diff options
Diffstat (limited to 'tests/perf/40ge2p1xl710-ethip4ipsecscaleip4-ip4base-interfaces-aes-gcm-ndrpdrdisc.robot')
| -rw-r--r-- | tests/perf/40ge2p1xl710-ethip4ipsecscaleip4-ip4base-interfaces-aes-gcm-ndrpdrdisc.robot | 615 |
1 files changed, 615 insertions, 0 deletions
diff --git a/tests/perf/40ge2p1xl710-ethip4ipsecscaleip4-ip4base-interfaces-aes-gcm-ndrpdrdisc.robot b/tests/perf/40ge2p1xl710-ethip4ipsecscaleip4-ip4base-interfaces-aes-gcm-ndrpdrdisc.robot new file mode 100644 index 0000000000..6d15a8cf1a --- /dev/null +++ b/tests/perf/40ge2p1xl710-ethip4ipsecscaleip4-ip4base-interfaces-aes-gcm-ndrpdrdisc.robot @@ -0,0 +1,615 @@ +# Copyright (c) 2017 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance.robot +| Resource | resources/libraries/robot/ipsec.robot +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | SCALE | NDRPDRDISC +| ... | IP4FWD | IPSEC | IPSECHW | IPSECTUN | NIC_Intel-XL710 +| ... +| Suite Setup | Run Keywords +| ... | 3-node Performance Suite Setup with DUT's NIC model | L3 | Intel-XL710 +| ... | AND | Verify Crypto Device On All DUTs | force_init=${True} +| ... | AND | Verify Kernel Module On All DUTs | igb_uio | force_load=${True} +| Suite Teardown | 3-node Performance Suite Teardown +| ... +| Test Setup | Performance test setup +| Test Teardown | Performance test teardown | ${min_rate}pps | ${framesize} +| ... | 3-node-IPv4-dst-${n_tunnels} +| ... +| Documentation | *IPv4 IPsec tunnel mode performance test suite.* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, +| ... | Eth-IPv4-IPSec on DUT1-DUT2 +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple +| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it +| ... | and send to another DUT, where packets are decrypted and sent back to TG +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop +| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in number +| ... | of packets transmitted. NDR is discovered for different +| ... | number of IPsec tunnels using binary search algorithms with configured +| ... | starting rate and final step that determines throughput measurement +| ... | resolution. Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, number of flows per flow-group equals to +| ... | number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to both streams. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +# XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps +| ${s_24.5G} | ${24500000000} +# XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps +| ${s_18.75Mpps} | ${18750000} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${dut1_if2_ip4}= | 172.168.1.1 +| ${dut2_if1_ip4}= | 172.168.1.2 +| ${dut2_if2_ip4}= | 192.168.20.1 +| ${tg_if2_ip4}= | 192.168.20.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${32} +| ${ipsec_overhead_gcm}= | ${54} + +*** Test Cases *** +| tc01-64B-1t1c-ethip4ipsecscale1ip4-ip4base-interfaces-aes-gcm-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUTs run 1 IPsec tunnel AES GCM in each direction, configured\ +| | ... | with 1 thread, 1 phy core, 1 receive queue per NIC port. +| | ... | [Ver] Find NDR for 64 Byte frames\ +| | ... | using binary search start at 40GE linerate, step 100kpps. +| | ... +| | [Tags] | 1T1C | STHREAD | NDRDISC +| | ... +| | ${n_tunnels}= | Set Variable | ${1} +| | ${framesize}= | Set Variable | ${64} +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Set Variable | ${s_18.75Mpps} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${encr_alg}= | Crypto Alg AES GCM 128 +| | ${auth_alg}= | Integ Alg AES GCM 128 +| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo +| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Add Cryptodev to all DUTs | ${1} +| | And Apply startup configuration on all VPP DUTs +| | And IPsec initialized in a 3-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${laddr_ip4} +| | ... | ${raddr_ip4} | ${addr_range} +| | Then Find NDR using binary search and pps | ${framesize} +| | ... | ${binary_min} | ${binary_max} | 3-node-IPv4-dst-${n_tunnels} +| | ... | ${min_rate} | ${max_rate} | ${threshold} + +| tc02-64B-1t1c-ethip4ipsecscale1ip4-ip4base-interfaces-aes-gcm-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUTs run 1 IPsec tunnel AES GCM in each direction, configured\ +| | ... | with 1 thread, 1 phy core, 1 receive queue per NIC port. +| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 40GE\ +| | ... | linerate, step 100kpps and loss tolerance of 0.5%. +| | ... +| | [Tags] | 1T1C | STHREAD | PDRDISC | SKIP_PATCH +| | ... +| | ${n_tunnels}= | Set Variable | ${1} +| | ${framesize}= | Set Variable | ${64} +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Set Variable | ${s_18.75Mpps} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${encr_alg}= | Crypto Alg AES GCM 128 +| | ${auth_alg}= | Integ Alg AES GCM 128 +| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo +| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Add Cryptodev to all DUTs | ${1} +| | And Apply startup configuration on all VPP DUTs +| | And IPsec initialized in a 3-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${laddr_ip4} +| | ... | ${raddr_ip4} | ${addr_range} +| | Then Find PDR using binary search and pps | ${framesize} +| | ... | ${binary_min} | ${binary_max} | 3-node-IPv4-dst-${n_tunnels} +| | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} + +| tc03-64B-1t1c-ethip4ipsecscale1000ip4-ip4base-interfaces-aes-gcm-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUTs run 1000 IPsec tunnels AES GCM in each direction,\ +| | ... | configured with 1 thread, 1 phy core, 1 receive queue per NIC port. +| | ... | [Ver] Find NDR for 64 Byte frames\ +| | ... | using binary search start at 40GE linerate, step 100kpps. +| | ... +| | [Tags] | 1T1C | STHREAD | NDRDISC +| | ... +| | ${n_tunnels}= | Set Variable | ${1000} +| | ${framesize}= | Set Variable | ${64} +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Set Variable | ${s_18.75Mpps} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${encr_alg}= | Crypto Alg AES GCM 128 +| | ${auth_alg}= | Integ Alg AES GCM 128 +| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo +| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Add Cryptodev to all DUTs | ${1} +| | And Apply startup configuration on all VPP DUTs +| | And IPsec initialized in a 3-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${laddr_ip4} +| | ... | ${raddr_ip4} | ${addr_range} +| | Then Find NDR using binary search and pps | ${framesize} +| | ... | ${binary_min} | ${binary_max} | 3-node-IPv4-dst-${n_tunnels} +| | ... | ${min_rate} | ${max_rate} | ${threshold} + +| tc04-64B-1t1c-ethip4ipsecscale1000ip4-ip4base-interfaces-aes-gcm-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUTs run 1000 IPsec tunnels AES GCM in each direction,\ +| | ... | configured with 1 thread, 1 phy core, 1 receive queue per NIC port. +| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 40GE\ +| | ... | linerate, step 100kpps and loss tolerance of 0.5%. +| | ... +| | [Tags] | 1T1C | STHREAD | PDRDISC | SKIP_PATCH +| | ... +| | ${n_tunnels}= | Set Variable | ${1000} +| | ${framesize}= | Set Variable | ${64} +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Set Variable | ${s_18.75Mpps} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${encr_alg}= | Crypto Alg AES GCM 128 +| | ${auth_alg}= | Integ Alg AES GCM 128 +| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo +| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Add Cryptodev to all DUTs | ${1} +| | And Apply startup configuration on all VPP DUTs +| | And IPsec initialized in a 3-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${laddr_ip4} +| | ... | ${raddr_ip4} | ${addr_range} +| | Then Find PDR using binary search and pps | ${framesize} +| | ... | ${binary_min} | ${binary_max} | 3-node-IPv4-dst-${n_tunnels} +| | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} + +| tc05-1518B-1t1c-ethip4ipsecscale1ip4-ip4base-interfaces-aes-gcm-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUTs run 1 IPsec tunnel AES GCM in each direction, configured\ +| | ... | with 1 thread, 1 phy core, 1 receive queue per NIC port. +| | ... | [Ver] Find NDR for 1518 Byte frames\ +| | ... | using binary search start at 40GE linerate, step 100kpps. +| | ... +| | [Tags] | 1T1C | STHREAD | NDRDISC +| | ... +| | ${n_tunnels}= | Set Variable | ${1} +| | ${framesize}= | Set Variable | ${1518} +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Calculate pps | ${s_24.5G} +| | ... | ${framesize + ${ipsec_overhead_gcm}} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${encr_alg}= | Crypto Alg AES GCM 128 +| | ${auth_alg}= | Integ Alg AES GCM 128 +| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo +| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add Cryptodev to all DUTs | ${1} +| | And Apply startup configuration on all VPP DUTs +| | And IPsec initialized in a 3-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${laddr_ip4} +| | ... | ${raddr_ip4} | ${addr_range} +| | Then Find NDR using binary search and pps | ${framesize} +| | ... | ${binary_min} | ${binary_max} | 3-node-IPv4-dst-${n_tunnels} +| | ... | ${min_rate} | ${max_rate} | ${threshold} + +| tc06-1518B-1t1c-ethip4ipsecscale1ip4-ip4base-interfaces-aes-gcm-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUTs run 1 IPsec tunnel AES GCM in each direction, configured\ +| | ... | with 1 thread, 1 phy core, 1 receive queue per NIC port. +| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 40GE\ +| | ... | linerate, step 100kpps and loss tolerance of 0.5%. +| | ... +| | [Tags] | 1T1C | STHREAD | PDRDISC | SKIP_PATCH +| | ... +| | ${n_tunnels}= | Set Variable | ${1} +| | ${framesize}= | Set Variable | ${1518} +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Calculate pps | ${s_24.5G} +| | ... | ${framesize + ${ipsec_overhead_gcm}} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${encr_alg}= | Crypto Alg AES GCM 128 +| | ${auth_alg}= | Integ Alg AES GCM 128 +| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo +| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add Cryptodev to all DUTs | ${1} +| | And Apply startup configuration on all VPP DUTs +| | And IPsec initialized in a 3-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${laddr_ip4} +| | ... | ${raddr_ip4} | ${addr_range} +| | Then Find PDR using binary search and pps | ${framesize} +| | ... | ${binary_min} | ${binary_max} | 3-node-IPv4-dst-${n_tunnels} +| | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} + +| tc07-1518B-1t1c-ethip4ipsecscale1000ip4-ip4base-interfaces-aes-gcm-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUTs run 1000 IPsec tunnels AES GCM in each direction,\ +| | ... | configured with 1 thread, 1 phy core, 1 receive queue per NIC port. +| | ... | [Ver] Find NDR for 1518 Byte frames\ +| | ... | using binary search start at 40GE linerate, step 100kpps. +| | ... +| | [Tags] | 1T1C | STHREAD | NDRDISC +| | ... +| | ${n_tunnels}= | Set Variable | ${1000} +| | ${framesize}= | Set Variable | ${1518} +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Calculate pps | ${s_24.5G} +| | ... | ${framesize + ${ipsec_overhead_gcm}} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${encr_alg}= | Crypto Alg AES GCM 128 +| | ${auth_alg}= | Integ Alg AES GCM 128 +| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo +| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add Cryptodev to all DUTs | ${1} +| | And Apply startup configuration on all VPP DUTs +| | And IPsec initialized in a 3-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${laddr_ip4} +| | ... | ${raddr_ip4} | ${addr_range} +| | Then Find NDR using binary search and pps | ${framesize} +| | ... | ${binary_min} | ${binary_max} | 3-node-IPv4-dst-${n_tunnels} +| | ... | ${min_rate} | ${max_rate} | ${threshold} + +| tc08-1518B-1t1c-ethip4ipsecscale1000ip4-ip4base-interfaces-aes-gcm-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUTs run 1000 IPsec tunnel AES GCM in each direction,\ +| | ... | configured with 1 thread, 1 phy core, 1 receive queue per NIC port. +| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 40GE\ +| | ... | linerate, step 100kpps and loss tolerance of 0.5%. +| | ... +| | [Tags] | 1T1C | STHREAD | PDRDISC | SKIP_PATCH +| | ... +| | ${n_tunnels}= | Set Variable | ${1000} +| | ${framesize}= | Set Variable | ${1518} +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Calculate pps | ${s_24.5G} +| | ... | ${framesize + ${ipsec_overhead_gcm}} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${encr_alg}= | Crypto Alg AES GCM 128 +| | ${auth_alg}= | Integ Alg AES GCM 128 +| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo +| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add Cryptodev to all DUTs | ${1} +| | And Apply startup configuration on all VPP DUTs +| | And IPsec initialized in a 3-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${laddr_ip4} +| | ... | ${raddr_ip4} | ${addr_range} +| | Then Find PDR using binary search and pps | ${framesize} +| | ... | ${binary_min} | ${binary_max} | 3-node-IPv4-dst-${n_tunnels} +| | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} + +| tc09-IMIX-1t1c-ethip4ipsecscale1ip4-ip4base-interfaces-aes-gcm-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUTs run 1 IPsec tunnel AES GCM in each direction, configured\ +| | ... | with 1 thread, 1 phy core, 1 receive queue per NIC port. +| | ... | [Ver] Find NDR for IMIX_v4_1 frames\ +| | ... | using binary search start at 40GE linerate, step 100kpps. +| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) +| | ... +| | [Tags] | 1T1C | STHREAD | NDRDISC +| | ... +| | ${n_tunnels}= | Set Variable | ${1} +| | ${framesize}= | Set Variable | IMIX_v4_1 +| | ${imix_size}= | Get Frame Size | ${framesize} +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Calculate pps | ${s_24.5G} +| | ... | ${imix_size} + ${ipsec_overhead_gcm} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${encr_alg}= | Crypto Alg AES GCM 128 +| | ${auth_alg}= | Integ Alg AES GCM 128 +| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo +| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add Cryptodev to all DUTs | ${1} +| | And Apply startup configuration on all VPP DUTs +| | And IPsec initialized in a 3-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${laddr_ip4} +| | ... | ${raddr_ip4} | ${addr_range} +| | Then Find NDR using binary search and pps | ${framesize} +| | ... | ${binary_min} | ${binary_max} | 3-node-IPv4-dst-${n_tunnels} +| | ... | ${min_rate} | ${max_rate} | ${threshold} + +| tc10-IMIX-1t1c-ethip4ipsecscale1ip4-ip4base-interfaces-aes-gcm-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUTs run 1 IPsec tunnel AES GCM in each direction, configured\ +| | ... | with 1 thread, 1 phy core, 1 receive queue per NIC port. +| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 40GE\ +| | ... | linerate, step 100kpps and loss tolerance of 0.5%. +| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) +| | ... +| | [Tags] | 1T1C | STHREAD | PDRDISC | SKIP_PATCH +| | ... +| | ${n_tunnels}= | Set Variable | ${1} +| | ${framesize}= | Set Variable | IMIX_v4_1 +| | ${imix_size}= | Get Frame Size | ${framesize} +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Calculate pps | ${s_24.5G} +| | ... | ${imix_size} + ${ipsec_overhead_gcm} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${encr_alg}= | Crypto Alg AES GCM 128 +| | ${auth_alg}= | Integ Alg AES GCM 128 +| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo +| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add Cryptodev to all DUTs | ${1} +| | And Apply startup configuration on all VPP DUTs +| | And IPsec initialized in a 3-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${laddr_ip4} +| | ... | ${raddr_ip4} | ${addr_range} +| | Then Find PDR using binary search and pps | ${framesize} +| | ... | ${binary_min} | ${binary_max} | 3-node-IPv4-dst-${n_tunnels} +| | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} + +| tc11-IMIX-1t1c-ethip4ipsecscale1000ip4-ip4base-interfaces-aes-gcm-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUTs run 1000 IPsec tunnels AES GCM in each direction,\ +| | ... | configured with 1 thread, 1 phy core, 1 receive queue per NIC port. +| | ... | [Ver] Find NDR for IMIX_v4_1 frames\ +| | ... | using binary search start at 40GE linerate, step 100kpps. +| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) +| | ... +| | [Tags] | 1T1C | STHREAD | NDRDISC +| | ... +| | ${n_tunnels}= | Set Variable | ${1000} +| | ${framesize}= | Set Variable | IMIX_v4_1 +| | ${imix_size}= | Get Frame Size | ${framesize} +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Calculate pps | ${s_24.5G} +| | ... | ${imix_size} + ${ipsec_overhead_gcm} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${encr_alg}= | Crypto Alg AES GCM 128 +| | ${auth_alg}= | Integ Alg AES GCM 128 +| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo +| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add Cryptodev to all DUTs | ${1} +| | And Apply startup configuration on all VPP DUTs +| | And IPsec initialized in a 3-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${laddr_ip4} +| | ... | ${raddr_ip4} | ${addr_range} +| | Then Find NDR using binary search and pps | ${framesize} +| | ... | ${binary_min} | ${binary_max} | 3-node-IPv4-dst-${n_tunnels} +| | ... | ${min_rate} | ${max_rate} | ${threshold} + +| tc12-IMIX-1t1c-ethip4ipsecscale1000ip4-ip4base-interfaces-aes-gcm-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUTs run 1000 IPsec tunnels AES GCM in each direction,\ +| | ... | configured with 1 thread, 1 phy core, 1 receive queue per NIC port. +| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 40GE\ +| | ... | linerate, step 100kpps and loss tolerance of 0.5%. +| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) +| | ... +| | [Tags] | 1T1C | STHREAD | PDRDISC | SKIP_PATCH +| | ... +| | ${n_tunnels}= | Set Variable | ${1000} +| | ${framesize}= | Set Variable | IMIX_v4_1 +| | ${imix_size}= | Get Frame Size | ${framesize} +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Calculate pps | ${s_24.5G} +| | ... | ${imix_size} + ${ipsec_overhead_gcm} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${encr_alg}= | Crypto Alg AES GCM 128 +| | ${auth_alg}= | Integ Alg AES GCM 128 +| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo +| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add Cryptodev to all DUTs | ${1} +| | And Apply startup configuration on all VPP DUTs +| | And IPsec initialized in a 3-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${laddr_ip4} +| | ... | ${raddr_ip4} | ${addr_range} +| | Then Find PDR using binary search and pps | ${framesize} +| | ... | ${binary_min} | ${binary_max} | 3-node-IPv4-dst-${n_tunnels} +| | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} + +| tc13-64B-2t2c-ethip4ipsecscale1ip4-ip4base-interfaces-aes-gcm-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUTs run 1 IPsec tunnel AES GCM in each direction, configured\ +| | ... | with 2 thread, 2 phy core, 1 receive queue per NIC port. +| | ... | [Ver] Find NDR for 64 Byte frames\ +| | ... | using binary search start at 40GE linerate, step 100kpps. +| | ... +| | [Tags] | 2T2C | MTHREAD | NDRDISC +| | ... +| | ${n_tunnels}= | Set Variable | ${1} +| | ${framesize}= | Set Variable | ${64} +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Set Variable | ${s_18.75Mpps} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${encr_alg}= | Crypto Alg AES GCM 128 +| | ${auth_alg}= | Integ Alg AES GCM 128 +| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo +| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Add Cryptodev to all DUTs | ${2} +| | And Apply startup configuration on all VPP DUTs +| | And IPsec initialized in a 3-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${laddr_ip4} +| | ... | ${raddr_ip4} | ${addr_range} +| | Then Find NDR using binary search and pps | ${framesize} +| | ... | ${binary_min} | ${binary_max} | 3-node-IPv4-dst-${n_tunnels} +| | ... | ${min_rate} | ${max_rate} | ${threshold} + +| tc14-64B-2t2c-ethip4ipsecscale1ip4-ip4base-interfaces-aes-gcm-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUTs run 1 IPsec tunnel AES GCM in each direction, configured\ +| | ... | with 2 thread, 2 phy core, 1 receive queue per NIC port. +| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 40GE\ +| | ... | linerate, step 100kpps and loss tolerance of 0.5%. +| | ... +| | [Tags] | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH +| | ... +| | ${n_tunnels}= | Set Variable | ${1} +| | ${framesize}= | Set Variable | ${64} +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Set Variable | ${s_18.75Mpps} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${encr_alg}= | Crypto Alg AES GCM 128 +| | ${auth_alg}= | Integ Alg AES GCM 128 +| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo +| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Add Cryptodev to all DUTs | ${2} +| | And Apply startup configuration on all VPP DUTs +| | And IPsec initialized in a 3-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${laddr_ip4} +| | ... | ${raddr_ip4} | ${addr_range} +| | Then Find PDR using binary search and pps | ${framesize} +| | ... | ${binary_min} | ${binary_max} | 3-node-IPv4-dst-${n_tunnels} +| | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} + +| tc15-64B-2t2c-ethip4ipsecscale1000ip4-ip4base-interfaces-aes-gcm-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUTs run 1000 IPsec tunnels AES GCM in each direction,\ +| | ... | configured with 2 thread, 2 phy core, 1 receive queue per NIC port. +| | ... | [Ver] Find NDR for 64 Byte frames\ +| | ... | using binary search start at 40GE linerate, step 100kpps. +| | ... +| | [Tags] | 2T2C | MTHREAD | NDRDISC +| | ... +| | ${n_tunnels}= | Set Variable | ${1000} +| | ${framesize}= | Set Variable | ${64} +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Set Variable | ${s_18.75Mpps} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${encr_alg}= | Crypto Alg AES GCM 128 +| | ${auth_alg}= | Integ Alg AES GCM 128 +| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo +| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Add Cryptodev to all DUTs | ${2} +| | And Apply startup configuration on all VPP DUTs +| | And IPsec initialized in a 3-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${laddr_ip4} +| | ... | ${raddr_ip4} | ${addr_range} +| | Then Find NDR using binary search and pps | ${framesize} +| | ... | ${binary_min} | ${binary_max} | 3-node-IPv4-dst-${n_tunnels} +| | ... | ${min_rate} | ${max_rate} | ${threshold} + +| tc16-64B-2t2c-ethip4ipsecscale1000ip4-ip4base-interfaces-aes-gcm-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUTs run 1000 IPsec tunnels AES GCM in each direction,\ +| | ... | configured with 2 thread, 2 phy core, 1 receive queue per NIC port. +| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 40GE\ +| | ... | linerate, step 100kpps and loss tolerance of 0.5%. +| | ... +| | [Tags] | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH +| | ... +| | ${n_tunnels}= | Set Variable | ${1000} +| | ${framesize}= | Set Variable | ${64} +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Set Variable | ${s_18.75Mpps} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${encr_alg}= | Crypto Alg AES GCM 128 +| | ${auth_alg}= | Integ Alg AES GCM 128 +| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo +| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Add Cryptodev to all DUTs | ${2} +| | And Apply startup configuration on all VPP DUTs +| | And IPsec initialized in a 3-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${n_tunnels} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${laddr_ip4} +| | ... | ${raddr_ip4} | ${addr_range} +| | Then Find PDR using binary search and pps | ${framesize} +| | ... | ${binary_min} | ${binary_max} | 3-node-IPv4-dst-${n_tunnels} +| | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} |