aboutsummaryrefslogtreecommitdiffstats
path: root/tests/suites/vrf/vrf_tests.robot
diff options
context:
space:
mode:
Diffstat (limited to 'tests/suites/vrf/vrf_tests.robot')
-rw-r--r--tests/suites/vrf/vrf_tests.robot392
1 files changed, 0 insertions, 392 deletions
diff --git a/tests/suites/vrf/vrf_tests.robot b/tests/suites/vrf/vrf_tests.robot
deleted file mode 100644
index 239900c1eb..0000000000
--- a/tests/suites/vrf/vrf_tests.robot
+++ /dev/null
@@ -1,392 +0,0 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/default.robot
-| Resource | resources/libraries/robot/ipv4.robot
-| Resource | resources/libraries/robot/ipv6.robot
-| Resource | resources/libraries/robot/interfaces.robot
-| Resource | resources/libraries/robot/testing_path.robot
-| Resource | resources/libraries/robot/traffic.robot
-| Resource | resources/libraries/robot/l2_traffic.robot
-| Library | resources.libraries.python.Trace
-| Library | resources.libraries.python.IPUtil
-| Force Tags | HW_ENV | VM_ENV | 3_NODE_DOUBLE_LINK_TOPO
-| Test Setup | Run Keywords | Setup all DUTs before test
-| ... | AND | Setup all TGs before traffic script
-| Test Teardown | Show Packet Trace on All DUTs | ${nodes}
-| Documentation | *Vpn routed forwarding - baseline*
-| ... | *[Top] Network Topologies:* TG=DUT1=DUT2=TG 3-node topology with two
-| ... | links in between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for L2 switching of
-| ... | IPv4.
-| ... | *[Cfg] DUT configuration:*Each DUT is configured with two VRF tables;
-| ... | Separation of traffic is tested by IP packets; Basic ARP and ROUTES are
-| ... | set on DUT nodes; IP addresses are set on DUT interfaces.
-| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets
-| ... | are sent by TG on link to DUT1, DUT2 or back to TG; On receipt TG
-| ... | verifies packets for correctness and their IPv4 src-addr, dst-addr,
-| ... | and MAC addresses.
-| ... | *[Ref] Applicable standard specifications:*
-
-*** Variables ***
-| ${fib_table_1}= | 9
-| ${fib_table_2}= | 99
-
-| ${dut1_to_tg_ip1}= | 10.0.0.3
-| ${dut1_to_tg_ip2}= | 10.0.0.4
-| ${dut2_to_tg_ip1}= | 30.0.0.3
-| ${dut2_to_tg_ip2}= | 30.0.0.4
-
-| ${dut1_to_dut2_ip1}= | 20.0.0.1
-| ${dut1_to_dut2_ip2}= | 20.0.0.2
-| ${dut2_to_dut1_ip1}= | 20.0.0.3
-| ${dut2_to_dut1_ip2}= | 20.0.0.4
-
-| ${tg_dut1_ip1}= | 10.0.0.1
-| ${tg_dut1_ip2}= | 10.0.0.2
-| ${tg_dut2_ip1}= | 30.0.0.1
-| ${tg_dut2_ip2}= | 30.0.0.2
-
-| ${ip_prefix}= | 24
-
-*** Test Cases ***
-| TC01: TG packets routed to DUT ingress interface, VPP configured with two VRFs
-| | [Documentation]
-| | ... | [Top] TG=DUT1=DUT2=TG
-| | ... | [Enc] Eth-IPv4-ICMPv4.
-| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each
-| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces
-| | ... | are configured with IP addresses from *Variables*. On every ingress
-| | ... | and egress port on DUT is configured ARP and each DUT is configured
-| | ... | with one route.
-| | ... | [Ver] Packet is send from TG->DUT1-if1 to DUT1->TG-if1 and from
-| | ... | TG->DUT1-if2 to DUT1->TG-if2 and checked if arrived.
-| | Given Path for Double-Link 3-node testing is set
-| | ... | ${nodes['TG']} | ${nodes['DUT1']}
-| | ... | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Interfaces in Double-Link 3-node path are UP
-| | When Setup Env - 2xVRF Each Node
-| | Then Node replies to ICMP echo request | ${tg_node}
-| | ... | ${tg_to_dut1_if1} | ${dut1_to_tg_if1_mac}
-| | ... | ${tg_to_dut1_if1_mac} | ${dut1_to_tg_ip1} | ${tg_dut1_ip1} | 5
-| | And Node replies to ICMP echo request | ${tg_node}
-| | ... | ${tg_to_dut1_if2} | ${dut1_to_tg_if2_mac}
-| | ... | ${tg_to_dut1_if2_mac} | ${dut1_to_tg_ip2} | ${tg_dut1_ip2} | 5
-
-| TC02: TG packets routed to DUT egress interface, VPP configured with two VRFs
-| | [Documentation]
-| | ... | [Top] TG=DUT1=DUT2=TG
-| | ... | [Enc] Eth-IPv4-ICMPv4.
-| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each
-| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces
-| | ... | are configured with IP addresses from *Variables*. On every ingress
-| | ... | and egress port on DUT is configured ARP and each DUT is configured
-| | ... | with one route.
-| | ... | [Ver] Packet is send from TG->DUT1-if1 to DUT1->DUT2-if1 and from
-| | ... | TG->DUT1-if2 to DUT1->DUT2-if2 and checked if arrived.
-| | Given Path for Double-Link 3-node testing is set
-| | ... | ${nodes['TG']} | ${nodes['DUT1']}
-| | ... | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Interfaces in Double-Link 3-node path are UP
-| | When Setup Env - 2xVRF Each Node
-| | Then Node replies to ICMP echo request | ${tg_node} | ${tg_to_dut1_if1}
-| | ... | ${dut1_to_tg_if1_mac} | ${tg_to_dut1_if1_mac}
-| | ... | ${dut1_to_dut2_ip1} | ${tg_dut1_ip1} | 5
-| | And Node replies to ICMP echo request | ${tg_node} | ${tg_to_dut1_if2}
-| | ... | ${dut1_to_tg_if2_mac} | ${tg_to_dut1_if2_mac}
-| | ... | ${dut1_to_dut2_ip2} | ${tg_dut1_ip2} | 5
-
-| TC03: TG packets routed to DUT2 ingress interface through DUT1, VPP configured with two VRFs
-| | [Documentation]
-| | ... | [Top] TG=DUT1=DUT2=TG
-| | ... | [Enc] Eth-IPv4-ICMPv4.
-| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each
-| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces
-| | ... | are configured with IP addresses from *Variables*. On every ingress
-| | ... | and egress port on DUT is configured ARP and each DUT is configured
-| | ... | with one route.
-| | ... | [Ver] Packet is send from TG->DUT1-if1 to DUT2->DUT1-if1 and from
-| | ... | TG->DUT1-if2 to DUT2->DUT1-if2 and checked if arrived.
-| | Given Path for Double-Link 3-node testing is set
-| | ... | ${nodes['TG']} | ${nodes['DUT1']}
-| | ... | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Interfaces in Double-Link 3-node path are UP
-| | When Setup Env - 2xVRF Each Node
-| | Then Node replies to ICMP echo request | ${tg_node} | ${tg_to_dut1_if1}
-| | ... | ${dut1_to_tg_if1_mac} | ${tg_to_dut1_if1_mac}
-| | ... | ${dut2_to_dut1_ip1} | ${tg_dut1_ip1} | 5
-| | And Node replies to ICMP echo request | ${tg_node} | ${tg_to_dut1_if2}
-| | ... | ${dut1_to_tg_if2_mac} | ${tg_to_dut1_if2_mac}
-| | ... | ${dut2_to_dut1_ip2} | ${tg_dut1_ip2} | 5
-
-| TC04: TG packets routed to DUT2 egress interface through DUT1, VPP configured with two VRFs
-| | [Documentation]
-| | ... | [Top] TG=DUT1=DUT2=TG
-| | ... | [Enc] Eth-IPv4-ICMPv4.
-| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each
-| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces
-| | ... | are configured with IP addresses from *Variables*. On every ingress
-| | ... | and egress port on DUT is configured ARP and each DUT is configured
-| | ... | with one route.
-| | ... | [Ver] Packet is send from TG->DUT1-if1 to DUT2->TG-if1 and from
-| | ... | TG->DUT1-if2 to DUT2->TG-if2 and checked if arrived.
-| | Given Path for Double-Link 3-node testing is set
-| | ... | ${nodes['TG']} | ${nodes['DUT1']}
-| | ... | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Interfaces in Double-Link 3-node path are UP
-| | When Setup Env - 2xVRF Each Node
-| | Then Node replies to ICMP echo request | ${tg_node} | ${tg_to_dut1_if1}
-| | ... | ${dut1_to_tg_if1_mac} | ${tg_to_dut1_if1_mac}
-| | ... | ${dut2_to_tg_ip1} | ${tg_dut1_ip1} | 5
-| | And Node replies to ICMP echo request | ${tg_node} | ${tg_to_dut1_if2}
-| | ... | ${dut1_to_tg_if2_mac} | ${tg_to_dut1_if2_mac}
-| | ... | ${dut2_to_tg_ip2} | ${tg_dut1_ip2} | 5
-
-| TC05: TG packets routed to TG through DUT1 and DUT2, VPP configured with two VRFs
-| | [Documentation]
-| | ... | [Top] TG=DUT1=DUT2=TG
-| | ... | [Enc] Eth-IPv4-ICMPv4.
-| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each
-| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces
-| | ... | are configured with IP addresses from *Variables*. On every ingress
-| | ... | and egress port on DUT is configured ARP and each DUT is configured
-| | ... | with one route.
-| | ... | [Ver] Packet is send from TG->DUT1-if1 to TG->DUT2-if1 and from
-| | ... | TG->DUT1-if2 to TG->DUT2-if2 and checked if arrived.
-| | Given Path for Double-Link 3-node testing is set
-| | ... | ${nodes['TG']} | ${nodes['DUT1']}
-| | ... | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Interfaces in Double-Link 3-node path are UP
-| | When Setup Env - 2xVRF Each Node
-| | Then Send Packet And Check Headers | ${tg_node} | ${tg_dut1_ip1}
-| | ... | ${tg_dut2_ip1} | ${tg_to_dut1_if1} | ${tg_to_dut1_if1_mac}
-| | ... | ${dut1_to_tg_if1_mac} | ${tg_to_dut2_if1} | ${dut2_to_tg_if1_mac}
-| | ... | ${tg_to_dut2_if1_mac}
-| | And Send Packet And Check Headers | ${tg_node}
-| | ... | ${tg_dut1_ip2} | ${tg_dut2_ip2} | ${tg_to_dut1_if2}
-| | ... | ${tg_to_dut1_if2_mac} | ${dut1_to_tg_if2_mac} | ${tg_to_dut2_if2}
-| | ... | ${dut2_to_tg_if2_mac} | ${tg_to_dut2_if2_mac}
-
-| TC06: TG packets not routed to DUT ingress interface in different VRF, VPP configured with two VRFs
-| | [Documentation]
-| | ... | [Top] TG=DUT1=DUT2=TG
-| | ... | [Enc] Eth-IPv4-ICMPv4.
-| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each
-| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces
-| | ... | are configured with IP addresses from *Variables*. On every ingress
-| | ... | and egress port on DUT is configured ARP and each DUT is configured
-| | ... | with one route.
-| | ... | [Ver] Packet is send from TG->DUT1-if1 to DUT1->TG-if2 where it
-| | ... | should not arrive.
-| | [Tags] | SKIP_PATCH
-| | Given Path for Double-Link 3-node testing is set
-| | ... | ${nodes['TG']} | ${nodes['DUT1']}
-| | ... | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Interfaces in Double-Link 3-node path are UP
-| | When Setup Env - 2xVRF Each Node
-| | Then Run Keyword And Expect Error | ICMP echo Rx timeout
-| | ... | Node replies to ICMP echo request
-| | ... | ${tg_node} | ${tg_to_dut1_if1}
-| | ... | ${dut1_to_tg_if1_mac} | ${tg_to_dut1_if1_mac}
-| | ... | ${dut1_to_tg_ip2} | ${tg_dut1_ip1} | 5
-
-| TC07: TG packets not routed to DUT egress interface in different VRF, VPP configured with two VRFs
-| | [Documentation]
-| | ... | [Top] TG=DUT1=DUT2=TG
-| | ... | [Enc] Eth-IPv4-ICMPv4.
-| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each
-| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces
-| | ... | are configured with IP addresses from *Variables*. On every ingress
-| | ... | and egress port on DUT is configured ARP and each DUT is configured
-| | ... | with one route.
-| | ... | [Ver] Packet is send from TG->DUT1-if1 to DUT1->DUT2-if2 where it
-| | ... | should not arrive.
-| | [Tags] | SKIP_PATCH
-| | Given Path for Double-Link 3-node testing is set
-| | ... | ${nodes['TG']} | ${nodes['DUT1']}
-| | ... | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Interfaces in Double-Link 3-node path are UP
-| | When Setup Env - 2xVRF Each Node
-| | Then Run Keyword And Expect Error | ICMP echo Rx timeout
-| | ... | Node replies to ICMP echo request
-| | ... | ${tg_node} | ${tg_to_dut1_if1}
-| | ... | ${dut1_to_tg_if1_mac} | ${tg_to_dut1_if1_mac}
-| | ... | ${dut1_to_dut2_ip2} | ${tg_dut1_ip1} | 5
-
-| TC08: TG packets not routed to DUT2 ingress interface in different VRF through DUT1, VPP configured with two VRFs
-| | [Documentation]
-| | ... | [Top] TG=DUT1=DUT2=TG
-| | ... | [Enc] Eth-IPv4-ICMPv4.
-| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each
-| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces
-| | ... | are configured with IP addresses from *Variables*. On every ingress
-| | ... | and egress port on DUT is configured ARP and each DUT is configured
-| | ... | with one route.
-| | ... | [Ver] Packet is send from TG->DUT1-if1 to DUT2->DUT1-if2 where it
-| | ... | should not arrive.
-| | [Tags] | SKIP_PATCH
-| | Given Path for Double-Link 3-node testing is set
-| | ... | ${nodes['TG']} | ${nodes['DUT1']}
-| | ... | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Interfaces in Double-Link 3-node path are UP
-| | When Setup Env - 2xVRF Each Node
-| | Then Run Keyword And Expect Error | ICMP echo Rx timeout
-| | ... | Node replies to ICMP echo request
-| | ... | ${tg_node} | ${tg_to_dut1_if1}
-| | ... | ${dut1_to_tg_if1_mac} | ${tg_to_dut1_if1_mac}
-| | ... | ${dut2_to_dut1_ip2} | ${tg_dut1_ip1} | 5
-
-| TC09: TG packets not routed to DUT2 egress interface in different VRF through DUT1, VPP configured with two VRFs
-| | [Documentation]
-| | ... | [Top] TG=DUT1=DUT2=TG
-| | ... | [Enc] Eth-IPv4-ICMPv4.
-| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each
-| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces
-| | ... | are configured with IP addresses from *Variables*. On every ingress
-| | ... | and egress port on DUT is configured ARP and each DUT is configured
-| | ... | with one route.
-| | ... | [Ver] Packet is send from TG->DUT1-if1 to DUT2->TG-if2 where it
-| | ... | should not arrive.
-| | [Tags] | SKIP_PATCH
-| | Given Path for Double-Link 3-node testing is set
-| | ... | ${nodes['TG']} | ${nodes['DUT1']}
-| | ... | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Interfaces in Double-Link 3-node path are UP
-| | When Setup Env - 2xVRF Each Node
-| | Then Run Keyword And Expect Error | ICMP echo Rx timeout
-| | ... | Node replies to ICMP echo request
-| | ... | ${tg_node} | ${tg_to_dut1_if1}
-| | ... | ${dut1_to_tg_if1_mac} | ${tg_to_dut1_if1_mac}
-| | ... | ${dut2_to_tg_ip2} | ${tg_dut1_ip1} | 5
-
-| TC10: TG packets not routed to TG in different VRF through DUT1 and DUT2, VPP configured with two VRFs
-| | [Documentation]
-| | ... | [Top] TG=DUT1=DUT2=TG.
-| | ... | [Enc] Eth-IPv4-ICMPv4.
-| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each
-| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces
-| | ... | are configured with IP addresses from *Variables*. On every ingress
-| | ... | and egress port on DUT is configured ARP and each DUT is configured
-| | ... | with one route.
-| | ... | [Ver] Packet is send from TG->DUT1-if1 to TG->DUT2-if2 where it
-| | ... | should not arrive.
-| | [Tags] | SKIP_PATCH
-| | Given Path for Double-Link 3-node testing is set
-| | ... | ${nodes['TG']} | ${nodes['DUT1']}
-| | ... | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Interfaces in Double-Link 3-node path are UP
-| | When Setup Env - 2xVRF Each Node
-| | Then Run Keyword And Expect Error | ICMP echo Rx timeout
-| | ... | Send Packet And Check Headers | ${tg_node} | ${tg_dut1_ip1}
-| | ... | ${tg_dut2_ip2} | ${tg_to_dut1_if1}
-| | ... | ${tg_to_dut1_if1_mac} | ${dut1_to_tg_if1_mac} | ${tg_to_dut2_if2}
-| | ... | ${dut2_to_tg_if2_mac} | ${tg_to_dut2_if2_mac}
-
-*** Keywords ***
-| Setup Env - 2xVRF Each Node
-| | [Documentation]
-| | ... | Environment is set up with 2 fib tables on each DUT. DUT1-TG-IF1 and \
-| | ... | DUT1-DUT2-IF1 are assigned to FIB1, and DUT1-TG-IF2 and DUT1-DUT2-IF2
-| | ... | are assigned to FIB2 (the some done on DUT2, just opposite). IP
-| | ... | addresses are subsequently set on interfaces, and ARP is set for
-| | ... | neighbors. The last setting is route for each fib table.
-| | ...
-| | ${dut1_if1_idx}= | Get Interface SW Index
-| | ... | ${dut1_node} | ${dut1_to_dut2_if1}
-| | ${dut1_if2_idx}= | Get Interface SW Index
-| | ... | ${dut1_node} | ${dut1_to_dut2_if2}
-| | ${dut2_if1_idx}= | Get Interface SW Index
-| | ... | ${dut2_node} | ${dut2_to_dut1_if1}
-| | ${dut2_if2_idx}= | Get Interface SW Index
-| | ... | ${dut2_node} | ${dut2_to_dut1_if2}
-| | And Add fib table | ${dut1_node}
-| | ... | ${tg_dut2_ip1} | ${ip_prefix} | ${fib_table_1}
-| | ... | via ${dut2_to_dut1_ip1} sw_if_index ${dut1_if1_idx} multipath
-| | And Add fib table | ${dut1_node}
-| | ... | ${tg_dut2_ip2} | ${ip_prefix} | ${fib_table_2}
-| | ... | via ${dut1_to_dut2_ip2} sw_if_index ${dut1_if2_idx} multipath
-| | And Add fib table | ${dut2_node}
-| | ... | ${tg_dut1_ip1} | ${ip_prefix} | ${fib_table_1}
-| | ... | via ${dut2_to_dut1_ip1} sw_if_index ${dut2_if1_idx} multipath
-| | And Add fib table | ${dut2_node}
-| | ... | ${tg_dut1_ip2} | ${ip_prefix} | ${fib_table_2}
-| | ... | via ${dut2_to_dut1_ip2} sw_if_index ${dut2_if2_idx} multipath
-
-| | Assign Interface To Fib Table
-| | ... | ${dut1_node} | ${dut1_to_dut2_if1} | ${fib_table_1}
-| | Assign Interface To Fib Table
-| | ... | ${dut1_node} | ${dut1_to_dut2_if2} | ${fib_table_2}
-| | Assign Interface To Fib Table
-| | ... | ${dut1_node} | ${dut1_to_tg_if1} | ${fib_table_1}
-| | Assign Interface To Fib Table
-| | ... | ${dut1_node} | ${dut1_to_tg_if2} | ${fib_table_2}
-
-| | Assign Interface To Fib Table
-| | ... | ${dut2_node} | ${dut2_to_dut1_if1} | ${fib_table_1}
-| | Assign Interface To Fib Table
-| | ... | ${dut2_node} | ${dut2_to_dut1_if2} | ${fib_table_2}
-| | Assign Interface To Fib Table
-| | ... | ${dut2_node} | ${dut2_to_tg_if1} | ${fib_table_1}
-| | Assign Interface To Fib Table
-| | ... | ${dut2_node} | ${dut2_to_tg_if2} | ${fib_table_2}
-
-| | And Set Interface Address
-| | ... | ${dut1_node} | ${dut1_to_tg_if1} | ${dut1_to_tg_ip1} | ${ip_prefix}
-| | And Set Interface Address
-| | ... | ${dut1_node} | ${dut1_to_tg_if2} | ${dut1_to_tg_ip2} | ${ip_prefix}
-| | And Set Interface Address
-| | ... | ${dut1_node} | ${dut1_to_dut2_if1}
-| | ... | ${dut1_to_dut2_ip1} | ${ip_prefix}
-| | And Set Interface Address
-| | ... | ${dut1_node} | ${dut1_to_dut2_if2}
-| | ... | ${dut1_to_dut2_ip2} | ${ip_prefix}
-
-| | And Set Interface Address
-| | ... | ${dut2_node} | ${dut2_to_tg_if1} | ${dut2_to_tg_ip1} | ${ip_prefix}
-| | And Set Interface Address
-| | ... | ${dut2_node} | ${dut2_to_tg_if2} | ${dut2_to_tg_ip2} | ${ip_prefix}
-| | And Set Interface Address
-| | ... | ${dut2_node} | ${dut2_to_dut1_if1}
-| | ... | ${dut2_to_dut1_ip1} | ${ip_prefix}
-| | And Set Interface Address
-| | ... | ${dut2_node} | ${dut2_to_dut1_if2}
-| | ... | ${dut2_to_dut1_ip2} | ${ip_prefix}
-
-| | And Add Arp On Dut | ${dut1_node} | ${dut1_to_tg_if1}
-| | ... | ${tg_dut1_ip1} | ${tg_to_dut1_if1_mac} | vrf=${fib_table_1}
-| | And Add Arp On Dut | ${dut1_node} | ${dut1_to_dut2_if1}
-| | ... | ${dut2_to_dut1_ip1} | ${dut2_to_dut1_if1_mac} | vrf=${fib_table_1}
-| | And Add Arp On Dut | ${dut2_node} | ${dut2_to_tg_if1}
-| | ... | ${tg_dut2_ip1} | ${tg_to_dut2_if1_mac} | vrf=${fib_table_1}
-| | And Add Arp On Dut | ${dut2_node} | ${dut2_to_dut1_if1}
-| | ... | ${dut1_to_dut2_ip1} | ${dut1_to_dut2_if1_mac} | vrf=${fib_table_1}
-
-| | And Add Arp On Dut | ${dut1_node} | ${dut1_to_tg_if2}
-| | ... | ${tg_dut1_ip2} | ${tg_to_dut1_if2_mac} | vrf=${fib_table_2}
-| | And Add Arp On Dut | ${dut1_node} | ${dut1_to_dut2_if2}
-| | ... | ${dut2_to_dut1_ip2} | ${dut2_to_dut1_if2_mac} | vrf=${fib_table_2}
-| | And Add Arp On Dut | ${dut2_node} | ${dut2_to_tg_if2}
-| | ... | ${tg_dut2_ip2} | ${tg_to_dut2_if2_mac} | vrf=${fib_table_2}
-| | And Add Arp On Dut | ${dut2_node} | ${dut2_to_dut1_if2}
-| | ... | ${dut1_to_dut2_ip2} | ${dut1_to_dut2_if2_mac} | vrf=${fib_table_2}
-
-| | And Vpp Route Add | ${dut1_node} | ${tg_dut2_ip1} | ${ip_prefix}
-| | ... | ${dut2_to_dut1_ip1} | ${dut1_to_dut2_if1} | vrf=${fib_table_1}
-| | And Vpp Route Add | ${dut2_node} | ${tg_dut1_ip1} | ${ip_prefix}
-| | ... | ${dut1_to_dut2_ip1} | ${dut2_to_dut1_if1} | vrf=${fib_table_1}
-
-| | And Vpp Route Add | ${dut1_node} | ${tg_dut2_ip2} | ${ip_prefix}
-| | ... | ${dut2_to_dut1_ip2} | ${dut1_to_dut2_if2} | vrf=${fib_table_2}
-| | And Vpp Route Add | ${dut2_node} | ${tg_dut1_ip2} | ${ip_prefix}
-| | ... | ${dut1_to_dut2_ip2} | ${dut2_to_dut1_if2} | vrf=${fib_table_2}