diff options
Diffstat (limited to 'tests/perf/10ge2p1x520-eth-l2bdbasemaclrn-eth-4vhost-2vm-ndrpdrdisc.robot')
| -rw-r--r-- | tests/perf/10ge2p1x520-eth-l2bdbasemaclrn-eth-4vhost-2vm-ndrpdrdisc.robot | 564 |
1 files changed, 564 insertions, 0 deletions
diff --git a/tests/perf/10ge2p1x520-eth-l2bdbasemaclrn-eth-4vhost-2vm-ndrpdrdisc.robot b/tests/perf/10ge2p1x520-eth-l2bdbasemaclrn-eth-4vhost-2vm-ndrpdrdisc.robot new file mode 100644 index 0000000000..320b1c060e --- /dev/null +++ b/tests/perf/10ge2p1x520-eth-l2bdbasemaclrn-eth-4vhost-2vm-ndrpdrdisc.robot @@ -0,0 +1,564 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance.robot +| Library | resources.libraries.python.QemuUtils +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC +| ... | NIC_Intel-X520-DA2 | ETH | L2BDMACLRN | BASE | VHOST | VM +| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model +| ... | L2 | Intel-X520-DA2 +| Suite Teardown | 3-node Performance Suite Teardown +| Test Setup | Setup all DUTs before test +| Test Teardown | Run Keywords +| ... | Show Bridge Domain Data On All DUTs +| ... | AND | Performance test with vhost and VM with dpdk-testpmd teardown +| ... | ${min_rate}pps | ${framesize} | 3-node-bridge +| ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} +| ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} +| Documentation | *RFC2544: Pkt throughput L2BD test cases with vhost* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge- +| ... | domains and MAC learning enabled. Qemu Guests are connected to VPP via +| ... | vhost-user interfaces. Guests are running DPDK testpmd interconnecting +| ... | vhost-user interfaces using 5 cores pinned to cpus 6-10 and 11-15 and +| ... | 2048M memory. Testpmd is using socket-mem=1024M (512x2M hugepages), +| ... | 5 cores (1 main core and 4 cores dedicated for io), forwarding mode is +| ... | set to io, rxd/txd=256, burst=64. DUT1, DUT2 are tested with 2p10GE NIC +| ... | X520 Niantic by Intel. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop +| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage +| ... | of packets transmitted. NDR and PDR are discovered for different +| ... | Ethernet L2 frame sizes using either binary search or linear search +| ... | algorithms with configured starting rate and final step that determines +| ... | throughput measurement resolution. Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, 253 flows per flow-group) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static +| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +#X520-DA2 bandwidth limit +| ${s_limit}= | ${10000000000} +#CPU settings +| ${system_cpus}= | ${1} +| ${vpp_cpus}= | ${5} +| ${vm_cpus}= | ${5} + +*** Test Cases *** +| tc01-64B-1t1c-eth-l2bdbasemaclrn-eth-4vhost-2vm-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, \ +| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames \ +| | ... | using binary search start at 10GE linerate, step 10kpps. +| | [Tags] | 1T1C | STHREAD | NDRDISC +| | ${framesize}= | Set Variable | ${64} +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${dut1_vm_refs}= | Create Dictionary +| | ${dut2_vm_refs}= | Create Dictionary +| | Set Test Variable | ${dut1_vm_refs} +| | Set Test Variable | ${dut2_vm_refs} +| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When L2 bridge domains with Vhost-User for '2' VMs initialized in a 3-node circular topology +| | And '2' Guest VMs with dpdk-testpmd connected via vhost-user is setup in a 3-node circular topology +| | And Setup scheduler policy for VPP on all DUTs +| | Then Find NDR using binary search and pps +| | ... | ${framesize} | ${binary_min} | ${binary_max} | 3-node-bridge +| | ... | ${min_rate} | ${max_rate} | ${threshold} + +| tc02-64B-1t1c-eth-l2bdbasemaclrn-eth-4vhost-2vm-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, \ +| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames \ +| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%. +| | [Tags] | 1T1C | STHREAD | PDRDISC | SKIP_PATCH +| | ${framesize}= | Set Variable | ${64} +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${dut1_vm_refs}= | Create Dictionary +| | ${dut2_vm_refs}= | Create Dictionary +| | Set Test Variable | ${dut1_vm_refs} +| | Set Test Variable | ${dut2_vm_refs} +| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When L2 bridge domains with Vhost-User for '2' VMs initialized in a 3-node circular topology +| | And '2' Guest VMs with dpdk-testpmd connected via vhost-user is setup in a 3-node circular topology +| | And Setup scheduler policy for VPP on all DUTs +| | Then Find PDR using binary search and pps +| | ... | ${framesize} | ${binary_min} | ${binary_max} | 3-node-bridge +| | ... | ${min_rate} | ${max_rate} | ${threshold} +| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} + +| tc03-1518B-1t1c-eth-l2bdbasemaclrn-eth-4vhost-2vm-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, \ +| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1518 Byte frames \ +| | ... | using binary search start at 10GE linerate, step 10kpps. +| | [Tags] | 1T1C | STHREAD | NDRDISC +| | ${framesize}= | Set Variable | ${1518} +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${dut1_vm_refs}= | Create Dictionary +| | ${dut2_vm_refs}= | Create Dictionary +| | Set Test Variable | ${dut1_vm_refs} +| | Set Test Variable | ${dut2_vm_refs} +| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When L2 bridge domains with Vhost-User for '2' VMs initialized in a 3-node circular topology +| | And '2' Guest VMs with dpdk-testpmd connected via vhost-user is setup in a 3-node circular topology +| | And Setup scheduler policy for VPP on all DUTs +| | Then Find NDR using binary search and pps +| | ... | ${framesize} | ${binary_min} | ${binary_max} | 3-node-bridge +| | ... | ${min_rate} | ${max_rate} | ${threshold} + +| tc04-1518B-1t1c-eth-l2bdbasemaclrn-eth-4vhost-2vm-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, \ +| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 1518 Byte frames \ +| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%. +| | [Tags] | 1T1C | STHREAD | PDRDISC | SKIP_PATCH +| | ${framesize}= | Set Variable | ${1518} +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${dut1_vm_refs}= | Create Dictionary +| | ${dut2_vm_refs}= | Create Dictionary +| | Set Test Variable | ${dut1_vm_refs} +| | Set Test Variable | ${dut2_vm_refs} +| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When L2 bridge domains with Vhost-User for '2' VMs initialized in a 3-node circular topology +| | And '2' Guest VMs with dpdk-testpmd connected via vhost-user is setup in a 3-node circular topology +| | And Setup scheduler policy for VPP on all DUTs +| | Then Find PDR using binary search and pps +| | ... | ${framesize} | ${binary_min} | ${binary_max} | 3-node-bridge +| | ... | ${min_rate} | ${max_rate} | ${threshold} +| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} + +| tc05-IMIX-1t1c-eth-l2bdbasemaclrn-eth-4vhost-2vm-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, \ +| | ... | 1 receive queue per NIC port. [Ver] Find NDR for IMIX_v4_1 frame \ +| | ... | size using binary search start at 10GE linerate, step 5kpps. +| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) +| | [Tags] | 1T1C | STHREAD | NDRDISC +| | ${framesize}= | Set Variable | IMIX_v4_1 +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${dut1_vm_refs}= | Create Dictionary +| | ${dut2_vm_refs}= | Create Dictionary +| | Set Test Variable | ${dut1_vm_refs} +| | Set Test Variable | ${dut2_vm_refs} +| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When L2 bridge domains with Vhost-User for '2' VMs initialized in a 3-node circular topology +| | And '2' Guest VMs with dpdk-testpmd connected via vhost-user is setup in a 3-node circular topology +| | And Setup scheduler policy for VPP on all DUTs +| | Then Find NDR using binary search and pps +| | ... | ${framesize} | ${binary_min} | ${binary_max} | 3-node-bridge +| | ... | ${min_rate} | ${max_rate} | ${threshold} + +| tc06-IMIX-1t1c-eth-l2bdbasemaclrn-eth-4vhost-2vm-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, \ +| | ... | 1 receive queue per NIC port. [Ver] Find PDR for IMIX_v4_1 frame \ +| | ... | size using binary search start at 10GE linerate, step 5kpps, LT=0.5%. +| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) +| | [Tags] | 1T1C | STHREAD | PDRDISC | SKIP_PATCH +| | ${framesize}= | Set Variable | IMIX_v4_1 +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${dut1_vm_refs}= | Create Dictionary +| | ${dut2_vm_refs}= | Create Dictionary +| | Set Test Variable | ${dut1_vm_refs} +| | Set Test Variable | ${dut2_vm_refs} +| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When L2 bridge domains with Vhost-User for '2' VMs initialized in a 3-node circular topology +| | And '2' Guest VMs with dpdk-testpmd connected via vhost-user is setup in a 3-node circular topology +| | And Setup scheduler policy for VPP on all DUTs +| | Then Find PDR using binary search and pps +| | ... | ${framesize} | ${binary_min} | ${binary_max} | 3-node-bridge +| | ... | ${min_rate} | ${max_rate} | ${threshold} +| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} + +| tc07-64B-2t2c-eth-l2bdbasemaclrn-eth-4vhost-2vm-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, \ +| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames \ +| | ... | using binary search start at 10GE linerate, step 10kpps. +| | [Tags] | 2T2C | MTHREAD | NDRDISC +| | ${framesize}= | Set Variable | ${64} +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${dut1_vm_refs}= | Create Dictionary +| | ${dut2_vm_refs}= | Create Dictionary +| | Set Test Variable | ${dut1_vm_refs} +| | Set Test Variable | ${dut2_vm_refs} +| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When L2 bridge domains with Vhost-User for '2' VMs initialized in a 3-node circular topology +| | And '2' Guest VMs with dpdk-testpmd connected via vhost-user is setup in a 3-node circular topology +| | And Setup scheduler policy for VPP on all DUTs +| | Then Find NDR using binary search and pps +| | ... | ${framesize} | ${binary_min} | ${binary_max} | 3-node-bridge +| | ... | ${min_rate} | ${max_rate} | ${threshold} + +| tc08-64B-2t2c-eth-l2bdbasemaclrn-eth-4vhost-2vm-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, \ +| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames \ +| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%. +| | [Tags] | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH +| | ${framesize}= | Set Variable | ${64} +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${dut1_vm_refs}= | Create Dictionary +| | ${dut2_vm_refs}= | Create Dictionary +| | Set Test Variable | ${dut1_vm_refs} +| | Set Test Variable | ${dut2_vm_refs} +| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When L2 bridge domains with Vhost-User for '2' VMs initialized in a 3-node circular topology +| | And '2' Guest VMs with dpdk-testpmd connected via vhost-user is setup in a 3-node circular topology +| | And Setup scheduler policy for VPP on all DUTs +| | Then Find PDR using binary search and pps +| | ... | ${framesize} | ${binary_min} | ${binary_max} | 3-node-bridge +| | ... | ${min_rate} | ${max_rate} | ${threshold} +| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} + +| tc09-1518B-2t2c-eth-l2bdbasemaclrn-eth-4vhost-2vm-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, \ +| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1518 Byte frames \ +| | ... | using binary search start at 10GE linerate, step 10kpps. +| | [Tags] | 2T2C | MTHREAD | NDRDISC | SKIP_PATCH +| | ${framesize}= | Set Variable | ${1518} +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${dut1_vm_refs}= | Create Dictionary +| | ${dut2_vm_refs}= | Create Dictionary +| | Set Test Variable | ${dut1_vm_refs} +| | Set Test Variable | ${dut2_vm_refs} +| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When L2 bridge domains with Vhost-User for '2' VMs initialized in a 3-node circular topology +| | And '2' Guest VMs with dpdk-testpmd connected via vhost-user is setup in a 3-node circular topology +| | And Setup scheduler policy for VPP on all DUTs +| | Then Find NDR using binary search and pps +| | ... | ${framesize} | ${binary_min} | ${binary_max} | 3-node-bridge +| | ... | ${min_rate} | ${max_rate} | ${threshold} + +| tc10-1518B-2t2c-eth-l2bdbasemaclrn-eth-4vhost-2vm-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, \ +| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 1518 Byte frames \ +| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%. +| | [Tags] | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH +| | ${framesize}= | Set Variable | ${1518} +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${dut1_vm_refs}= | Create Dictionary +| | ${dut2_vm_refs}= | Create Dictionary +| | Set Test Variable | ${dut1_vm_refs} +| | Set Test Variable | ${dut2_vm_refs} +| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When L2 bridge domains with Vhost-User for '2' VMs initialized in a 3-node circular topology +| | And '2' Guest VMs with dpdk-testpmd connected via vhost-user is setup in a 3-node circular topology +| | And Setup scheduler policy for VPP on all DUTs +| | Then Find PDR using binary search and pps +| | ... | ${framesize} | ${binary_min} | ${binary_max} | 3-node-bridge +| | ... | ${min_rate} | ${max_rate} | ${threshold} +| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} + +| tc11-IMIX-2t2c-eth-l2bdbasemaclrn-eth-4vhost-2vm-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, \ +| | ... | 1 receive queue per NIC port. [Ver] Find NDR for IMIX_v4_1 frame \ +| | ... | size using binary search start at 10GE linerate, step 5kpps. +| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) +| | [Tags] | 2T2C | MTHREAD | NDRDISC | SKIP_PATCH +| | ${framesize}= | Set Variable | IMIX_v4_1 +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${dut1_vm_refs}= | Create Dictionary +| | ${dut2_vm_refs}= | Create Dictionary +| | Set Test Variable | ${dut1_vm_refs} +| | Set Test Variable | ${dut2_vm_refs} +| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When L2 bridge domains with Vhost-User for '2' VMs initialized in a 3-node circular topology +| | And '2' Guest VMs with dpdk-testpmd connected via vhost-user is setup in a 3-node circular topology +| | And Setup scheduler policy for VPP on all DUTs +| | Then Find NDR using binary search and pps +| | ... | ${framesize} | ${binary_min} | ${binary_max} | 3-node-bridge +| | ... | ${min_rate} | ${max_rate} | ${threshold} + +| tc12-IMIX-2t2c-eth-l2bdbasemaclrn-eth-4vhost-2vm-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, \ +| | ... | 1 receive queue per NIC port. [Ver] Find PDR for IMIX_v4_1 frame \ +| | ... | size using binary search start at 10GE linerate, step 5kpps, LT=0.5%. +| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) +| | [Tags] | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH +| | ${framesize}= | Set Variable | IMIX_v4_1 +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${dut1_vm_refs}= | Create Dictionary +| | ${dut2_vm_refs}= | Create Dictionary +| | Set Test Variable | ${dut1_vm_refs} +| | Set Test Variable | ${dut2_vm_refs} +| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When L2 bridge domains with Vhost-User for '2' VMs initialized in a 3-node circular topology +| | And '2' Guest VMs with dpdk-testpmd connected via vhost-user is setup in a 3-node circular topology +| | And Setup scheduler policy for VPP on all DUTs +| | Then Find PDR using binary search and pps +| | ... | ${framesize} | ${binary_min} | ${binary_max} | 3-node-bridge +| | ... | ${min_rate} | ${max_rate} | ${threshold} +| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} + +| tc13-64B-4t4c-eth-l2bdbasemaclrn-eth-4vhost-2vm-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, \ +| | ... | 2 receive queues per NIC port. [Ver] Find NDR for 64 Byte frames \ +| | ... | using binary search start at 10GE linerate, step 10kpps. +| | [Tags] | 4T4C | MTHREAD | NDRDISC +| | ${framesize}= | Set Variable | ${64} +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${dut1_vm_refs}= | Create Dictionary +| | ${dut2_vm_refs}= | Create Dictionary +| | Set Test Variable | ${dut1_vm_refs} +| | Set Test Variable | ${dut2_vm_refs} +| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When L2 bridge domains with Vhost-User for '2' VMs initialized in a 3-node circular topology +| | And '2' Guest VMs with dpdk-testpmd connected via vhost-user is setup in a 3-node circular topology +| | And Setup scheduler policy for VPP on all DUTs +| | Then Find NDR using binary search and pps +| | ... | ${framesize} | ${binary_min} | ${binary_max} | 3-node-bridge +| | ... | ${min_rate} | ${max_rate} | ${threshold} + +| tc14-64B-4t4c-eth-l2bdbasemaclrn-eth-4vhost-2vm-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, \ +| | ... | 2 receive queues per NIC port. [Ver] Find PDR for 64 Byte frames \ +| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%. +| | [Tags] | 4T4C | MTHREAD | PDRDISC | SKIP_PATCH +| | ${framesize}= | Set Variable | ${64} +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${dut1_vm_refs}= | Create Dictionary +| | ${dut2_vm_refs}= | Create Dictionary +| | Set Test Variable | ${dut1_vm_refs} +| | Set Test Variable | ${dut2_vm_refs} +| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When L2 bridge domains with Vhost-User for '2' VMs initialized in a 3-node circular topology +| | And '2' Guest VMs with dpdk-testpmd connected via vhost-user is setup in a 3-node circular topology +| | And Setup scheduler policy for VPP on all DUTs +| | Then Find PDR using binary search and pps +| | ... | ${framesize} | ${binary_min} | ${binary_max} | 3-node-bridge +| | ... | ${min_rate} | ${max_rate} | ${threshold} +| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} + +| tc15-1518B-4t4c-eth-l2bdbasemaclrn-eth-4vhost-2vm-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, \ +| | ... | 2 receive queues per NIC port. [Ver] Find NDR for 1518 Byte frames \ +| | ... | using binary search start at 10GE linerate, step 10kpps. +| | [Tags] | 4T4C | MTHREAD | NDRDISC | SKIP_PATCH +| | ${framesize}= | Set Variable | ${1518} +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${dut1_vm_refs}= | Create Dictionary +| | ${dut2_vm_refs}= | Create Dictionary +| | Set Test Variable | ${dut1_vm_refs} +| | Set Test Variable | ${dut2_vm_refs} +| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When L2 bridge domains with Vhost-User for '2' VMs initialized in a 3-node circular topology +| | And '2' Guest VMs with dpdk-testpmd connected via vhost-user is setup in a 3-node circular topology +| | And Setup scheduler policy for VPP on all DUTs +| | Then Find NDR using binary search and pps +| | ... | ${framesize} | ${binary_min} | ${binary_max} | 3-node-bridge +| | ... | ${min_rate} | ${max_rate} | ${threshold} + +| tc16-1518B-4t4c-eth-l2bdbasemaclrn-eth-4vhost-2vm-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, \ +| | ... | 2 receive queues per NIC port. [Ver] Find PDR for 1518 Byte frames \ +| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%. +| | [Tags] | 4T4C | MTHREAD | PDRDISC | SKIP_PATCH +| | ${framesize}= | Set Variable | ${1518} +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${dut1_vm_refs}= | Create Dictionary +| | ${dut2_vm_refs}= | Create Dictionary +| | Set Test Variable | ${dut1_vm_refs} +| | Set Test Variable | ${dut2_vm_refs} +| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When L2 bridge domains with Vhost-User for '2' VMs initialized in a 3-node circular topology +| | And '2' Guest VMs with dpdk-testpmd connected via vhost-user is setup in a 3-node circular topology +| | And Setup scheduler policy for VPP on all DUTs +| | Then Find PDR using binary search and pps +| | ... | ${framesize} | ${binary_min} | ${binary_max} | 3-node-bridge +| | ... | ${min_rate} | ${max_rate} | ${threshold} +| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} + +| tc17-IMIX-4t4c-eth-l2bdbasemaclrn-eth-4vhost-2vm-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, \ +| | ... | 2 receive queues per NIC port. [Ver] Find NDR for IMIX_v4_1 frame \ +| | ... | size using binary search start at 10GE linerate, step 5kpps. +| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) +| | [Tags] | 4T4C | MTHREAD | NDRDISC | SKIP_PATCH +| | ${framesize}= | Set Variable | IMIX_v4_1 +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${dut1_vm_refs}= | Create Dictionary +| | ${dut2_vm_refs}= | Create Dictionary +| | Set Test Variable | ${dut1_vm_refs} +| | Set Test Variable | ${dut2_vm_refs} +| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When L2 bridge domains with Vhost-User for '2' VMs initialized in a 3-node circular topology +| | And '2' Guest VMs with dpdk-testpmd connected via vhost-user is setup in a 3-node circular topology +| | And Setup scheduler policy for VPP on all DUTs +| | Then Find NDR using binary search and pps +| | ... | ${framesize} | ${binary_min} | ${binary_max} | 3-node-bridge +| | ... | ${min_rate} | ${max_rate} | ${threshold} + +| tc18-IMIX-4t4c-eth-l2bdbasemaclrn-eth-4vhost-2vm-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, \ +| | ... | 2 receive queues per NIC port. [Ver] Find PDR for IMIX_v4_1 frame \ +| | ... | size using binary search start at 10GE linerate, step 5kpps, LT=0.5%. +| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) +| | [Tags] | 4T4C | MTHREAD | PDRDISC | SKIP_PATCH +| | ${framesize}= | Set Variable | IMIX_v4_1 +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${dut1_vm_refs}= | Create Dictionary +| | ${dut2_vm_refs}= | Create Dictionary +| | Set Test Variable | ${dut1_vm_refs} +| | Set Test Variable | ${dut2_vm_refs} +| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When L2 bridge domains with Vhost-User for '2' VMs initialized in a 3-node circular topology +| | And '2' Guest VMs with dpdk-testpmd connected via vhost-user is setup in a 3-node circular topology +| | And Setup scheduler policy for VPP on all DUTs +| | Then Find PDR using binary search and pps +| | ... | ${framesize} | ${binary_min} | ${binary_max} | 3-node-bridge +| | ... | ${min_rate} | ${max_rate} | ${threshold} +| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} |