diff options
Diffstat (limited to 'tests/perf/40ge2p1xl710-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrpdrdisc.robot')
| -rw-r--r-- | tests/perf/40ge2p1xl710-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrpdrdisc.robot | 363 |
1 files changed, 363 insertions, 0 deletions
diff --git a/tests/perf/40ge2p1xl710-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrpdrdisc.robot b/tests/perf/40ge2p1xl710-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrpdrdisc.robot new file mode 100644 index 0000000000..55b7599738 --- /dev/null +++ b/tests/perf/40ge2p1xl710-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrpdrdisc.robot @@ -0,0 +1,363 @@ +# Copyright (c) 2017 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance.robot +| Resource | resources/libraries/robot/ipsec.robot +| Resource | resources/libraries/robot/lisp/lispgpe.robot +| ... +| Variables | resources/test_data/lisp/performance/lisp_static_adjacency.py +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC | IP4FWD +| ... | LISPGPE | IPSEC | IPSECHW | IPSECTRAN | ENCAP | IP4UNRLAY | IP4OVRLAY +| ... | NIC_Intel-XL710 +| ... +| Suite Setup | Run Keywords +| ... | 3-node Performance Suite Setup with DUT's NIC model | L3 | Intel-XL710 +| ... | AND | Verify Crypto Device On All DUTs | force_init=${True} +| ... | AND | Verify Kernel Module On All DUTs | igb_uio | force_load=${True} +| Suite Teardown | 3-node Performance Suite Teardown +| ... +| Test Setup | Performance test setup +| Test Teardown | Performance test teardown | ${min_rate}pps | ${framesize} +| ... | 3-node-IPv4 +| ... +| Documentation | *IPv4 IPsec transport mode performance test suite.* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,\ +| ... | Eth-IPv4-IPSec-LISPGPE-IPv4 on DUT1-DUT2 +| ... | *[Cfg] DUT configuration:* Each DUT is configured with LISP and IPsec\ +| ... | in each direction. IPsec is in transport mode. DUTs get IPv4 traffic\ +| ... | from TG, encrypt it and send to another DUT, where packets are\ +| ... | decrypted and sent back to TG. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in number\ +| ... | of packets transmitted. NDR is discovered for different\ +| ... | number of IPsec tunnels using binary search algorithms with configured\ +| ... | starting rate and final step that determines throughput measurement\ +| ... | resolution. Test packets are generated by TG on\ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ +| ... | (flow-group per direction, number of flows per flow-group equals to\ +| ... | number of IPSec tunnels) with all packets\ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and\ +| ... | static payload. MAC addresses are matching MAC addresses of the TG\ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address)\ +| ... | field is applied to both streams. +| ... | *[Ref] Applicable standard specifications:* RFC6830, RFC4303 and\ +| ... | RFC2544. + +*** Variables *** +# XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps +| ${s_24.5G} | ${24500000000} +# XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps +| ${s_18.75Mpps} | ${18750000} +| ${dut2_spi}= | ${1000} +| ${dut1_spi}= | ${1001} +| ${ESP_PROTO}= | ${50} +| ${ipsec_overhead}= | ${54} + +*** Test Cases *** +| tc01-64B-1t1c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrdisc +| | [Documentation] +| | ... | [Cfg] Each DUT is configured with LISP and IPsec in each direction.\ +| | ... | IPsec is in transport mode. DUTs are configured with 1 thread, 1 phy\ +| | ... | core, 1 receive queue per NIC port. +| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 40GE\ +| | ... | linerate, step 100kpps. +| | ... +| | [Tags] | 1T1C | STHREAD | NDRDISC +| | ... +| | ${framesize}= | Set Variable | ${64} +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Set Variable | ${s_18.75Mpps} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo +| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Add Cryptodev to all DUTs | ${1} +| | And Apply startup configuration on all VPP DUTs +| | When Lisp GPE IPv4 over IPsec initialized in a 3-node circular topology +| | ... | ${encr_alg} | ${auth_alg} +| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv4 | ${min_rate} | ${max_rate} | ${threshold} + +| tc02-64B-1t1c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-pdrdisc +| | [Documentation] +| | ... | [Cfg] Each DUT is configured with LISP and IPsec in each direction.\ +| | ... | IPsec is in transport mode. DUTs are configured with 1 thread, 1 phy\ +| | ... | core, 1 receive queue per NIC port. +| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 40GE\ +| | ... | linerate, step 100kpps, LT=0.5%. +| | ... +| | [Tags] | 1T1C | STHREAD | PDRDISC | SKIP_PATCH +| | ... +| | ${framesize}= | Set Variable | ${64} +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Set Variable | ${s_18.75Mpps} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo +| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Add Cryptodev to all DUTs | ${1} +| | And Apply startup configuration on all VPP DUTs +| | When Lisp GPE IPv4 over IPsec initialized in a 3-node circular topology +| | ... | ${encr_alg} | ${auth_alg} +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv4 | ${min_rate} | ${max_rate} | ${threshold} +| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} + +| tc03-1518B-1t1c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrdisc +| | [Documentation] +| | ... | [Cfg] Each DUT is configured with LISP and IPsec in each direction.\ +| | ... | IPsec is in transport mode. DUTs are configured with 1 thread, 1 phy\ +| | ... | core, 1 receive queue per NIC port. +| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 40GE\ +| | ... | linerate, step 100kpps. +| | ... +| | [Tags] | 1T1C | STHREAD | NDRDISC +| | ... +| | ${framesize}= | Set Variable | ${1518} +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Calculate pps | ${s_24.5G} | ${framesize + ${ipsec_overhead}} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo +| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add Cryptodev to all DUTs | ${1} +| | And Apply startup configuration on all VPP DUTs +| | When Lisp GPE IPv4 over IPsec initialized in a 3-node circular topology +| | ... | ${encr_alg} | ${auth_alg} +| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv4 | ${min_rate} | ${max_rate} | ${threshold} + +| tc04-1518B-1t1c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-pdrdisc +| | [Documentation] +| | ... | [Cfg] Each DUT is configured with LISP and IPsec in each direction.\ +| | ... | IPsec is in transport mode. DUTs are configured with 1 thread, 1 phy\ +| | ... | core, 1 receive queue per NIC port. +| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 40GE\ +| | ... | linerate, step 100kpps, LT=0.5%. +| | ... +| | [Tags] | 1T1C | STHREAD | PDRDISC | SKIP_PATCH +| | ... +| | ${framesize}= | Set Variable | ${1518} +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Calculate pps | ${s_24.5G} | ${framesize + ${ipsec_overhead}} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo +| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add Cryptodev to all DUTs | ${1} +| | And Apply startup configuration on all VPP DUTs +| | When Lisp GPE IPv4 over IPsec initialized in a 3-node circular topology +| | ... | ${encr_alg} | ${auth_alg} +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv4 | ${min_rate} | ${max_rate} | ${threshold} +| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} + +| tc05-IMIX-1t1c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrdisc +| | [Documentation] +| | ... | [Cfg] Each DUT is configured with LISP and IPsec in each direction.\ +| | ... | IPsec is in transport mode. DUTs are configured with 1 thread, 1 phy\ +| | ... | core, 1 receive queue per NIC port. +| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 40GE\ +| | ... | linerate, step 100kpps. +| | ... +| | [Tags] | 1T1C | STHREAD | NDRDISC +| | ... +| | ${framesize}= | Set Variable | IMIX_v4_1 +| | ${imix_size}= | Get Frame Size | ${framesize} +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Calculate pps | ${s_24.5G} | ${imix_size} + ${ipsec_overhead} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo +| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add Cryptodev to all DUTs | ${1} +| | And Apply startup configuration on all VPP DUTs +| | When Lisp GPE IPv4 over IPsec initialized in a 3-node circular topology +| | ... | ${encr_alg} | ${auth_alg} +| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv4 | ${min_rate} | ${max_rate} | ${threshold} + +| tc06-IMIX-1t1c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-pdrdisc +| | [Documentation] +| | ... | [Cfg] Each DUT is configured with LISP and IPsec in each direction.\ +| | ... | IPsec is in transport mode. DUTs are configured with 1 thread, 1 phy\ +| | ... | core, 1 receive queue per NIC port. +| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 40GE\ +| | ... | linerate, step 100kpps, LT=0.5%. +| | ... +| | [Tags] | 1T1C | STHREAD | PDRDISC | SKIP_PATCH +| | ... +| | ${framesize}= | Set Variable | IMIX_v4_1 +| | ${imix_size}= | Get Frame Size | ${framesize} +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Calculate pps | ${s_24.5G} | ${imix_size} + ${ipsec_overhead} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo +| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add Cryptodev to all DUTs | ${1} +| | And Apply startup configuration on all VPP DUTs +| | When Lisp GPE IPv4 over IPsec initialized in a 3-node circular topology +| | ... | ${encr_alg} | ${auth_alg} +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv4 | ${min_rate} | ${max_rate} | ${threshold} +| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} + +| tc07-64B-2t2c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrdisc +| | [Documentation] +| | ... | [Cfg] Each DUT is configured with LISP and IPsec in each direction.\ +| | ... | IPsec is in transport mode. DUTs are configured with 2 threads, 2 phy\ +| | ... | cores, 1 receive queue per NIC port. +| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 40GE\ +| | ... | linerate, step 100kpps. +| | ... +| | [Tags] | 2T2C | MTHREAD | NDRDISC +| | ... +| | ${framesize}= | Set Variable | ${64} +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Set Variable | ${s_18.75Mpps} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo +| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Add Cryptodev to all DUTs | ${2} +| | And Apply startup configuration on all VPP DUTs +| | When Lisp GPE IPv4 over IPsec initialized in a 3-node circular topology +| | ... | ${encr_alg} | ${auth_alg} +| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv4 | ${min_rate} | ${max_rate} | ${threshold} + +| tc08-64B-2t2c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-pdrdisc +| | [Documentation] +| | ... | [Cfg] Each DUT is configured with LISP and IPsec in each direction.\ +| | ... | IPsec is in transport mode. DUTs are configured with 2 threads, 2 phy\ +| | ... | cores, 1 receive queue per NIC port. +| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 40GE\ +| | ... | linerate, step 100kpps, LT=0.5%. +| | ... +| | [Tags] | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH +| | ... +| | ${framesize}= | Set Variable | ${64} +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Set Variable | ${s_18.75Mpps} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo +| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Add Cryptodev to all DUTs | ${2} +| | And Apply startup configuration on all VPP DUTs +| | When Lisp GPE IPv4 over IPsec initialized in a 3-node circular topology +| | ... | ${encr_alg} | ${auth_alg} +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv4 | ${min_rate} | ${max_rate} | ${threshold} +| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} + +| tc13-64B-4t4c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrdisc +| | [Documentation] +| | ... | [Cfg] Each DUT is configured with LISP and IPsec in each direction.\ +| | ... | IPsec is in transport mode. DUTs are configured with 4 threads, 4 phy\ +| | ... | cores, 2 receive queue per NIC port. +| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 40GE\ +| | ... | linerate, step 100kpps. +| | ... +| | [Tags] | 4T4C | MTHREAD | NDRDISC +| | ... +| | ${framesize}= | Set Variable | ${64} +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Set Variable | ${s_18.75Mpps} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo +| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Add Cryptodev to all DUTs | ${4} +| | And Apply startup configuration on all VPP DUTs +| | When Lisp GPE IPv4 over IPsec initialized in a 3-node circular topology +| | ... | ${encr_alg} | ${auth_alg} +| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv4 | ${min_rate} | ${max_rate} | ${threshold} + +| tc14-64B-4t4c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-pdrdisc +| | [Documentation] +| | ... | [Cfg] Each DUT is configured with LISP and IPsec in each direction.\ +| | ... | IPsec is in transport mode. DUTs are configured with 4 threads, 4 phy\ +| | ... | cores, 2 receive queue per NIC port. +| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 40GE\ +| | ... | linerate, step 100kpps, LT=0.5%. +| | ... +| | [Tags] | 4T4C | MTHREAD | PDRDISC | SKIP_PATCH +| | ... +| | ${framesize}= | Set Variable | ${64} +| | ${min_rate}= | Set Variable | ${10000} +| | ${max_rate}= | Set Variable | ${s_18.75Mpps} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo +| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Add Cryptodev to all DUTs | ${4} +| | And Apply startup configuration on all VPP DUTs +| | When Lisp GPE IPv4 over IPsec initialized in a 3-node circular topology +| | ... | ${encr_alg} | ${auth_alg} +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv4 | ${min_rate} | ${max_rate} | ${threshold} +| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} |