aboutsummaryrefslogtreecommitdiffstats
path: root/tests/suites
diff options
context:
space:
mode:
Diffstat (limited to 'tests/suites')
-rw-r--r--tests/suites/ipv6/ipv6_iacl_untagged.robot110
-rw-r--r--tests/suites/ipv6/ipv6_ra.robot18
-rw-r--r--tests/suites/ipv6/ipv6_untagged.robot60
3 files changed, 116 insertions, 72 deletions
diff --git a/tests/suites/ipv6/ipv6_iacl_untagged.robot b/tests/suites/ipv6/ipv6_iacl_untagged.robot
index ffe9880968..e8b363373d 100644
--- a/tests/suites/ipv6/ipv6_iacl_untagged.robot
+++ b/tests/suites/ipv6/ipv6_iacl_untagged.robot
@@ -28,6 +28,17 @@
| Test Setup | Setup all DUTs before test
| Test Teardown | Run Keywords | Show packet trace on all DUTs | ${nodes}
| ... | AND | Vpp Show Errors | ${nodes['DUT1']}
+| Documentation | *IPv6 routing with ingress ACL test cases*
+| ...
+| ... | Encapsulations: Eth-IPv6 on links TG-DUT1, TG-DUT2, DUT1-DUT2. IPv6
+| ... | ingress ACL (iACL) tests use 3-node topology TG - DUT1 - DUT2 - TG with
+| ... | one link between the nodes. DUT1 and DUT2 are configured with IPv6
+| ... | routing and static routes. DUT1 is configured with iACL on link to TG,
+| ... | iACL classification and permit/deny action are configured on a per test
+| ... | case basis. Test ICMPv6 Echo Request packets are sent in one direction
+| ... | by TG on link to DUT1 and received on TG link to DUT2. On receive TG
+| ... | verifies if packets are dropped, or if received verifies packet IPv6
+| ... | src-addr, dst-addr and MAC addresses.
*** Variables ***
| ${dut1_to_tg_ip}= | 3ffe:62::1
@@ -44,10 +55,10 @@
| ${l2_table}= | l2
*** Test Cases ***
-| VPP drops packets based on IPv6 source addresses
-| | [Documentation] | Create classify table on VPP, add source IP address
-| | ... | of traffic into table and setup 'deny' traffic
-| | ... | and check if traffic is dropped.
+| TC01: DUT with iACL IPv6 src-addr drops matching pkts
+| | [Documentation]
+| | ... | On DUT1 add source IPv6 address to classify table with 'deny'.\
+| | ... | Make TG verify matching packets are dropped.
| | Given Path for 3-node testing is set
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
| | And Interfaces in 3-node path are up
@@ -89,10 +100,10 @@
| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2}
| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
-| VPP drops packets based on IPv6 destination addresses
-| | [Documentation] | Create classify table on VPP, add destination IP address
-| | ... | of traffic into table and setup 'deny' traffic
-| | ... | and check if traffic is dropped.
+| TC02: DUT with iACL IPv6 dst-addr drops matching pkts
+| | [Documentation]
+| | ... | On DUT1 add destination IPv6 address to classify table with 'deny'.\
+| | ... | Make TG verify matching packets are dropped.
| | Given Path for 3-node testing is set
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
| | And Interfaces in 3-node path are up
@@ -137,10 +148,10 @@
| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2}
| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
-| VPP drops packets based on IPv6 src-addr and dst-addr
-| | [Documentation] | Create classify table on VPP, add source and destination
-| | ... | IP address of traffic into table and setup 'deny' traffic
-| | ... | and check if traffic is dropped.
+| TC03: DUT with iACL IPv6 src-addr and dst-addr drops matching pkts
+| | [Documentation]
+| | ... | On DUT1 add source and destination IPv6 addresses to classify table\
+| | ... | with 'deny'. Make TG verify matching packets are dropped.
| | Given Path for 3-node testing is set
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
| | And Interfaces in 3-node path are up
@@ -192,10 +203,10 @@
| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2}
| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
-| VPP drops packets based on IPv6 protocol (TCP)
-| | [Documentation] | Create classify table on VPP, add mask for TCP port
-| | ... | into table and setup 'deny' traffic
-| | ... | and check if TCP traffic is dropped.
+| TC04: DUT with iACL IPv6 protocol set to TCP drops matching pkts
+| | [Documentation]
+| | ... | On DUT1 add protocol mask and TCP protocol (0x06) to classify table\
+| | ... | with 'deny'. Make TG verify matching packets are dropped.
| | Given Path for 3-node testing is set
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
| | And Interfaces in 3-node path are up
@@ -233,10 +244,10 @@
| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 80 | 20
-| VPP drops packets based on IPv6 protocol (UDP)
-| | [Documentation] | Create classify table on VPP, add mask for UDP port
-| | ... | into table and setup 'deny' traffic
-| | ... | and check if UDP traffic is dropped.
+| TC05: DUT with iACL IPv6 protocol set to UDP drops matching pkts
+| | [Documentation]
+| | ... | On DUT1 add protocol mask and UDP protocol (0x11) to classify table\
+| | ... | with 'deny'. Make TG verify matching packets are dropped.
| | Given Path for 3-node testing is set
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
| | And Interfaces in 3-node path are up
@@ -274,10 +285,10 @@
| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 80 | 20
-| VPP drops packets based on IPv6 TCP src ports
-| | [Documentation] | Create classify table on VPP, add source IP address
-| | ... | of traffic into table and setup 'deny' traffic
-| | ... | and check if traffic is dropped.
+| TC06: DUT with iACL IPv6 TCP src-ports drops matching pkts
+| | [Documentation]
+| | ... | On DUT1 add TCP source ports to classify table with 'deny'.\
+| | ... | Make TG verify matching packets are dropped.
| | Given Path for 3-node testing is set
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
| | And Interfaces in 3-node path are up
@@ -316,10 +327,10 @@
| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 110 | 20
-| VPP drops packets based on IPv6 TCP dst ports
-| | [Documentation] | Create classify table on VPP, add destination TCP port
-| | ... | of traffic into table and setup 'deny' traffic
-| | ... | and check if traffic is dropped.
+| TC07: DUT with iACL IPv6 TCP dst-ports drops matching pkts
+| | [Documentation]
+| | ... | On DUT1 add TCP destination ports to classify table with 'deny'.\
+| | ... | Make TG verify matching packets are dropped.
| | Given Path for 3-node testing is set
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
| | And Interfaces in 3-node path are up
@@ -358,10 +369,10 @@
| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 20 | 110
-| VPP drops packets based on IPv6 TCP src + dst ports
-| | [Documentation] | Create classify table on VPP, add source and destination
-| | ... | TCP port of traffic into table and setup 'deny' traffic
-| | ... | and check if traffic is dropped.
+| TC08: DUT with iACL IPv6 TCP src-ports and dst-ports drops matching pkts
+| | [Documentation]
+| | ... | On DUT1 add TCP source and destination ports to classify table\
+| | ... | with 'deny'. Make TG verify matching packets are dropped.
| | Given Path for 3-node testing is set
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
| | And Interfaces in 3-node path are up
@@ -401,10 +412,10 @@
| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 110 | 25
-| VPP drops packets based on IPv6 UDP src ports
-| | [Documentation] | Create classify table on VPP, add source UDP port
-| | ... | of traffic into table and setup 'deny' traffic
-| | ... | and check if traffic is dropped.
+| TC09: DUT with iACL IPv6 UDP src-ports drops matching pkts
+| | [Documentation]
+| | ... | On DUT1 add UDP source ports to classify table with 'deny'.\
+| | ... | Make TG verify matching packets are dropped.
| | Given Path for 3-node testing is set
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
| | And Interfaces in 3-node path are up
@@ -443,10 +454,10 @@
| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 110 | 20
-| VPP drops packets based on IPv6 UDP dst ports
-| | [Documentation] | Create classify table on VPP, add destination UDP port
-| | ... | of traffic into table and setup 'deny' traffic
-| | ... | and check if traffic is dropped.
+| TC10: DUT with iACL IPv6 UDP dst-ports drops matching pkts
+| | [Documentation]
+| | ... | On DUT1 add TCP destination ports to classify table with 'deny'.\
+| | ... | Make TG verify matching packets are dropped.
| | Given Path for 3-node testing is set
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
| | And Interfaces in 3-node path are up
@@ -485,10 +496,10 @@
| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 20 | 110
-| VPP drops packets based on IPv6 UDP src + dst ports
-| | [Documentation] | Create classify table on VPP, add source and destination
-| | ... | UDP port of traffic into table and setup 'deny' traffic
-| | ... | and check if traffic is dropped.
+| TC11: DUT with iACL IPv6 UDP src-ports and dst-ports drops matching pkts
+| | [Documentation]
+| | ... | On DUT1 add UDP source and destination ports to classify table\
+| | ... | with 'deny'. Make TG verify matching packets are dropped.
| | Given Path for 3-node testing is set
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
| | And Interfaces in 3-node path are up
@@ -528,12 +539,11 @@
| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 110 | 25
-| VPP can drop packets based on src MAC + IPv6 UDP src+dst port
-| | [Documentation] | Create first classify table on VPP, for source MAC address
-| | ... | filtering and second classify table for IPv6 UDP source
-| | ... | and destination port filtering. Add MAC address and UDP
-| | ... | ports into table and set 'deny' traffic.
-| | ... | Check if traffic is dropped.
+| TC12: DUT with iACL MAC src-addr and iACL IPv6 UDP src-ports and dst-ports drops matching pkts
+| | [Documentation]
+| | ... | On DUT1 add source MAC address to classify (L2) table and add UDP\
+| | ... | source and destination ports to classify (hex) table with 'deny'.
+| | ... | Make TG verify matching packets are dropped.
| | Given Path for 3-node testing is set
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
| | And Interfaces in 3-node path are up
diff --git a/tests/suites/ipv6/ipv6_ra.robot b/tests/suites/ipv6/ipv6_ra.robot
index 9ce824d807..f5272011d3 100644
--- a/tests/suites/ipv6/ipv6_ra.robot
+++ b/tests/suites/ipv6/ipv6_ra.robot
@@ -27,11 +27,12 @@
| ... | AND | Update All Interface Data On All Nodes | ${nodes}
| Test Setup | Setup all DUTs before test
| Test Teardown | Show packet trace on all DUTs | ${nodes}
-| Documentation | *Router advertisement tests.*
+| Documentation | *IPv6 Router Advertisement test cases*
| ...
-| ... | Test suite uses 3-node topology TG - DUT1 - DUT2 - TG
-| ... | with one link between nodes where Router advertisement functionality is
-| ... | tested in following test cases.
+| ... | RFC4861 Neighbor Discovery. Encapsulations: Eth-IPv6-RA on links
+| ... | TG-DUT1. IPv6 Router Advertisement tests use 3-node topology TG - DUT1 -
+| ... | DUT2 - TG with one link between the nodes. DUT1 and DUT2 are configured
+| ... | with IPv6 routing and static routes. TG verifies received RA packets.
*** Variables ***
@@ -39,10 +40,11 @@
| ${prefix_length}= | 64
*** Test Cases ***
-| VPP transmits RA from IPv6 enabled interface
-| | [Documentation] | Setup IPv6 interace and wait for router advertisement \
-| | ... | packet from this interface to be sent. Subsequently, \
-| | ... | check received packet for correct contents.
+| TC01: DUT transmits RA on IPv6 enabled interface
+| | [Documentation]
+| | ... | On DUT1 configure IPv6 interface on the link to TG. Make TG wait\
+| | ... | for IPv6 Router Advertisement packet to be sent out by DUT1 and
+| | ... | verify the received RA packet is correct.
| | Given Path for 3-node testing is set
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
| | And Interfaces in 3-node path are up
diff --git a/tests/suites/ipv6/ipv6_untagged.robot b/tests/suites/ipv6/ipv6_untagged.robot
index d67d1e35fc..adc74ae88f 100644
--- a/tests/suites/ipv6/ipv6_untagged.robot
+++ b/tests/suites/ipv6/ipv6_untagged.robot
@@ -11,10 +11,7 @@
# See the License for the specific language governing permissions and
# limitations under the License.
-"""IPv6 untagged test suite"""
-
*** Settings ***
-| Documentation | IPv6 untagged test suite
| Library | resources.libraries.python.Trace
| Resource | resources/libraries/robot/interfaces.robot
| Resource | resources/libraries/robot/ipv6.robot
@@ -28,21 +25,40 @@
| ... | AND | Setup all TGs before traffic script
| Test Setup | Clear interface counters on all vpp nodes in topology | ${nodes}
| Test Teardown | Run Keyword If Test Failed | Show packet trace on all DUTs | ${nodes}
+| Documentation | *IPv6 routing test cases*
+| ...
+| ... | RFC2460 IPv6, RFC4443 ICMPv6, RFC4861 Neighbor Discovery.
+| ... | Encapsulations: Eth-IPv6-ICMPv6 on links TG-DUT1, TG-DUT2, DUT1-DUT2;
+| ... | Eth-IPv6-NS/NA on links TG-DUT. IPv6 routing tests use circular 3-node
+| ... | topology TG - DUT1 - DUT2 - TG with one link between the nodes. DUT1 and
+| ... | DUT2 are configured with IPv6 routing and static routes. Test ICMPv6
+| ... | Echo Request packets are sent in both directions by TG on links to DUT1
+| ... | and DUT2 and received on TG links on the other side of circular
+| ... | topology. On receive TG verifies packets IPv6 src-addr, dst-addr and MAC
+| ... | addresses.
*** Test Cases ***
-| VPP replies to ICMPv6 echo request
+| TC01: DUT replies to ICMPv6 Echo Req to its ingress interface
+| | [Documentation]
+| | ... | Make TG send ICMPv6 Echo Req to DUT ingress interface. Make TG\
+| | ... | verify ICMPv6 Echo Reply is correct.
| | [Tags] | 3_NODE_SINGLE_LINK_TOPO | VM_ENV
| | Ipv6 icmp echo | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes_ipv6_addr}
-| VPP can process ICMPv6 echo request from min to 1500B packet size with 1B increment
+| TC02: DUT replies to ICMPv6 Echo Req pkt with size 64B-to-1500B-incr-1B
+| | [Documentation]
+| | ... | Make TG send ICMPv6 Echo Reqs to DUT ingress interface,\
+| | ... | incrementating frame size from 64B to 1500B with increment step
+| | ... | of 1Byte. Make TG verify ICMP Echo Replies are correct.
| | [Tags] | 3_NODE_SINGLE_LINK_TOPO | VM_ENV
| | Ipv6 icmp echo sweep | ${nodes['TG']} | ${nodes['DUT1']} | 0 | 1452 | 1 | ${nodes_ipv6_addr}
-| VPP can process ICMPv6 echo request from 1500B to max packet size with 10B increment
+| TC03: DUT replies to ICMPv6 Echo Req pkt with size 1500B-to-9000B-incr-10B
+| | [Documentation]
+| | ... | Make TG send ICMPv6 Echo Reqs to DUT ingress interface,\
+| | ... | incrementating frame size from 1500B to 9000B with increment
+| | ... | step of 10Bytes. Make TG verify ICMPv6 Echo Replies are correct.
| | [Tags] | 3_NODE_SINGLE_LINK_TOPO
-| | [Documentation] | This test case cannot be run reliably on VM_ENV because
-| | ... | the virtual hosts can be connected using a bridge which
-| | ... | has its own MTU
| | [Setup] | Setup MTU on TG based on MTU on DUT | ${nodes['TG']} | ${nodes['DUT1']}
| | [Teardown] | Set default Ethernet MTU on all interfaces on node | ${nodes['TG']}
| | Append Nodes | ${nodes['TG']} | ${nodes['DUT1']}
@@ -56,26 +72,42 @@
| | ... | Ipv6 icmp echo sweep | ${nodes['TG']} | ${nodes['DUT1']}
| | ... | 1452 | ${end_size} | 10 | ${nodes_ipv6_addr}
-| TG can route to first DUT egress interface
+| TC04: DUT routes to its egress interface
+| | [Documentation]
+| | ... | Make TG send ICMPv6 Echo Req towards DUT1 egress interface\
+| | ... | connected to DUT2. Make TG verify ICMPv6 Echo Reply is correct.
| | [Tags] | 3_NODE_SINGLE_LINK_TOPO | VM_ENV
| | Ipv6 tg to dut1 egress | ${nodes['TG']} | ${nodes['DUT1']} |
| | ... | ${nodes['DUT2']} | ${nodes_ipv6_addr}
-| TG can route to second DUT through first DUT
+| TC05: DUT1 routes to DUT2 ingress interface
+| | [Documentation]
+| | ... | Make TG send ICMPv6 Echo Req towards DUT2 ingress interface\
+| | ... | connected to DUT1. Make TG verify ICMPv6 Echo Reply is correct.
| | [Tags] | 3_NODE_SINGLE_LINK_TOPO | VM_ENV
| | Ipv6 tg to dut2 via dut1 | ${nodes['TG']} | ${nodes['DUT1']}
| | ... | ${nodes['DUT2']} | ${nodes_ipv6_addr}
-| TG can route to second DUT egress interface through first DUT
+| TC06: DUT1 routes to DUT2 egress interface
+| | [Documentation]
+| | ... | Make TG send ICMPv6 Echo Req towards DUT2 egress interface\
+| | ... | connected to TG. Make TG verify ICMPv6 Echo Reply is correct.
| | [Tags] | 3_NODE_SINGLE_LINK_TOPO | VM_ENV
| | Ipv6 tg to dut2 egress via dut1 | ${nodes['TG']} | ${nodes['DUT1']}
| | ... | ${nodes['DUT2']} | ${nodes_ipv6_addr}
-| TG can route to TG through first and second DUT
+| TC07: DUT1 and DUT2 route between TG interfaces
+| | [Documentation]
+| | ... | Make TG send ICMPv6 Echo Req between its interfaces across DUT1\
+| | ... | and DUT2. Make TG verify ICMPv6 Echo Replies are correct.
| | [Tags] | 3_NODE_SINGLE_LINK_TOPO | VM_ENV
| | Ipv6 tg to tg routed | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']}
| | ... | ${nodes_ipv6_addr}
-| VPP replies to IPv6 Neighbor Solicitation
+| TC08: DUT replies to IPv6 Neighbor Solicitation
+| | [Documentation]
+| | ... | On DUT configure interface IPv6 address in the main routing\
+| | ... | domain. Make TG send Neighbor Solicitation message on the link
+| | ... | to DUT and verify DUT Neighbor Advertisement reply is correct.
| | [Tags] | 3_NODE_SINGLE_LINK_TOPO | VM_ENV
| | Ipv6 neighbor solicitation | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes_ipv6_addr}