aboutsummaryrefslogtreecommitdiffstats
path: root/tests/suites/performance/Long_IPv6_Cop_Intel-X520-DA2.robot
diff options
context:
space:
mode:
Diffstat (limited to 'tests/suites/performance/Long_IPv6_Cop_Intel-X520-DA2.robot')
-rw-r--r--tests/suites/performance/Long_IPv6_Cop_Intel-X520-DA2.robot183
1 files changed, 111 insertions, 72 deletions
diff --git a/tests/suites/performance/Long_IPv6_Cop_Intel-X520-DA2.robot b/tests/suites/performance/Long_IPv6_Cop_Intel-X520-DA2.robot
index d8c57646d7..40e3291721 100644
--- a/tests/suites/performance/Long_IPv6_Cop_Intel-X520-DA2.robot
+++ b/tests/suites/performance/Long_IPv6_Cop_Intel-X520-DA2.robot
@@ -21,21 +21,36 @@
| Suite Teardown | 3-node Performance Suite Teardown
| Test Setup | Setup all DUTs before test
| Test Teardown | Run Keyword | Remove startup configuration of VPP from all DUTs
-| Documentation | *Throughput search suite (based on RFC2544).*
+| Documentation | *RFC2544: Pkt throughput IPv6 whitelist test cases*
| ...
-| ... | Test suite uses 3-node topology TG - DUT1 - DUT2 - TG, with one link
-| ... | between nodes. Traffic profile contain 2 L3 streams (1 stream per
-| ... | direction). Packets contain Ethernet header, IPv6 header, and random
-| ... | payload. Ethernet header MAC addresses are matching MAC addresses
-| ... | of the TG node. COP (whitelist) is applied on link between TG - DUT1
-| ... | and DUT2 - TG. Additional ipv6 fib table with index 1 is created and
-| ... | single entry added to permit all the traffic (subnet /64).
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6
+| ... | routing, two static IPv6 /64 routes and IPv6 COP security whitelist
+| ... | ingress /64 filter entries applied on links TG - DUT1 and DUT2 - TG.
+| ... | DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop
+| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage
+| ... | of packets transmitted. NDR and PDR are discovered for different
+| ... | Ethernet L2 frame sizes using either binary search or linear search
+| ... | algorithms with configured starting rate and final step that determines
+| ... | throughput measurement resolution. Test packets are generated by TG on
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
+| ... | (flow-group per direction, 253 flows per flow-group) with all packets
+| ... | containing Ethernet header, IPv6 header and static
+| ... | payload. MAC addresses are matching MAC addresses of the TG node
+| ... | interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Test Cases ***
-| Find NDR by using RFC2544 binary search and 78B frames through IPv6 forwarding with COP in 3-node topology
+| TC01: 78B NDR binary search - DUT IPv6 whitelist - 1thread 1core 1rxq
| | [Documentation]
-| | ... | Find throughput with non drop rate for 78B frames by using
-| | ... | binary search with threshold 0.1Mpps.
+| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find NDR
+| | ... | for 78 Byte frames using binary search start at 10GE linerate,
+| | ... | step 100kpps.
| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR
| | ${framesize}= | Set Variable | 78
| | ${min_rate}= | Set Variable | 100000
@@ -59,11 +74,12 @@
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| Find PDR by using RFC2544 binary search and 78B frames through IPv6 forwarding with COP in 3-node topology
+| TC02: 78B PDR binary search - DUT IPv6 whitelist - 1thread 1core 1rxq
| | [Documentation]
-| | ... | Find throughput with partial drop rate for 78B frames by using
-| | ... | binary search with threshold 0.1Mpps. Loss acceptance is set to 0.5
-| | ... | percent of transmitted packets.
+| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find PDR
+| | ... | for 78 Byte frames using binary search start at 10GE linerate,
+| | ... | step 100kpps, LT=0.5%.
| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
| | ${framesize}= | Set Variable | 78
| | ${min_rate}= | Set Variable | 100000
@@ -89,10 +105,12 @@
| | ... | ${glob_loss_acceptance}
| | ... | ${glob_loss_acceptance_type}
-| Find NDR by using RFC2544 binary search and 1518B frames through IPv6 forwarding with COP in 3-node topology
+| TC03: 1518B NDR binary search - DUT IPv6 whitelist - 1thread 1core 1rxq
| | [Documentation]
-| | ... | Find throughput with non drop rate for 1518B frames by using
-| | ... | binary search with threshold 10,000pps.
+| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find NDR
+| | ... | for 1518 Byte frames using binary search start at 10GE linerate,
+| | ... | step 10kpps.
| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR
| | ${framesize}= | Set Variable | 1518
| | ${min_rate}= | Set Variable | 10000
@@ -116,11 +134,12 @@
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| Find PDR by using RFC2544 binary search and 1518B frames through IPv6 forwarding with COP in 3-node topology
+| TC04: 1518B PDR binary search - DUT IPv6 whitelist - 1thread 1core 1rxq
| | [Documentation]
-| | ... | Find throughput with partial drop rate for 1518B frames by using
-| | ... | binary search with threshold 10,000pps. Loss acceptance is set to 0.5
-| | ... | percent of transmitted packets.
+| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find PDR
+| | ... | for 1518 Byte frames using binary search start at 10GE linerate,
+| | ... | step 10kpps, LT=0.5%.
| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
| | ${framesize}= | Set Variable | 1518
| | ${min_rate}= | Set Variable | 10000
@@ -146,10 +165,12 @@
| | ... | ${glob_loss_acceptance}
| | ... | ${glob_loss_acceptance_type}
-| Find NDR by using RFC2544 binary search and 9000B frames through IPv6 forwarding with COP in 3-node topology
+| TC05: 9000B NDR binary search - DUT IPv6 whitelist - 1thread 1core 1rxq
| | [Documentation]
-| | ... | Find throughput with non drop rate for 9000B frames by using
-| | ... | binary search with threshold 5,000pps.
+| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find NDR
+| | ... | for 9000 Byte frames using binary search start at 10GE linerate,
+| | ... | step 5kpps.
| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR
| | ${framesize}= | Set Variable | 9000
| | ${min_rate}= | Set Variable | 5000
@@ -172,11 +193,12 @@
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| Find PDR by using RFC2544 binary search and 9000B frames through IPv6 forwarding with COP in 3-node topology
+| TC06: 9000B PDR binary search - DUT IPv6 whitelist - 1thread 1core 1rxq
| | [Documentation]
-| | ... | Find throughput with partial drop rate for 9000B frames by using
-| | ... | binary search with threshold of 5,000pps. Loss acceptance is set to
-| | ... | 0.5 percent of transmitted packets.
+| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find PDR
+| | ... | for 9000 Byte frames using binary search start at 10GE linerate,
+| | ... | step 5kpps, LT=0.5%.
| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
| | ${framesize}= | Set Variable | 9000
| | ${min_rate}= | Set Variable | 5000
@@ -201,10 +223,12 @@
| | ... | ${glob_loss_acceptance}
| | ... | ${glob_loss_acceptance_type}
-| Find NDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 78B frames through IPv6 forwarding with COP in 3-node topology
+| TC07: 78B NDR binary search - DUT IPv6 whitelist - 2threads 2cores 1rxq
| | [Documentation]
-| | ... | Find throughput on 2 cores with non drop rate for 78B frames by using
-| | ... | binary search with threshold 0.1Mpps.
+| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Find NDR
+| | ... | for 78 Byte frames using binary search start at 10GE linerate,
+| | ... | step 100kpps.
| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR
| | ${framesize}= | Set Variable | 78
| | ${min_rate}= | Set Variable | 100000
@@ -228,11 +252,12 @@
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| Find PDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 78B frames through IPv6 forwarding with COP in 3-node topology
+| TC08: 78B PDR binary search - DUT IPv6 whitelist - 2threads 2cores 1rxq
| | [Documentation]
-| | ... | Find throughput on 2 cores with partial drop rate for 78B frames by
-| | ... | using binary search with threshold 10,000pps. Loss acceptance is set
-| | ... | to 0.5 percent of transmitted packets.
+| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Find PDR
+| | ... | for 78 Byte frames using binary search start at 10GE linerate,
+| | ... | step 100kpps, LT=0.5%.
| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR
| | ${framesize}= | Set Variable | 78
| | ${min_rate}= | Set Variable | 100000
@@ -258,10 +283,12 @@
| | ... | ${glob_loss_acceptance}
| | ... | ${glob_loss_acceptance_type}
-| Find NDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 1518B frames through IPv6 forwarding with COP in 3-node topology
+| TC09: 1518B NDR binary search - DUT IPv6 whitelist - 2threads 2cores 1rxq
| | [Documentation]
-| | ... | Find throughput on 2 cores with non drop rate for 1518B frames by
-| | ... | using binary search with threshold 10,000pps.
+| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Find NDR
+| | ... | for 1518 Byte frames using binary search start at 10GE linerate,
+| | ... | step 10kpps.
| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR
| | ${framesize}= | Set Variable | 1518
| | ${min_rate}= | Set Variable | 10000
@@ -285,11 +312,12 @@
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| Find PDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 1518B frames through IPv6 forwarding with COP in 3-node topology
+| TC10: 1518B PDR binary search - DUT IPv6 whitelist - 2threads 2cores 1rxq
| | [Documentation]
-| | ... | Find throughput on 2 cores with partial drop rate for 1518B frames by
-| | ... | using binary search with threshold 10,000pps. Loss acceptance is set
-| | ... | to 0.5 percent of transmitted packets.
+| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Find PDR
+| | ... | for 1518 Byte frames using binary search start at 10GE linerate,
+| | ... | step 10kpps, LT=0.5%.
| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR
| | ${framesize}= | Set Variable | 1518
| | ${min_rate}= | Set Variable | 10000
@@ -315,10 +343,12 @@
| | ... | ${glob_loss_acceptance}
| | ... | ${glob_loss_acceptance_type}
-| Find NDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 9000B frames through IPv6 forwarding with COP in 3-node topology
+| TC11: 9000B NDR binary search - DUT IPv6 whitelist - 2threads 2cores 1rxq
| | [Documentation]
-| | ... | Find throughput on 2 cores with non drop rate for 9000B frames by
-| | ... | using binary search with threshold 5,000pps.
+| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Find NDR
+| | ... | for 9000 Byte frames using binary search start at 10GE linerate,
+| | ... | step 5kpps.
| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR
| | ${framesize}= | Set Variable | 9000
| | ${min_rate}= | Set Variable | 5000
@@ -341,11 +371,12 @@
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| Find PDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 9000B frames through IPv6 forwarding with COP in 3-node topology
+| TC12: 9000B PDR binary search - DUT IPv6 whitelist - 2threads 2cores 1rxq
| | [Documentation]
-| | ... | Find throughput on 2 cores with partial drop rate for 9000B frames by
-| | ... | using binary search with threshold 5,000pps. Loss acceptance is set
-| | ... | to 0.5 percent of transmitted packets.
+| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Find PDR
+| | ... | for 9000 Byte frames using binary search start at 10GE linerate,
+| | ... | step 5kpps, LT=0.5%.
| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR
| | ${framesize}= | Set Variable | 9000
| | ${min_rate}= | Set Variable | 5000
@@ -370,10 +401,12 @@
| | ... | ${glob_loss_acceptance}
| | ... | ${glob_loss_acceptance_type}
-| Find NDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 78B frames through IPv6 forwarding with COP in 3-node topology
+| TC13: 78B NDR binary search - DUT IPv6 whitelist - 4threads 4cores 2rxq
| | [Documentation]
-| | ... | Find throughput on 4 cores and rxqueues 2 with non drop rate for 78B
-| | ... | frames by using binary search with threshold 0.1Mpps.
+| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \
+| | ... | 4 threads, 4 phy cores, 2 receive queue per NIC port. [Ver] Find NDR
+| | ... | for 78 Byte frames using binary search start at 10GE linerate,
+| | ... | step 100kpps.
| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR
| | ${framesize}= | Set Variable | 78
| | ${min_rate}= | Set Variable | 100000
@@ -397,11 +430,12 @@
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| Find PDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 78B frames through IPv6 forwarding with COP in 3-node topology
+| TC14: 78B PDR binary search - DUT IPv6 whitelist - 4threads 4cores 2rxq
| | [Documentation]
-| | ... | Find throughput on 4 cores and rxqueues 2 with partial drop rate for 78B
-| | ... | frames by using binary search with threshold 0.1Mpps. Loss acceptance
-| | ... | is set to 0.5 percent of transmitted packets.
+| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \
+| | ... | 4 threads, 4 phy cores, 2 receive queue per NIC port. [Ver] Find PDR
+| | ... | for 78 Byte frames using binary search start at 10GE linerate,
+| | ... | step 100kpps, LT=0.5%.
| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR
| | ${framesize}= | Set Variable | 78
| | ${min_rate}= | Set Variable | 100000
@@ -427,10 +461,12 @@
| | ... | ${glob_loss_acceptance}
| | ... | ${glob_loss_acceptance_type}
-| Find NDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 1518B frames through IPv6 forwarding with COP in 3-node topology
+| TC15: 1518B NDR binary search - DUT IPv6 whitelist - 4threads 4cores 2rxq
| | [Documentation]
-| | ... | Find throughput on 4 cores and rxqueues 2 with non drop rate for 1518B
-| | ... | frames by using binary search with threshold 10,000pps.
+| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \
+| | ... | 4 threads, 4 phy cores, 2 receive queue per NIC port. [Ver] Find NDR
+| | ... | for 1518 Byte frames using binary search start at 10GE linerate,
+| | ... | step 10kpps.
| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR
| | ${framesize}= | Set Variable | 1518
| | ${min_rate}= | Set Variable | 10000
@@ -454,11 +490,12 @@
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| Find PDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 1518B frames through IPv6 forwarding with COP in 3-node topology
+| TC16: 1518B PDR binary search - DUT IPv6 whitelist - 4threads 4cores 2rxq
| | [Documentation]
-| | ... | Find throughput on 4 cores and rxqueues 2 with partial drop rate for 1518B
-| | ... | frames by using binary search with threshold 10,000pps. Loss
-| | ... | acceptance is set to 0.5 percent of transmitted packets.
+| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \
+| | ... | 4 threads, 4 phy cores, 2 receive queue per NIC port. [Ver] Find PDR
+| | ... | for 1518 Byte frames using binary search start at 10GE linerate,
+| | ... | step 10kpps, LT=0.5%.
| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR
| | ${framesize}= | Set Variable | 1518
| | ${min_rate}= | Set Variable | 10000
@@ -484,11 +521,12 @@
| | ... | ${glob_loss_acceptance}
| | ... | ${glob_loss_acceptance_type}
-| Find NDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 9000B frames through IPv6 forwarding with COP in 3-node topology
+| TC17: 9000B NDR binary search - DUT IPv6 whitelist - 4threads 4cores 2rxq
| | [Documentation]
-| | ... | Find throughput on 4 cores and rxqueues 2 with non drop rate for 9000B
-| | ... | frames by using binary search starting at 138,580pps, stepping down
-| | ... | with step of 5,000pps.
+| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \
+| | ... | 4 threads, 4 phy cores, 2 receive queue per NIC port. [Ver] Find NDR
+| | ... | for 9000 Byte frames using binary search start at 10GE linerate,
+| | ... | step 5kpps.
| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR
| | ${framesize}= | Set Variable | 9000
| | ${min_rate}= | Set Variable | 5000
@@ -511,11 +549,12 @@
| | ... | ${min_rate} | ${max_rate}
| | ... | ${threshold}
-| Find PDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 9000B frames through IPv6 forwarding with COP in 3-node topology
+| TC18: 9000B PDR binary search - DUT IPv6 whitelist - 4threads 4cores 2rxq
| | [Documentation]
-| | ... | Find throughput on 4 cores and rxqueues 2 with partial drop rate for 9000B
-| | ... | frames by using binary search with threshold 5,000pps. Loss
-| | ... | acceptance is set to 0.5 percent of transmitted packets.
+| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \
+| | ... | 4 threads, 4 phy cores, 2 receive queue per NIC port. [Ver] Find PDR
+| | ... | for 9000 Byte frames using binary search start at 10GE linerate,
+| | ... | step 5kpps, LT=0.5%.
| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR
| | ${framesize}= | Set Variable | 9000
| | ${min_rate}= | Set Variable | 5000