1 files changed, 229 insertions, 0 deletions
diff --git a/tests/suites/honeycomb/9 - l2_fib.robot b/tests/suites/honeycomb/9 - l2_fib.robot
new file mode 100644
index 0000000000..bc56f4e85c
--- /dev/null
+++ b/tests/suites/honeycomb/9 - l2_fib.robot
@@ -0,0 +1,229 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/default.robot
+| Resource | resources/libraries/robot/honeycomb/interfaces.robot
+| Resource | resources/libraries/robot/honeycomb/bridge_domain.robot
+| Resource | resources/libraries/robot/honeycomb/l2_fib.robot
+| Variables | tests/suites/honeycomb/resources/l2_fib.py
+| Documentation | *Honeycomb L2 FIB management test suite.*
+| Suite Setup | Run keywords
+| ... | Set test interface down
+| ... | AND
+| ... | Honeycomb removes all bridge domains | ${node}
+| Suite Teardown | Honeycomb removes all bridge domains | ${node}
+| Force tags | honeycomb_sanity
+
+*** Variables ***
+# Node and interface used in tests.
+| ${node}= | ${nodes['DUT1']}
+| ${interface}= | GigabitEthernet0/8/0
+
+*** Test Cases ***
+| Honeycomb adds L2 FIB entry (forward)
+| | [Documentation] | Honeycomb creates a bridge domain and assignes an \
+| | ... | interface to it. Then adds an L2 FIB entry (forward) to the bridge \
+| | ... | domain.
+| | ...
+| | [Teardown] | Honeycomb removes L2 FIB entry
+| | ... | ${node} | ${bd_name} | ${l2_fib_forward_oper['phys-address']}
+| | ...
+| | Given Interface state from Honeycomb should be
+| | ... | ${node} | ${interface} | down
+| | When Honeycomb sets interface state
+| | ... | ${node} | ${interface} | up
+| | Then Interface state from Honeycomb should be
+| | ... | ${node} | ${interface} | up
+| | When Honeycomb creates first l2 bridge domain
+| | ... | ${node} | ${bd_name} | ${bd_settings}
+| | Then Bridge domain configuration from Honeycomb should be
+| | ... | ${node} | ${bd_name} | ${bd_settings}
+| | Given Bridge domain configuration in interface operational data should be empty
+| | ... | ${node} | ${interface}
+| | When Honeycomb adds interface to bridge domain
+| | ... | ${node} | ${interface} | ${bd_name} | ${if_bd_settings}
+| | Then Bridge domain configuration in interface operational data should be
+| | ... | ${node} | ${interface} | ${if_bd_settings}
+| | Given L2 FIB Table from Honeycomb should be empty
+| | ... | ${node} | ${bd_name}
+| | And L2 FIB Table from VAT should be empty
+| | ... | ${node} | ${bd_index}
+| | When Honeycomb adds L2 FIB entry to bridge domain
+| | ... | ${node} | ${bd_name} | ${l2_fib_forward_cfg}
+| | Then L2 FIB Entry from Honeycomb should be
+| | ... | ${node} | ${bd_name} | ${l2_fib_forward_oper}
+| | And L2 FIB entry from VAT should be
+| | ... | ${node} | ${bd_index} | ${l2_fib_forward_vat}
+
+| Honeycomb adds L2 FIB entry (static, forward)
+| | [Documentation] | Honeycomb adds an L2 FIB entry (static, forward) to the \
+| | ... | bridge domain.
+| | ...
+| | [Teardown] | Honeycomb removes L2 FIB entry
+| | ... | ${node} | ${bd_name} | ${l2_fib_static_forward_oper['phys-address']}
+| | ...
+| | Given Bridge domain configuration in interface operational data should be
+| | ... | ${node} | ${interface} | ${if_bd_settings}
+| | And L2 FIB Table from Honeycomb should be empty
+| | ... | ${node} | ${bd_name}
+| | And L2 FIB Table from VAT should be empty
+| | ... | ${node} | ${bd_index}
+| | When Honeycomb adds L2 FIB entry to bridge domain
+| | ... | ${node} | ${bd_name} | ${l2_fib_static_forward_cfg}
+| | Then L2 FIB Entry from Honeycomb should be
+| | ... | ${node} | ${bd_name} | ${l2_fib_static_forward_oper}
+| | And L2 FIB entry from VAT should be
+| | ... | ${node} | ${bd_index} | ${l2_fib_static_forward_vat}
+
+| Honeycomb adds L2 FIB entry (static, filter)
+| | [Documentation] | Honeycomb adds an L2 FIB entry (static, filter) to the \
+| | ... | bridge domain.
+| | ...
+| | [Teardown] | Honeycomb removes L2 FIB entry
+| | ... | ${node} | ${bd_name} | ${l2_fib_filter_oper['phys-address']}
+| | ...
+| | Given Bridge domain configuration in interface operational data should be
+| | ... | ${node} | ${interface} | ${if_bd_settings}
+| | And L2 FIB Table from Honeycomb should be empty
+| | ... | ${node} | ${bd_name}
+| | And L2 FIB Table from VAT should be empty
+| | ... | ${node} | ${bd_index}
+| | When Honeycomb adds L2 FIB entry to bridge domain
+| | ... | ${node} | ${bd_name} | ${l2_fib_filter_cfg}
+| | Then L2 FIB Entry from Honeycomb should be
+| | ... | ${node} | ${bd_name} | ${l2_fib_filter_oper}
+| | And L2 FIB entry from VAT should be
+| | ... | ${node} | ${bd_index} | ${l2_fib_filter_vat}
+
+| Honeycomb adds and removes L2 FIB entry (forward)
+| | [Documentation] | Honeycomb adds an L2 FIB entry (forward) to the bridge \
+| | ... | domain and then Honeycomb removes it from the bridge domain.
+| | ...
+| | [Teardown] | Honeycomb removes L2 FIB entry
+| | ... | ${node} | ${bd_name} | ${l2_fib_forward_oper['phys-address']}
+| | ...
+| | Given Bridge domain configuration in interface operational data should be
+| | ... | ${node} | ${interface} | ${if_bd_settings}
+| | And L2 FIB Table from Honeycomb should be empty
+| | ... | ${node} | ${bd_name}
+| | And L2 FIB Table from VAT should be empty
+| | ... | ${node} | ${bd_index}
+| | When Honeycomb adds L2 FIB entry to bridge domain
+| | ... | ${node} | ${bd_name} | ${l2_fib_forward_cfg}
+| | Then L2 FIB Entry from Honeycomb should be
+| | ... | ${node} | ${bd_name} | ${l2_fib_forward_oper}
+| | And L2 FIB entry from VAT should be
+| | ... | ${node} | ${bd_index} | ${l2_fib_forward_vat}
+| | When Honeycomb removes L2 FIB entry
+| | ... | ${node} | ${bd_name} | ${l2_fib_forward_oper['phys-address']}
+| | Then L2 FIB Table from Honeycomb should be empty
+| | ... | ${node} | ${bd_name}
+| | And L2 FIB Table from VAT should be empty
+| | ... | ${node} | ${bd_index}
+
+| Honeycomb adds more than one L2 FIB entry
+| | [Documentation] | Honeycomb adds three L2 FIB entries to the bridge domain.
+| | ...
+| | [Teardown] | Honeycomb removes all L2 FIB entries
+| | ... | ${node} | ${bd_name}
+| | ...
+| | Given Bridge domain configuration in interface operational data should be
+| | ... | ${node} | ${interface} | ${if_bd_settings}
+| | And L2 FIB Table from Honeycomb should be empty
+| | ... | ${node} | ${bd_name}
+| | And L2 FIB Table from VAT should be empty
+| | ... | ${node} | ${bd_index}
+| | When Honeycomb adds L2 FIB entry to bridge domain
+| | ... | ${node} | ${bd_name} | ${l2_fib_forward_cfg}
+| | And Honeycomb adds L2 FIB entry to bridge domain
+| | ... | ${node} | ${bd_name} | ${l2_fib_static_forward_cfg}
+| | And Honeycomb adds L2 FIB entry to bridge domain
+| | ... | ${node} | ${bd_name} | ${l2_fib_filter_cfg}
+| | Then L2 FIB Entry from Honeycomb should be
+| | ... | ${node} | ${bd_name} | ${l2_fib_forward_oper}
+| | And L2 FIB Entry from Honeycomb should be
+| | ... | ${node} | ${bd_name} | ${l2_fib_static_forward_oper}
+| | And L2 FIB Entry from Honeycomb should be
+| | ... | ${node} | ${bd_name} | ${l2_fib_filter_oper}
+| | And L2 FIB entry from VAT should be
+| | ... | ${node} | ${bd_index} | ${l2_fib_forward_vat}
+| | And L2 FIB entry from VAT should be
+| | ... | ${node} | ${bd_index} | ${l2_fib_static_forward_vat}
+| | And L2 FIB entry from VAT should be
+| | ... | ${node} | ${bd_index} | ${l2_fib_filter_vat}
+
+| Honeycomb fails to set wrong L2 FIB entry
+| | [Documentation] | Honeycomb tries to add an L2 FIB entry with wrong \
+| | ... | parameters to the bridge domain. It must fail.
+| | ...
+| | [Teardown] | Honeycomb removes all L2 FIB entries
+| | ... | ${node} | ${bd_name}
+| | ...
+| | Given Bridge domain configuration in interface operational data should be
+| | ... | ${node} | ${interface} | ${if_bd_settings}
+| | And L2 FIB Table from Honeycomb should be empty
+| | ... | ${node} | ${bd_name}
+| | And L2 FIB Table from VAT should be empty
+| | ... | ${node} | ${bd_index}
+| | When Honeycomb fails to add wrong L2 FIB entry
+| | ... | ${node} | ${bd_name} | ${l2_fib_forward_cfg_wrong_mac}
+| | Then L2 FIB Table from Honeycomb should be empty
+| | ... | ${node} | ${bd_name}
+| | And L2 FIB Table from VAT should be empty
+| | ... | ${node} | ${bd_index}
+| | When Honeycomb fails to add wrong L2 FIB entry
+| | ... | ${node} | ${bd_name} | ${l2_fib_forward_cfg_wrong_if}
+| | Then L2 FIB Table from Honeycomb should be empty
+| | ... | ${node} | ${bd_name}
+| | And L2 FIB Table from VAT should be empty
+| | ... | ${node} | ${bd_index}
+| | When Honeycomb fails to add wrong L2 FIB entry
+| | ... | ${node} | ${bd_name} | ${l2_fib_forward_cfg_wrong_action}
+| | Then L2 FIB Table from Honeycomb should be empty
+| | ... | ${node} | ${bd_name}
+| | And L2 FIB Table from VAT should be empty
+| | ... | ${node} | ${bd_index}
+
+| Honeycomb fails to modify existing L2 FIB entry
+| | [Documentation] | Honeycomb tries to modify an existing L2 FIB entry. It \
+| | ... | must fail.
+| | ...
+| | [Teardown] | Honeycomb removes all L2 FIB entries
+| | ... | ${node} | ${bd_name}
+| | ...
+| | Given Bridge domain configuration in interface operational data should be
+| | ... | ${node} | ${interface} | ${if_bd_settings}
+| | And L2 FIB Table from Honeycomb should be empty
+| | ... | ${node} | ${bd_name}
+| | And L2 FIB Table from VAT should be empty
+| | ... | ${node} | ${bd_index}
+| | When Honeycomb adds L2 FIB entry to bridge domain
+| | ... | ${node} | ${bd_name} | ${l2_fib_forward_cfg}
+| | Then L2 FIB Entry from Honeycomb should be
+| | ... | ${node} | ${bd_name} | ${l2_fib_forward_oper}
+| | When Honeycomb fails to modify L2 FIB entry
+| | ... | ${node} | ${bd_name} | ${l2_fib_forward_oper['phys-address']}
+| | ... | outgoing-interface
+| | ... | ${l2_fib_forward_modified_cfg['outgoing-interface']}
+| | Then L2 FIB Entry from Honeycomb should be
+| | ... | ${node} | ${bd_name} | ${l2_fib_forward_oper}
+| | And L2 FIB entry from VAT should be
+| | ... | ${node} | ${bd_index} | ${l2_fib_forward_vat}
+
+*** Keywords ***
+| Set test interface down
+| | [Documentation] | Set the interface used in tests down.
+| | ...
+| | Honeycomb sets interface state
+| | ... | ${node} | ${interface} | down