diff options
Diffstat (limited to 'tests/suites/performance/Long_Xconnect_Dot1q_Intel-X520-DA2.robot')
| -rw-r--r-- | tests/suites/performance/Long_Xconnect_Dot1q_Intel-X520-DA2.robot | 188 |
1 files changed, 101 insertions, 87 deletions
diff --git a/tests/suites/performance/Long_Xconnect_Dot1q_Intel-X520-DA2.robot b/tests/suites/performance/Long_Xconnect_Dot1q_Intel-X520-DA2.robot index dc0d3a7dad..b25065b43c 100644 --- a/tests/suites/performance/Long_Xconnect_Dot1q_Intel-X520-DA2.robot +++ b/tests/suites/performance/Long_Xconnect_Dot1q_Intel-X520-DA2.robot @@ -36,18 +36,18 @@ | ${tag_rewrite}= | pop-1 *** Test Cases *** -| Find NDR by using RFC2544 linear search and 64B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology +| Find NDR by using RFC2544 binary search and 64B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology | | [Documentation] -| | ... | Find throughput with non drop rate by using linear search starting -| | ... | at 4.2Mpps, stepping down with step of 0.1Mpps. Frames from and to TG -| | ... | are 64B long. Tagging is applied between DUTs inserting 4B VLAN ID -| | ... | into a packet header. +| | ... | Find throughput with non drop rate by using binary search with +| | ... | threshold 0.1Mpps. Frames from and to TG are 64B long. Tagging is +| | ... | applied between DUTs inserting 4B VLAN ID into a packet header. | | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | | ${framesize}= | Set Variable | 64 -| | ${start_rate}= | Set Variable | 4200000 -| | ${step_rate}= | Set Variable | 100000 | | ${min_rate}= | Set Variable | 100000 -| | ${max_rate}= | Set Variable | 14880952 +| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_68B} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and rss '1' without HTT to all DUTs | | And Add all PCI devices to all DUTs | | And Add No Multi Seg to all DUTs @@ -61,22 +61,23 @@ | | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect | | ... | ${dut1} | ${dut1_if1} | ${subif_index_1} | | ... | ${dut2} | ${dut2_if2} | ${subif_index_2} -| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate} -| | ... | ${step_rate} | 3-node-xconnect +| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} -| Find NDR by using RFC2544 linear search and 1518B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology +| Find NDR by using RFC2544 binary search and 1518B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology | | [Documentation] -| | ... | Find throughput with non drop rate by using linear search starting -| | ... | at 812,743pps, stepping down with step of 10,000pps. Frames from and -| | ... | to TG are 1518B long. Tagging is applied between DUTs inserting 4B -| | ... | VLAN ID into a packet header. +| | ... | Find throughput with non drop rate by using binary search with +| | ... | threshold 10,000pps. Frames from and to TG are 1518B long. Tagging is +| | ... | applied between DUTs inserting 4B VLAN ID into a packet header. | | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | | ${framesize}= | Set Variable | 1518 -| | ${start_rate}= | Set Variable | 812743 -| | ${step_rate}= | Set Variable | 10000 | | ${min_rate}= | Set Variable | 10000 -| | ${max_rate}= | Set Variable | 812743 +| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1522B} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and rss '1' without HTT to all DUTs | | And Add all PCI devices to all DUTs | | And Add No Multi Seg to all DUTs @@ -90,22 +91,23 @@ | | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect | | ... | ${dut1} | ${dut1_if1} | ${subif_index_1} | | ... | ${dut2} | ${dut2_if2} | ${subif_index_2} -| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate} -| | ... | ${step_rate} | 3-node-xconnect +| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} -| Find NDR by using RFC2544 linear search and 9000B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology +| Find NDR by using RFC2544 binary search and 9000B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology | | [Documentation] -| | ... | Find throughput with non drop rate by using linear search starting -| | ... | at 138,580pps, stepping down with step of 5,000pps. Frames from and -| | ... | to TG are 9000B long. Tagging is applied between DUTs inserting 4B -| | ... | VLAN ID into a packet header. +| | ... | Find throughput with non drop rate by using binary searchwith +| | ... | threshold 5,000pps. Frames from and to TG are 9000B long. Tagging is +| | ... | applied between DUTs inserting 4B VLAN ID into a packet header. | | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | | ${framesize}= | Set Variable | 9000 -| | ${start_rate}= | Set Variable | 138580 -| | ${step_rate}= | Set Variable | 5000 | | ${min_rate}= | Set Variable | 5000 -| | ${max_rate}= | Set Variable | 138580 +| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9004B} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} | | Given Add '1' worker threads and rss '1' without HTT to all DUTs | | And Add all PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -118,22 +120,23 @@ | | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect | | ... | ${dut1} | ${dut1_if1} | ${subif_index_1} | | ... | ${dut2} | ${dut2_if2} | ${subif_index_2} -| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate} -| | ... | ${step_rate} | 3-node-xconnect +| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} -| Find NDR with 2 cores and rss 1 by using RFC2544 linear search and 64B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology +| Find NDR with 2 cores and rss 1 by using RFC2544 binary search and 64B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology | | [Documentation] -| | ... | Find throughput on 2 cores with non drop rate by using linear search -| | ... | starting at 7.8Mpps, stepping down with step of 0.1Mpps. Frames from -| | ... | and to TG are 64B long. Tagging is applied between DUTs inserting 4B -| | ... | VLAN ID into a packet header. +| | ... | Find throughput on 2 cores with non drop rate by using binary search +| | ... | with threshold 0.1Mpps. Frames from and to TG are 64B long. Tagging +| | ... | is applied between DUTs inserting 4B VLAN ID into a packet header. | | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | | ${framesize}= | Set Variable | 64 -| | ${start_rate}= | Set Variable | 7800000 -| | ${step_rate}= | Set Variable | 100000 | | ${min_rate}= | Set Variable | 100000 -| | ${max_rate}= | Set Variable | 14880952 +| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_68B} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and rss '1' without HTT to all DUTs | | And Add all PCI devices to all DUTs | | And Add No Multi Seg to all DUTs @@ -147,22 +150,24 @@ | | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect | | ... | ${dut1} | ${dut1_if1} | ${subif_index_1} | | ... | ${dut2} | ${dut2_if2} | ${subif_index_2} -| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate} -| | ... | ${step_rate} | 3-node-xconnect +| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} -| Find NDR with 2 cores and rss 1 by using RFC2544 linear search and 1518B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology +| Find NDR with 2 cores and rss 1 by using RFC2544 binary search and 1518B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology | | [Documentation] -| | ... | Find throughput on 2 cores with non drop rate by using linear search -| | ... | starting at 812,743pps, stepping down with step of 10,000pps. Frames -| | ... | from and to TG are 1518B long. Tagging is applied between DUTs -| | ... | inserting 4B VLAN ID into a packet header. +| | ... | Find throughput on 2 cores with non drop rate by using binary search +| | ... | with threshold 10,000pps. Frames from and to TG are 1518B long. +| | ... | Tagging is applied between DUTs inserting 4B VLAN ID into a packet +| | ... | header. | | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | | ${framesize}= | Set Variable | 1518 -| | ${start_rate}= | Set Variable | 812743 -| | ${step_rate}= | Set Variable | 10000 | | ${min_rate}= | Set Variable | 10000 -| | ${max_rate}= | Set Variable | 812743 +| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1522B} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and rss '1' without HTT to all DUTs | | And Add all PCI devices to all DUTs | | And Add No Multi Seg to all DUTs @@ -176,22 +181,24 @@ | | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect | | ... | ${dut1} | ${dut1_if1} | ${subif_index_1} | | ... | ${dut2} | ${dut2_if2} | ${subif_index_2} -| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate} -| | ... | ${step_rate} | 3-node-xconnect +| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} -| Find NDR with 2 cores and rss 1 by using RFC2544 linear search and 9000B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology +| Find NDR with 2 cores and rss 1 by using RFC2544 binary search and 9000B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology | | [Documentation] -| | ... | Find throughput on 2 cores with non drop rate by using linear search -| | ... | starting at 138,580pps, stepping down with step of 5,000pps. Frames -| | ... | from and to TG are 9000B long. Tagging is applied between DUTs -| | ... | inserting 4B VLAN ID into a packet header. +| | ... | Find throughput on 2 cores with non drop rate by using binary search +| | ... | with threshold 5,000pps. Frames from and to TG are 9000B long. +| | ... | Tagging is applied between DUTs inserting 4B VLAN ID into a packet +| | ... | header. | | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | | ${framesize}= | Set Variable | 9000 -| | ${start_rate}= | Set Variable | 138580 -| | ${step_rate}= | Set Variable | 5000 | | ${min_rate}= | Set Variable | 5000 -| | ${max_rate}= | Set Variable | 138580 +| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9004B} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} | | Given Add '2' worker threads and rss '1' without HTT to all DUTs | | And Add all PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -204,22 +211,24 @@ | | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect | | ... | ${dut1} | ${dut1_if1} | ${subif_index_1} | | ... | ${dut2} | ${dut2_if2} | ${subif_index_2} -| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate} -| | ... | ${step_rate} | 3-node-xconnect +| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} -| Find NDR with 4 cores and rss 2 by using RFC2544 linear search and 64B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology +| Find NDR with 4 cores and rss 2 by using RFC2544 binary search and 64B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology | | [Documentation] | | ... | Find throughput on 4 cores and rss 2 with non drop rate by using -| | ... | linear search starting at 12Mpps, stepping down with step of 0.1Mpps. -| | ... | Frames from and to TG are 64B long. Tagging is applied between DUTs -| | ... | inserting 4B VLAN ID into a packet header. +| | ... | binary search with threshold 0.1Mpps. Frames from and to TG are 64B +| | ... | long. Tagging is applied between DUTs inserting 4B VLAN ID into a +| | ... | packet header. | | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | | ${framesize}= | Set Variable | 64 -| | ${start_rate}= | Set Variable | 12000000 -| | ${step_rate}= | Set Variable | 100000 | | ${min_rate}= | Set Variable | 100000 -| | ${max_rate}= | Set Variable | 14880952 +| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_68B} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and rss '2' without HTT to all DUTs | | And Add all PCI devices to all DUTs | | And Add No Multi Seg to all DUTs @@ -233,22 +242,24 @@ | | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect | | ... | ${dut1} | ${dut1_if1} | ${subif_index_1} | | ... | ${dut2} | ${dut2_if2} | ${subif_index_2} -| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate} -| | ... | ${step_rate} | 3-node-xconnect +| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} -| Find NDR with 4 cores and rss 2 by using RFC2544 linear search and 1518B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology +| Find NDR with 4 cores and rss 2 by using RFC2544 binary search and 1518B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology | | [Documentation] | | ... | Find throughput on 4 cores and rss 2 with non drop rate by using -| | ... | linear search starting at 812,743pps, stepping down with step of -| | ... | 10,000pps. Frames from and to TG are 1518B long. Tagging is applied -| | ... | between DUTs inserting 4B VLAN ID into a packet header. +| | ... | binary search with threshold 10,000pps. Frames from and to TG are +| | ... | 1518B long. Tagging is applied between DUTs inserting 4B VLAN ID into +| | ... | a packet header. | | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | | ${framesize}= | Set Variable | 1518 -| | ${start_rate}= | Set Variable | 812743 -| | ${step_rate}= | Set Variable | 10000 | | ${min_rate}= | Set Variable | 10000 -| | ${max_rate}= | Set Variable | 812743 +| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1522B} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and rss '2' without HTT to all DUTs | | And Add all PCI devices to all DUTs | | And Add No Multi Seg to all DUTs @@ -262,22 +273,24 @@ | | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect | | ... | ${dut1} | ${dut1_if1} | ${subif_index_1} | | ... | ${dut2} | ${dut2_if2} | ${subif_index_2} -| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate} -| | ... | ${step_rate} | 3-node-xconnect +| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} -| Find NDR with 4 cores and rss 2 by using RFC2544 linear search and 9000B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology +| Find NDR with 4 cores and rss 2 by using RFC2544 binary search and 9000B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology | | [Documentation] | | ... | Find throughput on 4 cores and rss 2 with non drop rate by using -| | ... | linear search starting at 138,580pps, stepping down with step of -| | ... | 5,000pps. Frames from and to TG are 9000B long. Tagging is applied -| | ... | between DUTs inserting 4B VLAN ID into a packet header. +| | ... | binary search with threshold 5,000pps. Frames from and to TG are +| | ... | 9000B long. Tagging is applied between DUTs inserting 4B VLAN ID into +| | ... | a packet header. | | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | | ${framesize}= | Set Variable | 9000 -| | ${start_rate}= | Set Variable | 138580 -| | ${step_rate}= | Set Variable | 5000 | | ${min_rate}= | Set Variable | 5000 -| | ${max_rate}= | Set Variable | 138580 +| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9004B} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} | | Given Add '4' worker threads and rss '2' without HTT to all DUTs | | And Add all PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -290,6 +303,7 @@ | | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect | | ... | ${dut1} | ${dut1_if1} | ${subif_index_1} | | ... | ${dut2} | ${dut2_if2} | ${subif_index_2} -| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate} -| | ... | ${step_rate} | 3-node-xconnect +| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} |