aboutsummaryrefslogtreecommitdiffstats
path: root/tests/perf/Short_Lisp_Intel-X520-DA2.robot
diff options
context:
space:
mode:
Diffstat (limited to 'tests/perf/Short_Lisp_Intel-X520-DA2.robot')
-rw-r--r--tests/perf/Short_Lisp_Intel-X520-DA2.robot943
1 files changed, 943 insertions, 0 deletions
diff --git a/tests/perf/Short_Lisp_Intel-X520-DA2.robot b/tests/perf/Short_Lisp_Intel-X520-DA2.robot
new file mode 100644
index 0000000000..6ecfe59ddc
--- /dev/null
+++ b/tests/perf/Short_Lisp_Intel-X520-DA2.robot
@@ -0,0 +1,943 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/performance.robot
+| Resource | resources/libraries/robot/lisp/lisp_static_adjacency.robot
+| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT1']}
+| ... | WITH NAME | dut1_v4
+| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT2']}
+| ... | WITH NAME | dut2_v4
+# import additional Lisp settings from resource file
+| Variables | resources/test_data/lisp/performance/lisp_static_adjacency.py
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | PERFTEST_SHORT
+| ... | NIC_Intel-X520-DA2
+| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
+| ... | L3 | Intel-X520-DA2
+| Suite Teardown | 3-node Performance Suite Teardown
+| Test Setup | Setup all DUTs before test
+| Test Teardown | Run Keyword | Remove startup configuration of VPP from all DUTs
+| Documentation | *Reference NDR throughput Lisp tunnel verify test cases*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-LISP-IPv4-ICMPv4 on DUT1-DUT2,
+| ... | Eth-IPv4-ICMPv4 on TG-DUTn for IPv4 routing over LISPoIPv4 tunnel;
+| ... | Eth-IPv6-LISP-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUTn for
+| ... | IPv6 routing over LISPoIPv6 tunnel; Eth-IPv6-LISP-IPv4-ICMPv4 on
+| ... | DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUTn for IPv4 routing over LISPoIPv6
+| ... | tunnel; Eth-IPv4-LISP-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on
+| ... | TG-DUTn for IPv6 routing over LISPoIPv4 tunnel.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4 (IPv6)
+| ... | routing and static routes. LISPoIPv4 (oIPv6) tunnel is configured
+| ... | between DUT1 and DUT2. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic
+| ... | by Intel.
+| ... | *[Ver] TG verification:* In short performance tests, TG verifies
+| ... | DUTs' throughput at ref-NDR (reference Non Drop Rate) with zero packet
+| ... | loss tolerance. Ref-NDR value is periodically updated acording to
+| ... | formula: ref-NDR = 0.9x NDR, where NDR is found in RFC2544 long
+| ... | performance tests for the same DUT confiiguration. Test packets are
+| ... | generated by TG on links to DUTs. TG traffic profile contains two L3
+| ... | flow-groups (flow-group per direction, 253 flows per flow-group) with
+| ... | all packets containing Ethernet header, IPv4 header or IPv6 header with
+| ... | IP protocol=61 and generated payload.
+| ... | *[Ref] Applicable standard specifications:* RFC2544.
+
+*** Test Cases ***
+| TC01: Verify 64B ref-NDR at 2x 1.9Mpps - DUT IPv4 - 1thread 1core 1rxq
+| | [Documentation]
+| | ... | [Cfg] DUT runs LISP tunnel config with 1 thread, 1 phy core, \
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Verify ref-NDR for 64 Byte frames using single trial throughput
+| | ... | test.
+| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | NDR | LISP_IPv4
+| | ${framesize}= | Set Variable | 64
+| | ${duration}= | Set Variable | 10
+| | ${rate}= | Set Variable | 1.9mpps
+| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When Lisp IPv4 forwarding initialized in a 3-node circular topology
+| | ... | ${dut1_to_dut2_ip4} | ${dut1_to_tg_ip4} | ${dut2_to_dut1_ip4}
+| | ... | ${dut2_to_tg_ip4} | ${prefix4}
+| | And Set up Lisp topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid}
+| | ... | ${dut1_ip4_static_adjacency} | ${dut2_ip4_static_adjacency}
+| | Then Traffic should pass with no loss | ${duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
+
+| TC02: Verify 1480B ref-NDR at 2x 740kpps - DUT IPv4 - 1thread 1core 1rxq
+| | [Documentation]
+| | ... | [Cfg] DUT runs LISP tunnel config with 1 thread, 1 phy core, \
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Verify ref-NDR for 1480 Byte frames using single trial
+| | ... | throughput test.
+| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | NDR | LISP_IPv4
+| | ${framesize}= | Set Variable | 1480
+| | ${duration}= | Set Variable | 10
+| | ${rate}= | Set Variable | 740000pps
+| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When Lisp IPv4 forwarding initialized in a 3-node circular topology
+| | ... | ${dut1_to_dut2_ip4} | ${dut1_to_tg_ip4} | ${dut2_to_dut1_ip4}
+| | ... | ${dut2_to_tg_ip4} | ${prefix4}
+| | And Set up Lisp topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid}
+| | ... | ${dut1_ip4_static_adjacency} | ${dut2_ip4_static_adjacency}
+| | Then Traffic should pass with no loss | ${duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
+
+| TC03: Verify 9000B ref-NDR at 2x 120kpps - DUT IPv4 - 1thread 1core 1rxq
+| | [Documentation]
+| | ... | [Cfg] DUT runs LISP tunnel config with 1 thread, 1 phy core, \
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Verify ref-NDR for 9000 Byte frames using single trial
+| | ... | throughput test.
+| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | NDR | LISP_IPv4
+| | ${framesize}= | Set Variable | 9000
+| | ${duration}= | Set Variable | 10
+| | ${rate}= | Set Variable | 120000pps
+| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | When Lisp IPv4 forwarding initialized in a 3-node circular topology
+| | ... | ${dut1_to_dut2_ip4} | ${dut1_to_tg_ip4} | ${dut2_to_dut1_ip4}
+| | ... | ${dut2_to_tg_ip4} | ${prefix4}
+| | And Set up Lisp topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid}
+| | ... | ${dut1_ip4_static_adjacency} | ${dut2_ip4_static_adjacency}
+| | Then Traffic should pass with no loss | ${duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
+
+| TC04: Verify 64B ref-NDR at 2x 3.6Mpps - DUT IPv4 - 2thread 2core 1rxq
+| | [Documentation]
+| | ... | [Cfg] DUT runs LISP tunnel config with 2 threads, 2 phy cores, \
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Verify ref-NDR for 64 Byte frames using single trial
+| | ... | throughput test.
+| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | NDR | LISP_IPv4
+| | ${framesize}= | Set Variable | 64
+| | ${duration}= | Set Variable | 10
+| | ${rate}= | Set Variable | 3.6mpps
+| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When Lisp IPv4 forwarding initialized in a 3-node circular topology
+| | ... | ${dut1_to_dut2_ip4} | ${dut1_to_tg_ip4} | ${dut2_to_dut1_ip4}
+| | ... | ${dut2_to_tg_ip4} | ${prefix4}
+| | And Set up Lisp topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid}
+| | ... | ${dut1_ip4_static_adjacency} | ${dut2_ip4_static_adjacency}
+| | Then Traffic should pass with no loss | ${duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
+
+| TC05: Verify 1480B ref-NDR at 2x 740kpps - DUT IPv4 - 2thread 2core 1rxq
+| | [Documentation]
+| | ... | [Cfg] DUT runs LISP tunnel config with 2 threads, 2 phy cores, \
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Verify ref-NDR for 1480 Byte frames using single trial
+| | ... | throughput test.
+| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | NDR | LISP_IPv4
+| | ${framesize}= | Set Variable | 1480
+| | ${duration}= | Set Variable | 10
+| | ${rate}= | Set Variable | 740000pps
+| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When Lisp IPv4 forwarding initialized in a 3-node circular topology
+| | ... | ${dut1_to_dut2_ip4} | ${dut1_to_tg_ip4} | ${dut2_to_dut1_ip4}
+| | ... | ${dut2_to_tg_ip4} | ${prefix4}
+| | And Set up Lisp topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid}
+| | ... | ${dut1_ip4_static_adjacency} | ${dut2_ip4_static_adjacency}
+| | Then Traffic should pass with no loss | ${duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
+
+| TC06: Verify 9000B ref-NDR at 2x 120kpps - DUT IPv4 - 2thread 2core 1rxq
+| | [Documentation]
+| | ... | [Cfg] DUT runs LISP tunnel config with 2 threads, 2 phy cores, \
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Verify ref-NDR for 9000 Byte frames using single trial
+| | ... | throughput test.
+| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | NDR | LISP_IPv4
+| | ${framesize}= | Set Variable | 9000
+| | ${duration}= | Set Variable | 10
+| | ${rate}= | Set Variable | 120000pps
+| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | When Lisp IPv4 forwarding initialized in a 3-node circular topology
+| | ... | ${dut1_to_dut2_ip4} | ${dut1_to_tg_ip4} | ${dut2_to_dut1_ip4}
+| | ... | ${dut2_to_tg_ip4} | ${prefix4}
+| | And Set up Lisp topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid}
+| | ... | ${dut1_ip4_static_adjacency} | ${dut2_ip4_static_adjacency}
+| | Then Traffic should pass with no loss | ${duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
+
+| TC07: Verify 64B ref-NDR at 2x 3.5Mpps - DUT IPv4 - 4thread 4core 2rxq
+| | [Documentation]
+| | ... | [Cfg] DUT runs LISP tunnel config with 4 threads, 4 phy cores, \
+| | ... | 2 receive queues per NIC port.
+| | ... | [Ver] Verify ref-NDR for 64 Byte frames using single trial
+| | ... | throughput test.
+| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | NDR | LISP_IPv4
+| | ${framesize}= | Set Variable | 64
+| | ${duration}= | Set Variable | 10
+| | ${rate}= | Set Variable | 3.5mpps
+| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When Lisp IPv4 forwarding initialized in a 3-node circular topology
+| | ... | ${dut1_to_dut2_ip4} | ${dut1_to_tg_ip4} | ${dut2_to_dut1_ip4}
+| | ... | ${dut2_to_tg_ip4} | ${prefix4}
+| | And Set up Lisp topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid}
+| | ... | ${dut1_ip4_static_adjacency} | ${dut2_ip4_static_adjacency}
+| | Then Traffic should pass with no loss | ${duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
+
+| TC08: Verify 1480B ref-NDR at 2x 740kpps - DUT IPv4 - 4thread 4core 2rxq
+| | [Documentation]
+| | ... | [Cfg] DUT runs LISP tunnel config with 4 threads, 4 phy cores, \
+| | ... | 2 receive queues per NIC port.
+| | ... | [Ver] Verify ref-NDR for 1480 Byte frames using single trial
+| | ... | throughput test.
+| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | NDR | LISP_IPv4
+| | ${framesize}= | Set Variable | 1480
+| | ${duration}= | Set Variable | 10
+| | ${rate}= | Set Variable | 740000pps
+| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When Lisp IPv4 forwarding initialized in a 3-node circular topology
+| | ... | ${dut1_to_dut2_ip4} | ${dut1_to_tg_ip4} | ${dut2_to_dut1_ip4}
+| | ... | ${dut2_to_tg_ip4} | ${prefix4}
+| | And Set up Lisp topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid}
+| | ... | ${dut1_ip4_static_adjacency} | ${dut2_ip4_static_adjacency}
+| | Then Traffic should pass with no loss | ${duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
+
+| TC09: Verify 9000B ref-NDR at 2x 120kpps - DUT IPv4 - 4thread 4core 2rxq
+| | [Documentation]
+| | ... | [Cfg] DUT runs LISP tunnel config with 4 threads, 4 phy cores, \
+| | ... | 2 receive queues per NIC port.
+| | ... | [Ver] Verify ref-NDR for 9000 Byte frames using single trial
+| | ... | throughput test.
+| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | NDR | LISP_IPv4
+| | ${framesize}= | Set Variable | 9000
+| | ${duration}= | Set Variable | 10
+| | ${rate}= | Set Variable | 120000pps
+| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | When Lisp IPv4 forwarding initialized in a 3-node circular topology
+| | ... | ${dut1_to_dut2_ip4} | ${dut1_to_tg_ip4} | ${dut2_to_dut1_ip4}
+| | ... | ${dut2_to_tg_ip4} | ${prefix4}
+| | And Set up Lisp topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid}
+| | ... | ${dut1_ip4_static_adjacency} | ${dut2_ip4_static_adjacency}
+| | Then Traffic should pass with no loss | ${duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
+
+| TC10: Verify 78B ref-NDR at 2x 1.56Mpps - DUT IPv6 - 1thread 1core 1rxq
+| | [Documentation]
+| | ... | [Cfg] DUT runs LISP tunnel config with 1 thread, 1 phy core, \
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Verify ref-NDR for 78 Byte frames using single trial
+| | ... | throughput test.
+| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | NDR | LISP_IPv6
+| | ${framesize}= | Set Variable | 78
+| | ${duration}= | Set Variable | 10
+| | ${rate}= | Set Variable | 1.56mpps
+| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When Lisp IPv6 forwarding initialized in a 3-node circular topology
+| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6}
+| | ... | ${dut2_to_tg_ip6} | ${prefix6}
+| | And Set up Lisp topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid}
+| | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency}
+| | Then Traffic should pass with no loss | ${duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
+
+| TC11: Verify 1460B ref-NDR at 2x 740kpps - DUT IPv6 - 1thread 1core 1rxq
+| | [Documentation]
+| | ... | [Cfg] DUT runs LISP tunnel config with 1 thread, 1 phy core, \
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Verify ref-NDR for 1460 Byte frames using single trial
+| | ... | throughput test.
+| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | NDR | LISP_IPv6
+| | ${framesize}= | Set Variable | 1460
+| | ${duration}= | Set Variable | 10
+| | ${rate}= | Set Variable | 740000pps
+| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When Lisp IPv6 forwarding initialized in a 3-node circular topology
+| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6}
+| | ... | ${dut2_to_tg_ip6} | ${prefix6}
+| | And Set up Lisp topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid}
+| | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency}
+| | Then Traffic should pass with no loss | ${duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
+
+| TC12: Verify 9000B ref-NDR at 2x 120kpps - DUT IPv6 - 1thread 1core 1rxq
+| | [Documentation]
+| | ... | [Cfg] DUT runs LISP tunnel config with 1 thread, 1 phy core, \
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Verify ref-NDR for 9000 Byte frames using single trial
+| | ... | throughput test.
+| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | NDR | LISP_IPv6
+| | ${framesize}= | Set Variable | 9000
+| | ${duration}= | Set Variable | 10
+| | ${rate}= | Set Variable | 120000pps
+| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | When Lisp IPv6 forwarding initialized in a 3-node circular topology
+| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6}
+| | ... | ${dut2_to_tg_ip6} | ${prefix6}
+| | And Set up Lisp topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid}
+| | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency}
+| | Then Traffic should pass with no loss | ${duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
+
+| TC13: Verify 78B ref-NDR at 2x 3.2Mpps - DUT IPv6 - 2thread 2core 1rxq
+| | [Documentation]
+| | ... | [Cfg] DUT runs LISP tunnel config with 2 thread, 2 phy core, \
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Verify ref-NDR for 78 Byte frames using single trial
+| | ... | throughput test.
+| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | NDR | LISP_IPv6
+| | ${framesize}= | Set Variable | 78
+| | ${duration}= | Set Variable | 10
+| | ${rate}= | Set Variable | 3.2mpps
+| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When Lisp IPv6 forwarding initialized in a 3-node circular topology
+| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6}
+| | ... | ${dut2_to_tg_ip6} | ${prefix6}
+| | And Set up Lisp topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid}
+| | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency}
+| | Then Traffic should pass with no loss | ${duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
+
+| TC14: Verify 1460B ref-NDR at 2x 740kpps - DUT IPv6 - 2thread 2core 1rxq
+| | [Documentation]
+| | ... | [Cfg] DUT runs LISP tunnel config with 2 threads, 2 phy cores, \
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Verify ref-NDR for 1460 Byte frames using single trial
+| | ... | throughput test.
+| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | NDR | LISP_IPv6
+| | ${framesize}= | Set Variable | 1460
+| | ${duration}= | Set Variable | 10
+| | ${rate}= | Set Variable | 740000pps
+| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When Lisp IPv6 forwarding initialized in a 3-node circular topology
+| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6}
+| | ... | ${dut2_to_tg_ip6} | ${prefix6}
+| | And Set up Lisp topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid}
+| | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency}
+| | Then Traffic should pass with no loss | ${duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
+
+| TC15: Verify 9000B ref-NDR at 2x 120kpps - DUT IPv6 - 2thread 2core 1rxq
+| | [Documentation]
+| | ... | [Cfg] DUT runs LISP tunnel config with 2 threads, 2 phy cores, \
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Verify ref-NDR for 9000 Byte frames using single trial
+| | ... | throughput test.
+| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | NDR | LISP_IPv6
+| | ${framesize}= | Set Variable | 9000
+| | ${duration}= | Set Variable | 10
+| | ${rate}= | Set Variable | 120000pps
+| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | When Lisp IPv6 forwarding initialized in a 3-node circular topology
+| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6}
+| | ... | ${dut2_to_tg_ip6} | ${prefix6}
+| | And Set up Lisp topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid}
+| | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency}
+| | Then Traffic should pass with no loss | ${duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
+
+| TC16: Verify 78B ref-NDR at 2x 3.2Mpps - DUT IPv6 - 4thread 4core 2rxq
+| | [Documentation]
+| | ... | [Cfg] DUT runs LISP tunnel config with 4 threads, 4 phy cores, \
+| | ... | 2 receive queues per NIC port.
+| | ... | [Ver] Verify ref-NDR for 78 Byte frames using single trial
+| | ... | throughput test.
+| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | NDR | LISP_IPv6
+| | ${framesize}= | Set Variable | 78
+| | ${duration}= | Set Variable | 10
+| | ${rate}= | Set Variable | 3.2mpps
+| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When Lisp IPv6 forwarding initialized in a 3-node circular topology
+| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6}
+| | ... | ${dut2_to_tg_ip6} | ${prefix6}
+| | And Set up Lisp topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid}
+| | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency}
+| | Then Traffic should pass with no loss | ${duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
+
+| TC17: Verify 1460B ref-NDR at 2x 740kpps - DUT IPv6 - 4thread 4core 2rxq
+| | [Documentation]
+| | ... | [Cfg] DUT runs LISP tunnel config with 4 threads, 4 phy cores, \
+| | ... | 2 receive queues per NIC port.
+| | ... | [Ver] Verify ref-NDR for 1460 Byte frames using single trial
+| | ... | throughput test.
+| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | NDR | LISP_IPv6
+| | ${framesize}= | Set Variable | 1460
+| | ${duration}= | Set Variable | 10
+| | ${rate}= | Set Variable | 740000pps
+| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When Lisp IPv6 forwarding initialized in a 3-node circular topology
+| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6}
+| | ... | ${dut2_to_tg_ip6} | ${prefix6}
+| | And Set up Lisp topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid}
+| | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency}
+| | Then Traffic should pass with no loss | ${duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
+
+| TC18: Verify 9000B ref-NDR at 2x 120kpps - DUT IPv6 - 4thread 4core 2rxq
+| | [Documentation]
+| | ... | [Cfg] DUT runs LISP tunnel config with 4 threads, 4 phy cores, \
+| | ... | 2 receive queues per NIC port.
+| | ... | [Ver] Verify ref-NDR for 9000 Byte frames using single trial
+| | ... | throughput test.
+| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | NDR | LISP_IPv6
+| | ${framesize}= | Set Variable | 9000
+| | ${duration}= | Set Variable | 10
+| | ${rate}= | Set Variable | 120000pps
+| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | When Lisp IPv6 forwarding initialized in a 3-node circular topology
+| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6}
+| | ... | ${dut2_to_tg_ip6} | ${prefix6}
+| | And Set up Lisp topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid}
+| | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency}
+| | Then Traffic should pass with no loss | ${duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
+
+| TC19: Verify 64B ref-NDR at 2x 1.53Mpps - DUT IPv4oIPv6 - 1thread 1core 1rxq
+| | [Documentation]
+| | ... | [Cfg] DUT runs LISP tunnel config with 1 thread, 1 phy core, \
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Verify ref-NDR for 64 Byte frames using single trial
+| | ... | throughput test.
+| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | NDR | LISP_IPv4oIPv6
+| | ${framesize}= | Set Variable | 64
+| | ${duration}= | Set Variable | 10
+| | ${rate}= | Set Variable | 1.53mpps
+| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When Lisp IPv4 over IPv6 forwarding initialized in a 3-node circular topology
+| | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6}
+| | ... | ${dut2_to_tg_ip4o6} | ${tg_prefix4o6} | ${dut_prefix4o6}
+| | And Set up Lisp topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip4o6_eid} | ${dut2_ip4o6_eid}
+| | ... | ${dut1_ip4o6_static_adjacency} | ${dut2_ip4o6_static_adjacency}
+| | Then Traffic should pass with no loss | ${duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
+
+| TC20: Verify 1460B ref-NDR at 2x 720kpps - DUT IPv4oIPv6 - 1thread 1core 1rxq
+| | [Documentation]
+| | ... | [Cfg] DUT runs LISP tunnel config with 1 thread, 1 phy core, \
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Verify ref-NDR for 1460 Byte frames using single trial
+| | ... | throughput test.
+| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | NDR | LISP_IPv4oIPv6
+| | ${framesize}= | Set Variable | 1460
+| | ${duration}= | Set Variable | 10
+| | ${rate}= | Set Variable | 720000pps
+| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When Lisp IPv4 over IPv6 forwarding initialized in a 3-node circular topology
+| | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6}
+| | ... | ${dut2_to_tg_ip4o6} | ${tg_prefix4o6} | ${dut_prefix4o6}
+| | And Set up Lisp topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip4o6_eid} | ${dut2_ip4o6_eid}
+| | ... | ${dut1_ip4o6_static_adjacency} | ${dut2_ip4o6_static_adjacency}
+| | Then Traffic should pass with no loss | ${duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
+
+| TC21: Verify 9000B ref-NDR at 2x 120kpps - DUT IPv4oIPv6 - 1thread 1core 1rxq
+| | [Documentation]
+| | ... | [Cfg] DUT runs LISP tunnel config with 1 thread, 1 phy core, \
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Verify ref-NDR for 9000 Byte frames using single trial
+| | ... | throughput test.
+| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | NDR | LISP_IPv4oIPv6
+| | ${framesize}= | Set Variable | 9000
+| | ${duration}= | Set Variable | 10
+| | ${rate}= | Set Variable | 120000pps
+| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | When Lisp IPv4 over IPv6 forwarding initialized in a 3-node circular topology
+| | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6}
+| | ... | ${dut2_to_tg_ip4o6} | ${tg_prefix4o6} | ${dut_prefix4o6}
+| | And Set up Lisp topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip4o6_eid} | ${dut2_ip4o6_eid}
+| | ... | ${dut1_ip4o6_static_adjacency} | ${dut2_ip4o6_static_adjacency}
+| | Then Traffic should pass with no loss | ${duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
+
+| TC22: Verify 64B ref-NDR at 2x 3.25Mpps - DUT IPv4oIPv6 - 2thread 2core 1rxq
+| | [Documentation]
+| | ... | [Cfg] DUT runs LISP tunnel config with 2 threads, 2 phy cores, \
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Verify ref-NDR for 64 Byte frames using single trial
+| | ... | throughput test.
+| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | NDR | LISP_IPv4oIPv6
+| | ${framesize}= | Set Variable | 64
+| | ${duration}= | Set Variable | 10
+| | ${rate}= | Set Variable | 3.25mpps
+| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When Lisp IPv4 over IPv6 forwarding initialized in a 3-node circular topology
+| | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6}
+| | ... | ${dut2_to_tg_ip4o6} | ${tg_prefix4o6} | ${dut_prefix4o6}
+| | And Set up Lisp topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip4o6_eid} | ${dut2_ip4o6_eid}
+| | ... | ${dut1_ip4o6_static_adjacency} | ${dut2_ip4o6_static_adjacency}
+| | Then Traffic should pass with no loss | ${duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
+
+| TC23: Verify 1460B ref-NDR at 2x 720kpps - DUT IPv4oIPv6 - 2thread 2core 1rxq
+| | [Documentation]
+| | ... | [Cfg] DUT runs LISP tunnel config with 2 threads, 2 phy cores, \
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Verify ref-NDR for 1460 Byte frames using single trial
+| | ... | throughput test.
+| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | NDR | LISP_IPv4oIPv6
+| | ${framesize}= | Set Variable | 1460
+| | ${duration}= | Set Variable | 10
+| | ${rate}= | Set Variable | 720000pps
+| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When Lisp IPv4 over IPv6 forwarding initialized in a 3-node circular topology
+| | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6}
+| | ... | ${dut2_to_tg_ip4o6} | ${tg_prefix4o6} | ${dut_prefix4o6}
+| | And Set up Lisp topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip4o6_eid} | ${dut2_ip4o6_eid}
+| | ... | ${dut1_ip4o6_static_adjacency} | ${dut2_ip4o6_static_adjacency}
+| | Then Traffic should pass with no loss | ${duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
+
+| TC24: Verify 9000B ref-NDR at 2x 120kpps - DUT IPv4oIPv6 - 2thread 2core 1rxq
+| | [Documentation]
+| | ... | [Cfg] DUT runs LISP tunnel config with 2 threads, 2 phy cores, \
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Verify ref-NDR for 9000 Byte frames using single trial
+| | ... | throughput test.
+| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | NDR | LISP_IPv4oIPv6
+| | ${framesize}= | Set Variable | 9000
+| | ${duration}= | Set Variable | 10
+| | ${rate}= | Set Variable | 120000pps
+| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | When Lisp IPv4 over IPv6 forwarding initialized in a 3-node circular topology
+| | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6}
+| | ... | ${dut2_to_tg_ip4o6} | ${tg_prefix4o6} | ${dut_prefix4o6}
+| | And Set up Lisp topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip4o6_eid} | ${dut2_ip4o6_eid}
+| | ... | ${dut1_ip4o6_static_adjacency} | ${dut2_ip4o6_static_adjacency}
+| | Then Traffic should pass with no loss | ${duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
+
+| TC25: Verify 64B ref-NDR at 2x 3.12Mpps - DUT IPv4oIPv6 - 4thread 4core 2rxq
+| | [Documentation]
+| | ... | [Cfg] DUT runs LISP tunnel config with 4 threads, 4 phy cores, \
+| | ... | 2 receive queues per NIC port.
+| | ... | [Ver] Verify ref-NDR for 64 Byte frames using single trial
+| | ... | throughput test.
+| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | NDR | LISP_IPv4oIPv6
+| | ${framesize}= | Set Variable | 64
+| | ${duration}= | Set Variable | 10
+| | ${rate}= | Set Variable | 3.12mpps
+| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When Lisp IPv4 over IPv6 forwarding initialized in a 3-node circular topology
+| | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6}
+| | ... | ${dut2_to_tg_ip4o6} | ${tg_prefix4o6} | ${dut_prefix4o6}
+| | And Set up Lisp topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip4o6_eid} | ${dut2_ip4o6_eid}
+| | ... | ${dut1_ip4o6_static_adjacency} | ${dut2_ip4o6_static_adjacency}
+| | Then Traffic should pass with no loss | ${duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
+
+| TC26: Verify 1460B ref-NDR at 2x 720kpps - DUT IPv4oIPv6 - 4thread 4core 2rxq
+| | [Documentation]
+| | ... | [Cfg] DUT runs LISP tunnel config with 4 threads, 4 phy cores, \
+| | ... | 2 receive queues per NIC port.
+| | ... | [Ver] Verify ref-NDR for 1460 Byte frames using single trial
+| | ... | throughput test.
+| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | NDR | LISP_IPv4oIPv6
+| | ${framesize}= | Set Variable | 1460
+| | ${duration}= | Set Variable | 10
+| | ${rate}= | Set Variable | 720000pps
+| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When Lisp IPv4 over IPv6 forwarding initialized in a 3-node circular topology
+| | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6}
+| | ... | ${dut2_to_tg_ip4o6} | ${tg_prefix4o6} | ${dut_prefix4o6}
+| | And Set up Lisp topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip4o6_eid} | ${dut2_ip4o6_eid}
+| | ... | ${dut1_ip4o6_static_adjacency} | ${dut2_ip4o6_static_adjacency}
+| | Then Traffic should pass with no loss | ${duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
+
+| TC27: Verify 9000B ref-NDR at 2x 120kpps - DUT IPv4oIPv6 - 4thread 4core 2rxq
+| | [Documentation]
+| | ... | [Cfg] DUT runs LISP tunnel config with 4 threads, 4 phy cores, \
+| | ... | 2 receive queues per NIC port.
+| | ... | [Ver] Verify ref-NDR for 9000 Byte frames using single trial
+| | ... | throughput test.
+| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | NDR | LISP_IPv4oIPv6
+| | ${framesize}= | Set Variable | 9000
+| | ${duration}= | Set Variable | 10
+| | ${rate}= | Set Variable | 120000pps
+| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | When Lisp IPv4 over IPv6 forwarding initialized in a 3-node circular topology
+| | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6}
+| | ... | ${dut2_to_tg_ip4o6} | ${tg_prefix4o6} | ${dut_prefix4o6}
+| | And Set up Lisp topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip4o6_eid} | ${dut2_ip4o6_eid}
+| | ... | ${dut1_ip4o6_static_adjacency} | ${dut2_ip4o6_static_adjacency}
+| | Then Traffic should pass with no loss | ${duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
+
+| TC28: Verify 78B ref-NDR at 2x 1.75Mpps - DUT IPv6oIPv4 - 1thread 1core 1rxq
+| | [Documentation]
+| | ... | [Cfg] DUT runs LISP tunnel config with 1 thread, 1 phy core, \
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Verify ref-NDR for 78 Byte frames using single trial
+| | ... | throughput test.
+| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | NDR | LISP_IPv6oIPv4
+| | ${framesize}= | Set Variable | 78
+| | ${duration}= | Set Variable | 10
+| | ${rate}= | Set Variable | 1.75mpps
+| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When Lisp IPv6 over IPv4 forwarding initialized in a 3-node circular topology
+| | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4}
+| | ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} | ${dut_prefix6o4}
+| | And Set up Lisp topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid}
+| | ... | ${dut1_ip6o4_static_adjacency} | ${dut2_ip6o4_static_adjacency}
+| | Then Traffic should pass with no loss | ${duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
+
+| TC29: Verify 1460B ref-NDR at 2x 720kpps - DUT IPv6oIPv4 - 1thread 1core 1rxq
+| | [Documentation]
+| | ... | [Cfg] DUT runs LISP tunnel config with 1 thread, 1 phy core, \
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Verify ref-NDR for 1460 Byte frames using single trial
+| | ... | throughput test.
+| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | NDR | LISP_IPv6oIPv4
+| | ${framesize}= | Set Variable | 1460
+| | ${duration}= | Set Variable | 10
+| | ${rate}= | Set Variable | 720000pps
+| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When Lisp IPv6 over IPv4 forwarding initialized in a 3-node circular topology
+| | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4}
+| | ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} | ${dut_prefix6o4}
+| | And Set up Lisp topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid}
+| | ... | ${dut1_ip6o4_static_adjacency} | ${dut2_ip6o4_static_adjacency}
+| | Then Traffic should pass with no loss | ${duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
+
+| TC30: Verify 9000B ref-NDR at 2x 120kpps - DUT IPv6oIPv4 - 1thread 1core 1rxq
+| | [Documentation]
+| | ... | [Cfg] DUT runs LISP tunnel config with 1 thread, 1 phy core, \
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Verify ref-NDR for 9000 Byte frames using single trial
+| | ... | throughput test.
+| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | NDR | LISP_IPv6oIPv4
+| | ${framesize}= | Set Variable | 9000
+| | ${duration}= | Set Variable | 10
+| | ${rate}= | Set Variable | 120000pps
+| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | When Lisp IPv6 over IPv4 forwarding initialized in a 3-node circular topology
+| | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4}
+| | ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} | ${dut_prefix6o4}
+| | And Set up Lisp topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid}
+| | ... | ${dut1_ip6o4_static_adjacency} | ${dut2_ip6o4_static_adjacency}
+| | Then Traffic should pass with no loss | ${duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
+
+| TC31: Verify 78B ref-NDR at 2x 3.42Mpps - DUT IPv6oIPv4 - 2thread 2core 1rxq
+| | [Documentation]
+| | ... | [Cfg] DUT runs LISP tunnel config with 2 threads, 2 phy cores, \
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Verify ref-NDR for 78 Byte frames using single trial
+| | ... | throughput test.
+| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | NDR | LISP_IPv6oIPv4
+| | ${framesize}= | Set Variable | 78
+| | ${duration}= | Set Variable | 10
+| | ${rate}= | Set Variable | 3.42mpps
+| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When Lisp IPv6 over IPv4 forwarding initialized in a 3-node circular topology
+| | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4}
+| | ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} | ${dut_prefix6o4}
+| | And Set up Lisp topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid}
+| | ... | ${dut1_ip6o4_static_adjacency} | ${dut2_ip6o4_static_adjacency}
+| | Then Traffic should pass with no loss | ${duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
+
+| TC32: Verify 1460B ref-NDR at 2x 720kpps - DUT IPv6oIPv4 - 2thread 2core 1rxq
+| | [Documentation]
+| | ... | [Cfg] DUT runs LISP tunnel config with 2 threads, 2 phy cores, \
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Verify ref-NDR for 1460 Byte frames using single trial
+| | ... | throughput test.
+| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | NDR | LISP_IPv6oIPv4
+| | ${framesize}= | Set Variable | 1460
+| | ${duration}= | Set Variable | 10
+| | ${rate}= | Set Variable | 720000pps
+| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When Lisp IPv6 over IPv4 forwarding initialized in a 3-node circular topology
+| | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4}
+| | ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} | ${dut_prefix6o4}
+| | And Set up Lisp topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid}
+| | ... | ${dut1_ip6o4_static_adjacency} | ${dut2_ip6o4_static_adjacency}
+| | Then Traffic should pass with no loss | ${duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
+
+| TC33: Verify 9000B ref-NDR at 2x 120kpps - DUT IPv6oIPv4 - 2thread 2core 1rxq
+| | [Documentation]
+| | ... | [Cfg] DUT runs LISP tunnel config with 2 threads, 2 phy cores, \
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Verify ref-NDR for 9000 Byte frames using single trial
+| | ... | throughput test.
+| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | NDR | LISP_IPv6oIPv4
+| | ${framesize}= | Set Variable | 9000
+| | ${duration}= | Set Variable | 10
+| | ${rate}= | Set Variable | 120000pps
+| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | When Lisp IPv6 over IPv4 forwarding initialized in a 3-node circular topology
+| | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4}
+| | ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} | ${dut_prefix6o4}
+| | And Set up Lisp topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid}
+| | ... | ${dut1_ip6o4_static_adjacency} | ${dut2_ip6o4_static_adjacency}
+| | Then Traffic should pass with no loss | ${duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
+
+| TC34: Verify 78B ref-NDR at 2x 3.42Mpps - DUT IPv6oIPv4 - 4thread 4core 2rxq
+| | [Documentation]
+| | ... | [Cfg] DUT runs LISP tunnel config with 4 threads, 4 phy cores, \
+| | ... | 2 receive queues per NIC port.
+| | ... | [Ver] Verify ref-NDR for 78 Byte frames using single trial
+| | ... | throughput test.
+| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | NDR | LISP_IPv6oIPv4
+| | ${framesize}= | Set Variable | 78
+| | ${duration}= | Set Variable | 10
+| | ${rate}= | Set Variable | 3.42mpps
+| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When Lisp IPv6 over IPv4 forwarding initialized in a 3-node circular topology
+| | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4}
+| | ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} | ${dut_prefix6o4}
+| | And Set up Lisp topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid}
+| | ... | ${dut1_ip6o4_static_adjacency} | ${dut2_ip6o4_static_adjacency}
+| | Then Traffic should pass with no loss | ${duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
+
+| TC35: Verify 1460B ref-NDR at 2x 720Kpps - DUT IPv6oIPv4 - 4thread 4core 2rxq
+| | [Documentation]
+| | ... | [Cfg] DUT runs LISP tunnel config with 4 threads, 4 phy cores, \
+| | ... | 2 receive queues per NIC port.
+| | ... | [Ver] Verify ref-NDR for 1460 Byte frames using single trial
+| | ... | throughput test.
+| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | NDR | LISP_IPv6oIPv4
+| | ${framesize}= | Set Variable | 1460
+| | ${duration}= | Set Variable | 10
+| | ${rate}= | Set Variable | 720000pps
+| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When Lisp IPv6 over IPv4 forwarding initialized in a 3-node circular topology
+| | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4}
+| | ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} | ${dut_prefix6o4}
+| | And Set up Lisp topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid}
+| | ... | ${dut1_ip6o4_static_adjacency} | ${dut2_ip6o4_static_adjacency}
+| | Then Traffic should pass with no loss | ${duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
+
+| TC36: Verify 9000B ref-NDR at 2x 120Kpps - DUT IPv6oIPv4 - 4thread 4core 2rxq
+| | [Documentation]
+| | ... | [Cfg] DUT runs LISP tunnel config with 4 threads, 4 phy cores, \
+| | ... | 2 receive queues per NIC port.
+| | ... | [Ver] Verify ref-NDR for 9000 Byte frames using single trial
+| | ... | throughput test.
+| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | NDR | LISP_IPv6oIPv4
+| | ${framesize}= | Set Variable | 9000
+| | ${duration}= | Set Variable | 10
+| | ${rate}= | Set Variable | 120000pps
+| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | When Lisp IPv6 over IPv4 forwarding initialized in a 3-node circular topology
+| | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4}
+| | ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} | ${dut_prefix6o4}
+| | And Set up Lisp topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid}
+| | ... | ${dut1_ip6o4_static_adjacency} | ${dut2_ip6o4_static_adjacency}
+| | Then Traffic should pass with no loss | ${duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6