diff options
Diffstat (limited to 'tests/suites/ipv6/ipv6_iacl_untagged.robot')
| -rw-r--r-- | tests/suites/ipv6/ipv6_iacl_untagged.robot | 110 |
1 files changed, 60 insertions, 50 deletions
diff --git a/tests/suites/ipv6/ipv6_iacl_untagged.robot b/tests/suites/ipv6/ipv6_iacl_untagged.robot index ffe9880968..e8b363373d 100644 --- a/tests/suites/ipv6/ipv6_iacl_untagged.robot +++ b/tests/suites/ipv6/ipv6_iacl_untagged.robot @@ -28,6 +28,17 @@ | Test Setup | Setup all DUTs before test | Test Teardown | Run Keywords | Show packet trace on all DUTs | ${nodes} | ... | AND | Vpp Show Errors | ${nodes['DUT1']} +| Documentation | *IPv6 routing with ingress ACL test cases* +| ... +| ... | Encapsulations: Eth-IPv6 on links TG-DUT1, TG-DUT2, DUT1-DUT2. IPv6 +| ... | ingress ACL (iACL) tests use 3-node topology TG - DUT1 - DUT2 - TG with +| ... | one link between the nodes. DUT1 and DUT2 are configured with IPv6 +| ... | routing and static routes. DUT1 is configured with iACL on link to TG, +| ... | iACL classification and permit/deny action are configured on a per test +| ... | case basis. Test ICMPv6 Echo Request packets are sent in one direction +| ... | by TG on link to DUT1 and received on TG link to DUT2. On receive TG +| ... | verifies if packets are dropped, or if received verifies packet IPv6 +| ... | src-addr, dst-addr and MAC addresses. *** Variables *** | ${dut1_to_tg_ip}= | 3ffe:62::1 @@ -44,10 +55,10 @@ | ${l2_table}= | l2 *** Test Cases *** -| VPP drops packets based on IPv6 source addresses -| | [Documentation] | Create classify table on VPP, add source IP address -| | ... | of traffic into table and setup 'deny' traffic -| | ... | and check if traffic is dropped. +| TC01: DUT with iACL IPv6 src-addr drops matching pkts +| | [Documentation] +| | ... | On DUT1 add source IPv6 address to classify table with 'deny'.\ +| | ... | Make TG verify matching packets are dropped. | | Given Path for 3-node testing is set | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} | | And Interfaces in 3-node path are up @@ -89,10 +100,10 @@ | | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2} | | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac} -| VPP drops packets based on IPv6 destination addresses -| | [Documentation] | Create classify table on VPP, add destination IP address -| | ... | of traffic into table and setup 'deny' traffic -| | ... | and check if traffic is dropped. +| TC02: DUT with iACL IPv6 dst-addr drops matching pkts +| | [Documentation] +| | ... | On DUT1 add destination IPv6 address to classify table with 'deny'.\ +| | ... | Make TG verify matching packets are dropped. | | Given Path for 3-node testing is set | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} | | And Interfaces in 3-node path are up @@ -137,10 +148,10 @@ | | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2} | | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac} -| VPP drops packets based on IPv6 src-addr and dst-addr -| | [Documentation] | Create classify table on VPP, add source and destination -| | ... | IP address of traffic into table and setup 'deny' traffic -| | ... | and check if traffic is dropped. +| TC03: DUT with iACL IPv6 src-addr and dst-addr drops matching pkts +| | [Documentation] +| | ... | On DUT1 add source and destination IPv6 addresses to classify table\ +| | ... | with 'deny'. Make TG verify matching packets are dropped. | | Given Path for 3-node testing is set | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} | | And Interfaces in 3-node path are up @@ -192,10 +203,10 @@ | | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2} | | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac} -| VPP drops packets based on IPv6 protocol (TCP) -| | [Documentation] | Create classify table on VPP, add mask for TCP port -| | ... | into table and setup 'deny' traffic -| | ... | and check if TCP traffic is dropped. +| TC04: DUT with iACL IPv6 protocol set to TCP drops matching pkts +| | [Documentation] +| | ... | On DUT1 add protocol mask and TCP protocol (0x06) to classify table\ +| | ... | with 'deny'. Make TG verify matching packets are dropped. | | Given Path for 3-node testing is set | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} | | And Interfaces in 3-node path are up @@ -233,10 +244,10 @@ | | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac} | | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 80 | 20 -| VPP drops packets based on IPv6 protocol (UDP) -| | [Documentation] | Create classify table on VPP, add mask for UDP port -| | ... | into table and setup 'deny' traffic -| | ... | and check if UDP traffic is dropped. +| TC05: DUT with iACL IPv6 protocol set to UDP drops matching pkts +| | [Documentation] +| | ... | On DUT1 add protocol mask and UDP protocol (0x11) to classify table\ +| | ... | with 'deny'. Make TG verify matching packets are dropped. | | Given Path for 3-node testing is set | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} | | And Interfaces in 3-node path are up @@ -274,10 +285,10 @@ | | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac} | | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 80 | 20 -| VPP drops packets based on IPv6 TCP src ports -| | [Documentation] | Create classify table on VPP, add source IP address -| | ... | of traffic into table and setup 'deny' traffic -| | ... | and check if traffic is dropped. +| TC06: DUT with iACL IPv6 TCP src-ports drops matching pkts +| | [Documentation] +| | ... | On DUT1 add TCP source ports to classify table with 'deny'.\ +| | ... | Make TG verify matching packets are dropped. | | Given Path for 3-node testing is set | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} | | And Interfaces in 3-node path are up @@ -316,10 +327,10 @@ | | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac} | | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 110 | 20 -| VPP drops packets based on IPv6 TCP dst ports -| | [Documentation] | Create classify table on VPP, add destination TCP port -| | ... | of traffic into table and setup 'deny' traffic -| | ... | and check if traffic is dropped. +| TC07: DUT with iACL IPv6 TCP dst-ports drops matching pkts +| | [Documentation] +| | ... | On DUT1 add TCP destination ports to classify table with 'deny'.\ +| | ... | Make TG verify matching packets are dropped. | | Given Path for 3-node testing is set | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} | | And Interfaces in 3-node path are up @@ -358,10 +369,10 @@ | | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac} | | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 20 | 110 -| VPP drops packets based on IPv6 TCP src + dst ports -| | [Documentation] | Create classify table on VPP, add source and destination -| | ... | TCP port of traffic into table and setup 'deny' traffic -| | ... | and check if traffic is dropped. +| TC08: DUT with iACL IPv6 TCP src-ports and dst-ports drops matching pkts +| | [Documentation] +| | ... | On DUT1 add TCP source and destination ports to classify table\ +| | ... | with 'deny'. Make TG verify matching packets are dropped. | | Given Path for 3-node testing is set | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} | | And Interfaces in 3-node path are up @@ -401,10 +412,10 @@ | | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac} | | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 110 | 25 -| VPP drops packets based on IPv6 UDP src ports -| | [Documentation] | Create classify table on VPP, add source UDP port -| | ... | of traffic into table and setup 'deny' traffic -| | ... | and check if traffic is dropped. +| TC09: DUT with iACL IPv6 UDP src-ports drops matching pkts +| | [Documentation] +| | ... | On DUT1 add UDP source ports to classify table with 'deny'.\ +| | ... | Make TG verify matching packets are dropped. | | Given Path for 3-node testing is set | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} | | And Interfaces in 3-node path are up @@ -443,10 +454,10 @@ | | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac} | | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 110 | 20 -| VPP drops packets based on IPv6 UDP dst ports -| | [Documentation] | Create classify table on VPP, add destination UDP port -| | ... | of traffic into table and setup 'deny' traffic -| | ... | and check if traffic is dropped. +| TC10: DUT with iACL IPv6 UDP dst-ports drops matching pkts +| | [Documentation] +| | ... | On DUT1 add TCP destination ports to classify table with 'deny'.\ +| | ... | Make TG verify matching packets are dropped. | | Given Path for 3-node testing is set | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} | | And Interfaces in 3-node path are up @@ -485,10 +496,10 @@ | | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac} | | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 20 | 110 -| VPP drops packets based on IPv6 UDP src + dst ports -| | [Documentation] | Create classify table on VPP, add source and destination -| | ... | UDP port of traffic into table and setup 'deny' traffic -| | ... | and check if traffic is dropped. +| TC11: DUT with iACL IPv6 UDP src-ports and dst-ports drops matching pkts +| | [Documentation] +| | ... | On DUT1 add UDP source and destination ports to classify table\ +| | ... | with 'deny'. Make TG verify matching packets are dropped. | | Given Path for 3-node testing is set | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} | | And Interfaces in 3-node path are up @@ -528,12 +539,11 @@ | | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac} | | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 110 | 25 -| VPP can drop packets based on src MAC + IPv6 UDP src+dst port -| | [Documentation] | Create first classify table on VPP, for source MAC address -| | ... | filtering and second classify table for IPv6 UDP source -| | ... | and destination port filtering. Add MAC address and UDP -| | ... | ports into table and set 'deny' traffic. -| | ... | Check if traffic is dropped. +| TC12: DUT with iACL MAC src-addr and iACL IPv6 UDP src-ports and dst-ports drops matching pkts +| | [Documentation] +| | ... | On DUT1 add source MAC address to classify (L2) table and add UDP\ +| | ... | source and destination ports to classify (hex) table with 'deny'. +| | ... | Make TG verify matching packets are dropped. | | Given Path for 3-node testing is set | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} | | And Interfaces in 3-node path are up |