1 files changed, 62 insertions, 62 deletions

diff --git a/tests/perf/40ge2p1xl710-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrpdrdisc.robot b/tests/perf/40ge2p1xl710-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrpdrdisc.robot
index 35b38258cb..e047a6e8af 100644
--- a/tests/perf/40ge2p1xl710-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrpdrdisc.robot
+++ b/tests/perf/40ge2p1xl710-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrpdrdisc.robot
@@ -22,13 +22,13 @@
 | ... | NIC_Intel-XL710
 | ...
 | Suite Setup | Run Keywords
-| ... | 3-node Performance Suite Setup with DUT's NIC model | L3 | Intel-XL710
-| ... | AND | Verify Crypto Device On All DUTs | force_init=${True}
-| ... | AND | Verify Kernel Module On All DUTs | igb_uio | force_load=${True}
-| Suite Teardown | 3-node Performance Suite Teardown
+| ... | Set up 3-node performance topology with DUT's NIC model | L3 | Intel-XL710
+| ... | AND | Configure crypto device on all DUTs | force_init=${True}
+| ... | AND | Configure kernel module on all DUTs | igb_uio | force_load=${True}
+| Suite Teardown | Tear down 3-node performance topology
 | ...
-| Test Setup | Performance test setup
-| Test Teardown | Performance test teardown | ${min_rate}pps | ${framesize}
+| Test Setup | Set up performance test
+| Test Teardown | Tear down performance discovery test | ${min_rate}pps | ${framesize}
 | ... | ${traffic_profile}
 | ...
 | Documentation | *IPv4 IPsec transport mode performance test suite.*
@@ -89,13 +89,13 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${encr_alg}= | Crypto Alg AES CBC 128
 | | ${auth_alg}= | Integ Alg SHA1 96
-| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg}
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Add Cryptodev to all DUTs | ${1}
+| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg}
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
+| | And Add cryptodev to all DUTs | ${1}
 | | And Apply startup configuration on all VPP DUTs
-| | When Lisp GPE IPv4 over IPsec initialized in a 3-node circular topology
+| | When Initialize LISP GPE IPv4 over IPsec in 3-node circular topology
 | | ... | ${encr_alg} | ${auth_alg}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
@@ -119,13 +119,13 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${encr_alg}= | Crypto Alg AES CBC 128
 | | ${auth_alg}= | Integ Alg SHA1 96
-| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg}
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Add Cryptodev to all DUTs | ${1}
+| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg}
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
+| | And Add cryptodev to all DUTs | ${1}
 | | And Apply startup configuration on all VPP DUTs
-| | When Lisp GPE IPv4 over IPsec initialized in a 3-node circular topology
+| | When Initialize LISP GPE IPv4 over IPsec in 3-node circular topology
 | | ... | ${encr_alg} | ${auth_alg}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
@@ -150,12 +150,12 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${encr_alg}= | Crypto Alg AES CBC 128
 | | ${auth_alg}= | Integ Alg SHA1 96
-| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg}
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add Cryptodev to all DUTs | ${1}
+| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg}
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add cryptodev to all DUTs | ${1}
 | | And Apply startup configuration on all VPP DUTs
-| | When Lisp GPE IPv4 over IPsec initialized in a 3-node circular topology
+| | When Initialize LISP GPE IPv4 over IPsec in 3-node circular topology
 | | ... | ${encr_alg} | ${auth_alg}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
@@ -179,12 +179,12 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${encr_alg}= | Crypto Alg AES CBC 128
 | | ${auth_alg}= | Integ Alg SHA1 96
-| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg}
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add Cryptodev to all DUTs | ${1}
+| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg}
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add cryptodev to all DUTs | ${1}
 | | And Apply startup configuration on all VPP DUTs
-| | When Lisp GPE IPv4 over IPsec initialized in a 3-node circular topology
+| | When Initialize LISP GPE IPv4 over IPsec in 3-node circular topology
 | | ... | ${encr_alg} | ${auth_alg}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
@@ -210,12 +210,12 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${encr_alg}= | Crypto Alg AES CBC 128
 | | ${auth_alg}= | Integ Alg SHA1 96
-| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg}
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add Cryptodev to all DUTs | ${1}
+| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg}
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add cryptodev to all DUTs | ${1}
 | | And Apply startup configuration on all VPP DUTs
-| | When Lisp GPE IPv4 over IPsec initialized in a 3-node circular topology
+| | When Initialize LISP GPE IPv4 over IPsec in 3-node circular topology
 | | ... | ${encr_alg} | ${auth_alg}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
@@ -240,12 +240,12 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${encr_alg}= | Crypto Alg AES CBC 128
 | | ${auth_alg}= | Integ Alg SHA1 96
-| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg}
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add Cryptodev to all DUTs | ${1}
+| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg}
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add cryptodev to all DUTs | ${1}
 | | And Apply startup configuration on all VPP DUTs
-| | When Lisp GPE IPv4 over IPsec initialized in a 3-node circular topology
+| | When Initialize LISP GPE IPv4 over IPsec in 3-node circular topology
 | | ... | ${encr_alg} | ${auth_alg}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
@@ -270,13 +270,13 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${encr_alg}= | Crypto Alg AES CBC 128
 | | ${auth_alg}= | Integ Alg SHA1 96
-| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg}
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Add Cryptodev to all DUTs | ${2}
+| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg}
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
+| | And Add cryptodev to all DUTs | ${2}
 | | And Apply startup configuration on all VPP DUTs
-| | When Lisp GPE IPv4 over IPsec initialized in a 3-node circular topology
+| | When Initialize LISP GPE IPv4 over IPsec in 3-node circular topology
 | | ... | ${encr_alg} | ${auth_alg}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
@@ -300,13 +300,13 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${encr_alg}= | Crypto Alg AES CBC 128
 | | ${auth_alg}= | Integ Alg SHA1 96
-| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg}
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Add Cryptodev to all DUTs | ${2}
+| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg}
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
+| | And Add cryptodev to all DUTs | ${2}
 | | And Apply startup configuration on all VPP DUTs
-| | When Lisp GPE IPv4 over IPsec initialized in a 3-node circular topology
+| | When Initialize LISP GPE IPv4 over IPsec in 3-node circular topology
 | | ... | ${encr_alg} | ${auth_alg}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
@@ -331,13 +331,13 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${encr_alg}= | Crypto Alg AES CBC 128
 | | ${auth_alg}= | Integ Alg SHA1 96
-| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg}
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Add Cryptodev to all DUTs | ${4}
+| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
+| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg}
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
+| | And Add cryptodev to all DUTs | ${4}
 | | And Apply startup configuration on all VPP DUTs
-| | When Lisp GPE IPv4 over IPsec initialized in a 3-node circular topology
+| | When Initialize LISP GPE IPv4 over IPsec in 3-node circular topology
 | | ... | ${encr_alg} | ${auth_alg}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
@@ -361,13 +361,13 @@
 | | ${threshold}= | Set Variable | ${min_rate}
 | | ${encr_alg}= | Crypto Alg AES CBC 128
 | | ${auth_alg}= | Integ Alg SHA1 96
-| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg}
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
-| | And Add Cryptodev to all DUTs | ${4}
+| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
+| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg}
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
+| | And Add cryptodev to all DUTs | ${4}
 | | And Apply startup configuration on all VPP DUTs
-| | When Lisp GPE IPv4 over IPsec initialized in a 3-node circular topology
+| | When Initialize LISP GPE IPv4 over IPsec in 3-node circular topology
 | | ... | ${encr_alg} | ${auth_alg}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}