1 files changed, 124 insertions, 124 deletions

diff --git a/tests/perf/10ge2p1x520-dot1q-l2xcbase-ndrpdrdisc.robot b/tests/perf/10ge2p1x520-dot1q-l2xcbase-ndrpdrdisc.robot
index 77edc2adc9..397783176f 100644
--- a/tests/perf/10ge2p1x520-dot1q-l2xcbase-ndrpdrdisc.robot
+++ b/tests/perf/10ge2p1x520-dot1q-l2xcbase-ndrpdrdisc.robot
@@ -17,13 +17,13 @@
 | ...
 | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC
 | ... | NIC_Intel-X520-DA2 | L2XCFWD | BASE | DOT1Q
-| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
+| Suite Setup | Set up 3-node performance topology with DUT's NIC model
 | ... | L2 | Intel-X520-DA2
-| Suite Teardown | 3-node Performance Suite Teardown
+| Suite Teardown | Tear down 3-node performance topology
 | ...
 | ...
-| Test Setup | Performance test setup
-| Test Teardown | Performance test teardown | ${min_rate}pps | ${framesize}
+| Test Setup | Set up performance test
+| Test Teardown | Tear down performance discovery test | ${min_rate}pps | ${framesize}
 | ... | ${traffic_profile}
 | ...
 | Documentation | *RFC2544: Pkt throughput L2XC with 802.1q test cases*
@@ -69,17 +69,17 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
+| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
-| | And VPP interfaces in path are up in a 3-node circular topology
-| | When VLAN dot1q subinterfaces initialized on 3-node topology
+| | And Set interfaces in path in 3-node circular topology up
+| | When Initialize VLAN dot1q sub-interfaces in 3-node circular topology
 | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid}
-| | And L2 tag rewrite method setup on interfaces
+| | And Configure L2 tag rewrite method on interfaces
 | | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2}
 | | ... | ${tag_rewrite}
-| | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect
+| | And Connect interfaces and VLAN sub-interfaces using L2XC
 | | ... | ${dut1} | ${dut1_if1} | ${subif_index_1}
 | | ... | ${dut2} | ${dut2_if2} | ${subif_index_2}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
@@ -98,17 +98,17 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
+| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
-| | And VPP interfaces in path are up in a 3-node circular topology
-| | When VLAN dot1q subinterfaces initialized on 3-node topology
+| | And Set interfaces in path in 3-node circular topology up
+| | When Initialize VLAN dot1q sub-interfaces in 3-node circular topology
 | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid}
-| | And L2 tag rewrite method setup on interfaces
+| | And Configure L2 tag rewrite method on interfaces
 | | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2}
 | | ... | ${tag_rewrite}
-| | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect
+| | And Connect interfaces and VLAN sub-interfaces using L2XC
 | | ... | ${dut1} | ${dut1_if1} | ${subif_index_1}
 | | ... | ${dut2} | ${dut2_if2} | ${subif_index_2}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
@@ -128,17 +128,17 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
+| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
-| | And VPP interfaces in path are up in a 3-node circular topology
-| | When VLAN dot1q subinterfaces initialized on 3-node topology
+| | And Set interfaces in path in 3-node circular topology up
+| | When Initialize VLAN dot1q sub-interfaces in 3-node circular topology
 | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid}
-| | And L2 tag rewrite method setup on interfaces
+| | And Configure L2 tag rewrite method on interfaces
 | | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2}
 | | ... | ${tag_rewrite}
-| | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect
+| | And Connect interfaces and VLAN sub-interfaces using L2XC
 | | ... | ${dut1} | ${dut1_if1} | ${subif_index_1}
 | | ... | ${dut2} | ${dut2_if2} | ${subif_index_2}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
@@ -157,17 +157,17 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
+| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
-| | And VPP interfaces in path are up in a 3-node circular topology
-| | When VLAN dot1q subinterfaces initialized on 3-node topology
+| | And Set interfaces in path in 3-node circular topology up
+| | When Initialize VLAN dot1q sub-interfaces in 3-node circular topology
 | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid}
-| | And L2 tag rewrite method setup on interfaces
+| | And Configure L2 tag rewrite method on interfaces
 | | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2}
 | | ... | ${tag_rewrite}
-| | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect
+| | And Connect interfaces and VLAN sub-interfaces using L2XC
 | | ... | ${dut1} | ${dut1_if1} | ${subif_index_1}
 | | ... | ${dut2} | ${dut2_if2} | ${subif_index_2}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
@@ -187,16 +187,16 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
+| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
 | | And Apply startup configuration on all VPP DUTs
-| | And VPP interfaces in path are up in a 3-node circular topology
-| | When VLAN dot1q subinterfaces initialized on 3-node topology
+| | And Set interfaces in path in 3-node circular topology up
+| | When Initialize VLAN dot1q sub-interfaces in 3-node circular topology
 | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid}
-| | And L2 tag rewrite method setup on interfaces
+| | And Configure L2 tag rewrite method on interfaces
 | | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2}
 | | ... | ${tag_rewrite}
-| | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect
+| | And Connect interfaces and VLAN sub-interfaces using L2XC
 | | ... | ${dut1} | ${dut1_if1} | ${subif_index_1}
 | | ... | ${dut2} | ${dut2_if2} | ${subif_index_2}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
@@ -215,16 +215,16 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
+| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
 | | And Apply startup configuration on all VPP DUTs
-| | And VPP interfaces in path are up in a 3-node circular topology
-| | When VLAN dot1q subinterfaces initialized on 3-node topology
+| | And Set interfaces in path in 3-node circular topology up
+| | When Initialize VLAN dot1q sub-interfaces in 3-node circular topology
 | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid}
-| | And L2 tag rewrite method setup on interfaces
+| | And Configure L2 tag rewrite method on interfaces
 | | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2}
 | | ... | ${tag_rewrite}
-| | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect
+| | And Connect interfaces and VLAN sub-interfaces using L2XC
 | | ... | ${dut1} | ${dut1_if1} | ${subif_index_1}
 | | ... | ${dut2} | ${dut2_if2} | ${subif_index_2}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
@@ -244,17 +244,17 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
+| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
-| | And VPP interfaces in path are up in a 3-node circular topology
-| | When VLAN dot1q subinterfaces initialized on 3-node topology
+| | And Set interfaces in path in 3-node circular topology up
+| | When Initialize VLAN dot1q sub-interfaces in 3-node circular topology
 | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid}
-| | And L2 tag rewrite method setup on interfaces
+| | And Configure L2 tag rewrite method on interfaces
 | | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2}
 | | ... | ${tag_rewrite}
-| | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect
+| | And Connect interfaces and VLAN sub-interfaces using L2XC
 | | ... | ${dut1} | ${dut1_if1} | ${subif_index_1}
 | | ... | ${dut2} | ${dut2_if2} | ${subif_index_2}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
@@ -273,17 +273,17 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
+| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
-| | And VPP interfaces in path are up in a 3-node circular topology
-| | When VLAN dot1q subinterfaces initialized on 3-node topology
+| | And Set interfaces in path in 3-node circular topology up
+| | When Initialize VLAN dot1q sub-interfaces in 3-node circular topology
 | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid}
-| | And L2 tag rewrite method setup on interfaces
+| | And Configure L2 tag rewrite method on interfaces
 | | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2}
 | | ... | ${tag_rewrite}
-| | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect
+| | And Connect interfaces and VLAN sub-interfaces using L2XC
 | | ... | ${dut1} | ${dut1_if1} | ${subif_index_1}
 | | ... | ${dut2} | ${dut2_if2} | ${subif_index_2}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
@@ -303,17 +303,17 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
+| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
-| | And VPP interfaces in path are up in a 3-node circular topology
-| | When VLAN dot1q subinterfaces initialized on 3-node topology
+| | And Set interfaces in path in 3-node circular topology up
+| | When Initialize VLAN dot1q sub-interfaces in 3-node circular topology
 | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid}
-| | And L2 tag rewrite method setup on interfaces
+| | And Configure L2 tag rewrite method on interfaces
 | | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2}
 | | ... | ${tag_rewrite}
-| | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect
+| | And Connect interfaces and VLAN sub-interfaces using L2XC
 | | ... | ${dut1} | ${dut1_if1} | ${subif_index_1}
 | | ... | ${dut2} | ${dut2_if2} | ${subif_index_2}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
@@ -332,17 +332,17 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
+| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
-| | And VPP interfaces in path are up in a 3-node circular topology
-| | When VLAN dot1q subinterfaces initialized on 3-node topology
+| | And Set interfaces in path in 3-node circular topology up
+| | When Initialize VLAN dot1q sub-interfaces in 3-node circular topology
 | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid}
-| | And L2 tag rewrite method setup on interfaces
+| | And Configure L2 tag rewrite method on interfaces
 | | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2}
 | | ... | ${tag_rewrite}
-| | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect
+| | And Connect interfaces and VLAN sub-interfaces using L2XC
 | | ... | ${dut1} | ${dut1_if1} | ${subif_index_1}
 | | ... | ${dut2} | ${dut2_if2} | ${subif_index_2}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
@@ -362,16 +362,16 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
+| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
 | | And Apply startup configuration on all VPP DUTs
-| | And VPP interfaces in path are up in a 3-node circular topology
-| | When VLAN dot1q subinterfaces initialized on 3-node topology
+| | And Set interfaces in path in 3-node circular topology up
+| | When Initialize VLAN dot1q sub-interfaces in 3-node circular topology
 | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid}
-| | And L2 tag rewrite method setup on interfaces
+| | And Configure L2 tag rewrite method on interfaces
 | | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2}
 | | ... | ${tag_rewrite}
-| | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect
+| | And Connect interfaces and VLAN sub-interfaces using L2XC
 | | ... | ${dut1} | ${dut1_if1} | ${subif_index_1}
 | | ... | ${dut2} | ${dut2_if2} | ${subif_index_2}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
@@ -390,16 +390,16 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
+| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
 | | And Apply startup configuration on all VPP DUTs
-| | And VPP interfaces in path are up in a 3-node circular topology
-| | When VLAN dot1q subinterfaces initialized on 3-node topology
+| | And Set interfaces in path in 3-node circular topology up
+| | When Initialize VLAN dot1q sub-interfaces in 3-node circular topology
 | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid}
-| | And L2 tag rewrite method setup on interfaces
+| | And Configure L2 tag rewrite method on interfaces
 | | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2}
 | | ... | ${tag_rewrite}
-| | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect
+| | And Connect interfaces and VLAN sub-interfaces using L2XC
 | | ... | ${dut1} | ${dut1_if1} | ${subif_index_1}
 | | ... | ${dut2} | ${dut2_if2} | ${subif_index_2}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
@@ -419,17 +419,17 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
+| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
-| | And VPP interfaces in path are up in a 3-node circular topology
-| | When VLAN dot1q subinterfaces initialized on 3-node topology
+| | And Set interfaces in path in 3-node circular topology up
+| | When Initialize VLAN dot1q sub-interfaces in 3-node circular topology
 | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid}
-| | And L2 tag rewrite method setup on interfaces
+| | And Configure L2 tag rewrite method on interfaces
 | | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2}
 | | ... | ${tag_rewrite}
-| | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect
+| | And Connect interfaces and VLAN sub-interfaces using L2XC
 | | ... | ${dut1} | ${dut1_if1} | ${subif_index_1}
 | | ... | ${dut2} | ${dut2_if2} | ${subif_index_2}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
@@ -448,17 +448,17 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
+| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
-| | And VPP interfaces in path are up in a 3-node circular topology
-| | When VLAN dot1q subinterfaces initialized on 3-node topology
+| | And Set interfaces in path in 3-node circular topology up
+| | When Initialize VLAN dot1q sub-interfaces in 3-node circular topology
 | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid}
-| | And L2 tag rewrite method setup on interfaces
+| | And Configure L2 tag rewrite method on interfaces
 | | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2}
 | | ... | ${tag_rewrite}
-| | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect
+| | And Connect interfaces and VLAN sub-interfaces using L2XC
 | | ... | ${dut1} | ${dut1_if1} | ${subif_index_1}
 | | ... | ${dut2} | ${dut2_if2} | ${subif_index_2}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
@@ -478,17 +478,17 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
+| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
-| | And VPP interfaces in path are up in a 3-node circular topology
-| | When VLAN dot1q subinterfaces initialized on 3-node topology
+| | And Set interfaces in path in 3-node circular topology up
+| | When Initialize VLAN dot1q sub-interfaces in 3-node circular topology
 | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid}
-| | And L2 tag rewrite method setup on interfaces
+| | And Configure L2 tag rewrite method on interfaces
 | | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2}
 | | ... | ${tag_rewrite}
-| | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect
+| | And Connect interfaces and VLAN sub-interfaces using L2XC
 | | ... | ${dut1} | ${dut1_if1} | ${subif_index_1}
 | | ... | ${dut2} | ${dut2_if2} | ${subif_index_2}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
@@ -507,17 +507,17 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
+| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
-| | And VPP interfaces in path are up in a 3-node circular topology
-| | When VLAN dot1q subinterfaces initialized on 3-node topology
+| | And Set interfaces in path in 3-node circular topology up
+| | When Initialize VLAN dot1q sub-interfaces in 3-node circular topology
 | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid}
-| | And L2 tag rewrite method setup on interfaces
+| | And Configure L2 tag rewrite method on interfaces
 | | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2}
 | | ... | ${tag_rewrite}
-| | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect
+| | And Connect interfaces and VLAN sub-interfaces using L2XC
 | | ... | ${dut1} | ${dut1_if1} | ${subif_index_1}
 | | ... | ${dut2} | ${dut2_if2} | ${subif_index_2}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
@@ -537,16 +537,16 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
+| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
 | | And Apply startup configuration on all VPP DUTs
-| | And VPP interfaces in path are up in a 3-node circular topology
-| | When VLAN dot1q subinterfaces initialized on 3-node topology
+| | And Set interfaces in path in 3-node circular topology up
+| | When Initialize VLAN dot1q sub-interfaces in 3-node circular topology
 | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid}
-| | And L2 tag rewrite method setup on interfaces
+| | And Configure L2 tag rewrite method on interfaces
 | | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2}
 | | ... | ${tag_rewrite}
-| | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect
+| | And Connect interfaces and VLAN sub-interfaces using L2XC
 | | ... | ${dut1} | ${dut1_if1} | ${subif_index_1}
 | | ... | ${dut2} | ${dut2_if2} | ${subif_index_2}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
@@ -565,16 +565,16 @@
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
+| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
 | | And Apply startup configuration on all VPP DUTs
-| | And VPP interfaces in path are up in a 3-node circular topology
-| | When VLAN dot1q subinterfaces initialized on 3-node topology
+| | And Set interfaces in path in 3-node circular topology up
+| | When Initialize VLAN dot1q sub-interfaces in 3-node circular topology
 | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid}
-| | And L2 tag rewrite method setup on interfaces
+| | And Configure L2 tag rewrite method on interfaces
 | | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2}
 | | ... | ${tag_rewrite}
-| | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect
+| | And Connect interfaces and VLAN sub-interfaces using L2XC
 | | ... | ${dut1} | ${dut1_if1} | ${subif_index_1}
 | | ... | ${dut2} | ${dut2_if2} | ${subif_index_2}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}