diff options
Diffstat (limited to 'tests/vpp/device/ip4/eth2p-ethicmpv4-ip4base-dev.robot')
| -rw-r--r-- | tests/vpp/device/ip4/eth2p-ethicmpv4-ip4base-dev.robot | 81 |
1 files changed, 81 insertions, 0 deletions
diff --git a/tests/vpp/device/ip4/eth2p-ethicmpv4-ip4base-dev.robot b/tests/vpp/device/ip4/eth2p-ethicmpv4-ip4base-dev.robot new file mode 100644 index 0000000000..0ce0430ce3 --- /dev/null +++ b/tests/vpp/device/ip4/eth2p-ethicmpv4-ip4base-dev.robot @@ -0,0 +1,81 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY +| ... | NIC_Virtual | ETH | IP4FWD | BASE | IP4BASE +| ... +| Suite Setup | Setup suite single link | scapy +| Test Setup | Setup test +| Test Teardown | Tear down test | packet_trace +| ... +| Test Template | Local Template +| ... +| Documentation | *IPv4 routing test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for IPv4 routing on \ +| ... | both links. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and \ +| ... | two static IPv4 /24 route entries. +| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are sent in \ +| ... | one direction by TG on links to DUT1; on receive TG verifies packets \ +| ... | for correctness and their IPv4 src-addr, dst-addr and MAC addresses. +| ... | *[Ref] Applicable standard specifications:* RFC791, RFC826, RFC792 + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${nic_name}= | virtual +| ${overhead}= | ${0} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Ver] Make TG send ICMPv4 Echo Req routed over DUT1 interfaces.\ +| | ... | Make TG verify ICMPv4 Echo Reply is correct. +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer. Type: integer +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | And Set Max Rate And Jumbo And Handle Multi Seg +| | And Apply startup configuration on all VPP DUTs | with_trace=${True} +| | When Initialize IPv4 forwarding in circular topology +| | ... | remote_host1_ip=192.168.0.1 | remote_host2_ip=192.168.0.2 +| | Then Send IPv4 ping packet and verify headers +| | ... | ${tg} | ${tg_if1} | ${dut1} | ${dut1_if2} +| | ... | 10.10.10.2 | 20.20.20.1 | ${dut1_if1_mac} | ${0} +| | Then Send IPv4 ping packet and verify headers +| | ... | ${tg} | ${tg_if1} | ${dut1} | ${dut1_if1} +| | ... | 10.10.10.2 | 10.10.10.1 | ${dut1_if1_mac} | ${0} +| | Then Send IPv4 ping packet and verify headers +| | ... | ${tg} | ${tg_if1} | ${tg} | ${tg_if2} +| | ... | 10.10.10.2 | 20.20.20.2 | ${dut1_if1_mac} | ${1} +| | Then Send IPv4 ping packet and verify headers +| | ... | ${tg} | ${tg_if1} | ${tg} | ${tg_if2} +| | ... | 192.168.0.1 | 192.168.0.2 | ${dut1_if1_mac} | ${1} + +*** Test Cases *** +| tc01-64B-ethicmpv4-ip4base-dev +| | [Tags] | 64B +| | frame_size=${64} | phy_cores=${0} |