2p10GE NIC X710 by Intel. +| ... | VNF Containers are connected to VSWITCH container via Memif interface. +| ... | All containers are running same VPP version. Containers are deployed +| ... | with Kubernetes. Configuration is applied by vnf-agent. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop +| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage +| ... | of packets transmitted. NDR and PDR are discovered for different +| ... | Ethernet L2 frame sizes using MLRsearch library. +| ... | TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, 253 flows per flow-group) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static +| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +# X710 bandwidth limit +| ${s_limit} | ${10000000000} +# SFC profile +| ${sfc_profile} | configmaps/eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain +# Traffic profile: +| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 +# CPU settings +| ${system_cpus}= | ${1} +| ${vswitch_cpus}= | ${5} +| ${vnf_cpus}= | ${2} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs Container orchestrated config. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | ${framesize} +| | Set Test Variable | ${min_rate} | ${10000} +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo +| | ... | ${s_limit} | ${framesize} +| | ... +| | ${dut1_if1_name}= | Get interface name | ${dut1} | ${dut1_if1} +| | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2} +| | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1} +| | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2} +| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} +| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} +| | Create Kubernetes VSWITCH startup config on all DUTs +| | ... | ${phy_cores} | ${rxq} | ${jumbo} +| | Create Kubernetes VNF'1' startup config on all DUTs +| | Create Kubernetes VNF'2' startup config on all DUTs +| | Create Kubernetes VNF'3' startup config on all DUTs +| | Create Kubernetes VNF'4' startup config on all DUTs +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vswitch-vpp-cfg | vpp.conf=/tmp/vswitch.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf1-vpp-cfg | vpp.conf=/tmp/vnf1.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf2-vpp-cfg | vpp.conf=/tmp/vnf2.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf3-vpp-cfg | vpp.conf=/tmp/vnf3.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf4-vpp-cfg | vpp.conf=/tmp/vnf4.conf +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf3 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf3 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf4 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf4 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut1_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut1_if2_name} +| | Apply Kubernetes resource on node | ${dut2} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut2_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut2_if2_name} +| | Wait for Kubernetes PODs on all DUTs | ${nodes} | csit +| | Set Kubernetes PODs affinity on all DUTs | ${nodes} +| | Find NDR and PDR intervals using optimized search +| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} + +*** Test Cases *** +| tc01-64B-1c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | 64B | 1C +| | framesize=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | 64B | 2C +| | framesize=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | 64B | 4C +| | framesize=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} + diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-ndrpdrdisc.robot b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-ndrpdrdisc.robot deleted file mode 100644 index 5487118863..0000000000 --- a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-ndrpdrdisc.robot +++ /dev/null @@ -1,327 +0,0 @@ -# Copyright (c) 2018 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC -| ... | NIC_IntelX710 | ETH | L2BDMACLRN | L2BDBASE | SCALE | MEMIF -| ... | K8S | 1VSWITCH | 4VNF | VPP_AGENT | SFC_CONTROLLER | CHAIN -| ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L2 | Intel-X710 -| ... -| Test Setup | Set up performance test with Ligato Kubernetes -| ... -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Teardown | Tear down performance test with Ligato Kubernetes -| ... -| Documentation | *RFC2544: Pkt throughput L2BD test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with two L2 -| ... | bridge domains and MAC learning enabled. DUT1 and DUT2 tested with -| ... | 2p10GE NIC X710 by Intel. -| ... | VNF Containers are connected to VSWITCH container via Memif interface. -| ... | All containers are running same VPP version. Containers are deployed -| ... | with Kubernetes. Configuration is applied by vnf-agent. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage -| ... | of packets transmitted. NDR and PDR are discovered for different -| ... | Ethernet L2 frame sizes using either binary search or linear search -| ... | algorithms with configured starting rate and final step that determines -| ... | throughput measurement resolution. Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 254 flows per flow-group) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static -| ... | payload. MAC addresses are matching MAC addresses of the TG node -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -# X710 bandwidth limit -| ${s_limit} | ${10000000000} -# SFC profile -| ${sfc_profile} | configmaps/eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain -# Traffic profile: -| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 -# CPU settings -| ${system_cpus}= | ${1} -| ${vswitch_cpus}= | ${5} -| ${vnf_cpus}= | ${2} - -*** Keywords *** -| Create Kubernetes VSWITCH startup config on all DUTs -| | [Documentation] | Create base startup configuration of VSWITCH in Kubernetes -| | ... | deploy to all DUTs. -| | ... -| | ... | *Arguments:* -| | ... | - ${framesize} - L2 framesize. Type: integer -| | ... | - ${wt} - Worker threads. Type: integer -| | ... | - ${rxq} - RX queues. Type: integer -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Create Kubernetes VSWITCH startup config on all DUTs \| ${64} \ -| | ... | \| ${1} \| ${1} -| | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} -| | ${dut1_numa}= | Get interfaces numa node | ${dut1} -| | ... | ${dut1_if1} | ${dut1_if2} -| | ${dut2_numa}= | Get interfaces numa node | ${dut2} -| | ... | ${dut2_if1} | ${dut2_if2} -| | ${dut1_if1_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if1} -| | ${dut1_if2_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if2} -| | ${dut2_if1_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if1} -| | ${dut2_if2_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if2} -| | ${cpu_cnt}= | Evaluate | ${wt}+1 -| | ${config}= | Run keyword | Create Kubernetes VSWITCH startup config -| | ... | node=${dut1} | cpu_cnt=${cpu_cnt} | cpu_node=${dut1_numa} -| | ... | cpu_skip=${system_cpus} | smt_used=${False} -| | ... | filename=/tmp/vswitch.conf | framesize=${framesize} | rxq=${rxq} -| | ... | if1=${dut1_if1_pci} | if2=${dut1_if2_pci} -| | ${config}= | Run keyword | Create Kubernetes VSWITCH startup config -| | ... | node=${dut2} | cpu_cnt=${cpu_cnt} | cpu_node=${dut2_numa} -| | ... | cpu_skip=${system_cpus} | smt_used=${False} -| | ... | filename=/tmp/vswitch.conf | framesize=${framesize} | rxq=${rxq} -| | ... | if1=${dut2_if1_pci} | if2=${dut2_if2_pci} - -| Create Kubernetes VNF'${i}' startup config on all DUTs -| | [Documentation] | Create base startup configuration of VNF in Kubernetes -| | ... | deploy to all DUTs. -| | ... -| | ${i_int}= | Convert To Integer | ${i} -| | ${cpu_skip}= | Evaluate | ${vswitch_cpus}+${system_cpus} -| | ${dut1_numa}= | Get interfaces numa node | ${dut1} -| | ... | ${dut1_if1} | ${dut1_if2} -| | ${dut2_numa}= | Get interfaces numa node | ${dut2} -| | ... | ${dut2_if1} | ${dut2_if2} -| | ${config}= | Run keyword | Create Kubernetes VNF startup config -| | ... | node=${dut1} | cpu_cnt=${vnf_cpus} | cpu_node=${dut1_numa} -| | ... | cpu_skip=${cpu_skip} | smt_used=${False} | filename=/tmp/vnf${i}.conf -| | ... | i=${i_int} -| | ${config}= | Run keyword | Create Kubernetes VNF startup config -| | ... | node=${dut2} | cpu_cnt=${vnf_cpus} | cpu_node=${dut2_numa} -| | ... | cpu_skip=${cpu_skip} | smt_used=${False} | filename=/tmp/vnf${i}.conf -| | ... | i=${i_int} - -| L2 Bridge Domain Binary Search -| | ... -| | [Arguments] | ${framesize} | ${min_rate} | ${wt} | ${rxq} | ${search_type} -| | ... -| | # Test Variables required for test execution and test teardown -| | Set Test Variable | ${framesize} -| | ${get_framesize}= | Get Frame Size | ${framesize} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} -| | Set Test Variable | ${min_rate} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | ${dut1_if1_name}= | Get interface name | ${dut1} | ${dut1_if1} -| | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2} -| | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1} -| | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2} -| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} -| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} -| | Create Kubernetes VSWITCH startup config on all DUTs | ${get_framesize} -| | ... | ${wt} | ${rxq} -| | Create Kubernetes VNF'1' startup config on all DUTs -| | Create Kubernetes VNF'2' startup config on all DUTs -| | Create Kubernetes VNF'3' startup config on all DUTs -| | Create Kubernetes VNF'4' startup config on all DUTs -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vswitch-vpp-cfg | vpp.conf=/tmp/vswitch.conf -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vnf1-vpp-cfg | vpp.conf=/tmp/vnf1.conf -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vnf2-vpp-cfg | vpp.conf=/tmp/vnf2.conf -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vnf3-vpp-cfg | vpp.conf=/tmp/vnf3.conf -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vnf4-vpp-cfg | vpp.conf=/tmp/vnf4.conf -| | Apply Kubernetes resource on node | ${dut1} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 -| | Apply Kubernetes resource on node | ${dut2} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 -| | Apply Kubernetes resource on node | ${dut1} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 -| | Apply Kubernetes resource on node | ${dut2} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 -| | Apply Kubernetes resource on node | ${dut1} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf3 -| | Apply Kubernetes resource on node | ${dut2} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf3 -| | Apply Kubernetes resource on node | ${dut1} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf4 -| | Apply Kubernetes resource on node | ${dut2} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf4 -| | Apply Kubernetes resource on node | ${dut1} -| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} -| | ... | $$VSWITCH_IF1$$=${dut1_if1_name} -| | ... | $$VSWITCH_IF2$$=${dut1_if2_name} -| | Apply Kubernetes resource on node | ${dut2} -| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} -| | ... | $$VSWITCH_IF1$$=${dut2_if1_name} -| | ... | $$VSWITCH_IF2$$=${dut2_if2_name} -| | Wait for Kubernetes PODs on all DUTs | ${nodes} | csit -| | Set Kubernetes PODs affinity on all DUTs | ${nodes} -| | Run Keyword If | '${search_type}' == 'NDR' -| | ... | Find NDR using binary search and pps -| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} -| | ... | ELSE IF | '${search_type}' == 'PDR' -| | ... | Find PDR using binary search and pps -| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} -| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} - -*** Test Cases *** -| tc01-64B-1t1c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 64B | 1C | NDRDISC -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${64} | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR - -| tc02-64B-1t1c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${64} | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR - -| tc03-IMIX-1t1c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 1C | NDRDISC -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR - -| tc04-IMIX-1t1c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 1C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR - -| tc05-1518B-1t1c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 1518B | 1C | NDRDISC -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR - -| tc06-1518B-1t1c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR - -| tc07-64B-2t2c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 64B | 2C | NDRDISC -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${64} | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR - -| tc08-64B-2t2c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${64} | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR - -| tc09-IMIX-2t2c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 2C | NDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR - -| tc10-IMIX-2t2c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 2C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR - -| tc11-1518B-2t2c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 1518B | 2C | NDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR - -| tc12-1518B-2t2c-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr.robot b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr.robot new file mode 100644 index 0000000000..70a66a2cf4 --- /dev/null +++ b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr.robot @@ -0,0 +1,163 @@ +# Copyright (c) 2017 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | ETH | L2XCFWD | BASE | L2XCBASE | MEMIF +| ... | K8S | 1VSWITCH | 1VNF | VPP_AGENT | SFC_CONTROLLER | PARALLEL +| ... +| Suite Setup | Set up 3-node performance topology with DUT's NIC model +| ... | L2 | Intel-X710 +| ... +| Test Setup | Set up performance test with Ligato Kubernetes +| ... +| Suite Teardown | Tear down 3-node performance topology +| ... +| Test Teardown | Tear down performance test with Ligato Kubernetes +| ... +| Test Template | Local Template +| ... +| Documentation | *RFC2544: Pkt throughput L2XC test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross- +| ... | connect. DUT1 and DUT2 tested with 2p10GE NIC X710 by Intel. +| ... | VNF Container is connected to VSWITCH container via Memif interface. All +| ... | containers is running same VPP version. Containers are deployed with +| ... | Kubernetes. Configuration is applied by vnf-agent. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop +| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage +| ... | of packets transmitted. NDR and PDR are discovered for different +| ... | Ethernet L2 frame sizes using MLRsearch library. +| ... | TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, 253 flows per flow-group) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static +| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +# X710 bandwidth limit +| ${s_limit} | ${10000000000} +# SFC profile +| ${sfc_profile} | configmaps/eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral +# Traffic profile: +| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 +# CPU settings +| ${system_cpus}= | ${1} +| ${vswitch_cpus}= | ${5} +| ${vnf_cpus}= | ${2} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs Container orchestrated config. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | ${framesize} +| | Set Test Variable | ${min_rate} | ${10000} +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo +| | ... | ${s_limit} | ${framesize} +| | ... +| | ${dut1_if1_name}= | Get interface name | ${dut1} | ${dut1_if1} +| | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2} +| | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1} +| | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2} +| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} +| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} +| | Create Kubernetes VSWITCH startup config on all DUTs +| | ... | ${phy_cores} | ${rxq} | ${jumbo} +| | Create Kubernetes VNF'1' startup config on all DUTs +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vswitch-vpp-cfg | vpp.conf=/tmp/vswitch.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf1-vpp-cfg | vpp.conf=/tmp/vnf1.conf +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut1_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut1_if2_name} +| | Apply Kubernetes resource on node | ${dut2} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut2_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut2_if2_name} +| | Wait for Kubernetes PODs on all DUTs | ${nodes} | csit +| | Set Kubernetes PODs affinity on all DUTs | ${nodes} +| | Find NDR and PDR intervals using optimized search +| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} + +*** Test Cases *** +| tc01-64B-1c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr +| | [Tags] | 64B | 1C +| | framesize=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr +| | [Tags] | 64B | 2C +| | framesize=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr +| | [Tags] | 64B | 4C +| | framesize=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} + diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-ndrpdrdisc.robot b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-ndrpdrdisc.robot deleted file mode 100644 index 7d0d1e6dd6..0000000000 --- a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-ndrpdrdisc.robot +++ /dev/null @@ -1,303 +0,0 @@ -# Copyright (c) 2018 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC -| ... | NIC_Intel-X710 | ETH | L2XCFWD | BASE | L2XCBASE | MEMIF -| ... | K8S | 1VSWITCH | 1VNF | VPP_AGENT | SFC_CONTROLLER | PARALLEL -| ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L2 | Intel-X710 -| ... -| Test Setup | Set up performance test with Ligato Kubernetes -| ... -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Teardown | Tear down performance test with Ligato Kubernetes -| ... -| Documentation | *RFC2544: Pkt throughput L2XC test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross- -| ... | connect. DUT1 and DUT2 tested with 2p10GE NIC X710 by Intel. -| ... | VNF Container is connected to VSWITCH container via Memif interface. All -| ... | containers is running same VPP version. Containers are deployed with -| ... | Kubernetes. Configuration is applied by vnf-agent. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage -| ... | of packets transmitted. NDR and PDR are discovered for different -| ... | Ethernet L2 frame sizes using either binary search or linear search -| ... | algorithms with configured starting rate and final step that determines -| ... | throughput measurement resolution. Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 254 flows per flow-group) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static -| ... | payload. MAC addresses are matching MAC addresses of the TG node -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -# X710 bandwidth limit -| ${s_limit} | ${10000000000} -# SFC profile -| ${sfc_profile} | configmaps/eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral -# Traffic profile: -| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 -# CPU settings -| ${system_cpus}= | ${1} -| ${vswitch_cpus}= | ${5} -| ${vnf_cpus}= | ${2} - -*** Keywords *** -| Create Kubernetes VSWITCH startup config on all DUTs -| | [Documentation] | Create base startup configuration of VSWITCH in Kubernetes -| | ... | deploy to all DUTs. -| | ... -| | ... | *Arguments:* -| | ... | - ${framesize} - L2 framesize. Type: integer -| | ... | - ${wt} - Worker threads. Type: integer -| | ... | - ${rxq} - RX queues. Type: integer -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Create Kubernetes VSWITCH startup config on all DUTs \| ${64} \ -| | ... | \| ${1} \| ${1} -| | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} -| | ${dut1_numa}= | Get interfaces numa node | ${dut1} -| | ... | ${dut1_if1} | ${dut1_if2} -| | ${dut2_numa}= | Get interfaces numa node | ${dut2} -| | ... | ${dut2_if1} | ${dut2_if2} -| | ${dut1_if1_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if1} -| | ${dut1_if2_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if2} -| | ${dut2_if1_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if1} -| | ${dut2_if2_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if2} -| | ${cpu_cnt}= | Evaluate | ${wt}+1 -| | ${config}= | Run keyword | Create Kubernetes VSWITCH startup config -| | ... | node=${dut1} | cpu_cnt=${cpu_cnt} | cpu_node=${dut1_numa} -| | ... | cpu_skip=${system_cpus} | smt_used=${False} -| | ... | filename=/tmp/vswitch.conf | framesize=${framesize} | rxq=${rxq} -| | ... | if1=${dut1_if1_pci} | if2=${dut1_if2_pci} -| | ${config}= | Run keyword | Create Kubernetes VSWITCH startup config -| | ... | node=${dut2} | cpu_cnt=${cpu_cnt} | cpu_node=${dut2_numa} -| | ... | cpu_skip=${system_cpus} | smt_used=${False} -| | ... | filename=/tmp/vswitch.conf | framesize=${framesize} | rxq=${rxq} -| | ... | if1=${dut2_if1_pci} | if2=${dut2_if2_pci} - -| Create Kubernetes VNF'${i}' startup config on all DUTs -| | [Documentation] | Create base startup configuration of VNF in Kubernetes -| | ... | deploy to all DUTs. -| | ... -| | ${i_int}= | Convert To Integer | ${i} -| | ${cpu_skip}= | Evaluate | ${vswitch_cpus}+${system_cpus} -| | ${dut1_numa}= | Get interfaces numa node | ${dut1} -| | ... | ${dut1_if1} | ${dut1_if2} -| | ${dut2_numa}= | Get interfaces numa node | ${dut2} -| | ... | ${dut2_if1} | ${dut2_if2} -| | ${config}= | Run keyword | Create Kubernetes VNF startup config -| | ... | node=${dut1} | cpu_cnt=${vnf_cpus} | cpu_node=${dut1_numa} -| | ... | cpu_skip=${cpu_skip} | smt_used=${False} | filename=/tmp/vnf${i}.conf -| | ... | i=${i_int} -| | ${config}= | Run keyword | Create Kubernetes VNF startup config -| | ... | node=${dut2} | cpu_cnt=${vnf_cpus} | cpu_node=${dut2_numa} -| | ... | cpu_skip=${cpu_skip} | smt_used=${False} | filename=/tmp/vnf${i}.conf -| | ... | i=${i_int} - -| L2 Cross Connect Binary Search -| | ... -| | [Arguments] | ${framesize} | ${min_rate} | ${wt} | ${rxq} | ${search_type} -| | ... -| | # Test Variables required for test execution and test teardown -| | Set Test Variable | ${framesize} -| | ${get_framesize}= | Get Frame Size | ${framesize} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} -| | Set Test Variable | ${min_rate} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | ${dut1_if1_name}= | Get interface name | ${dut1} | ${dut1_if1} -| | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2} -| | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1} -| | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2} -| | Create Kubernetes VSWITCH startup config on all DUTs | ${get_framesize} -| | ... | ${wt} | ${rxq} -| | Create Kubernetes VNF'1' startup config on all DUTs -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vswitch-vpp-cfg | vpp.conf=/tmp/vswitch.conf -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vnf1-vpp-cfg | vpp.conf=/tmp/vnf1.conf -| | Apply Kubernetes resource on node | ${dut1} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 -| | Apply Kubernetes resource on node | ${dut2} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 -| | Apply Kubernetes resource on node | ${dut1} -| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} -| | ... | $$VSWITCH_IF1$$=${dut1_if1_name} -| | ... | $$VSWITCH_IF2$$=${dut1_if2_name} -| | Apply Kubernetes resource on node | ${dut2} -| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} -| | ... | $$VSWITCH_IF1$$=${dut2_if1_name} -| | ... | $$VSWITCH_IF2$$=${dut2_if2_name} -| | Wait for Kubernetes PODs on all DUTs | ${nodes} | csit -| | Set Kubernetes PODs affinity on all DUTs | ${nodes} -| | Run Keyword If | '${search_type}' == 'NDR' -| | ... | Find NDR using binary search and pps -| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} -| | ... | ELSE IF | '${search_type}' == 'PDR' -| | ... | Find PDR using binary search and pps -| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} -| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} - -*** Test Cases *** -| tc01-64B-1t1c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 64B | 1C | NDRDISC -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${64} | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR - -| tc02-64B-1t1c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${64} | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR - -| tc03-IMIX-1t1c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 1C | NDRDISC -| | [Template] | L2 Cross Connect Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR - -| tc04-IMIX-1t1c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 1C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR - -| tc05-1518B-1t1c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 1518B | 1C | NDRDISC -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR - -| tc06-1518B-1t1c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR - -| tc07-64B-2t2c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 64B | 2C | NDRDISC -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${64} | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR - -| tc08-64B-2t2c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${64} | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR - -| tc09-IMIX-2t2c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 2C | NDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR - -| tc10-IMIX-2t2c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 2C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR - -| tc11-1518B-2t2c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 1518B | 2C | NDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR - -| tc12-1518B-2t2c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr.robot b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr.robot new file mode 100644 index 0000000000..0298614afd --- /dev/null +++ b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr.robot @@ -0,0 +1,170 @@ +# Copyright (c) 2017 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | ETH | L2XCFWD | SCALE | L2XCBASE | MEMIF +| ... | K8S | 1VSWITCH | 2VNF | VPP_AGENT | SFC_CONTROLLER | HORIZONTAL +| ... +| Suite Setup | Set up 3-node performance topology with DUT's NIC model +| ... | L2 | Intel-X710 +| ... +| Test Setup | Set up performance test with Ligato Kubernetes +| ... +| Suite Teardown | Tear down 3-node performance topology +| ... +| Test Teardown | Tear down performance test with Ligato Kubernetes +| ... +| Test Template | Local Template +| ... +| Documentation | *RFC2544: Pkt throughput L2XC test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross- +| ... | connect. DUT1 and DUT2 tested with 2p10GE NIC X710 by Intel. +| ... | VNF Containers are connected to VSWITCH container via Memif interface. +| ... | All containers are running same VPP version. Containers are deployed +| ... | with Kubernetes. Configuration is applied by vnf-agent. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop +| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage +| ... | of packets transmitted. NDR and PDR are discovered for different +| ... | Ethernet L2 frame sizes using MLRsearch library. +| ... | TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, 253 flows per flow-group) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static +| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +# X710 bandwidth limit +| ${s_limit} | ${10000000000} +# SFC profile +| ${sfc_profile} | configmaps/eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz +# Traffic profile: +| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 +# CPU settings +| ${system_cpus}= | ${1} +| ${vswitch_cpus}= | ${5} +| ${vnf_cpus}= | ${2} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs Container orchestrated config. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | ${framesize} +| | Set Test Variable | ${min_rate} | ${10000} +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo +| | ... | ${s_limit} | ${framesize} +| | ... +| | ${dut1_if1_name}= | Get interface name | ${dut1} | ${dut1_if1} +| | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2} +| | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1} +| | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2} +| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} +| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} +| | Create Kubernetes VSWITCH startup config on all DUTs +| | ... | ${phy_cores} | ${rxq} | ${jumbo} +| | Create Kubernetes VNF'1' startup config on all DUTs +| | Create Kubernetes VNF'2' startup config on all DUTs +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vswitch-vpp-cfg | vpp.conf=/tmp/vswitch.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf1-vpp-cfg | vpp.conf=/tmp/vnf1.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf2-vpp-cfg | vpp.conf=/tmp/vnf2.conf +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut1_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut1_if2_name} +| | Apply Kubernetes resource on node | ${dut2} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut2_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut2_if2_name} +| | Wait for Kubernetes PODs on all DUTs | ${nodes} | csit +| | Set Kubernetes PODs affinity on all DUTs | ${nodes} +| | Find NDR and PDR intervals using optimized search +| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} + +*** Test Cases *** +| tc01-64B-1c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | 64B | 1C +| | framesize=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | 64B | 2C +| | framesize=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | 64B | 4C +| | framesize=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} + diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdrdisc.robot b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdrdisc.robot deleted file mode 100644 index 085968c17d..0000000000 --- a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdrdisc.robot +++ /dev/null @@ -1,310 +0,0 @@ -# Copyright (c) 2018 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC -| ... | NIC_Intel-X710 | ETH | L2XCFWD | SCALE | L2XCBASE | MEMIF -| ... | K8S | 1VSWITCH | 2VNF | VPP_AGENT | SFC_CONTROLLER | HORIZONTAL -| ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L2 | Intel-X710 -| ... -| Test Setup | Set up performance test with Ligato Kubernetes -| ... -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Teardown | Tear down performance test with Ligato Kubernetes -| ... -| Documentation | *RFC2544: Pkt throughput L2XC test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross- -| ... | connect. DUT1 and DUT2 tested with 2p10GE NIC X710 by Intel. -| ... | VNF Containers are connected to VSWITCH container via Memif interface. -| ... | All containers are running same VPP version. Containers are deployed -| ... | with Kubernetes. Configuration is applied by vnf-agent. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage -| ... | of packets transmitted. NDR and PDR are discovered for different -| ... | Ethernet L2 frame sizes using either binary search or linear search -| ... | algorithms with configured starting rate and final step that determines -| ... | throughput measurement resolution. Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 254 flows per flow-group) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static -| ... | payload. MAC addresses are matching MAC addresses of the TG node -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -# X710 bandwidth limit -| ${s_limit} | ${10000000000} -# SFC profile -| ${sfc_profile} | configmaps/eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz -# Traffic profile: -| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 -# CPU settings -| ${system_cpus}= | ${1} -| ${vswitch_cpus}= | ${5} -| ${vnf_cpus}= | ${2} - -*** Keywords *** -| Create Kubernetes VSWITCH startup config on all DUTs -| | [Documentation] | Create base startup configuration of VSWITCH in Kubernetes -| | ... | deploy to all DUTs. -| | ... -| | ... | *Arguments:* -| | ... | - ${framesize} - L2 framesize. Type: integer -| | ... | - ${wt} - Worker threads. Type: integer -| | ... | - ${rxq} - RX queues. Type: integer -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Create Kubernetes VSWITCH startup config on all DUTs \| ${64} \ -| | ... | \| ${1} \| ${1} -| | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} -| | ${dut1_numa}= | Get interfaces numa node | ${dut1} -| | ... | ${dut1_if1} | ${dut1_if2} -| | ${dut2_numa}= | Get interfaces numa node | ${dut2} -| | ... | ${dut2_if1} | ${dut2_if2} -| | ${dut1_if1_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if1} -| | ${dut1_if2_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if2} -| | ${dut2_if1_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if1} -| | ${dut2_if2_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if2} -| | ${cpu_cnt}= | Evaluate | ${wt}+1 -| | ${config}= | Run keyword | Create Kubernetes VSWITCH startup config -| | ... | node=${dut1} | cpu_cnt=${cpu_cnt} | cpu_node=${dut1_numa} -| | ... | cpu_skip=${system_cpus} | smt_used=${False} -| | ... | filename=/tmp/vswitch.conf | framesize=${framesize} | rxq=${rxq} -| | ... | if1=${dut1_if1_pci} | if2=${dut1_if2_pci} -| | ${config}= | Run keyword | Create Kubernetes VSWITCH startup config -| | ... | node=${dut2} | cpu_cnt=${cpu_cnt} | cpu_node=${dut2_numa} -| | ... | cpu_skip=${system_cpus} | smt_used=${False} -| | ... | filename=/tmp/vswitch.conf | framesize=${framesize} | rxq=${rxq} -| | ... | if1=${dut2_if1_pci} | if2=${dut2_if2_pci} - -| Create Kubernetes VNF'${i}' startup config on all DUTs -| | [Documentation] | Create base startup configuration of VNF in Kubernetes -| | ... | deploy to all DUTs. -| | ... -| | ${i_int}= | Convert To Integer | ${i} -| | ${cpu_skip}= | Evaluate | ${vswitch_cpus}+${system_cpus} -| | ${dut1_numa}= | Get interfaces numa node | ${dut1} -| | ... | ${dut1_if1} | ${dut1_if2} -| | ${dut2_numa}= | Get interfaces numa node | ${dut2} -| | ... | ${dut2_if1} | ${dut2_if2} -| | ${config}= | Run keyword | Create Kubernetes VNF startup config -| | ... | node=${dut1} | cpu_cnt=${vnf_cpus} | cpu_node=${dut1_numa} -| | ... | cpu_skip=${cpu_skip} | smt_used=${False} | filename=/tmp/vnf${i}.conf -| | ... | i=${i_int} -| | ${config}= | Run keyword | Create Kubernetes VNF startup config -| | ... | node=${dut2} | cpu_cnt=${vnf_cpus} | cpu_node=${dut2_numa} -| | ... | cpu_skip=${cpu_skip} | smt_used=${False} | filename=/tmp/vnf${i}.conf -| | ... | i=${i_int} - -| L2 Cross Connect Binary Search -| | ... -| | [Arguments] | ${framesize} | ${min_rate} | ${wt} | ${rxq} | ${search_type} -| | ... -| | # Test Variables required for test execution and test teardown -| | Set Test Variable | ${framesize} -| | ${get_framesize}= | Get Frame Size | ${framesize} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} -| | Set Test Variable | ${min_rate} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | ${dut1_if1_name}= | Get interface name | ${dut1} | ${dut1_if1} -| | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2} -| | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1} -| | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2} -| | Create Kubernetes VSWITCH startup config on all DUTs | ${get_framesize} -| | ... | ${wt} | ${rxq} -| | Create Kubernetes VNF'1' startup config on all DUTs -| | Create Kubernetes VNF'2' startup config on all DUTs -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vswitch-vpp-cfg | vpp.conf=/tmp/vswitch.conf -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vnf1-vpp-cfg | vpp.conf=/tmp/vnf1.conf -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vnf2-vpp-cfg | vpp.conf=/tmp/vnf2.conf -| | Apply Kubernetes resource on node | ${dut1} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 -| | Apply Kubernetes resource on node | ${dut2} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 -| | Apply Kubernetes resource on node | ${dut1} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 -| | Apply Kubernetes resource on node | ${dut2} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 -| | Apply Kubernetes resource on node | ${dut1} -| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} -| | ... | $$VSWITCH_IF1$$=${dut1_if1_name} -| | ... | $$VSWITCH_IF2$$=${dut1_if2_name} -| | Apply Kubernetes resource on node | ${dut2} -| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} -| | ... | $$VSWITCH_IF1$$=${dut2_if1_name} -| | ... | $$VSWITCH_IF2$$=${dut2_if2_name} -| | Wait for Kubernetes PODs on all DUTs | ${nodes} | csit -| | Set Kubernetes PODs affinity on all DUTs | ${nodes} -| | Run Keyword If | '${search_type}' == 'NDR' -| | ... | Find NDR using binary search and pps -| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} -| | ... | ELSE IF | '${search_type}' == 'PDR' -| | ... | Find PDR using binary search and pps -| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} -| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} - -*** Test Cases *** -| tc01-64B-1t1c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 64B | 1C | NDRDISC -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${64} | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR - -| tc02-64B-1t1c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${64} | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR - -| tc03-IMIX-1t1c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 1C | NDRDISC -| | [Template] | L2 Cross Connect Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR - -| tc04-IMIX-1t1c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 1C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR - -| tc05-1518B-1t1c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 1518B | 1C | NDRDISC -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR - -| tc06-1518B-1t1c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR - -| tc07-64B-2t2c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 64B | 2C | NDRDISC -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${64} | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR - -| tc08-64B-2t2c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${64} | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR - -| tc09-IMIX-2t2c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 2C | NDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR - -| tc10-IMIX-2t2c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 2C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR - -| tc11-1518B-2t2c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 1518B | 2C | NDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR - -| tc12-1518B-2t2c-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr.robot b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr.robot new file mode 100644 index 0000000000..a287b3c57d --- /dev/null +++ b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr.robot @@ -0,0 +1,184 @@ +# Copyright (c) 2017 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | ETH | L2XCFWD | SCALE | L2XCBASE | MEMIF +| ... | K8S | 1VSWITCH | 4VNF | VPP_AGENT | SFC_CONTROLLER | HORIZONTAL +| ... +| Suite Setup | Set up 3-node performance topology with DUT's NIC model +| ... | L2 | Intel-X710 +| ... +| Test Setup | Set up performance test with Ligato Kubernetes +| ... +| Suite Teardown | Tear down 3-node performance topology +| ... +| Test Teardown | Tear down performance test with Ligato Kubernetes +| ... +| Test Template | Local Template +| ... +| Documentation | *RFC2544: Pkt throughput L2XC test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross- +| ... | connect. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel. +| ... | VNF Containers are connected to VSWITCH container via Memif interface. +| ... | All containers are running same VPP version. Containers are deployed +| ... | with Kubernetes. Configuration is applied by vnf-agent. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop +| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage +| ... | of packets transmitted. NDR and PDR are discovered for different +| ... | Ethernet L2 frame sizes using MLRsearch library. +| ... | TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, 253 flows per flow-group) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static +| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +# X710 bandwidth limit +| ${s_limit} | ${10000000000} +# SFC profile +| ${sfc_profile} | configmaps/eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz +# Traffic profile: +| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 +# CPU settings +| ${system_cpus}= | ${1} +| ${vswitch_cpus}= | ${5} +| ${vnf_cpus}= | ${2} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs Container orchestrated config. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | ${framesize} +| | Set Test Variable | ${min_rate} | ${10000} +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo +| | ... | ${s_limit} | ${framesize} +| | ... +| | ${dut1_if1_name}= | Get interface name | ${dut1} | ${dut1_if1} +| | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2} +| | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1} +| | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2} +| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} +| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} +| | Create Kubernetes VSWITCH startup config on all DUTs +| | ... | ${phy_cores} | ${rxq} | ${jumbo} +| | Create Kubernetes VNF'1' startup config on all DUTs +| | Create Kubernetes VNF'2' startup config on all DUTs +| | Create Kubernetes VNF'3' startup config on all DUTs +| | Create Kubernetes VNF'4' startup config on all DUTs +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vswitch-vpp-cfg | vpp.conf=/tmp/vswitch.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf1-vpp-cfg | vpp.conf=/tmp/vnf1.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf2-vpp-cfg | vpp.conf=/tmp/vnf2.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf3-vpp-cfg | vpp.conf=/tmp/vnf3.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf4-vpp-cfg | vpp.conf=/tmp/vnf4.conf +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf3 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf3 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf4 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf4 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut1_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut1_if2_name} +| | Apply Kubernetes resource on node | ${dut2} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut2_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut2_if2_name} +| | Wait for Kubernetes PODs on all DUTs | ${nodes} | csit +| | Set Kubernetes PODs affinity on all DUTs | ${nodes} +| | Find NDR and PDR intervals using optimized search +| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} + +*** Test Cases *** +| tc01-64B-1c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | 64B | 1C +| | framesize=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | 64B | 2C +| | framesize=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | 64B | 4C +| | framesize=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} + diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdrdisc.robot b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdrdisc.robot deleted file mode 100644 index 1f7723aa83..0000000000 --- a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdrdisc.robot +++ /dev/null @@ -1,324 +0,0 @@ -# Copyright (c) 2018 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC -| ... | NIC_Intel-X710 | ETH | L2XCFWD | SCALE | L2XCBASE | MEMIF -| ... | K8S | 1VSWITCH | 4VNF | VPP_AGENT | SFC_CONTROLLER | HORIZONTAL -| ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L2 | Intel-X710 -| ... -| Test Setup | Set up performance test with Ligato Kubernetes -| ... -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Teardown | Tear down performance test with Ligato Kubernetes -| ... -| Documentation | *RFC2544: Pkt throughput L2XC test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross- -| ... | connect. DUT1 and DUT2 tested with 2p10GE NIC X710 by Intel. -| ... | VNF Containers are connected to VSWITCH container via Memif interface. -| ... | All containers are running same VPP version. Containers are deployed -| ... | with Kubernetes. Configuration is applied by vnf-agent. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage -| ... | of packets transmitted. NDR and PDR are discovered for different -| ... | Ethernet L2 frame sizes using either binary search or linear search -| ... | algorithms with configured starting rate and final step that determines -| ... | throughput measurement resolution. Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 254 flows per flow-group) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static -| ... | payload. MAC addresses are matching MAC addresses of the TG node -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -# X710 bandwidth limit -| ${s_limit} | ${10000000000} -# SFC profile -| ${sfc_profile} | configmaps/eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz -# Traffic profile: -| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 -# CPU settings -| ${system_cpus}= | ${1} -| ${vswitch_cpus}= | ${5} -| ${vnf_cpus}= | ${2} - -*** Keywords *** -| Create Kubernetes VSWITCH startup config on all DUTs -| | [Documentation] | Create base startup configuration of VSWITCH in Kubernetes -| | ... | deploy to all DUTs. -| | ... -| | ... | *Arguments:* -| | ... | - ${framesize} - L2 framesize. Type: integer -| | ... | - ${wt} - Worker threads. Type: integer -| | ... | - ${rxq} - RX queues. Type: integer -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Create Kubernetes VSWITCH startup config on all DUTs \| ${64} \ -| | ... | \| ${1} \| ${1} -| | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} -| | ${dut1_numa}= | Get interfaces numa node | ${dut1} -| | ... | ${dut1_if1} | ${dut1_if2} -| | ${dut2_numa}= | Get interfaces numa node | ${dut2} -| | ... | ${dut2_if1} | ${dut2_if2} -| | ${dut1_if1_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if1} -| | ${dut1_if2_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if2} -| | ${dut2_if1_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if1} -| | ${dut2_if2_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if2} -| | ${cpu_cnt}= | Evaluate | ${wt}+1 -| | ${config}= | Run keyword | Create Kubernetes VSWITCH startup config -| | ... | node=${dut1} | cpu_cnt=${cpu_cnt} | cpu_node=${dut1_numa} -| | ... | cpu_skip=${system_cpus} | smt_used=${False} -| | ... | filename=/tmp/vswitch.conf | framesize=${framesize} | rxq=${rxq} -| | ... | if1=${dut1_if1_pci} | if2=${dut1_if2_pci} -| | ${config}= | Run keyword | Create Kubernetes VSWITCH startup config -| | ... | node=${dut2} | cpu_cnt=${cpu_cnt} | cpu_node=${dut2_numa} -| | ... | cpu_skip=${system_cpus} | smt_used=${False} -| | ... | filename=/tmp/vswitch.conf | framesize=${framesize} | rxq=${rxq} -| | ... | if1=${dut2_if1_pci} | if2=${dut2_if2_pci} - -| Create Kubernetes VNF'${i}' startup config on all DUTs -| | [Documentation] | Create base startup configuration of VNF in Kubernetes -| | ... | deploy to all DUTs. -| | ... -| | ${i_int}= | Convert To Integer | ${i} -| | ${cpu_skip}= | Evaluate | ${vswitch_cpus}+${system_cpus} -| | ${dut1_numa}= | Get interfaces numa node | ${dut1} -| | ... | ${dut1_if1} | ${dut1_if2} -| | ${dut2_numa}= | Get interfaces numa node | ${dut2} -| | ... | ${dut2_if1} | ${dut2_if2} -| | ${config}= | Run keyword | Create Kubernetes VNF startup config -| | ... | node=${dut1} | cpu_cnt=${vnf_cpus} | cpu_node=${dut1_numa} -| | ... | cpu_skip=${cpu_skip} | smt_used=${False} | filename=/tmp/vnf${i}.conf -| | ... | i=${i_int} -| | ${config}= | Run keyword | Create Kubernetes VNF startup config -| | ... | node=${dut2} | cpu_cnt=${vnf_cpus} | cpu_node=${dut2_numa} -| | ... | cpu_skip=${cpu_skip} | smt_used=${False} | filename=/tmp/vnf${i}.conf -| | ... | i=${i_int} - -| L2 Cross Connect Binary Search -| | ... -| | [Arguments] | ${framesize} | ${min_rate} | ${wt} | ${rxq} | ${search_type} -| | ... -| | # Test Variables required for test execution and test teardown -| | Set Test Variable | ${framesize} -| | ${get_framesize}= | Get Frame Size | ${framesize} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} -| | Set Test Variable | ${min_rate} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | ${dut1_if1_name}= | Get interface name | ${dut1} | ${dut1_if1} -| | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2} -| | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1} -| | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2} -| | Create Kubernetes VSWITCH startup config on all DUTs | ${get_framesize} -| | ... | ${wt} | ${rxq} -| | Create Kubernetes VNF'1' startup config on all DUTs -| | Create Kubernetes VNF'2' startup config on all DUTs -| | Create Kubernetes VNF'3' startup config on all DUTs -| | Create Kubernetes VNF'4' startup config on all DUTs -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vswitch-vpp-cfg | vpp.conf=/tmp/vswitch.conf -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vnf1-vpp-cfg | vpp.conf=/tmp/vnf1.conf -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vnf2-vpp-cfg | vpp.conf=/tmp/vnf2.conf -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vnf3-vpp-cfg | vpp.conf=/tmp/vnf3.conf -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vnf4-vpp-cfg | vpp.conf=/tmp/vnf4.conf -| | Apply Kubernetes resource on node | ${dut1} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 -| | Apply Kubernetes resource on node | ${dut2} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 -| | Apply Kubernetes resource on node | ${dut1} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 -| | Apply Kubernetes resource on node | ${dut2} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 -| | Apply Kubernetes resource on node | ${dut1} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf3 -| | Apply Kubernetes resource on node | ${dut2} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf3 -| | Apply Kubernetes resource on node | ${dut1} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf4 -| | Apply Kubernetes resource on node | ${dut2} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf4 -| | Apply Kubernetes resource on node | ${dut1} -| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} -| | ... | $$VSWITCH_IF1$$=${dut1_if1_name} -| | ... | $$VSWITCH_IF2$$=${dut1_if2_name} -| | Apply Kubernetes resource on node | ${dut2} -| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} -| | ... | $$VSWITCH_IF1$$=${dut2_if1_name} -| | ... | $$VSWITCH_IF2$$=${dut2_if2_name} -| | Wait for Kubernetes PODs on all DUTs | ${nodes} | csit -| | Set Kubernetes PODs affinity on all DUTs | ${nodes} -| | Run Keyword If | '${search_type}' == 'NDR' -| | ... | Find NDR using binary search and pps -| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} -| | ... | ELSE IF | '${search_type}' == 'PDR' -| | ... | Find PDR using binary search and pps -| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} -| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} - -*** Test Cases *** -| tc01-64B-1t1c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 64B | 1C | NDRDISC -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${64} | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR - -| tc02-64B-1t1c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${64} | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR - -| tc03-IMIX-1t1c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 1C | NDRDISC -| | [Template] | L2 Cross Connect Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR - -| tc04-IMIX-1t1c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 1C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR - -| tc05-1518B-1t1c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 1518B | 1C | NDRDISC -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR - -| tc06-1518B-1t1c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR - -| tc07-64B-2t2c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 64B | 2C | NDRDISC -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${64} | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR - -| tc08-64B-2t2c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${64} | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR - -| tc09-IMIX-2t2c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 2C | NDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR - -| tc10-IMIX-2t2c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 2C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR - -| tc11-1518B-2t2c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 1518B | 2C | NDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR - -| tc12-1518B-2t2c-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr.robot b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr.robot new file mode 100644 index 0000000000..b33c5c7bdd --- /dev/null +++ b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr.robot @@ -0,0 +1,170 @@ +# Copyright (c) 2017 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | ETH | L2XCFWD | SCALE | L2XCBASE | MEMIF +| ... | K8S | 1VSWITCH | 2VNF | VPP_AGENT | SFC_CONTROLLER | CHAIN +| ... +| Suite Setup | Set up 3-node performance topology with DUT's NIC model +| ... | L2 | Intel-X710 +| ... +| Test Setup | Set up performance test with Ligato Kubernetes +| ... +| Suite Teardown | Tear down 3-node performance topology +| ... +| Test Teardown | Tear down performance test with Ligato Kubernetes +| ... +| Test Template | Local Template +| ... +| Documentation | *RFC2544: Pkt throughput L2XC test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross- +| ... | connect. DUT1 and DUT2 tested with 2p10GE NIC X710 by Intel. +| ... | VNF Containers are connected to VSWITCH container via Memif interface. +| ... | All containers are running same VPP version. Containers are deployed +| ... | with Kubernetes. Configuration is applied by vnf-agent. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop +| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage +| ... | of packets transmitted. NDR and PDR are discovered for different +| ... | Ethernet L2 frame sizes using MLRsearch library. +| ... | TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, 253 flows per flow-group) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static +| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +# X710 bandwidth limit +| ${s_limit} | ${10000000000} +# SFC profile +| ${sfc_profile} | configmaps/eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain +# Traffic profile: +| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 +# CPU settings +| ${system_cpus}= | ${1} +| ${vswitch_cpus}= | ${5} +| ${vnf_cpus}= | ${2} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs Container orchestrated config. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | ${framesize} +| | Set Test Variable | ${min_rate} | ${10000} +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo +| | ... | ${s_limit} | ${framesize} +| | ... +| | ${dut1_if1_name}= | Get interface name | ${dut1} | ${dut1_if1} +| | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2} +| | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1} +| | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2} +| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} +| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} +| | Create Kubernetes VSWITCH startup config on all DUTs +| | ... | ${phy_cores} | ${rxq} | ${jumbo} +| | Create Kubernetes VNF'1' startup config on all DUTs +| | Create Kubernetes VNF'2' startup config on all DUTs +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vswitch-vpp-cfg | vpp.conf=/tmp/vswitch.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf1-vpp-cfg | vpp.conf=/tmp/vnf1.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf2-vpp-cfg | vpp.conf=/tmp/vnf2.conf +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut1_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut1_if2_name} +| | Apply Kubernetes resource on node | ${dut2} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut2_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut2_if2_name} +| | Wait for Kubernetes PODs on all DUTs | ${nodes} | csit +| | Set Kubernetes PODs affinity on all DUTs | ${nodes} +| | Find NDR and PDR intervals using optimized search +| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} + +*** Test Cases *** +| tc01-64B-1c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | 64B | 1C +| | framesize=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | 64B | 2C +| | framesize=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | 64B | 4C +| | framesize=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} + diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrpdrdisc.robot b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrpdrdisc.robot deleted file mode 100644 index d88b4b9a87..0000000000 --- a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrpdrdisc.robot +++ /dev/null @@ -1,310 +0,0 @@ -# Copyright (c) 2018 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC -| ... | NIC_Intel-X520-DA2 | ETH | L2XCFWD | SCALE | L2XCBASE | MEMIF -| ... | K8S | 1VSWITCH | 2VNF | VPP_AGENT | SFC_CONTROLLER | CHAIN -| ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L2 | Intel-X710 -| ... -| Test Setup | Set up performance test with Ligato Kubernetes -| ... -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Teardown | Tear down performance test with Ligato Kubernetes -| ... -| Documentation | *RFC2544: Pkt throughput L2XC test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross- -| ... | connect. DUT1 and DUT2 tested with 2p10GE NIC X710 by Intel. -| ... | VNF Containers are connected to VSWITCH container via Memif interface. -| ... | All containers are running same VPP version. Containers are deployed -| ... | with Kubernetes. Configuration is applied by vnf-agent. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage -| ... | of packets transmitted. NDR and PDR are discovered for different -| ... | Ethernet L2 frame sizes using either binary search or linear search -| ... | algorithms with configured starting rate and final step that determines -| ... | throughput measurement resolution. Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 254 flows per flow-group) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static -| ... | payload. MAC addresses are matching MAC addresses of the TG node -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -# X710 bandwidth limit -| ${s_limit} | ${10000000000} -# SFC profile -| ${sfc_profile} | configmaps/eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain -# Traffic profile: -| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 -# CPU settings -| ${system_cpus}= | ${1} -| ${vswitch_cpus}= | ${5} -| ${vnf_cpus}= | ${2} - -*** Keywords *** -| Create Kubernetes VSWITCH startup config on all DUTs -| | [Documentation] | Create base startup configuration of VSWITCH in Kubernetes -| | ... | deploy to all DUTs. -| | ... -| | ... | *Arguments:* -| | ... | - ${framesize} - L2 framesize. Type: integer -| | ... | - ${wt} - Worker threads. Type: integer -| | ... | - ${rxq} - RX queues. Type: integer -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Create Kubernetes VSWITCH startup config on all DUTs \| ${64} \ -| | ... | \| ${1} \| ${1} -| | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} -| | ${dut1_numa}= | Get interfaces numa node | ${dut1} -| | ... | ${dut1_if1} | ${dut1_if2} -| | ${dut2_numa}= | Get interfaces numa node | ${dut2} -| | ... | ${dut2_if1} | ${dut2_if2} -| | ${dut1_if1_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if1} -| | ${dut1_if2_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if2} -| | ${dut2_if1_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if1} -| | ${dut2_if2_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if2} -| | ${cpu_cnt}= | Evaluate | ${wt}+1 -| | ${config}= | Run keyword | Create Kubernetes VSWITCH startup config -| | ... | node=${dut1} | cpu_cnt=${cpu_cnt} | cpu_node=${dut1_numa} -| | ... | cpu_skip=${system_cpus} | smt_used=${False} -| | ... | filename=/tmp/vswitch.conf | framesize=${framesize} | rxq=${rxq} -| | ... | if1=${dut1_if1_pci} | if2=${dut1_if2_pci} -| | ${config}= | Run keyword | Create Kubernetes VSWITCH startup config -| | ... | node=${dut2} | cpu_cnt=${cpu_cnt} | cpu_node=${dut2_numa} -| | ... | cpu_skip=${system_cpus} | smt_used=${False} -| | ... | filename=/tmp/vswitch.conf | framesize=${framesize} | rxq=${rxq} -| | ... | if1=${dut2_if1_pci} | if2=${dut2_if2_pci} - -| Create Kubernetes VNF'${i}' startup config on all DUTs -| | [Documentation] | Create base startup configuration of VNF in Kubernetes -| | ... | deploy to all DUTs. -| | ... -| | ${i_int}= | Convert To Integer | ${i} -| | ${cpu_skip}= | Evaluate | ${vswitch_cpus}+${system_cpus} -| | ${dut1_numa}= | Get interfaces numa node | ${dut1} -| | ... | ${dut1_if1} | ${dut1_if2} -| | ${dut2_numa}= | Get interfaces numa node | ${dut2} -| | ... | ${dut2_if1} | ${dut2_if2} -| | ${config}= | Run keyword | Create Kubernetes VNF startup config -| | ... | node=${dut1} | cpu_cnt=${vnf_cpus} | cpu_node=${dut1_numa} -| | ... | cpu_skip=${cpu_skip} | smt_used=${False} | filename=/tmp/vnf${i}.conf -| | ... | i=${i_int} -| | ${config}= | Run keyword | Create Kubernetes VNF startup config -| | ... | node=${dut2} | cpu_cnt=${vnf_cpus} | cpu_node=${dut2_numa} -| | ... | cpu_skip=${cpu_skip} | smt_used=${False} | filename=/tmp/vnf${i}.conf -| | ... | i=${i_int} - -| L2 Cross Connect Binary Search -| | ... -| | [Arguments] | ${framesize} | ${min_rate} | ${wt} | ${rxq} | ${search_type} -| | ... -| | # Test Variables required for test execution and test teardown -| | Set Test Variable | ${framesize} -| | ${get_framesize}= | Get Frame Size | ${framesize} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} -| | Set Test Variable | ${min_rate} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | ${dut1_if1_name}= | Get interface name | ${dut1} | ${dut1_if1} -| | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2} -| | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1} -| | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2} -| | Create Kubernetes VSWITCH startup config on all DUTs | ${get_framesize} -| | ... | ${wt} | ${rxq} -| | Create Kubernetes VNF'1' startup config on all DUTs -| | Create Kubernetes VNF'2' startup config on all DUTs -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vswitch-vpp-cfg | vpp.conf=/tmp/vswitch.conf -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vnf1-vpp-cfg | vpp.conf=/tmp/vnf1.conf -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vnf2-vpp-cfg | vpp.conf=/tmp/vnf2.conf -| | Apply Kubernetes resource on node | ${dut1} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 -| | Apply Kubernetes resource on node | ${dut2} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 -| | Apply Kubernetes resource on node | ${dut1} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 -| | Apply Kubernetes resource on node | ${dut2} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 -| | Apply Kubernetes resource on node | ${dut1} -| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} -| | ... | $$VSWITCH_IF1$$=${dut1_if1_name} -| | ... | $$VSWITCH_IF2$$=${dut1_if2_name} -| | Apply Kubernetes resource on node | ${dut2} -| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} -| | ... | $$VSWITCH_IF1$$=${dut2_if1_name} -| | ... | $$VSWITCH_IF2$$=${dut2_if2_name} -| | Wait for Kubernetes PODs on all DUTs | ${nodes} | csit -| | Set Kubernetes PODs affinity on all DUTs | ${nodes} -| | Run Keyword If | '${search_type}' == 'NDR' -| | ... | Find NDR using binary search and pps -| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} -| | ... | ELSE IF | '${search_type}' == 'PDR' -| | ... | Find PDR using binary search and pps -| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} -| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} - -*** Test Cases *** -| tc01-64B-1t1c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 64B | 1C | NDRDISC -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${64} | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR - -| tc02-64B-1t1c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${64} | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR - -| tc03-IMIX-1t1c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 1C | NDRDISC -| | [Template] | L2 Cross Connect Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR - -| tc04-IMIX-1t1c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 1C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR - -| tc05-1518B-1t1c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 1518B | 1C | NDRDISC -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR - -| tc06-1518B-1t1c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR - -| tc07-64B-2t2c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 64B | 2C | NDRDISC -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${64} | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR - -| tc08-64B-2t2c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${64} | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR - -| tc09-IMIX-2t2c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 2C | NDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR - -| tc10-IMIX-2t2c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 2C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR - -| tc11-1518B-2t2c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 1518B | 2C | NDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR - -| tc12-1518B-2t2c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr.robot b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr.robot new file mode 100644 index 0000000000..9ebb772d45 --- /dev/null +++ b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr.robot @@ -0,0 +1,184 @@ +# Copyright (c) 2017 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | ETH | L2XCFWD | SCALE | L2XCBASE | MEMIF +| ... | K8S | 1VSWITCH | 4VNF | VPP_AGENT | SFC_CONTROLLER | CHAIN +| ... +| Suite Setup | Set up 3-node performance topology with DUT's NIC model +| ... | L2 | Intel-X710 +| ... +| Test Setup | Set up performance test with Ligato Kubernetes +| ... +| Suite Teardown | Tear down 3-node performance topology +| ... +| Test Teardown | Tear down performance test with Ligato Kubernetes +| ... +| Test Template | Local Template +| ... +| Documentation | *RFC2544: Pkt throughput L2XC test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross- +| ... | connect. DUT1 and DUT2 tested with 2p10GE NIC X710 by Intel. +| ... | VNF Containers are connected to VSWITCH container via Memif interface. +| ... | All containers are running same VPP version. Containers are deployed +| ... | with Kubernetes. Configuration is applied by vnf-agent. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop +| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage +| ... | of packets transmitted. NDR and PDR are discovered for different +| ... | Ethernet L2 frame sizes using MLRsearch library. +| ... | TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, 253 flows per flow-group) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static +| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +# X710 bandwidth limit +| ${s_limit} | ${10000000000} +# SFC profile +| ${sfc_profile} | configmaps/eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain +# Traffic profile: +| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 +# CPU settings +| ${system_cpus}= | ${1} +| ${vswitch_cpus}= | ${5} +| ${vnf_cpus}= | ${2} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs Container orchestrated config. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | ${framesize} +| | Set Test Variable | ${min_rate} | ${10000} +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo +| | ... | ${s_limit} | ${framesize} +| | ... +| | ${dut1_if1_name}= | Get interface name | ${dut1} | ${dut1_if1} +| | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2} +| | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1} +| | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2} +| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} +| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} +| | Create Kubernetes VSWITCH startup config on all DUTs +| | ... | ${phy_cores} | ${rxq} | ${jumbo} +| | Create Kubernetes VNF'1' startup config on all DUTs +| | Create Kubernetes VNF'2' startup config on all DUTs +| | Create Kubernetes VNF'3' startup config on all DUTs +| | Create Kubernetes VNF'4' startup config on all DUTs +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vswitch-vpp-cfg | vpp.conf=/tmp/vswitch.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf1-vpp-cfg | vpp.conf=/tmp/vnf1.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf2-vpp-cfg | vpp.conf=/tmp/vnf2.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf3-vpp-cfg | vpp.conf=/tmp/vnf3.conf +| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit +| | ... | name=vnf4-vpp-cfg | vpp.conf=/tmp/vnf4.conf +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf3 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf3 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf4 +| | Apply Kubernetes resource on node | ${dut2} +| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf4 +| | Apply Kubernetes resource on node | ${dut1} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut1_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut1_if2_name} +| | Apply Kubernetes resource on node | ${dut2} +| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} +| | ... | $$VSWITCH_IF1$$=${dut2_if1_name} +| | ... | $$VSWITCH_IF2$$=${dut2_if2_name} +| | Wait for Kubernetes PODs on all DUTs | ${nodes} | csit +| | Set Kubernetes PODs affinity on all DUTs | ${nodes} +| | Find NDR and PDR intervals using optimized search +| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} + +*** Test Cases *** +| tc01-64B-1c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | 64B | 1C +| | framesize=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | 64B | 2C +| | framesize=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | 64B | 4C +| | framesize=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} + diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-ndrpdrdisc.robot b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-ndrpdrdisc.robot deleted file mode 100644 index 35e342094c..0000000000 --- a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-ndrpdrdisc.robot +++ /dev/null @@ -1,324 +0,0 @@ -# Copyright (c) 2018 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC -| ... | NIC_Intel-X710 | ETH | L2XCFWD | SCALE | L2XCBASE | MEMIF -| ... | K8S | 1VSWITCH | 4VNF | VPP_AGENT | SFC_CONTROLLER | CHAIN -| ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L2 | Intel-X710 -| ... -| Test Setup | Set up performance test with Ligato Kubernetes -| ... -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Teardown | Tear down performance test with Ligato Kubernetes -| ... -| Documentation | *RFC2544: Pkt throughput L2XC test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross- -| ... | connect. DUT1 and DUT2 tested with 2p10GE NIC X710 by Intel. -| ... | VNF Containers are connected to VSWITCH container via Memif interface. -| ... | All containers are running same VPP version. Containers are deployed -| ... | with Kubernetes. Configuration is applied by vnf-agent. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage -| ... | of packets transmitted. NDR and PDR are discovered for different -| ... | Ethernet L2 frame sizes using either binary search or linear search -| ... | algorithms with configured starting rate and final step that determines -| ... | throughput measurement resolution. Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 254 flows per flow-group) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static -| ... | payload. MAC addresses are matching MAC addresses of the TG node -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -# X710 bandwidth limit -| ${s_limit} | ${10000000000} -# SFC profile -| ${sfc_profile} | configmaps/eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain -# Traffic profile: -| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 -# CPU settings -| ${system_cpus}= | ${1} -| ${vswitch_cpus}= | ${5} -| ${vnf_cpus}= | ${2} - -*** Keywords *** -| Create Kubernetes VSWITCH startup config on all DUTs -| | [Documentation] | Create base startup configuration of VSWITCH in Kubernetes -| | ... | deploy to all DUTs. -| | ... -| | ... | *Arguments:* -| | ... | - ${framesize} - L2 framesize. Type: integer -| | ... | - ${wt} - Worker threads. Type: integer -| | ... | - ${rxq} - RX queues. Type: integer -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Create Kubernetes VSWITCH startup config on all DUTs \| ${64} \ -| | ... | \| ${1} \| ${1} -| | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} -| | ${dut1_numa}= | Get interfaces numa node | ${dut1} -| | ... | ${dut1_if1} | ${dut1_if2} -| | ${dut2_numa}= | Get interfaces numa node | ${dut2} -| | ... | ${dut2_if1} | ${dut2_if2} -| | ${dut1_if1_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if1} -| | ${dut1_if2_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if2} -| | ${dut2_if1_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if1} -| | ${dut2_if2_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if2} -| | ${cpu_cnt}= | Evaluate | ${wt}+1 -| | ${config}= | Run keyword | Create Kubernetes VSWITCH startup config -| | ... | node=${dut1} | cpu_cnt=${cpu_cnt} | cpu_node=${dut1_numa} -| | ... | cpu_skip=${system_cpus} | smt_used=${False} -| | ... | filename=/tmp/vswitch.conf | framesize=${framesize} | rxq=${rxq} -| | ... | if1=${dut1_if1_pci} | if2=${dut1_if2_pci} -| | ${config}= | Run keyword | Create Kubernetes VSWITCH startup config -| | ... | node=${dut2} | cpu_cnt=${cpu_cnt} | cpu_node=${dut2_numa} -| | ... | cpu_skip=${system_cpus} | smt_used=${False} -| | ... | filename=/tmp/vswitch.conf | framesize=${framesize} | rxq=${rxq} -| | ... | if1=${dut2_if1_pci} | if2=${dut2_if2_pci} - -| Create Kubernetes VNF'${i}' startup config on all DUTs -| | [Documentation] | Create base startup configuration of VNF in Kubernetes -| | ... | deploy to all DUTs. -| | ... -| | ${i_int}= | Convert To Integer | ${i} -| | ${cpu_skip}= | Evaluate | ${vswitch_cpus}+${system_cpus} -| | ${dut1_numa}= | Get interfaces numa node | ${dut1} -| | ... | ${dut1_if1} | ${dut1_if2} -| | ${dut2_numa}= | Get interfaces numa node | ${dut2} -| | ... | ${dut2_if1} | ${dut2_if2} -| | ${config}= | Run keyword | Create Kubernetes VNF startup config -| | ... | node=${dut1} | cpu_cnt=${vnf_cpus} | cpu_node=${dut1_numa} -| | ... | cpu_skip=${cpu_skip} | smt_used=${False} | filename=/tmp/vnf${i}.conf -| | ... | i=${i_int} -| | ${config}= | Run keyword | Create Kubernetes VNF startup config -| | ... | node=${dut2} | cpu_cnt=${vnf_cpus} | cpu_node=${dut2_numa} -| | ... | cpu_skip=${cpu_skip} | smt_used=${False} | filename=/tmp/vnf${i}.conf -| | ... | i=${i_int} - -| L2 Cross Connect Binary Search -| | ... -| | [Arguments] | ${framesize} | ${min_rate} | ${wt} | ${rxq} | ${search_type} -| | ... -| | # Test Variables required for test execution and test teardown -| | Set Test Variable | ${framesize} -| | ${get_framesize}= | Get Frame Size | ${framesize} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} -| | Set Test Variable | ${min_rate} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | ${dut1_if1_name}= | Get interface name | ${dut1} | ${dut1_if1} -| | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2} -| | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1} -| | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2} -| | Create Kubernetes VSWITCH startup config on all DUTs | ${get_framesize} -| | ... | ${wt} | ${rxq} -| | Create Kubernetes VNF'1' startup config on all DUTs -| | Create Kubernetes VNF'2' startup config on all DUTs -| | Create Kubernetes VNF'3' startup config on all DUTs -| | Create Kubernetes VNF'4' startup config on all DUTs -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vswitch-vpp-cfg | vpp.conf=/tmp/vswitch.conf -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vnf1-vpp-cfg | vpp.conf=/tmp/vnf1.conf -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vnf2-vpp-cfg | vpp.conf=/tmp/vnf2.conf -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vnf3-vpp-cfg | vpp.conf=/tmp/vnf3.conf -| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit -| | ... | name=vnf4-vpp-cfg | vpp.conf=/tmp/vnf4.conf -| | Apply Kubernetes resource on node | ${dut1} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 -| | Apply Kubernetes resource on node | ${dut2} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1 -| | Apply Kubernetes resource on node | ${dut1} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 -| | Apply Kubernetes resource on node | ${dut2} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2 -| | Apply Kubernetes resource on node | ${dut1} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf3 -| | Apply Kubernetes resource on node | ${dut2} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf3 -| | Apply Kubernetes resource on node | ${dut1} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf4 -| | Apply Kubernetes resource on node | ${dut2} -| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf4 -| | Apply Kubernetes resource on node | ${dut1} -| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} -| | ... | $$VSWITCH_IF1$$=${dut1_if1_name} -| | ... | $$VSWITCH_IF2$$=${dut1_if2_name} -| | Apply Kubernetes resource on node | ${dut2} -| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME} -| | ... | $$VSWITCH_IF1$$=${dut2_if1_name} -| | ... | $$VSWITCH_IF2$$=${dut2_if2_name} -| | Wait for Kubernetes PODs on all DUTs | ${nodes} | csit -| | Set Kubernetes PODs affinity on all DUTs | ${nodes} -| | Run Keyword If | '${search_type}' == 'NDR' -| | ... | Find NDR using binary search and pps -| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} -| | ... | ELSE IF | '${search_type}' == 'PDR' -| | ... | Find PDR using binary search and pps -| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} -| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} - -*** Test Cases *** -| tc01-64B-1t1c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 64B | 1C | NDRDISC -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${64} | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR - -| tc02-64B-1t1c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${64} | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR - -| tc03-IMIX-1t1c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 1C | NDRDISC -| | [Template] | L2 Cross Connect Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR - -| tc04-IMIX-1t1c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 1C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR - -| tc05-1518B-1t1c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 1518B | 1C | NDRDISC -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR - -| tc06-1518B-1t1c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR - -| tc07-64B-2t2c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 64B | 2C | NDRDISC -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${64} | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR - -| tc08-64B-2t2c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${64} | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR - -| tc09-IMIX-2t2c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 2C | NDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR - -| tc10-IMIX-2t2c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 2C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR - -| tc11-1518B-2t2c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... -| | [Tags] | 1518B | 2C | NDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR - -| tc12-1518B-2t2c-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... -| | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR |