diff options
Diffstat (limited to 'tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-gtpu-scapy.robot')
| -rw-r--r-- | tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-gtpu-scapy.robot | 123 |
1 files changed, 123 insertions, 0 deletions
diff --git a/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-gtpu-scapy.robot b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-gtpu-scapy.robot new file mode 100644 index 0000000000..0b8e44ade6 --- /dev/null +++ b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-gtpu-scapy.robot @@ -0,0 +1,123 @@ +# Copyright (c) 2021 Intel and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY +| ... | NIC_Intel-X710 | ETH | IP4FWD | FLOW | GTPU | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4-flow-ip4-gtpu +| +| Suite Setup | Setup suite topology interfaces | scapy +| Test Setup | Setup test +| Test Teardown | Tear down test | packet_trace | telemetry +| +| Test Template | Local Template +| +| Documentation | *IP4_GTPU flow test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1 2-node topology with one link\ +| ... | between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IP4-GTPU. +| ... | *[Cfg] DUT configuration:* DUT is configured with IP4_GTPU flow. +| ... | *[Ver] TG verification:* Verify if the flow action is correct. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${overhead}= | ${0} +| ${src_ip}= | 1.1.1.1 +| ${dst_ip}= | 2.2.2.2 +| ${teid}= | ${12345} +| ${rxq}= | ${4} +# Telemetry +| ${telemetry_profile}= | vpp_test_teardown + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Ver] Make TG send IP4-GTPU packet routed over DUT1 interfaces.\ +| | ... | Make VPP verify flow packet is correct. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer. Type: integer +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${rxq} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs | with_trace=${True} +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | +| | Clear Packet Trace On Dut | ${dut1} +| | Vpp Enable Traces On Dut | ${dut1} +| | ${flow_index} = | And Vpp Create Ip4 Gtpu Flow | ${dut1} +| | ... | ${src_ip} | ${dst_ip} | teid=${teid} +| | ... | action=redirect-to-queue | value=${${rxq}-1} +| | And Vpp Flow Enable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | Then Send flow packet and verify action +| | ... | ${tg} | ${TG_pf1}[0] | ${DUT1_${int}1_mac}[0] +| | ... | flow_type=IP4 | proto=GTPU +| | ... | src_ip=${src_ip} | dst_ip=${dst_ip} +| | ... | value=${teid} +| | ... | action=redirect-to-queue | action_value=${${rxq}-1} +| | And Vpp Flow Disable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | And Vpp Flow Del | ${dut1} | ${flow_index} +| | +| | Clear Packet Trace On Dut | ${dut1} +| | Vpp Enable Traces On Dut | ${dut1} +| | ${flow_index} = | And Vpp Create Ip4 Gtpu Flow | ${dut1} +| | ... | ${src_ip} | ${dst_ip} | teid=${teid} +| | ... | action=drop +| | And Vpp Flow Enable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | Then Send flow packet and verify action +| | ... | ${tg} | ${TG_pf1}[0] | ${DUT1_${int}1_mac}[0] +| | ... | flow_type=IP4 | proto=GTPU +| | ... | src_ip=${src_ip} | dst_ip=${dst_ip} +| | ... | value=${teid} +| | ... | action=drop +| | And Vpp Flow Disable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | And Vpp Flow Del | ${dut1} | ${flow_index} +| | +| | Clear Packet Trace On Dut | ${dut1} +| | Vpp Enable Traces On Dut | ${dut1} +| | ${flow_index} = | And Vpp Create Ip4 Gtpu Flow | ${dut1} +| | ... | ${src_ip} | ${dst_ip} | teid=${teid} +| | ... | action=mark | value=${7} +| | And Vpp Flow Enable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | Then Send flow packet and verify action +| | ... | ${tg} | ${TG_pf1}[0] | ${DUT1_${int}1_mac}[0] +| | ... | flow_type=IP4 | proto=GTPU +| | ... | src_ip=${src_ip} | dst_ip=${dst_ip} +| | ... | value=${teid} +| | ... | action=mark +| | And Vpp Flow Disable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index} +| | And Vpp Flow Del | ${dut1} | ${flow_index} + +*** Test Cases *** +| 64B-0c-ethip4-flow-ip4-gtpu-scapy +| | [Tags] | 64B | 0C +| | frame_size=${64} | phy_cores=${0} |