aboutsummaryrefslogtreecommitdiffstats
path: root/tests/vpp/device/container_memif/eth2p-ethipv6-ip6base-eth-2memif-1dcr-dev.robot
diff options
context:
space:
mode:
Diffstat (limited to 'tests/vpp/device/container_memif/eth2p-ethipv6-ip6base-eth-2memif-1dcr-dev.robot')
-rw-r--r--tests/vpp/device/container_memif/eth2p-ethipv6-ip6base-eth-2memif-1dcr-dev.robot113
1 files changed, 113 insertions, 0 deletions
diff --git a/tests/vpp/device/container_memif/eth2p-ethipv6-ip6base-eth-2memif-1dcr-dev.robot b/tests/vpp/device/container_memif/eth2p-ethipv6-ip6base-eth-2memif-1dcr-dev.robot
new file mode 100644
index 0000000000..dd74b2166b
--- /dev/null
+++ b/tests/vpp/device/container_memif/eth2p-ethipv6-ip6base-eth-2memif-1dcr-dev.robot
@@ -0,0 +1,113 @@
+# Copyright (c) 2019 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| ...
+| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
+| ... | NIC_Virtual | ETH | IP6FWD | BASE | MEMIF | DOCKER | DRV_VFIO_PCI
+| ...
+| Suite Setup | Setup suite single link | scapy
+| Test Setup | Setup test
+| Test Teardown | Tear down test | packet_trace | container
+| ...
+| Test Template | Local Template
+| ...
+| Documentation | *IPv4 routing test cases with memif interface*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with \
+| ... | single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing on \
+| ... | both links.
+| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6 routing and \
+| ... | two static IPv6 /64 route entries. Container is connected to VPP via \
+| ... | Memif interface. Container is running same VPP version as running on \
+| ... | DUT.
+| ... | *[Ver] TG verification:* Test IPv6 packets are sent in one direction \
+| ... | by TG on links to DUT1 and via container; on receive TG verifies \
+| ... | packets for correctness and their IPv6 src-addr, dst-addr and \
+| ... | MAC addresses.
+| ... | *[Ref] Applicable standard specifications:* RFC791, RFC826, RFC792
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
+| ${crypto_type}= | ${None}
+| ${nic_name}= | virtual
+| ${nic_driver}= | vfio-pci
+| ${overhead}= | ${0}
+# Container
+| ${container_engine}= | Docker
+| ${container_chain_topology}= | chain_functional
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Ver] Make TG send IPv6 packets in both directions between two\
+| | ... | of its interfaces to be routed by DUT to and from docker; verify\
+| | ... | all packets are received.
+| | ...
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer. Type: integer
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| | ...
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| | ...
+| | Set Test Variable | \${frame_size}
+| | ...
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
+| | And Start containers for test | auto_scale=${False} | pinning=${False}
+| | And Set interfaces in path up
+| | And Set up memif interfaces on DUT node
+| | ... | ${dut1} | memif-DUT1_CNF | memif-DUT1_CNF
+| | ... | memif_if1=memif_if1 | memif_if2=memif_if2
+| | ... | rxq=${rxq_count_int} | txq=${rxq_count_int}
+| | And Add Fib Table | ${dut1} | 20 | ipv6=${True}
+| | And Assign Interface To Fib Table
+| | ... | ${dut1} | ${memif_if2} | 20 | ipv6=${True}
+| | And Assign Interface To Fib Table
+| | ... | ${dut1} | ${dut1_if2} | 20 | ipv6=${True}
+| | And VPP Interface Set IP Address
+| | ... | ${dut1} | ${dut1_if1} | 2001:1::1 | 64
+| | And VPP Interface Set IP Address
+| | ... | ${dut1} | ${memif_if1} | 2001:2::1 | 64
+| | And VPP Interface Set IP Address
+| | ... | ${dut1} | ${memif_if2} | 2001:2::2 | 64
+| | And VPP Interface Set IP Address
+| | ... | ${dut1} | ${dut1_if2} | 2001:3::1 | 64
+| | ${memif_if2_key}= | Get interface by sw index | ${nodes['DUT1']}
+| | ... | ${memif_if2}
+| | ${memif_if2_mac}= | Get interface MAC | ${nodes['DUT1']} | ${memif_if2_key}
+| | And Vpp Route Add
+| | ... | ${dut1} | 2001:3::0 | 64 | gateway=2001:2::2 | interface=${memif_if1}
+| | And Vpp Route Add
+| | ... | ${dut1} | 2001:1::0 | 64 | gateway=2001:2::2 | interface=${memif_if2}
+| | ... | vrf=20
+| | VPP Add IP Neighbor
+| | ... | ${dut1} | ${memif_if1} | 2001:2::2 | ${memif_if2_mac}
+| | VPP Add IP Neighbor
+| | ... | ${dut1} | ${dut1_if2} | 2001:3::2 | ${tg_if2_mac}
+| | Then Send packet and verify headers
+| | ... | ${tg} | 2001:1::1 | 2001:3::2
+| | ... | ${tg_if1} | ${tg_if1_mac} | ${dut1_if1_mac}
+| | ... | ${tg_if2} | ${dut1_if2_mac} | ${tg_if2_mac}
+
+*** Test Cases ***
+| tc01-78B-ethipv6-ip6base-eth-2memif-1dcr-dev
+| | [Tags] | 78B
+| | frame_size=${78} | phy_cores=${0}