diff options
Diffstat (limited to 'tests/suites/performance/Long_IPv4_Intel-X520-DA2.robot')
| -rw-r--r-- | tests/suites/performance/Long_IPv4_Intel-X520-DA2.robot | 161 |
1 files changed, 92 insertions, 69 deletions
diff --git a/tests/suites/performance/Long_IPv4_Intel-X520-DA2.robot b/tests/suites/performance/Long_IPv4_Intel-X520-DA2.robot index 8b80aabcff..16e1797a82 100644 --- a/tests/suites/performance/Long_IPv4_Intel-X520-DA2.robot +++ b/tests/suites/performance/Long_IPv4_Intel-X520-DA2.robot @@ -25,19 +25,34 @@ | Suite Teardown | 3-node Performance Suite Teardown | Test Setup | Setup all DUTs before test | Test Teardown | Run Keyword | Remove startup configuration of VPP from all DUTs -| Documentation | *Throughput search suite (based on RFC2544).* +| Documentation | *RFC2544: Pkt throughput IPv4 routing test cases* | ... -| ... | Test suite uses 3-node topology TG - DUT1 - DUT2 - TG, with one link -| ... | between nodes. Traffic profile contain 2 L3 streams (1 stream per -| ... | direction). Packets contain Ethernet header, IPv4 header, -| ... | IP protocol=61 and random payload. Ethernet header MAC addresses are -| ... | matching MAC addresses of the TG node. +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4 +| ... | routing and two static IPv4 /24 route entries. DUT1 and DUT2 tested with +| ... | 2p10GE NIC X520 Niantic by Intel. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop +| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage +| ... | of packets transmitted. NDR and PDR are discovered for different +| ... | Ethernet L2 frame sizes using either binary search or linear search +| ... | algorithms with configured starting rate and final step that determines +| ... | throughput measurement resolution. Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, 253 flows per flow-group) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static +| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. *** Test Cases *** -| Find NDR by using RFC2544 binary search and 64B frames through IPv4 forwarding in 3-node topology +| TC01: 64B NDR binary search - DUT IPv4 - 1thread 1core 1rxq | | [Documentation] -| | ... | Find throughput with non drop rate for 64B frames by using -| | ... | binary search with threshold 0.1Mpps. +| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \ +| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames +| | ... | using binary search start at 10GE linerate, step 100kpps. | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | | ${framesize}= | Set Variable | 64 | | ${min_rate}= | Set Variable | 100000 @@ -55,11 +70,11 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| Find PDR by using RFC2544 binary search and 64B frames through IPv4 forwarding in 3-node topology +| TC02: 64B PDR binary search - DUT IPv4 - 1thread 1core 1rxq | | [Documentation] -| | ... | Find throughput with partial drop rate for 64B frames by using -| | ... | binary search with threshold 0.1Mpps. Loss acceptance is set to 0.5 -| | ... | percent of transmitted packets. +| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \ +| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames +| | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%. | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | | ${framesize}= | Set Variable | 64 | | ${min_rate}= | Set Variable | 100000 @@ -79,10 +94,11 @@ | | ... | ${glob_loss_acceptance} | | ... | ${glob_loss_acceptance_type} -| Find NDR by using RFC2544 binary search and 1518B frames through IPv4 forwarding in 3-node topology +| TC03: 1518B NDR binary search - DUT IPv4 - 1thread 1core 1rxq | | [Documentation] -| | ... | Find throughput with non drop rate for 1518B frames by using -| | ... | binary search with threshold 10,000pps. +| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \ +| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1518 Byte frames +| | ... | using binary search start at 10GE linerate, step 10kpps. | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | | ${framesize}= | Set Variable | 1518 | | ${min_rate}= | Set Variable | 10000 @@ -100,11 +116,11 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| Find PDR by using RFC2544 binary search and 1518B frames through IPv4 forwarding in 3-node topology +| TC04: 1518B PDR binary search - DUT IPv4 - 1thread 1core 1rxq | | [Documentation] -| | ... | Find throughput with partial drop rate for 1518B frames by using -| | ... | binary search with threshold 10,000pps. Loss acceptance is set to 0.5 -| | ... | percent of transmitted packets. +| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \ +| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 1518 Byte frames +| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%. | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | | ${framesize}= | Set Variable | 1518 | | ${min_rate}= | Set Variable | 10000 @@ -124,10 +140,11 @@ | | ... | ${glob_loss_acceptance} | | ... | ${glob_loss_acceptance_type} -| Find NDR by using RFC2544 binary search and 9000B frames through IPv4 forwarding in 3-node topology +| TC05: 9000B NDR binary search - DUT IPv4 - 1thread 1core 1rxq | | [Documentation] -| | ... | Find throughput with non drop rate for 9000B frames by using -| | ... | binary search with threshold 5,000pps. +| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \ +| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 9000 Byte frames +| | ... | using binary search start at 10GE linerate, step 5kpps. | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | | ${framesize}= | Set Variable | 9000 | | ${min_rate}= | Set Variable | 5000 @@ -144,11 +161,11 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| Find PDR by using RFC2544 binary search and 9000B frames through IPv4 forwarding in 3-node topology +| TC06: 9000B PDR binary search - DUT IPv4 - 1thread 1core 1rxq | | [Documentation] -| | ... | Find throughput with partial drop rate for 9000B frames by using -| | ... | binary search with threshold of 5,000pps. Loss acceptance is set to -| | ... | 0.5 percent of transmitted packets. +| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \ +| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 9000 Byte frames +| | ... | using binary search start at 10GE linerate, step 5kpps, LT=0.5%. | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | | ${framesize}= | Set Variable | 9000 | | ${min_rate}= | Set Variable | 5000 @@ -167,10 +184,11 @@ | | ... | ${glob_loss_acceptance} | | ... | ${glob_loss_acceptance_type} -| Find NDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 64B frames through IPv4 forwarding in 3-node topology +| TC07: 64B NDR binary search - DUT IPv4 - 2threads 2cores 1rxq | | [Documentation] -| | ... | Find throughput on 2 cores with non drop rate for 64B frames by using -| | ... | binary search with threshold 0.1Mpps. +| | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, \ +| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames +| | ... | using binary search start at 10GE linerate, step 100kpps. | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 64 | | ${min_rate}= | Set Variable | 100000 @@ -188,11 +206,11 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| Find PDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 64B frames through IPv4 forwarding in 3-node topology +| TC08: 64B PDR binary search - DUT IPv4 - 2threads 2cores 1rxq | | [Documentation] -| | ... | Find throughput on 2 cores with partial drop rate for 64B frames by -| | ... | using binary search with threshold 0.1Mpps. Loss acceptance is set to -| | ... | 0.5 percent of transmitted packets. +| | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, \ +| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames +| | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%. | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | | ${framesize}= | Set Variable | 64 | | ${min_rate}= | Set Variable | 100000 @@ -212,10 +230,11 @@ | | ... | ${glob_loss_acceptance} | | ... | ${glob_loss_acceptance_type} -| Find NDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 1518B frames through IPv4 forwarding in 3-node topology +| TC09: 1518B NDR binary search - DUT IPv4 - 2threads 2cores 1rxq | | [Documentation] -| | ... | Find throughput on 2 cores with non drop rate for 1518B frames by -| | ... | using binary search with threshold 10,000pps. +| | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, \ +| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1518 Byte frames +| | ... | using binary search start at 10GE linerate, step 10kpps. | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 1518 | | ${min_rate}= | Set Variable | 10000 @@ -233,11 +252,11 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| Find PDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 1518B frames through IPv4 forwarding in 3-node topology +| TC10: 1518B PDR binary search - DUT IPv4 - 2threads 2cores 1rxq | | [Documentation] -| | ... | Find throughput on 2 cores with partial drop rate for 1518B frames by -| | ... | using binary search with threshold 10,000pps. Loss acceptance is set -| | ... | to 0.5 percent of transmitted packets. +| | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, \ +| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 1518 Byte frames +| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%. | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | | ${framesize}= | Set Variable | 1518 | | ${min_rate}= | Set Variable | 10000 @@ -257,10 +276,11 @@ | | ... | ${glob_loss_acceptance} | | ... | ${glob_loss_acceptance_type} -| Find NDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 9000B frames through IPv4 forwarding in 3-node topology +| TC11: 9000B NDR binary search - DUT IPv4 - 2threads 2cores 1rxq | | [Documentation] -| | ... | Find throughput on 2 cores with non drop rate for 9000B frames by -| | ... | using binary search with threshold 5,000pps. +| | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, \ +| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 9000 Byte frames +| | ... | using binary search start at 10GE linerate, step 5kpps. | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 9000 | | ${min_rate}= | Set Variable | 5000 @@ -277,11 +297,11 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| Find PDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 9000B frames through IPv4 forwarding in 3-node topology +| TC12: 9000B PDR binary search - DUT IPv4 - 2threads 2cores 1rxq | | [Documentation] -| | ... | Find throughput on 2 cores with partial drop rate for 9000B frames by -| | ... | using binary search with threshold 5,000pps. Loss acceptance is set -| | ... | to 0.5 percent of transmitted packets. +| | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, \ +| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 9000 Byte frames +| | ... | using binary search start at 10GE linerate, step 5kpps, LT=0.5%. | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | | ${framesize}= | Set Variable | 9000 | | ${min_rate}= | Set Variable | 5000 @@ -300,10 +320,11 @@ | | ... | ${glob_loss_acceptance} | | ... | ${glob_loss_acceptance_type} -| Find NDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 64B frames through IPv4 forwarding in 3-node topology +| TC13: 64B NDR binary search - DUT IPv4 - 4threads 4cores 2rxq | | [Documentation] -| | ... | Find throughput on 4 cores and rxqueues 2 with non drop rate for 64B -| | ... | frames by using binary search with threshold 0.1Mpps. +| | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, \ +| | ... | 2 receive queues per NIC port. [Ver] Find NDR for 64 Byte frames +| | ... | using binary search start at 10GE linerate, step 100kpps. | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 64 | | ${min_rate}= | Set Variable | 100000 @@ -321,11 +342,11 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| Find PDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 64B frames through IPv4 forwarding in 3-node topology +| TC14: 64B PDR binary search - DUT IPv4 - 4threads 4cores 2rxq | | [Documentation] -| | ... | Find throughput on 4 cores and rxqueues 2 with partial drop rate for 64B -| | ... | frames by using binary search with threshold 0.1Mpps. Loss acceptance -| | ... | is set to 0.5 percent of transmitted packets. +| | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, \ +| | ... | 2 receive queues per NIC port. [Ver] Find PDR for 64 Byte frames +| | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%. | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | | ${framesize}= | Set Variable | 64 | | ${min_rate}= | Set Variable | 100000 @@ -345,10 +366,11 @@ | | ... | ${glob_loss_acceptance} | | ... | ${glob_loss_acceptance_type} -| Find NDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 1518B frames through IPv4 forwarding in 3-node topology +| TC15: 1518B NDR binary search - DUT IPv4 - 4threads 4cores 2rxq | | [Documentation] -| | ... | Find throughput on 4 cores and rxqueues 2 with non drop rate for 1518B -| | ... | frames by using binary search with threshold 10,000pps. +| | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, \ +| | ... | 2 receive queues per NIC port. [Ver] Find NDR for 1518 Byte frames +| | ... | using binary search start at 10GE linerate, step 10kpps. | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 1518 | | ${min_rate}= | Set Variable | 10000 @@ -366,11 +388,11 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| Find PDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 1518B frames through IPv4 forwarding in 3-node topology +| TC16: 1518B PDR binary search - DUT IPv4 - 4threads 4cores 2rxq | | [Documentation] -| | ... | Find throughput on 4 cores and rxqueues 2 with partial drop rate for 1518B -| | ... | frames by using binary search with threshold 10,000pps. Loss -| | ... | acceptance is set to 0.5 percent of transmitted packets. +| | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, \ +| | ... | 2 receive queues per NIC port. [Ver] Find PDR for 1518 Byte frames +| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%. | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | | ${framesize}= | Set Variable | 1518 | | ${min_rate}= | Set Variable | 10000 @@ -390,10 +412,11 @@ | | ... | ${glob_loss_acceptance} | | ... | ${glob_loss_acceptance_type} -| Find NDR with 4 cores and rxqueues 2 by using RFC2544 linear search and 9000B frames through IPv4 forwarding in 3-node topology +| TC17: 9000B NDR binary search - DUT IPv4 - 4threads 4cores 2rxq | | [Documentation] -| | ... | Find throughput on 4 cores and rxqueues 2 with non drop rate for 9000B -| | ... | frames by using binary search with threshold 5,000pps. +| | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, \ +| | ... | 2 receive queues per NIC port. [Ver] Find NDR for 9000 Byte frames +| | ... | using binary search start at 10GE linerate, step 5kpps. | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 9000 | | ${min_rate}= | Set Variable | 5000 @@ -410,11 +433,11 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| Find PDR with 4 cores and rxqueues 2 by using RFC2544 linear search and 9000B frames through IPv4 forwarding in 3-node topology +| TC18: 9000B PDR binary search - DUT IPv4 - 4threads 4cores 2rxq | | [Documentation] -| | ... | Find throughput on 4 cores and rxqueues 2 with partial drop rate for 9000B -| | ... | frames by using binary search with threshold 5,000pps. Loss -| | ... | acceptance is set to 0.5 percent of transmitted packets. +| | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, \ +| | ... | 2 receive queues per NIC port. [Ver] Find PDR for 9000 Byte frames +| | ... | using binary search start at 10GE linerate, step 5kpps, LT=0.5%. | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | | ${framesize}= | Set Variable | 9000 | | ${min_rate}= | Set Variable | 5000 |