diff options
Diffstat (limited to 'tests/vpp/device/container_memif/eth2p-eth-l2bdbasemaclrn-eth-2memif-1dcr-dev.robot')
| -rw-r--r-- | tests/vpp/device/container_memif/eth2p-eth-l2bdbasemaclrn-eth-2memif-1dcr-dev.robot | 114 |
1 files changed, 114 insertions, 0 deletions
diff --git a/tests/vpp/device/container_memif/eth2p-eth-l2bdbasemaclrn-eth-2memif-1dcr-dev.robot b/tests/vpp/device/container_memif/eth2p-eth-l2bdbasemaclrn-eth-2memif-1dcr-dev.robot new file mode 100644 index 0000000000..0131aafab4 --- /dev/null +++ b/tests/vpp/device/container_memif/eth2p-eth-l2bdbasemaclrn-eth-2memif-1dcr-dev.robot @@ -0,0 +1,114 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/l2/l2_bridge_domain.robot +| Resource | resources/libraries/robot/l2/l2_traffic.robot +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/shared/memif.robot +| Resource | resources/libraries/robot/shared/testing_path.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV +| ... | FUNCTEST | L2BDMACLRN | BASE | ETH | MEMIF | DOCKER +| ... +| Test Setup | Set up VPP device test +| ... +| Test Teardown | Run Keywords +| ... | Tear down functional test with container +| ... | AND | Tear down VPP device test +| ... | AND | Show Memif on all DUTs | ${nodes} +| ... +| Documentation | *L2 bridge-domain test cases with memif interface* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for L2 switching of \ +| ... | IPv4; Eth-IPv6-ICMPv6 for L2 switching of IPv6 use. Both apply to all \ +| ... | links. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-domain \ +| ... | switching. Container is connected to VPP via Memif interface. \ +| ... | Container is running same VPP version as running on DUT. +| ... | *[Ver] TG verification:* Test ICMPv4 (or ICMPv6) Echo Request packets \ +| ... | are sent in both directions by TG on links to DUT1 and via container; \ +| ... | on receive TG verifies packets for correctness and their IPv4 (IPv6) \ +| ... | src-addr, dst-addr and MAC addresses.pecifications:* RFC792 + +*** Variables *** +# L2BD +| ${bd_id1}= | 1 +| ${bd_id2}= | 2 +# Memif +| ${sock_base}= | memif-DUT1_CNF1 +# Container +| ${container_engine}= | Docker +| ${container_chain_topology}= | chain_functional + +# TODO: Add update of VPP PIDs after container creation +*** Test Cases *** +| tc01-eth2p-ethip4-l2bdbase-eth-2memif-1dcr-device +| | [Documentation] +| | ... | [Top] TG=DUT=DCR. [Enc] Eth-IPv4-ICMPv4. [Cfg] Configure two \ +| | ... | L2 bridge-domains (L2BD) with MAC learning enabled on DUT1, each \ +| | ... | with one untagged interface to TG and untagged i/f to docker over \ +| | ... | memif. [Ver] Make TG send ICMPv4 Echo Req in both directions between \ +| | ... | two of its interfaces to be switched by DUT1; verify all packets are \ +| | ... | received. +| | ... +| | Given Configure path in 2-node circular topology +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} +| | And Set up functional test with containers +| | And Configure interfaces in path up +| | When Set up memif interfaces on DUT node | ${dut_node} | ${sock_base} +| | ... | ${sock_base} | dcr_uuid=${dcr_uuid} +| | ... | memif_if1=memif_if1 | memif_if2=memif_if2 | rxq=${0} | txq=${0} +| | And Create bridge domain | ${dut_node} | ${bd_id1} +| | And Add interface to bridge domain | ${dut_node} | ${dut_to_tg_if1} +| | ... | ${bd_id1} +| | And Add interface to bridge domain | ${dut_node} | ${memif_if1} +| | ... | ${bd_id1} +| | And Create bridge domain | ${dut_node} | ${bd_id2} +| | And Add interface to bridge domain | ${dut_node} | ${dut_to_tg_if2} +| | ... | ${bd_id2} +| | And Add interface to bridge domain | ${dut_node} | ${memif_if2} +| | ... | ${bd_id2} +| | Then Send ICMPv4 bidirectionally and verify received packets | ${tg_node} +| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if2} + +| tc02-eth2p-ethip6-l2bdbase-eth-2memif-1dcr-device +| | [Documentation] +| | ... | [Top] TG=DUT=DCR. [Enc] Eth-IPv6-ICMPv6. [Cfg] Configure two \ +| | ... | L2 bridge-domains (L2BD) with MAC learning enabled on DUT1, each \ +| | ... | with one untagged interface to TG and untagged i/f to docker over \ +| | ... | memif. [Ver] Make TG send ICMPv4 Echo Req in both directions between \ +| | ... | two of its interfaces to be switched by DUT1; verify all packets are \ +| | ... | received. +| | ... +| | Given Configure path in 2-node circular topology +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} +| | And Set up functional test with containers +| | And Configure interfaces in path up +| | When Set up memif interfaces on DUT node | ${dut_node} | ${sock_base} +| | ... | ${sock_base} | dcr_uuid=${dcr_uuid} +| | ... | memif_if1=memif_if1 | memif_if2=memif_if2 | rxq=${0} | txq=${0} +| | And Create bridge domain | ${dut_node} | ${bd_id1} +| | And Add interface to bridge domain | ${dut_node} | ${dut_to_tg_if1} +| | ... | ${bd_id1} +| | And Add interface to bridge domain | ${dut_node} | ${memif_if1} +| | ... | ${bd_id1} +| | And Create bridge domain | ${dut_node} | ${bd_id2} +| | And Add interface to bridge domain | ${dut_node} | ${dut_to_tg_if2} +| | ... | ${bd_id2} +| | And Add interface to bridge domain | ${dut_node} | ${memif_if2} +| | ... | ${bd_id2} +| | Then Send ICMPv6 bidirectionally and verify received packets +| | ... | ${tg_node} | ${tg_to_dut_if1} | ${tg_to_dut_if2} |