diff options
Diffstat (limited to 'tests/vpp/device/interfaces/eth2p-ethicmpv4-ip4base-eth-1tap-dev.robot')
| -rw-r--r-- | tests/vpp/device/interfaces/eth2p-ethicmpv4-ip4base-eth-1tap-dev.robot | 95 |
1 files changed, 95 insertions, 0 deletions
diff --git a/tests/vpp/device/interfaces/eth2p-ethicmpv4-ip4base-eth-1tap-dev.robot b/tests/vpp/device/interfaces/eth2p-ethicmpv4-ip4base-eth-1tap-dev.robot new file mode 100644 index 0000000000..066821c276 --- /dev/null +++ b/tests/vpp/device/interfaces/eth2p-ethicmpv4-ip4base-eth-1tap-dev.robot @@ -0,0 +1,95 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY +| ... | NIC_Virtual | ETH | IP4FWD | BASE | IP4BASE | 1TAP +| ... +| Suite Setup | Setup suite single link | scapy +| Test Setup | Setup test | namespace +| Test Teardown | Tear down test | packet_trace | namespace +| ... +| Test Template | Local Template +| ... +| Documentation | *Tap Interface Traffic Tests* +| ... | *[Top] Network Topologies:* TG=DUT1 2-node topology with two links +| ... | between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for L2 switching of +| ... | IPv4. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 +| ... | bridge-domain (L2BD) MAC learning enabled; Split Horizon Groups (SHG) +| ... | are set depending on test case; Namespaces (NM) +| ... | are set on DUT1 with attached linux-TAP. +| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets +| ... | are sent by TG on link to DUT1; On receipt TG verifies packets +| ... | for correctness and their IPv4 src-addr, dst-addr, and MAC addresses. +| ... | *[Ref] Applicable standard specifications:* + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${nic_name}= | virtual +| ${overhead}= | ${0} +| ${tap1_VPP_ip}= | 16.0.10.1 +| ${tap1_NM_ip}= | 16.0.10.2 +| ${tap1_NM_mac}= | 02:00:00:00:00:02 +| ${dut_ip_address}= | 192.168.0.1 +| ${tg_ip_address}= | 192.168.0.2 +| ${tg_ip_address_GW}= | 192.168.0.0 +| ${prefix}= | 24 + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] On DUT1 configure two interface addresses with IPv4 of which\ +| | ... | one is TAP interface (dut_to_tg_if and TAP) and one is linux-TAP. +| | ... | [Ver] Packet sent from TG gets to the destination and ICMP-reply is\ +| | ... | received on TG. +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer. Type: integer +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | And Set Max Rate And Jumbo And Handle Multi Seg +| | And Apply startup configuration on all VPP DUTs | with_trace=${True} +| | When Set interfaces in path up +| | ${int1}= | And Add Tap Interface | ${dut1} | tap0 +| | And VPP Interface Set IP Address +| | ... | ${dut1} | ${int1} | ${tap1_VPP_ip} | ${prefix} +| | And VPP Interface Set IP Address +| | ... | ${dut1} | ${dut1_if1} | ${dut_ip_address} | ${prefix} +| | And Set Interface State | ${dut1} | ${int1} | up +| | And Set Linux Interface MAC | ${dut1} | tap0 | ${tap1_NM_mac} +| | And Set Linux Interface IP | ${dut1} | tap0 | ${tap1_NM_ip} | ${prefix} +| | And Add Linux Route +| | ... | ${dut1} | ${tg_ip_address_GW} | ${prefix} | ${tap1_VPP_ip} +| | And VPP Add IP Neighbor +| | ... | ${dut1} | ${dut1_if1} | ${tg_ip_address} | ${tg_if1_mac} +| | And VPP Add IP Neighbor +| | ... | ${dut1} | ${int1} | ${tap1_NM_ip} | ${tap1_NM_mac} +| | Then Send ICMP echo request and verify answer +| | ... | ${tg} | ${tg_if1} | ${dut1_if1_mac} | ${tg_if1_mac} +| | ... | ${tap1_NM_ip} | ${tg_ip_address} + +*** Test Cases *** +| tc01-64B-eth2p-ethicmpv4-ip4base-eth-1tap-dev +| | [Tags] | 64B +| | frame_size=${64} | phy_cores=${0} |