diff options
Diffstat (limited to 'tests/vpp/device/crypto/ethip4')
5 files changed, 429 insertions, 0 deletions
diff --git a/tests/vpp/device/crypto/ethip4/2n1l-10ge2p1x710-ethip4ipsec11tnlsw-ip4base-int-aes128cbc-hmac512sha-scapy.robot b/tests/vpp/device/crypto/ethip4/2n1l-10ge2p1x710-ethip4ipsec11tnlsw-ip4base-int-aes128cbc-hmac512sha-scapy.robot new file mode 100644 index 0000000000..c7bbd680a5 --- /dev/null +++ b/tests/vpp/device/crypto/ethip4/2n1l-10ge2p1x710-ethip4ipsec11tnlsw-ip4base-int-aes128cbc-hmac512sha-scapy.robot @@ -0,0 +1,102 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY +| ... | NIC_Intel-X710 | IP4FWD | IPSEC | IPSECSW | IPSECINT | IP4BASE +| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec11tnlsw-ip4base-int-aes128cbc-hmac512sha +| +| Suite Setup | Setup suite topology interfaces | scapy +| Test Setup | Setup test +| Test Teardown | Tear down test | packet_trace | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *IPv4 IPsec tunnel mode test suite.* +| +| ... | *[Top] Network topologies:* TG-DUT1 2-node topology with one link\ +| ... | between nodes. +| ... | *[Cfg] DUT configuration:* On DUT1 create loopback interface, configure\ +| ... | loopback an physical interface IPv4 addresses, static ARP record, route\ +| ... | and IPsec manual keyed connection in tunnel mode. +| ... | *[Ver] TG verification:* ETH-IP4 packet is sent from TG to DUT1. Packet\ +| ... | is received on TG from DUT1. +| ... | *[Ref] Applicable standard specifications:* RFC4303. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | crypto_ipsecmb_plugin.so +| ... | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${overhead}= | ${90} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${11} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] On DUT1 configure IPsec tunnel interfaces with encryption\ +| | ... | algorithm AES_128_CBC and integrity algorithm HMAC_SHA_512 in tunnel\ +| | ... | mode. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer. Type: integer +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg} = | Crypto Alg AES CBC 128 +| | ${auth_alg} = | Integ Alg SHA 512 256 +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs | with_trace=${True} +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | ${encr_keys} | ${auth_keys} | ${dut_spi} | ${tg_spi} = +| | ... | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | return_keys=${True} +| | Then Send IP Packet and verify ESP encapsulation in received packet +| | ... | ${tg} | ${TG_pf1}[0] | ${TG_pf2}[0] | ${DUT1_${int}1_mac}[0] +| | ... | ${DUT1_${int}2_mac}[0] | ${encr_alg} | ${encr_keys}[0] | ${auth_alg} +| | ... | ${auth_keys}[0] | ${dut_spi} | ${tg_spi} | ${laddr_ip4} | ${raddr_ip4} +| | ... | ${tun_if1_ip4} | ${tun_if2_ip4} + +*** Test Cases *** +| 64B-0c-ethip4ipsec11tnlsw-ip4base-int-aes128cbc-hmac512sha-scapy +| | [Tags] | 64B | 0C +| | frame_size=${64} | phy_cores=${0} diff --git a/tests/vpp/device/crypto/ethip4/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-scapy.robot b/tests/vpp/device/crypto/ethip4/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-scapy.robot new file mode 100644 index 0000000000..1feade375e --- /dev/null +++ b/tests/vpp/device/crypto/ethip4/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-scapy.robot @@ -0,0 +1,103 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY +| ... | NIC_Intel-X710 | IP4FWD | IPSEC | IPSECSW | IPSECINT | IP4BASE +| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha +| +| Suite Setup | Setup suite topology interfaces | scapy +| Test Setup | Setup test +| Test Teardown | Tear down test | packet_trace | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *IPv4 IPsec tunnel mode test suite.* +| +| ... | *[Top] Network topologies:* TG-DUT1 2-node topology with one link\ +| ... | between nodes. +| ... | *[Cfg] DUT configuration:* On DUT1 create loopback interface, configure\ +| ... | loopback an physical interface IPv4 addresses, static ARP record, route\ +| ... | and IPsec manual keyed connection in tunnel mode. +| ... | *[Ver] TG verification:* ETH-IP4 packet is sent from TG to DUT1. Packet\ +| ... | is received on TG from DUT1. +| ... | *[Ref] Applicable standard specifications:* RFC4303. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | crypto_ipsecmb_plugin.so +| ... | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${overhead}= | ${90} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] On DUT1 configure IPsec tunnel interface with encryption\ +| | ... | algorithm AES_128_CBC and integrity algorithm HMAC_SHA_512 in tunnel\ +| | ... | mode. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer. Type: integer +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg} = | Crypto Alg AES CBC 128 +| | ${auth_alg} = | Integ Alg SHA 512 256 +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs | with_trace=${True} +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | ${encr_keys} | ${auth_keys} | ${dut_spi} | ${tg_spi} = +| | ... | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | return_keys=${True} +| | Then Send IP Packet and verify ESP encapsulation in received packet +| | ... | ${tg} | ${TG_pf1}[0] | ${TG_pf2}[0] | ${DUT1_${int}1_mac}[0] +| | ... | ${DUT1_${int}2_mac}[0] | ${encr_alg} | ${encr_keys}[0] | ${auth_alg} +| | ... | ${auth_keys}[0] | ${dut_spi} | ${tg_spi} | ${laddr_ip4} | ${raddr_ip4} +| | ... | ${tun_if1_ip4} | ${tun_if2_ip4} +| | And Show Ipsec Security Association | ${dut1} + +*** Test Cases *** +| 64B-0c-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-scapy +| | [Tags] | 64B | 0C +| | frame_size=${64} | phy_cores=${0} diff --git a/tests/vpp/device/crypto/ethip4/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes128cbc-hmac512sha-scapy.robot b/tests/vpp/device/crypto/ethip4/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes128cbc-hmac512sha-scapy.robot new file mode 100644 index 0000000000..163e58900d --- /dev/null +++ b/tests/vpp/device/crypto/ethip4/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes128cbc-hmac512sha-scapy.robot @@ -0,0 +1,104 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY +| ... | NIC_Intel-X710 | IP4FWD | IPSEC | IPSECSW | IPSECTUN | IP4BASE +| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec1tnlsw-ip4base-policy-aes128cbc-hmac512sha +| +| Suite Setup | Setup suite topology interfaces | scapy +| Test Setup | Setup test +| Test Teardown | Tear down test | packet_trace | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *IPv4 IPsec tunnel mode test suite.* +| +| ... | *[Top] Network topologies:* TG-DUT1 2-node topology with one link\ +| ... | between nodes. +| ... | *[Cfg] DUT configuration:* On DUT1 create loopback interface, configure\ +| ... | loopback an physical interface IPv4 addresses, static ARP record, route\ +| ... | and IPsec manual keyed connection in tunnel mode. +| ... | *[Ver] TG verification:* ESP packet is sent from TG to DUT1. ESP packet\ +| ... | is received on TG from DUT1. +| ... | *[Ref] Applicable standard specifications:* RFC4303. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | crypto_ipsecmb_plugin.so +| ... | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${overhead}= | ${54} +| ${tg_spi}= | ${1000} +| ${dut_spi}= | ${1001} +| ${ESP_PROTO}= | ${50} +| ${tg_if1_ip4}= | 192.168.100.2 +| ${tg_if2_ip4}= | 192.168.4.4 +| ${dut_if1_ip4}= | 192.168.100.3 +| ${dut_if2_ip4}= | 192.168.4.3 +| ${tg_host_ip4}= | 192.168.3.3 +| ${ip4_plen}= | ${24} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES_128_CBC and integrity algorithm HMAC_SHA_512 in tunnel\ +| | ... | mode. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer. Type: integer +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 512 256 +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs | with_trace=${True} +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Configure topology for IPv4 IPsec testing +| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | And Configure manual keyed connection for IPSec +| | ... | ${dut1} | ${DUT1_${int}1}[0] | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${tg_dst_ip} | ${tg_src_ip} +| | ... | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg} | ${TG_pf1}[0] | ${TG_pf2}[0] +| | ... | ${DUT1_vf1_mac}[0] | ${DUT1_vf2_mac}[0] +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${tg_dst_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} + +*** Test Cases *** +| 64B-0c-ethip4ipsec1tnlsw-ip4base-policy-aes128cbc-hmac512sha-scapy +| | [Tags] | 64B | 0C +| | frame_size=${64} | phy_cores=${0} diff --git a/tests/vpp/device/crypto/ethip4/2n1l-10ge2p1x710-ethip4ipsec1tptsw-ip4base-policy-aes128cbc-hmac512sha-scapy.robot b/tests/vpp/device/crypto/ethip4/2n1l-10ge2p1x710-ethip4ipsec1tptsw-ip4base-policy-aes128cbc-hmac512sha-scapy.robot new file mode 100644 index 0000000000..012d2297b6 --- /dev/null +++ b/tests/vpp/device/crypto/ethip4/2n1l-10ge2p1x710-ethip4ipsec1tptsw-ip4base-policy-aes128cbc-hmac512sha-scapy.robot @@ -0,0 +1,102 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY +| ... | NIC_Intel-X710 | IP4FWD | IPSEC | IPSECSW | IPSECTPT | IP4BASE +| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec1tptsw-ip4base-policy-aes128cbc-hmac512sha +| +| Suite Setup | Setup suite topology interfaces | scapy +| Test Setup | Setup test +| Test Teardown | Tear down test | packet_trace | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *IPv4 IPsec transport mode test suite.* +| +| ... | *[Top] Network topologies:* TG-DUT1 2-node topology with one link\ +| ... | between nodes. +| ... | *[Cfg] DUT configuration:* On DUT1 create loopback interface, configure\ +| ... | loopback an physical interface IPv4 addresses, static ARP record, route\ +| ... | and IPsec manual keyed connection in transport mode. +| ... | *[Ver] TG verification:* ESP packet is sent from TG to DUT1. ESP packet\ +| ... | is received on TG from DUT1. +| ... | *[Ref] Applicable standard specifications:* RFC4303. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | crypto_ipsecmb_plugin.so +| ... | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${overhead}= | ${54} +| ${tg_spi}= | ${1000} +| ${dut_spi}= | ${1001} +| ${ESP_PROTO}= | ${50} +| ${tg_if1_ip4}= | 192.168.100.2 +| ${tg_if2_ip4}= | 192.168.4.4 +| ${dut_if1_ip4}= | 192.168.100.3 +| ${dut_if2_ip4}= | 192.168.4.3 +| ${tg_host_ip4}= | 192.168.3.3 +| ${ip4_plen}= | ${24} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES_128_CBC and integrity algorithm HMAC_SHA_512 in\ +| | ... | transport mode. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer. Type: integer +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 512 256 +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs | with_trace=${True} +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Configure topology for IPv4 IPsec testing +| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | And Configure manual keyed connection for IPSec +| | ... | ${dut1} | ${DUT1_${int}1}[0] | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${tg_dst_ip} | ${tg_src_ip} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg} | ${TG_pf1}[0] | ${TG_pf2}[0] +| | ... | ${DUT1_vf1_mac}[0] | ${DUT1_vf2_mac}[0] +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${tg_dst_ip} + +*** Test Cases *** +| 64B-0c-ethip4ipsec1tptsw-ip4base-policy-aes128cbc-hmac512sha-scapy +| | [Tags] | 64B | 0C +| | frame_size=${64} | phy_cores=${0} diff --git a/tests/vpp/device/crypto/ethip4/regenerate_testcases.py b/tests/vpp/device/crypto/ethip4/regenerate_testcases.py new file mode 100755 index 0000000000..87521e662d --- /dev/null +++ b/tests/vpp/device/crypto/ethip4/regenerate_testcases.py @@ -0,0 +1,18 @@ +#!/usr/bin/env python3 + +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +from resources.libraries.python.autogen.Regenerator import Regenerator + +Regenerator().regenerate_glob(u"*.robot") |