diff options
Diffstat (limited to 'tests/ligato/perf/l2/10ge2p1x520-eth-l2xcbase-eth-2memif-1vnf-ndrpdrdisc.robot')
| -rw-r--r-- | tests/ligato/perf/l2/10ge2p1x520-eth-l2xcbase-eth-2memif-1vnf-ndrpdrdisc.robot | 303 |
1 files changed, 0 insertions, 303 deletions
diff --git a/tests/ligato/perf/l2/10ge2p1x520-eth-l2xcbase-eth-2memif-1vnf-ndrpdrdisc.robot b/tests/ligato/perf/l2/10ge2p1x520-eth-l2xcbase-eth-2memif-1vnf-ndrpdrdisc.robot deleted file mode 100644 index a21a1bfb88..0000000000 --- a/tests/ligato/perf/l2/10ge2p1x520-eth-l2xcbase-eth-2memif-1vnf-ndrpdrdisc.robot +++ /dev/null @@ -1,303 +0,0 @@ -# Copyright (c) 2017 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC -| ... | NIC_Intel-X520-DA2 | ETH | L2XCFWD | BASE | L2XCBASE | MEMIF -| ... | KUBERNETES | 1VSWITCH | 1VNF | VPP_AGENT | SFC_CONTROLLER -| ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L2 | Intel-X520-DA2 -| ... -| Test Setup | Run Keywords -| ... | Apply Kubernetes resource on all duts | ${nodes} | kafka.yaml -| ... | AND | Apply Kubernetes resource on all duts | ${nodes} | etcd.yaml -| ... -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Teardown | Run Keywords -| ... | Get Kubernetes logs on all DUTs | ${nodes} | AND -| ... | Describe Kubernetes resource on all DUTs | ${nodes} | AND -| ... | Delete Kubernetes resource on all duts | ${nodes} -| ... -| Documentation | *RFC2544: Pkt throughput L2XC test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross- -| ... | connect. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel. -| ... | VNF Container is connected to VSWITCH container via Memif interface. All -| ... | containers is running same VPP version. Containers are deployed with -| ... | Kubernetes. Configuration is applied by vnf-agent. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage -| ... | of packets transmitted. NDR and PDR are discovered for different -| ... | Ethernet L2 frame sizes using either binary search or linear search -| ... | algorithms with configured starting rate and final step that determines -| ... | throughput measurement resolution. Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 253 flows per flow-group) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static -| ... | payload. MAC addresses are matching MAC addresses of the TG node -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -| ${avg_imix_framesize}= | ${357.833} -# X520-DA2 bandwidth limit -| ${s_limit} | ${10000000000} -# Kubernetes profile -| ${kubernetes_profile} | eth-l2xcbase-eth-2memif-1vnf -# Traffic profile: -| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 -# CPU settings -| ${system_cpus}= | ${1} -| ${vswitch_cpus}= | ${5} -| ${vnf_cpus}= | ${3} - -*** Keywords *** -| Create Kubernetes VSWITCH startup config on all DUTs -| | [Documentation] | Create base startup configuration of VSWITCH in Kubernetes -| | ... | deploy to all DUTs. -| | ... -| | ... | *Arguments:* -| | ... | - ${framesize} - L2 framesize. Type: integer -| | ... | - ${wt} - Worker threads. Type: integer -| | ... | - ${rxq} - RX queues. Type: integer -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Create Kubernetes VSWITCH startup config on all DUTs \| ${64} \ -| | ... | \| ${1} \| ${1} -| | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} -| | ${dut1_numa}= | Get interfaces numa node | ${dut1} -| | ... | ${dut1_if1} | ${dut1_if2} -| | ${dut2_numa}= | Get interfaces numa node | ${dut2} -| | ... | ${dut2_if1} | ${dut2_if2} -| | ${dut1_if1_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if1} -| | ${dut1_if2_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if2} -| | ${dut2_if1_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if1} -| | ${dut2_if2_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if2} -| | ${cpu_cnt}= | Evaluate | ${wt}+1 -| | ${config}= | Run keyword | Create Kubernetes VSWITCH startup config -| | ... | node=${dut1} | cpu_cnt=${cpu_cnt} | cpu_node=${dut1_numa} -| | ... | cpu_skip=${system_cpus} | smt_used=${False} -| | ... | filename=/tmp/vswitch.conf | framesize=${framesize} | rxq=${rxq} -| | ... | if1=${dut1_if1_pci} | if2=${dut1_if2_pci} -| | ${config}= | Run keyword | Create Kubernetes VSWITCH startup config -| | ... | node=${dut2} | cpu_cnt=${cpu_cnt} | cpu_node=${dut2_numa} -| | ... | cpu_skip=${system_cpus} | smt_used=${False} -| | ... | filename=/tmp/vswitch.conf | framesize=${framesize} | rxq=${rxq} -| | ... | if1=${dut2_if1_pci} | if2=${dut2_if2_pci} - -| Create Kubernetes VNF'${i}' startup config on all DUTs -| | [Documentation] | Create base startup configuration of VNF in Kubernetes -| | ... | deploy to all DUTs. -| | ... -| | ${i_int}= | Convert To Integer | ${i} -| | ${cpu_skip}= | Evaluate | ${vswitch_cpus}+${system_cpus} -| | ${dut1_numa}= | Get interfaces numa node | ${dut1} -| | ... | ${dut1_if1} | ${dut1_if2} -| | ${dut2_numa}= | Get interfaces numa node | ${dut2} -| | ... | ${dut2_if1} | ${dut2_if2} -| | ${config}= | Run keyword | Create Kubernetes VNF startup config -| | ... | node=${dut1} | cpu_cnt=${vnf_cpus} | cpu_node=${dut1_numa} -| | ... | cpu_skip=${cpu_skip} | smt_used=${False} | filename=/tmp/vnf${i}.conf -| | ... | i=${i_int} -| | ${config}= | Run keyword | Create Kubernetes VNF startup config -| | ... | node=${dut2} | cpu_cnt=${vnf_cpus} | cpu_node=${dut2_numa} -| | ... | cpu_skip=${cpu_skip} | smt_used=${False} | filename=/tmp/vnf${i}.conf -| | ... | i=${i_int} - -| L2 Cross Connect Binary Search -| | [Arguments] | ${framesize} | ${min_rate} | ${wt} | ${rxq} | ${search_type} -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${min_rate} -| | ${get_framesize}= | Set Variable If -| | ... | "${framesize}" == "IMIX_v4_1" | ${avg_imix_framesize} | ${framesize} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | ${dut1_if1_name}= | Get interface name | ${dut1} | ${dut1_if1} -| | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2} -| | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1} -| | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2} -| | Create Kubernetes VSWITCH startup config on all DUTs | ${get_framesize} -| | ... | ${wt} | ${rxq} -| | Create Kubernetes VNF'1' startup config on all DUTs -| | Create Kubernetes CM from file on all DUTs | ${nodes} | name=vswitch-vpp-cfg -| | ... | key=vpp.conf | src_file=/tmp/vswitch.conf -| | Create Kubernetes CM from file on all DUTs | ${nodes} | name=vnf-vpp-cfg -| | ... | key=vpp.conf | src_file=/tmp/vnf1.conf -| | Apply Kubernetes resource on node | ${dut1} -| | ... | ${kubernetes_profile}.yaml | $$TEST_NAME$$=${TEST NAME} -| | ... | $$VSWITCH_IF1$$=${dut1_if1_name} -| | ... | $$VSWITCH_IF2$$=${dut1_if2_name} -| | Apply Kubernetes resource on node | ${dut2} -| | ... | ${kubernetes_profile}.yaml | $$TEST_NAME$$=${TEST NAME} -| | ... | $$VSWITCH_IF1$$=${dut2_if1_name} -| | ... | $$VSWITCH_IF2$$=${dut2_if2_name} -| | Wait for Kubernetes PODs on all DUTs | ${nodes} -| | Describe Kubernetes resource on all DUTs | ${nodes} -| | Run Keyword If | '${search_type}' == 'NDR' -| | ... | Find NDR using binary search and pps -| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} -| | ... | ELSE IF | '${search_type}' == 'PDR' -| | ... | Find PDR using binary search and pps -| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} -| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} - -*** Test Cases *** -| tc01-64B-1t1c-eth-l2xcbase-eth-2memif-1vnf-kubernetes-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 100kpps. -| | ... -| | [Tags] | 64B | 1T1C | STHREAD | NDRDISC -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${64} | min_rate=${100000} | wt=1 | rxq=1 | search_type=NDR - -| tc02-64B-1t1c-eth-l2xcbase-eth-2memif-1vnf-kubernetes-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 100kpps, LT=0.5%. -| | ... -| | [Tags] | 64B | 1T1C | STHREAD | PDRDISC -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${64} | min_rate=${100000} | wt=1 | rxq=1 | search_type=PDR - -| tc03-IMIX-1t1c-eth-l2xcbase-eth-2memif-1vnf-kubernetes-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 1T1C | STHREAD | NDRDISC -| | [Template] | L2 Cross Connect Binary Search -| | framesize=IMIX_v4_1 | min_rate=${10000} | wt=1 | rxq=1 | search_type=NDR - -| tc04-IMIX-1t1c-eth-l2xcbase-eth-2memif-1vnf-kubernetes-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 1T1C | STHREAD | PDRDISC -| | [Template] | L2 Cross Connect Binary Search -| | framesize=IMIX_v4_1 | min_rate=${10000} | wt=1 | rxq=1 | search_type=PDR - -| tc05-1518B-1t1c-eth-l2xcbase-eth-2memif-1vnf-kubernetes-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... -| | [Tags] | 1518B | 1T1C | STHREAD | NDRDISC -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${1518} | min_rate=${10000} | wt=1 | rxq=1 | search_type=NDR - -| tc06-1518B-1t1c-eth-l2xcbase-eth-2memif-1vnf-kubernetes-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... -| | [Tags] | 1518B | 1T1C | STHREAD | PDRDISC -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${1518} | min_rate=${10000} | wt=1 | rxq=1 | search_type=PDR - -| tc07-64B-2t2c-eth-l2xcbase-eth-2memif-1vnf-kubernetes-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 thread, 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 100kpps. -| | ... -| | [Tags] | 64B | 2T2C | MTHREAD | NDRDISC -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${64} | min_rate=${100000} | wt=2 | rxq=1 | search_type=NDR - -| tc08-64B-2t2c-eth-l2xcbase-eth-2memif-1vnf-kubernetes-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 thread, 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 100kpps, LT=0.5%. -| | ... -| | [Tags] | 64B | 2T2C | MTHREAD | PDRDISC -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${64} | min_rate=${100000} | wt=2 | rxq=1 | search_type=PDR - -| tc09-IMIX-2t2c-eth-l2xcbase-eth-2memif-1vnf-kubernetes-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 thread, 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 2T2C | MTHREAD | NDRDISC -| | [Template] | L2 Cross Connect Binary Search -| | framesize=IMIX_v4_1 | min_rate=${10000} | wt=2 | rxq=1 | search_type=NDR - -| tc10-IMIX-2t2c-eth-l2xcbase-eth-2memif-1vnf-kubernetes-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 thread, 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... -| | [Tags] | IMIX | 2T2C | MTHREAD | PDRDISC -| | [Template] | L2 Cross Connect Binary Search -| | framesize=IMIX_v4_1 | min_rate=${10000} | wt=2 | rxq=1 | search_type=PDR - -| tc11-1518B-2t2c-eth-l2xcbase-eth-2memif-1vnf-kubernetes-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 thread, 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... -| | [Tags] | 1518B | 2T2C | MTHREAD | NDRDISC -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${1518} | min_rate=${10000} | wt=2 | rxq=1 | search_type=NDR - -| tc12-1518B-2t2c-eth-l2xcbase-eth-2memif-1vnf-kubernetes-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 thread, 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... -| | [Tags] | 1518B | 2T2C | MTHREAD | PDRDISC -| | [Template] | L2 Cross Connect Binary Search -| | framesize=${1518} | min_rate=${10000} | wt=2 | rxq=1 | search_type=PDR |