9 files changed, 502 insertions, 0 deletions
diff --git a/tests/nsh_sfc/func/__init__.robot b/tests/nsh_sfc/func/__init__.robot
new file mode 100644
index 0000000000..707244ccb4
--- /dev/null
+++ b/tests/nsh_sfc/func/__init__.robot
@@ -0,0 +1,20 @@
+# Copyright (c) 2017 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| Resource | resources/libraries/robot/shared/interfaces.robot
+| Library | resources.libraries.python.SFC.SetupSFCTest
+| Suite Setup | Run Keywords | Setup NSH SFC test | ${nodes}
+| ...         | AND          | Setup All DUTs | ${nodes}
+| ...         | AND          | Update All Interface Data On All Nodes | ${nodes}
diff --git a/tests/nsh_sfc/func/proxy/eth2p-ethip4-nsh-proxy-inbound-func.robot b/tests/nsh_sfc/func/proxy/eth2p-ethip4-nsh-proxy-inbound-func.robot
new file mode 100644
index 0000000000..a85b539a83
--- /dev/null
+++ b/tests/nsh_sfc/func/proxy/eth2p-ethip4-nsh-proxy-inbound-func.robot
@@ -0,0 +1,85 @@
+# Copyright (c) 2017 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Library | resources.libraries.python.NodePath
+| Library | resources.libraries.python.Trace
+| Resource | resources/libraries/robot/shared/default.robot
+| Resource | resources/libraries/robot/nsh_sfc/default.robot
+| Resource | resources/libraries/robot/shared/interfaces.robot
+| Resource | resources/libraries/robot/ip/ip4.robot
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | FUNCTEST
+| Suite Setup | Run Keywords
+| ... | Configure all DUTs before test | AND
+| ... | Configure all TGs for traffic script | AND
+| ... | Update All Interface Data On All Nodes | ${nodes} | AND
+| ... | Setup DUT nodes for 'Proxy Inbound' functional testing
+| Test Setup | Run Keywords | Save VPP PIDs | AND
+| ... | Reset VAT History On All DUTs | ${nodes} | AND
+| ... | Clear interface counters on all vpp nodes in topology | ${nodes}
+| Test Teardown | Run Keywords
+| ... | Show packet trace on all DUTs | ${nodes} | AND
+| ... | Show VAT History On All DUTs | ${nodes} | AND
+| ... | Verify VPP PID in Teardown
+| Documentation | *NSH SFC Proxy Inbound test cases*
+| ...
+| ... | Test the SFC Proxy Inbound functional. DUT run the VPP with NSH
+| ... | SFC Plugin, TG send a VxLAN-GPE+NSH packet to the DUT,
+| ... | if the packet match the SFC Proxy inbound rules, the SFC Proxy will
+| ... | pop the VxLAN-GPE and NSH protocol, then encapsulate with the
+| ... | VxLAN protocol. DUT will loopback the packet to the TG.
+| ... | The TG will capture this VxLAN packet and check the packet
+| ... | field is correct.
+
+*** Test Cases ***
+| TC01: NSH SFC Proxy Inbound functional test with 152B frame size
+| | [Documentation]
+| | ... | Make TG send 152 Bytes VxLAN-GPE+NSH packet to DUT ingress interface.\
+| | ... | Make TG verify SFC Proxy Inbound functional is correct.
+| | ${frame_size}= | Set Variable | ${152}
+| | Node "${src_node}" interface "${src_port}" send "${frame_size}" Bytes packet to node "${dst_node}" interface "${dst_port}" for "Proxy Inbound" test
+
+| TC02: NSH SFC Proxy Inbound functional test with 256B frame size
+| | [Documentation]
+| | ... | Make TG send 256 Bytes VxLAN-GPE+NSH packet to DUT ingress interface.\
+| | ... | Make TG verify SFC Proxy Inbound functional is correct.
+| | ${frame_size}= | Set Variable | ${256}
+| | Node "${src_node}" interface "${src_port}" send "${frame_size}" Bytes packet to node "${dst_node}" interface "${dst_port}" for "Proxy Inbound" test
+
+| TC03: NSH SFC Proxy Inbound functional test with 512B frame size
+| | [Documentation]
+| | ... | Make TG send 512 Bytes VxLAN-GPE+NSH packet to DUT ingress interface.\
+| | ... | Make TG verify SFC Proxy Inbound functional is correct.
+| | ${frame_size}= | Set Variable | ${512}
+| | Node "${src_node}" interface "${src_port}" send "${frame_size}" Bytes packet to node "${dst_node}" interface "${dst_port}" for "Proxy Inbound" test
+
+| TC04: NSH SFC Proxy Inbound functional test with 1024B frame size
+| | [Documentation]
+| | ... | Make TG send 1024 Bytes VxLAN-GPE+NSH packet to DUT ingress interface.\
+| | ... | Make TG verify SFC Proxy Inbound functional is correct.
+| | ${frame_size}= | Set Variable | ${1024}
+| | Node "${src_node}" interface "${src_port}" send "${frame_size}" Bytes packet to node "${dst_node}" interface "${dst_port}" for "Proxy Inbound" test
+
+| TC05: NSH SFC Proxy Inbound functional test with 1280B frame size
+| | [Documentation]
+| | ... | Make TG send 1280 Bytes VxLAN-GPE+NSH packet to DUT ingress interface.\
+| | ... | Make TG verify SFC Proxy Inbound functional is correct.
+| | ${frame_size}= | Set Variable | ${1280}
+| | Node "${src_node}" interface "${src_port}" send "${frame_size}" Bytes packet to node "${dst_node}" interface "${dst_port}" for "Proxy Inbound" test
+
+| TC06: NSH SFC Proxy Inbound functional test with 1518B frame size
+| | [Documentation]
+| | ... | Make TG send 1518 Bytes VxLAN-GPE+NSH packet to DUT ingress interface.\
+| | ... | Make TG verify SFC Proxy Inbound functional is correct.
+| | ${frame_size}= | Set Variable | ${1518}
+| | Node "${src_node}" interface "${src_port}" send "${frame_size}" Bytes packet to node "${dst_node}" interface "${dst_port}" for "Proxy Inbound" test
diff --git a/tests/nsh_sfc/func/proxy/eth2p-ethip4-nsh-proxy-outbound-func.robot b/tests/nsh_sfc/func/proxy/eth2p-ethip4-nsh-proxy-outbound-func.robot
new file mode 100644
index 0000000000..005272b1f9
--- /dev/null
+++ b/tests/nsh_sfc/func/proxy/eth2p-ethip4-nsh-proxy-outbound-func.robot
@@ -0,0 +1,86 @@
+# Copyright (c) 2017 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Library | resources.libraries.python.NodePath
+| Library | resources.libraries.python.Trace
+| Resource | resources/libraries/robot/shared/default.robot
+| Resource | resources/libraries/robot/nsh_sfc/default.robot
+| Resource | resources/libraries/robot/shared/interfaces.robot
+| Resource | resources/libraries/robot/ip/ip4.robot
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | FUNCTEST
+| Suite Setup | Run Keywords
+| ... | Configure all DUTs before test | AND
+| ... | Configure all TGs for traffic script | AND
+| ... | Update All Interface Data On All Nodes | ${nodes} | AND
+| ... | Setup DUT nodes for 'Proxy Outbound' functional testing
+| Test Setup | Run Keywords | Save VPP PIDs | AND
+| ... | Reset VAT History On All DUTs | ${nodes} | AND
+| ... | Clear interface counters on all vpp nodes in topology | ${nodes}
+| Test Teardown | Run Keywords
+| ... | Show packet trace on all DUTs | ${nodes} | AND
+| ... | Show VAT History On All DUTs | ${nodes} | AND
+| ... | Verify VPP PID in Teardown
+| Documentation | *NSH SFC Proxy Outbound test cases*
+| ...
+| ... | Test the SFC Proxy Outbound functional. DUT run the VPP with NSH
+| ... | SFC Plugin, TG send a VxLAN packet to the DUT,
+| ... | if the packet match the SFC Proxy outbound rules, the SFC Proxy will
+| ... | push the NSH protocol, then encapsulate with the VxLAN-GPE protocol.
+| ... | DUT will loopback the packet to the TG.
+| ... | The TG will capture this VxLAN-GPE+NSH packet and check the packet
+| ... | field is correct.
+
+
+*** Test Cases ***
+| TC01: NSH SFC Proxy Outbound functional test with 128B frame size
+| | [Documentation]
+| | ... | Make TG send 128 Bytes VxLAN packet to DUT ingress interface.\
+| | ... | Make TG verify SFC Proxy Outbound functional is correct.
+| | ${frame_size}= | Set Variable | ${128}
+| | Node "${src_node}" interface "${src_port}" send "${frame_size}" Bytes packet to node "${dst_node}" interface "${dst_port}" for "Proxy Outbound" test
+
+| TC02: NSH SFC Proxy Outbound functional test with 256B frame size
+| | [Documentation]
+| | ... | Make TG send 256 Bytes VxLAN packet to DUT ingress interface.\
+| | ... | Make TG verify SFC Proxy Outbound functional is correct.
+| | ${frame_size}= | Set Variable | ${256}
+| | Node "${src_node}" interface "${src_port}" send "${frame_size}" Bytes packet to node "${dst_node}" interface "${dst_port}" for "Proxy Outbound" test
+
+| TC03: NSH SFC Proxy Outbound functional test with 512B frame size
+| | [Documentation]
+| | ... | Make TG send 512 Bytes VxLAN packet to DUT ingress interface.\
+| | ... | Make TG verify SFC Proxy Outbound functional is correct.
+| | ${frame_size}= | Set Variable | ${512}
+| | Node "${src_node}" interface "${src_port}" send "${frame_size}" Bytes packet to node "${dst_node}" interface "${dst_port}" for "Proxy Outbound" test
+
+| TC04: NSH SFC Proxy Outbound functional test with 1024B frame size
+| | [Documentation]
+| | ... | Make TG send 1024 Bytes VxLAN packet to DUT ingress interface.\
+| | ... | Make TG verify SFC Proxy Outbound functional is correct.
+| | ${frame_size}= | Set Variable | ${1024}
+| | Node "${src_node}" interface "${src_port}" send "${frame_size}" Bytes packet to node "${dst_node}" interface "${dst_port}" for "Proxy Outbound" test
+
+| TC05: NSH SFC Proxy Outbound functional test with 1280B frame size
+| | [Documentation]
+| | ... | Make TG send 1280 Bytes VxLAN packet to DUT ingress interface.\
+| | ... | Make TG verify SFC Proxy Outbound functional is correct.
+| | ${frame_size}= | Set Variable | ${1280}
+| | Node "${src_node}" interface "${src_port}" send "${frame_size}" Bytes packet to node "${dst_node}" interface "${dst_port}" for "Proxy Outbound" test
+
+| TC06: NSH SFC Proxy Outbound functional test with 1518B frame size
+| | [Documentation]
+| | ... | Make TG send 1518 Bytes VxLAN packet to DUT ingress interface.\
+| | ... | Make TG verify SFC Proxy Outbound functional is correct.
+| | ${frame_size}= | Set Variable | ${1518}
+| | Node "${src_node}" interface "${src_port}" send "${frame_size}" Bytes packet to node "${dst_node}" interface "${dst_port}" for "Proxy Outbound" test
diff --git a/tests/nsh_sfc/func/sff/eth2p-ethip4-sfc-sff-func.robot b/tests/nsh_sfc/func/sff/eth2p-ethip4-sfc-sff-func.robot
new file mode 100644
index 0000000000..1356c8c2da
--- /dev/null
+++ b/tests/nsh_sfc/func/sff/eth2p-ethip4-sfc-sff-func.robot
@@ -0,0 +1,85 @@
+# Copyright (c) 2017 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Library | resources.libraries.python.NodePath
+| Library | resources.libraries.python.Trace
+| Resource | resources/libraries/robot/shared/default.robot
+| Resource | resources/libraries/robot/nsh_sfc/default.robot
+| Resource | resources/libraries/robot/shared/interfaces.robot
+| Resource | resources/libraries/robot/ip/ip4.robot
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | FUNCTEST
+| Suite Setup | Run Keywords
+| ... | Configure all DUTs before test | AND
+| ... | Configure all TGs for traffic script | AND
+| ... | Update All Interface Data On All Nodes | ${nodes} | AND
+| ... | Setup DUT nodes for 'SFF' functional testing
+| Test Setup | Run Keywords | Save VPP PIDs | AND
+| ... | Reset VAT History On All DUTs | ${nodes} | AND
+| ... | Clear interface counters on all vpp nodes in topology | ${nodes}
+| Test Teardown | Run Keywords
+| ... | Show packet trace on all DUTs | ${nodes} | AND
+| ... | Show VAT History On All DUTs | ${nodes} | AND
+| ... | Verify VPP PID in Teardown
+| Documentation | *NSH SFC SFF test cases*
+| ...
+| ... | Test the SFC Service Function Forward functional. DUT run the VPP
+| ... | with NSH SFC Plugin, TG send a VxLAN-GPE+NSH packet to the DUT,
+| ... | if the packet match the SFC SFF rules, the SFC SFF will
+| ... | swap the VxLAN-GPE and NSH protocol.
+| ... | DUT will loopback the packet to the TG.
+| ... | The TG will capture this VxLAN-GPE+NSH packet and check the packet
+| ... | field is correct.
+
+*** Test Cases ***
+| TC01: NSH SFC SFF functional test with 152B frame size
+| | [Documentation]
+| | ... | Make TG send 152 Bytes VxLAN-GPE+NSH packet to DUT ingress interface.\
+| | ... | Make TG verify SFC SFF functional is correct.
+| | ${frame_size}= | Set Variable | ${152}
+| | Node "${src_node}" interface "${src_port}" send "${frame_size}" Bytes packet to node "${dst_node}" interface "${dst_port}" for "SFF" test
+
+| TC02: NSH SFC SFF functional test with 256B frame size
+| | [Documentation]
+| | ... | Make TG send 256 Bytes VxLAN-GPE+NSH packet to DUT ingress interface.\
+| | ... | Make TG verify SFC SFF functional is correct.
+| | ${frame_size}= | Set Variable | ${256}
+| | Node "${src_node}" interface "${src_port}" send "${frame_size}" Bytes packet to node "${dst_node}" interface "${dst_port}" for "SFF" test
+
+| TC03: NSH SFC SFF functional test with 512B frame size
+| | [Documentation]
+| | ... | Make TG send 512 Bytes VxLAN-GPE+NSH packet to DUT ingress interface.\
+| | ... | Make TG verify SFC SFF functional is correct.
+| | ${frame_size}= | Set Variable | ${512}
+| | Node "${src_node}" interface "${src_port}" send "${frame_size}" Bytes packet to node "${dst_node}" interface "${dst_port}" for "SFF" test
+
+| TC04: NSH SFC SFF functional test with 1024B frame size
+| | [Documentation]
+| | ... | Make TG send 1024 Bytes VxLAN-GPE+NSH packet to DUT ingress interface.\
+| | ... | Make TG verify SFC SFF functional is correct.
+| | ${frame_size}= | Set Variable | ${1024}
+| | Node "${src_node}" interface "${src_port}" send "${frame_size}" Bytes packet to node "${dst_node}" interface "${dst_port}" for "SFF" test
+
+| TC05: NSH SFC SFF functional test with 1280B frame size
+| | [Documentation]
+| | ... | Make TG send 1280 Bytes VxLAN-GPE+NSH packet to DUT ingress interface.\
+| | ... | Make TG verify SFC SFF functional is correct.
+| | ${frame_size}= | Set Variable | ${1280}
+| | Node "${src_node}" interface "${src_port}" send "${frame_size}" Bytes packet to node "${dst_node}" interface "${dst_port}" for "SFF" test
+
+| TC06: NSH SFC SFF functional test with 1518B frame size
+| | [Documentation]
+| | ... | Make TG send 1518 Bytes VxLAN-GPE+NSH packet to DUT ingress interface.\
+| | ... | Make TG verify SFC SFF functional is correct.
+| | ${frame_size}= | Set Variable | ${1518}
+| | Node "${src_node}" interface "${src_port}" send "${frame_size}" Bytes packet to node "${dst_node}" interface "${dst_port}" for "SFF" test
diff --git a/tests/nsh_sfc/sfc_scripts/install_sfc.sh b/tests/nsh_sfc/sfc_scripts/install_sfc.sh
new file mode 100755
index 0000000000..265d4c153a
--- /dev/null
+++ b/tests/nsh_sfc/sfc_scripts/install_sfc.sh
@@ -0,0 +1,114 @@
+#!/bin/bash
+
+set -x
+
+ROOTDIR=/tmp/openvpp-testing
+PWDDIR=$(pwd)
+
+if_name1=$1
+if_name2=$2
+
+VPP_VERSION=`cat ${ROOTDIR}/NSH_SFC_VER | grep VPP | awk -F'= ' '{print $2}'`
+NSH_SFC_VERSION=`cat ${ROOTDIR}/NSH_SFC_VER | grep NSH_SFC | awk -F'= ' '{print $2}'`
+
+VPP_CODE_DIR=${ROOTDIR}/vpp_codes
+NSH_SFC_CODE_DIR=${ROOTDIR}/nsh_sfc_codes
+
+#at first, we need to stop the vpp service if have
+sudo service vpp stop
+
+#uninstall the vpp and nsh sfc plugin
+#and git clone the vpp and nsh sfc plugin source codes
+#then compile and install them in the dut nodes.
+nsh_need_install=0
+sudo dpkg -l vpp-nsh-plugin >/dev/null 2>&1
+if [ $? -eq 0 ]; then
+    nsh_plugin_version=`dpkg -s vpp-nsh-plugin | grep Version | awk -F' ' '{print $2}'`
+    if [ "${nsh_plugin_version}" \< "${NSH_SFC_VERSION}" ]; then
+        sudo dpkg -P vpp-nsh-plugin vpp-nsh-plugin-dbg vpp-nsh-plugin-dev >/dev/null 2>&1
+        test $? -eq 0 || exit 1
+        nsh_need_install=1
+    fi
+else
+    nsh_need_install=1
+fi
+
+vpp_need_install=0
+sudo dpkg -l vpp >/dev/null 2>&1
+if [ $? -eq 0 ]; then
+    vpp_version=`dpkg -s vpp | grep Version | awk -F' ' '{print $2}'`
+    if [ "${vpp_version}" \< "${VPP_VERSION}" ]; then
+        sudo dpkg -P vpp vpp-dbg vpp-dev vpp-dpdk-dev vpp-dpdk-dkms vpp-lib \
+                     vpp-plugins vpp-python-api >/dev/null 2>&1
+        test $? -eq 0 || exit 1
+        vpp_need_install=1
+    fi
+else
+    vpp_need_install=1
+fi
+
+sleep 5
+
+##begin to clone the vpp source code
+if [ ${vpp_need_install} -eq 1 ]; then
+    sudo rm -rf ${VPP_CODE_DIR}
+    sudo mkdir -p ${VPP_CODE_DIR}
+    cd ${VPP_CODE_DIR}
+    git clone -b v${VPP_VERSION} https://gerrit.fd.io/r/vpp
+
+    #compile the vpp code
+    cd ./vpp/build-root/
+    make distclean
+    ./bootstrap.sh
+    make V=0 PLATFORM=vpp TAG=vpp install-deb
+
+    #after that, install vpp
+    sudo dpkg -i *.deb
+    cd ${PWDDIR}
+fi
+
+##begin to clone the nsh sfc source code
+if [ ${nsh_need_install} -eq 1 ]; then
+    sudo rm -rf ${NSH_SFC_CODE_DIR}
+    sudo mkdir -p ${NSH_SFC_CODE_DIR}
+    cd ${NSH_SFC_CODE_DIR}
+    git clone -b v${NSH_SFC_VERSION} https://gerrit.fd.io/r/nsh_sfc
+
+    #compile the nsh sfc code
+    cd ./nsh_sfc/nsh-plugin/
+    sudo rm -rf build
+    sudo ./build.sh
+
+    #after that, install the nsh sfc plugin
+    cd ./packaging/
+    sudo dpkg -i *.deb
+    cd ${PWDDIR}
+fi
+
+#check and setup the hugepages
+SYS_HUGEPAGE=$(cat /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages)
+if [ ${SYS_HUGEPAGE} -lt 1024 ]; then
+    MOUNT=$(mount | grep /mnt/huge)
+    while [ "${MOUNT}" != "" ]
+    do
+        sudo umount /mnt/huge
+        sleep 1
+        MOUNT=$(mount | grep /mnt/huge)
+    done
+
+    echo 2048 | sudo tee /sys/devices/system/node/node0/hugepages/hugepages-2048kB/nr_hugepages
+    echo 2048 | sudo tee /sys/devices/system/node/node1/hugepages/hugepages-2048kB/nr_hugepages
+
+    sudo mkdir -p /mnt/huge
+    sudo mount -t hugetlbfs nodev /mnt/huge/
+    test $? -eq 0 || exit 1
+fi
+
+#check and set the max map count
+SYS_MAP=$(cat /proc/sys/vm/max_map_count)
+if [ ${SYS_MAP} -lt 200000 ]; then
+    echo 200000 | sudo tee /proc/sys/vm/max_map_count
+fi
+
+#after all, we can start the vpp service now
+sudo service vpp start
diff --git a/tests/nsh_sfc/sfc_scripts/set_nsh_proxy_inbound.sh b/tests/nsh_sfc/sfc_scripts/set_nsh_proxy_inbound.sh
new file mode 100755
index 0000000000..453de3f8de
--- /dev/null
+++ b/tests/nsh_sfc/sfc_scripts/set_nsh_proxy_inbound.sh
@@ -0,0 +1,32 @@
+#!/bin/bash
+
+set -x
+
+sudo service vpp restart
+sleep 5
+
+sudo vppctl set int state $1 up
+sleep 10
+sudo vppctl set int ip table $1 0
+sudo vppctl set int ip address $1 192.168.50.76/24
+
+sudo vppctl create vxlan-gpe tunnel local 192.168.50.76 remote 192.168.50.72 vni 9 next-nsh encap-vrf-id 0 decap-vrf-id 0
+sudo vppctl set int l2 bridge vxlan_gpe_tunnel0 1 1
+
+sudo vppctl create vxlan tunnel src 192.168.50.76 dst 192.168.50.71 vni 1 encap-vrf-id 0 decap-next node nsh-proxy
+sudo vppctl set int l2 bridge vxlan_tunnel0 1 1
+
+sudo vppctl create nsh entry nsp 185 nsi 255 md-type 1 c1 3232248395 c2 9 c3 3232248392 c4 50336437 next-ethernet
+sudo vppctl create nsh entry nsp 185 nsi 254 md-type 1 c1 3232248395 c2 9 c3 3232248392 c4 50336437 next-ethernet
+
+sleep 2
+vxlan_gpe_index=`sudo vppctl sh int | grep "vxlan_gpe_tunnel0" | awk '{print $2}'`
+vxlan_index=`sudo vppctl sh int | grep "vxlan_tunnel0" | awk '{print $2}'`
+sudo vppctl create nsh map nsp 185 nsi 255 mapped-nsp 185 mapped-nsi 255 nsh_action pop encap-vxlan4-intf ${vxlan_index}
+sudo vppctl create nsh map nsp 185 nsi 254 mapped-nsp 185 mapped-nsi 254 nsh_action push encap-vxlan-gpe-intf ${vxlan_gpe_index}
+
+sudo vppctl ip route add 192.168.50.72/24 via 192.168.50.76
+sudo vppctl set ip arp $1 192.168.50.71 $2
+sudo vppctl set ip arp $1 192.168.50.72 $2
+
+sudo vppctl trace add dpdk-input 100
diff --git a/tests/nsh_sfc/sfc_scripts/set_nsh_proxy_outbound.sh b/tests/nsh_sfc/sfc_scripts/set_nsh_proxy_outbound.sh
new file mode 100755
index 0000000000..304ed30cda
--- /dev/null
+++ b/tests/nsh_sfc/sfc_scripts/set_nsh_proxy_outbound.sh
@@ -0,0 +1,32 @@
+#!/bin/bash
+
+set -x
+
+sudo service vpp restart
+sleep 5
+
+sudo vppctl set int state $1 up
+sleep 10
+sudo vppctl set int ip table $1 0
+sudo vppctl set int ip address $1 192.168.50.76/24
+
+sudo vppctl create vxlan-gpe tunnel local 192.168.50.76 remote 192.168.50.71 vni 9 next-nsh encap-vrf-id 0 decap-vrf-id 0
+sudo vppctl set int l2 bridge vxlan_gpe_tunnel0 1 1
+
+sudo vppctl create vxlan tunnel src 192.168.50.76 dst 192.168.50.72 vni 1 encap-vrf-id 0 decap-next node nsh-proxy
+sudo vppctl set int l2 bridge vxlan_tunnel0 1 1
+
+sudo vppctl create nsh entry nsp 185 nsi 255 md-type 1 c1 3232248395 c2 9 c3 3232248392 c4 50336437 next-ethernet
+sudo vppctl create nsh entry nsp 185 nsi 254 md-type 1 c1 3232248395 c2 9 c3 3232248392 c4 50336437 next-ethernet
+
+sleep 2
+vxlan_gpe_index=`sudo vppctl sh int | grep "vxlan_gpe_tunnel0" | awk '{print $2}'`
+vxlan_index=`sudo vppctl sh int | grep "vxlan_tunnel0" | awk '{print $2}'`
+sudo vppctl create nsh map nsp 185 nsi 255 mapped-nsp 185 mapped-nsi 255 nsh_action pop encap-vxlan4-intf ${vxlan_index}
+sudo vppctl create nsh map nsp 185 nsi 254 mapped-nsp 185 mapped-nsi 254 nsh_action push encap-vxlan-gpe-intf ${vxlan_gpe_index}
+
+sudo vppctl ip route add 192.168.50.72/24 via 192.168.50.76
+sudo vppctl set ip arp $1 192.168.50.71 $2
+sudo vppctl set ip arp $1 192.168.50.72 $2
+
+sudo vppctl trace add dpdk-input 100
diff --git a/tests/nsh_sfc/sfc_scripts/set_sfc_sff.sh b/tests/nsh_sfc/sfc_scripts/set_sfc_sff.sh
new file mode 100755
index 0000000000..03e2f0ade7
--- /dev/null
+++ b/tests/nsh_sfc/sfc_scripts/set_sfc_sff.sh
@@ -0,0 +1,32 @@
+#!/bin/bash
+
+set -x
+
+sudo service vpp restart
+sleep 5
+
+sudo vppctl set int state $1 up
+sleep 10
+sudo vppctl set int ip table $1 7
+sudo vppctl set int ip address $1 192.168.50.76/24
+
+sudo vppctl create vxlan-gpe tunnel local 192.168.50.76 remote 192.168.50.71 vni 9 next-nsh encap-vrf-id 7 decap-vrf-id 7
+sudo vppctl set int l2 bridge vxlan_gpe_tunnel0 1 1
+
+sudo vppctl create vxlan-gpe tunnel local 192.168.50.76 remote 192.168.50.72 vni 10 next-nsh encap-vrf-id 7 decap-vrf-id 7
+sudo vppctl set int l2 bridge vxlan_gpe_tunnel1 1 1
+
+sudo vppctl create nsh entry nsp 185 nsi 255 md-type 1 c1 3232248395 c2 9 c3 3232248392 c4 50336437 next-ethernet
+sudo vppctl create nsh entry nsp 185 nsi 254 md-type 1 c1 3232248395 c2 9 c3 3232248392 c4 50336437 next-ethernet
+
+sleep 2
+vxlan_gpe_index0=`sudo vppctl sh int | grep "vxlan_gpe_tunnel0" | awk '{print $2}'`
+vxlan_gpe_index1=`sudo vppctl sh int | grep "vxlan_gpe_tunnel1" | awk '{print $2}'`
+sudo vppctl create nsh map nsp 185 nsi 255 mapped-nsp 185 mapped-nsi 254 nsh_action swap encap-vxlan-gpe-intf ${vxlan_gpe_index0}
+
+sudo vppctl ip route add 192.168.50.71/32 via 192.168.50.76 $1
+sudo vppctl ip route add 192.168.50.72/32 via 192.168.50.76 $1
+sudo vppctl set ip arp fib-id 7 $1 192.168.50.71 $2
+sudo vppctl set ip arp fib-id 7 $1 192.168.50.72 $2
+
+sudo vppctl trace add dpdk-input 100
diff --git a/tests/nsh_sfc/sfc_scripts/start_tcpdump.sh b/tests/nsh_sfc/sfc_scripts/start_tcpdump.sh
new file mode 100755
index 0000000000..46f8217e26
--- /dev/null
+++ b/tests/nsh_sfc/sfc_scripts/start_tcpdump.sh
@@ -0,0 +1,16 @@
+#!/bin/bash
+
+ROOTDIR=/tmp/openvpp-testing
+PWDDIR=$(pwd)
+
+cd ${ROOTDIR}/nsh_sfc_tests/sfc_scripts/
+sudo rm -f temp_packet.pcap
+
+sudo /usr/sbin/tcpdump -i $1 -c 1 -w temp_packet.pcap dst host $2 &
+
+if [ ! $? -eq 0 ]; then
+    echo "Start the tcpdump failed!!!"
+    exit 1
+fi
+
+cd ${PWDDIR}